ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC, Page 14 of 36

Full | Summary | Threaded | Hide attachments

703 Entries

Goto page Previous 1, 2, 3 ... 13, 14, 15 ... 34, 35, 36 Next

Selected entries:

	ID	Date	Author	Subject
	453	Sat May 14 19:39:13 2022	BA, AA	Saturday 14 May
FEE64 module aida09 global clocks failed, 6 Clock status test result: Passed 13, Failed 1 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable FEE64 module aida02 failed FEE64 module aida06 failed FEE64 module aida09 failed FEE64 module aida10 failed FEE64 module aida13 failed Calibration test result: Passed 9, Failed 5 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module White Rabbit error counter test result: Passed 14, Failed 0 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR FPGA Timestamp error counter test result: Passed 14, Failed 0 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last
Attachment 1: Stat_2022-05-14_20-36-15.png

Attachment 2: Temp_2022-05-14_20-35-19.png

Attachment 3: Leakage_2022-05-14_20-33-32.png

	454	Sat May 14 21:34:11 2022	BA, AA	Saturday 14 May
FEE64 module aida09 global clocks failed, 6 Clock status test result: Passed 13, Failed 1 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable FEE64 module aida02 failed FEE64 module aida06 failed FEE64 module aida09 failed FEE64 module aida10 failed FEE64 module aida13 failed Calibration test result: Passed 9, Failed 5 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module White Rabbit error counter test result: Passed 14, Failed 0 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR FPGA Timestamp error counter test result: Passed 14, Failed 0 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last
Attachment 1: Rates_2022-05-14_22-32-44.png

Attachment 2: Temp_2022-05-14_22-31-37.png

Attachment 3: Leakg_2022-05-14_22-30-28.png

	705	Sat Jun 14 11:20:45 2025	TD	Saturday 14 June 2025
12.21 BNC PB-5 settings Amplitude 1.0V Attenuator x1 Frequency 22Hz Polarity + Tau_d 1ms Tail pulse Clamp ON Pulser output connected to p+n test daisy chain - n+n test daisy chain not connected per DSSSD green/yellow ground daisy chain was removed yesterday FEE64 adaptor PCB grounds connected by heavy duty braid wrapped in copper foil to AIDA support assembly frame Snout connected to AIDA support assembly frame by heavy duty braid bolted to frame and connected to snout by adhesive copper foil. DSSSD - FEE64 adaptor PCB cabling (cannot connect some ribbon cables because cable flipped and connector key now incorrectly oriented) aida10 aida14 aida13 ox xo oo aida09 aida01 aida05 oo oo xo aida06 aida02 aida04 aida08 Beam into screen ox oo oo oo aida15 aida03 aida12 oo oo ox aida11 aida07 aida16 ox oo xo o = connected x = not connected e.g. J1 J2 connected = oo, J1 only connected = ox Adaptor PCB top/component side E J1 R N I J2 Adaptor PCB LK1 fitted aida02, aida04, aida06, aida08 LK3 fitted aida03, aida07 DSSSD bias & leakage current - attachment 1 FEE64 temps OK - attachment 2 All system wide checks OK except WR decoder status aida02 - attachment 3 WR timestamps OK - attachment 4 ADC data item stats - attachment 5 per FEE64 Rate spectra - attachments 6-7 note ASICs with per channel rates of 22Hz (pulser) note all FEE64 slow comparator 0x64 ( note subsequently found ASIC #2-4 of a number of FEE64s were set to 0x0 ) per p+n FEE64 1.8.W spectra - 20us, 200us, 2ms and 20ms FSR - attachments 8-11 per p+n FEE64 1.8.W spectra - 20ms FSR - expanded y-scale = 2000 x 122uV/LSB = 0.244V FSR - attachment 12 per n+n FEE64 1.8.W spectra - 20ms, 2ms, 200us and 20us FSR - attachments 13-16 per p+n FEE64 1.8.L spectra - attachment 17 pulser peak widths aida05, aida14, aida16 c. 15-20 ch FWHM ( c. 10-15keV FWHM ) - cable from DSSSD not connected to adaptor PCB aida09 c. 120 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests all other FEE64s very noisy/unstable 14.45 Found some FEE64s with slow comparator 0x64 for ASIC#1 and 0x0 for ASICs #2-4 Slow comparator 0x64 now set for all ASICs of all FEE64s ASIC settings saved to 2025Jun14-15.00.09 ADC data item stats - attachment 18 per FEE64 Rate spectra - attachments 19-20 note ASICs with per channel rates of 22Hz (pulser) note all FEE64 slow comparator 0x64 note aida10 to be connected to MSL type BB7 - ignore for time being per FEE64 1.8.W spectra - 20us FSR - attachments 21-22 per p+n FEE64 1.8.L spectra - attachments 23-24 pulser peak widths aida05, aida14, aida16 c. 20 ch FWHM - cable from DSSSD not connected to adaptor PCB aida09 c. 120 ch FWHM - electronic noise c. 2x worse than configuration used for 2023/4 tests
Attachment 1: Screenshot_from_2025-06-14_12-20-58.png

Attachment 2: Screenshot_from_2025-06-14_12-21-03.png

Attachment 3: Screenshot_from_2025-06-14_12-22-20.png

Attachment 4: Screenshot_from_2025-06-14_12-22-49.png

Attachment 5: Screenshot_from_2025-06-14_12-23-31.png

Attachment 6: Screenshot_from_2025-06-14_12-23-39.png

Attachment 7: Screenshot_from_2025-06-14_12-23-49.png

Attachment 8: Screenshot_from_2025-06-14_12-34-18.png

Attachment 9: Screenshot_from_2025-06-14_12-35-16.png

Attachment 10: Screenshot_from_2025-06-14_12-35-53.png

Attachment 11: Screenshot_from_2025-06-14_12-36-22.png

Attachment 12: Screenshot_from_2025-06-14_12-36-48.png

Attachment 13: Screenshot_from_2025-06-14_12-41-57.png

Attachment 14: Screenshot_from_2025-06-14_12-42-22.png

Attachment 15: Screenshot_from_2025-06-14_12-42-45.png

Attachment 16: Screenshot_from_2025-06-14_12-43-05.png

Attachment 17: Screenshot_from_2025-06-14_12-47-43.png

Attachment 18: Screenshot_from_2025-06-14_14-46-16.png

Attachment 19: Screenshot_from_2025-06-14_14-46-24.png

Attachment 20: Screenshot_from_2025-06-14_14-46-42.png

Attachment 21: Screenshot_from_2025-06-14_14-47-05.png

Attachment 22: Screenshot_from_2025-06-14_14-47-24.png

Attachment 23: Screenshot_from_2025-06-14_14-55-39.png

Attachment 24: Screenshot_from_2025-06-14_14-55-57.png

Attachment 25: 20250614_130606.jpg

Attachment 26: 20250614_132851.jpg

Attachment 27: 20250614_132846.jpg

Attachment 28: 20250614_132812.jpg

Attachment 29: 20250614_130553.jpg

Attachment 30: 20250614_132820.jpg

	676	Sat Dec 14 11:52:42 2024	TD	Saturday 14 December
11:00 Visual inspection FEE64 adaptor PCBs & cabling aida02 ground from/to other FEE64s disconnected - re-connected aida01, aida09, aida12 - ground cabling screws to Lemo 00.250 housings loose - tightemed 12:50 Cooling water pressure & temperature OK - attachments 1 2 12:59 relay #1 power ON 13:01 relay #2 power ON 13:07 aida06 starts - panic during startup, automatic restart following 3 minute timeout DAQ reset, setup Check ASIC Control - browser tab timeout AIDA MIDAS HTTPD server console log - attachment 3 Appears to have restored ASIC settings 2024Dec13-17.02.45 saved yesterday aida10 ASICs #1 & #2 positive input, ASICs #3 & #4 negative input slow comparator 0xa (all p+n junction FEE64s and aida10), 0xf (n+n Ohmic FEE64s) 13:28 tar ASIC settings - attachment 4 [npg@aidas-gsi]$ cd /MIDAS/FEE_ASIC [npg@aidas-gsi FEE_ASIC]$ tar cvf /tmp/FEE_ASIC.tar . System wide checks Sync ASIC clocks - attachment 5 Clock, ADC calibration, WR decoder, FPGA timestamp, PLL checks - attachments 6-11 all OK except aida02 WR decoder error WR timestamps OK - attachment 12 FEE64 temps OK - attachment 13 13:45 Detector bias ON - attachment 14 BNC PB-5 pulser settings - attachment 15 Pulser connected to all p+n junction FEE64s except aida10 ADC, DISC, PAUSE and MBS correlation scaler stats - attachments 16-19 aida02 rate significantly lower than yesterday - https://elog.gsi.de/despec/Implantation+Stack/8 high rates observed for aida08, aida11 and aida14 - which are not connected to a DSSSD! per FEE64 Rate spectra - attachment 20 per p+n junction FEE64 1.8.L spectra - attachment 21 aida09 pulser peak width 56 ch FWHM = 39 keV FWHM consistent electronic noise for all p+n junction FEE64s (cabling+DSSSD) electronic noise of p+n junction FEE64s (cabling only) higher and more variable cf. https://elog.gsi.de/despec/Implantation+Stack/8 attachment 5 per p+n junction FEE64 1.8.W spectra 20us FSR - attachments 22-23 per n+n Ohmic FEE64 1.8.W spectra 20us FSR - attachment 24 WR timestamps OK - attachment 25 14:43 DAQ STOP Data transfer enabled Select Tape Server -> Next Run DAQ GO data file R3 Merger, Tape Server - attachments 26-27 data transfer rate c. 900k data items/s cf c. 300k data items/s yesterday https://elog.gsi.de/despec/Implantation+Stack/8 16:45 DAQ STOP Data transfer disabled Detector bias OFF FEE64 power OFF
Attachment 1: 20241214_125048.jpg

