ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA, Page 24 of 46

Full | Summary | Threaded | Hide attachments

920 Entries

Goto page Previous 1, 2, 3 ... 23, 24, 25 ... 44, 45, 46 Next

ID	Date	Author	Subject
919	Wed Nov 15 10:37:00 2023	TD	Wednesday 15 November
11.36 Water flow, pressure & temperature ( 19 deg C ) OK Power ON Detector configuration - installed yesterday pm Extant ( May 2022 campaign ) snout 1x MSL type BB18(DS)-1000 24cm x 8cm 'triple' DSSSD 1x ( downstream ) bPlast 2x additional Al foil sheets over end cap to ensure light tight ( zero dark current ) for bPlast Dark current c 0.4uA measured for extant 2x Al foil sheets only FEE64 configuration - aida01 - aida08 aida02 & aida04 n+n Ohmic strips, other FEE64s p+n junction strips NH re-named FEE64s using dhcpd.conf - no changes to AIDA PSU cabling to FEE64s All system wide checks OK DSSSD bias -150V leakage current -5.140uA - attachment 1 FEE64 temps OK - attachment 2 ASIC settings 2021Apr29-13-16-00 Manually change ASIC settings aida06 & aida08 from - to + input BNC PB-5 pulser to aida08 settings? Slow comparator 0x64 all FEE64s ADC data item stats - attachment 3 Increased rates and noise cf yesterday's test https://elog.ph.ed.ac.uk/AIDA/916 See attachments 4-9 Per FEE64 Rate spectra Per FEE64 1.8.L spectra Per FEE64 1.8.W spectra - 20us FSR 12.10 Disconnected power cables(?) from 3x bPlast cards around AIDA snout 1x card hanging to side of snout - aida04 side, 2x resting on top of AIDA snout ( inserted 2 sheets folded A4 paper between AIDA snout and PCBs ) Per FEE64 1.8.W spectra - 20us FSR - attachments 10 & 11 Per FEE64 Rate spectra - attachment 12 Significant improvement observed Slow comparators 0xa p+n FEE64s, 0xf n+n FEE64s pwer FEE64 1.8.W spectra - 20us FSR - attachments 13-15 ADC data item stats - attachment 16 per FEE64 Rate spectra - attachments 17 & 18 14.16 Removed bPlast cards from around snout - small improvment ADC stats Attachments 19-22 15.10 aida01 FEE64 adaptor PCB re-seated ( c. 1 pin row out of position ) ASIC data item stats - attachment 23 Significant improvement which approaches previous noise performance CC now assembling bPlast adaptor cards on a standoff Minitek frame HA/IK have confirmed that bPlast cables are screened on one side only - CC demonstrated that surfaces of both sides of the bPlast cabling are non-conductive Once assembled ( cards + power cables + input cables to bPlast detector ), observed increased noise similar to that observed this am Attempt to return to status quo ante did not reduce noise but observed problems with aida01 ( asics #3 & #4 did not load ) - attachment 24 An unusual error message - power cycled and rebooted FEE64s Slow comparator 0x64 ADC data item stats - attachment 27 Slow comparators 0xa p+n FEE64s, 0xf n+n FEE64s ADC data item stats - attachments 26 per FEE64 Rate spectra - attachment 25 This appears to have ( largely ) restored status quo ante. Large number of hot channels but other typically close to previously observed rates.
Attachment 1: Screenshot_from_2023-11-15_11-50-24.png

