ID |
Date |
Author |
Subject |
Text |
 |
356
|
Fri Nov 24 00:45:36 2017 |
AT | ur17b BRIKEN files | List of files in BRIKEN DAQ PC:
Experiment DA1702 (including the test with |
|
11
|
Sat May 2 19:32:08 2015 |
AE | transfer data AIDA->BRIKEN | A test program for online data transfer is
available in aidas1 PC at:
|
|
408
|
Mon Nov 5 09:59:36 2018 |
MW, KR | suspicious clover G7 temp sensor | We observed 6 pm LN2 filling of both clovers
on Monday Nov 5th.
D4 went full within reasonable |
|
414
|
Mon Nov 5 18:52:54 2018 |
MW, KR | suspicious clover G7 temp sensor |
|
|
139
|
Tue Nov 8 11:51:28 2016 |
Ale | spikes on some spectra | Some spectra show spikes or do not look normal.
This should be checked.
|
|
312
|
Sat May 27 04:46:55 2017 |
AIM | sources info | Here is the sunflower webpage with information
on the calibration sources:
|
|
177
|
Sat Nov 26 20:50:13 2016 |
GK, AT&AT | run 16-19 | ======= START =======
Date 2016/11/26
Start time : 17:21
|
 |
185
|
Sun Nov 27 23:14:49 2016 |
BRIKEN coll | run 036 | ======= START =======
Date 2016/11/27
Start time : 19:28
|
|
176
|
Sat Nov 26 20:48:16 2016 |
BRIKEN collaboration | run | ===== Start of measurements 41Al ====== |
|
187
|
Mon Nov 28 05:59:28 2016 |
briken | run |
======= START =======
Date 2016/11/28
Start
time : 11:12
BRIKEN run : 056
Daq Conf.
File : 161128Conf_BrikenFull.xlsx
DLT File |
|
349
|
Wed Oct 25 17:49:09 2017 |
JT, AM, NB, DS, DM, AT | pulser in CLOVERS | G7 pulser weird behavior
|
|
125
|
Mon Nov 7 05:36:20 2016 |
Ale | new calibration for F11 | new calibration for F11
Using a value of 70 MeV energy loss and the |
|
8
|
Mon Apr 27 04:40:43 2015 |
G. Kiss, J. Agramunt | neutron background at Eurica | Based on an about 8h long background measurement,
the neutron background at the Eurica site
was found to be about 0.006 neutron / sec |
|
346
|
Tue Oct 24 03:08:23 2017 |
RG, RY, MS, JA, RCF, SG, AT | light pulser YSO | light pulser measurement
SN's pulse generator 20ns width |
 |
Draft
|
Mon May 29 05:40:49 2017 |
K. Matsui | energy loss at logn | |
|
92
|
Mon Oct 17 05:21:46 2016 |
Phong, Liu J J | dE detector position and output signal from preamplifier | dE detector is mounted onto the back side
of the shielding (attached photo: dE_position.JPG)
|
  |
364
|
Thu Oct 18 03:11:56 2018 |
AT & AT | bck meas | 18/10/18 START: 10:54
18/10/1X STOP: 14:02
|
|
382
|
Mon Oct 22 16:54:10 2018 |
AT & AT | background, low threshold, No Pulser | 18/10/23 START: 00:53
18/10/24 STOP: 10:12
Background measurements. Checking noise!
|
|
379
|
Mon Oct 22 03:11:32 2018 |
AT & AT | background, high threshold, Pulser UPC | 18/10/22 START: 11:13
18/10/22 STOP: 15:59
Background measurements. Checking noise!
|
|
378
|
Sun Oct 21 15:16:40 2018 |
AT & AT | background, high threshold, Pulser RIKEN+ORNL | 18/10/21 START: 23:16
18/10/22 STOP: 11:06
Background measurements. Checking noise!
|
|