Attachment 2: 20241214_125104.jpg

Attachment 3: asic_check.log
executing do_PreReset ::MASTERTS namespace already exists done executing do_PreReset executing do_PostSetup done executing do_PostSetup ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida01 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida01 Second load re-activated at 0x0000401c for FEE aida01 Shifting out finished at 0 counts Read the control register from FEE aida01 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida01 Second load re-activated at 0x0000405c for FEE aida01 Shifting out finished at 0 counts Read the control register from FEE aida01 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida01 Second load re-activated at 0x0000409c for FEE aida01 Shifting out finished at 0 counts Read the control register from FEE aida01 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida01 Second load re-activated at 0x000040dc for FEE aida01 Shifting out finished at 0 counts Read the control register from FEE aida01 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida02 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida02 Second load re-activated at 0x0000401c for FEE aida02 Shifting out finished at 0 counts Read the control register from FEE aida02 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida02 Second load re-activated at 0x0000405c for FEE aida02 Shifting out finished at 0 counts Read the control register from FEE aida02 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida02 Second load re-activated at 0x0000409c for FEE aida02 Shifting out finished at 0 counts Read the control register from FEE aida02 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida02 Second load re-activated at 0x000040dc for FEE aida02 Shifting out finished at 0 counts Read the control register from FEE aida02 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida03 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida03 Second load re-activated at 0x0000401c for FEE aida03 Shifting out finished at 0 counts Read the control register from FEE aida03 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida03 Second load re-activated at 0x0000405c for FEE aida03 Shifting out finished at 0 counts Read the control register from FEE aida03 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida03 Second load re-activated at 0x0000409c for FEE aida03 Shifting out finished at 0 counts Read the control register from FEE aida03 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida03 Second load re-activated at 0x000040dc for FEE aida03 Shifting out finished at 0 counts Read the control register from FEE aida03 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida04 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida04 Second load re-activated at 0x0000401c for FEE aida04 Shifting out finished at 0 counts Read the control register from FEE aida04 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida04 Second load re-activated at 0x0000405c for FEE aida04 Shifting out finished at 0 counts Read the control register from FEE aida04 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida04 Second load re-activated at 0x0000409c for FEE aida04 Shifting out finished at 0 counts Read the control register from FEE aida04 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida04 Second load re-activated at 0x000040dc for FEE aida04 Shifting out finished at 0 counts Read the control register from FEE aida04 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida05 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida05 Second load re-activated at 0x0000401c for FEE aida05 Shifting out finished at 0 counts Read the control register from FEE aida05 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida05 Second load re-activated at 0x0000405c for FEE aida05 Shifting out finished at 0 counts Read the control register from FEE aida05 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida05 Second load re-activated at 0x0000409c for FEE aida05 Shifting out finished at 0 counts Read the control register from FEE aida05 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida05 Second load re-activated at 0x000040dc for FEE aida05 Shifting out finished at 0 counts Read the control register from FEE aida05 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida06 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida06 Second load re-activated at 0x0000401c for FEE aida06 Shifting out finished at 0 counts Read the control register from FEE aida06 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida06 Second load re-activated at 0x0000405c for FEE aida06 Shifting out finished at 0 counts Read the control register from FEE aida06 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida06 Second load re-activated at 0x0000409c for FEE aida06 Shifting out finished at 0 counts Read the control register from FEE aida06 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida06 Second load re-activated at 0x000040dc for FEE aida06 Shifting out finished at 0 counts Read the control register from FEE aida06 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida07 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida07 Second load re-activated at 0x0000401c for FEE aida07 Shifting out finished at 0 counts Read the control register from FEE aida07 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida07 Second load re-activated at 0x0000405c for FEE aida07 Shifting out finished at 0 counts Read the control register from FEE aida07 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida07 Second load re-activated at 0x0000409c for FEE aida07 Shifting out finished at 0 counts Read the control register from FEE aida07 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida07 Second load re-activated at 0x000040dc for FEE aida07 Shifting out finished at 0 counts Read the control register from FEE aida07 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida08 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida08 Second load re-activated at 0x0000401c for FEE aida08 Shifting out finished at 0 counts Read the control register from FEE aida08 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida08 Second load re-activated at 0x0000405c for FEE aida08 Shifting out finished at 0 counts Read the control register from FEE aida08 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida08 Second load re-activated at 0x0000409c for FEE aida08 Shifting out finished at 0 counts Read the control register from FEE aida08 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida08 Second load re-activated at 0x000040dc for FEE aida08 Shifting out finished at 0 counts Read the control register from FEE aida08 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida09 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida09 Second load re-activated at 0x0000401c for FEE aida09 Shifting out finished at 0 counts Read the control register from FEE aida09 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida09 Second load re-activated at 0x0000405c for FEE aida09 Shifting out finished at 0 counts Read the control register from FEE aida09 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida09 Second load re-activated at 0x0000409c for FEE aida09 Shifting out finished at 0 counts Read the control register from FEE aida09 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida09 Second load re-activated at 0x000040dc for FEE aida09 Shifting out finished at 0 counts Read the control register from FEE aida09 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida10 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida10 Second load re-activated at 0x0000401c for FEE aida10 Shifting out finished at 0 counts Read the control register from FEE aida10 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida10 Second load re-activated at 0x0000405c for FEE aida10 Shifting out finished at 0 counts Read the control register from FEE aida10 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida10 Second load re-activated at 0x0000409c for FEE aida10 Shifting out finished at 0 counts Read the control register from FEE aida10 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida10 Second load re-activated at 0x000040dc for FEE aida10 Shifting out finished at 0 counts Read the control register from FEE aida10 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida11 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida11 Second load re-activated at 0x0000401c for FEE aida11 Shifting out finished at 0 counts Read the control register from FEE aida11 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida11 Second load re-activated at 0x0000405c for FEE aida11 Shifting out finished at 0 counts Read the control register from FEE aida11 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida11 Second load re-activated at 0x0000409c for FEE aida11 Shifting out finished at 0 counts Read the control register from FEE aida11 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida11 Second load re-activated at 0x000040dc for FEE aida11 Shifting out finished at 0 counts Read the control register from FEE aida11 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida12 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida12 Second load re-activated at 0x0000401c for FEE aida12 Shifting out finished at 0 counts Read the control register from FEE aida12 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida12 Second load re-activated at 0x0000405c for FEE aida12 Shifting out finished at 0 counts Read the control register from FEE aida12 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida12 Second load re-activated at 0x0000409c for FEE aida12 Shifting out finished at 0 counts Read the control register from FEE aida12 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida12 Second load re-activated at 0x000040dc for FEE aida12 Shifting out finished at 0 counts Read the control register from FEE aida12 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida13 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida13 Second load re-activated at 0x0000401c for FEE aida13 Shifting out finished at 0 counts Read the control register from FEE aida13 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida13 Second load re-activated at 0x0000405c for FEE aida13 Shifting out finished at 0 counts Read the control register from FEE aida13 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida13 Second load re-activated at 0x0000409c for FEE aida13 Shifting out finished at 0 counts Read the control register from FEE aida13 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida13 Second load re-activated at 0x000040dc for FEE aida13 Shifting out finished at 0 counts Read the control register from FEE aida13 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida14 checking asic 1 Loaded ASIC 1 at 0x0000401c for FEE aida14 Second load re-activated at 0x0000401c for FEE aida14 Shifting out finished at 0 counts Read the control register from FEE aida14 ASIC 1 checking asic 2 Loaded ASIC 2 at 0x0000405c for FEE aida14 Second load re-activated at 0x0000405c for FEE aida14 Shifting out finished at 0 counts Read the control register from FEE aida14 ASIC 2 checking asic 3 Loaded ASIC 3 at 0x0000409c for FEE aida14 Second load re-activated at 0x0000409c for FEE aida14 Shifting out finished at 0 counts Read the control register from FEE aida14 ASIC 3 checking asic 4 Loaded ASIC 4 at 0x000040dc for FEE aida14 Second load re-activated at 0x000040dc for FEE aida14 Shifting out finished at 0 counts Read the control register from FEE aida14 ASIC 4 ASIC.tcl :- CheckASIC fetched file /MIDAS/FEE_ASIC => aida15 ... 379 more lines ...
Attachment 4: FEE_ASIC.tar
Attachment 5: Screenshot_from_2024-12-14_13-30-48.png

Attachment 6: Screenshot_from_2024-12-14_13-30-54.png

Attachment 7: Screenshot_from_2024-12-14_13-31-02.png

Attachment 8: Screenshot_from_2024-12-14_13-35-22.png

Attachment 9: Screenshot_from_2024-12-14_13-35-28.png

Attachment 10: Screenshot_from_2024-12-14_13-35-33.png

Attachment 11: Screenshot_from_2024-12-14_13-36-06.png

Attachment 12: Screenshot_from_2024-12-14_13-36-27.png

Attachment 13: Screenshot_from_2024-12-14_13-36-42.png

Attachment 14: Screenshot_from_2024-12-14_13-44-29.png

Attachment 15: Screenshot_from_2024-12-14_13-46-41.png

Attachment 16: Screenshot_from_2024-12-14_13-54-58.png

Attachment 17: Screenshot_from_2024-12-14_13-55-19.png

Attachment 18: Screenshot_from_2024-12-14_13-55-33.png

Attachment 19: Screenshot_from_2024-12-14_13-56-00.png

Attachment 20: Screenshot_from_2024-12-14_14-10-08.png

Attachment 21: Screenshot_from_2024-12-14_14-14-18.png

Attachment 22: Screenshot_from_2024-12-14_14-26-30.png

Attachment 23: Screenshot_from_2024-12-14_14-27-16.png

Attachment 24: Screenshot_from_2024-12-14_14-29-24.png

Attachment 25: Screenshot_from_2024-12-14_14-42-40.png

Attachment 26: Screenshot_from_2024-12-14_14-43-51.png

Attachment 27: Screenshot_from_2024-12-14_14-43-58.png

	196	Sat Mar 13 17:00:49 2021	TD	Saturday 13 March 18.00-00.00 UTC+1
18.00 DAQ continues OK - file R46_64 ASIC settings 2019Dec19-16.19.51 DSSSD#1 slow comparator 0xa DSSSD#2 slow comparator 0xa DSSSD#3 slow comparator 0xd BNC PB-5 Pulser Amplitude1.0V Attenuation x1 Frequency 2Hz tau_d 1ms - polarity Delay 250ns, tail pulse 18.02 System wide checks OK except FEE64 module aida09 global clocks failed, 6 Clock status test result: Passed 11, Failed 1 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable FEE64 module aida09 failed Calibration test result: Passed 11, Failed 1 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module FEE64 Temperatures OK - attachment 1 Good event statistics OK - attachment 2 Detector bias & leakage currents OK - attachment 3 Merger OK - 4.6M data items/s TapeServer OK - 16Mb/s All histograms zero'd 17.15 Most recent messages in merger server terminal session MERGE Data Link (2322): bad timestamp 6 3 0xc1b57e35 0x0ba1685c 0x0000ef3fbba1685c 0x166bef3fbba1685c 0x166bef3fbba1879c MERGE Data Link (2322): bad timestamp 6 3 0xc1a77dc2 0x0ba1702c 0x0000ef3fbba1702c 0x166bef3fbba1702c 0x166bef3fbba1879c MERGE Data Link (2322): bad timestamp 6 3 0xc1bf7f66 0x0ba1702c 0x0000ef3fbba1702c 0x166bef3fbba1702c 0x166bef3fbba1879c Transfer Error - : Broken pipe Error 32 1: send() failed: TCP transfer library version 4.0 1: TCP socket send buffer was 16384 - now 249856 1: TCP socket receive buffer was 87380 - now 249856 1: TCP socket created OK - now connecting to localhost port 10305 1: Connected to localhost port 10305 22.05 DAQ continues OK - file R46_168 FEE64 module aida09 global clocks failed, 6 Clock status test result: Passed 11, Failed 1 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable FEE64 module aida09 failed Calibration test result: Passed 11, Failed 1 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida07 fault 0x82a0 : 0x82a2 : 2 White Rabbit error counter test result: Passed 11, Failed 1 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida07 fault 0x2 : 0x3 : 1 FPGA Timestamp error counter test result: Passed 11, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 18 6 7 5 1 3 1 3 3 4 10 : 54856 aida02 : 19 6 4 3 4 4 2 3 3 3 6 : 36892 aida03 : 22 8 1 2 1 2 1 3 3 3 6 : 36136 aida04 : 24 8 4 2 1 3 2 4 1 4 15 : 73952 aida05 : 37 14 9 8 7 3 2 18 7 4 7 : 55252 aida06 : 28 12 16 4 4 2 1 4 3 2 5 : 31056 aida07 : 28 9 2 2 2 2 1 3 3 3 6 : 36248 aida08 : 21 12 6 4 3 4 2 3 3 3 6 : 36948 aida09 : 18 5 2 1 1 3 2 2 3 3 6 : 35952 aida10 : 17 8 4 5 3 3 1 3 3 3 6 : 36516 aida11 : 21 8 5 0 0 4 3 3 2 3 6 : 35812 aida12 : 13 11 3 3 FEE64 Temperatures OK - attachment 4 Good event statistics OK - attachment 5 Detector bias & leakage currents OK - attachment 6 Merger OK - 4.4M data items/s TapeServer OK - 15Mb/s 22.17 Rate spectra - attachments 7 & 8 p+n junction HEC spectra - attachment 9 Merger server error messages since 17.15 MERGE Data Link (2316): bad timestamp 0 3 0x80300000 0x0164e7f8 0x000000000164e7f8 0x166200000164e7f8 0x166bffffffa7654e MERGE Data Link (2324): bad timestamp 8 3 0x88300000 0x0534e25c 0x000000000534e25c 0x166200000534e25c 0x166bffffed8383fc MERGE Data Link (2322): bad timestamp 6 3 0xc1a07f16 0x0070e9cc 0x000001e74070e9cc 0x166c01e74070e9cc 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1b37895 0x0070e9cc 0x000001e74070e9cc 0x166c01e74070e9cc 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc19f7e41 0x0070f19c 0x000001e74070f19c 0x166c01e74070f19c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1a27e22 0x0070f19c 0x000001e74070f19c 0x166c01e74070f19c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1b47399 0x0070f19c 0x000001e74070f19c 0x166c01e74070f19c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1ab7dad 0x0070f96c 0x000001e74070f96c 0x166c01e74070f96c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1b564f9 0x0070f96c 0x000001e74070f96c 0x166c01e74070f96c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1b60177 0x0071013c 0x000001e74071013c 0x166c01e74071013c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1a57e95 0x00e2208c 0x000001e700e2208c 0x166c01e700e2208c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1b81491 0x00e2208c 0x000001e700e2208c 0x166c01e700e2208c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1ac7e4f 0x00e2285c 0x000001e700e2285c 0x166c01e700e2285c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1b90000 0x00e2285c 0x000001e700e2285c 0x166c01e700e2285c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1ba0c64 0x00e2302c 0x000001e700e2302c 0x166c01e700e2302c 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1bb6ea8 0x00e237fc 0x000001e700e237fc 0x166c01e700e237fc 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1a87dc6 0x00e23fcc 0x000001e700e23fcc 0x166c01e700e23fcc 0x166c01e74071090c MERGE Data Link (2322): bad timestamp 6 3 0xc1bc0641 0x00e23fcc 0x000001e700e23fcc 0x166c01e700e23fcc 0x166c01e74071090c
Attachment 1: Screenshot_2021-03-13_Temperature_and_status_scan_aidas-gsi.png

