 Thu May 29 18:04:47 2025, LB, CB, PMH, JM, Run 32,33,34 7x
|
Oven temperature increased, current up to 3.5E7 pps.
Found beam-target overlap setting horizontal bump in RO9 to -2.5mm.
Target T1 30.5K, density increasing to 2.6E11 at/cm2. |
|
Thu May 29 14:39:52 2025, CB LB PMH, Run 31 9x
|
15:40
Waiting for Serge to come in to change beam energy.
Remaining at the same beam energy and settings as before, except RIGHT arm now moving. |
|
Wed May 28 16:40:48 2025, EH, SN, LB, OF, EBM, CB, Run 28/29/30 - 1.88 MeV/A 37x
|
We start a new run with real data taking condititon: beam is ok, target density is 1e12 cm-2, detectors are moving in-out periodically.
Cooler voltage setpoint 1066.6 V. Read value 1068 V. |
|
Wed May 28 10:54:14 2025, LB, Run 27
|
Run 27 running
28/05/2025
(ignore 26 - in-between run) |
|
Tue May 27 22:20:11 2025, CB, LB,PW, Run 25 - 1.99/2.02 MeV/A 27x
|
23:20
JM thinks we cannot see 7Be locus on run 24. Possibly the right arm cannot get close enough.
Stopped moving right arm |
|
Tue May 27 15:18:46 2025, JG, CN, JM, run 24 7x
|
Run 24 running
27/05/2025
We start a new run with real data taking condititon: beam is ok, target density is 5e11 cm-2, detectors are moving in-out periodically. |
|
Tue May 27 12:49:48 2025, ML, Ion beam / electron beam settings so far.
|
| Screenshots and ParamModi settings export attached. |
|
Tue May 27 08:38:29 2025, TD, [How To] Recover DAQ when one FEE64 stops sending data - short(er) version
|
1) Select 'No Storage' [workspace 4, display 1, browser tab 'TapeServer']
If already in 'No Storage' mode please ignore this step
|
|
Tue May 27 05:24:05 2025, LB,SN, L. Cs. P. J. W., Run 22, 23 - 1.95 MeV/A 8x
|
27/05/2025 ca. 6:00
We start a new run: beam is ok, target density ok, detectors are moving in-out periodically.
Cooler voltage setpoint 1105.7 V |
|
Tue May 27 05:03:41 2025, JM, DAQ restart 7x
|
06:00
FEE modules power cycled.
No issues on power cycle restart. |
|
Mon May 26 18:37:17 2025, LC, AG, LB, SN, Run 21 12x
|
Run 21 running
26/05/2025 19:42 p.m.
We start a new run with real data taking condititon: beam is ok, target density is 1.1e12 cm-2, detectors are moving in-out periodically. |
|
Mon May 26 08:56:56 2025, EM,LB, Run20 8x
|
Run 20 running
We start a new run since the laser guys will do some measurements.
Zoran will increase the beam intensity |
|
Sat May 24 18:27:55 2025, EM, LC, Background runs continued R17-R19 36x
|
Summary: Target not running. Background runs written to disk, some with beam some without.
19:27 Data file R17 running
DSSSD positions out. Nikos will work on the target. |
|
Sat May 24 08:28:14 2025, TD, EM, Background runs R13-R16 29x
|
Summary: Target not running. Some background files written to disk, some with beam some without.
09.27 DAQ going
|
|
Fri May 23 09:19:40 2025, SN, TD, Target wait, switch lithium oven 18x
|
10.12 DAQ, Merger & Tape Server running OK - no storage mode
|
|
Thu May 22 06:41:10 2025, JG, TD, R6 - R11 scrapers test / pulser walk 33x
|
07.00
JG found target off (target data stopped c. 02.30 this morning) and beam off (not re-enabled from previous CRYRNG area entry - target related?) JG re-enables |
|
Wed May 21 14:38:22 2025, JM, TD, R4 and R5 - background 7x
|
15:30
Waiting for the target to cool down. ETA is 16:30 for cooling to be finished and then we need to try and make target.
While waiting we havve been running a background (R3). I noticed the rates on aida10 had increased (300k) and aida09 were slowlly creeping up |
|
Tue May 20 19:38:36 2025, JM, CARME restart 6x
|
19:00
Arrived at GSI.
We have 6Li1+ beam in the ring at 2 MeV/u. Injection is about 2.5e7 pps and lifetime with no target is about 40 seconds. We have injection every |
|
Sat May 17 11:19:06 2025, JM, Shifter intructions 2025
|
EMERGENCY SHUTDOWNS
1. CARME motors: Q key on keyboard while on workspace 1 of appc218 (right of this double-monitor setup)
2. Internal target: |
|
Tue May 13 15:07:42 2025, JM, Online monitoring code
|
CARME_Sort histogramming has been updated to aid our understanding online.
> XY plots have been updated to reflect the true position of the beam relative to each detector. Online we will be able to layout in a grid
to reflect looking downstream in YR09 (see attachment 1) |