 Tue May 5 02:19:58 2015, j.Agramunt J.L.Tain K.Gabor , The Lower polyethylene pieces was swamped 
|
The Lower polyethylene pieces was swamped.
In the photo beam comes from the left.
|
|
Tue Jun 13 07:35:35 2017, briken team, 133Ba calibration
|
After experiment 133Ba calibration
Working directory: /data/1706FinalCalibrations
Configuration file: 170604_Conf_BrikenFull_AfterCrisis.xlsx
DLT file name: 170613_1533_133Ba_001.dlt
Start: 15:33
Stop: 15:59
Online rootfile: 133Ba_cal_z0_1533_1559_170613.root
COMMENTS:
1. Source centered in both BRIKEN and clovers (faced towards clover D4)
2. No AIDA in
3. D4 clover pulsers are at 253, 260, 265, and 271 keV
4. G7 clover pulsers are beyond 5 MeV. No pulser for crystal G7Green |
|
Tue Jun 13 08:02:35 2017, briken team, 133Ba calibration
|
After experiment 133Ba calibration
Working directory: /data/1706FinalCalibrations
Configuration file: 170604_Conf_BrikenFull_AfterCrisis.xlsx
DLT file name: 170613_1601_133Ba_002.dlt
Start: 16:02
Stop: 12:25 (2017/06/14)
Online rootfile: 133Ba_cal_z0_1602_1227nextday_170613.root
COMMENTS:
1. Source centered in both BRIKEN and clovers (faced towards clover D4)
2. No AIDA in
3. D4 clover pulsers are at 253, 260, 265, and 271 keV
4. G7 clover pulsers are beyond 5 MeV. No pulser for crystal G7Green
5. During the lasts dlt files (170613_1601_133Ba_009.dlt and 170613_1601_133Ba_010.dlt) the source was removed from the center of BRIKEN.
|
|
Mon Nov 28 05:59:28 2016, briken , run
|
======= START =======
Date 2016/11/28
Start time : 11:12
BRIKEN run : 056
Daq Conf. File : 161128Conf_BrikenFull.xlsx
DLT File name : 161128_1112
AIDA run : R28-0
AIDA start : 11:08
BigRIPS run : 1049
BigRIPS start : 09:15
---------------------------
Shifters: AT GK KD
======= Setup =======
Central fragment: 41Al @F8
--- Degraders ---
Fixed: 3mm Pb between Musics chambers
Included lead shieldings around the beam.
Variable:
1=(0.5mm W+1mm Al), 2=(0.3mm W+1mm Al), 3=(1mm W +1mm Al)
1. OUT
2. IN
3. IN
======= COMMENTS =======
09:13 Clover G7Red Plugged in again.
AIDAPL gain has been increased by SN from 900V to 1000V.
------ Rates ------
BRIKEN : Hz
F11R : Hz
Clovers : Hz
VPLT : Hz
VPLB : Hz
AIDAPL : Hz
========= END =========
Date 2016/11/28
BRIKEN run :
BRIKEN stop :
ROOT online :
AIDA run :
AIDA stop :
BigRIPS RUN : |
|
Sat Apr 1 17:45:01 2017, YS,CG,LIU, 37Na, run 68
|
Date: 2/04/2017
Start:01:44
BRIKEN run: 68
AIDA Run: R20_365
BigRIPS run: 224
DLT:170402_0144_Na37_068.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 2/04/2017
Stop: 02:46
BRIKEN run: 68
AIDA Run: R20_381
BigRIPS run: 224
Root file:
OBSERVATIONS: |
|
Sat Apr 1 19:48:41 2017, YS,CG,LIU, 37Na,run 70
|
Date: 2/04/2017
Start:03:47
BRIKEN run: 70
AIDA Run: R20_394
BigRIPS run: 226
DLT:170402_0347_Na37_070.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 2/04/2017
Stop: 04:47
BRIKEN run: 70
AIDA Run: R20_410
BigRIPS run: 226 |
|
Sat Apr 1 16:17:59 2017, YS,CG, LIU, 37Na run 67
|
Date: 2/04/2017
Start:00:17
BRIKEN run: 67
AIDA Run: R20_345
BigRIPS run: 223
DLT:170402_0017_Na37_067.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 2/04/2017
Stop: 01:41
BRIKEN run: 67
AIDA Run: R20_364
BigRIPS run: 223
Root file:
OBSERVATIONS: beam was stopped at 01:41 |
|
Sat Apr 1 21:37:42 2017, YS, Liu, CG, 37Na run 71
