| ID |
Date |
Author |
Subject |
|
468
|
Fri Nov 25 15:56:36 2016 |
CG, DK | Saturday 26 November | 00.55 Bias and leakage currents ok (attachments 1+2).
Temps ok (attachment 3).
01.40 DAQ starts (RIBF03R1 - Run R1)
Pulser walkthrough
BNC PB_4 amplituides 90,000 - 10,000 @ 10,000 step
x5 attenuator IN
frequency 250Hz range
t_r 50ns tau_d 50us
polarity -, tail pulse, delay MIN
01.55 Ambient temperature +24.8 deg C, d.p. -2.2 deg C, RH 16.6%
02.05 DAQ starts (RIBF03R1 - Run R2)
Pulser walkthrough - same settings as above.
BNC PB_4 amplitudes 14,000 - 2,000 @ 2,000 step
02.48 Run R3 started.
Pulser off. Background run.
15cm Pb wall removed
6mm Pb degrader installed between MUSIC 1 & 2
variable degrader 1mm, 0.5mm & 0.3mm W + 1mm Al attached to each W sheet.
04.14 Noticed R3 stopped
05.40 Difficulty starting DAQ
'want first SYNC' from merger
lost contact with nnaida19 - restarting merger
TclHttpd server on nnrpi1 crashed - restarted remotely
unable to power cycle - need to check fuses when next obtain access
whilst waiting boot aidas1
F11 rate c. 450Hz
AIDA veto plastic c. 3200Hz
07.30 R7 started with beam.
07.38 Beam stopped.
R7 continues.
08.12 Beam returned to F11.
File R7_9
08.50 Beam stopped.
Start of R7_17.
Using implantdecay.f saw no HEC events in any DSSD. Removed 2mm of Pb degrader.
We re-insert all the variable Al degraders (for now) for safety. We can remove them again when the beam
comes back, as necessary.
Secondary beam current expected to remain at ~50cps.
Now no beam for ~1hr.
10.15 Beam comes back
There was a minor delay to get the beam back from some accelerator issue (SRQ issue I am told)
F11 plastic rate is about 10 cps, still I can see nothing in AIDA low gain
Main exp. team confirms several 40Mg events within minutes, and makes jokes about old Nature paper with 10 days of
data to do that.
10.25 Trying to find AIDA's implants, using MIDAS Sort in online mode
Removed the variable degraders, one-by-one. Still nothing? (this is now circa file R7_36)
Is there a possibility that the "low gain" setting of the ASIC is too high energy for something like 40Mg?
We try to check the implant rate with the AIDA veto plastic
During this time, we moved degraders in and out, several times, watching the oscilloscope and visual scalers by
video link in F11
10.39 We check some scalers of the dE before AIDA (including F11 x plastic behind AIDA)
We can see a reasonable effect as expected for these detector count rates
The count rate never exceeds about 50 to 60 cps at maximum for dE
I don't trust MIDAS Sort in online mode
it is known to show factor 10 or less of the real rate, previously)
Check the data file R7_37 -> may show 1 to 2 Hz
We should decrease the low gain (heavy ion) threshold or dynamic range for the ASICs?
But DK is not an expert of that, and doesn't want to cause AIDA to cease functionality...
11.03 Checking runs later than R7_37 (i.e. _38 to _42)
Never see anything. R7_37 must have been taken with some amount of degraders in
We surmise that the ions are mostly punching through AIDA, owing to low Z.
11.05 We put in the 0.5 W + 1 mm Al degrader back, to see if we can get back the condition of _37...
R7_44 after a short delay should have this condition.
There can be 1 cps or something, though with small statistics it is hard to say...
It seems to be definitely non-zero though, compared to some runs like _38 to _42
11.10 Add the 1.0 W + 1mm Al (with the 0.5 W and 1 mm Al) degrader
R7_45 begins ~400 MB before this time.
We can see some kinds of definite hit events **with low stats** (1 to 2 Hz in several detectors in some data blocks)
It seems to be, if all degraders are out, that the beam punches through AIDA, and dE is below the thresholds
Of course, the count rate at F11 is only 10 cps, so we cannot conclude much with strong confidence...
11.17 Remove all variable degraders again (near halfway point of R7_46)
We need a decent LISE++ file to get a clue of where these ions are stopping...!
11.42 Beam is stopped because one of the cyclotron RF systems is down.
This occurs around the middle of file R7_50
12.40 Still waiting for beam. I try a more definitive analysis of R7_45
Partial disk analysis of file R7_45:
First part of data look like this:
*** DSSSD # 1 count: 4 old count: 2 dt: 1.06 s HEC rate: 1.89 Hz
*** DSSSD # 2 count: 1 old count: 0 dt: 1.06 s HEC rate: 0.94 Hz
*** DSSSD # 3 count: 0 old count: 0 dt: 1.06 s HEC rate: 0.00 Hz
*** DSSSD # 4 count: 0 old count: 0 dt: 1.06 s HEC rate: 0.00 Hz
*** DSSSD # 5 count: 0 old count: 0 dt: 1.06 s HEC rate: 0.00 Hz
*** DSSSD # 6 count: 10 old count: 10 dt: 1.06 s HEC rate: 0.00 Hz
Notice that we get 10 total counts in DSSD#6, and practically 0 in any other layer (2 in DSSD#1)
Now, as the analysis progresses, we do not increase the counts in DSSD#6, but we start to see events in other layers
*** DSSSD # 1 count: 128 old count: 128 dt: 343.81 s HEC rate: 0.37 Hz
*** DSSSD # 2 count: 115 old count: 115 dt: 343.81 s HEC rate: 0.33 Hz
*** DSSSD # 3 count: 91 old count: 90 dt: 343.81 s HEC rate: 0.26 Hz
*** DSSSD # 4 count: 41 old count: 40 dt: 343.81 s HEC rate: 0.12 Hz
*** DSSSD # 5 count: 13 old count: 13 dt: 343.81 s HEC rate: 0.04 Hz
*** DSSSD # 6 count: 12 old count: 12 dt: 343.81 s HEC rate: 0.03 Hz
*** ENTRY finish ends
Notice how only 12 counts in DSSD#6 (two new counts) but 128 counts in DSSD#1 (126 new counts).
We can conclude that with 3 mm Pb (fixed), and 0.5 mm W and 1.0 mm Al, some of the beam is stopping in DSSD #6, and mostly
punches through.
Then, when 1.0 mm W and 1.0 mm Al are added, we shift the implantation to the beginning of AIDA (or some in the air
before AIDA).
So, we should try the 1 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al) once the beam returns.
