 Wed Nov 14 07:43:35 2018, TD, Wednesday 14 November 16:00 - 00:00 21x
|
16.44 DAQ continues OK - AIDA file RIBF148/R5_432
165Pm BigRIPS setting + 2.8mm Al degrader
|
|
Tue Nov 13 22:58:49 2018, OH , Wednesday 14 November 08:00 - 16:00 30x
|
08:01 BigRips and BRIKEN stop
AIDA on file R5_346
|
|
Tue Nov 13 14:27:38 2018, LS, Wednesday 14 November 00:00 to 08:00 9x
|
00:00 BRIKEN stop AIDA file RIBF148/R5_269
|
|
Wed Jun 14 07:01:34 2017, TD, Wednesday 14 June 21x
|
15.01 DAQ continues
AIDA file RIBF148/R8_22
|
|
Wed Oct 12 02:58:19 2016, TD & CG, Wednesday 12 October
|
10.50 Merger & TapeServer found stopped
connect errors - see attachment 1
|
|
Wed Jun 12 01:54:04 2019, OH, TD, CG, CB, CA, Wednesday 12 June 11x
|
09:54 DAQ Continues ok with merger running at ~ 560k data items per second
ASIC settings 2019May19-17.54.03
|
|
Wed Oct 11 16:53:20 2023, TD, Wednesday 11 October contd. 14x
|
CAEN N1419ET ch 2 - all outputs non-floating ( internal LK fitted )
Standard coaxial HV cable chained to aida12, aida03, aida11, aida09, aida01 & aida10
aida04 LK1 ( local gnd ) fitted
|
|
Wed Oct 11 09:37:30 2023, TD, Wednesday 11 October 48x
|
10.00 Water flow & temp OK
Power ON
|
|
Wed May 11 06:37:32 2016, AE, VP, BM, Wednesday 11 May
|
*2:30 pm*: changed power source of USB-controlled power supply for FEEs. Now one of the power cables is connected
to the 'B' power supply of F11, and the second to the 'C' power supply (these are in the unit on top of WASBI
crates). The reason for change is that before both were connected to 'C', and drained current was very close to
|
|
Wed May 10 02:55:13 2017, TD, OH, Wednesday 10 May 8x
|
10.55 DAQ continues OK
Current file May2017/R6_44
|
|
Wed Nov 1 02:24:20 2017, OH, Wednesday 1 November
|
11:24 DAQ running OK - data transfer not enabled
BNC PB-4
|
|
Wed Jun 1 01:33:58 2016, TD, Wednesday 1 June 2016 9x
|
09.30 Detector biases and leakage currents - ambient temp +24.9 deg C - attachments 1-2
10.08 Connection lost to nnaida27 and nnaida28
|
 Wed Jun 1 09:00:13 2016, TD - Reply PJCS, Wednesday 1 June 2016
|
> 09.30 Detector biases and leakage currents - ambient temp +24.9 deg C - attachments 1-2
>
> 10.08 Connection lost to nnaida27 and nnaida28
|
|
Wed Jun 1 13:58:48 2016, TD - Reply PJCS, Wednesday 1 June 2016
|
> Check the Local Controls for the setting of the LMK3200 control rgister.
> If you recall from the problem with nnaida5 the value should be 0xB.
|
|
Tue Jun 18 23:58:46 2019, CB, Wed Jun 19 8:00-16:00 19x
|
08:00 Shift change
No change in settings
|
|
Wed Jun 19 08:30:36 2019, CG, Wed Jun 19 16.00 - end of run
|
16.10 DAQ continues as before.
Merger rate ~700k items/s and ~5.3Kb/s
Individual FEE rates remain roughly constant
|
|
Tue Jun 6 15:59:19 2017, DK, Wed 7 June night shift 14x
|
7 June 2017
00:05 All system-wide checks are passed
|
|
Wed Feb 18 05:49:29 2015, CG, AE, TD, PJC-S, Wed 18th Feb progress 15x
|
18/02/15
1300: Error seen when trying to check ASIC settings. See Attachment #1. Power cycle removed error.
nnaida3 still performing much better than other three cards connected to detector |
|
Fri Jun 9 04:53:24 2017, TD, Waveforms 28x
|
x-scale 1000ch = 2ms
y-scale expanded
|
|
Sat Oct 28 06:25:07 2017, TD, Waveforms 10x
|
For comparison with waveforms shown in https://elog.ph.ed.ac.uk/AIDA/665 and https://elog.ph.ed.ac.uk/AIDA/668
|