10.37 Post - beam, AIDA & DTAS run only
      DTAS stop run 164
      AIDA file R2_1012

10.54 DTAS start run 165
      AIDA file R2_1015
      DTAS begins calibration with 24Na source

11.06 DAQ continues running OK
      All system wide checks ok *except* nnaida7 fails ADC calibration
      FEE64 temperature OK - see attach 1
      Good events rate OK - see attach 2
      Leakage currents OK - see attach 3
      Merger & Tape server OK - see 4 & 5

11.47 DTAS stop run 166
      AIDA file R2_1022

12.03 DTAS start run 167
      AIDA file R2_1025
      Caesium measurement

13.18 DTAS stop run 169
      AIDA file R2_1035

14.59 DTAS opens file run 172
      AIDA file R2_1049
      

14.57 DAQ continues OK file RIBF147/R2_352

      postrun background and gamma source tests

      ASIC settings 2019Jun13-08.56.35
      DSSSD#1 slow comparator 0x1d
      DSSSD#2 slow comparator 0x8

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 6 & 7

      FEE64 temperatures OK - see attachment 8

      good event statistics - OK - see attachment 9
      11x <20k 22x < 50k 23x <100k
      Merger - 1x Q 21 error  see attachment 10
      TapeServer OK - see attachment 11

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 12
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 13
      1.8.L spectra - see attachments 14 & 15
      nnaida1 78 ch FWHM, nnaida3 81 ch FWHM
      1.8.H spectra - see attachments 16 & 17

      FEE64 Rate spectra - attachment 18
      Check ASIC Control x1

11.04 analysis of file RIBF147/R2_1051 - attachment 19
      deadtime <<1% all FEE64s *except* nnaida19 ~2%
      no timewarps

16.00 AIDA file R2_1058
      DTAS sends sync pulse
      DTAS having issues with DAQ speed

16.30 DTAS stop 175
      AIDA file R2_1062

16.32 pulser walkthrough start

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 250Hz range, variable min. c. 25Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse
      
      90000 - 10000 in 10000 steps walkthrough file R3 - see attachments 20 & 21

      12000 - 2000 in 2000 steps walkthrough file R5 - see attachments 22 & 24

      ignore file R4

17.08 pulser walkthrough end

22.57 DAQ stop
      AIDA file TapeData/RIBF147/R6_49
      DTASD stop on run 191

09.30 DAQ found stopped, no merger error messages
      Most recent file R63_291, last accessed 06.46

      R63_291 ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R63_291
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      29203
          ADC data format:  237170622 ( 2006571.1 Hz)
        Other data format:    1096655 (    9278.2 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        113 (       1.0 Hz)
                               RESUME:        113 (       1.0 Hz)
                              SYNC100:    1077835 (    9119.0 Hz)
                           FEE64 disc:      15061 (     127.4 Hz)
                             MBS info:       3533 (      29.9 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        175 (       1.5 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      118.197 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.000 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       2.763 s
 FEE module #:   6 elapsed dead time       0.275 s
 FEE module #:   7 elapsed dead time       0.004 s
 FEE module #:   8 elapsed dead time       0.003 s
 FEE module #:   9 elapsed dead time       0.001 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.013 s
 FEE module #:  15 elapsed dead time       0.028 s
 FEE module #:  16 elapsed dead time       0.275 s
 FEE module #:  17 elapsed dead time       6.010 s
 FEE module #:  18 elapsed dead time       0.382 s
 FEE module #:  19 elapsed dead time       0.555 s
 FEE module #:  20 elapsed dead time       0.378 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.035 s
 FEE module #:  23 elapsed dead time       0.168 s
 FEE module #:  24 elapsed dead time       0.043 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   28.188s ( 1036.027 blocks/s,  64.752 Mb/s)


      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System-wide checks - SYNC errors & SYNC pulses fail - other checks OK - see attachments 4-7
      AIDA SYNC stats - see attachment 8

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

09.43 DAQ starts (R64)

18.25 DAQ stop OK
      Stop before 'scheduled' 18.30 DAQ stall

      System wide checks - SYNC count & SYNC errors fail - other checks OK - see attachments 8-11

18.49 DAQ start (R65)

      N.B. normal DAQ start - no DAQ RESET, SETUP, restart of merger & tapeserver etc

18.53 SYNC error counter baseline

19.21 DAQ found stalled
      Most recent files R65_12 last access 19.17

      Soft reset failed - nnaida4 connect timeouts - power cycle FEE64s 

20.02 DAQQ start (R66)

10.20 DAQ continues OK

10.29 DAQ stop June18/R1

      ASIC settings 2017Nov17-21.24.47
      *all* FEE64 slow comparators 0x64

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK
      PLL and DCM Clock Lock Monitor OK - see attachment 5

Image of interior of closed EURICA array with AIDA inserted.

09.33 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      7x FEE64s <10k
      4x FEE64s 10-20k
      6x FEE64s 20-30k
      2x FEE64s 30-40k
      0x FEE64s 40-50k
      5x FEE64 >50k (nnaida13 280k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 rate, 1.8.L, 1.8.W (20ms FSR) spectra - see attachments 5-10
      pulser peak width nnaida17 70 ch FWHM, nnaida8 72 ch FWHM

23/04/15

1800: Spent majority of the day moving AIDA forward and into EURICA.

          So far everything seems to fit very well, we have just noticed a few points of possible mechanical conflict that should be watched when inserting/removing AIDA into EURICA

• Overhead LN2 pipes are lower than the top of the FEE tower. These have been loosely cable tied to some other cables to keep them away from AIDA. Need to make sure they don't move upon filling of LN2
• Yellow water pipe at front of AIDA may be pinched by EURICA structure upon full closure. Will check first time we close.
• Horizontal screw at base of nose is the most rearward point of contact and means AIDA cannot be inserted further than this. Already sufficiently far into EURICA so not a problem in that sense.
• Table itself can be moved to within ~5cm of EURICA structure without disturbing cabling along floor too much or touching rails.
• Front leg fits easily under EURICA structure.

