| ID |
Date |
Author |
Subject |
|
338
|
Fri Aug 19 09:43:27 2016 |
TD, VP, reply PJCS | Friday 19 August | >
> 14.00 Both AIDA NIM bins U/S
> Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
> Lower NIM bin - 11x MACB - not powering up
>
> Replaced both NIM bins.
> Upper NIM bin - 11x MACB
> Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
>
> 15.50 Julabo FL11006 chiller ON - set point +20 deg C
> B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
>
> Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
>
> 16.10 Startup DAQ nnaida1-24 *except* nnaida19
>
> System-wide checks
>
> Check clock status OK
> Check ADC calibration - nnaida7 failed
> Check ASIC clock timestamp - multiple failures - see attachment 3
> Check SYNC errors not counted Since Baseline - see attachment 4
> Check SYNC pulses received - see attachment 5
>
> BNC PB-4
>
> Amplitude 90,000, x5 attenuator IN
> t_r 50ns, tau_d 50us
> Polarity -
> INT ref, delay MIN, tail pulse
>
> FEE64 temperatures - see attachment 6
>
> 16.34 R1 starts (directory Aug2016)
>
> slow comparator 0x10, LEC/MEC fast comparator 0x10
>
> merge 555k data items/s, tapeserver 4430 kb/s
Looks like a problem with the inter-MACB wiring.
The screen shots show groups of 4 with the problems.
I suggest re-seating the short HDMI cables and reset the system. |
|
339
|
Fri Aug 19 11:07:44 2016 |
TD, VP, reply PJCS | Friday 19 August | > >
> > 14.00 Both AIDA NIM bins U/S
> > Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
> > Lower NIM bin - 11x MACB - not powering up
> >
> > Replaced both NIM bins.
> > Upper NIM bin - 11x MACB
> > Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
> >
> > 15.50 Julabo FL11006 chiller ON - set point +20 deg C
> > B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
> >
> > Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
> >
> > 16.10 Startup DAQ nnaida1-24 *except* nnaida19
> >
> > System-wide checks
> >
> > Check clock status OK
> > Check ADC calibration - nnaida7 failed
> > Check ASIC clock timestamp - multiple failures - see attachment 3
> > Check SYNC errors not counted Since Baseline - see attachment 4
> > Check SYNC pulses received - see attachment 5
> >
> > BNC PB-4
> >
> > Amplitude 90,000, x5 attenuator IN
> > t_r 50ns, tau_d 50us
> > Polarity -
> > INT ref, delay MIN, tail pulse
> >
> > FEE64 temperatures - see attachment 6
> >
> > 16.34 R1 starts (directory Aug2016)
> >
> > slow comparator 0x10, LEC/MEC fast comparator 0x10
> >
> > merge 555k data items/s, tapeserver 4430 kb/s
> Looks like a problem with the inter-MACB wiring.
> The screen shots show groups of 4 with the problems.
> I suggest re-seating the short HDMI cables and reset the system.
Short HDMI cables re-seated. See attachment 1 |
| Attachment 1: 7.png
|
|
|
340
|
Fri Aug 19 12:41:43 2016 |
TD, VP, reply PJCS | Friday 19 August | > > >
> > > 14.00 Both AIDA NIM bins U/S
> > > Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
> > > Lower NIM bin - 11x MACB - not powering up
> > >
> > > Replaced both NIM bins.
> > > Upper NIM bin - 11x MACB
> > > Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
> > >
> > > 15.50 Julabo FL11006 chiller ON - set point +20 deg C
> > > B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
> > >
> > > Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
> > >
> > > 16.10 Startup DAQ nnaida1-24 *except* nnaida19
> > >
> > > System-wide checks
> > >
> > > Check clock status OK
> > > Check ADC calibration - nnaida7 failed
> > > Check ASIC clock timestamp - multiple failures - see attachment 3
> > > Check SYNC errors not counted Since Baseline - see attachment 4
> > > Check SYNC pulses received - see attachment 5
> > >
> > > BNC PB-4
> > >
> > > Amplitude 90,000, x5 attenuator IN
> > > t_r 50ns, tau_d 50us
> > > Polarity -
> > > INT ref, delay MIN, tail pulse
> > >
> > > FEE64 temperatures - see attachment 6
> > >
> > > 16.34 R1 starts (directory Aug2016)
> > >
> > > slow comparator 0x10, LEC/MEC fast comparator 0x10
> > >
> > > merge 555k data items/s, tapeserver 4430 kb/s
> > Looks like a problem with the inter-MACB wiring.
> > The screen shots show groups of 4 with the problems.
> > I suggest re-seating the short HDMI cables and reset the system.
>
> Short HDMI cables re-seated. See attachment 1
ok, the discrepancy is odd. Not sure if it is due to an uneven reset or more noise in the wiring.
In system wide checks redo the baseline for the SYNC error counters and keep an eye on it.
Maybe a power cycle will bring all the SYNC received counters into line.
Certainly they should be exactly the same.
Is there any correlation between the ones that are wrong and the MACB layout/cabling ? |
|
529
|
Tue Dec 6 06:38:46 2016 |
TD, Updated Patrick | CAEN N1419 HV output common mode noise |
There appears to be significant common mode noise on the output of the
CAEN N1419 4 Ch Reversible 500 V/200 µA NIM HV Power Supply Module (USB)
- the specification quotes 'Max Ripple smaller than < 5mVpp'. We configure
the CAEN N1419 outputs as floating wrt NIM module/crate chassis.
For example, attachment 1, shows the output of module #2 (Addr 01) channel #3
(unused channel) set to 10V (leakage current 0.030uA) - core (Ch 1)/braid (Ch 2).
Tektronix 3034C channels 1 & 2 are both set ac/1M.
Attachment 2 shows math function Ch 1 - Ch 2 (50mV/division cf. 200mV/division
for Ch 1 and Ch 2)
Attachment 3 shows CAEN N1419 #2 settings
Attachment 4 per attachments 1 & 2 *except* the cables from channels 0 and 1
of CAEN N1419 #2 have been disconnected from the NIM module. The structure of
the common mode noise changes but its amplitude remains significant. This
presumably indicates that there are other sources of common mode noise in
addition to that observed at the output of the CAEN N1419 HV outputs.
Attachments 5 & 6 show the NIM crate front panel +6V output wrt ground
for the lower (NIM Bin type REPIC, BNC PB-4, Ortec 433, 2x MACB, 2x CAEN N1419,
1x CAEN 1419B) and upper (NIM Bin type OKEN, 9x MACB) AIDA NIM bins respectively.
All +/-24V, +/-12V and +/-6V front panel outputs show the same noise structure.
Attachment 7 shows equivalent of attachment 6 but using Tektronix DPO3054
which can display FFT.
Update -----------------------------------------
Tested the CAEN HV supply in T9 using the same method and observed similar results.
With help from Mos Kogimtzis a better method of measuring the HV noise was used.
The co-ax from the isolated output of the HV module was connected to one input of the 'scope. HV set to 1V.
Thus the screen of the HV signal is grounded at the 'scope amplifier input. This nearer to how the HV is used with a detector.
The single signal input channel was set to DC 1MR with an offset of 1V.
The 'scope can now display at 4mV/division.
The peak/peak was less than 5mV.See attachment 8 slide 1
There are features at both high and low frequency, attachments slides 2 and 3. NB 1mV/division.
If a differential measurement is required then a suitable cable with a shielded twisted pair is needed.
Update #2 -----------------------------------------
Moved the AIDA T9 HV supply to a CAEN NIM bin. Newly purchased this year.
This is the only module in the bin.
Used the simple method of noise measuring as before with the same cables and 'scope.
Attachment 9 shows there is a different type of noise. Not regular like attachment 8 but more random and larger.
The HV is set to 1V.