Attachment 2: Screenshot_from_2023-11-15_11-50-45.png

Attachment 3: Screenshot_from_2023-11-15_11-58-23.png

Attachment 4: Screenshot_from_2023-11-15_11-59-18.png

Attachment 5: Screenshot_from_2023-11-15_11-59-25.png

Attachment 6: Screenshot_from_2023-11-15_11-59-54.png

Attachment 7: Screenshot_from_2023-11-15_12-01-16.png

Attachment 8: Screenshot_from_2023-11-15_12-03-27.png

Attachment 9: Screenshot_from_2023-11-15_12-04-17.png

Attachment 10: Screenshot_from_2023-11-15_12-14-18.png

Attachment 11: Screenshot_from_2023-11-15_12-26-23.png

Attachment 12: Screenshot_from_2023-11-15_12-28-24.png

Attachment 13: Screenshot_from_2023-11-15_12-34-07.png

Attachment 14: Screenshot_from_2023-11-15_12-33-42.png

Attachment 15: Screenshot_from_2023-11-15_12-33-06.png

Attachment 16: Screenshot_from_2023-11-15_12-32-30.png

Attachment 17: Screenshot_from_2023-11-15_12-31-56.png

Attachment 18: Screenshot_from_2023-11-15_12-31-40.png

Attachment 19: Screenshot_from_2023-11-15_14-16-22.png

Attachment 20: Screenshot_from_2023-11-15_14-16-05.png

Attachment 21: Screenshot_from_2023-11-15_14-15-38.png

Attachment 22: Screenshot_from_2023-11-15_14-15-21.png

Attachment 23: Screenshot_from_2023-11-15_15-14-51.png

Attachment 24: Screenshot_from_2023-11-15_16-23-25.png

Attachment 25: Screenshot_from_2023-11-15_16-55-25.png

Attachment 26: Screenshot_from_2023-11-15_16-52-16.png

Attachment 27: Screenshot_from_2023-11-15_16-49-58.png

928	Wed Nov 22 15:12:40 2023	TD	/tmp/log8015_error

Attachment 1: log8015_error
[14/Nov/2023:15:14:55] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/Options/Options.tml [14/Nov/2023:15:14:55] sock8 Error 500 /AIDA/Options/Options.tml can't\ read\ &quot\;LogFlag&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Setting\ Option:\ \$index\ \$vl&quot\;\ \}&quot\;\n\ \ \ \ (procedure\ &quot\;do_setOpt&quot\;\ line\ 2)\n\ \ \ \ invoked\ from\ within\n&quot\;do_setOpt\ \$vl\ [third\ [lindex\ \$cgidata\ 1\]\]&quot\;\n\ \ \ \ (&quot\;OPTS&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 24)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;Options.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ Options.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::OPTION&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ OPTION\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDAS...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \\n\\n\\[Doc_Dynamic\\\]\\n\\n\\n&lt\;!\\n\\[global\\\ Httpd\\\;\\\ upvar\\\ #0\\\ Httpd\\[set\\\ Httpd(currentSocket)\\\]\\\ data\\\;\\\ set\\\ ClientIPAddress\\\ \\\$data(ipaddr)\\\;\\\ s...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/Options/Options.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/Options/Options.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/Options/Options.tml [14/Nov/2023:15:15:05] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/Options/Options.tml [14/Nov/2023:15:15:05] sock8 Error 500 /AIDA/Options/Options.tml can't\ read\ &quot\;LogFlag&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Setting\ Option:\ \$index\ \$vl&quot\;\ \}&quot\;\n\ \ \ \ (procedure\ &quot\;do_setOpt&quot\;\ line\ 2)\n\ \ \ \ invoked\ from\ within\n&quot\;do_setOpt\ \$vl\ [third\ [lindex\ \$cgidata\ 1\]\]&quot\;\n\ \ \ \ (&quot\;OPTS&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 24)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;Options.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ Options.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::OPTION&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ OPTION\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDAS...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \\n\\n\\[Doc_Dynamic\\\]\\n\\n\\n&lt\;!\\n\\[global\\\ Httpd\\\;\\\ upvar\\\ #0\\\ Httpd\\[set\\\ Httpd(currentSocket)\\\]\\\ data\\\;\\\ set\\\ ClientIPAddress\\\ \\\$data(ipaddr)\\\;\\\ s...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/Options/Options.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/Options/Options.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/Options/Options.tml [14/Nov/2023:15:17:00] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/Options/Options.tml [14/Nov/2023:15:17:00] sock8 Error 500 /AIDA/Options/Options.tml can't\ read\ &quot\;LogFlag&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Setting\ Option:\ \$index\ \$vl&quot\;\ \}&quot\;\n\ \ \ \ (procedure\ &quot\;do_setOpt&quot\;\ line\ 2)\n\ \ \ \ invoked\ from\ within\n&quot\;do_setOpt\ \$vl\ [third\ [lindex\ \$cgidata\ 1\]\]&quot\;\n\ \ \ \ (&quot\;OPTS&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 24)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;Options.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ Options.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::OPTION&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ OPTION\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDAS...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \\n\\n\\[Doc_Dynamic\\\]\\n\\n\\n&lt\;!\\n\\[global\\\ Httpd\\\;\\\ upvar\\\ #0\\\ Httpd\\[set\\\ Httpd(currentSocket)\\\]\\\ data\\\;\\\ set\\\ ClientIPAddress\\\ \\\$data(ipaddr)\\\;\\\ s...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/Options/Options.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/Options/Options.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/Options/Options.tml [14/Nov/2023:18:07:10] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/Options/Options.tml [14/Nov/2023:18:07:10] sock8 Error 500 /AIDA/Options/Options.tml can't\ read\ &quot\;LogFlag&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Setting\ Option:\ \$index\ \$vl&quot\;\ \}&quot\;\n\ \ \ \ (procedure\ &quot\;do_setOpt&quot\;\ line\ 2)\n\ \ \ \ invoked\ from\ within\n&quot\;do_setOpt\ \$vl\ [third\ [lindex\ \$cgidata\ 1\]\]&quot\;\n\ \ \ \ (&quot\;OPTS&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 24)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;Options.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ Options.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::OPTION&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ OPTION\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDAS...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \\n\\n\\[Doc_Dynamic\\\]\\n\\n\\n&lt\;!\\n\\[global\\\ Httpd\\\;\\\ upvar\\\ #0\\\ Httpd\\[set\\\ Httpd(currentSocket)\\\]\\\ data\\\;\\\ set\\\ ClientIPAddress\\\ \\\$data(ipaddr)\\\;\\\ s...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/Options/Options.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/Options/Options.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/Options/Options.tml [15/Nov/2023:16:20:50] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/TSCAN/TSCAN.tml [15/Nov/2023:16:20:50] sock8 Error 500 /AIDA/TSCAN/TSCAN.tml invalid\ command\ name\ &quot\;CheckASIC&quot\;\n\ \ \ \ while\ executing\n&quot\;\$vl&quot\;\n\ \ \ \ (&quot\;EXPERT&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 23)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;TSCAN.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ TSCAN.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::TSCAN&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ TSCAN\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASB...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \{\n\n[Doc_Dynamic\]\n\n\n&lt\;!\n[global\ Httpd\;\ upvar\ #0\ Httpd[set\ Httpd(currentSocket)\]\ data\;\ set\ ClientIPAddress\ \$data(ipaddr)\;\ set\ MyInfo\ \$data(self)\]\n&gt\;...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/TSCAN/TSCAN.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/TSCAN/TSCAN.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/TSCAN/TSCAN.tml [15/Nov/2023:18:51:34] sock8 error writing "sock8": broken pipe /DataAcquisitionControl/go.jpg [16/Nov/2023:10:57:51] sock8 error writing "sock8": broken pipe /DataAcquisitionControl/go.jpg [16/Nov/2023:18:53:09] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/Options/Options.tml [16/Nov/2023:18:53:09] sock8 Error 500 /AIDA/Options/Options.tml can't\ read\ &quot\;LogFlag&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Setting\ Option:\ \$index\ \$vl&quot\;\ \}&quot\;\n\ \ \ \ (procedure\ &quot\;do_setOpt&quot\;\ line\ 2)\n\ \ \ \ invoked\ from\ within\n&quot\;do_setOpt\ \$vl\ [third\ [lindex\ \$cgidata\ 1\]\]&quot\;\n\ \ \ \ (&quot\;OPTS&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 24)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;Options.