Attachment 2: Screenshot_2021-03-13_Statistics_aidas-gsi.png

Attachment 3: 32.png

Attachment 4: Screenshot_2021-03-13_Temperature_and_status_scan_aidas-gsi(1).png

Attachment 5: Screenshot_2021-03-13_Statistics_aidas-gsi(1).png

Attachment 6: 33.png

Attachment 7: Screenshot_2021-03-13_Spectrum_Browser_aidas-gsi.png

Attachment 8: Screenshot_2021-03-13_Spectrum_Browser_aidas-gsi(1).png

Attachment 9: Screenshot_2021-03-13_Spectrum_Browser_aidas-gsi(2).png

	365	Sat Jun 12 13:56:00 2021	TD	Saturday 12 June
14.11 DAQ continues file S496/R32_697 High data rate from c. 06.00 this morning ASIC check System wide checks OK except Base Current Difference aida01 fault 0x8944 : 0x8948 : 4 aida02 fault 0x9b36 : 0x9b3a : 4 aida03 fault 0xf26b : 0xf26f : 4 aida04 fault 0x57a0 : 0x57a4 : 4 aida05 fault 0x4d3c : 0x4d3e : 2 aida05 : WR status 0x10 aida06 fault 0x640c : 0x640e : 2 aida07 fault 0x255e : 0x2560 : 2 aida08 fault 0xffbd : 0xffbf : 2 White Rabbit error counter test result: Passed 8, Failed 8 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida12 fault 0x0 : 0x21be : 8638 aida13 fault 0x0 : 0x2294 : 8852 FPGA Timestamp error counter test result: Passed 14, Failed 2 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 33 10 9 2 5 4 2 2 2 4 6 : 37604 aida02 : 46 12 7 2 4 4 3 2 2 4 6 : 37832 aida03 : 34 10 9 5 4 3 1 3 3 3 6 : 36744 aida04 : 35 12 10 1 3 4 2 3 3 3 6 : 36972 aida05 : 37 9 8 3 4 4 2 2 2 4 6 : 37564 aida06 : 34 10 5 5 4 2 2 3 2 4 6 : 37832 aida07 : 31 11 1 7 4 2 3 2 2 4 6 : 37572 aida08 : 40 7 4 5 3 4 3 2 2 4 6 : 37752 aida09 : 39 9 8 4 1 3 3 2 2 4 6 : 37540 aida10 : 43 12 8 4 4 3 3 3 1 4 6 : 37260 aida11 : 34 14 10 5 3 4 3 3 1 4 6 : 37368 aida12 : 46 12 3 4 4 4 3 3 1 4 6 : 37320 aida13 : 41 11 5 4 5 3 3 3 1 4 6 : 37260 aida14 : 39 10 2 6 4 4 3 3 1 4 6 : 37324 aida15 : 19 12 4 3 2 2 3 2 2 4 6 : 37324 aida16 : 45 10 6 4 5 3 3 3 1 4 6 : 37284 Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same FEE : aida01 => Options file size is 1026 Last changed Fri Jun 04 09:30:42 CEST 2021 FEE : aida02 => Options file size is 1025 Last changed Sun May 23 00:19:21 CEST 2021 FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021 FEE : aida04 => Options file size is 1025 Last changed Fri May 14 16:54:56 CEST 2021 FEE : aida05 => Options file size is 1025 Last changed Mon May 17 06:25:41 CEST 2021 FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021 FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021 FEE : aida08 => Options file size is 1025 Last changed Sun May 23 00:16:54 CEST 2021 FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021 FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021 FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 Grafana - DSSSD bias & leakage current - most recent 7 days - attachment 1 Lost activity monitor - attachment 2 1.8.W spectra - 20us FSR - attachments 3 & 4 ADC data items - attachment 5 FEE64 temperatures OK - attachment 6 DSSSD bias & leakage currents OK - attachment 7 Merger/Tape Server/Merger statistics - attachment 8 no merger errors reported since previous restart 15.05 analysis of file S496/R32_698 - attachment 9 max dead time 0.05% aida04 15.33 aida15 rebooted - see https://elog.ph.ed.ac.uk/DESPEC/365 successful DAQ stop aida15 DAQ reset, setup, go successful DAQ go
Attachment 1: Screenshot_2021-06-12_AIDA_Alerting_-_Grafana.png

Attachment 2: Screenshot_2021-06-12_Lost_activity_monitor_aidas-gsi.png

Attachment 3: Screenshot_2021-06-12_Spectrum_Browser_aidas-gsi(1).png

Attachment 4: Screenshot_2021-06-12_Spectrum_Browser_aidas-gsi.png

Attachment 5: Screenshot_2021-06-12_Statistics_aidas-gsi.png

Attachment 6: Screenshot_2021-06-12_Temperature_and_status_scan_aidas-gsi.png

Attachment 7: 998.png

Attachment 8: 999.png

Attachment 9: R32_698
* TDR format 3.3.0 analyser - TD - May 2021 * ERROR: READ I/O error: 5002 blocks: 32000 ADC data format: 44970784 ( 15685.0 Hz) Other data format: 216949222 ( 75668.1 Hz) Sample trace data format: 0 ( 0.0 Hz) Undefined format: 0 ( 0.0 Hz) Other data format type: PAUSE: 62 ( 0.0 Hz) RESUME: 62 ( 0.0 Hz) SYNC100: 42680 ( 14.9 Hz) WR48-63: 42680 ( 14.9 Hz) FEE64 disc: 985985 ( 343.9 Hz) MBS info: 215877753 ( 75294.4 Hz) Other info: 0 ( 0.0 Hz) ADC data range bit set: 0 ( 0.0 Hz) Timewarps: ADC: 0 ( 0.0 Hz) PAUSE: 0 ( 0.0 Hz) RESUME: 0 ( 0.0 Hz) SYNC100: 0 ( 0.0 Hz) WR48-63: 0 ( 0.0 Hz) FEE64 disc: 0 ( 0.0 Hz) MBS info: 0 ( 0.0 Hz) Undefined: 0 ( 0.0 Hz) Sample trace: 0 ( 0.0 Hz) * Timestamp elapsed time: 2867.115 s FEE elapsed dead time(s) elapsed idle time(s) 0 0.000 0.000 1 0.000 2299.418 2 0.673 0.000 3 1.368 0.000 4 0.000 0.000 5 0.000 2495.101 6 0.000 0.000 7 0.000 2566.695 8 0.000 0.000 9 0.000 0.000 10 0.000 0.000 11 0.000 0.000 12 0.000 0.000 13 0.000 0.000 14 0.000 0.000 15 0.000 0.000 16 0.000 0.000 17 0.000 0.000 18 0.000 0.000 19 0.000 0.000 20 0.000 0.000 21 0.000 0.000 22 0.000 0.000 23 0.000 0.000 24 0.000 0.000 25 0.000 0.000 26 0.000 0.000 27 0.000 0.000 28 0.000 0.000 29 0.000 0.000 30 0.000 0.000 31 0.000 0.000 32 0.000 0.000 * Statistics FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 WR48-63 Disc MBS Other HEC Data 0 467 2 0 0 0 0 1 1 0 0 0 0 1 72420 30 0 0 0 0 15 15 0 0 0 0 2 935 107990737 0 0 33 33 19385 19385 0 107951901 0 0 3 38882631 108955999 0 0 29 29 22052 22052 985985 107925852 0 0 4 496 0 0 0 0 0 0 0 0 0 0 0 5 3224207 1336 0 0 0 0 668 668 0 0 0 0 6 1520 0 0 0 0 0 0 0 0 0 0 0 7 2784837 1118 0 0 0 0 559 559 0 0 0 0 8 473 0 0 0 0 0 0 0 0 0 0 0 9 173 0 0 0 0 0 0 0 0 0 0 0 10 554 0 0 0 0 0 0 0 0 0 0 0 11 317 0 0 0 0 0 0 0 0 0 0 0 12 752 0 0 0 0 0 0 0 0 0 0 0 13 204 0 0 0 0 0 0 0 0 0 0 0 14 302 0 0 0 0 0 0 0 0 0 0 0 15 496 0 0 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 0 0 0 * Timewarps FEE ADC Pause Resume SYNC100 WR48-63 Disc MBS Undefined Samples 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 9 0 0 0 0 0 0 0 0 0 10 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 12 0 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 14 0 0 0 0 0 0 0 0 0 15 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 * Program elapsed time: 29.945s ( 1068.615 blocks/s, 66.788 Mb/s)
	690	Sat Jan 11 14:05:03 2025	TD	Saturday 11 January 2024
14.37 Detector bias & leakage current OK - attachment 1 FEE64 temperatures OK - attachment 2 WR timestamps - attachment 3 aida06 out of sync global clock status - attachment 4 aida06 fails ADC calibration - attachment 5 all fail - probably due to ASIC synchronise after ADC calibration WR decoder & FPGA TS status - attachments 6-7 aida06 status 0xd DAQ run control - attachment 8 aida06 undefined => aida06 has rebooted Merger & Tape Server - attachments 9-10 merger, tape server and data transfer have stopped See https://elog.ph.ed.ac.uk/DESPEC/691 aidao06 system console - aida06 rebooted sometime yesterday *** Recovery For FEE64 aida06 only DAQ reset DAQ setup For all FEE64s DAQ stop Restart merger, merger setup, merger go Following two merger restart cycles all FEE64s stopped OK Recovery complete All system wide checks OK Disable data transfer, DAQ go per FEE64 rate spectra = attachment 11 aida04 high rates per FEE64 1.8.W spectra - 20us FSR - attachments 12-13 DAQ stop, enable data transfer, DAQ go Merger and server consoles - attachment 14 merger and tape server (no storage mode) running OK but no data transfer to MBS server WR timestamps OK - attachment 15 ADC and DISC data item stats - attachment 16-17 aida04 & aida16 high rates - all others appear to be OK ASIC check load for all aida16 ASICs changes rate from c. 420k to 0 ASIC check load for all aida04 ASICs changes rate from c. 200k to c. 120k 18.00 No data transfer to MBS - nothing useful being donme at the moment - will place system in safe state DAQ stop Detector bias OFF FEE64 power OFF
Attachment 1: Screenshot_from_2025-01-11_14-37-29.png

Attachment 2: Screenshot_from_2025-01-11_14-55-21.png

Attachment 3: Screenshot_from_2025-01-11_14-56-44.png

Attachment 4: Screenshot_from_2025-01-11_14-57-14.png

Attachment 5: Screenshot_from_2025-01-11_14-57-37.png

Attachment 6: Screenshot_from_2025-01-11_14-58-05.png

Attachment 7: Screenshot_from_2025-01-11_14-58-25.png

Attachment 8: Screenshot_from_2025-01-11_14-59-24.png

Attachment 9: Screenshot_from_2025-01-11_15-00-00.png

Attachment 10: Screenshot_from_2025-01-11_15-00-31.png

Attachment 11: Screenshot_from_2025-01-11_15-29-32.png

Attachment 12: Screenshot_from_2025-01-11_15-30-35.png

Attachment 13: Screenshot_from_2025-01-11_15-31-29.png

Attachment 14: Screenshot_from_2025-01-11_15-35-14.png

Attachment 15: Screenshot_from_2025-01-11_15-38-24.png

Attachment 16: Screenshot_from_2025-01-11_15-27-28.png

Attachment 17: Screenshot_from_2025-01-11_15-26-39.png

	214	Sat Apr 10 12:15:54 2021	OH, TD	Saturday 10 April
12:37 DAQ found crashed. Had crashed at some time following 7:50am following previous statistics update Unable to recover the FEEs so forced to power cycle Following power cycle statistics much improved from yesterday. In the waveforms the lower frequency component that was prevalent yesterday is no longer visible. The waveforms are not perfect by any means though Also note that following an ASIC synchronisation all of the FEEs lose ADC calibration and must be manually recalibrated. 16.42 UTC+1 per FEE64 1.8.W spectra 20us FSR attachments 7 & 8 200us FSR attachments 9 & 10 2ms FSR attachments 11 & 12 20ms FSR attachments 15 & 16 rate spectra attachment 13 good events statistics attachment 14
Attachment 1: 210410_1237_Aida_crash.png

