| ID |
Date |
Author |
Subject |
Text |
 |
|
339
|
Sat Oct 21 17:30:23 2017 |
JA, ATD, JLT | Background measurement overnight | 22/10/2017
Start: 01:26
Run: 037
|
|
|
338
|
Sat Oct 21 17:14:55 2017 |
JA, ATD, JLT | 252Cf efficiency calibration | Measurement of BRIKEN neutron counter efficiency
252Cf source in the (approximately) center
Wasabi and D4 clover inserted. G7 on the |
|
|
337
|
Sat Oct 21 17:11:03 2017 |
JA, ATD, JLT | New Gasific configuration file | Configuration file saved on 22-Oct-2017 at
00:59
after increasing all the threshold in all |
|
|
336
|
Sat Oct 21 17:05:21 2017 |
JA,ATD, JLT | New DACQ hardware configuration | Configuration of BRIKEN DACQ hardware:
Detector->VME->ADC->Channel
|
|
|
335
|
Sat Oct 21 07:26:13 2017 |
NB, RY, BD, MS | Corrected Calibration D4 | K R G B
m 0.001558636 0.0006599344 0.0015311753 0.0015807021
b -0.6545742444 0.4330534066 2.001278013 1.0994163913
|
|
|
334
|
Sat Oct 21 04:18:17 2017 |
NB | Draft of Instructions for HV | Setup:
|
|
|
333
|
Fri Oct 20 08:27:05 2017 |
BC Rasco | Analysis Slides | Here are the ORNL/UTK BRIKEN analysis slides
presented by BC Rasco on 2017/10/20.
|
|
|
332
|
Fri Oct 20 05:33:11 2017 |
KR, NB, SG, RY, JL, AT: | Calibration and Resolution of D4 (after Repair) | Green and Red channels were repaired by
crimping and securing the grounding of the
cables and fixing the cables securely to |
|
|
331
|
Wed Oct 18 08:46:23 2017 |
NB, SG, AT, JL | Clover G7 resolution | G7 clover was on the stand
Source: 152Eu
File: 171018_1627_152Eu_G7.root
|
|
|
330
|
Mon Oct 16 05:52:14 2017 |
BRIKEN collaboration | START preparation | We start to check every thing for the coming
run
|
|
|
329
|
Thu Jun 15 10:07:56 2017 |
BRIKEN collaboration | Gamma calibrations | Clover calibrations.
- Datafiles are located in the
dac computer, path: |
|
|
328
|
Thu Jun 15 03:40:17 2017 |
BRIKEN collaboration | Z-scaning 252Cf Jun17 | A scaning with 252Cf along the Z-axis of
the neutron detector is carried out. The
setup is similar to the scaning carried out |
|
|
327
|
Wed Jun 14 06:22:21 2017 |
Ariel, Liu, Go, Nishinmura | HV is off | To protect HPGe and 3He tubes from high
intentsity primary beam, HV of these detector
are off and the HPGe will be dismounted. |
|
|
326
|
Tue Jun 13 08:02:35 2017 |
briken team | 133Ba calibration | After experiment 133Ba calibration
Working directory: /data/1706FinalCalibrations
Configuration file: 170604_Conf_BrikenFull_AfterCrisis.xlsx |
|
|
325
|
Tue Jun 13 07:35:35 2017 |
briken team | 133Ba calibration | After experiment 133Ba calibration
Working directory: /data/1706FinalCalibrations
Configuration file: 170604_Conf_BrikenFull_AfterCrisis.xlsx |
|
|
324
|
Tue Jun 13 06:50:12 2017 |
Briken Colaboration | 152Eu calibration | After experiment 152Eu calibration
|
|
|
323
|
Tue Jun 13 05:18:07 2017 |
PV | How to install ELOG for BRIKEN campaign 2017a | Get ELOG software including entries for BRIKEN
campaign 2017a from mars computer:
|
|
|
322
|
Mon Jun 12 22:28:02 2017 |
Oscar | The SUSHIRO app guide | It's here...it's rough...but it hopefully
gets the job done |
|
|
321
|
Mon Jun 12 02:45:44 2017 |
Iris Dillmann AT | Setup detectors. Id of Ancillary@BRIKEN | Attachment 1: Setup detectors
Attachment 2: example of configuration file
(valid only for RIBF127). The Id of the ancillary |
|
|
320
|
Mon Jun 12 02:38:27 2017 |
JA AA AIM AT AT | VME crate & new configuration | Sun Jun 4 2017 11:16:45 VME crate #1 crashed
New configuration file of BRIKEN
|
|