 Mon May 23 17:21:29 2016, Patrick Coleman-Smith, [HowTo] A solution to the problem of no SYNCs
|
When starting Aida some FEE64 fail to provide SYNC data , or any data for that matter, on the ASIC data stream.
The problem is that the ASIC Readout is not starting properly and is becoming stuck waiting for an internal
event which will never arrive.
|
|
Fri Nov 25 22:28:13 2016, TD, [How to] Start MIDASsort
|
aidas1> setenv MIDASBASE /MIDAS@aidas.240215
aidas1> setenv PATH $MIDASBASE/bin_Linux64:$PATH
|
|
Mon Oct 31 04:50:59 2016, TD, [How to] Monitor AIDA (October 2016)
|
All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.
|
|
Thu Jun 2 09:04:57 2016, TD, [How to] Monitor AIDA
|
Every 4h
1) Record DSSSD #1 = #6 detector bias voltages and leakage currents in written logbook
|
|
Sat Nov 26 07:26:51 2016, TD, [How to] Desktop application launchers for Httpd for Data Acquisition & Merge/TapeServer, Merger & TapeServer
|
Type: Application in Terminal
Name: Httpd for Data Acquisition
|
|
Fri Jun 10 14:02:17 2016, TD (courtesy VFEP), [How to] Avoid Power-Cycling/Rebooting FEE64s
|
If you obtain the 'unable to connect' from one, or more, of the FEE64s try the
following procedure *before* power-cycling/rebooting all of the FEE64s.
|
|
Sun Nov 27 03:25:20 2016, TD, [How to] AIDA discriminator thresholds
|
The function and setting of the AIDA discriminators is as follows:
LEC (20MeV FSR) MEC (1GeV FSR) HEC (20GeV FSR) Function
|
Mon Oct 31 04:02:11 2016, TD, [How To] Stop Runs (October 2016) 
|
All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.
|
|
Thu Nov 3 02:29:45 2016, TD, [How To] Startup AIDA (October 2016) 29x
|
Assumes 3-phase ac power (to Julabo FL11006 recirculating chiller) and single-phase ac power
(to AIDA NIM bins, PSUs, network switches, USB-controlled ac mains relay and Raspberry Pi)
is connected and switched on.
|
|
Fri May 27 11:10:37 2016, TD, [How To] Startup AIDA 34x
|
1) Start Julabo FL11006 Recirculating Chiller
See manual (page 19) http://www2.ph.ed.ac.uk/~td/AIDA/Information/Julabo%20FL11006.pdf
|
|
Fri May 27 11:16:40 2016, TD, [How To] Start and Stop Runs 7x
|
All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.
AIDA has multiple, independent data acquisition servers connected by an Ethernet network.
|
|
Mon Oct 31 02:26:32 2016, TD, [How To] Start Runs (October 2016) 12x
|
All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.
AIDA has multiple, independent data acquisition servers connected by an Ethernet network.
|
|
Mon Feb 16 09:41:45 2015, Patrick Coleman-Smith, [How To] Set up the Raspberry Pi for PuTTY
|
When logged in and before opening PuTTY open a cmdtool window.
cd /dev
sudo chmod 777 /dev/ttyUSB0 |
 Tue Feb 17 08:03:32 2015, Patrick Coleman-Smith, [How To] Set up the Raspberry Pi for PuTTY
|
Quote:
When logged in and before opening PuTTY open a cmdtool window. |
|
Thu May 5 08:30:00 2016, TD, [How To] Set MACB Trigger Output Mode
|
From the 'AIDA Control' tab select 'Local Controls'
|
|
Wed May 4 06:35:08 2016, TD, [How To] Save AIDA Settings & Options
|
From 'Control' tab select 'Save/Restore Settings'
|
|
Mon Apr 27 04:54:02 2015, VFEP & TD, [How To] Remote control of CAEN N1419 Programmable HV Power Supply
|
@ CAEN N1419
|
|
Fri Nov 2 01:56:00 2018, TD, [How To] Recover from unable to connect to nnaida ...
|
If you obtain the 'unable to connect' from one, or more, of the FEE64s try the
following procedures *before* power-cycling/rebooting all of the FEE64s:
|
|
Thu May 5 07:55:32 2016, TD, [How To] Mount SAS and USB disks
|
*******************************************************************************************************
UPDATE 24 May 2016
|
|
Sat Jun 11 16:06:16 2016, TD, [How To] Monitor per FEE64 Activity
|
Launch terminal and enter commands
|