       Due to the number and file size of the photos, I can't upload them here so have made them available at:

            https://www.dropbox.com/sh/ho1c0ocgc7rjji4/AADNsFZjSi6-Tx5CfxBt1PKUa?dl=0

10.00 Investigating DSSD2 (MSL BB18-1000 3058-9) missing channels, found broken bond wires on rear side (~1/4).
      Replaced with 3058-3.
      Stack order now:
            |   3058-4
      beam  |   3058-3
            |   2998-23
            |   3058-5
            |   3058-6
            V   3058-7

12.00 All detectors, including the new replacement bias correctly (see att. 1).

14.00 Shunji has mentioned moving AIDA+BRIKEN forward by ~1m due to concerns about focusing the accurately at such a rearward position.
      The afternoon was spent removing the EURICA rails to enable the push forward of AIDA+BRIKEN.

18.00 The DAQ was set running with the new detector included. All system checks passed apart from nnaida19 ADC calibration.
      Pulser peak widths are mostly ~70-90ch for all FEEs. This is similar to Tuesday for the n-side FEEs (att. 2-4) and an improvement for the p-side FEEs (att. 5-7).
      Having said that, some spectra show peaks with shoulders or tails and a few feature multiple discreet peaks.
      We will look at this over the next couple of days, depending on when the final move/alignment of AIDA+BRIKEN is completed.

      Complete table of pulser FWHM

       nnaida# | Pulser FWHM (ch) |  Comments
          1    |       64         |
          2    |       168        |  Peak has shoulder
          3    |       77         |
          4    |       74         |
          5    |       79         |  Shoulder
          6    |       86         |  Shoulder
          7    |       80         |
          8    |       78         |
          9    |       68         |
          10   |       70         |
          11   |       80         |
          12   |       85         |
          13   |       70         |
          14   |       65         |
          15   |       92         |  Wide secondary peak in ASICs 1&4 of FWHM ~900ch @ 45k. Only few counts high (~1% height of pulser peak). Noise 10x height of pulser.
          16   |       99         |  Noise peak ~10x height of pulser peak.
          17   |       70         |  Low E tail.
          18   |       75         |
          19   |       96         |
          20   |       83         |
          21   |       68         |  Additional peaks either side of pulser: approx. relative heights > (1/30) (1) (1/100)
          22   |       69         |
          23   |       108        |  Noise peak ~10x height of pulser peak.
          24   |       110        |  Noise peak ~10x height of pulser peak.

10.05 DSSSD bias & leakage currents OK - see attachments 1 & 2
      note - the significant increase observed yesterday appears to be plateau'ing
      FEE64 temperatures OK - see attachment 3

10.19 System-wide tests - see attachments 4-17
      Clock status fails for varying combinations of nnaida5, 7, 8, 15 & 16
      ADC calibration fails for nnaida23
      All other tests OK

10.27 LOCAL controls for nnaida5, 6, 7, 8, 15 & 16 - see attachments 18-23

10.37 Start DAQ (Nov2016/R1)

      Analysis of R1_0 demonstrates ADC & disc data synchronised - see attachments 24 & 25
      Analysis of R1_0 - see attachment 26
      
20.10 Successfully restarted the DAQ after fill cycle stop.
      Bias and leakage currents ok (attachments 27+28).
      Temps ok (attachment 29).

11.40 R9 continues

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      External (random) trigger from EG&G Ortec 462 Start output (Range 81.92us) - frequency c. 120Hz

      B2F/F11 temp +25.2 deg C, d.p. +14.5 deg C, RH 50.4%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      Some error messages observed for merger - see attachment 4-6
      All related to Q5 (nnaida6)

      System-wide checks OK - see attachments 7-12

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6, nnaida5 & nnaida20
statistics - see attachments
13-20

      Analysis of R9_213 shows data synchronised - see attachment 21

      FEE # versus timestamp (0.1ms / channel)
      Note nnaida19 not currently configured

10.10 DAQ continues OK 
      Current file May2017/R26_17

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)
      

10.17 E17/F11 ambient temperature +24.2 deg C, RH 42.8%, d.p. +10.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)

      Lights on B2 partially off - Alvaro TD reports this may imply beam tests being carried out. He also
reports spike of gamma counts in BRIKEN clover around 10:00.

10.18 DAQ stops OK
      Current file May2017/R26_17

      Zeroed histograms. Background alpha calibration long run ongoing.

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0x20

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

10.25 DAQ stars OK
      Current file may2017/R27

      ttyUSB7 (nnaida1) attached

10.50 Measured AIDA ac mains voltage with DMM. Voltage 100.4V rms L-N
      FL11006 chiller refilled (2 litres added) 

17.05 DAQ continues OK 
      Current file May2017/R26_17

      Detector biases; leakage currents OK - see attachment 6,7
      FEE64 Temperatures OK - see attachment 8
      good events; statistics OK - see attachment 9
      No warnings/errors reported by merger since DAQ GO - see attachment 10

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)

17.07 E17/F11 ambient temperature +24.1 deg C, RH 39.8%, d.p. +9.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 95%)

      Left DAQ running on alpha background calibration run


      

11.45 AIDA discriminator rates - see attachment 1
      Today's rates similar to yesterday's rates 

14.00 Commence positioning of AIDA. Adjust stand height using laser scanner and aligned to wall
      references. Determine that the most forward position AIDA DSSSD#1 is ~3cm downstream of
      EURICA centre. Need to move DSSSDs ~6cm upstream and lengthen DSSSD - AIDA adpptor PCB 
      cabling. In progress.

