AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

CARME, Page 27 of 34

New |  Find |  Select |  Import |  Config |  Last day |  Help

Full | Summary | Threaded     -- All entries -- Last day Last 3 Days Last week Last month Last 3 Months Last 6 Months Last Year  663 Entries

Goto page Previous  1, 2, 3 ... 26, 27, 28 ... 32, 33, 34   Next

ID Date Author Subject Text   143   Fri Nov 5 12:27:11 2021 CB RSS + DR NP ML US First pump down of YR09 Tightened all flanges. Added Pirani gauge and third IE514 to interaction chamber.      142   Wed Nov 3 16:39:01 2021 CB RSS + NP DR NK ML Interaction chamber lifted in place Prepared to move interaction chamber in place. Ok CARME side, flange has M10 bolts. On interaction chamber side i.e. bellows      141   Wed Nov 3 11:18:11 2021 CB RSS + DR NK ML Leak closed Found CARME at 1.0E-6 mbar. Beginning leak test.        140   Tue Nov 2 12:45:36 2021 CB + DR NK Issues with CARME feet Attempted to close CARME as carefully as possible. Swapped out one foot for another      139   Mon Nov 1 14:48:16 2021 CB + ML DR CARME opened Confirmed leak as per previous Elog. Tightened to 100 Nm - no effects. Tightened to 130 Nm - bottom leak      138   Sun Oct 31 13:55:13 2021 CB OH Leak tests Found CARME at 2E-7. Closed valve on top of roughing pump. Clamp was not tight. Pressure still      137   Sun Oct 31 08:05:15 2021 CB OH + DR ML CARME closed again + feedthroughs labeled (Fri 29 October) Cleaned wire seal recess and labeled thermocouples and flanges to identify p-n  11x    136   Sun Oct 31 07:55:39 2021 CB JM + OH Strain relief mounted (Thu 28 October) All strain relief extension plates mounted behind the wires, using SS countersunk      135   Sun Oct 31 07:41:20 2021 CB JM + RSS Wires plugged in DSSDs (Wed 27 October) Started with top-most flange. Attemptedto plug in MACOR lead in DSSD plug in preparation  8x    134   Sun Oct 31 07:29:17 2021 CB JM + RSS OG Detectors mounted on plate in CARME (Wed 27 October) Dismounted plate from rod. Dismounted broken detectors from plate and placed back  8x    133   Sun Oct 31 07:21:09 2021 CB JM RSS Detectors arrived in GSI (Tue 26 October) Two new CARME DSSD arrived in GSI and collected. Visually inspected both sides.  6x    132   Fri Oct 29 15:09:27 2021 CB JM + RSS OG DR Preparation to mount new DSSDs (Mon 25 October - Tue 26 October) Considered different strategies to mount DSSDs inside CARME, while waiting  6x    131   Sat Oct 23 12:58:11 2021 JM GSI vacuum and bakeout testing summary Attachment 1 shows the pump-down of the CARME chamber at GSI before installation of kapton cabling inside the chamber and      130   Fri Oct 22 13:22:48 2021 TD CARME FEE64 adaptor PCB    10x    129   Fri Oct 22 13:11:26 2021 TD MSL type TTT14 assembly drawings & pin assignments        128   Thu Oct 21 20:26:44 2021 JM TD Thermocouple and Connector cables NEG pump electrical connections tested - all connections sound.  Detector carriers have been redrilled  10x    127   Mon Oct 18 16:25:11 2021 JM RSS TD NEG rotation + cable removals Kapton cabling and the broken ceramic detector holder have been separated. Required holding jacking plate in a vice and using lots of      126   Sun Oct 17 11:48:48 2021 TD RSS Sunday 17 October Looking downstream the RHS motor assembly has  loose green/yellow (gnd?) see attachment 1  14x    125   Sat Oct 16 17:25:47 2021 RSS TD Broken detectors One of the detectors was damaged while mounting (see pictures 1-3). Second detector was found already      124   Fri Oct 15 19:37:12 2021 RSS TD + DR Friday 15 October Ring seal is out. See picture 1. Bellow (towards CARME) was installed in the gas jet chamber. Attached are some  8x

Goto page Previous  1, 2, 3 ... 26, 27, 28 ... 32, 33, 34   Next

ELOG V3.1.4-unknown