 Sun Apr 7 12:02:23 2024, TD, Sunday 7 April 46x
|
13.00 Cooling water temperature and flow OK - attachment 1
Test of AIDA 2x MSL type BB18(DS)-1000 24cm x 8cm DSSSDs 'as is' ( to be defined later in this Elog )
DSSSD bias & leakage current OK - attachment 2
Ambient temp 24.7 deg C, d.p. 7.1 deg C, RH 32.4%
Leakage current c. 6.6uA => 4nA/cm2/100um ( very good )
FEE64 temps OK - attachment 3
*except* aida02 ASIC temp which is known to be u/s
All system wide checks OK *except* aida02 and aida04 WR decoder status - attachment 4
WR timestamps OK - attachment 5
WR (info code 4 & 5), correlation scaler, PAUSE, RESUME, DISC, ADC data item stats - attachments 6-12
per FEE64 Rate spectra - attachments 13-15
per 1.8.W spectra - 20us FSR - attachments 16-1710129
14.45 FEE64 config check - per https://elog.ph.ed.ac.uk/DESPEC/562
FEE64 # PSU cable # MAC
1 1 ?
2 2 ?
3 3 ?
4 4 41 ee 71
5 5 ?
6 6 ?
7 7 f6 5a
8 8 41 d7 cd
9 ? ?
10 10 41 d0 0e
11 11 41 ee 0f
12 ? ?
13 13 ?
14 ? 0d 15
15 15 ?
16 16 f6 ed
? = no line of sight
- AIDA FEE64 PSU cabling - see attachment 18
Currently
PSU #1 1-3, 2-4, 9-5, 15-12
PSU #2 14-7, 6-8, 10-13, 11-16
Should be changed to
PSU #1 1-3, 2-4, 9-15, 5-12
PSU #2 14-7, 6-8, 10-11, 13-16
- AIDA snout mount to support frame - attachments 19 & 21
LHS ( looking downstream ) incorrect, RHS OK
- LKs
LK1 fitted aida02, aida04, aida06, aida08
LK3 fitted aida03, aida07, aida01, aida14
Significant gaps in snout ( i.e. possible light leaks ) where bPlas cabling exits snout - attachments 20 & 22
bPlas driver PCBs removed
bPlas ribbon cables, drain wires and Lemo 00.250 cabling disconnected - some cabling/drain wires touching snout etc
15.15 Adjust bPlas ribbon cables/drain wires/Lemo cables to ensure that none are touching snout or AIDA support frame - significant improvement
DSSSD bias & leakage current OK - attachment 23
FEE64 temps OK - attachment 24
ADC data item stats - attachments 25
per FEE64 Rate spectra - attachments 26
6x FEE64s < 20k. all FEE64s < 120k ( cf. 4x FEE64s < 20k, 5x FEE64s > 100k, 1x FEE64 320k earlier - attachment 12 )
per 1.8.W spectra - 20us FSR - attachments 27-28
17.15
LHS top hat washers
LK1, LK3
PSU power cables
tighten gnd screws
attachments 29-34
Note that some of the newly installed FEE64s have the incorrect rails fitted - FEE64s may ground to AIDA support stand
17.55 CAEN N1419ET LK removed -> floating outputs
18.15 +LK1 restored
attachments 35-40
18.40 +pwwer cycle
attachments 41-46 |
|
Sun Apr 7 12:16:27 2024, TD, aida06 system console log
|
ISOL Version 1.00 Date 9th January 2017
Flash base address=FC000000
Set Flash to ASync Mode
XST_SUCCESS:07:47|
Finished copying zImage to RAM
07:04:24/13:07:48|
Found 0 errors checking kernel image
07:04:24/13:07:49|VHDL version number 0X03350706
Based on AIDA Bootloader version number 1.2.0 -- 16th August 2012
Starting LMK 3200 setup
07:04:24/13:07:49|
Setting LMK03200 to standard clock settings -- External Clock 23Nov15
.... SPI Base Address=0x81400000
clk_control_reg=0x4
07:04:24/13:07:49|Next step is SPIconfig
Control 32(0x81400000)=0x180
SlaveSel(0x81400000)=0x3
Ctrl(0x81400000)=0xE6
Ctrl(0x81400000)=0x86
07:04:24/13:07:49|SPIconfig done now to set up the LMK3200 registers
07:04:24/13:07:49|LMK #0 : regInit[0]=0x80000000
07:04:24/13:07:49|LMK #0 : regInit[1]=0x10070600
07:04:24/13:07:49|LMK #0 : regInit[2]=0x60601
07:04:24/13:07:50|LMK #0 : regInit[3]=0x60602
07:04:24/13:07:50|LMK #0 : regInit[4]=0x60603
07:04:24/13:07:50|LMK #0 : regInit[5]=0x70624
07:04:24/13:07:50|LMK #0 : regInit[6]=0x70605
07:04:24/13:07:50|LMK #0 : regInit[7]=0x70606
07:04:24/13:07:50|LMK #0 : regInit[8]=0x70627
07:04:24/13:07:50|LMK #0 : regInit[9]=0x10000908
07:04:24/13:07:50|LMK #0 : regInit[10]=0xA0022A09
07:04:24/13:07:50|LMK #0 : regInit[11]=0x82800B
07:04:24/13:07:50|LMK #0 : regInit[12]=0x28C800D
07:04:24/13:07:50|LMK #0 : regInit[13]=0x830020E
07:04:24/13:07:50|LMK #0 : regInit[14]=0xC800180F
Calibrate completed at 943 counts
Setting Clock Control =0x0000000B, to set GOE and sync bit
Ctrl @ SPIstop (0x81400000)=0x186
Timeout waiting for Lock detect Stage 2 (Zero Delay), PWR_DWN=0x00000004
07:04:24/13:07:50|
Finished Clock setup LMK03200
completed LMK 3200 setup
Loaded all four ASICs with default settings
Setting the ADCs into calibration mode
07:04:24/13:07:50|
Control 32(0x81400400)=0x180
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86
Init : Config of AD9252 SPI ok
07:04:24/13:07:50|
Ctrl @ SPIstop (0x81400400)=0x186ADCs initialised
Cal not completed
ADC calibrate failed
Jumping to kernel simpleboot...