20.50 Update /etc/dhcp/dhcpd.conf 

      nnaida19 is faulty, nnaida28 is not used - see https://elog.ph.ed.ac.uk/AIDA/193
      We have swapped FEE modules for nnaida19/20 for nnaida27/28 such that nnaida19 -> 28, nnaida20 -> 27,
      nnaida27 -> 19, nnaida28 -> 20. 
      The power cables for nnaida19 and nnaida28 have also been swapped - the power cable to nnaida19
      *might* be faulty as we have experienced problems at this crate position before. Also swapped
      AIDA FEE PSU outlets to ensure pairs of FEE64 cards are powered from the same PSU outlet.
 
[root@aidas1 dhcp]# diff dhcpd.conf dhcpd.conf.BAK-260516
205,206c205,206
<    host nnaida19 {
<      hardware ethernet 00:04:a3:2a:ed:9a;
---
>    host nnaida19 {
>      hardware ethernet 00:04:a3:2b:09:e7;
210,211c210,211
<    host nnaida20 {
<      hardware ethernet 00:04:a3:2b:11:c5;
---
>    host nnaida20 {
>      hardware ethernet 00:04:a3:2b:22:55;
225,226c225,227
<    host nnaida27 {
<      hardware ethernet 00:04:a3:2b:22:55;
---
> # 2 of 2 scratch FEE modules assembled by PJCS April 2016
>    host nnaida27 {
>      hardware ethernet 00:04:a3:2a:ed:9a;
230,232c231,232
< # 2 of 2 scratch FEE modules assembled by PJCS April 2016
<    host nnaida28 {
<      hardware ethernet 00:04:a3:2b:09:e7;
---
>    host nnaida28 {
>      hardware ethernet 00:04:a3:2b:11:c5;
[root@aidas1 dhcp]# cat dhcpd.conf
#
# DHCP Server Configuration file.
#   see /usr/share/doc/dhcp*/dhcpd.conf.sample  
#

authoritative;

ddns-update-style none; ddns-updates off;

max-lease-time 691200;

option domain-search code 119 = string;

subnet 10.1.1.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.1.255;
   option routers 10.1.1.250;
   pool {
      range 10.1.1.100 10.1.1.249;
   }
}

subnet 10.1.2.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.2.255;
   option routers 10.1.2.250;
   pool {
      range 10.1.2.100 10.1.2.249;
   }
}

subnet 10.1.3.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.3.255;
   option routers 10.1.3.250;
   pool {
      range 10.1.3.100 10.1.3.249;
   }
}

subnet 10.1.4.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.4.255;
   option routers 10.1.4.250;
   pool {
      range 10.1.4.100 10.1.4.249;
   }
}

subnet 10.1.5.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.5.255;
   option routers 10.1.5.250;
   pool {
      range 10.1.5.100 10.1.5.249;
   }
}

group {
   use-host-decl-names true;
   default-lease-time 3600;
   max-lease-time 14400;

   server-name "10.1.1.250";
   next-server 10.1.1.250;

   host nnrpi1 {
     hardware ethernet b8:27:eb:78:ee:44;
     fixed-address 10.1.1.251;
   }
   host nnaida1 {
     hardware ethernet 00:04:a3:2a:d0:1b;
     fixed-address 10.1.1.1;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida1,tcp";
   }
   host nnaida2 {
     hardware ethernet 00:04:a3:2a:d9:e1;
     fixed-address 10.1.1.2;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida2,tcp";
   } 
   host nnaida5 {
     hardware ethernet 00:04:a3:2a:d0:10;
     fixed-address 10.1.1.5;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida5,tcp";
   }
   host nnaida6 {
     hardware ethernet 00:04:a3:2a:d4:b7;
     fixed-address 10.1.1.6;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida6,tcp";
   }
   host nnaida9 {
     hardware ethernet 00:04:a3:2a:d9:ad;
     fixed-address 10.1.1.9;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida9,tcp";
   }
   host nnaida10 {
     hardware ethernet 00:04:a3:2a:f7:07;
     fixed-address 10.1.1.10;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida10,tcp";
   }
   host nnaida13 {
     hardware ethernet 00:04:a3:2b:11:b9;
     fixed-address 10.1.1.13;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida13,tcp";
   }
   host nnaida14 {
     hardware ethernet 00:04:a3:2b:11:b8;
     fixed-address 10.1.1.14;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida14,tcp";
   }
   host nnaida17 {
     hardware ethernet 00:04:a3:2a:d9:cc;
     fixed-address 10.1.1.17;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida17,tcp";
   }
   host nnaida18 {
     hardware ethernet 00:04:a3:2a:b2:b2;
     fixed-address 10.1.1.18;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida18,tcp";
   }
   host nnaida21 {
     hardware ethernet 00:04:a3:2b:27:23;
     fixed-address 10.1.1.21;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida21,tcp";
   }
   host nnaida22 {
     hardware ethernet 00:04:a3:2a:f6:e9;
     fixed-address 10.1.1.22;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida22,tcp";
   }
   host nnaida25 {
     hardware ethernet 00:04:a3:2a:d0:11;
     fixed-address 10.1.1.25;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida25,tcp";
   }
   host nnaida26 {
     hardware ethernet 00:04:a3:2b:27:54;
     fixed-address 10.1.1.26;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida26,tcp";
   }
   host nnaida29 {
     hardware ethernet 00:04:a3:2a:d0:06;
     fixed-address 10.1.1.29;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida29,tcp";
   }
   host nnaida30 {
     hardware ethernet 00:04:a3:2a:d9:b6;
     fixed-address 10.1.1.30;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida30,tcp";
   }


