|
ID |
Date |
Author |
Subject |
|
718
|
Thu Jul 24 15:50:01 2025 |
CC, MP, NK | Check of BB7 impact |
HT of upstream AIDA from iseg, HT cable shielded, 100V, 17 uA. HT of downstream AIDA from CAEN, AIDA#0. Both channel 0 and 1 of CAEN are on, even though there is just one channel connected. DEGAS platform closed. The crates of BB7 and bplast have been put to the ground of the AIDA's structure (cupper sheet)
Attachment 1: TEST1: BB7 fully connected = 2 tiles of BB7 have been connected to the mesytec preamps. BB7 is not biased. The mesytec preamps have been fully connected and supplied but 6/8 black cables are not connected on the other side. 4X and 4Y are connected to the 2 FEBEX cards. The cables of BB7 right between the snout and the preamps are shielded.
AIDA05.1.8L --> FWHM 76-80 channels
Attachment 2: TEST2: BB7 fully disconnected
AIDA05.1.8L --> FWHM 71 channels
Attachment 3: TEST3: BB7 fully disconnected, TAMEX crate unbiased, BB7 NIM crate turned off
AIDA05.1.8L --> FWHM 67 channels
Attachment 4: AIDA01.1.0 --> FWHM 171 channels --> same detector, also biased with iseg but bad results |
Attachment 1: Screenshot_from_2025-07-24_16-49-27.png
|
|
Attachment 2: Screenshot_from_2025-07-24_17-03-44.png
|
|
Attachment 3: Screenshot_from_2025-07-24_17-22-49.png
|
|
Attachment 4: Screenshot_from_2025-07-24_17-29-38.png
|
|
|
717
|
Thu Jul 24 13:36:34 2025 |
CC, MP, NK | AIDA05 connected and disconnected compared to AIDA09 |
HT cable shielded, HT of upstream AIDA from iseg, HT of downstream AIDA from CAEN. Both channel 0 and 1 of CAEN are on, even though there is just one channel connected. During this test, some parallele tests are being done on BB7 Mesytec. In general, middle tile: detector disconnected from preamps but preamps connected on the other side. Right tile: detector connected to preamps, cable shielded but preamps disconnected on the other side (supplied, one output is plugged). Those conditions may have changed during the test. The BB7 and bplast crates are also being connected to the cupper sheet of AIDA's structure to be grounded, the carton pieces under the crates have been removed.
AIDA05 connected, HT 0V
Attachment 1: AIDA05.1.8L --> FWHM 1907 channels
Attachment 2: AIDA09.1.9L --> FWHM 1467 channels
AIDA05 connected, HT 100V
Attachment 3: AIDA05.1.8L --> FWHM 74 channels
Attachment 4: AIDA09.1.8L --> FWHM 79 channels
Attachment 5: AIDA13.1.8L --> FWHM 250 channels
AIDA05 disconnected, HT 0V (cable between the detector and the adaptor board)
Attachment 6: AIDA05.1.8L --> FWHM 16 channels
AIDA05 disconnected, HT 100V
Attachment 7: AIDA05.1.8L --> FWHM 16 channels
Attachment 8: AIDA09.1.8L --> FWHM 87 channels
Attachment 9: AIDA13.1.8L --> FWHM 234 channels
Attachment 10: AIDA12.1.8L --> FWHM 116 channels (bplast cable side disconnected) to be compared to 117 channels (screenshot forgotten to be saved but tags left 21600 and 21171) --> no effect |
Attachment 1: Screenshot_from_2025-07-24_14-48-38.png
|
|
Attachment 2: Screenshot_from_2025-07-24_14-49-27.png
|
|
Attachment 3: Screenshot_from_2025-07-24_15-04-59.png
|
|
Attachment 4: Screenshot_from_2025-07-24_15-07-14.png
|
|
Attachment 5: Screenshot_from_2025-07-24_15-08-24.png
|
|
Attachment 6: Screenshot_from_2025-07-24_15-16-48.png
|
|
Attachment 7: Screenshot_from_2025-07-24_15-26-03.png
|
|
Attachment 8: Screenshot_from_2025-07-24_15-28-48.png
|
|
Attachment 9: Screenshot_from_2025-07-24_15-29-52.png
|
|
Attachment 10: Screenshot_from_2025-07-24_15-50-57.png
|
|
|
716
|
Thu Jul 24 10:28:04 2025 |
CC, NK, MP | Comparison of channels in the same FEE64 and ASIC 05.1 and with AIDA13.1.8L |
BB7 is still connected but not biased (same configuration as the previous elog). The channel of the CAEN power supply #0 is connected to ASIC08 and biased at 100V. The channel of the CAEN power supply #1 is disconnected but still biased at 100V. AIDA04 (chained to AIDA05) is biased via an unshielded cable to an iseg NHQ 246L power supplied, biased at 100 V with 15 uA.
All the outside drain wires of bplast are now taped to the snout.
The red markers of the cursors of the previous test have been left for ease of comparison.
Attachment 1: AIDA05.1.8L --> FWHM 67 channels
Attachment 2: AIDA05.1.1L --> FWHM 69 channels
Attachment 3: AIDA05.1.4L --> FWHM 79 channels
Attachment 4: AIDA05.1.12L --> FWHM 79 channels
Attachment 5: AIDA05.1.15L --> FWHM 79 channels
Attachment 6: AIDA13.1.8L --> FWHM 236 channels, chosen because same place than AIDA05 but for the dowstream detector that is still biased with the CAEN module
Attachment 7: AIDA12.1.8L --> FWHM 91 channels, chosen because same place than AIDA05 but of the bottom of upstream detector that is still biased with the iseg module
Attachment 8: AIDA16.1.8L --> FWHM 143 channels, chosen because same place than AIDA05 of the bottom of dowstream detector that is still biased with the CAEN module. This curve has 2 humps |
Attachment 1: Screenshot_from_2025-07-24_14-17-04.png
|
|
Attachment 2: Screenshot_from_2025-07-24_14-18-32.png
|
|
Attachment 3: Screenshot_from_2025-07-24_14-19-37.png
|
|
Attachment 4: Screenshot_from_2025-07-24_14-21-23.png
|
|
Attachment 5: Screenshot_from_2025-07-24_14-23-57.png
|
|
Attachment 6: Screenshot_from_2025-07-24_14-25-12.png
|
|
Attachment 7: Screenshot_from_2025-07-24_14-27-12.png
|
|
Attachment 8: Screenshot_from_2025-07-24_14-28-44.png
|
|
|
715
|
Wed Jul 23 17:02:22 2025 |
CC, NK | Comparison of channels in the same FEE64 and ASIC 05.1 and with AIDA13.1.8L |
BB7 is still connected but not biased (same configuration as the previous elog). The channel of the CAEN power supply #0 is connected to ASIC08 and biased at 100V. The channel of the CAEN power supply #1 is disconnected but still biased at 100V. AIDA04 (chained to AIDA05) is biased via a shielded cable to an iseg NHQ 246L power supplied, biased at 101 V with 16 uA.