13.34 Stop run 7.
Change the medium/low energy selection on ASIC control from 0x0 to 0x1 (from low to medium energy mode)
(Already, the high energy setting is 0x2 and we cannot decrease it)
Start run 8. It looks okay, though of course now data rate becomes much smaller.
13.36 Beam is now on again. F11 rate has decreased 1 order of magnitude (now it is 0 to 2 Hz)
14.00 As expected, data rate becomes quite low, as the low energy mode has typically many events (10kHz or so)
But now we don't see anything in the high energy mode as before
3 mm Pb remains in, and variable degraders are all out (mistake...we meant for some to be in)
Strange! But the beam at F11 does not seem to be the same rate as before the cyclotron issues...
Realized that someone was checking the beam at an earlier focal plane and that F11 has no beam...
(Post-dated note: forgot to hit "Start ASIC Readout" --- duh oops.
RUN 8 IS JUNK, AS NO ASIC READOUT BY USER ERROR (DK)
14.12 Stop run 8. Change the medium energy mode back to low energy mode of all ASICs. Restart as run 9.
But the merger data links don't alternate colors when I reload the merger screen. Is it bad?
Data rate is still very low, but that doesn't make much sense.
Okay, now I start ASIC Readout! Woohoo!
But it seems some magnetic dipole of BigRIPS must have an improper setting, explaining the 1 cps rate at F11...
15.33 Bias and leakage currents OK (attachments 9 & 10).
FEE64 temperatures OK (attachment 11).
15.40 SRIM 2013
145MeV/u (5800MeV) 40Mg + 3mm Pb
sigma 0.55 deg
ang X (str) 0.90 deg
assume Pb - DSSSD distance c. 2m => 2000 x tan(0.55 deg) ~ 17mm rms
consider reducing Pb - DSSSD distance |
| Attachment 1: bias1.png
|
|
| Attachment 2: bias2.png
|
|
| Attachment 3: temps.png
|
|
| Attachment 4: 100.png
|
|
| Attachment 5: 101.png
|
|
| Attachment 6: 103.png
|
|
| Attachment 7: 104.png
|
|
| Attachment 8: temps.png
|
|
| Attachment 9: 200.png
|
|
| Attachment 10: 201.png
|
|
| Attachment 11: 202.png
|
|
|
467
|
Fri Nov 25 07:33:44 2016 |
TD | Friday 25 November | 16.35 DSSSD bias & leakage currents OK - see attachments 1 & 2
note - the significant increase observed yesterday appears to be plateau'ing
FEE64 temperatures OK - see attachment 3
17.10 Rate, HitRate, 1.8.L & 1.8.W spectra - see attachments 4-9 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 11.png
|
|
| Attachment 5: 12.png
|
|
| Attachment 6: 13.png
|
|
| Attachment 7: 14.png
|
|
| Attachment 8: 17.png
|
|
| Attachment 9: 18.png
|
|
|
466
|
Thu Nov 24 01:07:14 2016 |
TD, CG | Thursday 24 November | 10.05 DSSSD bias & leakage currents OK - see attachments 1 & 2
note - the significant increase observed yesterday appears to be plateau'ing
FEE64 temperatures OK - see attachment 3
10.19 System-wide tests - see attachments 4-17
Clock status fails for varying combinations of nnaida5, 7, 8, 15 & 16
ADC calibration fails for nnaida23
All other tests OK
10.27 LOCAL controls for nnaida5, 6, 7, 8, 15 & 16 - see attachments 18-23
10.37 Start DAQ (Nov2016/R1)
Analysis of R1_0 demonstrates ADC & disc data synchronised - see attachments 24 & 25
Analysis of R1_0 - see attachment 26
20.10 Successfully restarted the DAQ after fill cycle stop.
Bias and leakage currents ok (attachments 27+28).
Temps ok (attachment 29). |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: 6.png
|
|
| Attachment 7: 7.png
|
|
| Attachment 8: 8.png
|
|
| Attachment 9: 9.png
|
|
| Attachment 10: 10.png
|
|
| Attachment 11: 11.png
|
|
| Attachment 12: 12.png
|
|
| Attachment 13: 13.png
|
|
| Attachment 14: 14.png
|
|
| Attachment 15: 15.png
|
|
| Attachment 16: 16.png
|
|
| Attachment 17: 17.png
|
|
| Attachment 18: 18.png
|
|
| Attachment 19: 19.png
|
|
| Attachment 20: 20.png
|
|
| Attachment 21: 21.png
|
|
| Attachment 22: 22.png
|
|
| Attachment 23: 23.png
|
|
| Attachment 24: 30.png
|
|
| Attachment 25: 31.png
|
|
| Attachment 26: R1.out
|
*** TDR format 3.3.0 analyser - TD - October 2016
*** TDR format 3.3.0 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 223675520 ( 579476.2 Hz)
Other data format: 37404321 ( 96903.4 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 94 ( 0.2 Hz)
RESUME: 94 ( 0.2 Hz)
SYNC100: 3533023 ( 9153.0 Hz)
FEE64 disc: 33860100 ( 87721.4 Hz)
MBS info: 11010 ( 28.5 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 5196 ( 13.5 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 385.996 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.529 0.267
2 0.000 0.000
3 0.000 0.000
4 0.000 0.000
5 0.094 0.000
6 0.000 0.000
7 0.000 0.000
8 0.000 0.000
9 0.040 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.054 0.000
15 0.000 0.000
16 0.000 0.000
17 0.112 0.000
18 0.001 0.000
19 0.011 0.000
20 0.000 0.000
21 0.000 0.000
22 0.000 0.000
23 0.255 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 16554209 17740898 0 0 13 13 147026 17593846 0 0 269
2 3734361 238045 0 0 0 0 147239 90806 0 0 0
3 10586532 159695 0 0 0 0 147235 12460 0 0 0
4 1610610 157325 0 0 0 0 147224 10101 0 0 11
5 15070140 162253 0 0 26 26 147203 14998 0 0 0
6 2663164 167198 0 0 0 0 147213 8975 11010 0 47
7 3770260 157365 0 0 0 0 147230 10135 0 0 53
8 2733567 159510 0 0 0 0 147232 12278 0 0 1329
9 11962290 4242132 0 0 7 7 147197 4094921 0 0 0
10 10178199 539710 0 0 0 0 147234 392476 0 0 0
11 1325094 159566 0 0 0 0 147225 12341 0 0 0
12 2646658 156577 0 0 0 0 147230 9347 0 0 0
13 9431851 553540 0 0 0 0 147226 406314 0 0 0
14 11713269 6046015 0 0 6 6 147202 5898801 0 0 1886
15 9547982 159903 0 0 0 0 147225 12678 0 0 0
16 9189286 158739 0 0 0 0 147218 11521 0 0 0
17 12814991 2179220 0 0 26 26 147178 2031990 0 0 0
18 13439977 392095 0 0 1 1 147223 244870 0 0 0
19 14542981 164981 0 0 5 5 147220 17751 0 0 1
20 6034681 157665 0 0 0 0 147229 10436 0 0 1167
21 9567778 190348 0 0 0 0 147234 43114 0 0 405
22 11388041 3044033 0 0 0 0 147237 2896796 0 0 17
23 25281301 157383 0 0 10 10 147122 10241 0 0 11
24 7888298 160125 0 0 0 0 147221 12904 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** Program elapsed time: 16.387s ( 1952.801 blocks/s, 122.050 Mb/s)
|
| Attachment 27: bias1.png
|
|
| Attachment 28: bias2.png
|
|
| Attachment 29: temps.png
|
|
|
465
|
Wed Nov 23 14:50:59 2016 |
Patrick Coleman-Smith | [ Info ] What does the System Wide Clock check mean when it fails. | The System Wide check called "Check Clock Status" reads the status register from the FEE64 units in the system and compares the value of each bit against a template depending if the FEE64 is Master or not.
