| ID |
Date |
Author |
Subject |
|
81
|
Fri Nov 1 14:17:15 2019 |
Nic, Patrick | Reply: WR Timestamps |
> > All 12 FEEs have valid WR Timestamps
> > Had to powercycle aida09 once as before raw readout was displaying upper 12 bits of WR timestamp as 0. Unsure of other method.
> >
> > HDMI cables in aida09 checked and good.
>
> The problem would be the cable , one end or the other.
> I think ( if I recall ) a setup would restart the WR decoder.
>
> I notice you have set the WR info word rate to be quite high , 6123/sec typ, is this intentional ?
Cable will be replaced once a spare is available.
Setup did not restart the WR decoder when this problem occurred beforehand - Reset/Setup tried.
WR rate was chosen by Vic I believe, I am unsure of reasoning myself. |
|
90
|
Thu Nov 7 10:22:26 2019 |
Nic, Patrick | Reply: WR Timestamps |
> > > All 12 FEEs have valid WR Timestamps
> > > Had to powercycle aida09 once as before raw readout was displaying upper 12 bits of WR timestamp as 0. Unsure of other method.
> > >
> > > HDMI cables in aida09 checked and good.
> >
> > The problem would be the cable , one end or the other.
> > I think ( if I recall ) a setup would restart the WR decoder.
> >
> > I notice you have set the WR info word rate to be quite high , 6123/sec typ, is this intentional ?
>
> Cable will be replaced once a spare is available.
>
> Setup did not restart the WR decoder when this problem occurred beforehand - Reset/Setup tried.
>
> WR rate was chosen by Vic I believe, I am unsure of reasoning myself.
An update/clarification:
Although the upper bits are zero I believe actually it is a total failure to synchronise to WR:
aida09
WR Time Item 0x80500000 0x0fbd8000; Time (48:63)=0x0; Time (28:47)=0x249; Time (0:27)=0x0fbd8000
WR Time Item 0x80400249 0x0fbd8000; Time (28:47)=0x249; Time (0:27)=0x0fbd8000
WR Time Item 0x80500000 0x0fbdc000; Time (48:63)=0x0; Time (28:47)=0x249; Time (0:27)=0x0fbdc000
WR Time Item 0x80400249 0x0fbdc000; Time (28:47)=0x249; Time (0:27)=0x0fbdc000
WR Time Item 0x80500000 0x0fbe0000; Time (48:63)=0x0; Time (28:47)=0x249; Time (0:27)=0x0fbe0000
WR Time Item 0x80400249 0x0fbe0000; Time (28:47)=0x249; Time (0:27)=0x0fbe0000
aida10
WR Time Item 0x8050022e 0x0bde8000; Time (48:63)=0x22e; Time (28:47)=0xe29d5; Time (0:27)=0x0bde8000
WR Time Item 0x804e29d5 0x0bde8000; Time (28:47)=0xe29d5; Time (0:27)=0x0bde8000
WR Time Item 0x8050022e 0x0bdec000; Time (48:63)=0x22e; Time (28:47)=0xe29d5; Time (0:27)=0x0bdec000
WR Time Item 0x804e29d5 0x0bdec000; Time (28:47)=0xe29d5; Time (0:27)=0x0bdec000
WR Time Item 0x8050022e 0x0bdf0000; Time (48:63)=0x22e; Time (28:47)=0xe29d5; Time (0:27)=0x0bdf0000
WR Time Item 0x804e29d5 0x0bdf0000; Time (28:47)=0xe29d5; Time (0:27)=0x0bdf0000 |
|
669
|
Wed Aug 14 12:40:11 2024 |
JB | Repaired DSSSD delivery 14.09.2024 |
Three BB18-1000 triples AIDAs collected on 14.09.2024
Find attached visual of the wafer and bond wire + factory bias tests accompanying the DSSSDs. elog:669/1 elog:669/2 elog:669/3
Visual inspection carried out showed that bond wires have been fixed + fingerprint on one DSSSD removed and wires repaired. elog:669/4 elog:669/5 elog:669/6 elog:669/7 elog:669/8 elog:669/9 elog:669/10 elog:669/11
DSSSD 1 (defect bias issue 80V): 3208-10 / 3208-18 / 3208-20
DSSSD 2 (3208-6 dysfunctional): 3208-6 / 3208-9 / 3208-16
DSSSD 3 (defect fingerprint): 3131-5 / 3131-10 / 3131-12
|
| Attachment 1: doc00418120240814132739.pdf
|
|
| Attachment 2: doc00418020240814132419.pdf
|
|
| Attachment 3: doc00417920240814132325.pdf
|
|
| Attachment 4: 20240814_132617.jpg
|
|
| Attachment 5: 20240814_133316.jpg
|
|
| Attachment 6: 20240814_133306.jpg
|
|
| Attachment 7: 20240814_133225.jpg
|
|
| Attachment 8: 20240814_133321.jpg
|
|
| Attachment 9: 20240814_133328.jpg
|
|
| Attachment 10: 20240814_133300.jpg
|
|
| Attachment 11: 20240814_133313.jpg
|
|
|
154
|
Mon Mar 16 01:07:29 2020 |
TA, AM, ES | Regular entry |
02:14 all system wide checks okay