All the outside drain wires of bplast are now taped to the snout.
Attachment 1: AIDA05.1.8L --> FWHM 60 channels
Attachment 2: AIDA05.1.1L --> FWHM 51 channels
Attachment 3: AIDA05.1.4L --> FWHM 57 channels
Attachment 4: AIDA05.1.12L --> FWHM 65 channels
Attachment 5: AIDA05.1.15L --> FWHM 69 channels
Attachment 6: AIDA13.1.8L --> FWHM 277 channels, chosen because same place than AIDA05 but for the dowstream detector that is still biased with the CAEN module
Attachment 7: AIDA12.1.8L --> FWHM 88 channels, chosen because same place than AIDA05 but of the bottom of upstream detector that is still biased with the iseg module
Attachment 8: AIDA16.1.8L --> FWHM 133 channels, chosen because same place than AIDA05 of the bottom of dowstream detector that is still biased with the CAEN module. This curve has 2 humps |
Attachment 1: Screenshot_from_2025-07-23_18-04-44.png
|
|
Attachment 2: Screenshot_from_2025-07-23_18-00-06.png
|
|
Attachment 3: Screenshot_from_2025-07-23_18-00-50.png
|
|
Attachment 4: Screenshot_from_2025-07-23_17-59-13.png
|
|
Attachment 5: Screenshot_from_2025-07-23_17-57-31.png
|
|
Attachment 6: Screenshot_from_2025-07-23_18-01-57.png
|
|
Attachment 7: Screenshot_from_2025-07-23_18-18-53.png
|
|
Attachment 8: Screenshot_from_2025-07-23_18-22-18.png
|
|
|
714
|
Wed Jul 23 15:56:00 2025 |
CC, MP, NK | Test of AIDA05 with new bias module |
Attachment1: AIDA05.1.8L when AIDA05 connected, biased at 101 V with shielded cables. BB7 is still connected but not biased (same configuration as the previous elog). The channel of the CAEN power supply #0 is connected to ASIC08 and biased at 100V. The channel of the CAEN power supply #1 is disconnected but still biased at 100V. AIDA04 (chained to AIDA05) is biased via a shielded cable to an iseg NHQ 246L power supplied, biased at 101 V with 16 uA.
All the outside drain wires of bplast are now taped to the snout.
The red markers of the cursors of the previous test have been left for ease of comparison.
FWHM: 21699-21644 = 55 channels (to be compared with the previous elogs between 73 channels and 79 channels)
Conclusion: a significant improvement can be observed with a cleaner power supply. |
Attachment 1: Screenshot_from_2025-07-23_17-08-56.png
|
|
|
713
|
Wed Jul 23 15:04:26 2025 |
CC, MP, NK | Test of AIDA05 with BB7 connected to Mesytec but not biased |
Attachment1: AIDA05.1.8L when AIDA05 connected, biased at 100 V with not-shielded cables, after the DEGAS platform has been closed, the 2 tiles of BB7 have been connected to the mesytec preamps. BB7 is not biased. The mesytec preamps have been fully connected and supplied but 6/8 black cables are not connected on the other side. 4X and 4Y are connected to the 2 FEBEX cards.
The 2 drain wires of bplast that were hanging on the bottom are now taped to the snout, not making any antena effect anymore.
FWHM: 79 channels (to be compared with the previous elogs between 73 channels and 76 channels)
Conclusion: no significant differences can be observed when BB7 is connected. The tail on the left side of the spectrum in twice as small, most likely because on the now-taped drain wires of bplast |
Attachment 1: Screenshot_from_2025-07-23_16-16-57.png
|
|
|
712
|
Wed Jul 23 13:59:37 2025 |
CC, NK | Shielding of the snout |
Attachment1: AIDA05.1.8L when AIDA05 connected, biased at 100 V with not-shielded cables, CAEN HT, after the base of the snout (screws) has been connected to the ground via cupper sheets
FWHM: 76 channels (to be compared with the 2 previous elogs 73 channels and 75 channels)
Conclusion: no differences can be observed. |
Attachment 1: Screenshot_from_2025-07-23_15-07-42.png
|
|
|
711
|
Wed Jul 23 13:08:30 2025 |
CC, NK | Comparison of channels in the same FEE64 and ASIC 05.1 |
Biased at 100, AIDA05 connected, HT cables not shielded CAEN HT
Attachment 1: AIDA05.1.8L --> FWHM 75 channels
Attachment 2: AIDA05.1.1L --> FWHM 70 channels; peak of the pulser shifted to the right (red lines on the left: cursor for the 1.8L)
Attachment 3: AIDA05.1.4L --> FWHM 85 channels; peak of the pulser completely shifted to the left (10 000 on the left)
Attachment 4: AIDA05.1.12L --> FWHM 78 channels
Attachment 5: AIDA05.1.15L --> FWHM 79 channels, peak the most shifted to the right of the 5 curves tested |
Attachment 1: Screenshot_from_2025-07-23_14-11-36.png
|
|
Attachment 2: Screenshot_from_2025-07-23_14-13-46.png
|
|
Attachment 3: Screenshot_from_2025-07-23_14-16-03.png
|
|
Attachment 4: Screenshot_from_2025-07-23_14-18-27.png
|
|
Attachment 5: Screenshot_from_2025-07-23_14-20-42.png
|
|
|
710
|
Wed Jul 23 09:37:34 2025 |
CC, NK | Comparison pulser FWHM with/without HT and detector cables |
This elog is the first reliable. Before, the histograms have not been zero'd
Each test are done and compared for AIDA05.1.8L, compared with the pulser (caracteristics, see attachment1)
Test 1: with HT cables shielded
Attachment 2: HT = 100V; cable AIDA05 connected --> FWHM = 77 channels (= 51.3 keV) with a top of the curve at 100 cts (AIDA9.1.8L has also been checked and was at 89 channels)