}


group {
   use-host-decl-names true;
   default-lease-time 3600;
   max-lease-time 14400;

   server-name "10.1.2.250";
   next-server 10.1.2.250;

   host nnaida3 {
     hardware ethernet 00:04:a3:2a:f7:06;
     fixed-address 10.1.2.3;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida3,tcp";
   }
   host nnaida4 {
     hardware ethernet 00:04:a3:2a:ed:b8;
     fixed-address 10.1.2.4;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida4,tcp";
   }
   host nnaida7 {
     hardware ethernet 00:04:a3:2a:b8:8d;
     fixed-address 10.1.2.7;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida7,tcp";
   }
   host nnaida8 {
     hardware ethernet 00:04:a3:2a:9c:07;
     fixed-address 10.1.2.8;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida8,tcp";
   }
   host nnaida11 {
     hardware ethernet 00:04:a3:2b:11:af;
     fixed-address 10.1.2.11;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida11,tcp";
   }
   host nnaida12 {
     hardware ethernet 00:04:a3:2a:d0:2f;
     fixed-address 10.1.2.12;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida12,tcp";
   }
   host nnaida15 {
     hardware ethernet 00:04:a3:2a:f3:ac;
     fixed-address 10.1.2.15;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida15,tcp";
   }
   host nnaida16 {[root@aidas1 aidas1]# diff startup.tcl startup.tcl.BAK-260516
31,32c31,32
<     variable PACQSERVERS; set PACQSERVERS { nnaida1 nnaida2 nnaida5 nnaida6  nnaida9 nnaida10 nnaida13
nnaida14 nnaida17 nnaida18 nnaida21 nnaida22 nnaida25 nnaida26 nnaida29 nnaida30 }
<     variable NACQSERVERS; set NACQSERVERS { nnaida3 nnaida4 nnaida7 nnaida8 nnaida11 nnaida12 nnaida15
nnaida16 nnaida19 nnaida20 nnaida23 nnaida24 nnaida27 nnaida28 nnaida31 nnaida32 }
---
>     variable PACQSERVERS; set PACQSERVERS { nnaida1 nnaida2 nnaida5 nnaida6  nnaida9 nnaida10 nnaida13
nnaida14 nnaida17 nnaida18 nnaida21 nnaida22 nnaida25 nnaida29 nnaida30 }
>     variable NACQSERVERS; set NACQSERVERS { nnaida3 nnaida4 nnaida7 nnaida8 nnaida11 nnaida12 nnaida15
nnaida16 nnaida20 nnaida23 nnaida24 nnaida27 nnaida28 nnaida31 nnaida32 }
33a34
> # startup.tcl.BAK-130516 has all 32 NNAIDA modules included
52c53
<     lappend ACQSERVERS nnaida19
---
> #    lappend ACQSERVERS nnaida19
59c60
<     lappend ACQSERVERS nnaida26
---
> #    lappend ACQSERVERS nnaida26

     hardware ethernet 00:04:a3:2a:9c:0e;
     fixed-address 10.1.2.16;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida16,tcp";
   }
# 1 of 2 scratch FEE modules assembled by PJCS April 2016
   host nnaida19 {
     hardware ethernet 00:04:a3:2a:ed:9a;
     fixed-address 10.1.2.19;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida19,tcp";
   }
   host nnaida20 {
     hardware ethernet 00:04:a3:2b:11:c5;
     fixed-address 10.1.2.20;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida20,tcp";
   }
   host nnaida23 {
     hardware ethernet 00:04:a3:2a:b8:90;
     fixed-address 10.1.2.23;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida23,tcp";
   }
   host nnaida24 {
     hardware ethernet 00:04:a3:2a:b6:45;
     fixed-address 10.1.2.24;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida24,tcp";
   }
   host nnaida27 {
     hardware ethernet 00:04:a3:2b:22:55;
     fixed-address 10.1.2.27;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida27,tcp";
   }
# 2 of 2 scratch FEE modules assembled by PJCS April 2016
   host nnaida28 {
     hardware ethernet 00:04:a3:2b:09:e7;
     fixed-address 10.1.2.28;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida28,tcp";
   }
   host nnaida31 {
     hardware ethernet 00:04:a3:2b:11:ae;
     fixed-address 10.1.2.31;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida31,tcp";
   }
   host nnaida32 {
     hardware ethernet 00:04:a3:2a:ed:b9;
     fixed-address 10.1.2.32;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida32,tcp";
   }
}


group {
# 8 days
   default-lease-time 691200;

#    option dhcp-client-identifier "\0foo";

   host nndhcp052 {
# Analysis server
     hardware ethernet 00:22:19:50:02:40;
     fixed-address 10.1.1.252;
   }

}


DAQ server configuration file /MIDAS/config/TclHttpd/aidas1/startup.tcl update - see attachment 2

[root@aidas1 aidas1]# diff startup.tcl startup.tcl.BAK-260516
31,32c31,32
<     variable PACQSERVERS; set PACQSERVERS { nnaida1 nnaida2 nnaida5 nnaida6  nnaida9 nnaida10 nnaida13
nnaida14 nnaida17 nnaida18 nnaida21 nnaida22 nnaida25 nnaida26 nnaida29 nnaida30 }
<     variable NACQSERVERS; set NACQSERVERS { nnaida3 nnaida4 nnaida7 nnaida8 nnaida11 nnaida12 nnaida15
nnaida16 nnaida19 nnaida20 nnaida23 nnaida24 nnaida27 nnaida28 nnaida31 nnaida32 }
---
>     variable PACQSERVERS; set PACQSERVERS { nnaida1 nnaida2 nnaida5 nnaida6  nnaida9 nnaida10 nnaida13
nnaida14 nnaida17 nnaida18 nnaida21 nnaida22 nnaida25 nnaida29 nnaida30 }
>     variable NACQSERVERS; set NACQSERVERS { nnaida3 nnaida4 nnaida7 nnaida8 nnaida11 nnaida12 nnaida15
nnaida16 nnaida20 nnaida23 nnaida24 nnaida27 nnaida28 nnaida31 nnaida32 }
33a34
> # startup.tcl.BAK-130516 has all 32 NNAIDA modules included
52c53
<     lappend ACQSERVERS nnaida19
---
> #    lappend ACQSERVERS nnaida19
59c60
<     lappend ACQSERVERS nnaida26
---
> #    lappend ACQSERVERS nnaida26

