| ID |
Date |
Author |
Subject |
Text |
 |
|
190
|
Thu Sep 27 11:14:34 2018 |
CBH | Photos and Measurements from August CERN Trip | Chamber frame width=65cm
Chamber frame height=146cm
Chamber frame length=230cm
|
|
|
189
|
Mon Sep 24 14:44:48 2018 |
DK | ISOLDE vacuum schematic | Attached. PDF is produced with Gnome Dia
-- source file attached as well.
|
|
|
188
|
Thu Aug 30 15:14:50 2018 |
DK | Gate Valve | Some notes on the broken gate valve that should
go between SEC and our chamber at XT03. |
|
|
187
|
Thu Aug 23 18:57:15 2018 |
DK | What daid is taking from ISOLDE to Edinburgh | 1 bolt for chamber stand structure, for reference
for new struts.
|
|
|
186
|
Thu Aug 23 18:23:27 2018 |
DK | Where to find (our) stuff at ISOLDE | =Overview=
Shoes, hard hats, 'underpants', spiders, |
|
|
185
|
Thu Nov 23 13:16:56 2017 |
CLW | Beam energies | Beam energy measurements can be found in
the electronic logbook for ISO-REX-HIE
https://op-webtools.web.cern.ch/elogbook/ |
|
|
184
|
Thu Nov 16 16:24:29 2017 |
RG CLW MD | Run 173 Pulse Walkthrough HI n-side | Header: Pulser walkthrough, HI n-side, trigger
on HI detector this time
Ender: Change to digital pulser to check |
|
|
183
|
Thu Nov 16 16:14:04 2017 |
RG CLW MD | Run 172 Pulse Walkthrough HI n-side | Header: Pulser walkthrough, HI n-side
Ender: Change to digital pulser to check
as non-linearity was observed at low amplitudes. |
|
|
182
|
Thu Nov 16 16:06:07 2017 |
RG CLW MD | Run 171 Pulse Walkthrough HI n-side | Header: Pulser walkthrough, HI n-side
Ender: negative pulser, rise time 0.05 us,
fall time 1ms, delay .5 us,ref INT, width |
|
|
181
|
Thu Nov 16 15:57:29 2017 |
RG CLW MD | Run 170 Pulse Walkthrough HI p-side | Header: Pulser walkthrough, HI p-side
Ender: positive pulser, fall time 1ms, delay
250 ns, 10 V in steps of 1, 250 Hz
|
|
|
180
|
Thu Nov 16 15:43:48 2017 |
RG CLW MD | Run 169 Pulse Walkthrough E n-side | Header: Pulser walkthrough, E n-side
Ender: negative pulser, rise time 0.05 us,
fall time 1ms, delay .5 us,ref INT, width |
|
|
179
|
Thu Nov 16 15:37:35 2017 |
RG, MD, CLW | Run 167 JUNK | |
|
|
178
|
Thu Nov 16 15:33:24 2017 |
RG CLW MD | Run 168 Pulse Walkthrough E p-side | Header: Pulser walkthrough, E p-side
Ender: positive pulser, fall time 1ms, delay
250 ns, 6 V in steps of 0.5, 250 Hz
|
|
|
177
|
Thu Nov 16 15:24:42 2017 |
RG CLW MD | Run 166 Pulse Walkthrough dE n-side | Header: Pulser walkthrough, dE n-side
Ender: negative pulser, rise time 0.05 us,
fall time 1ms, delay .5 us,ref INT, width |
|
|
176
|
Thu Nov 16 15:14:39 2017 |
RG CLW MD | Run 165 Pulse Walkthrough dE p-side | Header: Pulser walkthrough, dE p-side
Ender: positive pulser, fall time 1ms, delay
250 ns, 1.6 V in steps of 0.2, 250 Hz
|
|
|
175
|
Thu Nov 16 11:20:51 2017 |
RG CLW MD | Run 162 -HI det calibration | Header: 4alpha source - Heavy Ion detector
calibration
Ender:
|
|
|
174
|
Wed Nov 15 16:24:35 2017 |
RG CLW | Run 160 - strip numbering E detector | Header: 4alpha source off center (to the top)
Ender:
====================================================
|
|
|
173
|
Wed Nov 15 16:05:25 2017 |
RG CLW | Run 159 - E detector calibration | Header: 4alpha source run for E det calubration
Ender:
====================================================
|
|
|
172
|
Wed Nov 15 15:41:41 2017 |
RG CLW | Run 157 - EJunk | Header: 4alpha source
Ender:
====================================================
|
|
|
171
|
Wed Nov 15 14:18:30 2017 |
DK | Issues and problems encountered | Objective log on perceived issues. (As a
benchmark, I enumerated 17 such issues on
my previous RIB experiment March 2017.)
|
|