Attachment 3: HT = 0V; cable AIDA05 connected --> FWHM = 1757 channels with a top of the curve at 15 cts after almost 40 min because the noise had a baseline of 6500 channels
Attachment 4: HT = 0V; cable AIDA05 disconnected --> FWHM = 16 channels with a top of the curve at 110 cts
Attachment 5: HT = 100V; cable AIDA05 disconnected --> FWHM = 17 channels with a top of the curve at 110 cts
Test 2: with HT cables not shielded
Attachment 6: HT = 0V; cable AIDA05 connected --> FWHM = 1452 channels (968 keV) with a top of the curve at 23 cts after 1:15 hours because the noise had a baseline of 7000 channels
Attachment 7: HT = 100V; cable AIDA05 connected --> FWHM = 73 channels with a top of the curve at 100 cts
Attachment 8: HT = 0V; cable AIDA05 disconnected --> FWHM = 15 channels with a top of the curve at 120 cts
Attachment 9: HT = 100V; cable AIDA05 disconnected --> FWHM = 16 channels with a top of the curve at 125 cts
Conclusion: with shielded or unshielded cables, the noise situation seems to be the same, proving that mot of the noise don't come from the cables
Other thing that have been noticed is that the peak of the pulser is shifted when the cables are connected compared to when they are not connected: connected: peak at around channel 21675; disconnected: peak at around channel 21925 |
Attachment 1: Screenshot_from_2025-07-23_10-55-12.png
|
|
Attachment 2: Screenshot_from_2025-07-23_10-59-32.png
|
|
Attachment 3: Screenshot_from_2025-07-23_11-35-01.png
|
|
Attachment 4: Screenshot_from_2025-07-23_11-39-02.png
|
|
Attachment 5: Screenshot_from_2025-07-23_11-44-52.png
|
|
Attachment 6: Screenshot_from_2025-07-23_13-18-19.png
|
|
Attachment 7: Screenshot_from_2025-07-23_13-29-33.png
|
|
Attachment 8: Screenshot_from_2025-07-23_13-41-33.png
|
|
Attachment 9: Screenshot_from_2025-07-23_13-48-35.png
|
|
|
709
|
Tue Jul 22 18:00:45 2025 |
CC, NK, MP | FWHM aida FEE |
AIDA05 completely disconnected, all the others FEEs64 are fully connected
Attachment 1: aida05, FWHM= 95 ch, 63 keV
Attachment 2: aida15, FWHM= 108 ch, 74 keV |
Attachment 1: Screenshot_from_2025-07-22_18-59-26.png
|
|
Attachment 2: Screenshot_from_2025-07-22_18-59-45.png
|
|
|
708
|
Tue Jul 22 17:00:26 2025 |
MP, CC | Status |
Test with shielded HV cables for both detectors.
The FWHM for ch1 is now 184 ch.
Yesterday cables for cards 5, 6, 10, 11, 12, 14, 16 were partially connected (only 1 out of 2 flat cables was in), now both are connected. |
Attachment 1: Screenshot_from_2025-07-22_17-51-52.png
|
|
Attachment 2: Screenshot_from_2025-07-22_17-59-20.png
|
|
|
707
|
Mon Jul 21 13:01:19 2025 |
MP | Status |
Status before grounding checks |
Attachment 1: Screenshot_from_2025-07-21_14-00-23.png
|
|
Attachment 2: Screenshot_from_2025-07-21_14-00-39.png
|
|
|
706
|
Sun Jun 15 10:53:08 2025 |
TD | Sunday 15 June 2025 |
11.45 DSSSD bias & leakage current - attachment 1
FEE64 temps OK - attachment 2
All system wide checks OK *except* WR decoder status aida02 - attachment 3
WR timestamps OK - attachment 4
ADC data item stats - attachment 5
per FEE64 Rate spectra - attachments 6-7
note ASICs with per channel rates of 22Hz (pulser)
note *all* FEE64 slow comparator 0x64
note ignore aida10 - connected to MSL type BB7 - not biased yet
per p+n FEE64 1.8.L spectra - attachment 8-9
pulser peak widths
aida05, aida14, aida16 c. 15-20 ch FWHM ( c. 10-15keV FWHM ) - cable from DSSSD not connected to adaptor PCB
aida15 c. 137 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests
per p+n FEE64 1.8.W spectra - 20us FSR - attachments 10
per p+n FEE64 1.8.W spectra - 20us FSR - expanded y-scale = 2000 x 122uV/LSB = 0.244V FSR - attachment 11
per n+n FEE64 1.8.W spectra - 20us FSR - attachments 12
15.20 Data suggests 2x (of 6x) Si wafers are not biased - aida11 & aida05-aida12 - J2 cable disconnected
Switch from negative to positive bias polarity
CAEN N1419ET channels 1 and 2 switched from negative to positive polarity
Note internal LK fitted - HV outputs *not* floating
Channel 1 -> DSSSD#0 from aida12 to aida04 (HV daisy chain aida12-aida03-aida15 *not* removed)
Channel 2 -> DSSSD#1 from aida16 to aida08 (HV daisy chain aida16-aida07-aida11 *not* removed)
LK1 removed from adaptor PCBs for aida02. aida04, aida06, aaida08
LK1 fitted aida05, aida13, aida10, aida09, aida15, aida11
LK3 *no* change
DSSSD bias & leakage current - attachment 13
note increase in leakage current for DSSSD#0 but not DSSSD#1
- indicating DSSSD#0 has all Si wafers biased
- all wafers of DSSSD#1 not biased => damaged adaptor PCB and/or cabling, misaligned ribbon cable/Kapton PCB connection within snout
FEE64 temps OK - attachment 14
ADC data item stats - attachment 15
per FEE64 Rate spectra - attachments 16-17
note ASICs with per channel rates of 22Hz (pulser)
note *all* FEE64 slow comparator 0x64
note ignore aida10 - connected to MSL type BB7 - not biased yet
per p+n FEE64 1.8.L spectra - attachment 18-19
pulser peak widths
aida05, aida14, aida16 c. 15-20 ch FWHM ( c. 10-15keV FWHM ) - cable from DSSSD not connected to adaptor PCB
aida15 c. 108 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests
per p+n FEE64 1.8.W spectra - 20us FSR - attachments 20
per p+n FEE64 1.8.W spectra - 20us FSR - expanded y-scale = 2000 x 122uV/LSB = 0.244V FSR - attachment 21
per n+n FEE64 1.8.W spectra - 20us FSR - attachments 22
16.40 Add LK1 to aida03, aida07
DSSSD bias & leakage current - attachment 23
no change
ADC data item stats - attachment 24
per p+n FEE64 1.8.L spectra - attachment 25-26
pulser peak widths
aida05, aida14, aida16 c. 15-20 ch FWHM ( c. 10-15keV FWHM ) - cable from DSSSD not connected to adaptor PCB
aida15 c. 117 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests
per p+n FEE64 1.8.W spectra - 20us FSR - attachments 27
no change
16.50 Increase DSSSD#0 bias from +100V to +120V
DSSSD bias & leakage current - attachment 28
per p+n FEE64 1.8.L spectra - attachment 29-30
pulser peak widths
aida05, aida14, aida16 c. 15-20 ch FWHM ( c. 10-15keV FWHM ) - cable from DSSSD not connected to adaptor PCB
aida15 c. 70 ch FWHM - electronic noise c. 1.2-2x worse than configuration used for 2023/4 tests
per FEE64 Rate spectra - attachments 31-32
per FEE64 1.8.W spectra - 20us FSR - attachments 33-36
aida02 & aida04 stabilised but still very noisy
Switch BNC PB-5 Pulser polarity + to - and connect test- test daisy chain
ADC data item stats - attachment 37
per FEE64 Rate spectra - attachments 38-39
aida02 & aida04 rates significantly lower but not 25Hz expected
per n+n FEE64 1.8.L spectra - attachment 40
pulser peak width aida02 c. 700 ch FWHM - very noisy!
per n+n FEE64 1.8.W spectra 20us FSR - attachment 41
*** Summary
DSSSD#0
3x Si wafers biased OK
p+n junction side electronic noise c. 1.2-2x 2023/4 configuration
n+n Ohmic side very noisy - increased detector HV to stabilise => increased capacitative load cf. 2023/4 configuration?
DSSSD#1
2x Si wafers biased OK, 1x probably not biased
p+n junction side electronic noise > 4x 2023/4 configuration
n+n Ohmic side very noisy/unstable - increased detector HV not attempted due to issues with biasing all 3x Si wafers
MSL type BB7
not biased yet
To Do
Complete connection and grounding of Bplas detectors |
Attachment 1: Screenshot_from_2025-06-15_11-45-34.png
|
|
Attachment 2: Screenshot_from_2025-06-15_11-45-50.png
|
|
Attachment 3: Screenshot_from_2025-06-15_11-46-01.png
|
|
Attachment 4: Screenshot_from_2025-06-15_11-46-29.png
|
|
Attachment 5: Screenshot_from_2025-06-15_11-46-45.png
|
|
Attachment 6: Screenshot_from_2025-06-15_11-47-05.png
|
|
Attachment 7: Screenshot_from_2025-06-15_11-47-11.png
|
|
Attachment 8: Screenshot_from_2025-06-15_11-48-00.png
|
|
Attachment 9: Screenshot_from_2025-06-15_11-48-06.png
|
|
Attachment 10: Screenshot_from_2025-06-15_11-51-44.png
|
|
Attachment 11: Screenshot_from_2025-06-15_11-52-19.png
|
|
Attachment 12: Screenshot_from_2025-06-15_11-52-47.png
|
|
Attachment 13: Screenshot_from_2025-06-15_15-19-56.png
|
|
Attachment 14: Screenshot_from_2025-06-15_15-20-14.png
|
|
Attachment 15: Screenshot_from_2025-06-15_15-30-29.png
|
|
Attachment 16: Screenshot_from_2025-06-15_15-31-20.png
|
|
Attachment 17: Screenshot_from_2025-06-15_15-31-37.png
|
|
Attachment 18: Screenshot_from_2025-06-15_15-32-39.png
|
|
Attachment 19: Screenshot_from_2025-06-15_15-33-02.png
|
|
Attachment 20: Screenshot_from_2025-06-15_15-35-33.png
|
|
Attachment 21: Screenshot_from_2025-06-15_15-36-17.png
|
|
Attachment 22: Screenshot_from_2025-06-15_15-36-54.png
|
|
Attachment 23: Screenshot_from_2025-06-15_16-41-02.png
|
|
Attachment 24: Screenshot_from_2025-06-15_16-38-08.png
|
|
Attachment 25: Screenshot_from_2025-06-15_16-39-34.png
|
|
Attachment 26: Screenshot_from_2025-06-15_16-39-46.png
|
|
Attachment 27: Screenshot_from_2025-06-15_16-41-30.png
|
|
Attachment 28: Screenshot_from_2025-06-15_16-52-15.png
|
|
Attachment 29: Screenshot_from_2025-06-15_16-52-47.png
|
|
Attachment 30: Screenshot_from_2025-06-15_16-53-00.png
|
|
Attachment 31: Screenshot_from_2025-06-15_16-54-00.png
|
|
Attachment 32: Screenshot_from_2025-06-15_16-54-08.png
|
|
Attachment 33: Screenshot_from_2025-06-15_16-54-40.png
|
|
Attachment 34: Screenshot_from_2025-06-15_16-54-58.png
|
|
Attachment 35: Screenshot_from_2025-06-15_16-55-14.png
|
|
Attachment 36: Screenshot_from_2025-06-15_16-55-31.png
|
|
Attachment 37: Screenshot_from_2025-06-15_17-03-49.png
|
|
Attachment 38: Screenshot_from_2025-06-15_17-04-00.png
|
|
Attachment 39: Screenshot_from_2025-06-15_17-04-15.png
|
|
Attachment 40: Screenshot_from_2025-06-15_17-04-40.png
|
|
Attachment 41: Screenshot_from_2025-06-15_17-06-24.png
|
|
|
705
|
Sat Jun 14 11:20:45 2025 |
TD | Saturday 14 June 2025 |
12.21 BNC PB-5 settings
Amplitude 1.0V
Attenuator x1
Frequency 22Hz
Polarity +
Tau_d 1ms
Tail pulse
Clamp ON
Pulser output connected to p+n test daisy chain - n+n test daisy chain not connected
per DSSSD green/yellow ground daisy chain was removed yesterday
FEE64 adaptor PCB grounds connected by heavy duty braid wrapped in copper foil to AIDA support assembly frame
Snout connected to AIDA support assembly frame by heavy duty braid bolted to frame and connected to snout by adhesive copper foil.