07:04:24/13:07:51|
zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0)
Allocating 0x3b78cc bytes for kernel ...
gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes
07:04:24/13:07:54|
Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Finalizing device tree... flat tree at 0xbd1300
Probing IIC bus for MAC... MAC address = 0xd8 0x80 0x39 0x41 0xee 0x71
07:04:24/13:08:00|Using Xilinx Virtex440 machine description
07:04:24/13:08:01|Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011
07:04:24/13:08:01|Zone PFN ranges:
07:04:24/13:08:01| DMA 0x00000000 -> 0x00007000
07:04:24/13:08:01| Normal 0x00007000 -> 0x00007000
07:04:24/13:08:01|Movable zone start PFN for each node
07:04:24/13:08:01|early_node_map[1] active PFN ranges
07:04:24/13:08:01| 0: 0x00000000 -> 0x00007000
07:04:24/13:08:01|MMU: Allocated 1088 bytes of context maps for 255 contexts
07:04:24/13:08:01|Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448
07:04:24/13:08:02|Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
07:04:24/13:08:02|PID hash table entries: 512 (order: 9, 2048 bytes)
07:04:24/13:08:02|Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
07:04:24/13:08:02|Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
07:04:24/13:08:02|Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init)
07:04:24/13:08:02|Kernel virtual memory layout:
07:04:24/13:08:02| * 0xffffe000..0xfffff000 : fixmap
07:04:24/13:08:02| * 0xfde00000..0xfe000000 : consistent mem
07:04:24/13:08:02| * 0xfde00000..0xfde00000 : early ioremap
07:04:24/13:08:02| * 0xd1000000..0xfde00000 : vmalloc & ioremap
07:04:24/13:08:02|NR_IRQS:512
07:04:24/13:08:02|clocksource: timebase mult[a00000] shift[22] registered
07:04:24/13:08:02|Console: colour dummy device 80x25
07:04:24/13:08:02|Mount-cache hash table entries: 512
07:04:24/13:08:02|NET: Registered protocol family 16
07:04:24/13:08:02|PCI: Probing PCI hardware
07:04:24/13:08:02|bio: create slab <bio-0> at 0
07:04:24/13:08:02|NET: Registered protocol family 2
07:04:24/13:08:02|IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
07:04:24/13:08:02|TCP established hash table entries: 4096 (order: 3, 32768 bytes)
07:04:24/13:08:03|TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
07:04:24/13:08:03|TCP: Hash tables configured (established 4096 bind 4096)
07:04:24/13:08:03|TCP reno registered
07:04:24/13:08:03|NET: Registered protocol family 1
07:04:24/13:08:03|ROMFS MTD (C) 2007 Red Hat, Inc.
07:04:24/13:08:03|msgmni has been set to 214
07:04:24/13:08:03|io scheduler noop registered
07:04:24/13:08:03|io scheduler anticipatory registered
07:04:24/13:08:03|io scheduler deadline registered
07:04:24/13:08:03|io scheduler cfq registered (default)
07:04:24/13:08:03|Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
07:04:24/13:08:03|83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
07:04:24/13:08:03|console [ttyS0] enabled
07:04:24/13:08:03|brd: module loaded
07:04:24/13:08:03|loop: module loaded
07:04:24/13:08:03|Device Tree Probing 'ethernet'
07:04:24/13:08:03|xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:ee:71
07:04:24/13:08:03|xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
07:04:24/13:08:03|XLlTemac: DCR address: 0x80
07:04:24/13:08:03|XLlTemac: buffer descriptor size: 32768 (0x8000)
07:04:24/13:08:03|XLlTemac: Allocating DMA descriptors with kmalloc
07:04:24/13:08:03|XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
07:04:24/13:08:04|XTemac: PHY detected at address 7.
07:04:24/13:08:04|xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17
07:04:24/13:08:04|fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
07:04:24/13:08:04| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:08:04| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:08:04| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:08:04| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:08:04| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:08:04| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:08:04|Using buffer write method
07:04:24/13:08:04|cfi_cmdset_0001: Erase suspend on write enabled
07:04:24/13:08:04|cmdlinepart partition parsing not available
07:04:24/13:08:04|RedBoot partition parsing not available
07:04:24/13:08:04|Creating 5 MTD partitions on "fc000000.flash":
07:04:24/13:08:04|0x000000000000-0x000000500000 : "golden_firmware"
07:04:24/13:08:04|0x000000500000-0x000000800000 : "golden_kernel"
07:04:24/13:08:04|0x000000800000-0x000000d00000 : "user_firmware"
07:04:24/13:08:04|0x000000d00000-0x000000fe0000 : "user_kernel"
07:04:24/13:08:04|0x000000fe0000-0x000001000000 : "env_variables"
07:04:24/13:08:05|xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
07:04:24/13:08:05|SPI: XIlinx spi: bus number now 32766
07:04:24/13:08:05|xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
07:04:24/13:08:05|SPI: XIlinx spi: bus number now 32765
07:04:24/13:08:05|mice: PS/2 mouse device common for all mice
07:04:24/13:08:05|Device Tree Probing 'i2c'
07:04:24/13:08:05| #0 at 0x81600000 mapped to 0xD1030000, irq=22
07:04:24/13:08:05|at24 0-0050: 1024 byte 24c08 EEPROM (writable)
07:04:24/13:08:05|TCP cubic registered
07:04:24/13:08:05|NET: Registered protocol family 17
07:04:24/13:08:05|RPC: Registered udp transport module.
07:04:24/13:08:05|RPC: Registered tcp transport module.
07:04:24/13:08:05|eth0: XLlTemac: Options: 0x3fa
07:04:24/13:08:06|eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
07:04:24/13:08:06|eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
07:04:24/13:08:06|eth0: XLlTemac: speed set to 1000Mb/s
07:04:24/13:08:08|eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
07:04:24/13:08:08|eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
07:04:24/13:08:08|Sending DHCP requests .
07:04:24/13:08:10|eth0: XLlTemac: PHY Link carrier lost.
07:04:24/13:08:10|..... timed out!
07:04:24/13:09:39|IP-Config: Reopening network devices...
07:04:24/13:09:39|eth0: XLlTemac: Options: 0x3fa
07:04:24/13:09:40|eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
07:04:24/13:09:40|eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
07:04:24/13:09:40|eth0: XLlTemac: speed set to 1000Mb/s
07:04:24/13:09:42|eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
07:04:24/13:09:42|eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
07:04:24/13:09:42|Sending DHCP requests ...... timed out!
07:04:24/13:11:15|IP-Config: Auto-configuration of network failed.
07:04:24/13:11:15|Root-NFS: No NFS server available, giving up.
