AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  DESPEC, Page 20 of 35  ELOG logo
  ID Date Author Subject Text Attachments
  315   Thu May 13 23:58:05 2021 OHFriday 14th May 00:00 - 08:0000:00 OH Takes over.
 PULSER SETTINGS
---------------------------
 21x 
  314   Thu May 13 21:21:25 2021 Philippos and Marcsystem wide checksWide checks at Time 22:22 CET

Clock status test result: Passed
16, Failed 0
 13x 
  313   Thu May 13 19:52:36 2021 Philippos and MarcConnection problemAt 20:15, We lost connection with AnyDesk.

Liliana restarted Anydesk on the
AIDA DAQ PC. All seemed fine on AIDA DAQ
 2021-05-13_ucesb_scalers.png 
  312   Thu May 13 17:05:42 2021 Muneerah, MArcThu 13 May 04:00-00:0019:08 System Check

Rates from ucesb below 1 kHz

Atachment 1 Stats
 130521_1802_Stats.png130521_1802_Temp.png130521_1804_Voltages.png 
  311   Thu May 13 07:10:17 2021 CA, TDMay 13th 08:00 - 16:00 shift08:10 all system wide checks ok *except*

      all FEE64 modules fail ADC calibration
 34x 
  310   Thu May 13 00:51:40 2021 Muneerah and OHThu 13 May 00:00-08:0001:50 Beam on
The leakage current and the voltages been
monitered every half an hour and logged in
 7x 
  309   Wed May 12 18:53:38 2021 JSWed 12 20:00-00:0019:51 Shift change

Stats ok
 ucesb.pngbias1.pngScreenshot_2021-05-12_Statistics_aidas-gsi.pngScreenshot_2021-05-12_Temperature_and_status_scan_aidas-gsi.pngbias2.png 
  308   Wed May 12 15:03:10 2021 CB, OHWed 12 16:00-20:0016:00 Shift change

Statistics OK (attach 1)
 15x 
  307   Wed May 12 06:59:55 2021 OH, RDPWed 12 May 08:00-16:0008:00 While the rates appeared to have quietened
around 7am they are back to their previous
rate now.
 1dImplants.png1dImplants2.png512.png513.png 
  306   Wed May 12 02:07:59 2021 MA, BAWed 12 May 00:00-08:0003:12 System Check

attachment 1 : Current

attachment 2 : Temperature
 9x 
  305   Tue May 11 07:21:24 2021 OHTuesday 11 May08:20 System wide checks all ok except
 Base  Current  Difference
aida01 fault   0xc10c :   0xc10e :   2  
 210511_0823_Stats.png210511_0824_Temp.png210511_0825_Bias.png 
  304   Mon May 10 11:45:15 2021 NHConfusing behaviour of rates Testing the behaviour of powering down the
fast ADCs in aida01 (the hot FEE)
  
  303   Mon May 10 08:49:37 2021 TDMonday 10 May09.51 All system wide checks OK *except*

 21x 
  302   Sun May 9 19:29:23 2021 TDSunday 9 May   14x 
  301   Sat May 8 09:05:04 2021 TDSaturday 8 May
09.54 FEE64 temperatures OK - attachment
1
 27x 
  300   Fri May 7 19:47:54 2021 PJCSHowTo mitigate excessive temperature in an FEE64 After tests in the Daresbury T9 system.

Disabling the waveform ADCs in
an FEE64 which is running with the FPGA over
  
  299   Fri May 7 13:11:22 2021 NHFriday 7th May14:11 - Alpha has been running most of morning

Just saw rates in tape spike to 6 MB/s...
 elog_locks.pngelog_temps.pngelog_rates.pngelog_rates1.pngaida13.txt 
  298   Thu May 6 16:59:20 2021 TD, OHWednesday 6 May
18.09 NH has installed jumpers LK2-4 for
*all* adaptor PCBs
 13x 
  297   Wed May 5 20:10:16 2021 OHWednesday 5 May Alpha run21:10 After all of the works in S4 today the
noise in the system was considerably worse
      It was decided that before starting
 12x 
  296   Wed May 5 16:57:48 2021 TDTuesday 5 May
17.55 Grafana DSSSD bias & leakage current
- attachment 1
 Screenshot_2021-05-05_AIDA_Alerting_-_Grafana(1).png401.png 
ELOG V3.1.4-unknown