Further investigation will be carried out using AC coupling and HV set to 50V. |
| Attachment 1: 200.png
|
|
| Attachment 2: 201.png
|
|
| Attachment 3: 202.png
|
|
| Attachment 4: 203.png
|
|
| Attachment 5: 210.png
|
|
| Attachment 6: 211.png
|
|
| Attachment 7: 220.png
|
|
| Attachment 8: HV_noise.pdf
|
|
| Attachment 9: HV_Noise_Caen_in_Caen.pdf
|
|
|
68
|
Thu Apr 23 09:02:57 2015 |
TD, Patrick | FEE64 Fast Discriminator OR o/p via MACB | > Illustration of the trigger timing of the AIDA FEE64 fast discriminator OR output via the
> MACB front panel Trigger outputs.
>
> Channel 1: BNC PB-4 Pulser Trigger Output
> Channel 2: BNC PB-4 Pulser Analogue Output
> Channel 3: MACB Trigger Output
>
> MACB Trigger Output: NIM complement
> width ~ 7us
> delay ~ 750ns (with respect to BNC PB_4 Pulser Analogue Output)
>
> Example illustrates MAC Trigger Output from nnaida5 with standard ASIC settings and
> LEC/MEC fast discriminator 0x40
It would be useful to show the Trigger signal at the different levels of the MACB distribution system... then
the difference will show the delay through the MACB layer.
Are you able to estimate the length of cable between the pulser and the adaptor boards.
What are the conclusions about the delay .... is it too much to be useful ? |
|
673
|
Mon Jun 19 08:58:00 2017 |
TD, Patrick | Report - high - 'zero all histograms' doesn't | >
> The DAQ Run Control 'zero all histograms' function appears to have stopped working
> - an issue related to the new RunControl/sys.tcl ... ?
>
> See https://elog.ph.ed.ac.uk/AIDA/662
Fault discovered and file edited at Daresbury.
A piece of random text was in the " zero histograms" process.
The repaired file has been installed in RIKEN. |
|
608
|
Mon May 29 00:59:27 2017 |
TD, PV, CB, NN, OH | Monday 29 May | 09.00 DAQ continues OK
Current file May2017/R32_239
Detector biases; leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
good events; statistics OK - see attachment 4
Some error messages reported by merger yesterday but none overnight - see attachment 5
*all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status =6)
09.33 E17/F11 ambient temperature +24.0 deg C, RH 38.0%, d.p. +8.8 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)
09.35 Analysis of R32_259 - OK see attachment 6
10.50 Offline analysis R32_277 - ADC & disc data synchronised - see attachments 7-9
11.00 DAQ stop OK
File May2017/R32_280
Check ASIC control x2
Zero all spectra
11.05 DAQ go
File May2017/R33
BNC PB-4
Amplitude 90,000
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency 25Hz range
delay MIN, tail pulse, INT ref
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0x20
15.00 Merger crashed (SEGV) - see https://elog.ph.ed.ac.uk/AIDA/607
DAQ stop
Restart Merger
DAQ stop OK following transient nnaida1 timeout
Close merger/tapeserver browser, kill httpd for merger/tapeserver,merger and tapeserver terminal server
sessions
Disable histogramming and data transfer #1
DAQ reset, setup
Restart merger and tapeserver
Enable histogramming and data transfer #1
*all* system wide checks OK *except* nnaida1 & nnaida21 fail ADC calibration, nnaida1 clock status=6
15.18 DAQ start
File May2017/R34
15.25 no merger error messages
nnaida1 & nnaida2 good events high - ~100k and ~120k respectively - see attachment 10
16.24 removed R32
System wide checks - ASIC clock timestamp test fails on all nnaidas. Synchronised clocks. ASIC clock test
passes.
FEE temperatures, leakage currents - OK
Merger reports
Merge: Restarting from timestamp 1 or greater
Merge: Starting at timestamp 27d1e55c00a0
Merge: Trying to add items to Q index 21 (Link 21) but queue already full
Probably as a result of ADC clock synchronisation.
17:03 Used analyser on R34_23. No timewarps, negligible dead time. All other values as normal.
17.19 FEE64 temperatures, leakage currents - OK
nnaida1 & nnaida 2 good events still high - ~100k roughly
No further messages from merger
17.45 DAQ continues OK
BRIKEN reports increased neutron and gamma activity. No apparent effect on AIDA rates.
18.50 DAQ continues OK
FEE64 temperatures, leakage currents - OK
No merger errors
Used analyser on run R34_49 - no timewarps, rates as expected
19.30 BigRIPS optimisation ongoing. DAQ continues OK
FEE64 temperatures, leakage currents - OK
No merger error messages
No panics from USB device monitor
Used analyser on R34_58 - no timewarps, ADC data format ~ 1Mhz, other rates OK,
highest dead time = ~2 s/254 s on nnaida 2
20.00 BigRIPS optimisation ongoing. DAQ continues OK
FEE64 temperatures, leakage currents - OK
No merger error messages
No panics from USB device monitor
Used analyser on R34_63 - no timewarps, ADC data format ~ 1Mhz, other rates OK,
highest dead time = ~1.3 s/255 s on nnaida 2
20.15 BigRIPS reports beam optimisation may be over soon.
DAQ continues OK.
20.47 BigRIPS optimisation ongoing. DAQ continues OK
FEE64 temperatures, leakage currents - OK
No merger error messages
No panics from USB device monitor
Used analyser on R34_76 - no timewarps, ADC data format ~ 1Mhz, other rates OK,
highest dead time = ~1.1 s/255 s on nnaida 2
21.49 BigRIPS optimisation ongoing. DAQ continues OK
FEE64 temperatures, leakage currents - OK
No merger error messages
No panics from USB device monitor
Used analyser on R34_90 - no timewarps, ADC data format ~ 1Mhz, other rates OK,
highest dead time = ~2.0 s/258 s on nnaida 2
23.05 BigRIPS optimisation ongoing. DAQ continues OK
FEE64 temperatures, leakage currents - OK
No merger error messages
No panics from USB device monitor
Used analyser on R34_109 - no timewarps, ADC data format ~ 1Mhz, other rates OK,
highest dead time = ~1.9 s/256 s on nnaida 2 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: R32_259
|
*** TDR format 3.3.0 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 258193721 ( 926348.5 Hz)
Other data format: 2894279 ( 10384.1 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 84 ( 0.3 Hz)
RESUME: 84 ( 0.3 Hz)
SYNC100: 2550936 ( 9152.3 Hz)
FEE64 disc: 233790 ( 838.8 Hz)
MBS info: 109385 ( 392.5 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 3405 ( 12.2 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 278.722 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.349 0.136
2 0.125 0.000
3 0.000 0.000
4 0.000 0.000
5 0.048 0.000
6 0.000 0.000
7 0.000 0.000
8 0.000 0.000
9 0.155 0.000
10 0.145 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.001 0.000
15 0.000 0.000
16 0.000 0.000
17 0.123 0.000
18 0.382 0.000
19 0.049 0.000
20 0.000 0.000
21 0.000 0.000
22 0.004 0.000
23 0.028 0.000
24 0.010 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 24166310 115330 0 0 10 10 106183 9127 0 0 238
2 21829349 119893 0 0 4 4 106267 13618 0 0 0
3 8201298 115714 0 0 0 0 106309 9405 0 0 0
4 2026665 113519 0 0 0 0 106310 7209 0 0 53
5 11328404 117954 0 0 16 16 106295 11627 0 0 0
6 1555200 222934 0 0 0 0 106312 7237 109385 0 7
7 3064531 113484 0 0 0 0 106315 7169 0 0 21
8 2396557 115694 0 0 0 0 106307 9387 0 0 182
9 19087639 114054 0 0 6 6 106251 7791 0 0 0
10 21158871 119871 0 0 5 5 106259 13602 0 0 0
11 4618142 115488 0 0 0 0 106313 9175 0 0 0
12 5119593 113434 0 0 0 0 106308 7126 0 0 0
13 8516381 117178 0 0 0 0 106313 10865 0 0 0
14 9884029 114016 0 0 1 1 106311 7703 0 0 864
15 7843269 115863 0 0 0 0 106305 9558 0 0 1
16 7429424 114651 0 0 0 0 106312 8339 0 0 0
17 13649798 115646 0 0 12 12 106264 9358 0 0 3
18 18654367 119620 0 0 15 15 106163 13427 0 0 0
19 13181865 119343 0 0 5 5 106292 13041 0 0 1
20 9350627 114203 0 0 0 0 106309 7894 0 0 1722
21 8911645 120455 0 0 0 0 106311 14144 0 0 307
22 10687802 116186 0 0 2 2 106311 9871 0 0 0
23 13463277 113787 0 0 4 4 106304 7475 0 0 6
24 12068678 115962 0 0 4 4 106312 9642 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** Program elapsed time: 18.391s ( 1740.017 blocks/s, 108.751 Mb/s)
|
| Attachment 7: 6.png
|
|
| Attachment 8: 7.png
|
|
| Attachment 9: 8.png
|
|
| Attachment 10: 10.png
|
|
|
620
|
Thu Jun 1 00:00:25 2017 |
TD, PV, CB | Thusrday 1 June 08.00-16.00 | 07.57 run continues
BRIKEN start run 55
BigRIPS start run 1066
AIDA file RIBF127R1/R1_763
BNC PB-4
Amplitude 90,000
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency 25Hz range
delay MIN, tail pulse, INT ref
ASIC settings 2017Mar27-16.12.39
84Zn BigRIPS setting, 78Ni degrader setting - 5mm (in F7) + 9mm (in F11) + 1mm (in F11) = 16 mm Al
09.01 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_779
09.03 BRIKEN start run 56
BigRIPS start run 1067
AIDA file RIBF127R1/R1_779
09.32 Beam dropped
AIDA file RIBF127R1/R1_786
09.38 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_788
09.43 Beam is back
BRIKEN start run 57
BigRIPS start run 1068
AIDA file RIBF127R1/R1_789
09.55 Beam is off
There will be no beam for 1 hour, accelerator people want to check the ion source.