07:04:24/13:11:15|VFS: Unable to mount root fs via NFS, trying floppy.
07:04:24/13:11:15|VFS: Cannot open root device "nfs" or unknown-block(2,0)
07:04:24/13:11:15|Please append a correct "root=" boot option; here are the available partitions:
07:04:24/13:11:15|Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
07:04:24/13:11:15|Call Trace:
07:04:24/13:11:15|[c6827ed0] [c0005de8] show_stack+0x44/0x16c (unreliable)
07:04:24/13:11:15|[c6827f10] [c00345bc] panic+0x94/0x168
07:04:24/13:11:15|[c6827f60] [c0341d34] mount_block_root+0x12c/0x244
07:04:24/13:11:15|[c6827fb0] [c03420d8] prepare_namespace+0x17c/0x208
07:04:24/13:11:15|[c6827fd0] [c0341220] kernel_init+0x104/0x130
07:04:24/13:11:15|[c6827ff0] [c000e140] kernel_thread+0x4c/0x68
07:04:24/13:11:15|Rebooting in 180 seconds..
ISOL Version 1.00 Date 9th January 2017
Flash base address=FC000000
Set Flash to ASync Mode
XST_SUCCESS:14:15|
Finished copying zImage to RAM
07:04:24/13:14:16|
Found 0 errors checking kernel image
07:04:24/13:14:17|VHDL version number 0X03350706
Based on AIDA Bootloader version number 1.2.0 -- 16th August 2012
Starting LMK 3200 setup
07:04:24/13:14:17|
Setting LMK03200 to standard clock settings -- External Clock 23Nov15
.... SPI Base Address=0x81400000
clk_control_reg=0x4
07:04:24/13:14:17|Next step is SPIconfig
Control 32(0x81400000)=0x180
SlaveSel(0x81400000)=0x3
Ctrl(0x81400000)=0xE6
Ctrl(0x81400000)=0x86
07:04:24/13:14:17|SPIconfig done now to set up the LMK3200 registers
07:04:24/13:14:17|LMK #0 : regInit[0]=0x80000000
07:04:24/13:14:18|LMK #0 : regInit[1]=0x10070600
07:04:24/13:14:18|LMK #0 : regInit[2]=0x60601
07:04:24/13:14:18|LMK #0 : regInit[3]=0x60602
07:04:24/13:14:18|LMK #0 : regInit[4]=0x60603
07:04:24/13:14:18|LMK #0 : regInit[5]=0x70624
07:04:24/13:14:18|LMK #0 : regInit[6]=0x70605
07:04:24/13:14:18|LMK #0 : regInit[7]=0x70606
07:04:24/13:14:18|LMK #0 : regInit[8]=0x70627
07:04:24/13:14:18|LMK #0 : regInit[9]=0x10000908
07:04:24/13:14:18|LMK #0 : regInit[10]=0xA0022A09
07:04:24/13:14:18|LMK #0 : regInit[11]=0x82800B
07:04:24/13:14:18|LMK #0 : regInit[12]=0x28C800D
07:04:24/13:14:18|LMK #0 : regInit[13]=0x830020E
07:04:24/13:14:18|LMK #0 : regInit[14]=0xC800180F
Calibrate completed at 941 counts
Setting Clock Control =0x0000000B, to set GOE and sync bit
Ctrl @ SPIstop (0x81400000)=0x186
Timeout waiting for Lock detect Stage 2 (Zero Delay), PWR_DWN=0x00000004
07:04:24/13:14:18|
Finished Clock setup LMK03200
completed LMK 3200 setup
Loaded all four ASICs with default settings
Setting the ADCs into calibration mode
07:04:24/13:14:18|
Control 32(0x81400400)=0x180
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86
Init : Config of AD9252 SPI ok
07:04:24/13:14:19|
Ctrl @ SPIstop (0x81400400)=0x186ADCs initialised
Cal DCMs not locked
ADC calibrate failed
Jumping to kernel simpleboot...
07:04:24/13:14:19|
zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0)
Allocating 0x3b78cc bytes for kernel ...
gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes
07:04:24/13:14:22|
Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Finalizing device tree... flat tree at 0xbd1300
Probing IIC bus for MAC... MAC address = 0xd8 0x80 0x39 0x41 0xee 0x71
07:04:24/13:14:28|Using Xilinx Virtex440 machine description
07:04:24/13:14:29|Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011
07:04:24/13:14:29|Zone PFN ranges:
07:04:24/13:14:29| DMA 0x00000000 -> 0x00007000
07:04:24/13:14:29| Normal 0x00007000 -> 0x00007000
07:04:24/13:14:29|Movable zone start PFN for each node
07:04:24/13:14:29|early_node_map[1] active PFN ranges
07:04:24/13:14:29| 0: 0x00000000 -> 0x00007000
07:04:24/13:14:29|MMU: Allocated 1088 bytes of context maps for 255 contexts
07:04:24/13:14:29|Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448
07:04:24/13:14:29|Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
07:04:24/13:14:30|PID hash table entries: 512 (order: 9, 2048 bytes)
07:04:24/13:14:30|Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
07:04:24/13:14:30|Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
07:04:24/13:14:30|Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init)
07:04:24/13:14:30|Kernel virtual memory layout:
07:04:24/13:14:30| * 0xffffe000..0xfffff000 : fixmap
07:04:24/13:14:30| * 0xfde00000..0xfe000000 : consistent mem
07:04:24/13:14:30| * 0xfde00000..0xfde00000 : early ioremap
07:04:24/13:14:30| * 0xd1000000..0xfde00000 : vmalloc & ioremap
07:04:24/13:14:30|NR_IRQS:512
07:04:24/13:14:30|clocksource: timebase mult[a00000] shift[22] registered
07:04:24/13:14:30|Console: colour dummy device 80x25
07:04:24/13:14:30|Mount-cache hash table entries: 512
07:04:24/13:14:30|NET: Registered protocol family 16
07:04:24/13:14:30|PCI: Probing PCI hardware
07:04:24/13:14:30|bio: create slab <bio-0> at 0
07:04:24/13:14:30|NET: Registered protocol family 2
07:04:24/13:14:30|IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
07:04:24/13:14:30|TCP established hash table entries: 4096 (order: 3, 32768 bytes)
07:04:24/13:14:31|TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
07:04:24/13:14:31|TCP: Hash tables configured (established 4096 bind 4096)
07:04:24/13:14:31|TCP reno registered
07:04:24/13:14:31|NET: Registered protocol family 1
07:04:24/13:14:31|ROMFS MTD (C) 2007 Red Hat, Inc.