Attachment 2: 210410_1242_Crash.png

Attachment 3: 210410_1251_aida06_drop.png

Attachment 4: 210410_1312_Waveform1.png

Attachment 5: 210304_1313_Waveform2.png

Attachment 6: 210410_1318_Stats.png

Attachment 7: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi.png

Attachment 8: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(5).png

Attachment 9: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(1).png

Attachment 10: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(4).png

Attachment 11: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(2).png

Attachment 12: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(3).png

Attachment 13: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(6).png

Attachment 14: Screenshot_2021-04-10_Statistics_aidas-gsi.png

Attachment 15: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(7).png

Attachment 16: Screenshot_2021-04-10_Spectrum_Browser_aidas-gsi(8).png

	634	Sat Jun 1 12:48:54 2024	TD	Saturday 1 June
13.26 DSSSD bias & leakage current - attachments 1-3 FEE64 temps OK - attachment 4 aida02 asic sensor u/s All system wide checks OK except WR decoder status - attachment 5 ADC data item stats - attachment 6 per FEE64 Rate spectra - attachments 7-8 per FEE64 1.8.W spectra - 20us FSR - attachments 9-10 WR timestamps OK - attachment 11 13.59 Data file S181/R1 alpha background BNC PB-5 disconnected? slow comparator 0x64 ADC data item stats - attachment 12 Merger, TapeServer etc - attachments 13-14 14.02 All histograms & stats zero'd 16.19 DSSSD bias & leakage current - attachment 15 FEE64 temps OK - attachment 16 ADC data item stats - attachment 17 per FEE64 Stat spectra - attachment 18 19.16 DSSSD bias & leakage current - attachments 19-20 FEE64 temps OK - attachment 21 ADC data item stats - attachment 22 per FEE64 Stat spectra - attachment 23 2x Check ASIC Control 21.42 DSSSD bias & leakage current - attachment 24 FEE64 temps OK - attachment 25 ADC data item stats - attachment 26 per FEE64 Stat spectra - attachment 27 00.48 DSSSD bias & leakage current - attachment 28 FEE64 temps OK - attachment 29 ADC data item stats - attachment 30 per FEE64 Stat spectra - attachment 31
Attachment 1: Screenshot_from_2024-06-01_13-26-48.png

Attachment 2: Screenshot_from_2024-06-01_13-27-24.png

Attachment 3: Screenshot_from_2024-06-01_13-27-47.png

Attachment 4: Screenshot_from_2024-06-01_13-40-22.png

Attachment 5: Screenshot_from_2024-06-01_13-43-09.png

Attachment 6: Screenshot_from_2024-06-01_13-44-41.png

Attachment 7: Screenshot_from_2024-06-01_13-45-21.png

Attachment 8: Screenshot_from_2024-06-01_13-45-49.png

Attachment 9: Screenshot_from_2024-06-01_13-47-30.png

Attachment 10: Screenshot_from_2024-06-01_13-48-20.png

Attachment 11: Screenshot_from_2024-06-01_13-51-48.png

Attachment 12: Screenshot_from_2024-06-01_13-53-14.png

Attachment 13: Screenshot_from_2024-06-01_14-00-38.png

Attachment 14: Screenshot_from_2024-06-01_14-01-08.png

Attachment 15: Screenshot_from_2024-06-01_16-19-23.png

Attachment 16: Screenshot_from_2024-06-01_16-27-28.png

Attachment 17: Screenshot_from_2024-06-01_16-28-06.png

Attachment 18: Screenshot_from_2024-06-01_16-29-07.png

Attachment 19: Screenshot_from_2024-06-01_19-18-17.png

Attachment 20: Screenshot_from_2024-06-01_19-15-57.png

Attachment 21: Screenshot_from_2024-06-01_19-18-48.png

Attachment 22: Screenshot_from_2024-06-01_19-19-11.png

Attachment 23: Screenshot_from_2024-06-01_19-20-03.png

Attachment 24: Screenshot_from_2024-06-01_21-41-48.png

Attachment 25: Screenshot_from_2024-06-01_21-42-24.png

Attachment 26: Screenshot_from_2024-06-01_21-42-49.png

Attachment 27: Screenshot_from_2024-06-01_21-43-54.png

Attachment 28: Screenshot_from_2024-06-02_00-48-44.png

Attachment 29: Screenshot_from_2024-06-02_00-49-22.png

Attachment 30: Screenshot_from_2024-06-02_00-49-48.png

Attachment 31: Screenshot_from_2024-06-02_00-50-53.png

	233	Sat Apr 17 07:28:02 2021	LPG, TD	Saturday 08:00 - 12:00
08:30 CEST HV and leakage currents: elog:233/1 Detector rates: elog:233/2 Temperatures: elog:233/3 WR status: FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module FPGA�status: �� Base �� Current �� Difference aida12 fault �� 0x0 : �� 0x1 : �� 1 � FPGA Timestamp error counter test result: Passed 11, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last 09:20 CEST Stats: ok! DB: No faults found ucesb: ok! 09:40 CEST Beam will be stopped in order to increase intensity. Expected to be around 3-4 hours. For now, we still get implants when Beam spill is on. Seems to be fluctuating as they play around. 10:00 CEST Still getting beam, it is fluctuating in intensity Stats: ok! DB: No faults found ucesb: ok! HV and leakage currents: elog:233/4 Detector rates: elog:233/5 Temperatures: elog:233/6 Clock check: ok! ADC calibration: FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 WR check: ok! FPGA check: Base Current Difference aida12 fault 0x0 : 0x1 : 1 FPGA Timestamp error counter test result: Passed 11, Failed 1 Memory check: ok! 10:40 CEST Stats: ok! DB: No faults found ucesb: ok! 11:00 CEST Stats: ok! DB: No faults found ucesb: ok! 11:30 CEST Stats: ok! DB: No faults found ucesb: ok! 12:00 BST Stats: ok! DB: No faults found ucesb: ok! HV and leakage currents: elog:233/7 Detector rates: elog:233/8 Temperatures: elog:233/9 Clock check: ok! ADC calibration: FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 WR check: Base Current Difference aida05 fault 0x1a52 : 0x1a53 : 1 aida06 fault 0x4f3e : 0x4f3f : 1 aida07 fault 0x3bcd : 0x3bce : 1 aida08 fault 0xc7c7 : 0xc7c8 : 1 White Rabbit error counter test result: Passed 8, Failed 4 FPGA check: Base Current Difference aida09 fault 0x0 : 0x1 : 1 aida12 fault 0x0 : 0x2 : 2 Memory check: ok!
Attachment 1: 20.png

Attachment 2: Screenshot_2021-04-17_Statistics_aidas-gsi.png

Attachment 3: Screenshot_2021-04-17_Temperature_and_status_scan_aidas-gsi.png

Attachment 4: 21.png

Attachment 5: Screenshot_2021-04-17_Statistics_aidas-gsi(1).png

Attachment 6: Screenshot_2021-04-17_Temperature_and_status_scan_aidas-gsi(1).png

Attachment 7: 22.png

Attachment 8: Screenshot_2021-04-17_Statistics_aidas-gsi(2).png

Attachment 9: Screenshot_2021-04-17_Temperature_and_status_scan_aidas-gsi(2).png

	237	Sun Apr 18 00:57:36 2021	BA, MA	Sanday 18 April 00.00-08.00
02:01 Beam has stopped at 01:37 and returend at 01:43 for few min and then stopped again and not knowen how it will take until it is back AIDA scalers attached 1 statistic attached 2 temretuer attached 3 bias attached 4 Clock check ok ADC check : FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida05 fault 0x1a52 : 0x1a55 : 3 aida06 fault 0x4f3e : 0x4f41 : 3 aida07 fault 0x3bcd : 0x3bea : 29 aida08 fault 0xc7c7 : 0xc7ca : 3 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida09 fault 0x0 : 0x1 : 1 aida12 fault 0x0 : 0x9 : 9 FPGA Timestamp error counter test result: Passed 10, Failed 2 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 32 8 3 1 0 3 1 3 3 3 6 : 36240 aida02 : 11 7 9 3 1 2 2 4 2 3 6 : 35988 aida03 : 32 4 13 5 5 4 3 3 2 3 6 : 36432 aida04 : 26 7 6 1 2 3 2 4 2 3 6 : 36128 aida05 : 18 8 8 7 4 2 2 2 2 4 6 : 37352 aida06 : 24 11 3 1 2 5 1 3 3 3 6 : 36616 aida07 : 14 5 3 3 3 2 3 2 4 3 6 : 37296 aida08 : 21 7 1 5 0 1 2 3 3 3 6 : 36284 aida09 : 0 7 1 1 1 3 2 2 3 3 6 : 35880 aida10 : 22 5 3 4 1 2 2 2 3 3 6 : 35952 aida11 : 4 3 1 1 2 2 3 3 2 3 6 : 35544 aida12 : 22 10 5 4 4 4 1 3 3 3 6 : 36728 02:19 beam is back 03:58 The beam has not been stable yet The rate reach 1.5 kHz, they will contact FRS team to lower the intensity of the beam AIDA scalers attached 8 statistic attached 7 temretuer attached 6 bias attached 5 FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida05 fault 0x1a52 : 0x1a55 : 3 aida06 fault 0x4f3e : 0x4f41 : 3 aida07 fault 0x3bcd : 0x3beb : 30 aida08 fault 0xc7c7 : 0xc7ca : 3 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida09 fault 0x0 : 0x1 : 1 aida12 fault 0x0 : 0x9 : 9 FPGA Timestamp error counter test result: Passed 10, Failed 2 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 21 8 6 2 1 2 1 3 3 3 6 : 36212 aida02 : 24 14 14 2 1 2 2 4 2 3 6 : 36144 aida03 : 31 5 10 5 5 4 2 3 2 3 6 : 36132 aida04 : 12 11 12 2 2 2 3 4 2 3 6 : 36360 aida05 : 23 8 5 7 4 2 2 2 2 4 6 : 37324 aida06 : 21 14 14 1 3 5 1 3 3 3 6 : 36868 aida07 : 15 9 5 0 3 2 3 2 4 3 6 : 37268 aida08 : 21 11 10 3 0 1 2 3 3 3 6 : 36396 aida09 : 5 7 5 1 1 3 1 3 3 3 6 : 36220 aida10 : 15 13 12 3 2 1 2 2 3 3 6 : 36036 aida11 : 13 10 1 0 2 2 2 4 2 3 6 : 35860 aida12 : 29 5 4 5 5 3 1 3 3 3 6 : 36668 05: 07 The rate was a bout 1500 and 2000, we contacted Oscar he said (if it's just bursts it should be ok), so they decided to do nothing. 06:26 AIDA scalers attached 9 statistic attached 10 temretuer attached 11 bias attached 12 Clock status test result: Passed 12, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida01 fault 0x7685 : 0x7686 : 1 aida02 fault 0x941c : 0x941d : 1 aida03 fault 0x7cd6 : 0x7cd7 : 1 aida04 fault 0xb86c : 0xb86d : 1 aida05 fault 0x1a52 : 0x1a59 : 7 aida06 fault 0x4f3e : 0x4f45 : 7 aida07 fault 0x3bcd : 0x3bf9 : 44 aida08 fault 0xc7c7 : 0xc7ce : 7 aida09 fault 0xb33a : 0xb33b : 1 White Rabbit error counter test result: Passed 3, Failed 9 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida09 fault 0x0 : 0x1 : 1 aida12 fault 0x0 : 0xa : 10 FPGA Timestamp error counter test result: Passed 10, Failed 2 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 17 12 6 2 1 2 1 3 3 3 6 : 36228 aida02 : 19 11 12 3 2 2 2 4 2 3 6 : 36164 aida03 : 25 8 12 5 4 4 3 3 2 3 6 : 36356 aida04 : 22 19 11 3 1 2 3 4 2 3 6 : 36416 aida05 : 35 6 5 6 3 2 2 2 3 3 6 : 36236 aida06 : 12 11 11 2 3 4 1 3 3 3 6 : 36664 aida07 : 18 6 2 1 3 2 3 2 3 3 6 : 36216 aida08 : 27 10 8 3 0 1 2 3 3 3 6 : 36380 aida09 : 18 6 6 1 0 2 2 2 3 3 6 : 35832 aida10 : 3 14 10 3 1 1 2 3 3 3 6 : 36412 aida11 : 1 3 2 0 2 2 2 4 2 3 6 : 35772 aida12 : 0 5 6 3 3 4 1 3 3 3 6 : 36520 07:57 The beam stopped and they said there is a water leak !
Attachment 1: 20210418_0154.png