DSSSD - FEE64 adaptor PCB cabling (cannot connect some ribbon cables because cable flipped and connector key now incorrectly oriented)
aida10 aida14 aida13
ox xo oo
aida09 aida01 aida05
oo oo xo
aida06 aida02 aida04 aida08 *Beam into screen*
ox oo oo oo
aida15 aida03 aida12
oo oo ox
aida11 aida07 aida16
ox oo xo
o = connected
x = not connected
e.g. J1 J2 connected = oo, J1 only connected = ox
Adaptor PCB top/component side
E J1
R
N
I J2
Adaptor PCB
LK1 fitted aida02, aida04, aida06, aida08
LK3 fitted aida03, aida07
DSSSD bias & leakage current - attachment 1
FEE64 temps OK - attachment 2
All system wide checks OK *except* WR decoder status aida02 - attachment 3
WR timestamps OK - attachment 4
ADC data item stats - attachment 5
per FEE64 Rate spectra - attachments 6-7
note ASICs with per channel rates of 22Hz (pulser)
note *all* FEE64 slow comparator 0x64 ( *note* subsequently found ASIC #2-4 of a number of FEE64s were set to 0x0 )
per p+n FEE64 1.8.W spectra - 20us, 200us, 2ms and 20ms FSR - attachments 8-11
per p+n FEE64 1.8.W spectra - 20ms FSR - expanded y-scale = 2000 x 122uV/LSB = 0.244V FSR - attachment 12
per n+n FEE64 1.8.W spectra - 20ms, 2ms, 200us and 20us FSR - attachments 13-16
per p+n FEE64 1.8.L spectra - attachment 17
pulser peak widths
aida05, aida14, aida16 c. 15-20 ch FWHM ( c. 10-15keV FWHM ) - cable from DSSSD not connected to adaptor PCB
aida09 c. 120 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests
all other FEE64s *very* noisy/unstable
14.45 Found some FEE64s with slow comparator 0x64 for ASIC#1 and 0x0 for ASICs #2-4
Slow comparator 0x64 now set for all ASICs of all FEE64s
ASIC settings saved to 2025Jun14-15.00.09
ADC data item stats - attachment 18
per FEE64 Rate spectra - attachments 19-20
note ASICs with per channel rates of 22Hz (pulser)
note *all* FEE64 slow comparator 0x64
note aida10 to be connected to MSL type BB7 - ignore for time being
per FEE64 1.8.W spectra - 20us FSR - attachments 21-22
per p+n FEE64 1.8.L spectra - attachments 23-24
pulser peak widths
aida05, aida14, aida16 c. 20 ch FWHM - cable from DSSSD not connected to adaptor PCB
aida09 c. 120 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests |
Attachment 1: Screenshot_from_2025-06-14_12-20-58.png
|
|
Attachment 2: Screenshot_from_2025-06-14_12-21-03.png
|
|
Attachment 3: Screenshot_from_2025-06-14_12-22-20.png
|
|
Attachment 4: Screenshot_from_2025-06-14_12-22-49.png
|
|
Attachment 5: Screenshot_from_2025-06-14_12-23-31.png
|
|
Attachment 6: Screenshot_from_2025-06-14_12-23-39.png
|
|
Attachment 7: Screenshot_from_2025-06-14_12-23-49.png
|
|
Attachment 8: Screenshot_from_2025-06-14_12-34-18.png
|
|
Attachment 9: Screenshot_from_2025-06-14_12-35-16.png
|
|
Attachment 10: Screenshot_from_2025-06-14_12-35-53.png
|
|
Attachment 11: Screenshot_from_2025-06-14_12-36-22.png
|
|
Attachment 12: Screenshot_from_2025-06-14_12-36-48.png
|
|
Attachment 13: Screenshot_from_2025-06-14_12-41-57.png
|
|
Attachment 14: Screenshot_from_2025-06-14_12-42-22.png
|
|
Attachment 15: Screenshot_from_2025-06-14_12-42-45.png
|
|
Attachment 16: Screenshot_from_2025-06-14_12-43-05.png
|
|
Attachment 17: Screenshot_from_2025-06-14_12-47-43.png
|
|
Attachment 18: Screenshot_from_2025-06-14_14-46-16.png
|
|
Attachment 19: Screenshot_from_2025-06-14_14-46-24.png
|
|
Attachment 20: Screenshot_from_2025-06-14_14-46-42.png
|
|
Attachment 21: Screenshot_from_2025-06-14_14-47-05.png
|
|
Attachment 22: Screenshot_from_2025-06-14_14-47-24.png
|
|
Attachment 23: Screenshot_from_2025-06-14_14-55-39.png
|
|
Attachment 24: Screenshot_from_2025-06-14_14-55-57.png
|
|
Attachment 25: 20250614_130606.jpg
|
|
Attachment 26: 20250614_132851.jpg
|
|
Attachment 27: 20250614_132846.jpg
|
|