07:04:24/13:14:31|msgmni has been set to 214
07:04:24/13:14:31|io scheduler noop registered
07:04:24/13:14:31|io scheduler anticipatory registered
07:04:24/13:14:31|io scheduler deadline registered
07:04:24/13:14:31|io scheduler cfq registered (default)
07:04:24/13:14:31|Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
07:04:24/13:14:31|83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
07:04:24/13:14:31|console [ttyS0] enabled
07:04:24/13:14:31|brd: module loaded
07:04:24/13:14:31|loop: module loaded
07:04:24/13:14:31|Device Tree Probing 'ethernet'
07:04:24/13:14:31|xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:ee:71
07:04:24/13:14:31|xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
07:04:24/13:14:31|XLlTemac: DCR address: 0x80
07:04:24/13:14:31|XLlTemac: buffer descriptor size: 32768 (0x8000)
07:04:24/13:14:31|XLlTemac: Allocating DMA descriptors with kmalloc
07:04:24/13:14:31|XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
07:04:24/13:14:32|XTemac: PHY detected at address 7.
07:04:24/13:14:32|xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17
07:04:24/13:14:32|fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
07:04:24/13:14:32| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:14:32| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:14:32| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:14:32| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:14:32| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:14:32| Intel/Sharp Extended Query Table at 0x010A
07:04:24/13:14:32|Using buffer write method
07:04:24/13:14:32|cfi_cmdset_0001: Erase suspend on write enabled
07:04:24/13:14:32|cmdlinepart partition parsing not available
07:04:24/13:14:32|RedBoot partition parsing not available
07:04:24/13:14:32|Creating 5 MTD partitions on "fc000000.flash":
07:04:24/13:14:32|0x000000000000-0x000000500000 : "golden_firmware"
07:04:24/13:14:32|0x000000500000-0x000000800000 : "golden_kernel"
07:04:24/13:14:32|0x000000800000-0x000000d00000 : "user_firmware"
07:04:24/13:14:32|0x000000d00000-0x000000fe0000 : "user_kernel"
07:04:24/13:14:32|0x000000fe0000-0x000001000000 : "env_variables"
07:04:24/13:14:33|xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
07:04:24/13:14:33|SPI: XIlinx spi: bus number now 32766
07:04:24/13:14:33|xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
07:04:24/13:14:33|SPI: XIlinx spi: bus number now 32765
07:04:24/13:14:33|mice: PS/2 mouse device common for all mice
07:04:24/13:14:33|Device Tree Probing 'i2c'
07:04:24/13:14:33| #0 at 0x81600000 mapped to 0xD1030000, irq=22
07:04:24/13:14:33|at24 0-0050: 1024 byte 24c08 EEPROM (writable)
07:04:24/13:14:33|TCP cubic registered
07:04:24/13:14:33|NET: Registered protocol family 17
07:04:24/13:14:33|RPC: Registered udp transport module.
07:04:24/13:14:33|RPC: Registered tcp transport module.
07:04:24/13:14:33|eth0: XLlTemac: Options: 0x3fa
07:04:24/13:14:34|eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
07:04:24/13:14:34|eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
07:04:24/13:14:34|eth0: XLlTemac: speed set to 1000Mb/s
07:04:24/13:14:36|eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
07:04:24/13:14:36|eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
07:04:24/13:14:36|Sending DHCP requests ., OK
07:04:24/13:14:37|IP-Config: Got DHCP answer from 192.168.11.99, my address is 192.168.11.6
07:04:24/13:14:37|IP-Config: Complete:
07:04:24/13:14:37| device=eth0, addr=192.168.11.6, mask=255.255.255.0, gw=255.255.255.255,
07:04:24/13:14:37| host=aida06, domain=dl.ac.uk, nis-domain=nuclear.physics,
07:04:24/13:14:37| bootserver=192.168.11.99, rootserver=192.168.11.99, rootpath=/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida06
07:04:24/13:14:37|Looking up port of RPC 100003/2 on 192.168.11.99
07:04:24/13:14:37|Looking up port of RPC 100005/1 on 192.168.11.99
07:04:24/13:14:37|VFS: Mounted root (nfs filesystem) on device 0:12.
07:04:24/13:14:38|Freeing unused kernel memory: 168k init
INIT: version 2.86 booting
07:04:24/13:14:38|Starting sysinit...
07:04:24/13:14:38| Welcome to DENX & STFC Daresbury Embedded Linux Environment
07:04:24/13:14:39| Press 'I' to enter interactive startup.
07:04:24/13:14:39|Setting clock (utc): Sun Apr 7 12:14:39 BST 2024 [ OK ]
07:04:24/13:14:39|Building the cache [ OK ]
07:04:24/13:14:39|Setting hostname aida06: [ OK ]
07:04:24/13:14:41|Mounting local filesystems: [ OK ]
07:04:24/13:14:42|Enabling /etc/fstab swaps: [ OK ]
07:04:24/13:14:45|Finishing sysinit...
INIT: Entering runlevel: 3
07:04:24/13:14:48|Entering non-interactive startup
07:04:24/13:14:48|FATAL: Module ipv6 not found.
07:04:24/13:14:49|Bringing up loopback interface: [ OK ]
07:04:24/13:14:52|FATAL: Module ipv6 not found.