FEE temperatures okay
leakage currents okay and recorded to spreadsheet
good event stats okay
merger running at 3M items/sec
tape service running at 26MB/sec
All attached to this entry with screenshots to 1-7
04:05 all system wide checks okay
FEE temperatures okay
leakage currents okay and recorded to spreadsheet
good event stats okay
merger running at 3M items/sec
tape service running at 26MB/sec
All attached tp this entry with screenshots 7-14 |
| Attachment 1: Screenshot-2.png
|
|
| Attachment 2: Screenshot-4.png
|
|
| Attachment 3: Screenshot-3.png
|
|
| Attachment 4: Screenshot-5.png
|
|
| Attachment 5: Screenshot-7.png
|
|
| Attachment 6: Screenshot.png
|
|
| Attachment 7: 16_1.png
|
|
| Attachment 8: 16_2.png
|
|
| Attachment 9: 16_3.png
|
|
| Attachment 10: 16_4.png
|
|
| Attachment 11: 16_5.png
|
|
| Attachment 12: 16_6.png
|
|
| Attachment 13: 16_7.png
|
|
|
155
|
Mon Mar 16 05:08:12 2020 |
TA, AM, ES | Regular entry |
02:14 all system wide checks okay
FEE temperatures okay
leakage currents okay and recorded to spreadsheet
good event stats okay
merger running at around 3M items/sec
tape service running at 26MB/sec
All attached to this entry with screenshots to 1-7 |
| Attachment 1: 16__1.png
|
|
| Attachment 2: 16__2.png
|
|
| Attachment 3: 16__3.png
|
|
| Attachment 4: 16__4.png
|
|
| Attachment 5: 16__5.png
|
|
| Attachment 6: 16__6.png
|
|
|
434
|
Thu May 12 21:43:49 2022 |
BA, MA | Rates |
Statistic check (screenshot attached).
Temperatures OK (screenshot attached).
Bias and leakage currents OK (same screenshot as temps).
|
| Attachment 1: Stati2022-05-12_22-47-26.png
|
|
| Attachment 2: Temp2022-05-12_22-48-41.png
|
|
| Attachment 3: LeakageCurrent2022-05-12_22-45-44.png
|
|
|
13
|
Sat Dec 8 15:22:52 2018 |
TD | Raspberry Pi startup |
nnrpi1 - FEE64 system consoles
nnrpi2 - USB-controlled ac mains relay, CAEN N1419ET
username: pi
password: *******
To startup TclHttpd server for web access via port 8015 execute
/MIDAS/TclHttpd/Linux-arm/TclHttpd-server
Update - 9 March 2020 command line should be
/MIDAS/TclHttpd/linux-arm/TclHttpd-server |
|
24
|
Fri Jan 25 12:26:17 2019 |
NH | Raspberry Pi Startup & Information |
Two raspberry pis:
nnrpi1 - FEE64 system consoles
nnrpi2 - AC Mains Relay & CAEN HV
Startup:
1. Plug in micro-USB on pis
2. Connect via ssh: ssh pi@nnrpi1 or ssh pi@nnrpi2
3. Start MIDAS:
cd /MIDAS/TclHttpd/Linux-arm
./TclHttpd-server
4. Connect from aida-gsi web browser
http://nnrpi2:8015 - For AC Relay Control
http://nnrpi1:8015 - For Pi Monitoring (Get list of USB terminals, Connect)
-> Parse USB log for details to check if all FEEs have finished booting completely or not
5. For CAEN HV connect via ssh/X (ssh -X pi@nnrpi2) and run
putty &
Opens putty window to connect to the CAEN HV module (Serial /dev/ttyACM0) |
|
71
|
Thu Oct 31 09:36:37 2019 |
TD | RIKEN LayOut directory |
|
| Attachment 1: LayOut.tar.gz
|
|
46
|
Thu Apr 4 14:07:45 2019 |
NH | Pulser Configuration |
Pulser settings during April run:
Rate 2Hz
Delay 250 NS
Amplitude 1 V
Fall 1 ms
Polarity Pos
Pulse Top Tail
Attenuation 1X
PB5 Pulse On
Clamp Off
|
|
381
|
Mon Oct 18 13:01:04 2021 |
OH | Proxy config |
Proxy for firefox and anydesk |
| Attachment 1: proxy.png
|
|
| Attachment 2: proxy2.png
|
|
|
513
|
Thu Sep 8 12:37:18 2022 |
NH | Proxy Port Changed |
The proxy in Firefox, Yum and AnyDesk has been changed as the old wasn't working
proxy.gsi.de port 3128 is now in use |
|
286
|
Wed Apr 28 17:39:35 2021 |
TD | Preparations for setup of aida13-aida16 |
Updated /etc/dhcpd.conf
cd /etc
cp dhcpd.conf dhcpd.conf.BAK-280421
Add MAC addresses https://elog.ph.ed.ac.uk/DESPEC/285
aida13 xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:42: d:15
aida14 xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:42: d: b
aida15 xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:ee:10
aida16 xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:f6:ed
New version of dhcpd.conf (and backup) - attachments 1 & 2