Attachment 28: 20250614_132812.jpg
|
|
Attachment 29: 20250614_130553.jpg
|
|
Attachment 30: 20250614_132820.jpg
|
|
|
704
|
Fri Jun 13 12:42:39 2025 |
CC, TD | Friday 13 June 2025 |
13.42 ASIC settings 2025Jun12-13.53.04
*all* FEE64s slow comparator 0x64
all fast disc outputs disabled
p+n FEE64s waveform threshold 7000, n+n FEE64s 9000
CC grounding ribbon cable heavy duty braid to adaptor PCB and AIDA support assembly ground
'top' p+n FEE64s and snout to be completed
16.00 DSSSD bias & leakage current - attachment 1
FEE64 temps OK - attachment 2
All system wide checks OK *except* WR decoder status aida02 and aida06 - attachment 3
WR timestamps OK - attachment 4
ADC data item stats - attachment 5
per FEE64 Rate spectra - attachment 6
per p+n FEE64 1.8.L spectra - attachment 7
aida09 pulser peak width 117 ch FWHM - no change since yesterday
per FEE64 1.8.W spectra - 20us FSR - attachments 8-10
|
Attachment 1: Screenshot_from_2025-06-13_15-48-17.png
|
|
Attachment 2: Screenshot_from_2025-06-13_15-48-34.png
|
|
Attachment 3: Screenshot_from_2025-06-13_15-48-56.png
|
|
Attachment 4: Screenshot_from_2025-06-13_15-49-36.png
|
|
Attachment 5: Screenshot_from_2025-06-13_15-55-42.png
|
|
Attachment 6: Screenshot_from_2025-06-13_15-56-55.png
|
|
Attachment 7: Screenshot_from_2025-06-13_15-58-10.png
|
|
Attachment 8: Screenshot_from_2025-06-13_15-58-48.png
|
|
Attachment 9: Screenshot_from_2025-06-13_15-59-12.png
|
|
Attachment 10: Screenshot_from_2025-06-13_16-00-09.png
|
|
|
703
|
Thu Jun 12 13:15:25 2025 |
GB, CC, NK, MP, TD | Thursday 12 June 2025 |
EMC tests with NK (Orsay)
Stack configuration (upstream->downstream)
bPlas
AIDA DSSSD #0
AIDA DSSSD #1
bPlas
3x MSL type BB7(DS)-1000 (1x aida10, 2x Mesytec preamplifiers)
AIDA DSSSD #0 bias -100V leakage current -13.23uA
AIDA DSSSD #1 bias -100V leakage current -9.68uA
BNC PB-5 settings
Amplitude 1.0V
Attenuator x1
Frequency 25Hz
Polarity +
tau_d 1ms
Tail pulse
14.39 per p+n FEE64 1.8.W spectra - 20us FSR - attachment 1
per p+n FEE64 1.8.L spectra - attachment 2
Pulser peak widths ch FWHM
DSSSD #0 (DSSSD - FEE64 cables with heavy duty braid - electrically connected to ground of adaptor PCB and internally connected to ground within snout)
9 1 5
120 201 21
15 3 12
114 180 broad
DSSSD #1 (DSSSD - FEE64 cables with mesh - currently not connected i.e. floating to adaptor PCB and internally connected to ground within snout)
10 14 13
- 22 374
11 7 16
broad 417 20
Pulser peak widths c. 20 ch FWHM probably indicate cable from DSSSD *not* connected to FEE64 adaptor PCB
|
Attachment 1: Screenshot_from_2025-06-12_14-39-35.png
|
|
Attachment 2: Screenshot_from_2025-06-12_14-33-26.png
|
|
|
702
|
Tue Apr 8 08:52:39 2025 |
TD | AIDA grounding |
AIDA DSSSDs and FEE64-DSSSD cabling are electrically isolated (by design) from snout, mounting rods and support assembly.
FEE64-DSSSD ribbon cables screened by 3M 1245 Cu foil, drain wire to FEE64 adaptor PCB
AIDA FEE64s are electrically isolated (by design) from the AIDA support frame and each other.
BNC PB-5 test signal
daisy chained to FEE64 adaptor PCBs via screened RG174 cable/Lemo 00-250
CAEN N1419ET DSSSD bias
daisy chained to 1x p+n junction FEE64 adaptor PCB/Si wafer via screened RG174 cable/Lemo 00-250
CAEN N1419ET outputs floating, locally grounded by 1x n+n Ohmic FEE64 adaptor PCB link/DSSSD
AIDA FEE64s are connected to the DESPEC 19" rack
power (AIDA FEE64 PSUs),
timestamp (AIDA NIM MACB modules),
system console (via serial-USB cables to USB hubs),
RJ45 network cables (24 port Gbit network switch)
AIDA PSU PowerStax MS1U-6C-222233-01 - see attachments 1-2
PSU outputs V+/V- and common
no direct ground connection
AIDA MACB
HDMI cabling MACB-FEE64 is screened and shield is grounded
system console
?