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ Options.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::OPTION&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ OPTION\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDAS...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \\n\\n\\[Doc_Dynamic\\\]\\n\\n\\n&lt\;!\\n\\[global\\\ Httpd\\\;\\\ upvar\\\ #0\\\ Httpd\\[set\\\ Httpd(currentSocket)\\\]\\\ data\\\;\\\ set\\\ ClientIPAddress\\\ \\\$data(ipaddr)\\\;\\\ s...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/Options/Options.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/Options/Options.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/Options/Options.tml [17/Nov/2023:22:05:58] sock8 error writing "sock8": broken pipe /DataAcquisitionControl/go.jpg [18/Nov/2023:06:50:39] sock8 timeout /DataAcquisitionControl/DataAcquisitionControl.tml [18/Nov/2023:06:52:39] sock8 timeout /DataAcquisitionControl/DataAcquisitionControl.tml [18/Nov/2023:06:52:45] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} [18/Nov/2023:06:52:45] sock8 Error 500 {} can't\ read\ &quot\;data(version)&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{[info\ exists\ data(mime,connection)\]\}\ \{\n\tif\ \{[string\ tolower\ \$data(mime,connection)\]\ ==\ &quot\;keep-alive&quot\;\}\ \{\n\t\ \ \ \ Count\ keepalive\n\t\ \ \ \ set\ close\ 0\n\t\}\ el...&quot\;\n\ \ \ \ (procedure\ &quot\;HttpdCloseP&quot\;\ line\ 4)\n\ \ \ \ invoked\ from\ within\n&quot\;HttpdCloseP\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Httpd_ReturnData&quot\;\ line\ 11)\n\ \ \ \ invoked\ from\ within\n&quot\;Httpd_ReturnData\ \$sock\ text/html\ \ [TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)\]&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ DataAcquisitionControl/DataAcquisitionControl.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; [18/Nov/2023:06:52:45] sock8 LostSocket {} {can't read "data(version)": no such element in array} [18/Nov/2023:06:52:45] sock8 CloseError {can not find channel named "sock8"} [18/Nov/2023:06:54:00] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} [18/Nov/2023:06:54:00] sock8 Error 500 {} can't\ read\ &quot\;data(version)&quot\;:\ no\ such\ variable\n\ \ \ \ while\ executing\n&quot\;if\ \{[info\ exists\ data(mime,connection)\]\}\ \{\n\tif\ \{[string\ tolower\ \$data(mime,connection)\]\ ==\ &quot\;keep-alive&quot\;\}\ \{\n\t\ \ \ \ Count\ keepalive\n\t\ \ \ \ set\ close\ 0\n\t\}\ el...&quot\;\n\ \ \ \ (procedure\ &quot\;HttpdCloseP&quot\;\ line\ 4)\n\ \ \ \ invoked\ from\ within\n&quot\;HttpdCloseP\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Httpd_ReturnData&quot\;\ line\ 11)\n\ \ \ \ invoked\ from\ within\n&quot\;Httpd_ReturnData\ \$sock\ text/html\ \ [TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)\]&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ DataAcquisitionControl/DataAcquisitionControl.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; [18/Nov/2023:06:54:00] sock8 LostSocket {} {can't read "data(version)": no such element in array} [18/Nov/2023:06:54:00] sock8 CloseError {can not find channel named "sock8"} [21/Nov/2023:14:04:55] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file or directory} /AIDA/Check/Check.tml [21/Nov/2023:14:04:55] sock8 Error 500 /AIDA/Check/Check.tml could\ not\ read\ &quot\;/Embedded/XilinxLinux/ppc_4xx/rfs/aida01/tmp/mybuddy.txt&quot\;:\ no\ such\ file\ or\ directory\n\ \ \ \ while\ executing\n&quot\;file\ size\ \$mybuddy\ &quot\;\n\ \ \ \ (procedure\ &quot\;do_collect_info&quot\;\ line\ 16)\n\ \ \ \ invoked\ from\ within\n&quot\;do_collect_info\ &quot\;\n\ \ \ \ (&quot\;COLLECTINFO&quot\;\ arm\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;switch\ -glob\ \$w\ \{\n\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ RESET\ \ \ \ \{set\ started\ 0\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ CLEAR\ \ \ \ \{EmptyLog\}\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ELOG\ \ \ \ \ \{PrintLog\}\n\ \ \ \ \ \ \ \ \ ...&quot\;\n\ \ \ \ (procedure\ &quot\;do_click&quot\;\ line\ 23)\n\ \ \ \ invoked\ from\ within\n&quot\;do_click&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;if\ \{\$started\ !=\ 0\}\ \{\n\n\ \ \ \ \ variable\ JS\ &quot\;&quot\;\n\ \ \ \ \ variable\ LogFlag\n\n\ \ \ \ \ if\ \{\$LogFlag\ ==\ 1\}\ \{InsertLog\ &quot\;Last\ Updated:\ [clock\ format\ [clock\ seconds\]\ -form...&quot\;\n\ \ \ \ (file\ &quot\;Check.tcl&quot\;\ line\ 8)\n\ \ \ \ invoked\ from\ within\n&quot\;source\ Check.tcl&quot\;\n\ \ \ \ (in\ namespace\ eval\ &quot\;::Check&quot\;\ script\ line\ 6)\n\ \ \ \ invoked\ from\ within\n&quot\;namespace\ eval\ Check\ \{\n\ \ \ \ \ \ \ global\ env\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ tcl\ Common\ common.tcl\]\n\ \ \ \ \ \ \ source\ [file\ join\ \$env(MIDASB...&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;subst\ \{\n\n[Doc_Dynamic\]\n\n\n&lt\;!\n[global\ Httpd\;\ upvar\ #0\ Httpd[set\ Httpd(currentSocket)\]\ data\;\ set\ ClientIPAddress\ \$data(ipaddr)\;\ set\ MyInfo\ \$data(self)\]\n&gt\;...&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ #0\ [list\ subst\ \$script\]&quot\;\n\ \ \ \ (procedure\ &quot\;SubstFile&quot\;\ line\ 12)\n\ \ \ \ invoked\ from\ within\n&quot\;SubstFile\ /home/npg/MIDAS_Releases/23Jan19/MIDAS_200119/TclHttpd/Html/AIDA/Check/Check.tml\ \{\}&quot\;\n\ \ \ \ (&quot\;uplevel&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;uplevel\ 1\ [list\ SubstFile\ \$path\ \$interp\]&quot\;\n\ \ \ \ (procedure\ &quot\;Subst_File&quot\;\ line\ 7)\n\ \ \ \ invoked\ from\ within\n&quot\;Subst_File\ \$template\ \$interp&quot\;\n\ \ \ \ invoked\ from\ within\n&quot\;TemplateInstantiate\ \$sock\ \$path\ \{\}\ \$suffix\ \{\}\ \$Template(templateInterp)&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_application/x-tcl-template&quot\;\ line\ 9)\n\ \ \ \ invoked\ from\ within\n&quot\;\$cmd\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;Doc_Handle&quot\;\ line\ 20)\n\ \ \ \ invoked\ from\ within\n&quot\;Doc_Handle\ \$prefix\ \$path\ \$suffix\ \$sock&quot\;\n\ \ \ \ (procedure\ &quot\;DocDomain&quot\;\ line\ 44)\n\ \ \ \ invoked\ from\ within\n&quot\;DocDomain\ /\ /MIDAS/TclHttpd/Html\ sock8\ AIDA/Check/Check.tml&quot\;\n\ \ \ \ (&quot\;eval&quot\;\ body\ line\ 1)\n\ \ \ \ invoked\ from\ within\n&quot\;eval\ \$Url(command,\$prefix)\ [list\ \$sock\ \$suffix\]&quot\; /AIDA/Check/Check.tml [21/Nov/2023:16:09:41] sock8 error writing "sock8": broken pipe /DataAcquisitionControl/stop.jpg
936	Sun Dec 10 13:06:27 2023	TD	Sunday 10 December
14.05 S4 closed Water flow and temperature ( gauges outside S4 entrance ) OK BNC PB-5 pulser connected to p+n FEE64s by diasy chain of test + inputs ASIC settings 2023Nov16-18.55.20 p+n FEE64s slow comparator 0xa, n+n FEE64s 0xf All system wide checkks OK except adia08 ADC calibration failed DSSSD bias -150V leakage current -5.28uA - OK - attachment 1 FEE64 temperatures OK - attachment 2 ADC data item stats - attachment 3 rates dominated by relatively few 'hot' channels aida06 - no cables connected to FEE64 adaptor PCB per FEE64 Rate spectra - attachment 4 aida06 - no cables connected to FEE64 adaptor PCB system relatively quiet but has been quieter - no grounding of bPlast cabling and PSUs? p+n and n+n FEE64 1.8.W spectra - 20us FSR - attachments 5-8 aida06 - no cables connected to FEE64 adaptor PCB aida08 - no ADC calibration 18.25 SSSD bias -150V leakage current -5.100uA - OK - attachment 9 FEE64 temperatures OK - attachment 10 ADC data item stats - no significant change - attachment 11 rates dominated by relatively few 'hot' channels aida06 - no cables connected to FEE64 adaptor PCB per FEE64 Rate spectra - no significant change - attachment 12 aida06 - no cables connected to FEE64 adaptor PCB system relatively quiet but has been quieter - no grounding of bPlast cabling and PSUs? p+n and n+n FEE64 1.8.W spectra - 20us FSR - attachments 13-14 aida06 - no cables connected to FEE64 adaptor PCB aida08 - no ADC calibration
Attachment 1: Screenshot_from_2023-12-10_14-18-03.png