DAQ stop BigRIPS, BRIKEN
AIDA file R1_792
10.29 Beam is back
BRIKEN start run 58
BigRIPS start run 1069
AIDA file 799
Beam intensity reduced half, then slowly increasing
11.29 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_813
11.29 BRIKEN start run 59
BigRIPS start run 1070
AIDA file RIBF127R1/R1_813
11.32 Sorted file RIBF127R1/R1_811. DSSSD rates are as follows
*** data items: 2431382 ( 108760.05 Hz)
*** ADC events: 260316 ( 11644.40 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 109746 old count: 88603 dt: 2.40 s LEC rate: 45784.75 Hz
*** DSSSD # 2 count: 148624 old count: 119105 dt: 2.40 s LEC rate: 62004.19 Hz
*** DSSSD # 3 count: 50556 old count: 40453 dt: 2.40 s LEC rate: 21091.37 Hz
*** DSSSD # 4 count: 43410 old count: 35484 dt: 2.40 s LEC rate: 18110.14 Hz
*** DSSSD # 5 count: 17933 old count: 14701 dt: 2.40 s LEC rate: 7481.44 Hz
*** DSSSD # 6 count: 36412 old count: 30468 dt: 2.40 s LEC rate: 15190.66 Hz
*** DSSSD # 1 count: 42 old count: 40 dt: 2.40 s HEC rate: 17.52 Hz
*** DSSSD # 2 count: 85 old count: 70 dt: 2.40 s HEC rate: 35.46 Hz
*** DSSSD # 3 count: 85 old count: 76 dt: 2.40 s HEC rate: 35.46 Hz
*** DSSSD # 4 count: 58 old count: 51 dt: 2.40 s HEC rate: 24.20 Hz
*** DSSSD # 5 count: 35 old count: 28 dt: 2.40 s HEC rate: 14.60 Hz
*** DSSSD # 6 count: 7 old count: 6 dt: 2.40 s HEC rate: 2.92 Hz
11.40 Detector biases & leakage currents OK - see attachments 1
FEE64 Temperatures OK - see attachment 2
good events statistics OK - see attachment 3
No new merger error messages - see attachment 4
*all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
all SortSas spectra zero'd
11.45 Analysed RIBF127R1/R1_815 - see attachment 5
No timewarps
Negligible deadtime. No idle time issues.
11.49 System console log ttyUSB7 (nnaida1) attached - see attachment 6
Current HEC hit pattern OK - see attachment 7
12.40 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_829
12.43 BRIKEN start run 60
BigRIPS start run 1071
AIDA file RIBF127R1/R1_830
13.45 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_844
13.46 BRIKEN start run 61
BigRIPS start run 1072
AIDA file RIBF127R1/R1_845
all SortSas online spectra zero'd
x-y hit pattern OK
13:56 System wide checks all ok
Screenshots included for merger, statistics and FEE temperatures - attachments 8-10
14:04 leakages and Biases ok - attachment 11
14.46 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_858
14.47 BRIKEN start run 62
BigRIPS start run 1073
AIDA file RIBF127R1/R1_858
all SortSas online spectra zero'd
14:56 online analysis x-y hit pattern OK - attachment 12
15.46 DAQ stop BigRIPS, BRIKEN
AIDA file RIBF127R1/R1_872
15.47 BRIKEN start run 63
BigRIPS start run 1074
AIDA file RIBF127R1/R1_872
15.57 R1_873.txt checked
No timewarps
Negligible deadtime. No idle time issues.
16.22 Detector biases & leakage currents OK - see attachments 14
No new merger error messages - see attachment 15
FEE64 Temperatures OK - see attachment 16
good events statistics OK - see attachment 17
|
| Attachment 1: 46.bias_current.png
|
|
| Attachment 2: 45.temperature.png
|
|
| Attachment 3: 44.statistics.png
|
|
| Attachment 4: 48.mergerstat.png
|
|
| Attachment 5: analysis.815
|
*** TDR format 3.3.0 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 256510495 ( 991772.3 Hz)
Other data format: 4577505 ( 17698.5 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 97 ( 0.4 Hz)
RESUME: 97 ( 0.4 Hz)
SYNC100: 2366841 ( 9151.2 Hz)
FEE64 disc: 2156491 ( 8337.9 Hz)
MBS info: 53979 ( 208.7 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 256300 ( 991.0 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 258.638 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.309 0.283
2 0.653 0.600
3 0.000 0.000
4 0.000 0.000
5 0.037 0.000
6 0.011 0.000
7 0.000 0.000
8 0.000 0.000
9 0.306 0.000
10 0.092 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.000 0.000
15 0.000 0.000
16 0.000 0.000
17 0.249 0.000
18 0.202 0.000
19 0.041 0.000
20 0.000 0.000
21 0.000 0.000
22 0.031 0.000
23 0.054 0.000
24 0.009 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 23863105 213551 0 0 7 7 98535 115002 0 0 22930
2 26671646 201124 0 0 13 13 98399 102699 0 0 18859
3 7685889 111581 0 0 0 0 98653 12928 0 0 257
4 2022109 122842 0 0 0 0 98652 24190 0 0 1626
5 10324368 115031 0 0 14 14 98635 16368 0 0 482
6 10535388 181261 0 0 4 4 98642 28632 53979 0 3063
7 2836123 133202 0 0 0 0 98650 34552 0 0 3326
8 2034879 113514 0 0 0 0 98651 14863 0 0 535
9 18374439 242794 0 0 10 10 98534 144240 0 0 13931
10 20003037 180032 0 0 3 3 98604 81422 0 0 8418
11 4107837 144103 0 0 0 0 98646 45457 0 0 4631
12 4979065 186442 0 0 0 0 98649 87793 0 0 8493
13 8360349 184191 0 0 0 0 98646 85545 0 0 8877
14 9734616 242049 0 0 0 0 98656 143393 0 0 15937
15 7393917 233625 0 0 0 0 98648 134977 0 0 14603
16 6245783 170966 0 0 0 0 98652 72314 0 0 9263
17 13133414 128745 0 0 18 18 98556 30153 0 0 2259
18 16347131 115952 0 0 9 9 98572 17362 0 0 312
19 12610010 234139 0 0 5 5 98634 135495 0 0 12968
20 8625573 304896 0 0 0 0 98658 206238 0 0 16652
21 8833612 208365 0 0 0 0 98651 109714 0 0 22849
22 10719884 233904 0 0 6 6 98638 135254 0 0 26499
23 11144999 318294 0 0 6 6 98630 219652 0 0 20781
24 9923322 256902 0 0 2 2 98650 158248 0 0 18749
25 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** Program elapsed time: 41.762s ( 766.252 blocks/s, 47.891 Mb/s)
|
| Attachment 6: ttyUSB7
|
executing generic doStop
EXPERIMENTS/AIDA/Options/nnaida1 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
DataAcqCommand 1 Halt
Aida state now Stopped. AidaExecV8_52: Build 170816
Halt (1)
DataAcqCommand 1 disconnect xfer stream #0
disconnect xfer stream #0 (1)
completed generic doStop
executing generic doGo
EXPERIMENTS/AIDA/Options/nnaida1 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
DataAcqCommand 3 connect xfer stream #0
Initialising communication with storage server myserver on port 11001
Setting Transfer Block Size 65536
Setting Transfer Mode 3
Setting Overlap Mode 0
Setting Blocking Mode 0
Setting nice 0
TCP transfer library version 3.12
TCP socket send buffer was 16384 - now 221184
TCP socket receive buffer was 87380 - now 221184
TCP socket created OK - now connecting to myserver port 11001
Connected to myserver port 11001
connect xfer stream #0 (1)
DataAcqCommand 2 Go
Data Acquisition Statistics counters now cleared
ASIC DMA buffer size 2097152; WAVE DMA buffer size 1048576
Aida state now Going. AidaExecV8_52: Build 170816
Go (1)
Running Go_Electronics for nnaida1 with TSMaster nnaida6
ADCs Calibrated.