Cannot find dhcpd (and therefore re-read config and restart) in System - Administration -> Services
- has the dhcpd service been re-named or amalgamated with another service?
Updated /MIDAS/config/TclHttpd/aidas-gsi@8015/startup.tcl
New version of startup.tcl (and backup) - attachments 3 & 4
Created rfs filesytems for aida13-aida24
[root@aidas-gsi]# cd /home/Embedded/XilinxLinux/ppc_4xx/rfs
[root@aidas-gsi rfs]# cd aida01
[root@aidas-gsi rfs]# tar cvf ../rfs.tar .
Create directories aida13-aida24, uid=10101, gid=npg, mode 777
[root@aidas-gsi rfs]# cd aida13; tar xvf ../rfs.tar .
:
:
etc
[root@aidas-gsi rfs]# ls -l
total 1491880
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida01
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida02
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida03
drwxrwxrwx. 19 10101 npg 4096 Apr 24 03:51 aida04
drwxrwxrwx. 19 10101 npg 4096 Apr 24 03:51 aida05
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida06
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida07
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida08
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:35 aida09
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida10
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:34 aida11
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida12
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida13
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida14
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida15
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida16
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida17
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida18
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida19
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida20
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida21
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida22
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida23
drwxrwxrwx. 19 10101 npg 4096 Apr 28 16:32 aida24
-rw-r--r--. 1 root root 1527582720 Apr 28 18:26 rfs.tar
Once dhcpd has been restarted it should be possible to power cycle all FEE64s, start system
and update firmware of newly installed FEE64s. |
| Attachment 1: dhcpd.conf
|
#
# DHCP Server Configuration file.
# see /usr/share/doc/dhcp*/dhcpd.conf.sample
#
# Date of last update Jan 12 2015
#
authoritative;
ddns-update-style none; ddns-updates off;
# 2 days
#default-lease-time 172800;
# 4 days
default-lease-time 345600;
# 8 days
max-lease-time 691200;
option domain-search code 119 = string;
option domain-name "dl.ac.uk";
option domain-name-servers 193.62.115.16, 148.79.80.78;
option netbios-name-servers 148.79.160.89;
option netbios-node-type 8;
option nis-domain "nuclear.physics";
option nis-servers 193.62.115.77;
subnet 192.168.11.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.11.255;
pool {
range 192.168.11.118 192.168.11.199;
}
}
group {
use-host-decl-names true;
default-lease-time 3600;
max-lease-time 14400;
server-name "192.168.11.99";
next-server 192.168.11.99;
host nnrpi1 {
hardware ethernet b8:27:eb:bb:46:7b;
fixed-address 192.168.11.251;
}
host nnrpi2 {
hardware ethernet b8:27:eb:40:53:e8;
fixed-address 192.168.11.117;
}
host aida01 {
hardware ethernet d8:80:39:41:ba:8a;
fixed-address 192.168.11.1;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida01";
}
host aida02 {
hardware ethernet d8:80:39:41:ba:22;
fixed-address 192.168.11.2;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida02";
}
host aida03 {
hardware ethernet d8:80:39:41:d8:21;
fixed-address 192.168.11.3;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida03";
}
host aida04 {
hardware ethernet d8:80:39:41:f6:b7;
fixed-address 192.168.11.4;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida04";
}
host aida05 {
hardware ethernet d8:80:39:41:d7:cc;
fixed-address 192.168.11.5;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida05";