Attachment 2: Screenshot_from_2023-12-10_14-18-18.png

Attachment 3: Screenshot_from_2023-12-10_14-18-26.png

Attachment 4: Screenshot_from_2023-12-10_14-18-49.png

Attachment 5: Screenshot_from_2023-12-10_14-22-52.png

Attachment 6: Screenshot_from_2023-12-10_14-22-40.png

Attachment 7: Screenshot_from_2023-12-10_14-22-27.png

Attachment 8: Screenshot_from_2023-12-10_14-22-05.png

Attachment 9: Screenshot_from_2023-12-10_18-23-00.png

Attachment 10: Screenshot_from_2023-12-10_18-23-17.png

Attachment 11: Screenshot_from_2023-12-10_18-23-31.png

Attachment 12: Screenshot_from_2023-12-10_18-25-26.png

Attachment 13: Screenshot_from_2023-12-10_18-24-02.png

Attachment 14: Screenshot_from_2023-12-10_18-23-40.png

937	Mon Dec 11 09:57:54 2023	TD	Monday 11 December
Water flow and temperature ( gauges outside S4 entrance ) OK BNC PB-5 pulser connected to p+n FEE64s by diasy chain of test + inputs ASIC settings 2023Nov16-18.55.20 p+n FEE64s slow comparator 0xa, n+n FEE64s 0xf All system wide checkks OK DSSSD bias -150V leakage current -5.37uA - OK - attachment 1 FEE64 temperatures OK - attachment 2 ADC data item stats - attachment 3 rates dominated by relatively few 'hot' channels aida06 - no cables connected to FEE64 adaptor PCB per FEE64 Rate spectra - attachment 4 aida06 - no cables connected to FEE64 adaptor PCB system relatively quiet but has been quieter - no grounding of bPlast cabling and PSUs? p+n and n+n FEE64 1.8.W spectra - 20us FSR - attachments 5-8 aida06 - no cables connected to FEE64 adaptor PCB aida08 - no ADC calibration 14.43 Pulser walkthrough - p+n junction FEE64s BNC PB-5 settings amplitude 9.0-1.0V @ 1.0V step x10 attenuation tail pulse polarity + frequency 22Hz file DEC23/R5 15.47 R45 ends OK - see attachments 9-10 aida01 1.8.L pulser peak width 53 ch FWHM aida06 1.8.L pulser peak width 14 ch FWHM ( no input ) 15.47 file DEC23/R6 BNC PB-5 pulser amplitude 9.0V frequency 2Hz c. 19.00 Low intensity 238U fully stripped/H+/He+ - attachments 11-14 Fully stripped close to centre of DSSSD HEC energies observed from threshold to c. 1-2GeV 19.25 Beam off SC41 scaler input to level 1 MACB #3 ( of 4 ) moved to level 1 MACB #4 ( of 4 ) 21.00 checks DSSSD bias -150V leakage current -6.050uA - OK - attachment 15 FEE64 temperatures OK - attachment 16 ADC data item stats - attachment 17 rates dominated by relatively few 'hot' channels aida06 - no cables connected to FEE64 adaptor PCB BNC PB-5 config - attachment 18 Merger and TapeServer browser tabs and terminal servers - attachments 19-20 c. 160k data items/s merged c. 600kb to disk and forwarded to MBS 21.05.37 all stats zero'd 22.18 ADC data, DISC data, PAUSE, RESUME, WR data item stats - attachments 21-28 zero rate PAUSE/RESUME - one observed in c. 75 minutes
Attachment 1: Screenshot_from_2023-12-11_10-50-57.png