The bit fields have the following meaning :-
- clkd_ld1_pin. This is the "locked" status of the PLL in clock distribution chip LMK03200 #1. The clocks are used for the Waveform ADCs. ADCs 1 to 4 and FPGA Waveform decode logic.
- clkd_ld2_pin. This is the "locked" status of the PLL in clock distribution chip LMK03200 #2. The clocks are used for the Waveform ADCs. ADCs 5 to 8 and the Master SYNC PLL in the FPGA.
- aq_clock_locked. This is the "locked" status of the PLL in the FPGA. The clock is used for all data aquisition functions. If this isn't true ('1') then the module is not going to work as part of the system.
- sync_locked. This is the "locked" status of the PLL in the FPGA which provides a 200MHz clock to the SYNC pulse alignement logic. This is only used in the Master.
- to 31 read as '0'
The System Wide Check will only report the state of bits 0 to 2 but by opening the "Local Controls" browser window the status value can be seen ( after a reload ) at offset 1.
|
|
464
|
Wed Nov 23 01:47:28 2016 |
TD, CG | Wednesday 23 November | 10.45 DSSSD bias & leakage currents - see attachments 1 & 2
note - significant increase in leakage current (~0.8uA) since previous readings
may be temperature transient or charging effect due to delta electrons due to BigRIPS tuning to F11
15cm Pb installed upstream of AIDA+BRIKEN some days ago
FEE64 temperatures OK - see attachment 3
15.35 DSSD bias and leakage currents ok (attachments 4+5).
Marginal increase over this morning.
FEE temps ok (attachment 6).
|
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: bias1.png
|
|
| Attachment 5: bias2.png
|
|
| Attachment 6: temps.png
|
|
|
463
|
Tue Nov 22 12:24:48 2016 |
TD | Analysis of R25_11 to R25_23 | Offline analysis of AIDA data files R25_11 to R25_23 using MIDASsort
Note
- no calibration (raw ADC data only)
- no thresholds
- no clustering
- events delimited by > 2us time difference between successive ADC data words
AIDA data files R25_11 to R25_23 inclusive contain 410.3M events
- HEC = high energy channel = 20GeV FSR range for high energy implants
- LEC = low energy channel = 20MeV FSR range for decays (and pulser)
- see attachment 20 *prelimnary* analysis of R25_11 to R25_23 by Tain et al. of 21.11.16
Attachments 1 & 2
-----------------
s1-s24 per FEE64 # ADC data per 20.48us
s101-s124 per FEE64 # disc hits per 20.48us
Pulser event demonstrates that all FEE64s timestamps are synchronised
Attachments 3 & 4
-----------------
s301-s306 per DSSSD LEC rate (Hz) updated every 1s
s307-3312 per DSSSD HEC rate (Hz) updated every 1s
Demonstrates implant and decay rates were reasonably constant.
Note that there is an integerisation issue in the rate calculation which
means rate is shown as zero periodically.
Attachment 5-8
--------------
s2000-s2005 per DSSSD LEC m_lec_p versus m_lec_n
following spectra require 0 < m_lec_p < 8 and 0 < m_lec_n < 8
all combinations of x & y plotted
s2010-s2015 per DSSSD LEC x versus y
s2020-s2025 per DSSSD LEC E_p versus E_n (10keV/ch nominal)
s2030-s2035 per DSSSD LEC-LEC time (2.56us/channel)
Demonstrates large LEC multiplicities associated with HEC events but relatively
low multiplicities associated with LEC-only events .
Minimum LEC-LEC time difference c. 1 x 2.56us = 2.56us which suggests events
with low LEC-LEC time difference are non-stochastic and suggests EMI/RFI noise
causing 'multiple' event bursts. This will likely be dominated by channels
0-1 (say) and 60-63 (say) of each FEE64 - disabling these channels may a quick
and dirty way to inspect a subset of data with significantly less EMI/RFI noise
Time difference between successive LEC events
DSSSD centroid =>rate (kHz)
1 21.16 18.5
2 17.45 22.4
3 40.27 9.70
4 50.86 7.68
5 58.11 6.72
6 29.33 13.3
Which somewhat over-estimates observed rates (see below)
Periodic fine structure observed with period ~4-16 channel (~10-40us)
Attachment 9-13
---------------
s2000-s2005 per DSSSD LEC m_hec_p versus m_hec_n
following spectra require 0 < m_hec_p < 8 and 0 < m_hec_n < 8
all combinations of x & y plotted
s2010-s2015 per DSSSD HEC x versus y (semi-log and linear z normalisation)
s2020-s2025 per DSSSD HEC E_p versus E_n (10MeV/channel nominal)
s2030-s2035 per DSSSD HEC-HEC time (2.56us/channel)
Demonstrates relatively low multiplicities associated with HEC events
HEC x versus y spectra are different to those shown by Tain et al. (p.4)
=> BigRIPS PID gate used?
what is the origin of the fine structure observed by Tain et al. (p.4)?
