| |
ID |
Date |
Author |
Subject |
Text |
 |
|
|
107
|
Mon Dec 16 14:48:02 2019 |
NH TD | AIDA 16.12.19 | DSSD Snout was reassembled to install the
second bPlast (downstream)
(fig 1)
|
|
|
|
106
|
Wed Dec 11 10:58:52 2019 |
NH | Initital Dec. Analysis | Fig 1: 2D hit pattern of each AIDA DSSD for
MBS run 24 (40Ar primary beam, centred)
|
11x |
|
|
105
|
Sat Dec 7 02:39:02 2019 |
DK, NH et al. | 34Si Fragments PID | See attached
Tentative PID (DK) as attachment #3
|
|
|
|
104
|
Fri Dec 6 20:34:56 2019 |
CA, DK, NH | Dec 6 Night Shift | 21.35 AIDA DAQ currently running, TapeService
on, not writing to storage
|
15x |
|
|
103
|
Thu Dec 5 22:00:11 2019 |
CA, DK, NH | Dec 5 Night Shift | 15:30
TD found the merger was running at ~43
Mb/s
|
30x |
|
|
102
|
Wed Nov 27 16:33:50 2019 |
NH | New Bias & Waveforms | HV core (-160 V) now attached to bottom
3 FEEs (with grounded kapton)
DSSDs bias OK, leakages unchanged |
|
|
|
101
|
Mon Nov 25 13:25:51 2019 |
NH | Waveforms | > AIDA Waveforms immediately after beam at
21.11.19 8am or so.
|
|
|
|
100
|
Fri Nov 22 08:55:31 2019 |
NH | Waveforms | AIDA Waveforms immediately after beam at 21.11.19
8am or so. |
|
|
|
99
|
Wed Nov 20 20:36:14 2019 |
CA, CB, DK, NH | 20/21 November Night Shift | 21:35 (NH) - A few merger timestamp errors
were appearing - Decided to powercycle all
FEE64s, all checks OK.
|
17x |
|
|
98
|
Tue Nov 19 21:22:06 2019 |
CA, CB, DK, NH | 19/20 November 2019 - overnight shift | 19 November
Waiting for 40Ar beam to be delivered for |
15x |
|
|
97
|
Wed Nov 13 15:38:20 2019 |
NH | [HowTo] MBS for AIDA (Nov 19) | For MBS integration AIDA forwards its data
to an MBS Foreign Data Receiver (FDR), currently
the PC assigned for this task is x86l-94.
|
|
|
|
96
|
Wed Nov 13 09:10:37 2019 |
CA, NH, OH | 13th November 2019 | 10:10 moved HV cables from 11 and 12 to 10
and 9 - all detectors biased in same configuration
|
|
|
|
95
|
Wed Nov 13 01:54:00 2019 |
TD | Aida10 Unusual Pulser Peak | Double peaking normally indicates periodic
baseline variations with period comparable
to shaping time |
|
|
|
94
|
Tue Nov 12 14:10:18 2019 |
NH, OH, CA | Aida10 Unusual Pulser Peak | aida10 (no alpha rate recorded) has a strange
pulser peak - looks like double peak?
Pulser terminator checked and OK... |
|
|
|
93
|
Tue Nov 12 13:59:07 2019 |
NH, OH, CA | Awfully noisy waveforms | Rates in all FEEs much higher than before
- waveform shows very noisy in all systems.
- attachment 1
|
8x |
|
|
92
|
Tue Nov 12 13:22:19 2019 |
OH, NH, CA | AIDA09 Replacement | ASIC 1 on FEE9 was not producing signals.
A new HDMI cable was installed but still |
|
|
|
91
|
Mon Nov 11 10:34:19 2019 |
NH | Alpha Analysis (11.11.19) | Analysis of approx 20GB of data since Thursday
night (not continuous - estimate of hours
incominG) |
9x |
|
|
90
|
Thu Nov 7 10:22:26 2019 |
Nic, Patrick | Reply: WR Timestamps | > > > All 12 FEEs have valid WR Timestamps
> > > Had to powercycle aida09 once as before
raw readout was displaying upper 12 bits |
|
|
|
89
|
Tue Nov 5 11:15:41 2019 |
NH PJCS | Report: aida10 database corruption | If ypou now check the actual values in
the aida10 Options screen are the correct
? |
|
|
|
88
|
Tue Nov 5 10:32:21 2019 |
NH PJCS | Report: aida10 database corruption | Hi, see the attached files in the original
comment. I think the BACKUPCorrupt is quite
old now. |
|