Attachment 2: Screenshot_from_2023-12-11_10-51-08.png

Attachment 3: Screenshot_from_2023-12-11_10-51-16.png

Attachment 4: Screenshot_from_2023-12-11_10-51-22.png

Attachment 5: Screenshot_from_2023-12-11_10-53-06.png

Attachment 6: Screenshot_from_2023-12-11_10-52-54.png

Attachment 7: Screenshot_from_2023-12-11_10-52-39.png

Attachment 8: Screenshot_from_2023-12-11_10-52-27.png

Attachment 9: Screenshot_from_2023-12-11_15-46-41.png

Attachment 10: Screenshot_from_2023-12-11_15-46-29.png

Attachment 11: Screenshot_from_2023-12-11_19-16-25.png

Attachment 12: Screenshot_from_2023-12-11_19-14-14.png

Attachment 13: Screenshot_from_2023-12-11_19-13-51.png

Attachment 14: Screenshot_from_2023-12-11_19-13-19.png

Attachment 15: Screenshot_from_2023-12-11_21-00-56.png

Attachment 16: Screenshot_from_2023-12-11_21-01-11.png

Attachment 17: Screenshot_from_2023-12-11_21-01-19.png

Attachment 18: Screenshot_from_2023-12-11_21-01-25.png

Attachment 19: Screenshot_from_2023-12-11_21-01-43.png

Attachment 20: Screenshot_from_2023-12-11_21-01-53.png

Attachment 21: Screenshot_from_2023-12-11_22-19-18.png

Attachment 22: Screenshot_from_2023-12-11_22-19-04.png

Attachment 23: Screenshot_from_2023-12-11_22-18-45.png

Attachment 24: Screenshot_from_2023-12-11_22-18-32.png

Attachment 25: Screenshot_from_2023-12-11_22-18-22.png

Attachment 26: Screenshot_from_2023-12-11_22-18-04.png

Attachment 27: Screenshot_from_2023-12-11_22-17-45.png

938	Mon Dec 11 11:05:27 2023	TD	WR timestamp fail aida05 & aida07
MACB config 1x level 0 4x level 1 Problem appears to related to level 1 MACB #3 ( 3 of 4 ). Transferring FEE64 inputs to MACB #4 appears to fix the problem. Assume this means either MACB #3 or the cable to it from level 0 is the problem?
Attachment 1: Screenshot_from_2023-12-11_12-04-59.png

Attachment 2: Screenshot_from_2023-12-11_12-04-44.png

Attachment 3: Screenshot_from_2023-12-11_12-04-40.png

Attachment 4: Screenshot_from_2023-12-11_12-04-35.png

Attachment 5: Screenshot_from_2023-12-11_12-04-29.png

Attachment 6: Screenshot_from_2023-12-11_12-07-18.png

Attachment 7: Screenshot_from_2023-12-11_12-07-14.png

Attachment 8: Screenshot_from_2023-12-11_12-07-09.png

Attachment 9: Screenshot_from_2023-12-11_12-06-27.png

Attachment 10: Screenshot_from_2023-12-11_12-04-29.png

Attachment 11: Screenshot_from_2023-12-11_12-58-24.png

939	Mon Dec 11 23:56:36 2023	TD	Tuesday 12 December
00.55 Observe high frequency noise in aida02 & aida04 ( n+n FEE64s ) - attachments 1-5 and aida05 ( p+n FEE64 ) frequency c. 5MHz Oscillation unchanged by HV cycle ASIC control load FEE64 power cycle BNC PB-5 pulser OFF BNC PB-5 pulser output disconnected from test + cable ( and remains disconnected ) BB7 HV and preamp power OFF - oscillation disappears Note - BB7 HV and power have been on all day and AIDA was running OK until at least 22.18 11.12.23 - go figure! 01.42 file DEC23/R7 02.00 checks DSSSD bias -150V leakage current -5.980uA - attachment 5 FEE64 teperatures OK - attachment 6 ADC data item stats OK - attachment 7 Merger & TapeServer screens - attcahments 8 & 9 per FGEE64 Rate spectra - attachment 10 1.8.W spectra - 20us FSR - attachments 11 & 12 02.18 ASIC check load x2 02.20 file DEC23/R8 Final FRS setting - fragments SE 238U, PID uncertain online 02.22 zero all spectra & stats 03.23 degrader changed to 4350mg file DEC23/R9 03.25 zero all spectra & stats 06.00 beam stopped file R9 closed 06.18 pulser walkthrough test - BNC PB-5 amplitude 9.0-1.0 @ 1.0V step attenuation x10 polarity - tail pulse 1ms decay time file DEC23/R11
Attachment 1: Screenshot_from_2023-12-12_00-56-17.png