|
Date: 2/04/2017
Start:04:47
BRIKEN run: 71
AIDA Run: R20_410
BigRIPS run: 227
DLT:170402_0447_Na37_071.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 2/04/2017
Stop: 05:29
BRIKEN run: 71
AIDA Run: R20_420
BigRIPS run: 227
Root file:
OBSERVATIONS: The beam with this setting is finished and the BigRIPS team starts calibration runs. The beam will
not be delivered to ZDS. |
|
Fri Mar 31 21:45:25 2017, YS, LIU, OH, DK, 37Na run 50
|
Date: 1/04/2017
Start: 05:45
BRIKEN run: 50
AIDA Run: R20_65
BigRIPS run: 202
DLT: 170401_0544_Na37_050.dlt
BRIKEN Rate: 2 cps
F11 Rate: 8 cps
Date: 1/04/2017
Stop: 06:17
BRIKEN run: 50
AIDA Run: R20_72
BigRIPS run: 202
Root file:
OBSERVATIONS: Beam stopped at around 06:17am (BigRIPS control system crash?). |
|
Fri Mar 31 19:31:15 2017, YS, LIU, OH, CG, 37Na, run47
|
Date: 1/04/2017
Start: 03:30
BRIKEN run: 47
AIDA Run: R20_28
BigRIPS run: 199
DLT: 170401_0330_Na37_047.dlt
BRIKEN Rate: 2 cps
F11 Rate: 8 cps
Date: 1/04/2017
Stop: 04:38
BRIKEN run: 47
AIDA Run: R20_46
BigRIPS run: 199
Root file:
OBSERVATIONS: |
|
Fri Mar 31 20:40:47 2017, YS, LIU, OH, 37Na run 48
|
Date: 1/04/2017
Start: 04:38
BRIKEN run: 48
AIDA Run: R20_47
BigRIPS run: 200
DLT: 170401_0438_Na37_048.dlt
BRIKEN Rate: 2 cps
F11 Rate: 8 cps
Date: 1/04/2017
Stop: 04:59
BRIKEN run: 48
AIDA Run: R20_52
BigRIPS run: 200
Root file:
OBSERVATIONS: At the beginning of the run the rate was low (BRIKEN 0.5cps and F11 4cps) for about 0.4x10^6 ms but it got back to around the previous value (BRIKEN 2cps and F11 8cps). |
|
Fri Mar 31 21:00:57 2017, YS, LIU, OH, 37Na run 49
|
Date: 1/04/2017
Start: 04:59
BRIKEN run: 49
AIDA Run: R20_53
BigRIPS run: 201
DLT: 170401_0459_Na37_049.dlt
BRIKEN Rate: 2 cps
F11 Rate: 8 cps
Date: 1/04/2017
Stop: 05:44
BRIKEN run: 49
AIDA Run: R20_64
BigRIPS run: 201
Root file:
OBSERVATIONS: BigRIPS run 201 started at 04:45am. |
|
Fri Mar 31 22:22:40 2017, YS, LIU, DK, 37Na run 51
|
Date: 1/04/2017
Start: 06:23
BRIKEN run: 51
AIDA Run: R20_74
BigRIPS run: 203
DLT: 170401_0544_Na37_051.dlt
*forgot to change the time in the dlt file name
**now the file name is corrected: 170401_0623_Na37_051.dlt
BRIKEN Rate: 2 cps
F11 Rate: 8 cps
Date: 1/04/2017
Stop: 06:43
BRIKEN run: 51
AIDA Run: R20_79
BigRIPS run: 203
Root file:
OBSERVATIONS: BigRIPS 36Ne setting with new foil |
|
Fri Mar 31 22:45:21 2017, YS, LIU, DK, 37Na run 52
|
Date: 1/04/2017
Start: 06:45
BRIKEN run: 52
AIDA Run: R20_80
BigRIPS run: 204
DLT: 170401_0645_Na37_052.dlt
BRIKEN Rate: 2 cps
F11 Rate: 8 cps
Date: 1/04/2017
Stop: 07:41
BRIKEN run: 52
AIDA Run: R20_94
BigRIPS run: 204
Root file:
OBSERVATIONS: Lots of PPAC alarms (every 5min or so) |
|
Sat Apr 1 18:48:20 2017, YS, LIU, CG, 37Na run 69
|
Date: 2/04/2017
Start:02:47
BRIKEN run: 69
AIDA Run: R20_381
BigRIPS run: 225
DLT:170402_0247_Na37_069.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 2/04/2017
Stop: 03:46
BRIKEN run: 69
AIDA Run: R20_394
BigRIPS run: 225
Root file:
OBSERVATIONS: |
|
Sun May 28 11:41:24 2017, YS, CLOVER energy calibration
|
Clover calibration with 152Eu
Used peaks [keV]: 121.7817, 244.6975, 344.2785, 444.000, 778.9045, 867.378, 964.100, 1112.074, 1408.011
Up to 444keV is lower energy region, above 778.9045 is higher energy region.