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
WV:0:Buffer info. Length = 64 : Offset = 0
WV:1:Buffer info. Length = 62 : Offset = 2
WV:2:Buffer info. Length = 60 : Offset = 4
WV:3:Buffer info. Length = 58 : Offset = 6
WV:4:Buffer info. Length = 56 : Offset = 8
WV:5:Buffer info. Length = 54 : Offset = 10
WV:6:Buffer info. Length = 52 : Offset = 12
WV:7:Buffer info. Length = 50 : Offset = 14
WV:8:Buffer info. Length = 48 : Offset = 16
WV:9:Buffer info. Length = 46 : Offset = 18
Finished Go_Electronics for AIDA
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0504
completed generic doGo
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0404
In RDOGo_Operate: Enabled Correlation, ASIC and discriminator readout
executing generic doStop
EXPERIMENTS/AIDA/Options/nnaida1 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
DataAcqCommand 1 Halt
Aida state now Stopped. AidaExecV8_52: Build 170816
Halt (1)
DataAcqCommand 1 disconnect xfer stream #0
disconnect xfer stream #0 (1)
completed generic doStop
Flash base address=FC000000
Set Flash to ASync Mode
XFLASH_PART_NOT_SUPPORTED
Finished copying zImage to RAM
Found 0 errors checking kernel image
VHDL version number 0X01900C1F
Bootloader version number 1.2.7 -- 22nd August 2012
Starting LMK 3200 setup
Setting LMK03200 to standard clock settings -- External Clock 23Nov15
.... SPI Base Address=0x81400000
clk_control_reg=0x4
Next step is SPIconfig
Control 32(0x81400000)=0x180
SlaveSel(0x81400000)=0x3
Ctrl(0x81400000)=0xE6
Ctrl(0x81400000)=0x86
SPIconfig done now to set up the LMK3200 registers
LMK #0 : regInit[0]=0x80000000
LMK #0 : regInit[1]=0x10070600
LMK #0 : regInit[2]=0x60601
LMK #0 : regInit[3]=0x60602
LMK #0 : regInit[4]=0x60603
LMK #0 : regInit[5]=0x70624
LMK #0 : regInit[6]=0x70605
LMK #0 : regInit[7]=0x70606
LMK #0 : regInit[8]=0x70627
LMK #0 : regInit[9]=0x10000908
LMK #0 : regInit[10]=0xA0022A09
LMK #0 : regInit[11]=0x82800B
LMK #0 : regInit[12]=0x28C800D
LMK #0 : regInit[13]=0x830020E
LMK #0 : regInit[14]=0xC800180F
Calibrate completed at 942 counts
Setting Clock Control =0x0000000B, to set GOE and sync bit
Ctrl @ SPIstop (0x81400000)=0x186
0 delay setup completed at 0 counts
Finished Clock setup LMK03200
completed LMK 3200 setup
Loaded all four ASICs with default settings
Setting the ADCs into calibration mode
Control 32(0x81400400)=0x180
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86
Init : Config of AD9252 SPI ok
Ctrl @ SPIstop (0x81400400)=0x186
ADCs initialised
waiting for 10 seconds
ADCs calibrated
Control 32(0x81400400)=0x186
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86Config of AD9252 SPI ok
Ctrl @ SPIstop (0x81400400)=0x186
ADCs set for PN-9
Jumping to kernel simpleboot...
zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0)
Allocating 0x3b78cc bytes for kernel ...
gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes
Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Finalizing device tree... flat tree at 0xbd1300
Probing IIC bus for MAC... MAC address = 0x0 0x4 0xa3 0x2a 0xd0 0x1b
Using Xilinx Virtex440 machine description
Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011
Zone PFN ranges:
DMA 0x00000000 -> 0x00007000
Normal 0x00007000 -> 0x00007000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00007000
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448
Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init)
Kernel virtual memory layout:
* 0xffffe000..0xfffff000 : fixmap
* 0xfde00000..0xfe000000 : consistent mem
* 0xfde00000..0xfde00000 : early ioremap
* 0xd1000000..0xfde00000 : vmalloc & ioremap
NR_IRQS:512
clocksource: timebase mult[a00000] shift[22] registered
Console: colour dummy device 80x25
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 214
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
console [ttyS0] enabled
brd: module loaded
loop: module loaded
Device Tree Probing 'ethernet'
xilinx_lltemac 81c00000.ethernet: MAC address is now 0: 4:a3:2a:d0:1b
xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
XLlTemac: DCR address: 0x80
XLlTemac: buffer descriptor size: 32768 (0x8000)
XLlTemac: Allocating DMA descriptors with kmalloc
XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
XTemac: PHY detected at address 7.
xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17
fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 5 MTD partitions on "fc000000.flash":
0x000000000000-0x000000500000 : "golden_firmware"
0x000000500000-0x000000800000 : "golden_kernel"
0x000000800000-0x000000d00000 : "user_firmware"
0x000000d00000-0x000000fe0000 : "user_kernel"
0x000000fe0000-0x000001000000 : "env_variables"
xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
SPI: XIlinx spi: bus number now 32766
xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
SPI: XIlinx spi: bus number now 32765
mice: PS/2 mouse device common for all mice
Device Tree Probing 'i2c'
#0 at 0x81600000 mapped to 0xD1030000, irq=22
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
eth0: XLlTemac: Options: 0x3fa
eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
eth0: XLlTemac: speed set to 1000Mb/s
eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 10.1.1.250, my address is 10.1.1.1
IP-Config: Complete:
device=eth0, addr=10.1.1.1, mask=255.255.255.0, gw=10.1.1.250,
host=nnaida1, domain=, nis-domain=(none),
bootserver=10.1.1.250, rootserver=10.1.1.250, rootpath=/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida1,tcp
... 4873 more lines ...