07:04:24/13:14:53|Starting system logger: [ OK ]
07:04:24/13:14:54|Starting kernel logger: [ OK ]
07:04:24/13:14:54|Starting rpcbind: [ OK ]
07:04:24/13:14:56|Mounting NFS filesystems: [ OK ]
07:04:24/13:14:56|Mounting other filesystems: [ OK ]
07:04:24/13:14:56|Starting xinetd: [ OK ]
07:04:24/13:14:57|Starting midas: Starting MIDAS Data Acquisition for aida06
07:04:24/13:14:58|xaida: device parameters: base=0x81000000 size=0x200000
07:04:24/13:15:03|Trying to free nonexistent resource <0000000081000000-00000000811fffff>
07:04:24/13:15:03|xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
07:04:24/13:15:03|xaida: driver assigned major number 254
07:04:24/13:15:04|Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
07:04:24/13:15:09|AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
07:04:24/13:15:09|AIDAMEM: aidamem: driver assigned major number 253
07:04:24/13:15:09|System identified is CPU ppc; Platform is unix; OS is Linux and Version is 2.6.31
07:04:24/13:15:16|Environment selected is CPU ppc; Platform unix; OS Linux and Operating System linux-ppc_4xx
07:04:24/13:15:16|MIDASBASE = /MIDAS and MIDAS_LIBRARY = /MIDAS/TclHttpd/linux-ppc_4xx
07:04:24/13:15:16|PATH = /MIDAS/bin_linux-ppc_4xx:/MIDAS/TclHttpd/linux-ppc_4xx:/MIDAS/linux-ppc_4xx/bin:/MIDAS/linux-ppc_4xx/bin:/sbin:/usr/sbin:/bin:/usr/bin
07:04:24/13:15:16|Computer Name = aida06; Temp Directory = /tmp/tcl361
07:04:24/13:15:21|
07:04:24/13:15:25|AIDA Data Acquisition Program Release 10.0.Jul 6 2022_15:10:57 starting
07:04:24/13:15:25|
07:04:24/13:15:25|Built without pthreads
07:04:24/13:15:25|
07:04:24/13:15:25|Creating NetVars
07:04:24/13:15:25|Output buffer length = 65504; format option = 4; transfer option = 3
07:04:24/13:15:25|EB transfer option = 3
07:04:24/13:15:26|NetVars creaxaida: open:
07:04:24/13:15:26|ted and initialised
07:04:24/13:15:26|StatisticsAIDAMEM: aidamem_open:
07:04:24/13:15:26| thread starting
07:04:24/13:15:26|Data Acquisition task has PID 375
07:04:24/13:15:26|Statistics thread created
07:04:24/13:15:26|Stat/Rate creation thread starting
07:04:24/13:15:26|Stat/Rate creation thread created
07:04:24/13:15:26|Hit/Rate creation thread starting
07:04:24/13:15:26|Hit/Rate creation thread created
07:04:24/13:15:26|AIDA Heartbeat thread starting
07:04:24/13:15:26|Heartbeat thread created
07:04:24/13:15:26|Installing signal handlers
07:04:24/13:15:26|Done
07:04:24/13:15:26|ModuleNum = 0
07:04:24/13:15:26|Aida Initialise complete. AidaExecV10.0: Build Jul 6 2022_15:10:57. HDL version : 03350706
07:04:24/13:15:26|package limit is not available: can't find package limit
07:04:24/13:15:26|Running with default file descriptor limit
07:04:24/13:15:26|Spectra table initialised
07:04:24/13:15:26|AIDA Data Acquisition now all ready to start
07:04:24/13:15:26|SIGBUS, SIGSEGV and SIGPIPE traps setup
07:04:24/13:15:26|package setuid is not available: can't find package setuid
07:04:24/13:15:27|Running as user 0 group 0
07:04:24/13:15:27|[ OK ]
07:04:24/13:15:36|
07:04:24/13:15:36|DENX ELDK version 4.2 build 2008-04-01
07:04:24/13:15:36|Linux 2.6.31 on a ppc
07:04:24/13:15:36|
07:04:24/13:15:36|aida06 login: /debug user |
|
Sun Apr 7 13:08:52 2024, TD, FEE64 configuration
|
FEE64 configuration per https://elog.gsi.de/despec/S100/6
Configuration: Wide - 16 FEEs, 2 DSSD
DSSD 1:
X 0-63 = 15
X 63-127 = 9
X 128-191 = 3
X 192-255 = 1
X 256-319 = 12
X 320-385 = 5
Y 0-63 = 4
Y 63-127 = 2
DSSD 2:
X 0-63 = 11
X 63-127 = 10
X 128-191 = 7
X 192-255 = 14
X 256-319 = 16
X 320-385 = 13
Y 0-63 = 8
Y 63-127 = 6
Scalers:
1 - Pulser
2 - FRS Accepted
3 - Time Machine Undelayed
4 - Time Machine Delayed
5 - SC41 L
6 - SC41 R
Thresholds (Slow / Fast / Implant)
DSSD 1 p+n : 0xA (100 keV) / 0xFF (disabled) / 0x02 (200 MeV)
DSSD 1 n+n : 0xF (150 keV) / 0xFF (disabled) / 0x02 (200 MeV) |
|
Sun Apr 7 18:13:56 2024, TD, Sunday 7 April contd. 6x
|
19.10 CAEN N1419ET LK fitted
power cycle
attachments 1-6 |
|
Mon Apr 8 11:18:19 2024, TD, S505 offline analysis data file R3_150
|
DRG quotes ( from Elog ) S505 FEE64 configuration as
"Configuration: Single/Narrow - 8 FEEs, 2 DSSDs
DSSD 1:
X 0-63 = 3 (HV -ve)
X 64-127 = 1
Y 0-63 = 4 (HV 0v)
Y 64-127 = 2
DSSD 2:
X 0-63 = 7 (HV -ve)
X 64-127 = 5
Y 0-63 = 8 (HV 0v)
Y 64-127 = 6
Scalers:
1 - Pulser
2 - n/c
3 - Time Machine Original
4 - Time Machine Delayed
5 - n/c
6 - n/c
7 - SC41 L
8 - SC41 R"
LEC (20MeV FSR) spectra
attachment 1 m_p versus m_n DSSSD#1 & DSSSD#2
attachment 2 E_p versus E_n DSSSD#1 & DSSSD#2
HEC (20GeV FSR) spectra
attachment 3 m_p versus m_n DSSSD#1 & DSSSD#2
attachment 4 E_p versus E_n DSSSD#1 & DSSSD#2
attachment variables.dat ( ADC offsets, e_diff windows & FEE64 onfiguration ) NAMELIST I/O format |
|
Tue Apr 9 08:37:47 2024, TD, Tuesday 9 April 16x
|
09.36 Cooling water temperature and flow OK
FEE64 power ON
DSSSD bias & leakage current OK - attachment 1
FEE64 temps OK - attachment 2
*except* aida02 ASIC temp which is known to be u/s
All system wide checks OK *except* aida02 and aida03 WR decoder status - attachment 3
WR timestamps OK - attachment 4
info code 4, correlation scaler, PAUSE, RESUME, DISC, ADC data item stats - attachments 5-10
per FEE64 Rate spectra - attachments 11
per 1.8.W spectra - 20us FSR - attachments 12-13
12.25 DSSSD bias & leakage current OK - attachment 16
FEE64 temps OK - attachment 15
*except* aida02 ASIC temp which is known to be u/s
ADC data item stats - attachments 14
system stable |
|
