ID |
Date |
Author |
Subject |
Text |
|
544
|
Wed Apr 24 12:48:35 2024 |
TD | Wednesday 24 April |
Replace AIDA ASIC mezzanine of aida01
|
21x |
35
|
Wed Nov 25 10:39:37 2020 |
TD | Wednesday 25 November |
10.39
|
7x |
446
|
Wed Sep 27 15:56:41 2023 |
TD | Wednesday 27 September |
16.55 CARME IE514 8.2e-11 mbar
|
|
31
|
Wed Oct 28 10:41:57 2020 |
TD | Wednesday 28 October |
10.32
|
6x |
382
|
Wed Nov 30 08:52:59 2022 |
AR TD | Wednesday 30 November | 9:40
DSSD bias and leakage current values:
-99.99 V |
26x |
540
|
Wed Mar 6 10:47:11 2024 |
JG, TD | Wednesday 6 March - PEXARIA5 WR test |
Courtesy Nik Kurz, JG has installed a PEXARIA5
PCIe card adjacent to CARME - BuTIS single-mode |
|
2
|
Tue Aug 18 11:26:26 2020 |
JM | Week ending Friday 14/08/20 | Week ending friday 14/08/20
CARME chamber securely mounted
upon aluminium frame and support skis. Neg-ion |
|
135
|
Sun Oct 31 07:41:20 2021 |
CB JM + RSS | Wires plugged in DSSDs | (Wed 27 October)
Started with top-most flange. Attemptedto
plug in MACOR lead in DSSD plug in preparation |
8x |
147
|
Wed Nov 10 14:41:12 2021 |
TD RSS + CB (remotely) | Wrapping CARME in heating tape | ML reports that baking of the upstream section
(gas jet interaction chamber plus e-target)
has commenced - initially to 50 deg C to |
|
489
|
Sat Feb 3 15:05:10 2024 |
CB, TD | [How To] Restart Anydesk | 1. Check Proxy server is correct
localhost : 8080
incoming connections 7070 |
|
119
|
Wed Oct 13 11:59:23 2021 |
TD | [How to] Open COF600 copper wire seals |
Use the M10 jacking points provided top/bottom
and
|
|
482
|
Tue Jan 30 14:04:30 2024 |
NH | [HowTo] Update MACB Firmware | This is how to update the MACB firmware using
the opensource tool xc3sprog
|
|
478
|
Sat Jan 27 20:38:15 2024 |
PJCS | [INFO] Steps to diagnose White Rabbit problems | This is a suggested sequence of actions
to help with the current problem with the
White Rabbit timestamp distribution. Test |
|
182
|
Mon Jan 31 08:58:38 2022 |
OH, TD, JM | centos server configuration | Steps taken:
- MIDAS_Releases, Embedded and Exports files
brought across from the previously working |
8x |
259
|
Wed Feb 23 19:22:55 2022 |
CN, TD | check |
- Motor checked , OK
SW3 |
10x |
267
|
Thu Feb 24 08:15:23 2022 |
JG, MS | check | Beam is still beeing tuned. Target is off.
There is a problem with ADC calibration
of aida5: see entry https://elog.ph.ed.ac.uk/CARME/268 |
13x |
269
|
Thu Feb 24 09:43:16 2022 |
JG, MS | check | Beam is still beeing tuned. Target is off.
- Motor on manual |
13x |
271
|
Thu Feb 24 22:45:08 2022 |
Jordan, George, Rui-Jiu Chen | check | - Motor fully out position.
SW3
- Merger OK |
14x |
275
|
Fri Feb 25 03:01:11 2022 |
Rui-Jiu Chen, Alex | check | Still no beam in CRING.
Motor fully out position.
SW3 |
14x |
277
|
Fri Feb 25 05:04:16 2022 |
Rui-Jiu Chen, Alex | check | Still no beam in CRING.
Motor fully out position.
SW3 |
14x |