RJ45 network cables are coupled by ferrite beads to FEE64 PCB and network switch
no direct ground connection |
Attachment 1: powerstax-ms1u_instructionmanua.pdf
|
|
Attachment 2: 20250408_095624.jpg
|
|
|
701
|
Tue Mar 11 11:53:18 2025 |
TD | Monday 10 March |
18.30 AIDA powered up for brief test
DSSSD bias & leakage current OK - attachment 1
FEE64 temperatures OK - attachment 2
ADC data item stats - attachment 3
ASIC settings at power up - slow comparator 0x64
per p+n FEE64 1.8.L spectra - attachment 4
pulser peak width aida9 55 ch FWHM (39keV FWHm), aida15 53 ch FWHM (37keV FWHM)
p+n FEE64 aida15 1.8.W spectra - 20us FSR - attachments 5-6
saved *.L, *.H, *.W spectra for aida15 - attachments 7-11
*.W spectra - 20us, 200us, 2ms & 20ms FSR
19.27 DAQ STOP
DSSSD bias OFF
FEE64 power OFF |
Attachment 1: Screenshot_from_2025-03-10_18-41-32.png
|
|
Attachment 2: Screenshot_from_2025-03-10_18-42-02.png
|
|
Attachment 3: Screenshot_from_2025-03-10_18-42-33.png
|
|
Attachment 4: Screenshot_from_2025-03-10_18-43-07.png
|
|
Attachment 5: Screenshot_from_2025-03-10_18-48-03.png
|
|
Attachment 6: Screenshot_from_2025-03-10_18-48-39.png
|
|
Attachment 7: 2025Mar10-17.59.58.tar.gz
|
Attachment 8: 2025Mar10-18.05.01.tar.gz
|
Attachment 9: 2025Mar10-18.06.29.tar.gz
|
Attachment 10: 2025Mar10-18.12.03.tar.gz
|
Attachment 11: 2025Mar10-18.17.55.tar.gz
|
|
700
|
Sat Feb 22 12:35:38 2025 |
TD | Offline analysis data files R9_85-R9_199 (84Mo setting) |
Start 00:43 22.2.25 https://elog.gsi.de/despec/G-24-00302/57
AIDA data file R9_85
Converting hexadecimal timestamp to decimal: 1740181266259754800
Assuming that this timestamp is in nanoseconds (1 billionth of a second):
GMT: Friday, February 21, 2025 11:41:06.259 PM
Your time zone: Friday, February 21, 2025 11:41:06.259 PM GMT+00:00
End 12:56 22.2.25 https://elog.gsi.de/despec/G-24-00302/85 (start of next degrader setting)
AIDA data file R9_199
Converting hexadecimal timestamp to decimal: 1740224934731157800
Assuming that this timestamp is in nanoseconds (1 billionth of a second):
GMT: Saturday, February 22, 2025 11:48:54.731 AM
Your time zone: Saturday, February 22, 2025 11:48:54.731 AM GMT+00:00
Analysis data files FEB25/R9_85 and FEB25/R9_199
- no timewarps
- deadtime aida05 c. 37% and 39% due to high SC41 scaler input to MACB - issue subsequently fixed
- deadtime aida04 c. 4%, all other FEE64s <<1%
FEE64 configuration
FEE64 a b c
g h
d e f
a b c d e f g h
DSSSD#1 15 3 12 9 1 5 2 4
n+n Ohmic FEE64s 2, 4
Data analysis assumes
- all LEC ADC data channels with valid ADC offset included (507 of 512 channels)
LEC calibration ADC offset only
- no clustering
- no multiplex timestamp correction
- no p+n junction side - n+n Ohmic side correlation time gates
- FEE64 *not* DSSSD strip ordering
- hardware - slow comparator setting p+n junction FEE64s 100keV, n+n Ohmic FEE64s 150keV
- LEC energy difference +/- 168keV
- HEC energy difference +/- 1.68GeV
- valid LEC events
p+n junction side multiplicity = 1 and n+n Ohmic side multiplicity = 1
151keV < LEC energy < 1000keV
to select candidate beta events
standalone analysis of AIDA data, no downstream veto detector
- valid HEC events
p+n junction side multiplicity > 0 and n+n Ohmic side multiplicity > 0
(x,y) strips corresponding to maximum energy
p+n junction and n+n Ohmic side HEC
- HEC veto
not available - only 1x AIDA DSSSD installed
- per pixel implant-decay correlations
- end of event
difference in WR timestamp between successive ADC data items > 2500 and overall event length < 33us
per FEE64 LEC ADC data items 268ms/channel - attachments 3-5
- all
- 150keV < energy < 1500keV
- energy > 1500keV
absence of high instantaneous rates on spill cf. S181, S100, S505 etc
spill structure visible for energies > 1500keV - probably to be expected as majority of such events should be light ions
per FEE64 HEC ADC data items 268ms/channel - attachments 6-8
- all
- 100MeV < energy < 1000MeV
- energy > 1000MeV
Implant & decay event rates 262us/channel - attachment 9
LEC m_p versus m_n - attachment 10
LEC e_p versus e_n - 20keV/channel - attachment 11
HEC x strip versus y strip - attachment 12
- HEC-LEC implant decay time difference <1s
- HEC-LEC implant decay time difference <100s
shows x-y window used to select 82Nb events
HEC m_p versus m_n - attachment 13
HEC e_p versus e_n - 20MeV/channel - attachment 14
HEC-LEC implant-decay time difference (4ms/channel) versus - attachment 15
- HEC energy
- LEC energy
- x & y strip
x strips 130 & 136 disabled
HEC & LEC p strip - n strip time difference (2us/channel, offset=2000 channels) - attachment 16
HEC E (20MeV/channel) versus implant-decay time difference (4.194ms/channel) - attachment 17
LEC E (20keV/channel) versus implant-decay time difference (4.194ms/channel) - attachment 18
LEC e_p - e_n (5.6keV/channel) versus implant-decay time difference (4.194ms/channel) - attachment 19
HEC x & y strip versus implant-decay time difference (4.194ms/channel) - attachment 20
HEC-LEC implant-decay time difference (8.389ms/channel) for candidate 82Nb events - attachment 21
- blue - forward
- cyan - backward
Note
- no FRS PID
- no HEC dE
- no HEC veto
- no HEC energy gates - assume all events within x-y window *stop* in AIDA DSSSD - 82Nb events known to overlap in x-y with (longer-lived, more numerous) 83Nb events
- no front-back time difference
- no clustering