}
host aida06 {
hardware ethernet d8:80:39:41:ee:72;
fixed-address 192.168.11.6;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida06";
}
host aida07 {
hardware ethernet d8:80:39:41:b4:0c;
fixed-address 192.168.11.7;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida07";
}
host aida08 {
hardware ethernet d8:80:39:41:ba:2b;
fixed-address 192.168.11.8;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida08";
}
host aida09 {
hardware ethernet d8:80:39:41:f6:ee;
fixed-address 192.168.11.9;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida09";
}
host aida10 {
hardware ethernet d8:80:39:41:ba:89;
fixed-address 192.168.11.10;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida10";
}
host aida11 {
hardware ethernet d8:80:39:41:f6:5a;
fixed-address 192.168.11.11;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida11";
}
host aida12 {
hardware ethernet d8:80:39:41:cf:ac;
fixed-address 192.168.11.12;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida12";
}
host aida13 {
hardware ethernet d8:80:39:42:d:15;
fixed-address 192.168.11.13;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida13";
}
host aida14 {
hardware ethernet d8:80:39:42:d:b;
fixed-address 192.168.11.14;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida14";
}
host aida15 {
hardware ethernet d8:80:39:41:ee:10;
fixed-address 192.168.11.15
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida15";
}
host aida16 {
hardware ethernet d8:80:39:41:f6:ed;
fixed-address 192.168.11.16;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida16";
}
}
subnet 192.168.12.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.12.255;
pool {
range 192.168.12.100 192.168.12.199;
}
}
group {
use-host-decl-names true;
default-lease-time 3600;
max-lease-time 14400;
server-name "192.168.12.99";
next-server 192.168.12.99;
host aida21 {
hardware ethernet d8:80:39:41:d8:2a;
fixed-address 192.168.12.1;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida21";
}
host aida22 {
hardware ethernet 00:04:a3:2a:d0:26;
fixed-address 192.168.12.2;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida22";
}
host aida23 {
hardware ethernet 00:04:a3:2b:09:ce;
fixed-address 192.168.12.3;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida23";
}
host aida24 {
hardware ethernet 00:04:a3:2b:09:e8;
fixed-address 192.168.12.4;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida24";
}
}
|
| Attachment 2: dhcpd.conf.BAK-280421
|
#
# DHCP Server Configuration file.
# see /usr/share/doc/dhcp*/dhcpd.conf.sample
#
# Date of last update Jan 12 2015
#
authoritative;
ddns-update-style none; ddns-updates off;
# 2 days
#default-lease-time 172800;
# 4 days
default-lease-time 345600;
# 8 days
max-lease-time 691200;
option domain-search code 119 = string;
option domain-name "dl.ac.uk";
option domain-name-servers 193.62.115.16, 148.79.80.78;
option netbios-name-servers 148.79.160.89;
option netbios-node-type 8;
option nis-domain "nuclear.physics";
option nis-servers 193.62.115.77;
subnet 192.168.11.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.11.255;
pool {
range 192.168.11.118 192.168.11.199;
}
}
group {
use-host-decl-names true;
default-lease-time 3600;
max-lease-time 14400;
server-name "192.168.11.99";
next-server 192.168.11.99;
host nnrpi1 {
hardware ethernet b8:27:eb:bb:46:7b;
fixed-address 192.168.11.251;
}
host nnrpi2 {
hardware ethernet b8:27:eb:40:53:e8;
fixed-address 192.168.11.117;
}
host aida01 {
hardware ethernet d8:80:39:41:ba:8a;
fixed-address 192.168.11.1;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida01";
}
host aida02 {
hardware ethernet d8:80:39:41:ba:22;
fixed-address 192.168.11.2;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida02";
}
host aida03 {
hardware ethernet d8:80:39:41:d8:21;
fixed-address 192.168.11.3;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida03";
}
host aida04 {
hardware ethernet d8:80:39:41:f6:b7;
fixed-address 192.168.11.4;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida04";
