| ID |
Date |
Author |
Subject |
|
370
|
Fri Oct 19 10:27:22 2018 |
AT & AT | 252Cf, z=0cm, no clovers (***** CHECK DATA) |
18/10/19 START: 18:25
18/10/19 STOP: 19:19
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
DLT:
181019_1825_252Cf_z0cm_042.dlt
Comment:
- 252Cf source placed at the center using cardboard piece, z=0cm, source axis perpendicular to the beam axis,
rotated 90deg with respect to previous measurements.
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
** A high dead time has been observed in the online (50%). The system is completely restarted for checking.
***** CHECK DATA, CHANGE OF CONFIGURATION WITHOUT RESTARTING GASIFIC70 |
|
371
|
Fri Oct 19 11:28:31 2018 |
AT & AT | 252Cf, z=0cm, no clovers, test online dead time |
During previous measurement a high dead time in the online was observed (50%). after restarting the crates and
the GASIFIC70, we resume the measurement. The conf file is
181016_Conf_BrikenFull.xlsx
18/10/19 START: 18:30
18/10/19 STOP: 19:32
ROOT file:181019_1926_252Cf_test.root
DLT:
181019_1926_252Cf_test_043.dlt
-------------------------------------
DACQ IS RESTARTED
The conf file is
181016_Conf_BrikenFull_2153_test_thr.xlsx
18/10/19 START: 19:34
18/10/19 STOP:
ROOT file: 181019_1934_252Cf_test.root
DLT:
181019_1934_252Cf_test_044.dlt
*** No significant differences between the two measurements.
Comment:
- 252Cf source placed at the center using cardboard piece, z=0cm, source axis perpendicular to the beam axis,
rotated 90deg with respect to previous measurements.
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
372
|
Fri Oct 19 11:45:12 2018 |
AT & AT | 252Cf, z=0cm, no clovers |
18/10/19 START: 19:46
18/10/19 STOP: 23:33
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181019_1946_252Cf_z0cm_2333.root
DLT:
181019_1946_252Cf_z0cm_045.dlt
181019_1946_252Cf_z0cm_046.dlt
181019_1946_252Cf_z0cm_047.dlt
181019_1946_252Cf_z0cm_048.dlt
Comment:
- 252Cf source placed at the center using cardboard piece, z=0cm, source axis perpendicular to the beam axis,
rotated 90deg with respect to previous measurements.
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
373
|
Fri Oct 19 15:38:11 2018 |
AT & AT | 252Cf, z=0cm, no clovers, noise check individual tubes |
18/10/19 START: 23:39
18/10/20 STOP: 18:30
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file: 181019_2339_252Cf_z0cm_1830.root
DLT:
181019_2339_252Cf_z0cm_050.dlt
181019_2339_252Cf_z0cm_051.dlt
181019_2339_252Cf_z0cm_052.dlt
181019_2339_252Cf_z0cm_053.dlt
181019_2339_252Cf_z0cm_054.dlt
181019_2339_252Cf_z0cm_055.dlt
181019_2339_252Cf_z0cm_056.dlt
181019_2339_252Cf_z0cm_057.dlt
181019_2339_252Cf_z0cm_058.dlt
181019_2339_252Cf_z0cm_059.dlt
181019_2339_252Cf_z0cm_060.dlt
181019_2339_252Cf_z0cm_061.dlt
181019_2339_252Cf_z0cm_062.dlt
181019_2339_252Cf_z0cm_063.dlt
181019_2339_252Cf_z0cm_064.dlt
181019_2339_252Cf_z0cm_065.dlt
181019_2339_252Cf_z0cm_066.dlt
Comment:
- 252Cf source placed at the center using cardboard piece, z=0cm, source axis parallel to the beam axis.
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
Noise check:
- He032, He034, He036, He038 have noise peak @ 15 keV (black = He032, red = He034, green = He036, blue = He038).
Tubes He031, 33,35 and 37 have not this peak. |
| Attachment 1: Screenshot_from_2018-10-20_18-45-17.png
|
|
|
374
|
Sun Oct 21 03:19:54 2018 |
AT & AT | background, high threshold |
18/10/20 START: 20:30 approx
18/10/21 STOP: 11:20
** Configuration file:
181016_Conf_BrikenFull.xlsx
ROOT file:
181020_2030_bckgn_pulser_highThr.root
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
375
|
Sun Oct 21 06:04:43 2018 |
AT & AT | background, high threshold |
18/10/21 START: 14:10
18/10/21 STOP: 16:41
Background measurements. Checking noise!