|
| Attachment 7: 1.png
|
|
| Attachment 8: 1.mergerstat.png
|
|
| Attachment 9: 2.statistics.png
|
|
| Attachment 10: 3.temperature.png
|
|
| Attachment 11: 010617_bias1403.png
|
|
| Attachment 12: 12.onlinehitxy.png
|
|
| Attachment 13: R1_873.txt
|
*** TDR format 3.3.0 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 256129954 ( 1006120.2 Hz)
Other data format: 4958046 ( 19476.0 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 93 ( 0.4 Hz)
RESUME: 93 ( 0.4 Hz)
SYNC100: 2329339 ( 9150.0 Hz)
FEE64 disc: 2573956 ( 10110.9 Hz)
MBS info: 54565 ( 214.3 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 258704 ( 1016.2 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 254.572 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.607 0.488
2 1.361 1.397
3 0.000 0.000
4 0.000 0.000
5 0.036 0.000
6 0.004 0.000
7 0.000 0.000
8 0.000 0.000
9 0.078 0.000
10 0.105 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.007 0.000
15 0.000 0.000
16 0.000 0.000
17 0.251 0.000
18 0.187 0.052
19 0.113 0.000
20 0.000 0.000
21 0.000 0.000
22 0.013 0.000
23 0.024 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 24074487 219268 0 0 14 14 96872 122368 0 0 24432
2 27250454 592530 0 0 15 15 96582 495918 0 0 20237
3 7563926 110073 0 0 0 0 97100 12973 0 0 229
4 2008136 120561 0 0 0 0 97104 23457 0 0 1535
5 10172382 112920 0 0 12 12 97091 15805 0 0 426
6 10371326 178338 0 0 2 2 97094 26675 54565 0 2765
7 2799928 130298 0 0 0 0 97097 33201 0 0 3131
8 2010117 111262 0 0 0 0 97100 14162 0 0 530
9 18734315 256021 0 0 3 3 97073 158942 0 0 15179
10 20157337 183453 0 0 3 3 97056 86391 0 0 8811
11 4132145 143629 0 0 0 0 97100 46529 0 0 4623
12 4998044 187568 0 0 0 0 97098 90470 0 0 8781
13 8257497 178925 0 0 0 0 97101 81824 0 0 8377
14 9568788 236679 0 0 1 1 97099 139578 0 0 15401
15 7310482 231313 0 0 0 0 97095 134218 0 0 14817
16 6172105 169220 0 0 0 0 97102 72118 0 0 9208
17 13016832 127759 0 0 20 20 97009 30710 0 0 2233
18 16133394 114544 0 0 7 7 97025 17505 0 0 317
19 12571526 234564 0 0 9 9 97057 137489 0 0 13290
20 8656391 311902 0 0 0 0 97100 214802 0 0 17022
21 8748693 203524 0 0 0 0 97099 106425 0 0 21904
22 10571141 227499 0 0 3 3 97095 130398 0 0 25337
23 11017094 318125 0 0 4 4 97089 221028 0 0 21090
24 9833414 258071 0 0 0 0 97101 160970 0 0 19029
25 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** Program elapsed time: 67.070s ( 477.111 blocks/s, 29.819 Mb/s)
|
| Attachment 14: 14.bias_current.png
|
|
| Attachment 15: 15.mergerstat.png
|
|
| Attachment 16: 16.temperature.png
|
|
| Attachment 17: 17.statistics.png
|
|
|
337
|
Fri Aug 19 07:42:22 2016 |
TD, PV | Friday 19 August |
14.00 Both AIDA NIM bins U/S
Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
Lower NIM bin - 11x MACB - not powering up
Replaced both NIM bins.
Upper NIM bin - 11x MACB
Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
15.50 Julabo FL11006 chiller ON - set point +20 deg C
B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
16.10 Startup DAQ nnaida1-24 *except* nnaida19
System-wide checks
Check clock status OK
Check ADC calibration - nnaida7 failed
Check ASIC clock timestamp - multiple failures - see attachment 3
Check SYNC errors not counted Since Baseline - see attachment 4
Check SYNC pulses received - see attachment 5
BNC PB-4
Amplitude 90,000, x5 attenuator IN
t_r 50ns, tau_d 50us
Polarity -
INT ref, delay MIN, tail pulse
FEE64 temperatures - see attachment 6
16.34 R1 starts (directory Aug2016)
slow comparator 0x10, LEC/MEC fast comparator 0x10
merge 555k data items/s, tapeserver 4430 kb/s
18.28 R4 starts
Settings per R1
18.31 DAQ/merge stalls with (many) messages as follows
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
Merge state now Paused
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
copyItems: queue 14, maybe copied in wrong buffer: sequence 1146, last 575
Merge_addItems: queue 14, maybe added wrong buffer: sequence 1146, last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in new data, found 689, last 1258
copyItems: queue 14, maybe copied in wrong buffer: sequence 689, last 1258
Merge_addItems: queue 14, maybe added wrong buffer: sequence 689, last 1258
MERGE Data Link (24254): client closed connection
MERGE Data Link (24254): listening on port 11001
MERGE Data Link (24255): client closed connection
MERGE Data Link (24255): listening on port 11002
MERGE Data Link (24257): client closed connection
MERGE Data Link (24257): listening on port 11004
MERGE Data Link (24258): client closed connection
MERGE Data Link (24258): listening on port 11005
MERGE Data Link (24261): client closed connection
MERGE Data Link (24261): listening on port 11008
MERGE Data Link (24260): client closed connection
MERGE Data Link (24260): listening on port 11007
MERGE Data Link (24259): client closed connection
MERGE Data Link (24259): listening on port 11006
MERGE Data Link (24256): client closed connection
MERGE Data Link (24256): listening on port 11003
MERGE Data Link (24262): client closed connection
MERGE Data Link (24262): listening on port 11009
MERGE Data Link (24263): client closed connection
MERGE Data Link (24263): listening on port 11010
MERGE Data Link (24265): client closed connection
MERGE Data Link (24265): listening on port 11012
MERGE Data Link (24266): client closed connection
MERGE Data Link (24266): listening on port 11013
MERGE Data Link (24267): client closed connection
MERGE Data Link (24267): listening on port 11014
MERGE Data Link (24269): client closed connection
MERGE Data Link (24269): listening on port 11016
MERGE Data Link (24268): client closed connection
MERGE Data Link (24268): listening on port 11015
MERGE Data Link (24270): client closed connection
MERGE Data Link (24270): listening on port 11017
MERGE Data Link (24264): client closed connection
MERGE Data Link (24264): listening on port 11011
MERGE Data Link (24273): client closed connection
MERGE Data Link (24273): listening on port 11020
MERGE Data Link (24271): client closed connection
MERGE Data Link (24271): listening on port 11018
MERGE Data Link (24277): client closed connection
MERGE Data Link (24277): listening on port 11024
MERGE Data Link (24275): client closed connection
MERGE Data Link (24275): listening on port 11022
MERGE Data Link (24274): client closed connection
MERGE Data Link (24274): listening on port 11021
MERGE Data Link (24276): client closed connection
MERGE Data Link (24276): listening on port 11023 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: 6.png
|
|
|
870
|
Fri Jul 7 10:52:34 2023 |
TD, PJCS | Test of AIDA FEE64 d8:80:39:42:0d:0b ( aida03 ) - ASIC mezzanine replaced |
Test of AIDA FEE64 d8:80:39:42:0d:0b ( aida03 ) - ASIC mezzanine replaced
ISOL test station STFC DL, T9
Pulser BNC PB-5
Amplitude 1.0V
Attenuation x1
Polarity +
Frequency 100Hz
Tail pulse, decay time 1ms
Delay 250ns (min)
ASIC settings 2019May22-10.19.28
Slow comparator 0x80
Adaptor PCB - PJCS
FEE64 temperatures OK - attachments 1
System wide checks OK - attachments 2-5
Statistics OK - attachments 6-7
Hit/HitRate spectra OK - attachment 8
LEC spectra - attachments 9-12
Data observed for all channels of ASIC #1, 3, & 4
Data observed (double peaks) ASIC#2 channels 4-7 & 12-15, no data observed channels 0-3 & 8-11 - ASIC#2 address bit #2 set always ON? ASIC #2 fail or Mezzanine-FEE64
connection issue?