Need to update nnaida19 and nnaida26 to latest firmware version - see https://elog.ph.ed.ac.uk/AIDA/237

02.37 DAQ stalled - USB-controlled ac mains relay fuse blown
      Not writing to disk

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa

      Detector biases & leakage currents OK - see attachments 1 & 2
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Ambient temperature +24.3 deg C, d.p. +8.7 deg C, RH 37.1%

02.54 Replace 250V/16A fuse and power up

      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachments 4

03:30 Stats with nnaida13 slow comparator threshold raised to 140keV - Attachment 5

03:50 Pulser widths done, slow comparator threshold raised to 0xc ~120keV for  nnaida 19-22
      Statistics - Attachment 6

05:40 Beam now going into F11. Wasabi and YSol in front of AIDA
      AIDA is seeing light particles
      Waveforms look good
      Layout 7 - Attachment 7
      layout 8 - Attachment 8
      Statistics with light particles going through - Attachment 9
      Bias and leakage currents ok - Attachment 10

      We are taking the light ion data to file in R17_*

06:50 Light ion data continues
      System wide checks all ok

07:22 Bias and leakage ok - Attachment 11
      FEE Temperatures ok - Attachment 12
      Stats - Attachment 13

08:15 Light ions stop still writing file

08:27 Beam into aida run R17_30
      Zero degrader, just 4mm of WAS3ABI
      WAS3ABI run 120
      BRIKEN started run at 08:27 run 18
      BIGRIPS Run 8
      Timestamp reset at 08:27
      Stats with beam - Attachment 14

08:44 Waveforms with implants in the detector
      Layout 7 - Attachments 15 & 16
      Layout 8 - Attachments 17 & 18
      Layout 1  linear and log attachments 19 & 20 
      Leakage and bias ok - Attachment 21

09:14 Just noticed the stats in nnaida13 has dropped rate. Noise source may have been turned off
      Statistics - Attachment 22

      Spectra from the 0mm degrader run - Attachments 22-27

09:20 BRIKEN and WAS3ABI stop on run 162 aida on R17_35
      1mm degrader moved in
      BigRIPS on run 9
      BRIKEN run 19
      WAS3ABI start on 163
      AIDA on R17_35

      Rates similar to last screenshot of stats 09:14

09:26 Leakage and bias ok - Attachment 28

09:41 Beam stops
      AIDA on file R17_37
      BRIKEN stops running
      WAS3ABI on run 178

AIDA Files written
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:22 R17_29
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:31 R17_30
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:40 R17_31
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:50 R17_32
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:00 R17_33
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:10 R17_34
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:21 R17_35
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:31 R17_36
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:42 R17_37
-rw-rw-rw-. 1 npg npgstaff 329M Oct 26 09:44 R17_38

14.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

14.35 DAQ restarted for test purposes

18.55 DAQ stalled as expected
      Most recent file R83_125 last accessed 18.30

      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      All system-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

20.48 DAQ starts (R86)
      LEC/MEC fast comparator 0xff -> 0x20

17.00 USB-controlled ac mains relay - no water interlock ( yellow ) LED
      Water temperature ( station outside S4 entrance ) c. 19 deg C and pressure OK
      Flow can be felt on rubber outflow pipe from water manifold

      Failure of sensor or interlock box?

      *** Bypass interlock

16.58 Power ON

17.05 FEE64 temperatures OK - see attachment 


      All system wide checks OK

      per FEE64 p+n 1.8.W spectra - attachments 2-42021Apr29-13-16-00
      per FEE64 p+n 1,8.L spectra - attachment 5
       aida01 pulser peak width 15 ch FWHM
      per FEE64 Rate spectra - attachment 6 


      BNC PB-5 pulser
      Amplitude 10.0V
      Attenuation x10
      Decay 1ms
      Frequency 25Hz
      Polarity + ( n+n Ohmic test input from EG&G Ortec 534 Sum & Invert Amplifier not connected )
      Clamp ON

      ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64

17.28 FEE64 temperatures - attachment 7
       all < 1 deg C difference cf. 17.05
      ADC data item stats OK - attachment 8

19.06 FEE64 temperatures OK - attachment 9

10:18 Bias and leakage currents ok - attachment 1
      FEE Temperatures ok
      System wide checks all ok
      Currently on file R9_63
      Humidity 43.3%, Temperature 25.1C, Dew Point +11.8C
      Filler level ok

12:51 Bias and leakage currents ok - attachment 2
      FEE Temperatures ok
      System wide checks all ok
      Currently on file R9_64

19:20 Bias and leakage currents - attachment 3
      FEE temperatures ok
      System wide checks all ok
      Currently on file R9_65
      ASIC 2 is still missing from FEE29. ASIC checks earlier in the afternoon have failed to recover it. -
attachment 4
      This ASIC has been observed to be working since it was installed last week. Once the alpha run is over
further attempts
      will be made to test it is back.