Attachment 2: Screenshot_from_2023-12-12_00-55-57.png

Attachment 3: Screenshot_from_2023-12-12_00-55-20.png

Attachment 4: Screenshot_from_2023-12-11_22-19-18.png

Attachment 5: Screenshot_from_2023-12-12_01-58-19.png

Attachment 6: Screenshot_from_2023-12-12_01-58-29.png

Attachment 7: Screenshot_from_2023-12-12_01-58-51.png

Attachment 8: Screenshot_from_2023-12-12_01-59-08.png

Attachment 9: Screenshot_from_2023-12-12_01-59-29.png

Attachment 10: Screenshot_from_2023-12-12_02-03-46.png

Attachment 11: Screenshot_from_2023-12-12_02-01-47.png

Attachment 12: Screenshot_from_2023-12-12_02-01-31.png

Attachment 13: Screenshot_from_2023-12-12_06-21-41.png

Attachment 14: Screenshot_from_2023-12-12_06-20-09.png

Attachment 15: Screenshot_from_2023-12-12_06-19-56.png

Attachment 16: Screenshot_from_2023-12-12_06-19-43.png

Attachment 17: Screenshot_from_2023-12-12_06-19-41.png

Attachment 18: Screenshot_from_2023-12-12_06-57-36.png

943	Thu Mar 28 11:10:09 2024	TD	Test of 4x FEE64s at AIDA test station, T9, STFC DL
Test of 4x FEE64s at AIDA test station, T9, STFC DL startup.tcl changed from 'aida01 aida03' to 'aida01 aida02 aida03 aida04' MIDAS 8015 server restarted Power ON All system wide checks OK Pulser BNC PB-5 Amplitude 1.0V Attenuation x1 Polarity + Frequency 100Hz Tail pulse, decay time 1ms Delay 250ns (min) ASIC settings - attachments 1-4 Slow comparator 0x80 N.B. new ASIC settings software in use Adaptor PCB without jumpers FEE64 temperatures OK - attachment 5 WR timestamp OK - attachment 6 aida01 Rate, 1L and 1W spectra OK - attachments 7-9 FEE64 temperatures OK - attachment 10 aida02 Rate, 1L and 1W spectra OK - attachments 11-13 aida03 Rate, 1L and 1W spectra OK - attachments 14-17 No ADC spectra asic #4 but Rate, HitRate, 4W spectra all indicate asic #4 working OK - contact issue? aida04 Rate, 1L and 1W spectra OK - attachments 18-23 Bad ADC spectra asic #2 but* Rate, HitRate, 2W spectra all indicate asic #2 working OK - contact issue? Date/time ASIC mezzanine Pulser peak width ..L MAC Status FEE64 PCB serial # (channels FWHM) 28.3.24 11.28 aida01 ? 7.1,7.0,6.8,7.0 41:f6:ee OK 28.3.24 11.44 aida02 GOC-7226-1-39/-0040 14.0,13.7,13.3,14.0 41:cf:ad OK 28.3.24 12.14 aida03 ? 13.2,13.2,12.0,? 42:0d:0b OK 28.3.24 11.44 aida04 GOC-7226-1-19/-0037 15.1,?,12.8,12.8 42:0c:89 OK Following disassembly and re-assembly aida03 ..L 15.0,15.9,15.0,15.4 ch FWHM ( ADC data all channels, similar peak widths all channels ) ..W spectra OK Rate, HitRate spectra OK aida04 no change - 2..L spectra still bad
Attachment 1: Screenshot_from_2024-03-28_10-59-53.png

Attachment 2: Screenshot_from_2024-03-28_11-00-07.png

Attachment 3: Screenshot_from_2024-03-28_11-00-22.png

Attachment 4: Screenshot_from_2024-03-28_11-00-56.png

Attachment 5: Screenshot_from_2024-03-28_11-02-07.png

Attachment 6: Screenshot_from_2024-03-28_11-25-55.png

Attachment 7: Screenshot_from_2024-03-28_11-08-21.png

Attachment 8: Screenshot_from_2024-03-28_11-22-48.png

Attachment 9: Screenshot_from_2024-03-28_11-24-21.png

Attachment 10: Screenshot_from_2024-03-28_11-33-20.png

Attachment 11: Screenshot_from_2024-03-28_11-52-47.png

Attachment 12: Screenshot_from_2024-03-28_11-39-59.png

Attachment 13: Screenshot_from_2024-03-28_11-36-45.png

Attachment 14: Screenshot_from_2024-03-28_12-10-09_1.png

Attachment 15: Screenshot_from_2024-03-28_12-08-53.png

Attachment 16: Screenshot_from_2024-03-28_12-16-30.png

Attachment 17: Screenshot_from_2024-03-28_12-18-59.png

Attachment 18: Screenshot_from_2024-03-28_12-36-41.png

Attachment 19: Screenshot_from_2024-03-28_12-35-28.png

Attachment 20: Screenshot_from_2024-03-28_12-31-41.png

Attachment 21: Screenshot_from_2024-03-28_12-24-18.png

Attachment 22: Screenshot_from_2024-03-28_12-49-49.png

944	Thu Mar 28 15:43:47 2024	TD	Unable to start MIDAS DAQ with 1x FEE64 ( aida04 )
At AIDA test station T9, STFC DL unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) - see attachments aida04 appears to have booted OK and I can connect using telnet MIDAS 8015 server exits - signal 1
Attachment 1: Screenshot_from_2024-03-28_15-43-28.png

Attachment 2: Screenshot_from_2024-03-28_15-43-08.png

Attachment 3: Screenshot_from_2024-03-28_15-47-49.png

946	Wed Apr 10 16:45:59 2024	TD	AIDA interlock
Honeywell HSS DPS sensor information https://elog.ph.ed.ac.uk/AIDA/932 Cynergy3 FSVPLC - attachment 1 Honeywell sensor - red LED continuously lit - OK Connecting FSVPLC to the interlock box causes green power LED of 24V adaptor to blink ~Hz frequency indicating a fault condition
Attachment 1: cynergy3-fsvplc-v3.pdf