No obvious structure in the time between successive HEC events
- see also https://elog.ph.ed.ac.uk/AIDA/457
- minimum time between successive HEC events c. 16 x 2.56us = 41us which is
consistent with HEC (+LEC) multiplicity per ASIC and ASIC shaping time (8us)
Note Tain et al. (p.3) plot time between successive events with no restriction on type
(LEC or HEC). The time structure(s) observed may therefore be related to LEC events
Time difference between successive HEC events
DSSSD centroid =>rate (Hz)
1 2566.44 152.0
2 2970.33 131.5
3 2557.81 152.7
4 2622.38 149.0
5 3656.82 106.8
6 15706.73 24.9
Which somewhat over-estimates observed rates (see below)
Attachment 14-16
----------------
s2200-s2205 per pixel, per DSSSD HEC-LEC time (2.56us/channel)
Minimum HEC-LEC time difference c. 15 x 2.56us = 38.4us which is consistent
with ASIC shaping and readout times.
In comparison to Tain et al. (p.9) no obvious structures at large
HEC-LEC time differences. Significant number of excess events observed
at HEC-LEC time differences ~ few hundred us. This is likely due to
the 100kHz EMI/RFI noise observed.
Attachments 17-19
-----------------
MIDASsort Fortran source, spectrum titles, and namelist I/O variables (in this
case principally FEE64 mapping and default ADC gain/offset values).
S O R T C O M P L E T E ..... Tue Nov 22 20:20:10 2016
*** ENTRY finish
*** data items: -900823296 ( -37356.59 Hz)
*** ADC events: 410276049 ( 17013.89 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 56031017 old count: 56019099 dt: 3505.73 s LEC rate: 15982.71 Hz
*** DSSSD # 2 count: 49362481 old count: 49350664 dt: 3505.73 s LEC rate: 14080.52 Hz
*** DSSSD # 3 count: 33599202 old count: 33591614 dt: 3505.73 s LEC rate: 9584.09 Hz
*** DSSSD # 4 count: 26666285 old count: 26660843 dt: 3505.73 s LEC rate: 7606.49 Hz
*** DSSSD # 5 count: 23365594 old count: 23360881 dt: 3505.73 s LEC rate: 6664.98 Hz
*** DSSSD # 6 count: 42705054 old count: 42696091 dt: 3505.73 s LEC rate: 12181.51 Hz
*** DSSSD # 1 count: 469505 old count: 469407 dt: 3505.73 s HEC rate: 133.93 Hz
*** DSSSD # 2 count: 404352 old count: 404269 dt: 3505.73 s HEC rate: 115.34 Hz
*** DSSSD # 3 count: 468569 old count: 468472 dt: 3505.73 s HEC rate: 133.66 Hz
*** DSSSD # 4 count: 455030 old count: 454982 dt: 3505.73 s HEC rate: 129.80 Hz
*** DSSSD # 5 count: 326872 old count: 326863 dt: 3505.73 s HEC rate: 93.24 Hz
*** DSSSD # 6 count: 65691 old count: 65690 dt: 3505.73 s HEC rate: 18.74 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Tue Nov 22 20:21:09 2016 |
| Attachment 1: 100.png
|
|
| Attachment 2: 101.png
|
|
| Attachment 3: 103.png
|
|
| Attachment 4: 104.png
|
|
| Attachment 5: 105.png
|
|
| Attachment 6: 106.png
|
|
| Attachment 7: 107.png
|
|
| Attachment 8: 108.png
|
|
| Attachment 9: 109.png
|
|
| Attachment 10: 110.png
|
|
| Attachment 11: 111.png
|
|
| Attachment 12: 112.png
|
|
| Attachment 13: 113.png
|
|
| Attachment 14: 114.png
|
|
| Attachment 15: 115.png
|
|
| Attachment 16: 116.png
|
|
| Attachment 17: implantdecay.f
|
*trigger
128
*oned
1..32 s 65536
101..132 s 65536
200..201 s 4096
301..332 s 65536
2130..2135 s 65536
2030..2035 s 65536
2200..2205 s 65536
*twod
1000..1001 s 4096 4096
2000..2005 s 128 128
2010..2015 s 128 128
2020..2025 s 512 512
2100..2105 s 128 128
2110..2115 s 128 128
2120..2125 s 512 512
*vars
*sort
C----67---------------------------------------------------------------72------80
SUBROUTINE init
IMPLICIT none
SAVE
C
C External functions
C
EXTERNAL dtime
C
INTEGER and, lshift, rshift, bb18order
C
LOGICAL btest
C
REAL float, secnds
C
C Parameter variables
C
INTEGER max
PARAMETER (max = 4096)
C
C Local variables
C
INTEGER adc_data, asic, ch, channel, channel_ident
INTEGER count, data(0:4095), disc
INTEGER dsssd_a( 6 ), dsssd_b( 6 ), dsssd_c( 6 ), dsssd_d( 6 )
INTEGER*8 dt
INTEGER events, events_old
INTEGER*8 e_time, e_time_old
INTEGER i
INTEGER*2 i2(2), i2_2(4)
INTEGER i4, i4_2(2)
INTEGER*8 i8, first_ts_value
INTEGER idata(0:4095), ierr, information, information_index
INTEGER invalid_id, items, items_old, j, j1, j1_old, j2, j2_old, k
INTEGER l, mbs_data(0:3), module, m_disc, m_p, m_n, ptr
INTEGER sc_channel
INTEGER scaler( 32 ), scaler_old( 32 ), range, time_warp, total
INTEGER*8 ts
INTEGER ts28
INTEGER ts48
INTEGER*8 old_ts( 8, 2 ), ts_old
INTEGER*8 implant_ts( 0:127, 0:127, 1:8 )
INTEGER*8 decay_ts( 0:127, 0:127, 1:8 )
INTEGER type, w(0:31), zzz
C
LOGICAL first, first_ts, hit(0:4095), ihit(0:4095)
REAL c(0:7), delta_t, gain(0:max-1), offset(0:max-1)
REAL t1, t2, t2_old
DOUBLE PRECISION rates( 32 ), t3, t4, t4_old
C----67---------------------------------------------------------------72------80
C
C Namelists
C
NAMELIST /variables/ gain, offset, c, w,
+ dsssd_a, dsssd_b, dsssd_c, dsssd_d
C----67---------------------------------------------------------------72------80
C
C Common variables
C
INTEGER*2 gdata(0:15)
C
COMMON /fdata/ gdata
C
C Common variables
C
INTEGER*2 gid(0:15)
C
COMMON /fid/ gid
C
C Common variables
C
INTEGER mult
C
COMMON /fmult/ mult
C
EQUIVALENCE ( i8, i4_2(1) )
EQUIVALENCE ( i4, i2(1) )
C
C----67---------------------------------------------------------------72------80
WRITE ( 6, * ) ' *** AIDA @ RIKEN - implants - November 2016'
WRITE ( 6, * ) ' *** Entry init commences'
C Initialise counters
events = 0
events_old = 0
time_warp = 0
invalid_id = 0
first_ts = .TRUE.
t3 = 0.0D+00
t4 = 0.0D+00
t4_old = 0.0D+00
C Initialise event data
DO i = 0, 4095
data( i ) = 0
hit( i ) = .FALSE.