Attachment 2: 20210418_0152_rate.png

Attachment 3: 20210418_0150_tem.png

Attachment 4: 20210418_0150_bias.png

Attachment 5: 20210418_0407.png

Attachment 6: 20210418_0409.png

Attachment 7: 20210418_0411.png

Attachment 8: 20210418_0413.png

Attachment 9: 18042021_0722_AIDA.png

Attachment 10: 18042021_0615_rate.png

Attachment 11: 18042021_0616_temp.png

Attachment 12: 18042021_0620_bias.png

	565	Mon Apr 8 11:18:19 2024	TD	S505 offline analysis data file R3_150
DRG quotes ( from Elog ) S505 FEE64 configuration as "Configuration: Single/Narrow - 8 FEEs, 2 DSSDs DSSD 1: X 0-63 = 3 (HV -ve) X 64-127 = 1 Y 0-63 = 4 (HV 0v) Y 64-127 = 2 DSSD 2: X 0-63 = 7 (HV -ve) X 64-127 = 5 Y 0-63 = 8 (HV 0v) Y 64-127 = 6 Scalers: 1 - Pulser 2 - n/c 3 - Time Machine Original 4 - Time Machine Delayed 5 - n/c 6 - n/c 7 - SC41 L 8 - SC41 R" LEC (20MeV FSR) spectra attachment 1 m_p versus m_n DSSSD#1 & DSSSD#2 attachment 2 E_p versus E_n DSSSD#1 & DSSSD#2 HEC (20GeV FSR) spectra attachment 3 m_p versus m_n DSSSD#1 & DSSSD#2 attachment 4 E_p versus E_n DSSSD#1 & DSSSD#2 attachment variables.dat ( ADC offsets, e_diff windows & FEE64 onfiguration ) NAMELIST I/O format
Attachment 1: Screenshot_from_2024-03-29_20-21-07.png

Attachment 2: Screenshot_from_2024-03-29_20-21-45.png

Attachment 3: Screenshot_from_2024-03-29_20-22-29.png

Attachment 4: Screenshot_from_2024-03-29_20-23-06.png

Attachment 5: variables.dat
$variables offset( 0) = 28.32 offset( 1) = 17.71 offset( 2) = -9.75 offset( 3) = -5.24 offset( 4) = -10.84 offset( 5) = 0.13 offset( 6) = 28.59 offset( 7) = 28.54 offset( 8) = 0.83 offset( 9) = -12.15 offset( 10) = 29.36 offset( 11) = -50.47 offset( 12) = 10.03 offset( 13) = -26.90 offset( 14) = 12.49 offset( 15) = 10.57 offset( 16) = 9.29 offset( 17) = 1.09 offset( 18) = 21.86 offset( 19) = -0.32 offset( 20) = 22.59 offset( 21) = -9999.99 offset( 22) = -20.22 offset( 23) = 6.61 offset( 24) = -8.80 offset( 25) = -1.15 offset( 26) = 13.08 offset( 27) = -9.03 offset( 28) = -2.67 offset( 29) = -9.42 offset( 30) = 8.07 offset( 31) = 19.01 offset( 32) = 6.86 offset( 33) = 15.16 offset( 34) = -3.89 offset( 35) = -18.80 offset( 36) = 17.79 offset( 37) = 16.45 offset( 38) = -0.74 offset( 39) = 0.69 offset( 40) = -14.59 offset( 41) = -10.02 offset( 42) = 11.38 offset( 43) = -2.57 offset( 44) = 15.48 offset( 45) = 14.57 offset( 46) = 2.95 offset( 47) = 30.70 offset( 48) = -12.55 offset( 49) = -15.61 offset( 50) = -6.61 offset( 51) = -7.10 offset( 52) = -33.20 offset( 53) = 21.42 offset( 54) = -4.07 offset( 55) = -18.23 offset( 56) = 8.83 offset( 57) = -22.74 offset( 58) = 11.47 offset( 59) = 10.67 offset( 60) = -28.65 offset( 61) = 15.29 offset( 62) = 5.76 offset( 63) = -11.57 offset( 64) = 1.95 offset( 65) = -9999.99 offset( 66) = 22.52 offset( 67) = 42.10 offset( 68) = -0.20 offset( 69) = 9.78 offset( 70) = -11.48 offset( 71) = -0.03 offset( 72) = -12.50 offset( 73) = 25.08 offset( 74) = 12.77 offset( 75) = -2.76 offset( 76) = 7.90 offset( 77) = 9.85 offset( 78) = 5.20 offset( 79) = -13.91 offset( 80) = 18.82 offset( 81) = -8.25 offset( 82) = -8.40 offset( 83) = 13.67 offset( 84) = -10.37 offset( 85) = 28.32 offset( 86) = 11.42 offset( 87) = 2.74 offset( 88) = -24.88 offset( 89) = 11.28 offset( 90) = -26.69 offset( 91) = 0.91 offset( 92) = 8.04 offset( 93) = 7.64 offset( 94) = 10.10 offset( 95) = -20.71 offset( 96) = 6.72 offset( 97) = -12.63 offset( 98) = 10.27 offset( 99) = 16.05 offset( 100) = 8.96 offset( 101) = 33.57 offset( 102) = 28.81 offset( 103) = 23.49 offset( 104) = 7.96 offset( 105) = 6.07 offset( 106) = 21.57 offset( 107) = 13.06 offset( 108) = 0.82 offset( 109) = -3.55 offset( 110) = -5.21 offset( 111) = 11.48 offset( 112) = 16.21 offset( 113) = -0.10 offset( 114) = 3.87 offset( 115) = 19.76 offset( 116) = -9.11 offset( 117) = 24.64 offset( 118) = 1.82 offset( 119) = -9999.99 offset( 120) = 22.80 offset( 121) = -7.37 offset( 122) = -18.32 offset( 123) = -24.74 offset( 124) = -4.71 offset( 125) = 19.64 offset( 126) = 53.61 offset( 127) = 6.57 offset( 128) = 3.21 offset( 129) = 7.20 offset( 130) = 5.55 offset( 131) = -3.40 offset( 132) = -16.40 offset( 133) = -1.71 offset( 134) = -14.85 offset( 135) = -29.53 offset( 136) = 0.68 offset( 137) = -0.41 offset( 138) = 17.59 offset( 139) = -28.92 offset( 140) = -8.79 offset( 141) = 11.69 offset( 142) = -5.80 offset( 143) = -8.21 offset( 144) = 13.90 offset( 145) = 11.27 offset( 146) = -17.02 offset( 147) = -8.19 offset( 148) = 6.14 offset( 149) = -13.13 offset( 150) = 15.41 offset( 151) = 0.12 offset( 152) = -5.02 offset( 153) = 4.25 offset( 154) = 3.84 offset( 155) = 13.34 offset( 156) = 16.79 offset( 157) = -36.21 offset( 158) = -2.18 offset( 159) = 12.94 offset( 160) = 2.05 offset( 161) = -17.31 offset( 162) = 18.38 offset( 163) = -7.17 offset( 164) = 6.59 offset( 165) = -13.36 offset( 166) = -12.11 offset( 167) = -3.91 offset( 168) = 10.97 offset( 169) = -25.72 offset( 170) = -11.53 offset( 171) = 1.94 offset( 172) = -12.76 offset( 173) = 18.55 offset( 174) = 13.49 offset( 175) = -9.45 offset( 176) = -10.19 offset( 177) = 18.69 offset( 178) = 24.49 offset( 179) = 30.44 offset( 180) = 41.95 offset( 181) = 1.55 offset( 182) = 20.88 offset( 183) = 4.76 offset( 184) = 15.80 offset( 185) = 12.37 offset( 186) = -13.03 offset( 187) = 15.64 offset( 188) = -8.44 offset( 189) = -3.02 offset( 190) = 10.57 offset( 191) = 6.88 offset( 192) = -17.81 offset( 193) = -5.77 offset( 194) = -18.29 offset( 195) = 17.62 offset( 196) = -30.66 offset( 197) = -7.37 offset( 198) = 36.32 offset( 199) = 3.42 offset( 200) = -21.92 offset( 201) = 15.88 offset( 202) = -17.33 offset( 203) = -2.71 offset( 204) = -21.06 offset( 205) = -4.53 offset( 206) = -1.59 offset( 207) = -9.54 offset( 208) = -0.04 offset( 209) = 23.57 offset( 210) = 13.83 offset( 211) = -9.28 offset( 212) = 12.42 offset( 213) = 23.85 offset( 214) = 7.90 offset( 215) = -7.29 offset( 216) = 26.18 offset( 217) = 33.05 offset( 218) = 32.10 offset( 219) = -8.10 offset( 220) = 16.16 offset( 221) = 3.94 offset( 222) = -18.22 offset( 223) = -16.84 offset( 224) = 5.79 offset( 225) = 21.07 offset( 226) = 45.18 offset( 227) = -13.85 offset( 228) = 6.76 offset( 229) = 13.59 offset( 230) = 8.28 offset( 231) = -9.32 offset( 232) = 21.30 offset( 233) = 7.02 offset( 234) = 24.11 offset( 235) = 16.26 offset( 236) = 11.46 offset( 237) = 2.16 offset( 238) = 7.19 offset( 239) = 18.45 offset( 240) = 6.65 offset( 241) = 6.56 offset( 242) = -33.59 offset( 243) = 14.71 offset( 244) = 21.28 offset( 245) = -0.73 offset( 246) = -10.29 offset( 247) = 28.50 offset( 248) = -11.37 offset( 249) = -18.92 offset( 250) = 23.12 offset( 251) = 8.87 offset( 252) = 9.64 offset( 253) = 16.43 offset( 254) = -2.70 offset( 255) = 26.14 offset( 256) = -4.99 offset( 257) = -10.88 offset( 258) = 27.41 offset( 259) = -3.48 offset( 260) = -11.18 offset( 261) = 12.60 offset( 262) = 22.19 offset( 263) = -20.16 offset( 264) = 20.32 offset( 265) = 9.66 offset( 266) = 13.30 offset( 267) = -12.64 offset( 268) = 53.69 offset( 269) = 23.15 offset( 270) = 43.60 offset( 271) = 48.58 offset( 272) = -13.12 offset( 273) = -12.57 offset( 274) = 35.19 offset( 275) = 14.84 offset( 276) = 33.05 offset( 277) = 13.73 offset( 278) = 45.45 offset( 279) = 55.49 offset( 280) = 48.13 offset( 281) = 3.86 offset( 282) = 28.44 offset( 283) = 23.73 offset( 284) = 11.53 offset( 285) = -19.46 offset( 286) = 10.81 offset( 287) = 17.23 offset( 288) = -13.85 offset( 289) = 30.17 offset( 290) = 10.70 offset( 291) = 28.06 offset( 292) = -14.35 offset( 293) = 23.46 offset( 294) = 15.16 offset( 295) = -25.15 offset( 296) = -15.03 offset( 297) = -24.74 offset( 298) = -5.94 ... 228 more lines ...
	670	Tue Nov 5 15:19:35 2024	TD	S505 offline analysis R5_780 - R5_814
Offline analysis of data files S505/R5_780 - R5_814 (corresponding to MBS data files 73-74) Can find an analysis of alpha background runs at RIBF, RIKEN for comparison at https://elog.ph.ed.ac.uk/AIDA/816 Beam off - background runs without sources MBS 73 27.6.22 09:33-11:33 CEST https://elog.gsi.de/despec/S505/204 MBS 74 27.6.22 11:34-13:34 CEST https://elog.gsi.de/despec/S505/206 MBS 75 27.6.22 13:35-16:29 CEST https://elog.gsi.de/despec/S505/209 ADC offsets per https://elog.ph.ed.ac.uk/DESPEC/556 FEE64 configuration FEE64 a b c d DSSSD#1 3 4 1 2 DSSSD#2 7 8 5 6 p+n junction FE64s odd numbered Data analysis assumes - all LEC ADC data channels with valid ADC offset included (474 of 512 channels) - no clustering - no p+n junction side - n+n Ohmic side correlation time gates - valid LEC events 0 < p+n junction side multiplicity < 8 and 0 < n+n Ohmic side multiplicity < 8 Attachments 1-2 - per DSSSD p+n versus n+n multiplicity Attachment 3 - per DSSSD x versus y Attachments 4-5 - per DSSSD p+n versus n+n energy (20keV/channel nominal) all combinations of per DSSSD p+n junction and n+n Ohmic energies with projection of data within window onto x and y axes too many events for natural (U decay series) background off leading diagonal correlations anomalous transverse width of leading diagonal correlation wider than expected - ADC offsets OK? Attachment 6 - per FEE64 WR timestamp (32.768us/channel) FEE64 sync test using pulser data - looks OK Attachments 7-14 - per FEE64 ADC spectra (5.6keV/channel nominal) note common x/y scale - pulser peak height proxy for peak width per FEE64 1.8.L pulser peak widths (ch FWHM) 1 11.43 2 16.58 3 12.52 4 17.54 5 9.10 6 12.22 7 17.03 8 16.09 3 of 4 p+n junction FEE64 good (<70keV), 1 of 4 n+n Ohmic FEE64 good - all others < 100keV Pulser peak indicates noise/gain/offset stable throughout background runs Attachments 15-22 - per FEE64 ADC spectra (5.6kleV/channel nominal) observe broad peak-like structures (c. 2.8MeV) in first channel of most ASICs? Attachment 23 per DSSSD p+n versus n+n energy (20keV/channel nominal) valid LEC events p+n junction side multiplicity = 1 n+n Ohmic side multiplicity = 1 Attachment 24 p+n FEE64 #0 energy versus each of n+n FEE64s (#1, #3, #5 and #7) energies (20keV/channel nominal) valid LEC events p+n junction side multiplicity = 1 n+n Ohmic side multiplicity = 1 Attachments 23 & 24 do not unambiguously identify which FEE64s are attached to which DSSSD
Attachment 1: Screenshot_from_2024-11-06_10-16-55.png