}
host aida05 {
hardware ethernet d8:80:39:41:d7:cc;
fixed-address 192.168.11.5;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida05";
}
host aida06 {
hardware ethernet d8:80:39:41:ee:72;
fixed-address 192.168.11.6;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida06";
}
host aida07 {
hardware ethernet d8:80:39:41:b4:0c;
fixed-address 192.168.11.7;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida07";
}
host aida08 {
hardware ethernet d8:80:39:41:ba:2b;
fixed-address 192.168.11.8;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida08";
}
host aida09 {
hardware ethernet d8:80:39:41:f6:ee;
fixed-address 192.168.11.9;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida09";
}
host aida10 {
hardware ethernet d8:80:39:41:ba:89;
fixed-address 192.168.11.10;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida10";
}
host aida11 {
hardware ethernet d8:80:39:41:f6:5a;
fixed-address 192.168.11.11;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida11";
}
host aida12 {
hardware ethernet d8:80:39:41:cf:ac;
fixed-address 192.168.11.12;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida12";
}
}
subnet 192.168.12.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.12.255;
pool {
range 192.168.12.100 192.168.12.199;
}
}
group {
use-host-decl-names true;
default-lease-time 3600;
max-lease-time 14400;
server-name "192.168.12.99";
next-server 192.168.12.99;
host aida21 {
hardware ethernet d8:80:39:41:d8:2a;
fixed-address 192.168.12.1;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida21";
}
host aida22 {
hardware ethernet 00:04:a3:2a:d0:26;
fixed-address 192.168.12.2;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida22";
}
host aida23 {
hardware ethernet 00:04:a3:2b:09:ce;
fixed-address 192.168.12.3;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida23";
}
host aida24 {
hardware ethernet 00:04:a3:2b:09:e8;
fixed-address 192.168.12.4;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida24";
}
}
|
| Attachment 3: startup.tcl
|
Setting BGColor "BlanchedAlmond"
Setting TextColor "red"
Setting ProjectName AIDA
Setting ProjectImage AIDA.gif
Setting ProjectURL "http://npg.dl.ac.uk/NPG/Projects/Fair.html"
Setting Option1Name STFC
Setting Option1URL "stfc.ac.uk"
Setting Option1Image stfc.jpg
# global MessageLoggerServerHost
# set MessageLoggerServerHost nndhcp077.dl.ac.uk
# package require MessageLoggerClient
# Setting Option3Name "Elog Server"
# Setting Option3URL "http://nndhcp077.dl.ac.uk:8080/DataAcq/"
# Install required services
if {![namespace exists ::AIDA]} {namespace eval ::AIDA {puts "created namespace ::AIDA"}}
# set ::AIDA::TestMode 1
global SpectrumServerHost
set SpectrumServerHost aidas
package require XAIDAAccessClient ;# for Client end - ie AIDA server workstation sets MIDAS_XAIDAAccessClient_Exists (SOAP)
package require XAD9252AccessClient ;# for Client end - ie AIDA server workstation sets MIDAS_XAD9252AccessClient_Exists (SOAP)
namespace eval DataAcquisition {
variable PROJECT AIDA
variable ACQSERVERS
set ACQSERVERS [list aida01 aida02 aida03 aida04 aida05 aida06 aida07 aida08 aida09 aida10 aida11 aida12 aida13 aida14 aida15 aida16]
# set ACQSERVERS [list aida01 aida02 aida03 aida04]
# set ACQSERVERS [list aida01 aida02 aida03 aida04 aida05 aida06 aida07 aida08 aida09 aida10 aida11 aida12]
# set ACQSERVERS [list aida01 aida02 aida03 aida04]
variable ACQSERVER [first $ACQSERVERS]
variable DataTransferStreams; set DataTransferStreams 2
# set ::DataAcquisition::EnableMerger 1
# set ::DataAcquisition::EnableTape 1
variable RDOGo 0
}
namespace eval AIDA {
variable ModuleMenu; set ModuleMenu $::DataAcquisition::ACQSERVERS
variable TSMaster; set TSMaster aida01
variable FEE64 [first $ModuleMenu]
variable ConfigBase; set ConfigBase [file join $env(MIDASBASE) config TclHttpd]
}
Setting DataBaseRoot "/MIDAS/DB"
package require DataBaseAccessServer
package require NetVarsServer 1.1
package require SigTaskServer