ENDDO
first = .true.
ts_old = 0
e_time_old = 0
count = 0
total = 0
DO i = 0, 127
gain( i ) = 1.0
offset( i ) = 0.0
ENDDO
DO i = 0, 31
w( i ) = 0
ENDDO
DO i = 0, 7
c( i ) = 1.0
ENDDO
DO i = 1, 32
scaler( i ) = 0
scaler_old( i ) = 0
rates( i ) = 0.0
ENDDO
DO i = 1, 6
DO j = 1, 2
old_ts( i, j ) = 0
ENDDO
ENDDO
C Initialise time
t1 = SECNDS(0.0)
C Read program variables via NAMELIST I/O
OPEN( 1, FILE = '/homes/npg/td/GREAT/variables.dat',
+ IOSTAT = ierr )
IF ( ierr.NE.0 ) THEN
WRITE( 6, * ) ' *** OPEN I/O error:', ierr
RETURN
ENDIF
READ( 1, NML = variables, IOSTAT = ierr )
IF ( ierr.NE.0 ) THEN
WRITE( 6, * ) ' *** READ I/O error:', ierr
ENDIF
CLOSE( 1, IOSTAT = ierr )
IF ( ierr.NE.0 ) THEN
WRITE( 6, * ) ' *** CLOSE I/O error:', ierr
RETURN
ENDIF
C Display program variables
DO i = 0, 4095, 8
WRITE( 6, 9001 ) i, i+7, ( gain( j ), j = i, i+7 )
ENDDO
DO i = 0, 4095, 8
WRITE( 6, 9002 ) i, i+7, ( offset( j ), j = i, i+7 )
ENDDO
DO i = 0, 7, 8
WRITE( 6, 9003 ) i, i+7, ( c(j), j = 1, 8 )
ENDDO
DO i = 0, 31, 8
WRITE( 6, 9004 ) i, i+7, ( w(j), j = i, i+7 )
ENDDO
DO i = 1, 6
WRITE( 6, 9005 ) i, dsssd_a(i), dsssd_b(i),
+ dsssd_c(i), dsssd_d(i)
ENDDO
WRITE ( 6, * ) ' *** Entry init ends'
RETURN
C----67---------------------------------------------------------------72------80
ENTRY sortin
items = items + 1
IF ( MOD( items, 10000000 ).EQ.0 ) THEN
t2 = SECNDS( t1 )
delta_t = t2 - t2_old
WRITE( 6, 9010 ) items, FLOAT( items - items_old ) / delta_t,
+ events, FLOAT( events - events_old ) / delta_t
items_old = items
events_old = events
t2_old = t2
ENDIF
IF ( MOD( items, 50000 ).EQ.0 ) THEN
t4 = DFLOAT( ts ) * 10.0D-9 - t3
delta_t = t4 - t4_old
IF ( delta_t.GE.1.0D+00 ) THEN
DO i = 1, 32
rates( i ) = DFLOAT( scaler( i ) - scaler_old( i ) ) / delta_t
ENDDO
WRITE( 6, * ) ' '
DO i = 1, 6
WRITE( 6, 9020 ) i, scaler( i ), scaler_old( i ),
+ delta_t, rates( i )
sc_channel = INT ( MOD( t4, 65536.0 ) + 0.5 )
CALL set1d( i+300, sc_channel, INT( rates( i ) + 0.5 ) )
ENDDO
DO i = 7, 12
WRITE( 6, 9030 ) i-6, scaler( i ), scaler_old( i ),
+ delta_t, rates( i )
sc_channel = INT ( MOD( t4, 65536.0 ) + 0.5 )
CALL set1d( i+300, sc_channel, INT( rates( i ) + 0.5 ) )
ENDDO
DO i = 1, 32
scaler_old( i ) = scaler( i )
ENDDO
t4_old = t4
ENDIF
ENDIF
C----67---------------------------------------------------------------72------80
C Event data
C For Linux/x64 & Windows/x86 least significant 16-bit word i2(1)
C For Solaris/SPARC least significant 16-bit word i2(2)
C GREAT 3.2.1 format
C
C Other information
C gid[0]=-1
C gdata[0]=module number
C gdata[1]=information type (2=Pause, 3=Resume, 4=SYNC100, 6=FEE64 disc etc)
C gdata[2]=information field (bits 16-19)
C gdata[3]=information field (bits 0-15)
C gdata[4]=time stamp (bits 16-27)
C gdata[5]=time stamp (bits 0-15)
C
C ADC data format
C
C gid[0]=channel ident (FEE64 module bits 6-11, channel bits 0-5)
C gdata[0]=fail/veto bits (AIDA: fail=0, veto=0 LEC/MEC, veto=1 HEC)
C gdata[1]=?
C gdata[2]=ADC data
C gdata[3]=time stamp (bits 16-27)
C gdata[4]=time stamp (bits 0-15)
C----67---------------------------------------------------------------72------80
C gid = - 1 Other information
IF ( gid(0).EQ.-1 ) THEN
i2(2) = 0
i2(1) = gdata(0)
module = AND( i4, Z'0000003f' )
i2(1) = gdata(1)
type = AND( i4, Z'0000000f' )
i2(2) = gdata(2)
i2(1) = gdata(3)
information = AND( i4, Z'000fffff' )
i2(2) = gdata(4)
i2(1) = gdata(5)
ts28 = AND( i4, Z'0fffffff' )
IF ( type.EQ.2 ) THEN
... 874 more lines ...