948	Mon May 5 13:59:32 2025	TD	CARME NFS
-bash-3.2# nfsstat -v Client packet stats: packets udp tcp tcpconn 0 0 0 0 Client rpc stats: calls retrans authrefrsh 18813 1 0 Client nfs v2: null getattr setattr root lookup readlink 0 0% 4438 49% 84 0% 0 0% 1236 13% 61 0% read wrcache write create remove rename 2681 29% 0 0% 251 2% 56 0% 68 0% 15 0% link symlink mkdir rmdir readdir fsstat 5 0% 10 0% 5 0% 77 0% 64 0% 3 0% Client nfs v3: null getattr setattr lookup access readlink 0 0% 5356 54% 0 0% 491 5% 2066 21% 25 0% read write create mkdir symlink mknod 346 3% 0 0% 0 0% 0 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 0 0% 0 0% 0 0% 0 0% 0 0% 1471 15% fsstat fsinfo pathconf commit 0 0% 2 0% 0 0% 0 0% -bash-3.2# nfsstat -m / from /dev/root Flags: rw,relatime,vers=2,rsize=4096,wsize=4096,namlen=255,hard,nolock,proto=udp,timeo=11,retrans=3,sec=sys,addr=192.168.11.99 /MIDAS from myserver:/MIDAS Flags: rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,nolock,proto=tcp,timeo=600,retrans=2,sec=sys,addr=192.168.11.99 -bash-3.2# cat /etc/mtab /dev/root / auto rw 0 0 none /proc proc rw 0 0 sysfs /sys sysfs rw 0 0 tmpfs /dev/shm tmpfs rw,size=64m 0 0 myserver:/MIDAS /MIDAS nfs rw,tcp,nolock,addr=192.168.11.99 0 0 -bash-3.2# cat /etc/fstab /dev/root / auto defaults 0 0 none /proc proc defaults 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs rw,size=64m 0 0 myserver:/MIDAS /MIDAS nfs tcp,nolock
244	Sat May 28 07:31:07 2016	Saturday 8 May 2016	TD, CG
15.20 DAQ histogramming & data transfer #1 enabled Merger configured, started, input paused Following DAQ GO nnaida9 data transfer 'X' nnaida19 histogramming 'H' disappear - see attachments 1-7 Workaround suggested by https://elog.ph.ed.ac.uk/AIDA/230 appear not to work 16.25 Resolved data transfer issue nnaida9 producing SYNCs but merger data queue blocked rebooted aidas1 nnaida19 histogramming issue remains 17:50 6 DSSD insalled From front to back of stack: DSSD 1 = 3131-9 2 = 3058-25 (rotated 90deg w.r.t. other detectors - p-strips horizontal and n-strips vertical) 3 = 2998-23 4 = 3058-5 5 = 3058-6 6 = 3058-7 HV mapping (-ve bias): DSSD Braid Core 1 nnaida20 nnaida17 2 nnaida19 nnaida18 3 nnaida12 nnaida14 4 nnaida11 nnaida13 5 nnaida4 nnaida6 6 nnaida3 nnaida5 18.55 Change ASIC settings nnaida18, nnaida21 positive -> negative input diode link threshold 0xca -> 0xbf LED settings negative -> positive, threshold 7200 -> 9000 nnaida19, nnaida24 negative -> positive input diode link threshold 0x11 -> 0x23 LED settings positive -> negative, threshold 9000 -> 7200 Saved new settings to DB key 2016May28-18.52.07 Saved new DB key to Options
Attachment 1: 50.png

Attachment 2: 51.png

Attachment 3: 52.png

Attachment 4: 53.png

Attachment 5: 54.png

Attachment 6: 55.png

Attachment 7: 56.png

Attachment 8: caen_remote_0.png

Attachment 9: caen_remote_1.png

17	Fri Oct 24 15:05:28 2014	Patrick and Alfredo	new VHDL: FEE_Riken_Apr14_21.bin
New VHDL loaded in NNAIDA#11,#12,#13,#14: /MIDAS/Aida/FEE_Riken_Apr14_21.bin The code introduces the feature of turning ON or OFF individual ASICs in a FEE64 card. This is achieved by turning off the clock signal to a individual ASIC, which then will not produce any data. Feature controled through "ASIC readout bugger and control", by register onn base address 0x300 and offset 7 (until now 'ASIC readout enable'). Only basic tests of new VHDL were done, but the system seems to be working as before and the operation of turning off individual ASICs works as expected. Screenshot is sample of turning off ASIC3 in NNAIDA#12.
15	Thu Oct 2 15:23:38 2014	Patrick Coleman-Smith and Chris Griffin	Trial with Filtered AIDA PSU
Assembled three more of the filter boards and installed them in the AIDA PSU with the first, wired to use the switchmode power supply. Powered up nnaida14 first and went fine. Just the boot sequence and measure the voltages for stability. Powered up the remainder and all was well. Setup and go..... the rates were way too high in all of them. nnaida12 was running at 200k/sec+ most of the time. The other three could be reduced in rate by changing the slow comp thresh as would be expected but 12 wasn't any good. Tried: Remove MACB HDMI.... no good isolate psu earth from NIM crate ( put psu on foam support ) ..... no good Checked the filter output and the sine wave reported yesterday ( nnaida2 ) was present on all voltage rails but no evidence of high frequency noise. Set all channels to 1GeV, with Slow comp thresh of 10, and 11,13 & 14 showed roughly the same rate of 10 to 15k/sec. Peaks in the spectra were FWHM 12 at a random sample. nnaida12 would not conform. Changed back to the bench power supply connections so Chris can continue.
7	Thu Sep 18 11:18:46 2014	Patrick Coleman-Smith	Trying the Liverpool HV supply
The SY1527 supply was delivered with three modules. A cable has been made with LEMO00 connectors to connect to the detector adaptor HV inputs. The SY1527 needed an external VGA display and ps2 keyboard. The software appears to be windows 98 based and won't boot until the bios is told to ignore drive D. On boot the Drive A must be skipped. I will provide training when others wish to use the system Channel 0 is being used and has been tested with a voltmeter to provide the correct voltage at the LEMO00 connections. The control seems to be reliable and trips with over current. 200 volts has been applied to the detector with a final current of 3.9uA. The ramp up/down rate is 1V/second. The acquisition system was run with pulser OFF and reference setting of 0x30 on the two negative modules nnaida11 and 12. The rates were 130K/sec + on both the 11 and 12. Run down the HV and add a 'scope probe ( 10MR and 11pF ) . Run up and the 'scope shows 20mv pk-pk mushy noise with occasional 200mV+ bursts. The acquisition performance did not improve. Changed the reference on 11 and 12 to 0x90 and switch on the pulser then the rate became 20K to 25K. Stat spectra show that ASIC3 and 4 on these boards are still more active than 1 & 2. Changed the reference on 11 down to 0x40 and Stat spectrum shows ASIC 3 and 4 become more active. Added an R/C filter at the HV iput to the adaptor board. Removed the 'scope probe. The filter is the same as used with the HV supply in a box block from PorgamRays. No real improvement. Changed 11 & 12 reference back to 0x90. Waveforms in 12 seem normal. Back to working on the VHDL changes now.
8	Mon Sep 22 09:34:37 2014	Patrick Coleman-Smith	Clue to difference between ASICs 1&2 and 3&4
While investigating a VHDL conundrum I have noticed that the Mux ADC serial readout clock has a 'FAST' slew rate on ASICs 1&2 and a normal slew rate on ASICs 3&4. Is it possible that the higher slew rate is actually better filtered by the ASIC de-coupling etc than the slower one. Unfortunately I can't try this out yet as the "conundrum" means the VHDL version isn't good enough just yet. Hopefully today..... Patrick
9	Thu Sep 25 11:35:18 2014	Patrick Coleman-Smith	Removing the MACB from the system
I have been wondering if the 0v path from the FEE64s to the MACB where they are joined is a possible problem. I have been contemplating an isolated LVDS interface for the 50Mhz clock to test the idea. Fortunately i recalled the 50Mhz internal oscillator in each FEE64. I have disconnected the FEE64s from the MACB and run them using their internal 50Mhz clok. No apparent change in performance..... With Detector on. Using 'little block' HV supply. 11&12 with pre-amp ref set at 0x30. The rates are as follows:- nnaida11: 19k nnaida12: 52k nnaida13: 10k nnaida14: 10k The stat spectra of 13 & 14 look ok. The stat spectra of 11 and 12 are strange and noisy but not "mad". Maybe when the power supply filters are in place this can be revisited
10	Thu Sep 25 11:53:34 2014	Patrick Coleman-Smith	Backup a step to check ASICs
Disconnected the adaptors with the detector. Added the adaptors with the kapton cables only attached. Connected the pulser outputs ( pos and neg ). nnaida11,13 & 14 : Stat spectra are normal. Rates are 10k to 16k nnaida12 has normal stat spectrum with ASIC3 only showing channel 5. Power cycle and re-try. No different. Suggest change the Mezzanine on nnaida12 and ask for the ASIC to be replaced..... maybe visible signs of problem ?
11	Wed Oct 1 13:28:03 2014	Patrick Coleman-Smith	Power supply filters
The new pcb for the power supply filter arrived. I assembled the components ( after finding the whoops ) and connected it to the bench power supply for nnaida2. nnaida2 functions just about the same as before but the power supply filter results seem amazing. I have measured the signals on the power supply before and after the filter. The 'scope is referenced to earth on the filter board and this earth is connected to earth through the +5v@10A supply. Before the filter the average noise on the rail ( AC coupled ) is 33mV and after is ....... 5mV pretty exciting stuff. I have attached the two 'scope pictures. The same measurements on the +7v, -6v and 0v rails give similar improvements. The choke on the +5v rail measures 34 degrees C so care will need to be taken. Next I will measure the voltage drops across the filter and decide on the correct voltage settings for the AIDA switch mode power supply. Then install the filter into the supply and check ..... and check ......
Attachment 1: RTOScreenshot_2014-10-01_1_121051.png