# package require MemSasServer
# Install services for Run Control
namespace eval $::DataAcquisition::PROJECT {
variable DBRootName [file join EXPERIMENTS AIDA]
variable DBNodeBase 2012
}
package require AIDARunControl
# package require TapeServer
# package require MergerControl
# package require MERGERunControl
Setting Option7Name "Project Home Page"
Setting Option7URL "http://npg.dl.ac.uk/NPG/Projects/Fair.html"
Setting Option8Name "Server Software Home Page"
Setting Option8URL "http://npg.dl.ac.uk/MIDAS/download/WebServices.html"
|
| Attachment 4: startup.tcl.BAK-280421
|
Setting BGColor "BlanchedAlmond"
Setting TextColor "red"
Setting ProjectName AIDA
Setting ProjectImage AIDA.gif
Setting ProjectURL "http://npg.dl.ac.uk/NPG/Projects/Fair.html"
Setting Option1Name STFC
Setting Option1URL "stfc.ac.uk"
Setting Option1Image stfc.jpg
# global MessageLoggerServerHost
# set MessageLoggerServerHost nndhcp077.dl.ac.uk
# package require MessageLoggerClient
# Setting Option3Name "Elog Server"
# Setting Option3URL "http://nndhcp077.dl.ac.uk:8080/DataAcq/"
# Install required services
if {![namespace exists ::AIDA]} {namespace eval ::AIDA {puts "created namespace ::AIDA"}}
# set ::AIDA::TestMode 1
global SpectrumServerHost
set SpectrumServerHost aidas
package require XAIDAAccessClient ;# for Client end - ie AIDA server workstation sets MIDAS_XAIDAAccessClient_Exists (SOAP)
package require XAD9252AccessClient ;# for Client end - ie AIDA server workstation sets MIDAS_XAD9252AccessClient_Exists (SOAP)
namespace eval DataAcquisition {
variable PROJECT AIDA
variable ACQSERVERS
# set ACQSERVERS [list aida01 aida02 aida03 aida04 aida05 aida06 aida07 aida08 aida09 aida10 aida11 aida12 aida13 aida14 aida15 aida16]
# set ACQSERVERS [list aida01 aida02 aida03 aida04]
set ACQSERVERS [list aida01 aida02 aida03 aida04 aida05 aida06 aida07 aida08 aida09 aida10 aida11 aida12]
# set ACQSERVERS [list aida01 aida02 aida03 aida04]
variable ACQSERVER [first $ACQSERVERS]
variable DataTransferStreams; set DataTransferStreams 2
# set ::DataAcquisition::EnableMerger 1
# set ::DataAcquisition::EnableTape 1
variable RDOGo 0
}
namespace eval AIDA {
variable ModuleMenu; set ModuleMenu $::DataAcquisition::ACQSERVERS
variable TSMaster; set TSMaster aida01
variable FEE64 [first $ModuleMenu]
variable ConfigBase; set ConfigBase [file join $env(MIDASBASE) config TclHttpd]
}
Setting DataBaseRoot "/MIDAS/DB"
package require DataBaseAccessServer
package require NetVarsServer 1.1
package require SigTaskServer
# package require MemSasServer
# Install services for Run Control
namespace eval $::DataAcquisition::PROJECT {
variable DBRootName [file join EXPERIMENTS AIDA]
variable DBNodeBase 2012
}
package require AIDARunControl
# package require TapeServer
# package require MergerControl
# package require MERGERunControl
Setting Option7Name "Project Home Page"
Setting Option7URL "http://npg.dl.ac.uk/NPG/Projects/Fair.html"
Setting Option8Name "Server Software Home Page"
Setting Option8URL "http://npg.dl.ac.uk/MIDAS/download/WebServices.html"
|
|
540
|
Mon Mar 18 18:04:43 2024 |
NH | Preparation for pre-s100 dry run (and test beam???) |
In preparation for the dry run the following *temporary* changes to the FEE numbering have been prepared
These should be reverted after the dry run to ensure cable->fee agreement again
AIDA09 => AIDA06
AIDA11 => AIDA07
AIDA12 => AIDA08
This will allow the merger to run with 8 FEEs for 1 DSSD
dhcpd.conf updated
The 2023Oct19-13.46.30 should work with this numbering (check tomorrow)
As should layout GSI_triple_test_renumber
AFTER dry run:
Revert DHCP and prepare for full 16 FEEs
Make new ASIC settings key for 16 FEEs and prepare the aidaXX folders
Prepare a new Layout.mlf set |
|
159
|
Tue Jul 7 08:04:57 2020 |
NH | Power failure in Messhuette |
Last week there was a power failure in Messhuette (FRS control room) - AIDA-3 and MBS were affected.
AIDA itself and S4 equipment is on UPS and was not shut down.