Typical pulser peak widths 15-17 channels FWHM ASIC #1-4
Wave spectra OK - attachments 13-16
19/7/23 removed mezzanine and cleaned contacts with ipa. cleaned FEE contacts. reassembled mezzanine to FEE and tested. ASIC 2 now ok. |
| Attachment 1: Screenshot_from_2023-07-06_11-02-57.png
|
|
| Attachment 2: Screenshot_from_2023-07-06_11-03-52.png
|
|
| Attachment 3: Screenshot_from_2023-07-06_11-04-14.png
|
|
| Attachment 4: Screenshot_from_2023-07-06_11-04-18.png
|
|
| Attachment 5: Screenshot_from_2023-07-06_11-04-22.png
|
|
| Attachment 6: Screenshot_from_2023-07-06_11-04-57.png
|
|
| Attachment 7: Screenshot_from_2023-07-06_11-05-15.png
|
|
| Attachment 8: Screenshot_from_2023-07-06_11-07-18.png
|
|
| Attachment 9: Screenshot_from_2023-07-06_11-12-31.png
|
|
| Attachment 10: Screenshot_from_2023-07-06_11-14-24.png
|
|
| Attachment 11: Screenshot_from_2023-07-06_11-16-55.png
|
|
| Attachment 12: Screenshot_from_2023-07-06_11-18-49.png
|
|
| Attachment 13: Screenshot_from_2023-07-06_11-20-09.png
|
|
| Attachment 14: Screenshot_from_2023-07-06_11-20-36.png
|
|
| Attachment 15: Screenshot_from_2023-07-06_11-21-03.png
|
|
| Attachment 16: Screenshot_from_2023-07-06_11-21-40.png
|
|
|
945
|
Fri Mar 29 08:39:18 2024 |
TD, PJCS | Unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) | >
> At AIDA test station T9, STFC DL unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) - see attachments
>
> aida04 appears to have booted OK and I can connect using telnet
>
> MIDAS 8015 server exits - signal 1
I’ve had this problem too. The solution is to have the single FEE twice in the list in the config file. The software is then quite happy.
Alternatively a single FEE can still be accessed directly and will operate successfully. The only thing missing is the spectra function menu. They won’t work, so FWHM is harder to determine. |
|
449
|
Thu Nov 10 09:56:20 2016 |
TD, OH, ML | NP1412 R26 R27 | start 18.55 10.11.16
stop
AIDA filename R26_0
BRIKEN filename 161109_1852_767778Ni_045
BigRIPS filename 443
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents OK attachments 1 and 2
Degrader all degraders out
F11 rate 430Hz
BigRIPS setting 767778Ni F5 out, F7 CH2 in, F11 6mm C in
From offline analysis of R26_2
*** DSSSD # 1 count: 459 old count: 225 dt: 1.02 s HEC rate: 229.83 Hz
*** DSSSD # 2 count: 385 old count: 191 dt: 1.02 s HEC rate: 190.54 Hz
*** DSSSD # 3 count: 461 old count: 228 dt: 1.02 s HEC rate: 228.85 Hz
*** DSSSD # 4 count: 403 old count: 197 dt: 1.02 s HEC rate: 202.33 Hz
*** DSSSD # 5 count: 218 old count: 121 dt: 1.02 s HEC rate: 95.27 Hz
*** DSSSD # 6 count: 87 old count: 42 dt: 1.02 s HEC rate: 44.20 Hz
19.02 FEE64 temperature OK - see attachment 3
19.16 BRIKEN DAQ problems following restart - multiple correlation scaler reset requests issued - ignore data
before R26_5
New BRIKEN data file 161109_1852_767778Ni_046
19.20 AIDA DAQ stalled (presumably *end* of LN2 fill cycle)
Soft reset OK
Clock lock state status 0xd - see attachment 6
19.29 Start DAQ (R27)
19.35 BRIKEN DAQ problems starting SyncCheck program - - multiple correlation scaler reset requests issued -
ignore data before R27_2
19.37 All degraders (5.4mm Al) in for new Takechi et al. setting
BigRIPS setting 767778Ni F5 in, F7 out, F11 6mm C in
BRIKEN filename 161109_1852_767778Ni_045
AIDA fileame R27_3
BigRIPS filename 444
19.40 All degraders out
DSSSD bias & leakage currents OK attachments 4 & 5
From offline analysis of R27_4
*** DSSSD # 1 count: 281 old count: 247 dt: 2.31 s HEC rate: 121.43 Hz
*** DSSSD # 2 count: 247 old count: 219 dt: 2.31 s HEC rate: 106.74 Hz
*** DSSSD # 3 count: 286 old count: 252 dt: 2.31 s HEC rate: 123.59 Hz
*** DSSSD # 4 count: 287 old count: 253 dt: 2.31 s HEC rate: 124.02 Hz
*** DSSSD # 5 count: 201 old count: 178 dt: 2.31 s HEC rate: 86.86 Hz
*** DSSSD # 6 count: 33 old count: 29 dt: 2.31 s HEC rate: 14.26 Hz
20.36 Noted x4 increase in F11 rate to c. 2kHz
All degraders in (5.4mm Al)
BRIKEN DAQ shows x4-5 increase for c. 6 minutes
DSSSD bias & leakage currents OK attachments 7 & 8 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 10.png
|
|
| Attachment 5: 11.png
|
|
| Attachment 6: 4.png
|
|
| Attachment 7: 20.png
|
|
| Attachment 8: 21.png
|
|
|
433
|
Tue Nov 8 13:37:06 2016 |
TD, OH, DK | NP1412 R2 | 10:36 Run 2 Start
Degraders (5.4mm Al) in at start and all removed once started.
Other settings same as R1.
22.45 DAQ stop OK
All variable degraders (5.4mm Al) in
From analysis of R2_3
S O R T C O M P L E T E ..... Tue Nov 8 22:59:02 2016
*** ENTRY finish
*** data items: 146156010 ( 541115.06 Hz)
*** ADC events: 7815683 ( 28936.09 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 51901 old count: 51732 dt: 84.55 s HEC rate: 613.87 Hz
*** DSSSD # 2 count: 42966 old count: 42831 dt: 84.55 s HEC rate: 508.19 Hz
*** DSSSD # 3 count: 37092 old count: 36983 dt: 84.55 s HEC rate: 438.71 Hz
*** DSSSD # 4 count: 12570 old count: 12532 dt: 84.55 s HEC rate: 148.67 Hz
*** DSSSD # 5 count: 1927 old count: 1921 dt: 84.55 s HEC rate: 22.79 Hz
*** DSSSD # 6 count: 659 old count: 658 dt: 84.55 s HEC rate: 7.79 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Tue Nov 8 22:59:16 2016
s2000-s2005 m_p versus m_n DSSSD #1-6
s2010-s2015 x versus y DSSSD #1-6
s2020-s2025 E_p versus E_n DSSSD #1-6
23.05 DSSSD bias & leakage currents - see attachments 5 & 6
FEE64 temperatures - see attachment 7 |
| Attachment 1: 32.png
|
|
| Attachment 2: 31.png
|
|
| Attachment 3: 30.png
|
|
| Attachment 4: 40.png
|
|
| Attachment 5: 41.png
|
|
| Attachment 6: 42.png
|
|
|
434
|
Tue Nov 8 14:22:16 2016 |
TD, OH, DK | NP1412 R3 | 11:21 Run 3 Started
Degrader moved upstream. AIDA moved to centre of BRIKEN. Fixed degrader moved upstream from centre of BRIKEN.
11:25 Run 3 Stopped |
|
435
|
Tue Nov 8 14:29:34 2016 |
TD, OH, DK | NP1412 Run 4 | 23:28 Run 4 Start
Thick 6mm C target in beam
Running with 3.2mm (variable) + 8mm (fixed) of Al degrader. Fixed degrader in same position as R3.
