 Sat Nov 11 17:08:50 2017, RG, DK, CL, TD, AM, MD, Run 96
|
Header: Continue with 4.0 MeV/u Empty Frame
Ender:
====================================================
|
|
Sat Nov 11 15:17:24 2017, CLW, PJW, RG, TD, MD, DK, Run 95
|
Header: Continue with 4.0 MeV/u on Carbon after laser cleaning
Ender:
====================================================
|
|
Sat Nov 11 14:15:12 2017, CLW, PJW, RG, Run94
|
Header: 3.99 MeV/u and C_25.
Ender: We stop because the lasers are being cleaned, and we saw the scalars drop. See Comment below.
====================================================
|
|
Sat Nov 11 12:16:28 2017, CLW, PJW, RG, Run 93
|
Header: 3.99 MeV/u and CH2_30+25. Beam is back
Ender:
|
|
Sat Nov 11 11:21:22 2017, CLW, PJW, RG, Run 92
|
Header: 3.99 MeV/u and CH2_30+25. Beam is back
Ender:
|
|
Sat Nov 11 09:20:56 2017, CLW, MD, PJW, Run 91
|
Header: 3.99 MeV/u and CH2_30+25. Beam is back
Ender:
|
|
Sat Nov 11 07:45:34 2017, Claudia, Checking Laser quality
|
There is an option to see when the beam is gone if it is due to lasers or due to the accelerator.
- window next to proton requestion switch
- put middle faraday cup in |
Sat Nov 11 07:44:16 2017, MD, CLW, PJW, Run 90 
|
Header: 3.99 MeV/u and CH2_30+25. Beam is back
Ender:
|
|
Sat Nov 11 06:57:14 2017, MD, CLW, PJW, Run 89
|
Header: 3.99 MeV/u and CH2_30+25. Continue after Laser update (cleaning), but still no real beam
Ender:
|
|
Sat Nov 11 05:49:00 2017, AM & MD, run 88
|
Header: 3.99 MeV/u and CH2_30+25.
Ender:
====================================================
|
|
Sat Nov 11 03:58:58 2017, MD, ASM, Run 87
|
Header: 3.99 MeV/u and CH2_30+25.
Ender:
|
|
Sat Nov 11 01:40:48 2017, MD, DMK, ASM, Run 86
|
Header: 3.99 MeV/u and CH2_30+25. Continue after reheat the primary target (GPS) between 02:20 and 02:30
Ender:
|
|
Sat Nov 11 00:24:19 2017, MD, ASM, DMK, Run 85
|
Header: 3.99 MeV/u and CH2_30+25.
Ender: primary target current (RED) down to 5V...
|
|
Sat Nov 11 00:01:41 2017, Daid. Mirco, Trigger and scalars for 4.0 MeV/u
|
Tom et al. tuned the trigger this evening, before we began the runs. (Run 82, or Run 83??)
===TRIGGER===
|
|
Fri Nov 10 21:59:05 2017, SL, MD, Run 84
|
Header: 3.99 MeV/u and CH2_30+25.
Ender:
====================================================
Run number : 84
Date : 10/11 to 11/11
Start
time : 23:03
Stop time : 01:22:11
Trigger rate (MIDAS) :
Blocks written : 48
——————————————————————————————
Run
Scalars (approx rates)
0- Ungated :
1- Gated :
2- dE :
3- E |
|
Fri Nov 10 20:30:57 2017, SL, Run 83
|
Header: 3.99 MeV/u and CH2_30+25.
Ender: Recompiling sort code.
====================================================
Run number : 83
Date :
10/11
Start time : 21:30
Stop time : 22:59
Trigger rate (MIDAS) :
Blocks written : 150
——————————————————————————————
Run |
|
Fri Nov 10 19:57:49 2017, SL, Run 82
|
Header: 3.99 MeV/u and CH2_30+25.
Ender:
====================================================
Run number : 82
Date : 10/11
Start time :
21:03
Stop time : 21:30
Trigger rate (MIDAS) :
Blocks written :
——————————————————————————————
Run
Scalars (approx rates)
0- Ungated :
1- Gated :
2- dE :
3- E |
|
Fri Nov 10 19:01:13 2017, SL, Run 81
|
Header: 3.99 MeV/u and CH2_30+25.
Ender: Stopped to check E hardware.
====================================================
Run number :
81
Date : 10/11
Start time : 20:20
Stop time : 20:50
Trigger rate (MIDAS) :
Blocks written : 70
——————————————————————————————
Run |
|
Fri Nov 10 16:32:19 2017, Claudia, RAL Amplitude Thresholds
|
| Thresholds of RAL amplifiers set to: dE 30mV; E 20 mV, HI 20 mV |
|
Fri Nov 10 14:48:22 2017, TD, Calibration 18x
|
ADC offsets calculated using data files R42-r47
|