AIDA-3 has been restarted and MIDAS restarted. All seems OK
S4 conditions: 24.2 C / 33.5% RH / Td = 7.1 C |
|
519
|
Mon Aug 28 12:47:56 2023 |
NH | Power Failure 24.08.2023 |
There was a power failure in the morning of 24.08.2023 in the Rhein-Main area affecting GSI
The Aida workstation (aida-3) has been restarted, it is unknown if the Pis in S4 rebooted as well (there is a UPS)
29.8.23 TD Both RPi systems rebooted four days ago. |
|
524
|
Wed Jan 31 15:27:07 2024 |
TD | Photos of water flow & dew point sensor interlock box |
Attachment 1 - 4 socket input connectors ( from sensor to interlock box )
Attachment 2 & 2 - 24V dc relays and internal wiring
Attachment 4 - 3 socket input connector ( from interlock box to USB-controlled ac mains relay ) |
| Attachment 1: 20240131_160205.jpg
|
|
| Attachment 2: 20240131_145249.jpg
|
|
| Attachment 3: 20240131_145340.jpg
|
|
| Attachment 4: 20240131_160341.jpg
|
|
|
147
|
Thu Mar 12 23:44:48 2020 |
DK | PID Plots |
Labelled PID plots. Note that the A/Q calibration is shifted by +0.02 units, and Z calibration is offset by about +5.
There was an error in the printouts for Cd isotopes, but the below attachments are corrected.
The Z-depth (color, not nuclear charge) is log scale. |
| Attachment 1: pid.png
|
|
| Attachment 2: pid.png
|
|
| Attachment 3: pid.pdf
|
|
|
607
|
Thu Apr 25 22:45:30 2024 |
Tom, Muneerah, Norah | Over night shift AIDA 26 Fri |
01:02
Aida04 was zero not reading had to call Tom to fix it.
02:00 checked all good and attached.
Its been running good after that till 7:30 again the same problem happened and Tom fixed it.
|
| Attachment 1: Screenshot_from_2024-04-25_23-42-15.png
|
|
| Attachment 2: Screenshot_from_2024-04-26_00-05-47.png
|
|
| Attachment 3: Screenshot_from_2024-04-26_00-05-15.png
|
|
| Attachment 4: Screenshot_from_2024-04-26_00-04-22.png
|
|
| Attachment 5: Screenshot_from_2024-04-26_02-00-17.png
|
|
| Attachment 6: Screenshot_from_2024-04-26_01-58-39.png
|
|
| Attachment 7: Screenshot_from_2024-04-26_01-58-39.png
|
|
| Attachment 8: Screenshot_from_2024-04-26_01-57-38.png
|
|
| Attachment 9: Screenshot_from_2024-04-26_01-57-01.png
|
|
|
515
|
Thu Oct 6 16:51:49 2022 |
NH | Oscilloscope analysis |
Investigating AIDA noise with a TA041 differential probe and oscilloscope
AC Mains (DESPEC platform AC, L-N)
Probe attentuation = 1:100
Fig 1: Main AC waveform [X: 5ms/div, Y: 100 V/div]
Fig 2: Zoomed in at peak (20 V FSR, any less and the waveform clipped) [X: 10us/div, Y: 20V/div]
Fig 3: Longer time base and FFT of 0-5 MHz. No significant frequency harmonics noticed [X: 5ms/div, Y:20 V, FFT X: 500 kHz/div, Y: 10 dBm/div]
No significant noise or distortion present, fully within any AC specification.
Note that at the moment there is almost no load on AC
Equipment on on DESPEC rack: AIDA NIM, AIDA Raspberry Pis, bPlas PC (+ WR) + 2x DESPEC NIM crates
No autofill, VME crate or detectors
All big machines at GSI (SIS, FRS) off (suspect pumps are on)
Ion catcher not on (I think under repair)
-
FEE PSU studies
Probe connected to 5V exposed power pin on FEE64 (+v) and to grounding crimp on FEE64 (-v)
No adapter board connected
Attentuation = 1:10
Fig 4: FFT when FEEs are *off* - essentially probe+scope noise [X: 5ms/div, Y: 100 mV/div, FFT: X: 500 kHz/div, Y: 10 dBm/div]
Fig 5: FFT when FEEs are *on* - notice 1.4 MHz peak in FFT, also seen on ADC waveform readout before (fig 6) [X: 5ms/div, Y: 100 mV/div, FFT: X: 500 kHz/div, Y: 10 dBm/div]
Fig 7: 500 ns/div 5V output on FEE, single FEE on the PSU [X: 500 ns/div, Y: 100 mV/div]
Note average max voltage is 5.31 V (power on) and ~ 70 mV "peak to peak" -might be from probe/scope?