|
| Attachment 18: titles.dat
|
s1 nnaida1: ADC data items (20us/ch)
s2 nnaida2: ADC data items (20us/ch)
s3 nnaida3: ADC data items (20us/ch)
s4 nnaida4: ADC data items (20us/ch)
s5 nnaida5: ADC data items (20us/ch)
s6 nnaida6: ADC data items (20us/ch)
s7 nnaida7: ADC data items (20us/ch)
s8 nnaida8: ADC data items (20us/ch)
s9 nnaida9: ADC data items (20us/ch)
s10 nnaida10: ADC data items (20us/ch)
s11 nnaida11: ADC data items (20us/ch)
s12 nnaida12: ADC data items (20us/ch)
s13 nnaida13: ADC data items (20us/ch)
s14 nnaida14: ADC data items (20us/ch)
s15 nnaida15: ADC data items (20us/ch)
s16 nnaida16: ADC data items (20us/ch)
s17 nnaida17: ADC data items (20us/ch)
s18 nnaida18: ADC data items (20us/ch)
s19 nnaida19: ADC data items (20us/ch)
s20 nnaida20: ADC data items (20us/ch)
s21 nnaida21: ADC data items (20us/ch)
s22 nnaida22: ADC data items (20us/ch)
s23 nnaida23: ADC data items (20us/ch)
s24 nnaida24: ADC data items (20us/ch)
s25 nnaida25: ADC data items (20us/ch)
s26 nnaida26: ADC data items (20us/ch)
s27 nnaida27: ADC data items (20us/ch)
s28 nnaida28: ADC data items (20us/ch)
s29 nnaida29: ADC data items (20us/ch)
s30 nnaida30: ADC data items (20us/ch)
s31 nnaida31: ADC data items (20us/ch)
s32 nnaida32: ADC data items (20us/ch)
s101 nnaida1: Disc data items (20us/ch)
s102 nnaida2: Disc data items (20us/ch)
s103 nnaida3: Disc data items (20us/ch)
s104 nnaida4: Disc data items (20us/ch)
s105 nnaida5: Disc data items (20us/ch)
s106 nnaida6: Disc data items (20us/ch)
s107 nnaida7: Disc data items (20us/ch)
s108 nnaida8: Disc data items (20us/ch)
s109 nnaida9: Disc data items (20us/ch)
s110 nnaida10: Disc data items (20us/ch)
s111 nnaida11: Disc data items (20us/ch)
s112 nnaida12: Disc data items (20us/ch)
s113 nnaida13: Disc data items (20us/ch)
s114 nnaida14: Disc data items (20us/ch)
s115 nnaida15: Disc data items (20us/ch)
s116 nnaida16: Disc data items (20us/ch)
s117 nnaida17: Disc data items (20us/ch)
s118 nnaida18: Disc data items (20us/ch)
s119 nnaida19: Disc data items (20us/ch)
s120 nnaida20: Disc data items (20us/ch)
s121 nnaida21: Disc data items (20us/ch)
s122 nnaida22: Disc data items (20us/ch)
s123 nnaida23: Disc data items (20us/ch)
s124 nnaida24: Disc data items (20us/ch)
s125 nnaida25: Disc data items (20us/ch)
s126 nnaida26: Disc data items (20us/ch)
s127 nnaida27: Disc data items (20us/ch)
s128 nnaida28: Disc data items (20us/ch)
s129 nnaida29: Disc data items (20us/ch)
s130 nnaida30: Disc data items (20us/ch)
s131 nnaida31: Disc data items (20us/ch)
s132 nnaida32: Disc data items (20us/ch)
s200 LEC & HEC channels (DSSSD order)
s201 LEC & HEC channels (ASIC order)
s301 DSSSD #1 LEC rate (Hz) versus time
s306 DSSSD #6 LEC rate (Hz) versus time
s307 DSSSD #1 HEC rate (Hz) versus time
s312 DSSSD #6 HEC rate (Hz) versus time
s1000 4*(module # - 1) + asic # (0-95 ADC; 100-195 Disc) v. timestamp (20us/ch)
s1001 HEC channel (2048-3584) versus energy
s2000 m_p versus m_n DSSSD #1 (LEC)
s2005 m_p versus m_n DSSSD #6 (LEC)
s2010 x versus y DSSSD #1 (LEC)
s2015 x versus y DSSSD #6 (LEC)
s2020 E_p versus E_n DSSSD #1 (LEC)
s2025 E_p versus E_n DSSSD #6 (LEC)
s2030 LEC-LEC time DSSSD #1 (2.56us/ch)
s2035 LEC-LEC time DSSSD #6 (2.56us/ch)
s2100 m_p versus m_n DSSSD #1 (HEC)
s2105 m_p versus m_n DSSSD #6 (HEC)
s2110 x versus y DSSSD #1 (HEC)
s2115 x versus y DSSSD #6 (HEC)
s2120 E_p versus E_n DSSSD #1 (HEC)
s2125 E_p versus E_n DSSSD #6 (HEC)
s2130 HEC-HEC time DSSSD #1 (2.56us/ch)
s2135 HEC-HEC time DSSSD #6 (2.56us/ch)
s2200 per pixel HEC-LEC time DSSSD #1 (2.56us/ch)
s2205 per pixel HEC-LEC time DSSSD #6 (2.56us/ch)
|
| Attachment 19: variables.dat
|
$variables
dsssd_a( 1 ) = 17
dsssd_a( 2 ) = 18
dsssd_a( 3 ) = 9
dsssd_a( 4 ) = 10
dsssd_a( 5 ) = 1
dsssd_a( 6 ) = 2
dsssd_b( 1 ) = 20
dsssd_b( 2 ) = 19
dsssd_b( 3 ) = 12
dsssd_b( 4 ) = 11
dsssd_b( 5 ) = 4
dsssd_b( 6 ) = 3
dsssd_c( 1 ) = 22
dsssd_c( 2 ) = 21
dsssd_c( 3 ) = 14
dsssd_c( 4 ) = 13
dsssd_c( 5 ) = 6
dsssd_c( 6 ) = 5
dsssd_d( 1 ) = 23
dsssd_d( 2 ) = 24
dsssd_d( 3 ) = 15
dsssd_d( 4 ) = 16
dsssd_d( 5 ) = 7
dsssd_d( 6 ) = 8
offset = 4096*0.0
gain = 4096*1.0
c = 8*1.0
w = 32*0
$[end]
|
| Attachment 20: anatrees.pdf
|
|
|
462
|
Mon Nov 21 21:22:04 2016 |
TD | Tuesday 22 November | 05.59 M7.3 Fukushima-ken Oki (locally 4) http://www.jma.go.jp/en/quake/20161122060517493-220559.html
06.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
06.28 AIDA to safe mode (FEE64 power OFF, DSSSD bis OFF) until working hours
13.34 Power up FEE64s and bias DSSSDs
N.B. c. 5 min difference between first and last FEE64 remote filesystem mount
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.8 (10.1.2.250) from 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.6 (10.1.1.250) from 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.4 (10.1.2.250) from 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.7 (10.1.2.250) from 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.5 (10.1.1.250) from 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.17 (10.1.1.250) from 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.8:757 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida8 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.6:771 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida6 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.4:757 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida4 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.7:882 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida7 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.5:774 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida5 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.17:1005 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida17 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.10 (10.1.1.250) from 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.9 (10.1.1.250) from 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.12 (10.1.2.250) from 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.11 (10.1.2.250) from 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.16 (10.1.2.250) from 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.15 (10.1.2.250) from 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.14 (10.1.1.250) from 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.13 (10.1.1.250) from 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.10:919 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida10 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.9:678 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida9 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.12:913 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida12 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.11:763 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida11 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.16:860 