ID |
Date |
Author |
Subject |
103
|
Thu Nov 3 05:27:48 2016 |
Alvaro, Tain, Gabor, Ale | 152Eu |
Energy calibration for clovers, 152Eu
The Eu source positioned in the center roughly.
File name: 161103_1426_152Eu.root |
Attachment 1: 161103_1426_152Eu.root
|
205
|
Tue Mar 28 09:10:09 2017 |
Many | 152Eu |
152Eu source inside BRIKEN for CLOVER calibration.
Also calibration of Si-dE with 60Co source
and AIDA_PL calibration with 60Co source.
File: 170328_1707_152Eu_CloverCal.root
Calibration parameters in file:
170328_1707_CloverCalibration.ods
(attached) |
Attachment 1: 170328_1707_152Eu_CloverCal.root
|
Attachment 2: 170328_1707_CloverCalibration.ods
|
304
|
Fri May 26 02:17:40 2017 |
AT, AIM, JLT,AA, PV, KM | 152Eu |
Calibration with 152Eu source.
START time:10:15
DLT:170526_1015_152Eu_noAIDA_z0cm_014.dlt
STOP time:11:16
ROOT:170526_1015_1116_152Eu_z0cm.root
COMMENTS:
1. Source centered in both BRIKEN and clovers
2. No AIDA in
3. D4 clover pulsers are at 253, 260, 265, and 271 keV
4. G7 clover pulsers are beyond 5 MeV. No pulser for crystal G7Green |
345
|
Mon Oct 23 09:43:00 2017 |
RG, RY, MS, SG, AT | 137Cs YSO |
measurement of 137Cs with YSO
after matching the gains of the
HighGain channels
YSO detector was inside the black box, outside the matrix.
The source was placed in front of the YSO
First measurement
Start: 15:14
End: 16:55
RootFile: 171023_1655_137CsYSO.root
Second measurement (same conditions )
Start: 16:55
Run number: 070
End: 17:41
File: 171023_1655_137CsYSO_070.dlt
RootFile: 171023_1655_1741_137CsYSO_070.root
The 137Cs source is weak; the rate of the YSO detector was about 50Hz (without source is 10Hz). |
Attachment 1: 171023_1655_137CsYSO.root
|
Attachment 2: 171023_1655_1741_137CsYSO_070.root
|
Attachment 3: Screenshot_from_2017-10-23_17-51-37.png
|
|
Attachment 4: Screenshot_from_2017-10-23_17-54-53.png
|
|
405
|
Fri Nov 2 14:18:54 2018 |
JLT | 136Sn at ZDS |
Measurement of neutron background while
Jungclaus experiment is running
Secondary beam 136Sn at ~140MeV/u, Be target, 136Sn in the ZDS
Start: 23:17
Stop:
DLT: 181102_2317_136Sn_Be_136Sn_131.dlt
Online: 181102_2338_136Sn_Be_136Sn.root
F11 Rate: 7 kcps
BRIKEN Rate: 3.2 kcps |
404
|
Fri Nov 2 01:07:21 2018 |
JLT | 134Sn/133In on ZDS |
Measurement of neutron background while
Jungclaus experiment is running
Secondary beam:
134Sn at ~140MeV/u, Au target, 134Sn in the ZDS
after 2:00 AM: 134Sn at ~140MeV/u, Be target, 133In in the ZDS
Long run
Start: 17:37
Stop: 10:08 (2018/11/02)
tmeas=59400s (16.5h)
DLT: NO
Online: 181102_1008_134Sn_AuBe_134Sn133In.root
F11 Rate: 11.5 kcps
BRIKEN Rate: 3 kcps |
Attachment 1: Screenshot_from_2018-11-02_10-17-34.png
|
|
Attachment 2: Screenshot_from_2018-11-02_10-20-20.png
|
|
Attachment 3: Screenshot_from_2018-11-02_10-21-50.png
|
|
403
|
Wed Oct 31 03:41:33 2018 |
JLT | 134Sn at ZDS |
Measurement of neutron background while
Jungclaus experiment is running
Secondary beam 134Sn at ~140MeV/u, Au target, 134Sn in the ZDS
Start: 12:40
Stop: 13:01
DLT: 181031_1240_134Sn_Au_134Sn_129.dlt
Online: 181031_1301_134Sn_Au_134Sn.root
F11 Rate: 11.5 kcps
BRIKEN Rate: 3 kcps |
402
|
Wed Oct 31 00:36:34 2018 |
JLT | 133In at ZDS |
Measurement of neutron background while
Jungclaus experiment is running
Secondary beam 134Sn at XXMeV, Be target, 133In i the ZDS
Start: 9:35
Stop: 9:55
DLT: 181031_0935_134Sn_Be_133In_127.dlt
Online:181031_0955_134Sn_Be_133In.root
F11 Rate: 11.5 kcps
BRIKEN Rate: 3 kcps |
325
|
Tue Jun 13 07:35:35 2017 |
briken team | 133Ba calibration |
After experiment 133Ba calibration
Working directory: /data/1706FinalCalibrations
Configuration file: 170604_Conf_BrikenFull_AfterCrisis.xlsx
DLT file name: 170613_1533_133Ba_001.dlt
Start: 15:33
Stop: 15:59
Online rootfile: 133Ba_cal_z0_1533_1559_170613.root
COMMENTS:
1. Source centered in both BRIKEN and clovers (faced towards clover D4)
2. No AIDA in
3. D4 clover pulsers are at 253, 260, 265, and 271 keV
4. G7 clover pulsers are beyond 5 MeV. No pulser for crystal G7Green |
326
|
Tue Jun 13 08:02:35 2017 |
briken team | 133Ba calibration |
After experiment 133Ba calibration
Working directory: /data/1706FinalCalibrations
Configuration file: 170604_Conf_BrikenFull_AfterCrisis.xlsx
DLT file name: 170613_1601_133Ba_002.dlt
Start: 16:02
Stop: 12:25 (2017/06/14)
Online rootfile: 133Ba_cal_z0_1602_1227nextday_170613.root
COMMENTS:
1. Source centered in both BRIKEN and clovers (faced towards clover D4)
2. No AIDA in
3. D4 clover pulsers are at 253, 260, 265, and 271 keV
4. G7 clover pulsers are beyond 5 MeV. No pulser for crystal G7Green
5. During the lasts dlt files (170613_1601_133Ba_009.dlt and 170613_1601_133Ba_010.dlt) the source was removed from the center of BRIKEN.
|
160
|
Fri Nov 25 03:15:46 2016 |
AT | Background Beam ON |
16/11/24 19h38min:
Background measurement during tunning of BigRips from 27-29F to 22C is started.
Files:
161124_1938_012.dlt
161124_1938_012.root |