| ID |
Date |
Author |
Subject |
Text |
 |
|
399
|
Sun Oct 28 07:41:03 2018 |
AT, JA, AA | Background | Dacq was reinitialized
Background was measurement
Pulser: YES
|
|
|
398
|
Fri Oct 26 15:15:55 2018 |
JA, ATS, ATD, JLT, AA | Background measurements |
No pulser (inhibit in clock)
DLT: 181026_2244_Bkg_NoPulser_114.dlt
|
|
|
397
|
Fri Oct 26 03:57:37 2018 |
ATS & JLT | Background | Background BRIKEN control measurement
No DLT
|
|
|
396
|
Fri Oct 26 03:31:33 2018 |
AT2 & JA | Test pulser effect on baseline | We have tested possible change of the baseline
in the digitizer due to the pulser connection.
NO EFFECT has been
|
6x |
|
395
|
Fri Oct 26 03:24:25 2018 |
ATS & JLT | Background | Background BRIKEN control measurement
No DLT
|
|
|
394
|
Thu Oct 25 16:08:53 2018 |
ATS & JLT | Lead bricks | Lead bricks in BRIKEN hole to protect AIDA |
|
|
393
|
Thu Oct 25 16:04:17 2018 |
ATS & JLT | Background | Background BRIKEN control measurement
No DLT
|
|
|
392
|
Thu Oct 25 09:32:25 2018 |
AT & AT | Low threshold, 252Cf, z=25cm, Perpendicular 90deg | 252Cf at z=25cm,ie 25 cm upstream the beam,
source axis perpendicular at 90deg with respect
to typical
|
|
|
391
|
Thu Oct 25 09:18:24 2018 |
ATS & JLT | F11 plastic | F11 plastic (long plastic after MUSIC chamber)
connected to DACQ.
|
|
|
390
|
Thu Oct 25 09:07:00 2018 |
ATS & JLT | BRIKEN Calibration check | We put the 252Cf source and check the aligment
of 3He tubes gains:
|
|
|
389
|
Thu Oct 25 04:14:00 2018 |
AT & AT | Low threshold, 252Cf, z=25cm, Perpendicular 90deg | 252Cf at z=25cm,ie 25 cm upstream the beam,
source axis perpendicular at 90deg with respect
to typical
|
|
|
388
|
Thu Oct 25 00:53:43 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm, Perpendicular 90deg | 252Cf at z=-25cm,ie 25 cm downstream the beam,
source axis perpendicular at 90deg with respect
to typical
|
|
|
387
|
Wed Oct 24 16:11:32 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm | 252Cf at z=-25cm,ie 25 cm downstream the beam,
source axis parallel.
Low threshold.
|
|
|
386
|
Wed Oct 24 11:28:42 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm | 252Cf at z=-25cm,ie 25 cm downstream, source
axis perpendicular, typical orientation.
Low threshold.
|
|
|
385
|
Wed Oct 24 11:27:51 2018 |
AT & AT | Low threshold, 252Cf, z=10cm, source axis parallel | 252Cf at z=10cm, source axis parallel upstream
to the beam.
Low threshold.
|
|
|
384
|
Wed Oct 24 07:42:42 2018 |
AT & AT | Low threshold, 252Cf, z=10cm, source axis parallel | 252Cf at z=10cm, source axis parallel upstream
to the beam.
Low threshold.
|
|
|
383
|
Wed Oct 24 03:49:01 2018 |
AT & AT | Low threshold, 252Cf, z=0cm | 252Cf at z=10cm, source axis perpendicular
to beam axis, typical orientation.
Low threshold.
|
|
|
382
|
Mon Oct 22 16:54:10 2018 |
AT & AT | background, low threshold, No Pulser | 18/10/23 START: 00:53
18/10/24 STOP: 10:12
Background measurements. Checking noise!
|
|
|
381
|
Mon Oct 22 11:42:50 2018 |
AT & AT | 252Cf, z=25cm, no clovers | 252Cf source placed using cardboard piece
at z=25cm, source axis parallel upstream
to the beam axis.
|
|
|
380
|
Mon Oct 22 08:15:52 2018 |
AT & AT | 252Cf, z=15cm, no clovers | 252Cf source placed using cardboard piece
at z=15cm, source axis parallel to the beam
axis.
|
|