| ID |
Date |
Author |
Subject |
Text |
 |
|
113
|
Thu Jul 16 15:10:34 2015 |
Patrick Coleman-Smith | [DAQ and VHDL] Changes to the Discriminator Information data item | I have attached a document describing
the new format of the Discriminator Information
data item used in Version 8 |
|
|
225
|
Fri May 13 13:24:42 2016 |
Patrick Coleman-Smith | An idea that might help when everything grinds to a halt | When using the T9 system and running with
too much rate in one FEE64 so the system
is unbalanced. |
|
|
229
|
Mon May 23 09:17:55 2016 |
Patrick Coleman-Smith | Multiplicity Trigger Specification | Please read and comment on the attached
specification. |
|
|
230
|
Mon May 23 17:21:29 2016 |
Patrick Coleman-Smith | [HowTo] A solution to the problem of no SYNCs | When starting Aida some FEE64 fail to provide
SYNC data , or any data for that matter,
on the ASIC data stream.
|
|
|
234
|
Tue May 24 08:28:28 2016 |
Patrick Coleman-Smith | [HowTo] Save power if not using the Waveforms and restart the Waveforms | The USB controlled power Relays are near their
AC fuse operating limit which has caused
some Fuse failures.
|
|
|
236
|
Wed May 25 18:51:54 2016 |
Patrick Coleman-Smith | [HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files | The attached firmware file, FEE_GF_Feb16_18.bin,
should be saved to /MIDAS/Aida and the FlashPgm.csh
file edited
|
|
|
237
|
Thu May 26 01:44:45 2016 |
Patrick Coleman-Smith | [HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files |
Done. Awaiting test. See attachments 1-2.
|
|
|
239
|
Thu May 26 10:03:11 2016 |
Patrick Coleman-Smith | [HowTo] Specification Document for MACB including suggested setup. | Attached is the specification for the MACB
with the settings currently available. |
|
|
240
|
Thu May 26 14:19:13 2016 |
Patrick Coleman-Smith | [HowTo] Access AIDA documentation | The latest version of the FEE64 software Interface
document ( May 2016 ) is available as a .pdf
from
|
|
|
268
|
Wed Jun 1 12:14:08 2016 |
Patrick Coleman-Smith | [HowTo] React to "Check Clock Status => FEE64 Failure" | If there are more than one failures then check
how they map to the MACB HDMI connections.
Are they all connected to the just one MACB |
|
|
325
|
Thu Jul 7 17:16:11 2016 |
Patrick Coleman-Smith | Install & Run new firmware with diagnostics for the SYNC | Connected to aidas from daresbury.
Started Firefox with windows for Rpi, Merge,
Runcontrol.
|
|
|
327
|
Thu Jul 14 16:55:32 2016 |
Patrick Coleman-Smith | Changes to AIDA software | An updated copy of the merger has been
downloaded ( merger64.AD ) with a copy of
/MIDAS/Merger/AIDA/Startup. |
|
|
328
|
Mon Jul 18 12:00:16 2016 |
Patrick Coleman-Smith | Report of remote operation of Aida at RIKEN 11/7 to 14/7 |
Normal
0
|
|
|
331
|
Thu Jul 28 11:35:58 2016 |
Patrick Coleman-Smith | [HowTo] Apply Thermal paste to FPGA | |
|
|
333
|
Mon Aug 1 11:30:07 2016 |
Patrick Coleman-Smith | First time remotely power up HV in RIKEN from Daresbury | Logged into aidas1 and opened the nnrpi1
relay control window ... powered up the FEE64s.
seperatly connected to ribfdaq and |
|
|
334
|
Mon Aug 15 09:55:08 2016 |
Patrick Coleman-Smith | Found a candidate for DAQ failure. | The problem :-
The DAQ stops working and can only
be fixed by a reboot of the FEE64s. |
|
|
335
|
Wed Aug 17 14:10:05 2016 |
Patrick Coleman-Smith | Linux Memory problem solutions for FEE64 | The problem indicated by "page allocation
failure" and the kernal subsequently
"killing" the AidaExecV8 process |
|
|
336
|
Wed Aug 17 14:44:52 2016 |
Patrick Coleman-Smith | [HowTo] start acquisition using the new "Start ASIC Readout" button | Due to sometimes operating with very noisy
systems, both at Daresbury and RIKEN, I have
installed a change to the startup of the |
|
|
343
|
Mon Aug 22 11:45:07 2016 |
Patrick Coleman-Smith | Software updated in Aida | Logged into aidas1, installed AidaExecV8
with a test of the time difference between
SYNC data items. Failure to be 0x40000 clocks |
|
|
359
|
Wed Sep 7 16:11:25 2016 |
Patrick Coleman-Smith | Updated layout.txt file in aidas1 | Used the layout reported in ELOG357 and
updated the layout.txt file used in the "Layout
and Status" browser window. |
|