Variable degrader reduced to 1mm of Al. |
|
425
|
Sun Nov 6 01:34:15 2016 |
TD, OH, CG | Sun 6th November | 10:34 Detector Bias a leakage currents all ok. (Attachments 1 and 2)
Temperatures all ok (Attachment 3)
All system wide checks ok other than clock status see attachment 4
DAQ continues to run ok (R124) (No stop at 6:30am)
DAQ running at about 14MB/s to disc which is faster than before.
Most likely due to the increased rate in detector 1 which is represented at FEEs 17, 20, 22 and 23 in
attachment 5.
Also attached are the spectra for layouts 1-4 & 7-8 as attachments 6-11
When looking at the pulser spectrum in layouts 3 and 4 (attachments 9 and 10) we see that the pulser peaks
relating to this detector is broader shown by
the decreased peak height.
Comparing the waveforms in attachments 11 and 12 to those taken on Monday 31st Oct we see that the noise
in nnaida 5 and 6 has been greatly reduced.
On the others however there appears to be an increase in the amplitude of the noise.
11:25 The second putty window for leakage currents was found to have been frozen for the past 24 hours.
Was reloaded and updated leakage currents are in attachment 13 and 14
12.15 Analysis of R124_291 shows ADC & disc data synchronised - see attachment 15
Analysis of data file - see attachment 16
18:26 DAQ stopped, presumably during LN2 fill cycle.
Restarted the merger and tried "Stop" on the DAQ control page. ~50% of nnaida now show "error."
R124 closed 18.29
Could not regain control of the system. Jorge switched BRIKEN to its internal clock and FEEs power cycled @
19.20.
23.35 DAQ started (R126 - no storage mode)
DSSSD bias & leakage currents OK - see attachment |
| Attachment 1: 10.png
|
|
| Attachment 2: 11.png
|
|
| Attachment 3: 12.png
|
|
| Attachment 4: 13.png
|
|
| Attachment 5: 20.png
|
|
| Attachment 6: 15.png
|
|
| Attachment 7: 14.png
|
|
| Attachment 8: 16
|
| Attachment 9: 17.png
|
|
| Attachment 10: 21.png
|
|
| Attachment 11: 18.png
|
|
| Attachment 12: 19.png
|
|
| Attachment 13: 22.png
|
|
| Attachment 14: 23.png
|
|
| Attachment 15: 30.png
|
|
| Attachment 16: R124_291
|
*** TDR format 3.3.0 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 230847656 ( 1588898.7 Hz)
Other data format: 30240344 ( 208140.9 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 192 ( 1.3 Hz)
RESUME: 192 ( 1.3 Hz)
SYNC100: 1322421 ( 9102.1 Hz)
FEE64 disc: 28913216 ( 199006.4 Hz)
MBS info: 4323 ( 29.8 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 1948 ( 13.4 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 145.288 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.197 0.000
2 0.538 0.566
3 0.000 0.000
4 0.000 0.000
5 0.000 0.000
6 0.102 0.000
7 0.000 0.000
8 0.000 0.000
9 0.036 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.021 0.000
15 0.000 0.000
16 0.000 0.000
17 6.205 6.129
18 0.007 0.000
19 0.003 0.000
20 0.295 0.236
21 0.000 0.000
22 0.590 0.582
23 11.854 11.291
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 1483749 9921002 0 0 6 6 55338 9865652 0 0 60
2 5885786 9284877 0 0 11 11 55212 9229643 0 0 0
3 4498675 60706 0 0 0 0 55415 5291 0 0 0
4 1878077 61899 0 0 0 0 55418 6481 0 0 9
5 7202645 62323 0 0 0 0 55418 6905 0 0 0
6 9007161 69230 0 0 5 5 55375 9522 4323 0 19
7 2676568 61859 0 0 0 0 55416 6443 0 0 22
8 2052380 62598 0 0 0 0 55412 7186 0 0 531
9 5155187 2222775 0 0 3 3 55402 2167367 0 0 0
10 4376399 391579 0 0 0 0 55413 336166 0 0 0
11 990180 60278 0 0 0 0 55417 4861 0 0 0
12 1665947 59140 0 0 0 0 55416 3724 0 0 0
13 4277688 735621 0 0 0 0 55419 680202 0 0 0
14 5563108 3277421 0 0 1 1 55408 3222011 0 0 726
15 4030541 60611 0 0 0 0 55415 5196 0 0 0
16 4056015 60000 0 0 0 0 55416 4584 0 0 0
17 42807103 1357446 0 0 40 40 53051 1304315 0 0 0
18 5897459 156962 0 0 1 1 55413 101547 0 0 0
19 6005138 62145 0 0 2 2 55419 6722 0 0 0
20 16486896 60582 0 0 6 6 55306 5264 0 0 418
21 4037137 77255 0 0 0 0 55418 21837 0 0 140
22 26722373 1954203 0 0 7 7 55190 1898999 0 0 9
23 59021079 59375 0 0 110 110 50899 8256 0 0 14
24 5070365 60457 0 0 0 0 55415 5042 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** Program elapsed time: 27.070s ( 1182.107 blocks/s, 73.882 Mb/s)
|
| Attachment 17: 1.png
|
|
| Attachment 18: 2.png
|
|
|
451
|
Thu Nov 10 12:02:24 2016 |
TD, OH, CG | Thursday 10 November |
21.17 DAQ starts (R30)
Pulser walkthrough
Amplitude 90,000 - 10,000 @ 10,000 step
x5 attenuator IN
t_r 50ns tau_d 50us
polarity -, tail pulse, delay MIN
frequency 250Hz range
21.30 DAQ stops OK
21.32 DAQ starts (R31)
Pulser walkthrough
Amplitude 10,000 - 2,000 @ 2,000 step
21.40 DAQ stops OK
21.44 DAQ starts (R32)
Background
BNC PB-4 pulser OFF
21.59 DAQ stops OK
23.45 Started R35 so Jorge can do some tests.
No storage mode.
00.20 Carried out manual fill on LN2 in advance of beam arriving later (~03.00).
Took around 20mins.
Continued writing to R35 after soft reset of DAQ. |
| Attachment 1: 30.png
|
|
| Attachment 2: 31.png
|
|
| Attachment 3: 32.png
|
|
| Attachment 4: 34.png
|
|
|
572
|
Thu May 18 03:07:47 2017 |
TD, OH, CB | RasPi system console diagnostics | Connecting monitor to RasPi system console diagnostics
May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
May 18 10:59:38 aidas1 dhcpd: DHCPNAK on 10.32.6.189 to b8:27:eb:6b:0a:a0 via p2p1
May 18 10:59:38 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:6b:0a:a0 via p2p1
May 18 10:59:39 aidas1 dhcpd: DHCPOFFER on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 10:59:39 aidas1 dhcpd: Wrote 0 deleted host decls to leases file.
May 18 10:59:39 aidas1 dhcpd: Wrote 0 new dynamic host decls to leases file.
May 18 10:59:39 aidas1 dhcpd: Wrote 44 leases to leases file.