11.20 R1 stops

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

      No merger error messages - see attachment 4

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5,
nnaida19 & nnaida20 statistics - see attachments 5-15

      Analysis of R1_304 - ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R1_304
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      28207
          ADC data format:  105059677 (  495121.2 Hz)
        Other data format:  125077092 (  589458.4 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        143 (       0.7 Hz)
                               RESUME:        143 (       0.7 Hz)
                              SYNC100:    1940061 (    9143.0 Hz)
                           FEE64 disc:  123135099 (  580306.3 Hz)
                             MBS info:       1646 (       7.8 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        543 (       2.6 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      212.190 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.906 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       3.664 s
 FEE module #:   6 elapsed dead time       0.681 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.019 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.003 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.144 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.753 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.108 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    8.492s ( 3321.523 blocks/s, 207.595 Mb/s)

11.32 DSSSD Bias off
      FEE64 power off

17.00 nnaida1/nnaida2 & nnaida9/nnaida10
      AIDA adaptor PCB rev C -> AIDA adaptor PCB rev D

      Adaptor PCB damaged during re-install of AIDA DSSSD mounting bracket
      to adjust to vertical.

      nnaida13/nnaida14
      AIDA adaptor PCB rev D -> AIDA adaptor PCB rev D

10.20 DSSSD bias +100V leakage current +6.565uA - attachment 1

      All system wide checks OK - attachments 2-7
       why is SYNC rollover target 0xe?

      FEE64 temps OK - attachment 8

      per FEE64 1.8.W spectra 20us FSR - attachments 9-10
      slow comparator 0x64
      per FEE64 rate spectra - attachment 11
      ADC data item stats - attachment 12

      slow compararator 0x14
      ADC data item stats - attachment 13



11.10 Test + & test - cables disconnected at the outputs of the BNC PB-5 and EG&G Ortec 534


      slow comparator 0xf                      p+n rates dominated by 'hot' channels *except* aida03 & aida09
      per FEE64 rate spectra - attachment 14
      ADC data item stats - attachment 15

      slow comparator 0xa                      p+n rates high ( 100-200k )
      per FEE64 rate spectra - attachment 16
      ADC data item stats - attachment 17


      slow comparator 0x14                      p+n rates entirely due to 'hot' channels
      per FEE64 rate spectra - attachment 18
      per FEE64 1.8.W spectra 20us FSR - attachments 19-20
      ADC data item stats - attachment 21


11.27 Remove ground cable from Al base plate to aida02 FEE64 adaptor PCB

      slow comparator 0xf                      p+n rates entirely due to 'hot' channels
      per FEE64 1.8.W spectra 20us FSR - attachments 22-23
      per FEE64 rate spectra - attachment 25
      ADC data item stats - attachment 24


      slow comparator 0xa                      p+n rates high ( 30-130k ) but lower than previously
      per FEE64 rate spectra - attachment 26
      ADC data item stats - attachment 27

11.48 DSSSD bias +100V leakage current +7.845uA

      Remove LK3 ( local HV ground middle Si wafer )

      slow comparator 0xa                      p+n rates high ( 55-135k ) but increase in rates appears to be due to 'hot' channels
      per FEE64 1.8.W spectra 20us FSR - attachments 28-30
      per FEE64 rate spectra - attachment 31
      ADC data item stats - attachment 32



      CAEN N1419ET ch #2 output connected to Tek TDS 210 DSO - powered from relay #6

      ch 1 - ac - HV braid
      ch 2 - ac - HV core

      ch # 2 OFF - attachment 33
      ch # 2 + 50V 0.000uA - attachments 34-35

      with additional ThorLabs filter
      ch # 2 + 50V 0.000uA - attachment 39


      ch 2 - dc, hi Z

      test -    attachments 36-37
      test +    attachment 38

12.45 Install ThorLabs filter HV core ( *no* filter for HV braid )

      slow comparator 0xa             p+n rates high ( 40-130k ) but p+n rates dominated by 'hot' channels *except* aida03, aida11, aida12 where rates are generally higher per strip
      per FEE64 rate spectra - attachment 40
      per FEE64 1.8.W spectra 20us FSR - attachments 41-42
      ADC data item stats - attachment 43
      


14.55 Install ThorLabs filter HV braid ( filters for both HV core & braid )

      slow comparator 0xa            p+n rates high ( 50-150k ) two filters probably somewhat worse than one filter
      per FEE64 rate spectra - attachment 46
      per FEE64 1.8.W spectra 20us FSR - attachments 44-45
      ADC data item stats - attachment 47


      Overall, effect of ThorLabs filters appears to belimited. Perhaps not unexpected as FEE64 adaptor PCBs also have a HV RC filter. 


      

15.16 DSSSD bias +100V leakage current +8.415uA

      ThorLabs filters removed
      Test + & test - signals disconnected at outputs of BNC PB-5 and EG&G Ortec 534

      aida02 & aida04 LK1 installed, aida01 LK3 not installed
      aida03 LK3 installed

      test + & test- daisy chains installed

      HV daisy chain - core -  aida12, aida03, aida11
      HV daisy chain - braid - aida04


      slow comparator 0xa     p+n FEE64 rates high ( 50-125k ) 

      per FEE64 rates - attachment 1
      per FEE64 1.8.W spectra 200us FSR - attachments 2-3
      adc data item stats - attachment 4


      slow comparator 0xc    p+n FEE64 rates OK ( 15-40k ) dominated by 'hot' channels, low per channel rates in aida11, aida03, aida12

      per FEE64 rates - attachment 5-6
      adc data item stats - attachment 7


      slow comparator 0xf    p+n FEE64 rates low ( 7-17k ) entirely dominated by 'hot' channels

      per FEE64 rates - attachment 8
      adc data item stats - attachment 9


      slow comparator 0x14    

      per FEE64 rates - attachment 10-11
      adc data item stats - attachment 12


      slow comparator 0x19    

      per FEE64 rates - attachment 13
      adc data item stats - attachment 14


      slow comparator 0x1e    

      per FEE64 rates - attachment 15
      adc data item stats - attachment 16

      slow comparator 0x23    

      per FEE64 rates - attachment 17
      adc data item stats - attachment 18


     slow comparator 0x28    

      per FEE64 rates - attachment 19-20
      adc data item stats - aattachment 21


      Ignoring 'hot' channels, reduce rates to < 50Hz/channel for p+n slow comparator threshold 120-150keV and n+n slow comparator threshold 350-400keV 
      If we assume that this estimates the 5x sigma threshold => p+n sigma c. 27keV rms, 64keV FWHM and n+n sigma c. 75keV rms, 176keV FWHM

      Given FEE64-DSSSD cable lengths, optimal p+n performance is c. 40-50keV FWHM so current tests begin to approach this - little extrinsic noise observed for preamp signals
      We continue to observe significant ( though very much improved ) extrinsic noise for n+n strips so current noise performance could be improved by x2-3.