Attachment 2: Screenshot_from_2024-11-06_10-18-43.png

Attachment 3: Screenshot_from_2024-11-06_10-19-38.png

Attachment 4: Screenshot_from_2024-11-06_10-21-13.png

Attachment 5: Screenshot_from_2024-11-06_10-23-42.png

Attachment 6: Screenshot_from_2024-11-06_10-47-04.png

Attachment 7: Screenshot_from_2024-11-06_10-49-16.png

Attachment 8: Screenshot_from_2024-11-06_10-50-17.png

Attachment 9: Screenshot_from_2024-11-06_10-50-59.png

Attachment 10: Screenshot_from_2024-11-06_10-51-48.png

Attachment 11: Screenshot_from_2024-11-06_10-52-49.png

Attachment 12: Screenshot_from_2024-11-06_10-54-12.png

Attachment 13: Screenshot_from_2024-11-06_10-55-07.png

Attachment 14: Screenshot_from_2024-11-06_10-55-56.png

Attachment 15: Screenshot_from_2024-11-06_11-01-47.png

Attachment 16: Screenshot_from_2024-11-06_11-02-48.png

Attachment 17: Screenshot_from_2024-11-06_11-04-21.png

Attachment 18: Screenshot_from_2024-11-06_11-05-09.png

Attachment 19: Screenshot_from_2024-11-06_11-06-16.png

Attachment 20: Screenshot_from_2024-11-06_11-07-16.png

Attachment 21: Screenshot_from_2024-11-06_11-08-07.png

Attachment 22: Screenshot_from_2024-11-06_11-09-09.png

Attachment 23: Screenshot_from_2024-11-08_03-36-38.png

Attachment 24: Screenshot_from_2024-11-08_03-39-13.png

	556	Tue Apr 2 18:37:21 2024	TD	S505 ADC offsets
S505 ADC offsets using pulser walkthrough data from data file R1 ch = channel + ( module * 64 ) + ( range * 2048 ) adc_data( ch ) = INT( RSHIFT( ABS( adc_data( ch ) - 32768 ), 3 ) - offset( ch ) + 0.5 )
Attachment 1: S505_calibration_data.txt
$variables offset( 0) = 28.32 offset( 1) = 17.71 offset( 2) = -9.75 offset( 3) = -5.24 offset( 4) = -10.84 offset( 5) = 0.13 offset( 6) = 28.59 offset( 7) = 28.54 offset( 8) = 0.83 offset( 9) = -12.15 offset( 10) = 29.36 offset( 11) = -50.47 offset( 12) = 10.03 offset( 13) = -26.90 offset( 14) = 12.49 offset( 15) = 10.57 offset( 16) = 9.29 offset( 17) = 1.09 offset( 18) = 21.86 offset( 19) = -0.32 offset( 20) = 22.59 offset( 21) = -9999.99 offset( 22) = -20.22 offset( 23) = 6.61 offset( 24) = -8.80 offset( 25) = -1.15 offset( 26) = 13.08 offset( 27) = -9.03 offset( 28) = -2.67 offset( 29) = -9.42 offset( 30) = 8.07 offset( 31) = 19.01 offset( 32) = 6.86 offset( 33) = 15.16 offset( 34) = -3.89 offset( 35) = -18.80 offset( 36) = 17.79 offset( 37) = 16.45 offset( 38) = -0.74 offset( 39) = 0.69 offset( 40) = -14.59 offset( 41) = -10.02 offset( 42) = 11.38 offset( 43) = -2.57 offset( 44) = 15.48 offset( 45) = 14.57 offset( 46) = 2.95 offset( 47) = 30.70 offset( 48) = -12.55 offset( 49) = -15.61 offset( 50) = -6.61 offset( 51) = -7.10 offset( 52) = -33.20 offset( 53) = 21.42 offset( 54) = -4.07 offset( 55) = -18.23 offset( 56) = 8.83 offset( 57) = -22.74 offset( 58) = 11.47 offset( 59) = 10.67 offset( 60) = -28.65 offset( 61) = 15.29 offset( 62) = 5.76 offset( 63) = -11.57 offset( 64) = 1.95 offset( 65) = -9999.99 offset( 66) = 22.52 offset( 67) = 42.10 offset( 68) = -0.20 offset( 69) = 9.78 offset( 70) = -11.48 offset( 71) = -0.03 offset( 72) = -12.50 offset( 73) = 25.08 offset( 74) = 12.77 offset( 75) = -2.76 offset( 76) = 7.90 offset( 77) = 9.85 offset( 78) = 5.20 offset( 79) = -13.91 offset( 80) = 18.82 offset( 81) = -8.25 offset( 82) = -8.40 offset( 83) = 13.67 offset( 84) = -10.37 offset( 85) = 28.32 offset( 86) = 11.42 offset( 87) = 2.74 offset( 88) = -24.88 offset( 89) = 11.28 offset( 90) = -26.69 offset( 91) = 0.91 offset( 92) = 8.04 offset( 93) = 7.64 offset( 94) = 10.10 offset( 95) = -20.71 offset( 96) = 6.72 offset( 97) = -12.63 offset( 98) = 10.27 offset( 99) = 16.05 offset( 100) = 8.96 offset( 101) = 33.57 offset( 102) = 28.81 offset( 103) = 23.49 offset( 104) = 7.96 offset( 105) = 6.07 offset( 106) = 21.57 offset( 107) = 13.06 offset( 108) = 0.82 offset( 109) = -3.55 offset( 110) = -5.21 offset( 111) = 11.48 offset( 112) = 16.21 offset( 113) = -0.10 offset( 114) = 3.87 offset( 115) = 19.76 offset( 116) = -9.11 offset( 117) = 24.64 offset( 118) = 1.82 offset( 119) = -9999.99 offset( 120) = 22.80 offset( 121) = -7.37 offset( 122) = -18.32 offset( 123) = -24.74 offset( 124) = -4.71 offset( 125) = 19.64 offset( 126) = 53.61 offset( 127) = 6.57 offset( 128) = 3.21 offset( 129) = 7.20 offset( 130) = 5.55 offset( 131) = -3.40 offset( 132) = -16.40 offset( 133) = -1.71 offset( 134) = -14.85 offset( 135) = -29.53 offset( 136) = 0.68 offset( 137) = -0.41 offset( 138) = 17.59 offset( 139) = -28.92 offset( 140) = -8.79 offset( 141) = 11.69 offset( 142) = -5.80 offset( 143) = -8.21 offset( 144) = 13.90 offset( 145) = 11.27 offset( 146) = -17.02 offset( 147) = -8.19 offset( 148) = 6.14 offset( 149) = -13.13 offset( 150) = 15.41 offset( 151) = 0.12 offset( 152) = -5.02 offset( 153) = 4.25 offset( 154) = 3.84 offset( 155) = 13.34 offset( 156) = 16.79 offset( 157) = -36.21 offset( 158) = -2.18 offset( 159) = 12.94 offset( 160) = 2.05 offset( 161) = -17.31 offset( 162) = 18.38 offset( 163) = -7.17 offset( 164) = 6.59 offset( 165) = -13.36 offset( 166) = -12.11 offset( 167) = -3.91 offset( 168) = 10.97 offset( 169) = -25.72 offset( 170) = -11.53 offset( 171) = 1.94 offset( 172) = -12.76 offset( 173) = 18.55 offset( 174) = 13.49 offset( 175) = -9.45 offset( 176) = -10.19 offset( 177) = 18.69 offset( 178) = 24.49 offset( 179) = 30.44 offset( 180) = 41.95 offset( 181) = 1.55 offset( 182) = 20.88 offset( 183) = 4.76 offset( 184) = 15.80 offset( 185) = 12.37 offset( 186) = -13.03 offset( 187) = 15.64 offset( 188) = -8.44 offset( 189) = -3.02 offset( 190) = 10.57 offset( 191) = 6.88 offset( 192) = -17.81 offset( 193) = -5.77 offset( 194) = -18.29 offset( 195) = 17.62 offset( 196) = -30.66 offset( 197) = -7.37 offset( 198) = 36.32 offset( 199) = 3.42 offset( 200) = -21.92 offset( 201) = 15.88 offset( 202) = -17.33 offset( 203) = -2.71 offset( 204) = -21.06 offset( 205) = -4.53 offset( 206) = -1.59 offset( 207) = -9.54 offset( 208) = -0.04 offset( 209) = 23.57 offset( 210) = 13.83 offset( 211) = -9.28 offset( 212) = 12.42 offset( 213) = 23.85 offset( 214) = 7.90 offset( 215) = -7.29 offset( 216) = 26.18 offset( 217) = 33.05 offset( 218) = 32.10 offset( 219) = -8.10 offset( 220) = 16.16 offset( 221) = 3.94 offset( 222) = -18.22 offset( 223) = -16.84 offset( 224) = 5.79 offset( 225) = 21.07 offset( 226) = 45.18 offset( 227) = -13.85 offset( 228) = 6.76 offset( 229) = 13.59 offset( 230) = 8.28 offset( 231) = -9.32 offset( 232) = 21.30 offset( 233) = 7.02 offset( 234) = 24.11 offset( 235) = 16.26 offset( 236) = 11.46 offset( 237) = 2.16 offset( 238) = 7.19 offset( 239) = 18.45 offset( 240) = 6.65 offset( 241) = 6.56 offset( 242) = -33.59 offset( 243) = 14.71 offset( 244) = 21.28 offset( 245) = -0.73 offset( 246) = -10.29 offset( 247) = 28.50 offset( 248) = -11.37 offset( 249) = -18.92 offset( 250) = 23.12 offset( 251) = 8.87 offset( 252) = 9.64 offset( 253) = 16.43 offset( 254) = -2.70 offset( 255) = 26.14 offset( 256) = -4.99 offset( 257) = -10.88 offset( 258) = 27.41 offset( 259) = -3.48 offset( 260) = -11.18 offset( 261) = 12.60 offset( 262) = 22.19 offset( 263) = -20.16 offset( 264) = 20.32 offset( 265) = 9.66 offset( 266) = 13.30 offset( 267) = -12.64 offset( 268) = 53.69 offset( 269) = 23.15 offset( 270) = 43.60 offset( 271) = 48.58 offset( 272) = -13.12 offset( 273) = -12.57 offset( 274) = 35.19 offset( 275) = 14.84 offset( 276) = 33.05 offset( 277) = 13.73 offset( 278) = 45.45 offset( 279) = 55.49 offset( 280) = 48.13 offset( 281) = 3.86 offset( 282) = 28.44 offset( 283) = 23.73 offset( 284) = 11.53 offset( 285) = -19.46 offset( 286) = 10.81 offset( 287) = 17.23 offset( 288) = -13.85 offset( 289) = 30.17 offset( 290) = 10.70 offset( 291) = 28.06 offset( 292) = -14.35 offset( 293) = 23.46 offset( 294) = 15.16 offset( 295) = -25.15 offset( 296) = -15.03 offset( 297) = -24.74 offset( 298) = -5.94 ... 215 more lines ...
	217	Tue Apr 13 14:24:48 2021	TD	S460 information
aida-gsi Anydesk 897170655 DESPEC remote working - https://sf.gsi.de/d/a4fb2134e06a450ca777/ S460 shift plan - https://docs.google.com/spreadsheets/d/1hjNM5xdPoxq0MfNE5ILnNrHm2QKW7Pgp1UKF7p70ghQ/edit#gid=1097596683 Mattermost - https://mattermost.gsi.de/despec/channels/aida DESPEC Zoom meeting Zoom Meeting https://gsi-fair.zoom.us/j/94404952361 Passcode: s460
	174	Fri Mar 5 23:45:41 2021	TD	S452 information
aida-gsi Anydesk 897170655 DESPEC remote working - https://sf.gsi.de/d/a4fb2134e06a450ca777/ S452 shift checks - attachment 1 S452 shift plan - PDF attachment 2 - Google doc https://docs.google.com/spreadsheets/d/1hjNM5xdPoxq0MfNE5ILnNrHm2QKW7Pgp1UKF7p70ghQ/edit#gid=1745844766 Mattermost - https://mattermost.gsi.de/despec/channels/experiment-s452-nearline-sort DESPEC Zoom meeting Join Zoom Meeting https://gsi-fair.zoom.us/j/98980822569 Meeting ID: 989 8082 2569 Passcode: S452 FRS Zoom meeting Meeting-ID: 973 4809 5114 password: FRS-BT2021 Kenncode: 456657
Attachment 1: S452__Shifts_checkpoints_v1_(1).pdf