Pulser is connected to all preamps.
** Configuration file:
181016_Conf_BrikenFull.xlsx
ROOT file:
181021_1410_bckgn_pulser_highThr.root
DLT files:
181021_1410_bckgn_pulser_highThr_070.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
| Attachment 1: 181021_1410_bckgn_pulser_highThr.png
|
|
|
376
|
Sun Oct 21 08:58:23 2018 |
AT & AT | background, high threshold, NO pulser |
18/10/21 START: 16:58
18/10/21 STOP: 19:09
Background measurements. Checking noise!
Pulser is totally disconnected.
** Configuration file:
181016_Conf_BrikenFull.xlsx
ROOT file:
By mistake no online saved!
DLT files:
181021_1410_bckgn_NOpulser_highThr_071.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
377
|
Sun Oct 21 11:18:31 2018 |
AT & AT | Low threshold, NO pulser, 252Cf, z=0cm |
18/10/21 START: 19:21
18/10/21 STOP: 23:04
252Cf at z=0cm, source axis perpendicular to beam axis, typical orientation.
Pulser is totally disconnected.
Low threshold.
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181019_2339_252Cf_z0cm_NOpulser_2304.root
DLT files:
181019_2339_252Cf_z0cm_NOpulser_072.dlt
181019_2339_252Cf_z0cm_NOpulser_073.dlt
181019_2339_252Cf_z0cm_NOpulser_074.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
**** There is a mistake in the time stamp of the name of the files, it says 181019_2339, it should be
181021_1921. This issue is corrected in the offline files. |
|
378
|
Sun Oct 21 15:16:40 2018 |
AT & AT | background, high threshold, Pulser RIKEN+ORNL |
18/10/21 START: 23:16
18/10/22 STOP: 11:06
Background measurements. Checking noise!
Pulser is connected to RIKEN and ORNL tubes. UPC tubes WITHOUT pulser.
** Configuration file:
181016_Conf_BrikenFull.xlsx
ROOT file:
181020_2030_bckgn_pulserRikenOrnl_highThr_1106.root
DLT files:
181020_2030_bckgn_pulserRikenOrnl_highThr_075.dlt
181020_2030_bckgn_pulserRikenOrnl_highThr_076.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
379
|
Mon Oct 22 03:11:32 2018 |
AT & AT | background, high threshold, Pulser UPC |
18/10/22 START: 11:13
18/10/22 STOP: 15:59
Background measurements. Checking noise!
Pulser is connected to UPC tubes. RIKEN and ORNL tubes WITHOUT pulser.
** Configuration file:
181016_Conf_BrikenFull.xlsx
ROOT file:
181020_1113_bckgn_pulserUPC_highThr_1559.root
DLT files:
181020_1113_bckgn_pulserUPC_highThr_077.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
380
|
Mon Oct 22 08:15:52 2018 |
AT & AT | 252Cf, z=15cm, no clovers |
252Cf source placed using cardboard piece at z=15cm, source axis parallel to the beam axis.
18/10/22 START: 16:15
18/10/22 STOP: 19:37
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181022_1615_252Cf_z15cm_SourceParAxis_1937.root
DLT:
181022_1615_252Cf_z15cm_SourceParAxis_078.dlt
181022_1615_252Cf_z15cm_SourceParAxis_079.dlt
181022_1615_252Cf_z15cm_SourceParAxis_080.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
381
|
Mon Oct 22 11:42:50 2018 |
AT & AT | 252Cf, z=25cm, no clovers |
252Cf source placed using cardboard piece at z=25cm, source axis parallel upstream to the beam axis.
18/10/22 START: 19:44
18/10/22 STOP: 00:04
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181022_1944_252Cf_z25cm_SourceParAxis_0004.root
DLT:
181022_1944_252Cf_z25cm_SourceParAxis_081.dlt
181022_1944_252Cf_z25cm_SourceParAxis_082.dlt
181022_1944_252Cf_z25cm_SourceParAxis_083.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
382
|
Mon Oct 22 16:54:10 2018 |
AT & AT | background, low threshold, No Pulser |
18/10/23 START: 00:53
18/10/24 STOP: 10:12
Background measurements. Checking noise!
Pulser is totally disconnected.