Tue Apr 9 09:04:07 2024, TD, [How To] Remote control of BNC PB-5
|
BNC PB-5 set to remote control
Login to RPi nnrpi2
ssh -X nnrpi2 -l pi
Start PB-5 app - attachment 1
./BNC-PB-5/pb5.py |
|
Tue Apr 16 23:37:58 2024, TD, Wednesday 17 April 44x
|
00.40 Observed zero data fron aida03, aida04, aida09
WR timestamps offset from other FEE64s
rebooted aida03, aida04, aida09
no change
see attachments 14-17
18.25 rebooted aida03, aida04, aida09, aida15
system wide checks OK *except* aida15 ADC not calibrated, FPGA decoder errors aida02, aida03
ADC data item stats - attachment 28
WR timestamps OK - attachment 29
data file S100_alpha/R5 - alpha background
Merger and TapeServer - attachments 30-31
c. 1Mb/s to disk
21.05 FEE64 temps OK - attachment 44
*except* aida02 ASIC temp which is known to be u/s
All system wide checks OK *except* aida15 ASDC not calibrated, WR timestam/FPGA errors - attachments 41-43
WR timestamps- attachment 40
aida03, aida04 and aida09 differ from other timestamps again
Merger and TapeServer - attachments 38-39
c. 0Mb/s to disk due to WR timestamp issues
per 1.8.W spectra - 20us FSR - attachments 36-37
per FEE64 Rate spectra - attachments 34-35
per FEE64 1.8.L spectra - attachments 32-33 |
|
Fri Apr 19 02:35:14 2024, TD, Friday 19 April 38x
|
03.30
09.10
09.25 data file S100_alpha/R11
BNC PB-5 pulser data
amplitude 10.0V
attenuation x10
tau_d = 1ms
polarity - ( initially + )
frequency 25Hz
ASIC settings2024Mar27-11.25.32
slow comparator 0x64 all FEE64s
aida02 pulser peak width 129 ch FWHM
polsrity +
aida09 pulser peak width 57 ch FWHM
09.40 switch to no storage
p+n FEE64 slow comparators 0x64 -> 0xa
n+n FEE64 slow comparators 0x64 -> 0xf
radioactive source 152Eu 370kBq installed on the bottom side of the snout, centred tranversely, located beneath bplas-DSSSD-DSSSD-bplas position.
ADC data item stats - attachment 35
9/16 < 20k, max 108k
per FEE64 Rate spectra - attachment 36
10.44 152Eu source removed
ADC data item stats - attachment 37
9/16 < 20k, max 102k
per FEE64 Rate spectra - attachment 38 |
|
Sat Apr 20 03:20:23 2024, TD, Saturday 20 April 23x
|
Note 60Co source (current activity c. 43kBq) was installed yesterday evening - assume it is positioned on the bottom side of the snout as per the other sources used this week/
04.17 DSSSD bias & leakage current OK - Grafana - attachment 1
FEE64 temperatures OK - attachment 2
aida02 ASIC temp known to be u/s
ADC data item stats - attachment 3
all FEE64 slow comparators 0x14 from yesterday's pulser walkthroughs
per FEE64 Rate spectra - attachment 4
Merger etc - attachment 5
11.24 DSSSD bias & leakage current OK - Grafana - attachment 6
FEE64 temperatures OK - attachment 7
aida02 ASIC temp known to be u/s
ADC data item stats - attachment 8
all FEE64 slow comparators 0x14 from yesterday's pulser walkthroughs
per FEE64 Rate spectra - attachment 9
Merger etc - attachment 10
17.50 DSSSD bias & leakage current OK - Grafana - attachment 11
FEE64 temperatures OK - attachment 12
aida02 ASIC temp known to be u/s
ALl syhstem wide checks OK *except* WR/FPGA errors - attachments 13-14
WR timestamps OK - attachment 15
per FEE64 Rate spectra - attachment 16
per FEE64 1.8.W spectra - 20us FSR - attachments 17-18
Merger, TapeServer, Data Links - attachments 19-20
no data storage
ADC data item stats - attachment 21
all FEE64 slow comparators 0x14 from yesterday's pulser walkthroughs
18.01 Grafana alerting shows detail of DSSSD leakage current and S4 temperature variations over time - attachment 22
DEGAS LN2 fill cycle every 6h 10.00 - 16.00 - 22.00 ... etc
https://despec-vm-01.gsi.de/grafana/d/tHRVJYfGz/aida-alerting?orgId=1 |
|
Sat Apr 20 11:40:38 2024, TD, Offline analysis R12 & R13 ( pulser walkthrough ) 17x
|
S100 ADC offsets using pulser walkthrough data from data files R12 & R13
ch = channel + ( module * 64 ) + ( range * 2048 )
adc_data( ch ) = INT( RSHIFT( ABS( adc_data( ch ) - 32768 ), 3 ) - offset( ch ) + 0.5 )
per p+n FEE64 ADC spectra (aida01-aida16 *not* aida02, aida04, aida06 & aida08) - attachments 1-12
Note common x & y-scales - peak height proxy for peak width
aida09 1.8.L (s520) pulser peak width 7 ch FWHM (~40keV FWHM)
per n+n FEE64 ADC spectra (aida02, aida04, aida06 & aida08) - attachments 13-16
Note common x & y-scales - peak height proxy for peak width
aida02 1.8.L (s72) pulser peak width 16 ch FWHM (~88keV FWHM)
ADC offset analysis
/home/npg/td/Calibration/offsets /home/npg/td/S100/R12-R13 50 1024 20 5
First pass sort variables ( ADC offsets, FEE64 configuration, LEC & HEC equal energy cuts ) - attachment 17 |
|
Sun Apr 21 00:34:33 2024, TD, Sunday 21 April 37x
|
01.35 DSSSD bias & leakage current OK - Grafana - attachment 1
FEE64 temperatures OK - attachment 2
ADC data item stats OK - attachment 3
Merger OK - attachment 4
04.05 DSSSD bias & leakage current OK - Grafana - attachment 5
FEE64 temperatures OK - attachment 6
ADC data item stats OK - attachment 7
Merger OK - attachment 8
08.20 DSSSD bias & leakage current OK - Grafana - attachment 9
FEE64 temperatures OK - attachment 10
ADC data item stats - attachment 11
increased rates observed esp. DSSSD#2 n+n
Merger etc - attachment 12
rate increased x2 cf. overnight
WR timestamp - attachment 13
aida03 out sequence
09.25 MBS data relay restarted
Merger data links - attachment 14
aida03 rate zero
per FEE64 1.8.W spectra - 20us FSR - attachments 15-16
per FEE64 Rate spectra - attachment 17
increased rate for DSSSD#2 n+n FEE64s in particular
