| ID |
Date |
Author |
Subject |
Text |
 |
|
364
|
Wed Mar 2 14:15:16 2022 |
JM, PM | Current status | 15:15
Temperature setpoint = 113 K
Target density is OK for now. S1 |
6x | |
363
|
Wed Mar 2 09:38:50 2022 |
Spillmann, Uwe | ion source restarted |
detector position
out: 23.1mm |
| |
362
|
Wed Mar 2 06:00:49 2022 |
Spillmann, Uwe | waiting | 07:00
Target density is hovering between
2.0e-8 and 2.3e-8 |
| |
361
|
Wed Mar 2 03:40:40 2022 |
David, George | Temperature Cycle | 04:40
Target density is hovering between
2.0e-8 and 2.3e-8, sometimes dipping below |
| |
360
|
Wed Mar 2 01:24:48 2022 |
David, George | Ion Source Update | 02:25
Zoran was unable to ignite the ion
source. |
| |
359
|
Tue Mar 1 23:43:15 2022 |
David, George | Beam Intensity Drop | 00:38
Intensity in the ring dropped by 2
orders of magnitude to 5e5 on injection |
| |
358
|
Tue Mar 1 23:30:04 2022 |
David, George | Current status | 00:30
Pressure in S1 slightly decreased
from before but still high enough to measure |
| |
357
|
Tue Mar 1 22:10:26 2022 |
David, George | Current status | Ring current 6.67e7 particles/s
pressure at S1: 2.3-2.8e-8
Merger, Tape server (WS3): |
| |
356
|
Tue Mar 1 21:34:06 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
355
|
Tue Mar 1 20:41:28 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
354
|
Tue Mar 1 19:41:24 2022 |
PM, LV | target temperature walkthrough | A target temperature walkthrough has been
initiated at 20:41 since the target density
at S1 had slightly decreased (with ~0.1-0.2) |
| |
353
|
Tue Mar 1 19:40:28 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
12x | |
352
|
Tue Mar 1 18:43:41 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
351
|
Tue Mar 1 17:36:04 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
350
|
Tue Mar 1 16:57:34 2022 |
CB, LV, PMH | New run | Beam issues due to too long storage time
in the last hours. Motors moved out and not
moving. |
| |
349
|
Tue Mar 1 14:01:01 2022 |
MS, SHB | check | 'Check Clock Status', 'Check
ADC Calibration' and 'Check the White
rabbit decoder status' : no change |
11x | |
348
|
Tue Mar 1 12:58:32 2022 |
CB, MS, SS, ML | Synced pneumatic motion | New run R84
Attempting to sync pneumatic movement
with ring. Still see something on t out -> |
| |
347
|
Tue Mar 1 12:33:21 2022 |
MS, SHB | check | 'Check Clock Status', 'Check
ADC Calibration' and 'Check the White
rabbit decoder status': no change |
11x | |
346
|
Tue Mar 1 10:43:36 2022 |
MS, SHB | check | 'Check Clock Status', 'Check
ADC Calibration' and 'Check the White
rabbit decoder status': same |
11x | |
345
|
Tue Mar 1 10:35:59 2022 |
MS, SHB | next run on tape server tab | old potentiometer position 19.1 mm
new run number: 83
new potentiometer position : 27.58 |
|
|