| ID |
Date |
Author |
Subject |
Text |
 |
|
125
|
Sun Jun 16 00:52:27 2019 |
Ela, Sonja, Victor | root file 6:30-8:30 | |
| |
128
|
Sun Jun 16 03:42:17 2019 |
Ela, Sonja, Victor | root file 8:30-10:30 | |
| |
129
|
Sun Jun 16 04:44:05 2019 |
Ela, Sonja, Victor | root file 10:30-12:30 | The beam stopped a couple of times due to
problems before RRC |
| |
130
|
Sun Jun 16 06:55:31 2019 |
Ela, Sonja, Victor | root file 12:30-14:30 | |
| |
99
|
Fri Jun 7 01:55:24 2019 |
CA, JA , AT | merger test | Setup: On 17th-May (11:18 - 11:38), AIDA was
inside DTAS. Measurement of 60Co source.
|
| |
98
|
Thu Jun 6 09:36:52 2019 |
Alvaro, Jorge, Ale | new config file | New config file: 20190606_Conf.xlsx
Changed with respect to the earlier file |
| |
144
|
Wed Jun 19 05:10:15 2019 |
Alvaro | Aida plastic - gain change | TAC AIDAPL - CryA changed
After increasing the gain, x2 peaks in TAC |
| |
10
|
Wed May 15 11:53:17 2019 |
Algora, Nacher, Kiss | Background | Start: 20:05
Stop: 09:44
Background rate 2.9 kHz (Dynodes), |
| |
9
|
Wed May 15 11:50:04 2019 |
Algora, Nacher | 137Cs listmode, and rootfile | 137Cs source in the center of the DTAS,
with the IFIC holder
list mode files: Cs137_Source_20190515_000.dlt |
| |
4
|
Wed May 15 06:40:16 2019 |
Algora, Kiss, Nacher | DTAS aligned and calibrated | Signal cables (long cables, from preamp
to digitizer) of channels 13 and 16 were
changed. For the moment they have not been |
| |
11
|
Thu May 16 02:02:24 2019 |
Algora Kiss Nacher | detector 3 moved over night | After the long background measurement we have
measured 60Co to check alignment.
Everything looks fine except for detector |
| |
14
|
Thu May 16 06:59:51 2019 |
Algora Kiss Nacher | Det 3 | Det 3 moved, both Anode and Dynode. So
we have changed the HV cable to test if there
are no more jumps. We used cable 9 and it |
| |
108
|
Mon Jun 10 04:14:39 2019 |
Ale, Jose | Background measurement overnight | Start:~14:00 (June 9)
Stop:10:30
|
| |
109
|
Mon Jun 10 04:18:24 2019 |
Ale, Jose | New Configuration File | File: 20190610_1145_Conf_DTAS.xlsx
Several changes and corrections
|
| |
110
|
Mon Jun 10 08:07:17 2019 |
Ale, Jose | Test of pulser count rates | File: 20190610_1602_background_AIDA_in.root
SyncPulse: 61777
|
| |
113
|
Mon Jun 10 10:44:36 2019 |
Ale, Jose | New Conf file with new calibration | File: 20190610_1835_Conf_DTAS.xlsx |
| |
114
|
Mon Jun 10 12:31:52 2019 |
Ale, Jose | New calibration | New calibration with more statistics
File: 20190610_2030_60Co_137Cs_AIDA_in.root
|
| |
115
|
Mon Jun 10 12:48:01 2019 |
Ale, Jose | New Config file | Conf file with new calibration:
20190610_2035_Conf_DTAS.xlsx
|
6x | |
119
|
Fri Jun 14 16:22:25 2019 |
AT, OH, JA, CG, TD | AIDA Sync | Problem with the sync checker appeared AIDA
was not its notmal 14us out from DTAS.
|
| |
118
|
Wed Jun 12 02:04:07 2019 |
AA, EN, PM, AT | background during in-beam exp. | In-beam experiment going on. Only 12h of beam
in the last 21h.
|
|
|