Attachment 2: RTOScreenshot_2014-10-01_0_121012.png

12	Wed Oct 1 15:15:32 2014	Patrick Coleman-Smith	Power supply filters
2.0.L FWHM:14.26 2.15.L ( 270pF ) FWHM : 119.04 (ooops found the 'scope channel was on 20Mhz BW filter ) DC measurements. At FEE64 :- +7.822 , -6.36, +4.937 at Filter output ( AIDA Cable input ) :- +7.96, -6.46, 5.37 at filter input:- +7.97, -6.476, +5.488 Set supply with these voltages and add filter. Measured earth point to mains earth pin as 0.095ohms. Power-up with nnaida2. ADCs Calibrate fine....successful boot. Voltages at FEE64:- +7.802, -6.324, +4.887. I will adjust the power supply voltages to match the FEE64 previous setup. 2.0.L FWHM :13.83 2.15.L FWHM:116.6 So not really a difference in performance at this simple level. Attached are some oscilloscope traces of the six voltage rails after the filter on the filter board. +5v & 0v , -6v & 0v, +7v & 0v relative to the earth on the filter board. Attached are some oscilloscope traces of the six voltage rails before the filter on the filter board. +5v & 0v , -6v & 0v, +7v & 0v relative to the earth on the filter board. There is a nice sine wave at 235KHz that needs to be finished off perhaps. Otherwise the filter seems to be doing well. Next set of 'scope traces are across the three supplies. +7v, -6v, +5v. Sine wave is present ( 220KHz ) at 80mv, 80mv, 105mv. Next I'll try this supply on nnaida12 ( detector negative ) ...... next entry ....
Attachment 1: RTOScreenshot_2014-10-01_2_145340.png

Attachment 2: RTOScreenshot_2014-10-01_3_145424.png

Attachment 3: RTOScreenshot_2014-10-01_4_145509.png

Attachment 4: RTOScreenshot_2014-10-01_5_145529.png

Attachment 5: RTOScreenshot_2014-10-01_6_145604.png

Attachment 6: RTOScreenshot_2014-10-01_7_145655.png

Attachment 7: RTOScreenshot_2014-10-01_8_145838.png

Attachment 8: RTOScreenshot_2014-10-01_9_145902.png

Attachment 9: RTOScreenshot_2014-10-01_11_150000.png

Attachment 10: RTOScreenshot_2014-10-01_12_150025.png

Attachment 11: RTOScreenshot_2014-10-01_13_150050.png

Attachment 12: RTOScreenshot_2014-10-01_14_151051.png

Attachment 13: RTOScreenshot_2014-10-01_15_151141.png

Attachment 14: RTOScreenshot_2014-10-01_16_151223.png

13	Wed Oct 1 15:41:07 2014	Patrick Coleman-Smith	Power supply filters #3
Measuring the signal at the FEE64 end. +5v , -6v , +7v, +7v The two other 'scope channels are connected by FET probes to the FEE64. I now see there is a ground connection.... so i will remove it and re-measure the signals in the filter. No real difference. Measuring at the FEE64 and the spikes when the Mux ADC is reading out have disappeared.
Attachment 1: RTOScreenshot_2014-10-01_17_152532.png

Attachment 2: RTOScreenshot_2014-10-01_18_152907.png

Attachment 3: RTOScreenshot_2014-10-01_19_152935.png

Attachment 4: RTOScreenshot_2014-10-01_20_153021.png

Attachment 5: RTOScreenshot_2014-10-01_21_153113.png

Goto page Previous 1, 2, 3 ... 23, 24, 25 ... 44, 45, 46 Next

ELOG V3.1.3-7933898