AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA, Page 25 of 46
New
|
Find
|
Select
|
Import
|
Config
|
Last day
|
Help
Full
| Summary |
Threaded
-- All entries --
Last day
Last 3 Days
Last week
Last month
Last 3 Months
Last 6 Months
Last Year
918 Entries
Goto page
Previous
1
,
2
,
3
...
24
, 25,
26
...
44
,
45
,
46
Next
ID
Date
Author
Subject
Text
29
Mon Feb 9 11:52:52 2015
Patrick Coleman-Smith
[ How To ] Integrating AIDA with other systems
This document details how to integrate
AIDA with other systems.
34
Mon Feb 16 09:41:45 2015
Patrick Coleman-Smith
[How To] Set up the Raspberry Pi for PuTTY
When logged in and before opening PuTTY
open a cmdtool window.
cd /dev
35
Mon Feb 16 12:17:21 2015
Patrick Coleman-Smith
MACB update for 50Mhz external clock
This version of the MACB has an additional
selection at 5 for a ROOT module.
This will operate the Correlation
37
Tue Feb 17 08:03:32 2015
Patrick Coleman-Smith
[How To] Set up the Raspberry Pi for PuTTY
39
Wed Feb 18 11:25:54 2015
Patrick Coleman-Smith
Investigations into removing HV noise
With the system in T9 and a Keithley
Source Meter supplying HV to the detector.
The source meter supplies 200V and
52
Mon Mar 9 09:02:03 2015
Patrick Coleman-Smith
Adding Filters to the AIDA PSU.
This guide is to help with the filter
pcb assembly and installation into the AIDA
power supply.
79
Wed Apr 29 10:01:27 2015
Patrick Coleman-Smith
Fast Trigger output fault in FEE64 FPGA logic
The Fast Trigger output of the FEE64
is formed from the OR of the four OR16 signals
( one from each of the ASICs.
81
Wed Apr 29 11:34:09 2015
Patrick Coleman-Smith
Fast Trigger timings against Pulser Input and LEC/MEC Fast Comparator threshold setting
I have tried the latest version ( 26 )
of the FEE64 code and carried out some measurements
of the Fast Trigger delay from the Pulser
86
Thu Apr 30 15:28:25 2015
Patrick Coleman-Smith
High Energy Spectra from LYCCA with pulser
I have an eight FEE64 system now in place
on the LYCCA chamber with a PB-5 pulser going
into the adapter cards test input. The test
88
Thu Apr 30 17:43:36 2015
Patrick Coleman-Smith
High Energy Spectra from LYCCA with pulser
I have an eight FEE64 system now in place
on the LYCCA chamber with a PB-5 pulser going
into the adapter cards
89
Thu Apr 30 20:21:20 2015
Patrick Coleman-Smith
High Energy Spectra from LYCCA with pulser
> I have an eight FEE64 system now in place
on the LYCCA chamber with a PB-5 pulser going
into the adapter cards
111
Wed Jul 1 16:42:39 2015
Patrick Coleman-Smith
Testing Version 8
I have installed Version 8 of the AidaExec
program and FEE_GF_Feb15_6.bin for the VHDL
on the system in T9.
113
Thu Jul 16 15:10:34 2015
Patrick Coleman-Smith
[DAQ and VHDL] Changes to the Discriminator Information data item
I have attached a document describing
the new format of the Discriminator Information
data item used in Version 8
225
Fri May 13 13:24:42 2016
Patrick Coleman-Smith
An idea that might help when everything grinds to a halt
When using the T9 system and running with
too much rate in one FEE64 so the system
is unbalanced.
229
Mon May 23 09:17:55 2016
Patrick Coleman-Smith
Multiplicity Trigger Specification
Please read and comment on the attached
specification.
230
Mon May 23 17:21:29 2016
Patrick Coleman-Smith
[HowTo] A solution to the problem of no SYNCs
When starting Aida some FEE64 fail to provide
SYNC data , or any data for that matter,
on the ASIC data stream.
234
Tue May 24 08:28:28 2016
Patrick Coleman-Smith
[HowTo] Save power if not using the Waveforms and restart the Waveforms
The USB controlled power Relays are near their
AC fuse operating limit which has caused
some Fuse failures.
236
Wed May 25 18:51:54 2016
Patrick Coleman-Smith
[HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files
The attached firmware file, FEE_GF_Feb16_18.bin,
should be saved to /MIDAS/Aida and the FlashPgm.csh
file edited
237
Thu May 26 01:44:45 2016
Patrick Coleman-Smith
[HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files
Done. Awaiting test. See attachments 1-2.
239
Thu May 26 10:03:11 2016
Patrick Coleman-Smith
[HowTo] Specification Document for MACB including suggested setup.
Attached is the specification for the MACB
with the settings currently available.
Goto page
Previous
1
,
2
,
3
...
24
, 25,
26
...
44
,
45
,
46
Next
ELOG V3.1.4-unknown