** Configuration file:
181016_Conf_BrikenFull.xlsx
ROOT file:
181023_0053_Nopulser_bckgn_1012.root
DLT files:
181023_0053_Nopulser_bckgn_084.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
***** NO neutron signals are observed without pulser (?!). Online plot provided. |
| Attachment 1: 181023_0053_Nopulser_bckgn_1012.png
|
|
|
383
|
Wed Oct 24 03:49:01 2018 |
AT & AT | Low threshold, 252Cf, z=0cm |
252Cf at z=10cm, source axis perpendicular to beam axis, typical orientation.
Low threshold.
18/10/24 START: 11:50
18/10/24 STOP: 15:37
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1150_252Cf_z10cm_1537.root
DLT files:
181024_1150_252Cf_z10cm_085.dlt
181024_1150_252Cf_z10cm_086.dlt
181024_1150_252Cf_z10cm_087.dlt
181024_1150_252Cf_z10cm_088.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
384
|
Wed Oct 24 07:42:42 2018 |
AT & AT | Low threshold, 252Cf, z=10cm, source axis parallel |
252Cf at z=10cm, source axis parallel upstream to the beam.
Low threshold.
18/10/24 START: 15:44
18/10/24 STOP: 19:00
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1544_252Cf_z10cm_1900.root
DLT files:
181024_1544_252Cf_z10cm_089.dlt
181024_1544_252Cf_z10cm_090.dlt
181024_1544_252Cf_z10cm_091.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
385
|
Wed Oct 24 11:27:51 2018 |
AT & AT | Low threshold, 252Cf, z=10cm, source axis parallel |
252Cf at z=10cm, source axis parallel upstream to the beam.
Low threshold.
18/10/24 START: 15:44
18/10/24 STOP: 19:00
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1544_252Cf_z10cm_1900.root
DLT files:
181024_1544_252Cf_z10cm_089.dlt
181024_1544_252Cf_z10cm_090.dlt
181024_1544_252Cf_z10cm_091.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
******* AT: By mistake duplicated entry from 385. |
|
386
|
Wed Oct 24 11:28:42 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm |
252Cf at z=-25cm,ie 25 cm downstream, source axis perpendicular, typical orientation.
Low threshold.
18/10/24 START: 19:31
18/10/25 STOP: 00:01
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1930_252Cf_zm25cm_0001.root
DLT files:
181024_1930_252Cf_zm25cm_092.dlt
181024_1930_252Cf_zm25cm_093.dlt
181024_1930_252Cf_zm25cm_094.dlt
181024_1930_252Cf_zm25cm_095.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
387
|
Wed Oct 24 16:11:32 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm |
252Cf at z=-25cm,ie 25 cm downstream the beam, source axis parallel.
Low threshold.
18/10/24 START: 00:12
18/10/25 STOP: 08:42
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181025_0012_252Cf_zm25cm_0842.root
DLT files:
181025_0012_252Cf_zm25cm_096.dlt
181025_0012_252Cf_zm25cm_097.dlt
181025_0012_252Cf_zm25cm_098.dlt
181025_0012_252Cf_zm25cm_099.dlt
181025_0012_252Cf_zm25cm_100.dlt
181025_0012_252Cf_zm25cm_101.dlt
181025_0012_252Cf_zm25cm_102.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
388
|
Thu Oct 25 00:53:43 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm, Perpendicular 90deg |
252Cf at z=-25cm,ie 25 cm downstream the beam, source axis perpendicular at 90deg with respect to typical
orientation.
Low threshold.
18/10/25 START: 08:55
18/10/25 STOP: 12:05
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181025_0854_252Cf_zm25cm_1205.root
DLT files:
181025_0854_252Cf_zm25cm_103.dlt
181025_0854_252Cf_zm25cm_104.dlt
181025_0854_252Cf_zm25cm_105.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
389
|
Thu Oct 25 04:14:00 2018 |
AT & AT | Low threshold, 252Cf, z=25cm, Perpendicular 90deg |
252Cf at z=25cm,ie 25 cm upstream the beam, source axis perpendicular at 90deg with respect to typical
orientation.
Low threshold.
18/10/25 START: 12:13
18/10/25 STOP: 15:42
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181025_0213_252Cf_z25cm_1542.root
DLT files:
181025_0213_252Cf_z25cm_106.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
****** CHECK DATA, possible issue with the clock due to AIDA test. |
| Attachment 1: 181025_0213_252Cf_z25cm.png
|
|