May 18 10:59:39 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 (10.1.1.250) from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 10:59:39 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 11:05:46 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 11:05:46 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
ssh np-monitor -> could not resolve hostname
ssh 10.1.1.117 -> OK
Connecting remotely to RasPi system console diagnostics
http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml -> Looks OK (see attached 1)
Connected 24 USB cables. 6 cables per HUB. Connected all HUBs to RasPi. Pressed Update USB terminal list. We see 24
USBs (0-23) (see attached 2)
Pressed Connect USB terminal. Parse USB Log file for details. We can only see ttyUSB0,1,2,3. Full log:
ttyUSB0 => last host=nnaida14, => last addr=193.62.115.227, ; #panics => 0 ; Finished OK
ttyUSB1 => last host=nnlycca4, => last addr=193.62.115.240, ; #panics => 0 ; Finished OK
ttyUSB10 => last => last ; #panics => 0 ; Not Finished
ttyUSB11 => last => last ; #panics => 0 ; Not Finished
ttyUSB12 => last => last ; #panics => 0 ; Not Finished
ttyUSB13 => last => last ; #panics => 0 ; Not Finished
ttyUSB14 => last => last ; #panics => 0 ; Not Finished
ttyUSB15 => last => last ; #panics => 0 ; Not Finished
ttyUSB16 => last => last ; #panics => 0 ; Not Finished
ttyUSB17 => last => last ; #panics => 0 ; Not Finished
ttyUSB18 => last => last ; #panics => 0 ; Not Finished
ttyUSB19 => last => last ; #panics => 0 ; Not Finished
ttyUSB2 => last host=nnaida11, => last addr=193.62.115.232, ; #panics => 0 ; Finished OK
ttyUSB20 => last => last ; #panics => 0 ; Not Finished
ttyUSB21 => last => last ; #panics => 0 ; Not Finished
ttyUSB22 => last => last ; #panics => 0 ; Not Finished
ttyUSB23 => last => last ; #panics => 0 ; Not Finished
ttyUSB3 => last host=nnaida12, => last addr=193.62.115.233, ; #panics => 0 ; Finished OK
ttyUSB4 => last => last ; #panics => 0 ; Not Finished
ttyUSB5 => last => last ; #panics => 0 ; Not Finished
ttyUSB6 => last => last ; #panics => 0 ; Not Finished
ttyUSB7 => last => last ; #panics => 0 ; Not Finished
ttyUSB8 => last => last ; #panics => 0 ; Not Finished
ttyUSB9 => last => last ; #panics => 0 ; Not Finished
ttyUSB0
ttyUSB1
ttyUSB10
ttyUSB11
ttyUSB12
ttyUSB13
ttyUSB14
ttyUSB15
ttyUSB16
ttyUSB17
ttyUSB18
ttyUSB19
ttyUSB2
ttyUSB20
ttyUSB21
ttyUSB22
ttyUSB23
ttyUSB3
ttyUSB4
ttyUSB5
ttyUSB6
ttyUSB7
ttyUSB8
ttyUSB9
Ssh'ed to RasPi. There are only four log files in ~/logs/
sudo lsusb -t results in
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
|__ Port 2: Dev 4, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 5, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 6, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 7, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 8, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 9, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 10, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 11, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 20, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 21, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 22, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 23, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 24, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 25, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 26, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 27, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 13, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 14, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 15, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 16, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 17, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 18, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 19, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 5: Dev 28, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 29, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 30, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 31, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 32, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 33, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 34, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 35, If 0, Class=vend., Driver=ftdi_sio, 12M |
| Attachment 1: 105.png
|
|
| Attachment 2: 105.png
|
|
| Attachment 3: 106.png
|
|
|
573
|
Thu May 18 09:29:50 2017 |
TD, OH, CB | RasPi system console diagnostics | > Connecting monitor to RasPi system console diagnostics
>
> May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
> May 18 10:59:38 aidas1 dhcpd: DHCPNAK on 10.32.6.189 to b8:27:eb:6b:0a:a0 via p2p1
> May 18 10:59:38 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:6b:0a:a0 via p2p1
> May 18 10:59:39 aidas1 dhcpd: DHCPOFFER on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 10:59:39 aidas1 dhcpd: Wrote 0 deleted host decls to leases file.
> May 18 10:59:39 aidas1 dhcpd: Wrote 0 new dynamic host decls to leases file.
> May 18 10:59:39 aidas1 dhcpd: Wrote 44 leases to leases file.
> May 18 10:59:39 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 (10.1.1.250) from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 10:59:39 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 11:05:46 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 11:05:46 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
>
>
> ssh np-monitor -> could not resolve hostname
> ssh 10.1.1.117 -> OK
>
> Connecting remotely to RasPi system console diagnostics
>
> http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml -> Looks OK (see attached 1)
> Connected 24 USB cables. 6 cables per HUB. Connected all HUBs to RasPi. Pressed Update USB terminal list. We see 24
> USBs (0-23) (see attached 2)
> Pressed Connect USB terminal. Parse USB Log file for details. We can only see ttyUSB0,1,2,3. Full log:
>
> ttyUSB0 => last host=nnaida14, => last addr=193.62.115.227, ; #panics => 0 ; Finished OK
> ttyUSB1 => last host=nnlycca4, => last addr=193.62.115.240, ; #panics => 0 ; Finished OK
> ttyUSB10 => last => last ; #panics => 0 ; Not Finished
> ttyUSB11 => last => last ; #panics => 0 ; Not Finished
> ttyUSB12 => last => last ; #panics => 0 ; Not Finished
> ttyUSB13 => last => last ; #panics => 0 ; Not Finished
> ttyUSB14 => last => last ; #panics => 0 ; Not Finished
> ttyUSB15 => last => last ; #panics => 0 ; Not Finished
> ttyUSB16 => last => last ; #panics => 0 ; Not Finished
> ttyUSB17 => last => last ; #panics => 0 ; Not Finished
> ttyUSB18 => last => last ; #panics => 0 ; Not Finished
> ttyUSB19 => last => last ; #panics => 0 ; Not Finished
> ttyUSB2 => last host=nnaida11, => last addr=193.62.115.232, ; #panics => 0 ; Finished OK
> ttyUSB20 => last => last ; #panics => 0 ; Not Finished
> ttyUSB21 => last => last ; #panics => 0 ; Not Finished
> ttyUSB22 => last => last ; #panics => 0 ; Not Finished
> ttyUSB23 => last => last ; #panics => 0 ; Not Finished
> ttyUSB3 => last host=nnaida12, => last addr=193.62.115.233, ; #panics => 0 ; Finished OK
> ttyUSB4 => last => last ; #panics => 0 ; Not Finished
> ttyUSB5 => last => last ; #panics => 0 ; Not Finished
> ttyUSB6 => last => last ; #panics => 0 ; Not Finished
> ttyUSB7 => last => last ; #panics => 0 ; Not Finished
> ttyUSB8 => last => last ; #panics => 0 ; Not Finished
> ttyUSB9 => last => last ; #panics => 0 ; Not Finished
>
> ttyUSB0
> ttyUSB1
> ttyUSB10
> ttyUSB11
> ttyUSB12
> ttyUSB13
> ttyUSB14
> ttyUSB15
> ttyUSB16
> ttyUSB17
> ttyUSB18
> ttyUSB19
> ttyUSB2
> ttyUSB20
> ttyUSB21
> ttyUSB22
> ttyUSB23
> ttyUSB3
> ttyUSB4
> ttyUSB5
> ttyUSB6
> ttyUSB7
> ttyUSB8
> ttyUSB9
>
> Ssh'ed to RasPi. There are only four log files in ~/logs/
>
> sudo lsusb -t results in
>
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
> |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/5p, 480M
> |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
> |__ Port 2: Dev 4, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 5, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 6, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 7, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 8, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 9, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 10, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 11, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 20, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 21, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 22, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 23, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 24, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 25, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 26, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 27, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 13, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 14, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 15, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 16, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 17, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 18, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 19, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 5: Dev 28, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 29, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 30, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 31, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 32, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 33, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 34, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 35, If 0, Class=vend., Driver=ftdi_sio, 12M
Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
If there is nothing to log from the consoles then the Pi won't have made a log file.
The software opens and closes the log file each time a line of text comes in from the FEE64. |
|
574
|
Thu May 18 09:46:36 2017 |
TD, OH, CB | RasPi system console diagnostics |
> Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
> If there is nothing to log from the consoles then the Pi won't have made a log file.
> The software opens and closes the log file each time a line of text comes in from the FEE64.
The most recent power cycle of the FEE64s was May 5
DAQ stop/go per your request - see Elog https://elog.ph.ed.ac.uk/AIDA/571 |
|