 Mon Jun 16 10:46:11 2025, CB JM JG AK, Run82
|
| Background without beam while source is optimised. |
Wed May 29 16:46:21 2024, NP, AB, PM, Run7 - Measurements only with ion beam. 
|
18:19 Start or run 7: In beam has been optimzed up to now by Zoran and Claude. ~7E7 particles at injection. From now on, only the injection beamline
is optimized by Operators.
Detectors IN (left arm pot =18.86 mm, right arm pot = 19.80 mm) |
|
Sun Jun 8 10:05:30 2025, EM, PC, JM, Run57
|
11:06
Run during beam change. We will go down to 200 keV/u
All the checks are ok. |
|
Sun Jun 8 09:07:22 2025, EM, PC, JM, Run56
|
NOTE: RunR55 is missing
Run56: Background run with 250 keV/u. Target off using the usual procedure.
All checks ok! |
|
Wed May 29 08:10:32 2024, JM, Run4 - alpha background
|
09:00
R4 alpha background continues, currently R4_12
Temps OK, system checks unchanged from previous status (OK, aida16 clock and ADC issue) |
|
Fri May 30 20:06:48 2025, JM, CB, NP, Run35 8x
|
21:00
Run 35 started.
D+ beam deuterium target. D+ beam energy is 2 MeV/u. (beam calc calculation is 1.9211 MeV/u -> may be wrong cooler voltage, need to check |
|
Thu Feb 15 21:07:00 2024, JM, AB, AR, OF, Run33 - cooled beam on target 22x
|
22:27
Run 33 started cooled beam on target.
Detectors IN (left arm pot =36.5 mm, right arm pot = 70.49 mm) |
|
Thu Feb 15 12:40:52 2024, JM. CB, AR, AB, Run30 - uncooled beam on target 29x
|
Run started 13:40
Target density 4.3e11, Beam injection is ~1e7, Pressure in the ring is ~1e-10 mbar.
Detectors have been moved IN with servo motors only (left arm pot = 36.5 mm, right arm pot =37.7 mm |
|
Mon Jun 3 21:37:20 2024, CN, EM, CB, Run30
|
Beam energy = 3 MeV
Horizontal beam position = 7.0 mm, vertical beam position = 0.0 mm.
Beam intensity at inj ~ 2.5e7 |
|
Mon Feb 5 05:45:26 2024, CB TD, Run3 - end 47x
|
06.40 DAQ continues file G22-88/R3_42
DSSSD bias OK - attachment 1
|
|
Sun Feb 4 08:40:04 2024, CB TD, Run3 - contd 22x
|
09.30 DAQ continues file G22-88/R3_17
DSSSD bias OK - attachment 1
|
|
Thu Feb 15 10:39:50 2024, JM, JG, ML, AG, CB, Run29 - beam optimisation
|
11:27
Run 29 started. Beam energy is 1.3435 MeV/u with a cooler voltage of 751.3 V.
We observe significantly greater count rate for top right detector (DSSD#1) now that the beam energy has been lowered. ADC over range? Beam target |
|
Mon Jun 3 15:17:41 2024, CN, EM, CB, Run29
|
16:15
In the previous run while working on the target it was discovered that the valve was closed! Probaly this happened around 10 am, we are not sure.
The gas target inlet valve is open again, working on the target. |
|
Wed Feb 14 16:52:46 2024, JM, AR, CB, JG, Run28 - beam on target 42x
|
Beam energy - 1.361 MeV/u
17:12 |
|
Mon Jun 3 15:10:12 2024, CN, EM, CB, Run28
|
16:10
We start a new run after doing some test with the motor. Injection time is now a 6s, moving of the motors is working fine.
Merger OK, Tape server OK |
|
Sun Jun 2 22:46:47 2024, JM, EM, NP, Run24
|
23:47
Run 24 started - Beam on target
Beam energy is 1.5 MeV. |
|
Tue Feb 13 17:19:43 2024, JM, AR, NP, AB, RSS, Run22 - cooled beam on target (definitely maybe) 48x
|
18:05 We believe we have an overlap between the beam and the target. Run 22 started.
CARME detectors in with the servo ONLY. Left arm pot 36.5 mm, right arm pot 37.7 mm
Target density apporx 2e11 atoms/cm2. |
|
Mon May 26 08:56:56 2025, EM,LB, Run20 8x
|
Run 20 running
We start a new run since the laser guys will do some measurements.
Zoran will increase the beam intensity |
|
Mon Feb 12 01:40:48 2024, TD, JM, CB, AR, RSS, Run17 - Run20 49x
|
02.35 DAQ continues file G22-88/R17_30
|
|
Sun Feb 11 13:28:46 2024, JM, CB, TD, Run16 - beam on target 30x
|
13:37 Run started - no beam in the ring (One of the ring magnets was still on RED when it should have been set to green by HKR)
14:28 Beam ON - still observe beam halo on DSSD0 (Top left)
YR09 Vertical and horizontal offsets set to -9.0 mm |