18.42 slow comparator 0x64
      stats & histograms zero'd

      DSSSD bias +100V leakage current +9.040uA

10.20 DAQ found stalled

      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      AIDA SYNC stats - see attachment 4 - stats 10.1M/381/3600 => DAQ stalled at 23.05 + 7.4h => c.06.29
      System wide checks OK *except* SYNC pulses & SYNC errors - see attachments 5-8

      Conclude DAQ stalling at c. 06.30/18.30 due to start of ORNL LN2 dewar refill cycle
      but unrelated to either the BRIKEN-supplied 50MHz TTL clock signal to external clock
      input of Master MACB or the ground connection provided by this coaxial cable.

      Which implies the problem is either EMI/RFI or ac mains electrical ground. 

      AIDA powered by two single phase outlets from one of four sections of a single phase ac mains distribution
      box with power supplied by two heavy duty (3cm dia) cables from Denkenseiki Noisecut AVR type PMN (AVR4, B3F
      104V/51A). AIDA is connected to both NEMA 5-15R-style outlets of section A, LN2 refill to section D, BRIKEN
      to sections B, C and D.

      Ambient temperature +24.8 deg C, d.p. +4.1 deg C, RH 26.3%

15.00 DSSSD cabling drain wire attachment to AIDA adaptor PCB (FEE64 # 5 & 6) not tightly secured.
      CG re-secured drain wire and this has significantly reduced 100kHz period transient noise
      as observed at preamplifier outputs.

14.48 Restart DAQ (R110)
      Master MACB mode 5, 50MHz TTL clock to external clock input

14.57 DAQ stalled

      All system wide checks OK *except* SYNC errors - see attachment 9
      ASIC clock timestamp - nnaida19 fails 
      N.B. SYNC pulses check OK, counters incrementing between successive tests
      The latter is a problem we have seen previously but has not stopped DAQ running OK

aidas1> ./analyser /TapeData/Sept2016/R110_2
 *** TDR format 3.3.0 analyser - TD - October 2016
 *** ERROR: READ I/O error:       5002
                   blocks:      11861
          ADC data format:   82556471 (  877427.0 Hz)
        Other data format:   14217428 (  151105.7 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         27 (       0.3 Hz)
                               RESUME:         27 (       0.3 Hz)
                              SYNC100:     861083 (    9151.8 Hz)
                           FEE64 disc:   13353468 (  141923.4 Hz)
                             MBS info:       2823 (      30.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:       1976 (      21.0 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:       94.089 s
 FEE  elapsed dead time(s) elapsed idle time(s)
  1                0.084                0.000
  2                0.076                0.000
  3                0.000                0.000
  4                0.000                0.000
  5                0.109                0.000
  6                0.012                0.000
  7                0.000                0.000
  8                0.000                0.000
  9                0.003                0.000
 10                0.000                0.000
 11                0.000                0.000
 12                0.000                0.000
 13                0.000                0.000
 14                0.000                0.000
 15                0.032                0.000
 16                0.013                0.000
 17                0.000                0.000
 18                0.000                0.000
 19                0.125                0.000
 20                0.000                0.000
 21                0.000                0.000
 22                0.000                0.000
 23                0.142                0.149
 24                0.076                0.000
 25                0.000                0.000
 26                0.000                0.000
 27                0.000                0.000
 28                0.000                0.000
 29                0.000                0.000
 30                0.000                0.000
 31                0.000                0.000
 32                0.000                0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS      Other  
HEC Data
  0          0          0          0          0          0          0          0          0          0          0  
       0
  1     942953    5806860          0          0          3          3      35855    5770999          0          0  
      42
  2    4036003    4268394          0          0          2          2      35861    4232529          0          0  
       0
  3    3038422      39132          0          0          0          0      35892       3240          0          0  
       0
  4    1192440      42063          0          0          0          0      35889       6174          0          0  
      68
  5    5685966      39310          0          0          5          5      35849       3451          0          0  
       0
  6    3670394      46605          0          0          2          2      35885       7893       2823          0  
      70
  7    2661022      43508          0          0          0          0      35890       7618          0          0  
     231
  8    2165335      41382          0          0          0          0      35890       5492          0          0  
     359
  9    3037520     863964          0          0          1          1      35889     828073          0          0  
       0
 10    2616647     179334          0          0          0          0      35889     143445          0          0  
       0
 11    1083633      39064          0          0          0          0      35889       3175          0          0  
       0
 12    1759629      38368          0          0          0          0      35888       2480          0          0  
       0
 13    2419715     280498          0          0          0          0      35891     244607          0          0  
       0
 14    3189205    1325559          0          0          0          0      35887    1289672          0          0  
     747
 15    4886680      39482          0          0          2          2      35871       3607          0          0  
       7
 16    5087977      38869          0          0          1          1      35886       2981          0          0  
       0
 17    2905638     329411          0          0          0          0      35888     293523          0          0  
       0
 18    3327386      46016          0          0          0          0      35888      10128          0          0  
       0
 19    6770177      40711          0          0          4          4      35842       4861          0          0  
       7
 20    2225755      38524          0          0          0          0      35891       2633          0          0  
     344
 21    2061728      40299          0          0          0          0      35887       4412          0          0  
      90
 22    3052329     512109          0          0          0          0      35890     476219          0          0  
       7
 23    9325689      38673          0          0          3          3      35834       2833          0          0  
       3
 24    5414228      39293          0          0          4          4      35862       3423          0          0  
       1
 25          0          0          0          0          0          0          0          0          0          0  
       0
 26          0          0          0          0          0          0          0          0          0          0  
       0
 27          0          0          0          0          0          0          0          0          0          0  
       0
 28          0          0          0          0          0          0          0          0          0          0  
       0
 29          0          0          0          0          0          0          0          0          0          0  
       0
 30          0          0          0          0          0          0          0          0          0          0  
       0
 31          0          0          0          0          0          0          0          0          0          0  
       0
 32          0          0          0          0          0          0          0          0          0          0  
       0