All the peaks were fitted with Gaussian + Second Order Plolinomial(background) + Step Function(background).
Parameters: Second Order, First Order, Offset
ID 152 Lower: 1.14254e-08, 1.57915, 408.94
ID 152 Higher: -3.90753e-10, 1.58167, 1224.11
ID 153 Lower: -7.33088e-09, 1.54588, 264.002
ID 153 Higher: 4.72241e-09, 1.53548, 3541.56
ID 154 Lower: -4.45069e-08, 1.54978, -626.916
ID 154 Higher: -4.48059e-08, 1.58933, -14795.7
ID 155 Lower: -5.93726e-10, 0.666536, 230.739
ID 155 Higher: 1.74281e-09, 0.659392, 3973.56
ID 156 Lower: -4.00636e-09, 0.708287, -509.227
ID 156 Higher: 9.5416e-11, 0.705004, -1574.59
ID 157 Lower: -2.94588e-09, 0.686728, -572.626
ID 157 Higher: 3.24943e-10, 0.683273, -1684.07
ID 158 Lower: 1.30198e-09, 0.668335, 485.045
ID 158 Higher: -4.572e-10, 0.67108, -3189.18
ID 159 Lower: -4.37028e-09, 0.701927, -666.22
ID 159 Higher: 3.40354e-09, 0.685865, 8115.55 |
|
Mon May 29 04:17:34 2017, YS, Clover Efficiency
|
Clover gamma detection efficiency calculation with 152Eu
Date of the measurement: 2017-05-26 10:15
root file: 170526_1015_152Eu_noAIDA_z0cm_014.root
Gamma Energy[keV] {121.781700, 244.697500, 344.278500, 444.000000, 778.904500, 867.378000, 964.100000,
1112.074000, 1408.011000}
Crystal ID 152 Efficiency[%] {1.536508, 0.978779, 0.736707, 0.591553, 0.359426, 0.338228, 0.300229, 0.272331,
0.220314}
Crystal ID 152 Efficiency Error {0.030465, 0.021204, 0.014732, 0.016358, 0.008284, 0.011340, 0.006673,
0.006173, 0.004757}
Crystal ID 153 Efficiency[%] {1.679147, 1.051609, 0.799702, 0.628184, 0.386672, 0.387489, 0.328493, 0.300337,
0.236573}
Crystal ID 153 Efficiency Error {0.033341, 0.023338, 0.016004, 0.017827, 0.008906, 0.013626, 0.007298,
0.006773, 0.005071}
Crystal ID 154 Efficiency[%] {1.402847, 0.922081, 0.696455, 0.593818, 0.348820, 0.341118, 0.298197, 0.276055,
0.215494}
Crystal ID 154 Efficiency Error {0.027933, 0.020478, 0.014004, 0.017865, 0.008087, 0.012283, 0.006708,
0.006288, 0.004660}
Crystal ID 155 Efficiency[%] {1.329735, 0.886053, 0.665180, 0.559708, 0.340513, 0.340755, 0.288800, 0.261229,
0.202480}
Crystal ID 155 Efficiency Error {0.026511, 0.020274, 0.013378, 0.016628, 0.007732, 0.010686, 0.006432,
0.005958, 0.004413}
Crystal ID 156 Efficiency[%] {1.163705, 0.757446, 0.548990, 0.465020, 0.282777, 0.294110, 0.237165, 0.220572,
0.155430}
Crystal ID 156 Efficiency Error {0.023277, 0.017832, 0.011114, 0.014924, 0.006765, 0.010733, 0.005496,
0.005160, 0.003514}
Crystal ID 157 Efficiency[%] {1.420320, 0.906654, 0.672645, 0.536032, 0.347827, 0.346548, 0.298879, 0.269536,
0.196238}
Crystal ID 157 Efficiency Error {0.028367, 0.020536, 0.013537, 0.016528, 0.008115, 0.012147, 0.006664,
0.006128, 0.004314}
Crystal ID 158 Efficiency[%] {1.271836, 0.790926, 0.591132, 0.494340, 0.311442, 0.295866, 0.255764, 0.227822,
0.168103}
Crystal ID 158 Efficiency Error {0.025589, 0.018723, 0.011955, 0.015706, 0.007457, 0.010690, 0.005849,
0.005296, 0.003762}