Attachment 2: S452_Shift_Plan.pdf

	170	Thu Mar 4 11:03:04 2021	NH	S452 Operating Notes
Please note the following "quirks" currently present in S452 that are important a) Strips/Thresholds Thresholds are 0xA, 0xA, 0x10 [Maybe changed depending on rate, etc] Some strips are very noisy - damage? b) Powering FEE64s Due to a misbehaving USB hub(?) or cable only 7 FEE TTYs are monitored aida04 and aida05 can take minutes to start, unsure why. aida05 is monitored on nnrpi1 and hence when aida05 is ready it is safe to assume all 12 are ready Watch the logs as normal c) Slow control & nnrpi2 For the Grafana script to read the DSSD HV, it must be ran in a screen session If nnrpi2 is restarted please run the HV as a screen by Putty SSHing (localhost 22) and running screen -S caenhv /dev/ttyACM0 if screen was just closed you can do screen -x caenhv to reconnect The pulser ideally should be started the same screen -S pulser /dev/ttyUSB0 To allow remote changing by NH/GSI The pulser is sent to all subsystems for correlation and should be kept on at 2 Hz for the experiment IN the pulser putty you can check the settings by typing display settings And general commands: help The NIM crate can be monitored /dev/ttyUSB2 but you should be careful It is very easy to turn off the NIM crate if you do I run it in a tmux session with ( tmux attach -r ) to have it "readonly" There is a small script on nnrpi2 ./check_usbs.sh to see which ttyUSB is which device As they can change if the pi is rebooted d) Scaler Readout If powercycled FEEs, enable the scaler in Local Controls page by setting BuTiS interface control to 0x3 To enable scaler readout after GOing the run please open the Correlation Control page (Act on all FEE64s) and set control to 0x1 This has to be done every time the FEE64s are set to GOing e) New Tape Server For waveform readout in future experiments, the tape server is in "Expert" mode which is harder to use Please read the "How to use" instructions by clicking the button on the bottom right Or in a terminal cat /MIDAS/TclHttpd/Html/ETape/1.txt f) GSI/MBS If GSI team ask to restart AIDA MBS you may need to restart the MBS relay so it can reconnect To start MBS in a terminal ssh despec@x86l-94 cd mbsrun/s452/aida_to_mbs mbs @startup It should report it connected to AIDA-3 - if not check the MBS relay is running or restart the relay Please check the MBS rate command rate -nst -rst -nev -rev -ndata -rdata -st That the "Streams" column does not frequently (ever) have 0 empty streams If so AIDA data may be getting dropped and should be looked into If another DESPEC DAQ has failed this will eventually happen and is not a problem But if it occurs in normal operation it is concerning Do NOT stop the AIDA run without talking to GSI team - if no AIDA data the whole MBS DAQ stops and blocks all other subsystems. It is best to keep AIDA ticking over constantly and let MBS start/stop files when relevant. Of course if things have to stop it is OK but inform GSI shifters so they can take action
	481	Tue Jun 14 12:15:33 2022	NH	S450 Archived
All MIDAS files for S450 (/TapeData/S450) have been copied to lustre and archived
Attachment 1: s450_aida_tape.txt
R1_0.gz: (0x00000009) exists archived, archive_id:13 R1_100.gz: (0x00000009) exists archived, archive_id:13 R1_101.gz: (0x00000009) exists archived, archive_id:13 R1_102.gz: (0x00000009) exists archived, archive_id:13 R1_103.gz: (0x00000009) exists archived, archive_id:13 R1_104.gz: (0x00000009) exists archived, archive_id:13 R1_105.gz: (0x00000009) exists archived, archive_id:13 R1_106.gz: (0x00000009) exists archived, archive_id:13 R1_107.gz: (0x00000009) exists archived, archive_id:13 R1_108.gz: (0x00000009) exists archived, archive_id:13 R1_109.gz: (0x00000009) exists archived, archive_id:13 R1_10.gz: (0x00000009) exists archived, archive_id:13 R1_110.gz: (0x00000009) exists archived, archive_id:13 R1_111.gz: (0x00000009) exists archived, archive_id:13 R1_112.gz: (0x00000009) exists archived, archive_id:13 R1_113.gz: (0x00000009) exists archived, archive_id:13 R1_114.gz: (0x00000009) exists archived, archive_id:13 R1_115.gz: (0x00000009) exists archived, archive_id:13 R1_116.gz: (0x00000009) exists archived, archive_id:13 R1_117.gz: (0x00000009) exists archived, archive_id:13 R1_118.gz: (0x00000009) exists archived, archive_id:13 R1_119.gz: (0x00000009) exists archived, archive_id:13 R1_11.gz: (0x00000009) exists archived, archive_id:13 R1_120.gz: (0x00000009) exists archived, archive_id:13 R1_121.gz: (0x00000009) exists archived, archive_id:13 R1_122.gz: (0x00000009) exists archived, archive_id:13 R1_123.gz: (0x00000009) exists archived, archive_id:13 R1_124.gz: (0x00000009) exists archived, archive_id:13 R1_125.gz: (0x00000009) exists archived, archive_id:13 R1_126.gz: (0x00000009) exists archived, archive_id:13 R1_127.gz: (0x00000009) exists archived, archive_id:13 R1_128.gz: (0x00000009) exists archived, archive_id:13 R1_129.gz: (0x00000009) exists archived, archive_id:13 R1_12.gz: (0x00000009) exists archived, archive_id:13 R1_130.gz: (0x00000009) exists archived, archive_id:13 R1_131.gz: (0x00000009) exists archived, archive_id:13 R1_132.gz: (0x00000009) exists archived, archive_id:13 R1_133.gz: (0x00000009) exists archived, archive_id:13 R1_134.gz: (0x00000009) exists archived, archive_id:13 R1_135.gz: (0x00000009) exists archived, archive_id:13 R1_136.gz: (0x00000009) exists archived, archive_id:13 R1_137.gz: (0x00000009) exists archived, archive_id:13 R1_138.gz: (0x00000009) exists archived, archive_id:13 R1_139.gz: (0x00000009) exists archived, archive_id:13 R1_13.gz: (0x00000009) exists archived, archive_id:13 R1_140.gz: (0x00000009) exists archived, archive_id:13 R1_141.gz: (0x00000009) exists archived, archive_id:13 R1_142.gz: (0x00000009) exists archived, archive_id:13 R1_143.gz: (0x00000009) exists archived, archive_id:13 R1_144.gz: (0x00000009) exists archived, archive_id:13 R1_145.gz: (0x00000009) exists archived, archive_id:13 R1_146.gz: (0x00000009) exists archived, archive_id:13 R1_147.gz: (0x00000009) exists archived, archive_id:13 R1_148.gz: (0x00000009) exists archived, archive_id:13 R1_149.gz: (0x00000009) exists archived, archive_id:13 R1_14.gz: (0x00000009) exists archived, archive_id:13 R1_150.gz: (0x00000009) exists archived, archive_id:13 R1_151.gz: (0x00000009) exists archived, archive_id:13 R1_152.gz: (0x00000009) exists archived, archive_id:13 R1_153.gz: (0x00000009) exists archived, archive_id:13 R1_154.gz: (0x00000009) exists archived, archive_id:13 R1_155.gz: (0x00000009) exists archived, archive_id:13 R1_156.gz: (0x00000009) exists archived, archive_id:13 R1_157.gz: (0x00000009) exists archived, archive_id:13 R1_158.gz: (0x00000009) exists archived, archive_id:13 R1_159.gz: (0x00000009) exists archived, archive_id:13 R1_15.gz: (0x00000009) exists archived, archive_id:13 R1_160.gz: (0x00000009) exists archived, archive_id:13 R1_161.gz: (0x00000009) exists archived, archive_id:13 R1_162.gz: (0x00000009) exists archived, archive_id:13 R1_163.gz: (0x00000009) exists archived, archive_id:13 R1_164.gz: (0x00000009) exists archived, archive_id:13 R1_165.gz: (0x00000009) exists archived, archive_id:13 R1_166.gz: (0x00000009) exists archived, archive_id:13 R1_167.gz: (0x00000009) exists archived, archive_id:13 R1_168.gz: (0x00000009) exists archived, archive_id:13 R1_169.gz: (0x00000009) exists archived, archive_id:13 R1_16.gz: (0x00000009) exists archived, archive_id:13 R1_170.gz: (0x00000009) exists archived, archive_id:13 R1_171.gz: (0x00000009) exists archived, archive_id:13 R1_172.gz: (0x00000009) exists archived, archive_id:13 R1_173.gz: (0x00000009) exists archived, archive_id:13 R1_174.gz: (0x00000009) exists archived, archive_id:13 R1_175.gz: (0x00000009) exists archived, archive_id:13 R1_176.gz: (0x00000009) exists archived, archive_id:13 R1_177.gz: (0x00000009) exists archived, archive_id:13 R1_178.gz: (0x00000009) exists archived, archive_id:13 R1_179.gz: (0x00000009) exists archived, archive_id:13 R1_17.gz: (0x00000009) exists archived, archive_id:13 R1_180.gz: (0x00000009) exists archived, archive_id:13 R1_181.gz: (0x00000009) exists archived, archive_id:13 R1_182.gz: (0x00000009) exists archived, archive_id:13 R1_183.gz: (0x00000009) exists archived, archive_id:13 R1_184.gz: (0x00000009) exists archived, archive_id:13 R1_185.gz: (0x00000009) exists archived, archive_id:13 R1_186.gz: (0x00000009) exists archived, archive_id:13 R1_187.gz: (0x00000009) exists archived, archive_id:13 R1_188.gz: (0x00000009) exists archived, archive_id:13 R1_189.gz: (0x00000009) exists archived, archive_id:13 R1_18.gz: (0x00000009) exists archived, archive_id:13 R1_190.gz: (0x00000009) exists archived, archive_id:13 R1_191.gz: (0x00000009) exists archived, archive_id:13 R1_192.gz: (0x00000009) exists archived, archive_id:13 R1_193.gz: (0x00000009) exists archived, archive_id:13 R1_194.gz: (0x00000009) exists archived, archive_id:13 R1_195.gz: (0x00000009) exists archived, archive_id:13 R1_196.gz: (0x00000009) exists archived, archive_id:13 R1_197.gz: (0x00000009) exists archived, archive_id:13 R1_198.gz: (0x00000009) exists archived, archive_id:13 R1_199.gz: (0x00000009) exists archived, archive_id:13 R1_19.gz: (0x00000009) exists archived, archive_id:13 R1_1.gz: (0x00000009) exists archived, archive_id:13 R1_200.gz: (0x00000009) exists archived, archive_id:13 R1_201.gz: (0x00000009) exists archived, archive_id:13 R1_202.gz: (0x00000009) exists archived, archive_id:13 R1_203.gz: (0x00000009) exists archived, archive_id:13 R1_204.gz: (0x00000009) exists archived, archive_id:13 R1_205.gz: (0x00000009) exists archived, archive_id:13 R1_206.gz: (0x00000009) exists archived, archive_id:13 R1_207.gz: (0x00000009) exists archived, archive_id:13 R1_208.gz: (0x00000009) exists archived, archive_id:13 R1_209.gz: (0x00000009) exists archived, archive_id:13 R1_20.gz: (0x00000009) exists archived, archive_id:13 R1_210.gz: (0x00000009) exists archived, archive_id:13 R1_211.gz: (0x00000009) exists archived, archive_id:13 R1_212.gz: (0x00000009) exists archived, archive_id:13 R1_213.gz: (0x00000009) exists archived, archive_id:13 R1_214.gz: (0x00000009) exists archived, archive_id:13 