 *** Timewarps
 FEE       ADC      Pause     Resume    SYNC100       Disc        MBS  Undefined    Samples
  0          0          0          0          0          0          0          0          0
  1          0          0          0          0          0          0          0          0
  2          0          0          0          0          0          0          0          0
  3          0          0          0          0          0          0          0          0
  4          0          0          0          0          0          0          0          0
  5          0          0          0          0          0          0          0          0
  6          0          0          0          0          0          0          0          0
  7          0          0          0          0          0          0          0          0
  8          0          0          0          0          0          0          0          0
  9          0          0          0          0          0          0          0          0
 10          0          0          0          0          0          0          0          0
 11          0          0          0          0          0          0          0          0
 12          0          0          0          0          0          0          0          0
 13          0          0          0          0          0          0          0          0
 14          0          0          0          0          0          0          0          0
 15          0          0          0          0          0          0          0          0
 16          0          0          0          0          0          0          0          0
 17          0          0          0          0          0          0          0          0
 18          0          0          0          0          0          0          0          0
 19          0          0          0          0          0          0          0          0
 20          0          0          0          0          0          0          0          0
 21          0          0          0          0          0          0          0          0
 22          0          0          0          0          0          0          0          0
 23          0          0          0          0          0          0          0          0
 24          0          0          0          0          0          0          0          0
 25          0          0          0          0          0          0          0          0
 26          0          0          0          0          0          0          0          0
 27          0          0          0          0          0          0          0          0
 28          0          0          0          0          0          0          0          0
 29          0          0          0          0          0          0          0          0
 30          0          0          0          0          0          0          0          0
 31          0          0          0          0          0          0          0          0
 32          0          0          0          0          0          0          0          0

 *** Program elapsed time:    1.500s ( 7907.333 blocks/s, 494.208 Mb/s)

15.48 Restart aidas1
      Power cycle FEE64s

      Restart AIDA DAQ

      Same problem - DAQ stall (no output from merger) at, or shortly after, Start ASIC Readout with
      multiple FEE64s with zero AIDA SYNC rate
      *All* system wide checks OK

      Cannot recover DAQ control of FEE64s with merger restart - power cycle FEE64s again


23.58 Attempt to change master MACB from MACB module #11 mode 5 to MACB module #13 mode 0

      Successive fuse failures of USB ac mains relay

      System wide ASIC clock timestamp check nnaida 5/6/7/8 13/14/15/16 21/22/23/24 i.e. first half of MACB tree

      Re-seat HDMI cabling from  master MACB root module to first half of MACB tree - ReSYNC fails - see attachments
10 & 11

   

Overnight
      Degrader OUT
      DAQ ran OK - data file R22
      DSSSD #3 (N1419 ch #2) tripped, re-enabled OK 

      Attachments 1-15 from R22
      nnaida10 DSSSD #1 ASIC #1-4 HEC ADC spectra + hit patterns
      nnaida2 DSSSD #1 ASIC #1-4 HEC ADC spectra + hit patterns
      nnaida1 DSSSD #1 ASIC #1-4 HEC ADC spectra + hit patterns
      HEC fast comparator LLD 0x8 - standard ASIC parameters

09.06 Beam off

09.36 Beam on

09.46 R23
      HEC fast comparator LLD 0x8 -> 0x2

c. 10.00 beam lost, cyclotron re-tuning

10.56 R23 stopped

11.20 FEE64 firmware update - /MIDAS/Aida/FEE_Riken_Apr14_26.bin
      See attachment 16

11.58 R24
14.35 R24 stopped

      R25 diode link threshold nnaida1 0xca -> 0xba, nnaida3 0x11 -> 0x18
14.52 R25 stopped

      R26 diode link threshold nnaida1 -> 0xbc, nnaida3 -> 0x1c
15.06 R26 stopped

15.00 Beam off

15.25 BigRIPS changed to 110Zr setting. Tuning.

17.05 Beam on

Ignore R27_0

17.06 R28
17.49 R28 stopped

Ignore R29, R30

22.56 diode link threshold 0xca -> 0xb6 (cf. preAmp ref 0xb2)
                           0x11 -> 0x2c (cf. preAmp ref 0x30)

      ASIC parameters saved to      /MIDAS/DB/EXPERIMENTS/AIDA/2015Apr30-diode-mod

23.18 Fast LEC/MEC discriminators disabled:
      Mask bits 31->0, 63->32 *not* 0->31 and 32->63 as implied by Disc Controls window

         Chan                 Mask
                             31->0      63->32
nnaida1                        0x0   0x4000000
nnaida2  ch 22, 26       0x4400001   0x8000000
nnaida6  ch  1                 0x1         0x0
nnaida9  ch 45 "               0x0      0x2000
nnaida10 ch 31 "        0x82000000  0x80000000
nnaida11 ch 55 "               0x0    0x800000
nnaida13                       0x0   0x4000000
nnaida16 ch 55 "               0x0    0x800000

00.04 Local Controls -> Timing O/P Control Register 0xc -> 0xe (OR64) https://elog.ph.ed.ac.uk/AIDA/79