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida16 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.15:965 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.14:931 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida14 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.13:858 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida13 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:24 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPOFFER on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPREQUEST for 10.1.2.19 (10.1.2.250) from 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPACK on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.19:967 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida19 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.1 (10.1.1.250) from 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.20 (10.1.2.250) from 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.22 (10.1.1.250) from 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.23 (10.1.2.250) from 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.24 (10.1.2.250) from 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.21 (10.1.1.250) from 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.1:676 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida1 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.20:890 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.22:725 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida22 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.23:995 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida23 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.24:813 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida24 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.21:932 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida21 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: new high speed USB device number 54 using ehci_hcd
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: New USB device found, idVendor=090c, idProduct=1000
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: Product: Silicon-Power
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: Manufacturer: UFD 2.0
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: SerialNumber: 1500592402400008
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: configuration #1 chosen from 1 choice
Nov 22 13:34:49 aidas1 kernel: scsi12 : SCSI emulation for USB Mass Storage devices
Nov 22 13:34:50 aidas1 kernel: scsi 12:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G 1100 PQ: 0 ANSI: 0 CCS
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: Attached scsi generic sg8 type 0
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] 31461376 512-byte logical blocks: (16.1 GB/15.0 GiB)
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Write Protect is off
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sdh: sdh1
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Attached SCSI removable disk
Nov 22 13:35:22 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPOFFER on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPREQUEST for 10.1.1.18 (10.1.1.250) from 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPACK on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:23 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.18:1006 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida18 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:35:40 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:52 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:52 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:54 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:54 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:57 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.13:865 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:59 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:59 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:36:49 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:38:00 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPOFFER on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPREQUEST for 10.1.1.2 (10.1.1.250) from 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPACK on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.2:728 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:38:28 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:38:47 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPOFFER on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPREQUEST for 10.1.2.3 (10.1.2.250) from 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPACK on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.3:736 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida3 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:39:14 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)
13.55 DSSSD bias and leakage currents OK - see attachments 4 & 5
FEE64 temperatures OK - see attachment 6
14.30 Ambient temperature +24.8 deg C, d.p. +8.0 deg C, RH 34.5% |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 11.png
|
|
| Attachment 5: 12.png
|
|
| Attachment 6: 13.png
|
|
|
461
|
Mon Nov 21 02:12:45 2016 |
CG & TD | Monday 21 November |
11.10 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
Rate, HitRate, per FEE64 1.8.L and 1.8.W spectra - see attachments 4-9
16.10 DSSD bias and leakage currents ok (attachments 10+11).
FEE temps ok. |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 11.png
|
|
| Attachment 5: 12.png
|
|
| Attachment 6: 13.png
|
|
| Attachment 7: 14.png
|
|
| Attachment 8: 17.png
|
|
| Attachment 9: 18.png
|
|
| Attachment 10: AIDA_leakage_current(4).xlsx
|
| Attachment 11: bias1.png
|
|
| Attachment 12: bias2.png
|
|
|
460
|
Sun Nov 20 02:24:53 2016 |
CG | Sunday 20 November | 11.20 FEE temps and bias leakages ok (attachments 1-3).
However, stats screen shows no SYNCs being issued and no "Good Events" (attachment 4).
Stop and Go had no effect -> SYNCs output but SYNC related system checks failed (attachment 5+6).
Carried out Reset and Setup and returned to normal operation.
17.20 FEE temps and bias leakage currents ok (attachments 7+8).
DAQ still running ok.
BigRIPS tuning through ZDS for next expt.
15cm Pb upstream of BRIKEN. |
| Attachment 1: bias1.png
|
|
| Attachment 2: bias2.png
|
|
| Attachment 3: temps.png
|
|
| Attachment 4: DAQstop_sync.png
|
|
| Attachment 5: syncs_received.png
|
|
| Attachment 6: sync_errors.png
|
|
| Attachment 7: bias1.png
|
|
| Attachment 8: bias2.png
|
|
|
459
|
Sat Nov 19 02:46:09 2016 |
TD, CG | Saturday 19 November |
11.45 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
Updated copy of GoogleDocs leakage current spreadsheet - attachment 4
20:17 DSSD bias and leakage currents ok (attachments 4+5).
FEE temps ok (attachment 6) |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: AIDA_leakage_current(3).xlsx