Crystal ID 159 Efficiency[%] {1.268501, 0.806356, 0.588627, 0.511611, 0.297958, 0.326487, 0.252316, 0.231872,
0.175679}
Crystal ID 159 Efficiency Error {0.025339, 0.018906, 0.011939, 0.016912, 0.007159, 0.011892, 0.005740,
0.005411, 0.003900}
Total Efficiency[%] {11.072600, 7.099903, 5.299439, 4.380266, 2.675436, 2.670601, 2.259844, 2.059754, 1.570310}
Total Efficiency Error {0.078525, 0.057205, 0.037954, 0.047007, 0.022172, 0.033133, 0.018054, 0.016749, 0.012242}
Fitting Function: 10^{p_0 + p_1*ln(x) + p_2*ln^2(x) + p_3/x^2} (This is the function used in the textbook
"Radiation detection and measurement" by G.Knoll)
Parameters
Total (two clovers):
p_0 = 2.29172e-01 +/- 1.13185e-02
p_1 = 9.48436e-01 +/- 8.89344e-04
p_2 = -1.54934e-01 +/- 7.58240e-05
p_3 = 1.89920e+06 +/- 1.18292e+09
ID152:
FCN=1.11317 FROM HESSE STATUS=NOT POSDEF 23 CALLS 325 TOTAL
EDM=1.40411e-09 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 8.09248e+00 4.00474e-02 1.92940e-06 7.13568e-03
2 p1 -2.02411e+00 8.19548e-03 4.82585e-07 4.27674e-02
3 p2 9.78402e-02 1.18086e-03 2.33269e-08 2.59077e-01
4 p3 -2.11550e+09 1.97563e+08 5.04375e+02 2.35344e-13
ID153:
FCN=7.1582 FROM HESSE STATUS=NOT POSDEF 23 CALLS 345 TOTAL
EDM=1.28369e-11 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 5.98204e+00 4.02864e-02 1.42623e-06 1.27251e-03
2 p1 -1.30120e+00 8.24403e-03 3.10231e-07 7.00775e-03
3 p2 3.70097e-02 1.18706e-03 2.80719e-08 3.85335e-02
4 p3 -1.43256e+09 1.97976e+08 3.41550e+02 1.75334e-14
ID154:
FCN=7.31777 FROM HESSE STATUS=NOT POSDEF 23 CALLS 300 TOTAL
EDM=7.25203e-09 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 4.60707e+00 4.07462e-02 1.09841e-06 -1.28042e-02
2 p1 -8.62719e-01 8.33215e-03 2.05688e-07 -8.63564e-02
3 p2 9.84262e-04 1.20127e-03 2.86738e-08 -5.66097e-01
4 p3 -1.45278e+09 2.00179e+08 3.46370e+02 5.24463e-13
ID155:
FCN=8.93044 FROM HESSE STATUS=NOT POSDEF 23 CALLS 325 TOTAL
EDM=1.56376e-09 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 3.36149e-01 4.05951e-02 1.02424e-06 1.66747e-02
2 p1 5.96907e-01 8.27701e-03 1.78992e-07 9.42383e-02
3 p2 -1.24128e-01 1.19514e-03 3.10496e-08 5.35879e-01
4 p3 -5.49707e+08 1.98933e+08 1.31060e+02 2.34852e-13
ID156:
FCN=27.107 FROM HESSE STATUS=NOT POSDEF 23 CALLS 369 TOTAL
EDM=1.72237e-10 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -6.26350e+00 4.21430e-02 1.78695e-06 -4.63010e-03
2 p1 2.85365e+00 8.58127e-03 6.80363e-07 -2.64484e-02
3 p2 -3.19389e-01 1.24245e-03 7.61484e-08 -1.51241e-01
4 p3 1.16616e+09 2.05264e+08 2.78034e+02 -1.93778e-14
ID157:
FCN=19.4716 FROM HESSE STATUS=NOT POSDEF 23 CALLS 342 TOTAL
EDM=1.04278e-08 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -3.89605e+00 4.09683e-02 1.48832e-06 3.26076e-02
2 p1 2.04214e+00 8.37584e-03 4.86884e-07 1.83059e-01
3 p2 -2.47352e-01 1.20710e-03 5.89732e-08 1.02761e+00
4 p3 9.13701e+08 2.00155e+08 2.17843e+02 1.24035e-13
ID158:
FCN=7.59955 FROM HESSE STATUS=NOT POSDEF 23 CALLS 331 TOTAL