- *all* LEC channels with valid ADC offsets (507 of 512) included *except* 2x strips 130 & 136
HEC-LEC implant-decay time difference (8.389ms/channel) for candidate 82Nb events - attachment 22
Weighted least squares fit channels 1-12 half life 55(9)ms cf. NNDC 50.0(3)ms. |
Attachment 1: R9_85.txt
|
*** TDR format 3.3.0 analyser - TD - May 2021
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 143503687 ( 365856.8 Hz)
Other data format: 118416315 ( 301897.6 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 2560 ( 6.5 Hz)
RESUME: 2560 ( 6.5 Hz)
SYNC100: 33461 ( 85.3 Hz)
WR48-63: 33461 ( 85.3 Hz)
FEE64 disc: 326756 ( 833.1 Hz)
MBS info: 118017517 ( 300880.9 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 29285 ( 74.7 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
WR48-63: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 392.240 s
FEE elapsed dead time(s) elapsed idle time(s)
0 0.000 0.000
1 0.069 0.000
2 0.000 0.000
3 17.209 0.000
4 146.817 0.000
5 0.000 0.000
6 0.000 0.000
7 0.000 0.000
8 0.000 0.000
9 0.009 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.000 0.000
15 0.000 0.000
16 0.000 0.000
17 0.000 0.000
18 0.000 0.000
19 0.000 0.000
20 0.000 0.000
21 0.000 0.000
22 0.000 0.000
23 0.000 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 WR48-63 Disc MBS Other HEC Data
0 7002448 45530 0 0 0 0 930 930 31901 11769 0 2888
1 22874309 77583 0 0 18 18 3036 3036 71475 0 0 7512
2 6498360 4555402 0 0 0 0 1475 1475 34629 4517823 0 3971
3 82625693 69682 0 0 1306 1306 10819 10819 45432 0 0 3669
4 4358474 109462549 0 0 1235 1235 14045 14045 2695 109429294 0 206
5 0 0 0 0 0 0 0 0 0 0 0 0
6 88 0 0 0 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0 0 0 0 0
8 2927664 19415 0 0 0 0 391 391 18633 0 0 4389
9 14346055 3938106 0 0 1 1 2392 2392 18452 3914868 0 1270
10 128 0 0 0 0 0 0 0 0 0 0 0
11 1956985 169485 0 0 0 0 257 257 25208 143763 0 3888
12 212 0 0 0 0 0 0 0 0 0 0 0
13 55 0 0 0 0 0 0 0 0 0 0 0
14 913148 78563 0 0 0 0 116 116 78331 0 0 1492
15 68 0 0 0 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 WR48-63 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0
*** Program elapsed time: 24.117s ( 1326.854 blocks/s, 82.928 Mb/s)
|
Attachment 2: R9_199.txt
|
*** TDR format 3.3.0 analyser - TD - May 2021
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 154723223 ( 435714.6 Hz)
Other data format: 107196777 ( 301875.8 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 2462 ( 6.9 Hz)
RESUME: 2462 ( 6.9 Hz)
SYNC100: 33323 ( 93.8 Hz)
WR48-63: 33323 ( 93.8 Hz)
FEE64 disc: 288355 ( 812.0 Hz)
MBS info: 106836852 ( 300862.3 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 32530 ( 91.6 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
WR48-63: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 355.102 s
FEE elapsed dead time(s) elapsed idle time(s)
0 0.008 0.000
1 0.147 0.000
2 0.000 0.000
3 21.597 0.000
4 136.749 0.000
5 0.000 0.000
6 0.000 0.000
7 0.000 0.000
8 0.000 0.000
9 0.006 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.000 0.000
15 0.000 0.000
16 0.000 0.000
17 0.000 0.000
18 0.000 0.000
19 0.000 0.000
20 0.000 0.000
21 0.000 0.000
22 0.000 0.000
23 0.000 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 WR48-63 Disc MBS Other HEC Data
0 9317141 49848 0 0 6 6 1239 1239 36708 10650 0 3256
1 27128444 89326 0 0 31 31 3596 3596 82072 0 0 8340
2 7611251 4365052 0 0 0 0 1569 1569 37972 4323942 0 4609
3 84626002 75259 0 0 1316 1316 10898 10898 50831 0 0 3978
4 4974948 98704420 0 0 1107 1107 12783 12783 2668 98673972 0 187
5 0 0 0 0 0 0 0 0 0 0 0 0
6 122 0 0 0 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0 0 0 0 0
8 3383262 22113 0 0 0 0 436 436 21241 0 0 4811
9 14397933 3689217 0 0 2 2 2371 2371 21039 3663432 0 1355
10 1 0 0 0 0 0 0 0 0 0 0 0
11 2194427 194484 0 0 0 0 298 298 29032 164856 0 4304
12 140 0 0 0 0 0 0 0 0 0 0 0
13 260 0 0 0 0 0 0 0 0 0 0 0
14 1088899 7058 0 0 0 0 133 133 6792 0 0 1690
15 393 0 0 0 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 WR48-63 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0
*** Program elapsed time: 26.438s ( 1210.402 blocks/s, 75.650 Mb/s)
|
Attachment 3: Screenshot_from_2025-03-05_10-04-30.png
|
|
Attachment 4: Screenshot_from_2025-03-05_10-04-55.png
|
|
Attachment 5: Screenshot_from_2025-03-05_10-05-29.png
|
|
Attachment 6: Screenshot_from_2025-03-05_10-07-35.png
|
|
Attachment 7: Screenshot_from_2025-03-05_10-07-56.png
|
|
Attachment 8: Screenshot_from_2025-03-05_10-08-29.png
|
|
Attachment 9: Screenshot_from_2025-03-05_10-09-24.png
|
|
Attachment 10: Screenshot_from_2025-03-05_10-10-29.png
|
|
Attachment 11: Screenshot_from_2025-03-05_10-11-17.png
|
|
Attachment 12: Screenshot_from_2025-03-05_10-12-05.png
|
|
Attachment 13: Screenshot_from_2025-03-05_10-12-35.png
|
|
Attachment 14: Screenshot_from_2025-03-05_10-13-38.png
|
|
Attachment 15: Screenshot_from_2025-03-05_10-14-59.png
|
|
Attachment 16: Screenshot_from_2025-03-05_10-15-51.png
|
|
Attachment 17: Screenshot_from_2025-03-08_09-11-40.png
|
|
Attachment 18: Screenshot_from_2025-03-08_09-11-58.png
|
|
Attachment 19: Screenshot_from_2025-03-08_09-13-07.png
|
|
Attachment 20: Screenshot_from_2025-03-08_14-01-50.png
|
|
Attachment 21: Screenshot_from_2025-03-08_12-21-22.png
|
|
Attachment 22: 82Nb.png
|
|
|
699
|
Thu Feb 20 17:06:42 2025 |
JB, CC, TD,MP | WR error for aida 13,14,15,16 |
WR timestamp errors resolved after reseating the HDMI cables to the MACB |