|
| Attachment 5: bias1.png
|
|
| Attachment 6: bias2.png
|
|
| Attachment 7: temps.png
|
|
|
458
|
Sat Nov 19 02:43:39 2016 |
TD | Thursday 17 November |
10.15 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachments 3 & 4 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
|
457
|
Wed Nov 16 06:47:02 2016 |
TD | Analysis of data files R25_11 to _13 | Offline analysis of R25_11 to _13 see http://ribf-exp.riken.jp/elog/RIBF123/141
"F5 C target F7 no F11 C 6mm
Date 2016/11/10
Start time: 08:20
DLT File: 161110_0820_767778Ni_035.dlt
RUN: 035
Aida RUN: R25_11
Comment: F11 Degraders taken out after few minutes
Degrader: no
Rates:
F11R: 450 Hz
BRIKEN: 200 Hz
Stop time: 09:18
AIDA run: R25_23
ROOT file: 161110_0918_767778Ni_035.root"
Attachments 1-3 show spectra s2130-s2135 over different ranges
s2130 DSSSD #1 time between successive HEC events (2.56us/channel)
:
:
s2135 DSSSD #6 time between successive HEC events (2.56us/channel)
Attachment 4
s2000-s2005 DSSSD #1-6 LEC m_p versus m_n
Attachment 5
s2100-s2105 DSSSD #1-6 HEC m_p versus m_n
HEC events for each DSSSD are defined as m_p_hec > 0 and m_n_hec > 0
Minimum time between HEC events = 16 channels = 40.96us
Centroid channels 0-65525 of spectrum s2130 = ch 2566.44 => 0.00657s -> 152Hz
which agrees well with the typical DSSSD #1 rate for these data files
Is there structure at channel 30 => 76.8us ? More likely it shows variations
in readout time from HEC event to HEC event. |
| Attachment 1: 1001.png
|
|
| Attachment 2: 1002.png
|
|
| Attachment 3: 1000.png
|
|
| Attachment 4: 1003.png
|
|
| Attachment 5: 1004.png
|
|
|
456
|
Wed Nov 16 03:13:25 2016 |
CG | Wednesday 16 November | 11.30 Leakage currents and FEE temps ok (attachments 1-3) |
| Attachment 1: bias1.png
|
|
| Attachment 2: bias2.png
|
|
| Attachment 3: temps.png
|
|
|
455
|
Tue Nov 15 02:22:25 2016 |
TD | Tuesday 15 November | 11.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
11.58 per FEE64 1.8.W spectra - see attachments 4 & 5
14.25 Ambient temperature +24.7 deg C, d.p. +9.0 deg C, RH 36.7%
DSSSD bias & leakage currents OK - see attachments 6 & 7 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 7.png
|
|
| Attachment 5: 8.png
|
|
| Attachment 6: 9.png
|
|
| Attachment 7: 10.png
|
|
|
454
|
Mon Nov 14 05:51:36 2016 |
TD | Monday 14 November |
14.51 DSSSD bias & leakage currents OK - see attachments 1 & 2
Ambient temperature +24.8 deg C, d.p. +7.2 deg C, RH 32.6%
FEE64 temperatures OK - see attachment 3
|
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
|
453
|
Sat Nov 12 01:45:00 2016 |
TD | Saturday 12 November | 10.45 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
14.45 DSSSD bias & leakage currents OK - see attachments 4 & 5
15.10 Download .xlsx file of AIDA leakage currents etc from
https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=1357176413
- see attachment 6 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: AIDA_leakage_current.xlsx
|
|
452
|
Fri Nov 11 00:50:00 2016 |
TD | Friday 11 November | 10.00 DAQ continues (R33) in no storage mode
DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
System wide checks OK *except* clock status - see attachments 4 & 5
Merge statistics - see attachments 6-11
10.21 Ambient temperature +24.9 deg C, d.p. +1.4 deg C, RH 21.5%
|
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: 6.png
|
|
| Attachment 7: 7.png
|
|
| Attachment 8: 8.png
|
|
| Attachment 9: 9.png
|
|
| Attachment 10: 10.png
|
|
| Attachment 11: 11.png
|
|
|
451
|
Thu Nov 10 12:02:24 2016 |
TD, OH, CG | Thursday 10 November |
21.17 DAQ starts (R30)
Pulser walkthrough
Amplitude 90,000 - 10,000 @ 10,000 step
x5 attenuator IN
t_r 50ns tau_d 50us
polarity -, tail pulse, delay MIN
frequency 250Hz range
21.30 DAQ stops OK
21.32 DAQ starts (R31)
Pulser walkthrough
Amplitude 10,000 - 2,000 @ 2,000 step
21.40 DAQ stops OK
21.44 DAQ starts (R32)
Background
BNC PB-4 pulser OFF
21.59 DAQ stops OK
23.45 Started R35 so Jorge can do some tests.
No storage mode.
00.20 Carried out manual fill on LN2 in advance of beam arriving later (~03.00).
Took around 20mins.
Continued writing to R35 after soft reset of DAQ. |
| Attachment 1: 30.png
|
|
| Attachment 2: 31.png
|
|
| Attachment 3: 32.png
|
|
| Attachment 4: 34.png
|
|
|
450
|
Thu Nov 10 11:57:35 2016 |
TD | Data directory NP1412 renamed as RIBF123R1 |
Data directory NP1412 renamed as RIBF123R1
... there are several NP1412 'experiments' in the current schedule ... 1412 may be a date |
|
449
|
Thu Nov 10 09:56:20 2016 |
TD, OH, ML | NP1412 R26 R27 | start 18.55 10.11.16
stop
AIDA filename R26_0
BRIKEN filename 161109_1852_767778Ni_045
BigRIPS filename 443
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents OK attachments 1 and 2
Degrader all degraders out
F11 rate 430Hz
BigRIPS setting 767778Ni F5 out, F7 CH2 in, F11 6mm C in
From offline analysis of R26_2
*** DSSSD # 1 count: 459 old count: 225 dt: 1.02 s HEC rate: 229.83 Hz
*** DSSSD # 2 count: 385 old count: 191 dt: 1.02 s HEC rate: 190.54 Hz
*** DSSSD # 3 count: 461 old count: 228 dt: 1.02 s HEC rate: 228.85 Hz
*** DSSSD # 4 count: 403 old count: 197 dt: 1.02 s HEC rate: 202.33 Hz
*** DSSSD # 5 count: 218 old count: 121 dt: 1.02 s HEC rate: 95.27 Hz
*** DSSSD # 6 count: 87 old count: 42 dt: 1.02 s HEC rate: 44.20 Hz
19.02 FEE64 temperature OK - see attachment 3
19.16 BRIKEN DAQ problems following restart - multiple correlation scaler reset requests issued - ignore data
before R26_5
New BRIKEN data file 161109_1852_767778Ni_046
19.20 AIDA DAQ stalled (presumably *end* of LN2 fill cycle)
Soft reset OK
Clock lock state status 0xd - see attachment 6
19.29 Start DAQ (R27)
19.35 BRIKEN DAQ problems starting SyncCheck program - - multiple correlation scaler reset requests issued -
ignore data before R27_2
19.37 All degraders (5.4mm Al) in for new Takechi et al. setting
BigRIPS setting 767778Ni F5 in, F7 out, F11 6mm C in
BRIKEN filename 161109_1852_767778Ni_045
AIDA fileame R27_3
BigRIPS filename 444
19.40 All degraders out
DSSSD bias & leakage currents OK attachments 4 & 5
From offline analysis of R27_4
*** DSSSD # 1 count: 281 old count: 247 dt: 2.31 s HEC rate: 121.43 Hz
*** DSSSD # 2 count: 247 old count: 219 dt: 2.31 s HEC rate: 106.74 Hz
*** DSSSD # 3 count: 286 old count: 252 dt: 2.31 s HEC rate: 123.59 Hz
*** DSSSD # 4 count: 287 old count: 253 dt: 2.31 s HEC rate: 124.02 Hz
*** DSSSD # 5 count: 201 old count: 178 dt: 2.31 s HEC rate: 86.86 Hz
*** DSSSD # 6 count: 33 old count: 29 dt: 2.31 s HEC rate: 14.26 Hz
20.36 Noted x4 increase in F11 rate to c. 2kHz
All degraders in (5.4mm Al)
BRIKEN DAQ shows x4-5 increase for c. 6 minutes
DSSSD bias & leakage currents OK attachments 7 & 8 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 10.png
|
|
| Attachment 5: 11.png
|
|
| Attachment 6: 4.png
|
|
| Attachment 7: 20.png
|
|
| Attachment 8: 21.png
|
|
|