EDM=1.78742e-08 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -8.46924e+00 4.17987e-02 2.01922e-06 -1.01596e-03
2 p1 3.60905e+00 8.55091e-03 8.60466e-07 8.06431e-03
3 p2 -3.83202e-01 1.23257e-03 9.13624e-08 1.28451e-01
4 p3 1.94705e+09 2.02809e+08 4.64212e+02 1.90916e-13
ID159:
FCN=24.8135 FROM HESSE STATUS=NOT POSDEF 27 CALLS 314 TOTAL
EDM=7.91895e-10 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -1.15142e+00 4.18270e-02 1.70735e-06 3.54687e-03
2 p1 1.09795e+00 8.55588e-03 2.98767e-07 1.75400e-02
3 p2 -1.67863e-01 1.23250e-03 5.18807e-08 8.63094e-02
4 p3 1.96354e+08 2.02197e+08 4.87057e+05 3.05910e-13
For comparison: EURICA total efficiency - see attachment 3 |
|
Fri Dec 1 07:29:47 2017, Vi Ho Phong, [Hardware][Configuration] Return the PB-5 Pulse generator (Pulser 2) and the 428F Linear Fan in-out modules and replace with a new Linear Fan in-out module 7x
|
The PB-5 Pulse generator labeled "Pulser 2" and the 428F Linear Fan in-out labeled "Clover G7" from BRIKEN NIM crate have to be returned to the RIBF electronics pool because the
borrowing time is expired.
For the Pulser 2, the external trigger input and pulse output cables were labeled before removing the module.
- Attachment 1: Original position and cabling of the pulser. The serial number of the pulser is 052010010247
- Attachment 2: A picture of the crate after removing the pulser.
- Attachment 3: Original Pulser setting.
The Linear Fan in-out was replaced with a new module (same version 428F), which can be used for a long time. The position of the input and output cables in the module were kept
unchanged.
- Attachment 4: Original position and cabling of the Linear Fan in-out module. The serial number of the original module is 051999070282
- Attachment 5: New Linear Fan in-out module after replacement.
- Attachment 6: Oscilloscope view of the 10kHZ NIM test input signal (blue) and output signal (yellow) of the old Linear fan in-out module.
- Attachment 7: Oscilloscope view of the 10kHZ NIM test input signal (blue) and output signal (yellow) of the new Linear fan in-out module. |
|
Sat Apr 1 10:15:44 2017, VP,OH,JLT, 37Na run 60
|
Date: 1/04/2017
Start:17:40
BRIKEN run: 60
AIDA Run: R20_247
BigRIPS run: 215
DLT:170401_1740_Na37_060.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 1/04/2017
Stop: 18:05
BRIKEN run: 60
AIDA Run: R20_254
BigRIPS run: 215
Root file:
OBSERVATIONS:stop because of schange of stripper foil |
|
Sat Apr 1 10:26:07 2017, VP,OH,JLT, 37Na run 61
|
Date: 1/04/2017
Start:18:25
BRIKEN run: 61
AIDA Run: R20_259
BigRIPS run: 216
DLT:170401_1825_Na37_061.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 1/04/2017
Stop: 19:09
BRIKEN run: 61
AIDA Run: R20_271
BigRIPS run: 216
Root file:
OBSERVATIONS: We restarted the DACQ (and the synchronization)
because the program was refusing to save the ROOT file with histograms
New Conf file:170401_Conf_BrikenFull.xlsx
(contains the changes made online before (see entry 273) |
|