R1_215.gz: (0x00000009) exists archived, archive_id:13 R1_216.gz: (0x00000009) exists archived, archive_id:13 R1_217.gz: (0x00000009) exists archived, archive_id:13 R1_218.gz: (0x00000009) exists archived, archive_id:13 R1_219.gz: (0x00000009) exists archived, archive_id:13 R1_21.gz: (0x00000009) exists archived, archive_id:13 R1_220.gz: (0x00000009) exists archived, archive_id:13 R1_221.gz: (0x00000009) exists archived, archive_id:13 R1_222.gz: (0x00000009) exists archived, archive_id:13 R1_223.gz: (0x00000009) exists archived, archive_id:13 R1_224.gz: (0x00000009) exists archived, archive_id:13 R1_225.gz: (0x00000009) exists archived, archive_id:13 R1_226.gz: (0x00000009) exists archived, archive_id:13 R1_227.gz: (0x00000009) exists archived, archive_id:13 R1_228.gz: (0x00000009) exists archived, archive_id:13 R1_229.gz: (0x00000009) exists archived, archive_id:13 R1_22.gz: (0x00000009) exists archived, archive_id:13 R1_230.gz: (0x00000009) exists archived, archive_id:13 R1_231.gz: (0x00000009) exists archived, archive_id:13 R1_232.gz: (0x00000009) exists archived, archive_id:13 R1_233.gz: (0x00000009) exists archived, archive_id:13 R1_234.gz: (0x00000009) exists archived, archive_id:13 R1_235.gz: (0x00000009) exists archived, archive_id:13 R1_236.gz: (0x00000009) exists archived, archive_id:13 R1_237.gz: (0x00000009) exists archived, archive_id:13 R1_238.gz: (0x00000009) exists archived, archive_id:13 R1_239.gz: (0x00000009) exists archived, archive_id:13 R1_23.gz: (0x00000009) exists archived, archive_id:13 R1_240.gz: (0x00000009) exists archived, archive_id:13 R1_241.gz: (0x00000009) exists archived, archive_id:13 R1_242.gz: (0x00000009) exists archived, archive_id:13 R1_243.gz: (0x00000009) exists archived, archive_id:13 R1_244.gz: (0x00000009) exists archived, archive_id:13 R1_245.gz: (0x00000009) exists archived, archive_id:13 R1_246.gz: (0x00000009) exists archived, archive_id:13 R1_247.gz: (0x00000009) exists archived, archive_id:13 R1_248.gz: (0x00000009) exists archived, archive_id:13 R1_249.gz: (0x00000009) exists archived, archive_id:13 R1_24.gz: (0x00000009) exists archived, archive_id:13 R1_250.gz: (0x00000009) exists archived, archive_id:13 R1_251.gz: (0x00000009) exists archived, archive_id:13 R1_252.gz: (0x00000009) exists archived, archive_id:13 R1_253.gz: (0x00000009) exists archived, archive_id:13 R1_254.gz: (0x00000009) exists archived, archive_id:13 R1_255.gz: (0x00000009) exists archived, archive_id:13 R1_256.gz: (0x00000009) exists archived, archive_id:13 R1_257.gz: (0x00000009) exists archived, archive_id:13 R1_258.gz: (0x00000009) exists archived, archive_id:13 R1_259.gz: (0x00000009) exists archived, archive_id:13 R1_25.gz: (0x00000009) exists archived, archive_id:13 R1_260.gz: (0x00000009) exists archived, archive_id:13 R1_261.gz: (0x00000009) exists archived, archive_id:13 R1_262.gz: (0x00000009) exists archived, archive_id:13 R1_263.gz: (0x00000009) exists archived, archive_id:13 R1_264.gz: (0x00000009) exists archived, archive_id:13 R1_265.gz: (0x00000009) exists archived, archive_id:13 R1_266.gz: (0x00000009) exists archived, archive_id:13 R1_267.gz: (0x00000009) exists archived, archive_id:13 R1_268.gz: (0x00000009) exists archived, archive_id:13 R1_269.gz: (0x00000009) exists archived, archive_id:13 R1_26.gz: (0x00000009) exists archived, archive_id:13 R1_270.gz: (0x00000009) exists archived, archive_id:13 R1_271.gz: (0x00000009) exists archived, archive_id:13 R1_272.gz: (0x00000009) exists archived, archive_id:13 R1_273.gz: (0x00000009) exists archived, archive_id:13 R1_274.gz: (0x00000009) exists archived, archive_id:13 R1_275.gz: (0x00000009) exists archived, archive_id:13 R1_276.gz: (0x00000009) exists archived, archive_id:13 R1_277.gz: (0x00000009) exists archived, archive_id:13 R1_278.gz: (0x00000009) exists archived, archive_id:13 R1_279.gz: (0x00000009) exists archived, archive_id:13 R1_27.gz: (0x00000009) exists archived, archive_id:13 R1_280.gz: (0x00000009) exists archived, archive_id:13 R1_281.gz: (0x00000009) exists archived, archive_id:13 R1_282.gz: (0x00000009) exists archived, archive_id:13 R1_283.gz: (0x00000009) exists archived, archive_id:13 R1_284.gz: (0x00000009) exists archived, archive_id:13 R1_285.gz: (0x00000009) exists archived, archive_id:13 R1_286.gz: (0x00000009) exists archived, archive_id:13 R1_287.gz: (0x00000009) exists archived, archive_id:13 R1_288.gz: (0x00000009) exists archived, archive_id:13 R1_289.gz: (0x00000009) exists archived, archive_id:13 R1_28.gz: (0x00000009) exists archived, archive_id:13 R1_290.gz: (0x00000009) exists archived, archive_id:13 R1_291.gz: (0x00000009) exists archived, archive_id:13 R1_292.gz: (0x00000009) exists archived, archive_id:13 R1_293.gz: (0x00000009) exists archived, archive_id:13 R1_294.gz: (0x00000009) exists archived, archive_id:13 R1_295.gz: (0x00000009) exists archived, archive_id:13 R1_296.gz: (0x00000009) exists archived, archive_id:13 R1_297.gz: (0x00000009) exists archived, archive_id:13 R1_298.gz: (0x00000009) exists archived, archive_id:13 R1_299.gz: (0x00000009) exists archived, archive_id:13 R1_29.gz: (0x00000009) exists archived, archive_id:13 R1_2.gz: (0x00000009) exists archived, archive_id:13 R1_300.gz: (0x00000009) exists archived, archive_id:13 R1_301.gz: (0x00000009) exists archived, archive_id:13 R1_302.gz: (0x00000009) exists archived, archive_id:13 R1_303.gz: (0x00000009) exists archived, archive_id:13 R1_304.gz: (0x00000009) exists archived, archive_id:13 R1_305.gz: (0x00000009) exists archived, archive_id:13 R1_306.gz: (0x00000009) exists archived, archive_id:13 R1_307.gz: (0x00000009) exists archived, archive_id:13 R1_308.gz: (0x00000009) exists archived, archive_id:13 R1_309.gz: (0x00000009) exists archived, archive_id:13 R1_30.gz: (0x00000009) exists archived, archive_id:13 R1_310.gz: (0x00000009) exists archived, archive_id:13 R1_311.gz: (0x00000009) exists archived, archive_id:13 R1_312.gz: (0x00000009) exists archived, archive_id:13 R1_313.gz: (0x00000009) exists archived, archive_id:13 R1_314.gz: (0x00000009) exists archived, archive_id:13 R1_315.gz: (0x00000009) exists archived, archive_id:13 R1_316.gz: (0x00000009) exists archived, archive_id:13 R1_317.gz: (0x00000009) exists archived, archive_id:13 R1_318.gz: (0x00000009) exists archived, archive_id:13 R1_319.gz: (0x00000009) exists archived, archive_id:13 R1_31.gz: (0x00000009) exists archived, archive_id:13 R1_320.gz: (0x00000009) exists archived, archive_id:13 R1_321.gz: (0x00000009) exists archived, archive_id:13 R1_322.gz: (0x00000009) exists archived, archive_id:13 R1_323.gz: (0x00000009) exists archived, archive_id:13 R1_324.gz: (0x00000009) exists archived, archive_id:13 R1_325.gz: (0x00000009) exists archived, archive_id:13 R1_326.gz: (0x00000009) exists archived, archive_id:13 R1_327.gz: (0x00000009) exists archived, archive_id:13 R1_328.gz: (0x00000009) exists archived, archive_id:13 R1_329.gz: (0x00000009) exists archived, archive_id:13 R1_32.gz: (0x00000009) exists archived, archive_id:13 R1_330.gz: (0x00000009) exists archived, archive_id:13 R1_331.gz: (0x00000009) exists archived, archive_id:13 R1_332.gz: (0x00000009) exists archived, archive_id:13 R1_333.gz: (0x00000009) exists archived, archive_id:13 R1_334.gz: (0x00000009) exists archived, archive_id:13 R1_335.gz: (0x00000009) exists archived, archive_id:13 R1_336.gz: (0x00000009) exists archived, archive_id:13 R1_337.gz: (0x00000009) exists archived, archive_id:13 R1_338.gz: (0x00000009) exists archived, archive_id:13 R1_339.gz: (0x00000009) exists archived, archive_id:13 R1_33.gz: (0x00000009) exists archived, archive_id:13 R1_340.gz: (0x00000009) exists archived, archive_id:13 R1_341.gz: (0x00000009) exists archived, archive_id:13 R1_342.gz: (0x00000009) exists archived, archive_id:13 R1_343.gz: (0x00000009) exists archived, archive_id:13 R1_344.gz: (0x00000009) exists archived, archive_id:13 R1_345.gz: (0x00000009) exists archived, archive_id:13 R1_346.gz: (0x00000009) exists archived, archive_id:13 R1_347.gz: (0x00000009) exists archived, archive_id:13 R1_348.gz: (0x00000009) exists archived, archive_id:13 R1_349.gz: (0x00000009) exists archived, archive_id:13 R1_34.gz: (0x00000009) exists archived, archive_id:13 R1_350.gz: (0x00000009) exists archived, archive_id:13 R1_351.gz: (0x00000009) exists archived, archive_id:13 R1_352.gz: (0x00000009) exists archived, archive_id:13 R1_353.gz: (0x00000009) exists archived, archive_id:13 R1_354.gz: (0x00000009) exists archived, archive_id:13 R1_355.gz: (0x00000009) exists archived, archive_id:13 R1_356.gz: (0x00000009) exists archived, archive_id:13 R1_357.gz: (0x00000009) exists archived, archive_id:13 R1_358.gz: (0x00000009) exists archived, archive_id:13 R1_359.gz: (0x00000009) exists archived, archive_id:13 R1_35.gz: (0x00000009) exists archived, archive_id:13 R1_360.gz: (0x00000009) exists archived, archive_id:13 R1_361.gz: (0x00000009) exists archived, archive_id:13 R1_362.gz: (0x00000009) exists archived, archive_id:13 R1_363.gz: (0x00000009) exists archived, archive_id:13 R1_364.gz: (0x00000009) exists archived, archive_id:13 R1_365.gz: (0x00000009) exists archived, archive_id:13 R1_366.gz: (0x00000009) exists archived, archive_id:13 R1_367.gz: (0x00000009) exists archived, archive_id:13 R1_368.gz: (0x00000009) exists archived, archive_id:13 R1_369.gz: (0x00000009) exists archived, archive_id:13 R1_36.gz: (0x00000009) exists archived, archive_id:13 ... 2178 more lines ...
	521	Sun Oct 1 11:47:07 2023	TD	S4 cooling water
The photographs show the cooling water controls and temperature/pressure gauges outside S4 and the connections used by AIDA within S4.
Attachment 1: 1000007356.jpg

Attachment 2: 1000007355.jpg

	58	Mon Aug 5 12:57:48 2019	NH	S4 Conditions
Temp: 26 C Humidity: 50% Dew Point: ~15 C There are two temperature dials outside S4, one shows exactly 20 C and one shows nearer 16 C. Trying to clarify this discrepancy as 16 C is too cold at the moment. In contact with developer of cooling system to confirm apparent 16 C after the heat exchanger Today's conditions: Temp: 26.9 C Humidity: 48.7% Dewpoint 15.2 C

Goto page Previous 1, 2, 3 ... 13, 14, 15 ... 34, 35, 36 Next

ELOG V3.1.4-unknown