Also see voltage changes with FEE power draw:
Power on : 5.45 V (different scale to above)
SETUP ran : 5.51 V
FADCs off : 5.86 V
ACQ Go: : Unchanged; ASIC threshold 0xa: Unchanged
Also check situation on a fully loaded PSU (8 fees connected and powered on)
Power on: 5.29 V (fig 8)
SETUP ran: 5.36 V (fig 9)
FADCs off: 5.64 V (fig 10)
All X: 500 ns/div, Y: 100 mV/div
Both cases observe voltage rises as current draw drops (as expected for voltage drop along a cable)
Noise on 'scope seems to get slightly worse with reduced current (and higher voltage)
No sign of strong 100 kHz noise as seen in ADC traces beforehand
Todo:
- Check -6V and 7V rails
- Check 5V and noise when front-end card is added and pulser/HV connected
- Check between two FEE64 grounds
- Check direct out of PSU vs ground to see if 1.4 MHz appears on PSU side or FEE64 side
-
11.10.22 Updates
Attachement 11 - 5V PSU on upper PSU with no FEEs attached whatsoever. No 1.4 MHz (on FFT) but clear low frequency beats from switching - presumably low/no load behaviour
Attachement 12 - 5V PSU on aida12 with 8 FEEs on PSU. Longer time base to allow lower frequencies in FFT. 1.4 MHz switching spikes visible but nothing around 100 kHz region
Attachments 13-16: 5V PSU on aida12 at 20 mV/div vertical and 1, 0.5, 2, 5 us/div horizontal respectively
12.10.22 Updates
Attachment 17: -6V PSU on aida12 with 8 FEEs on PSU. 2 us/div timebase. 20 mV/div amplitude
Attachment 18: 10 ms timebase and FFT
Average voltage: -6.21 V
Attachment 19: 7V PSU on aida12 with 8 FEEs on PSU. 2 us/div timebase. 20 mV/div amplitude
Attachment 18: 10 ms timebase and FFT
Average voltage: 7.46V
Measurement between AIDA12 ground and Reference ground/copper bar
+ve (red probe) attached to copper bar at ground point (not strong connection at present)
-ve (black probe) attached to ground crimp on aida12 (connected to cooling plate)
aida12 no adapter board connected: connections are PSU, Ethernet, HDMI and TTY only
Attachment 21: 5 us/div 100 mv/div waveform, big oscillations present. Not seen before FEEs turned on (8 FEES, 1-7+12)
Attachment 22: 10 ms/div for FFT, sharp peak at exactly 100 kHz observed...
Attachment 23: Between 5V PSU (+ve) and 19" rack (-ve) with no FEEs connected to PSU
See strong 100 kHz oscillations too, note that voltage isn't 5V as PSU is floating w.r.t. ground
Looks to be common mode noise (on both 5V and Return of PSU)
Attachment 24: Same as 21 but using thick crocodile clips on probe to ground and aida12. Noise is attenuated but still present |
| Attachment 1: SCRN0086.PNG
|
|
| Attachment 2: SCRN0090.jpg
|
|
| Attachment 3: SCRN0113.jpg
|
|
| Attachment 4: SCRN0107.jpg
|
|
| Attachment 5: SCRN0108.jpg
|
|
| Attachment 6: Image_Pasted_at_2022-10-6_15-51.jpg
|
|
| Attachment 7: SCRN0098.jpg
|
|
| Attachment 8: SCRN0109.jpg
|
|
| Attachment 9: SCRN0110.jpg
|
|
| Attachment 10: SCRN0111.jpg
|
|
| Attachment 11: SCRN0115.PNG
|
|
| Attachment 12: SCRN0121.PNG
|
|
| Attachment 13: SCRN0124.PNG
|
|
| Attachment 14: SCRN0125.PNG
|
|
| Attachment 15: SCRN0126.PNG
|
|
| Attachment 16: SCRN0127.PNG
|
|
| Attachment 17: SCRN0132.PNG
|
|
| Attachment 18: SCRN0129.PNG
|
|
| Attachment 19: SCRN0139.PNG
|
|
| Attachment 20: SCRN0136.PNG
|
|
| Attachment 21: SCRN0141.PNG
|
|
| Attachment 22: SCRN0143.PNG
|
|
| Attachment 23: SCRN0149.PNG
|
|
| Attachment 24: SCRN0153.PNG
|
|