MIDASsort online analysis - attachments 18-19
per DSSSD e_front versus e_back for LEC (20keV/channel) and HEC (20MeV/channel)
observe light ions (LEC) c. 2MeV
observe low rate of high energy ions (HEC) c. 600MeV
similar energies in both DSSSDs for LEC and HEC implying both types of event have range >> 2mm Si
10.09 DAQ STOP
aida03 does not respond - reboot aida03
DAQ RESET/SETUP etc
Synchronise ASIC clocks
All system wide checks OK *except* FPGA errors
Data transfer disabled
Histograms & stats zero'd
DAQ GO
Merger restarted
Data transfer enabled
DAQ GO
WR timestamp OK - attachments 20-21
ADC data item stats OK - attachment 22
rates status quo ante
Merger etc OK - attachment 23
14.58 DSSSD bias & leakage current OK - Grafana - attachment 24
FEE64 temperatures OK - attachment 25
ADC data item stats OK - attachment 26
Merger etc OK - attachment 27
18.13 DSSSD bias & leakage current OK - Grafana - attachment 28
FEE64 temperatures OK - attachment 29
ADC data item stats OK - attachment 30
Merger etc OK - attachment 31
20.30 Primary c, few kHz 170Er beam to S4 - upstream s/steel flange removed
Start of stopping range calibration in the implantation stack - currently ion appear to be stopping in DSSSD#1 (upstream)
Decay and implant events as function of time showing spill structure - attachment 32
per DSSSD e_front versus e_back (HEC, 20MeV/channel) - attachment 33
per DSSSD x versus y hit pattern (HEC) - attachment 34
mapping to be configured but clear ions are mostly implanted in centre of DSSSD#1
2D colour/contour levels - attachment 35
per DSSSD m_front versus m_back (HEC) - attachment 36
per DSSSD per pixel HEC-HEC time (4.096us/channel) - attachment 37
23.44 aida02 has stopped running
DAQ STOP
aida02 rebooted
Data transfer disabled
DAQ RESET/SETUP
Synchronise ASIC clocks
All system wide checks OK *except* FPGA errors
Histograms & stats zero'd
DAQ GO
Merger restarted
Data transfer enabled
DAQ GO
|
|
Sun Apr 21 23:20:45 2024, TD, Monday 22 April 38x
|
00.15 Data link to MBS was closed by MBS - reason(s) unknown
NH restarted MBS receiver and data transfer restarted
01.34 DSSSD bias & leakage current OK - attachment 1
FEE64 temperatures OK - attachment 2
ADC data item stats OK - attachment 3
Merger, TapeServer etc - attachment 4
04.36 DSSSD bias & leakage current OK - attachment 5
FEE64 temperatures OK - attachment 6
ADC data item stats OK - attachment 7
Merger, TapeServer etc - attachment 8
07.54 data storage to local disk enabled
file aida-gsi:/TapeData/S100_alpha/R14_
09.36 DAQ continues, current data file R14_46
168Er setting
DSSSD bias & leakage current OK - attachments 9 & 10
leakage current DSSSD#1 ramping and cycling with beam spills
FEE64 temperatures OK - attachment 11
System wide checks OK *except* WR/FPGA errors - attachments 12-13
WR timestamps - attachment 14
aida04 out of seq
ADC data item stats - attachment 15
high rates observed all FEE64s beam on, beam off rates OK
per FEE64 Rate spectra - attachment 16
per FEE64 1.8.L spectra - attachments 17-18
per FEE64 1.8.W spectra - attachments 19-20
per FEE^4 1.8.H spectra - attachments 21-22
Merger, TapeServer etc - attachments 23-25
data rates to c. 10Mb/s beam on
09.55 aida04 rebooted - https://elog.ph.ed.ac.uk/DESPEC/586
10.01 DAQ restarted
data file R15
ADC data item stats - attachments 26-27
large variation in rates beam off/on
c. 10.30 beam off (for new FRS setting?)
11.25 analysis of data files R14_19 (beam ON) and R15_24 (beam OFF) - attachments 28-29
For beam ON max deadtime c. 11% (aida04), beam OFF max deadtime c. 0.1% (aida04)
Zero timewarps observed
Notice large # of PAUSE/RESUME data items for aida03 & aida04 presumably due to additional overhead of processing the time machine scalers
12.35 Beam off
DSSSD bias & leakage current OK - attachment 30
Can observe beam spill structure in DSSSD leakage currents - now slowly recovering with beam off
FEE64 temperatures OK - attachment 31
ADC data item stats OK - attachment 32
Merger, TapeServer etc - attachment 33
12.55 New ASIC settings 2024Apr22-12.55.38
*all* discs disabled to reduce load on aida04
slow comparator 0x14
BNC PB-5 settings (since yesterday evening)
Amplitude 10.0V
Attenuation x10
tau_d 1ms
Frequency 2Hz
Tail pulse
Polarity +
13.46 all histograms & stats zero'd
13.48 Beam off
per FEE64 Rate spectra - attachment 34
2Hz pulser to p+n FEE64s
per FEE64 1.8.W spectra - attachments 35-36
p+n FEE64 threshold = 6000 to capture pulser events
n+n FEE64 threshold = 8000 to capture noise
per p+n FEE64 1.8.L spectra - attachments 37-38
common x/y-scale - peak height proxy for peak width
aida09 pulser peak width 57 ch FWHM ~40keV FWHM ( 5 x sigma ~ 85keV )
14.28 168Eu setting (check only - setup still in progress) |
|
Mon Apr 22 09:03:54 2024, TD, Report: aida04 stops producing data
|
09.14 aida04 stopped producing data - system console output - attachment 1
It is not clear (to me at least) whether the cause is radiation-induced single event upsets or
the start/stop of LN2 fills.
Nor is it clear why the FEE64 stops
- WR timestamp error (data link to Merger blocks)
- AIDAExecV10 fails
- ?
rebooted aida04
DAQ RESET/SETUP etc cycle for all FEE64s
10.03 successful restart
current data file R15 |
|
Mon Apr 22 11:43:55 2024, TD, 21-22.4.24 overnight MIDASsort online sort 7x
|
Attachment 1 - per DSSSD LEC e_p versus e_n (20keV/channel)
Attachment 2 - per DSSSD HEC m_p versus m_n
Attachment 3 - per DSSSD HEC x versus y (I really do need to sort out the mapping!)
Attachment 4 - per DSSSD HEC e_p versus e_n (20MeV/channel)
Attachment 5 - per DSSSD per pixel HEC-HEC time (4.096us/channel)
Attachment 6 - per DSSSD implant/decay event rates (262.144us/channel)
showing beam spill cycle
Attachment 7 - colours/contour levels for all 2D spectra |
|
Mon Apr 22 22:35:59 2024, TD, 00.00-08.00 Tuesday 22 April 26x
|
23.36 Analysis of data file R17_34 - attachment 1
max deadtime c. 1% (aida02)
no timewarps
23.38 DSSSD bias & leakage current OK - attachment 2
FEE64 temperatures OK - attachment 3
aida02 ASIC temp - known fault
ADC data item stats - attachment 4
per FEE64 Rate spectra - attachment 5
Merger etc - attachment 6
01.03 DSSSD bias & leakage current OK - attachment 7
FEE64 temperatures OK - attachment 8
aida02 ASIC temp - known fault
ADC data item stats - attachment 9
per FEE64 Rate spectra - attachment 10
Merger etc - attachment 11
03.06 DSSSD bias & leakage current OK - attachment 12
FEE64 temperatures OK - attachment 13
aida02 ASIC temp - known fault
ADC data item stats - attachment 14
per FEE64 Rate spectra - attachment 15
Merger etc - attachment 16
05.04 DSSSD bias & leakage current OK - attachment 17
FEE64 temperatures OK - attachment 18
aida02 ASIC temp - known fault
ADC data item stats - attachment 19
per FEE64 Rate spectra - attachment 20
Merger etc - attachment 21
07.29 DSSSD bias & leakage current OK - attachment 22
FEE64 temperatures OK - attachment 23
aida02 ASIC temp - known fault
ADC data item stats - attachment 24
per FEE64 Rate spectra - attachment 25
Merger etc - attachment 26 |
|
Tue Apr 23 13:08:28 2024, TD, Summary of AIDA FEE64 stops
|
We have observed a number of AIDA FEE64s stop producing data.
Summary of dates & (approximate) times
aida03 21.4.24 08.20
aida04 22.4.24 09.14 https://elog.ph.ed.ac.uk/DESPEC/586
aida01 22.4.24 16.00
aida02 22.4.24 22.00
aida02 23.4.24 10.21
aida02 23.4.24 11.25
aida04 23.4.24 16.53? attachment 2
aida04/aida05 25.4.24 22.28 no messages in aida04 system console
aida04 27.8.24 c.23:00
aida04 28.8.24 c. 12-13:00 power cycle
aida04 28.8.24 c. 16.00 reset per Elog 618
aida02 28.4.24 c. 22.20 reset per Elog 618, no error messages in system console
aida04 29.4.24 01.15
aida04 30.4.24 <03.30
aida02 30.4.24 <10.00
aida02 2.5.24 c. 19.30 reset
In future, it would be useful to copy system console reports to the Elog to check whether we can identify common error messages etc.
ssh pi@nnrpi1
<password>
cd logs
cat /ttyUSBx
The current mapping of USB port # to AIDA FEE64s - attachment 1
aida02 system console c. 19.30 2.5.24
02:05:24/14:40:51|executing generic doStop
02:05:24/19:27:28|Halt (1)
02:05:24/19:27:29|Halt (2)
02:05:24/19:27:29|Halt (3)
02:05:24/19:27:30|Halt (4)
02:05:24/19:27:30|Halt (5)
02:05:24/19:27:31|Halt (6)
02:05:24/19:27:31|Halt (7)
02:05:24/19:27:32|Halt (8)
02:05:24/19:27:32|Halt (9)
02:05:24/19:27:33|Halt (10)
02:05:24/19:27:33|Halt (11)
02:05:24/19:27:34|Halt (12)
02:05:24/19:27:34|Halt (13)
02:05:24/19:27:35|Halt (14)
02:05:24/19:27:35|Halt (15)
02:05:24/19:27:36|Halt (16)
02:05:24/19:27:36|Halt (17)
02:05:24/19:27:37|Halt (18)
02:05:24/19:27:38|Halt (19)
02:05:24/19:27:38|Action has not completed
02:05:24/19:27:39|Giving up waiting
02:05:24/19:27:39|disconnect xfer stream #0 (1)
02:05:24/19:27:39|disconnect xfer stream #0 (2)
02:05:24/19:27:39|disconnect xfer stream #0 (3)
02:05:24/19:27:40|disconnect xfer stream #0 (4)
02:05:24/19:27:40|disconnect xfer stream #0 (5)
02:05:24/19:27:41|disconnect xfer stream #0 (6)
02:05:24/19:27:41|disconnect xfer stream #0 (7)
02:05:24/19:27:42|disconnect xfer stream #0 (8)
02:05:24/19:27:42|disconnect xfer stream #0 (9)
02:05:24/19:27:43|disconnect xfer stream #0 (10)
02:05:24/19:27:43|disconnect xfer stream #0 (11)
02:05:24/19:27:44|disconnect xfer stream #0 (12)
02:05:24/19:27:44|disconnect xfer stream #0 (13)
02:05:24/19:27:45|disconnect xfer stream #0 (14)
02:05:24/19:27:46|disconnect xfer stream #0 (15)
02:05:24/19:27:46|disconnect xfer stream #0 (16)
02:05:24/19:27:47|disconnect xfer stream #0 (17)
02:05:24/19:27:47|disconnect xfer stream #0 (18)
02:05:24/19:27:48|disconnect xfer stream #0 (19)
02:05:24/19:27:48|Action has not completed
02:05:24/19:27:49|Giving up waiting
02:05:24/19:27:49|executing generic Stop_Merger
02:05:24/19:27:49|executing generic Stop_DataStorageServer
02:05:24/19:27:49|completed generic doStop
02:05:24/19:27:49|do_GetState returned z=0 and 1
02:05:24/19:27:49|do_GetState returned z=0 and 1
02:05:24/19:28:01|Transfer Error - : Connection reset by peer
02:05:24/19:28:08|send() failed:
02:05:24/19:28:08|Aida state now Stopped. AidaExecV10.0_Jul 6 2022: Build 15:10:57
02:05:24/19:28:08|do_GetState returned z=0 and 0
02:05:24/19:28:13|executing generic doGo
02:05:24/19:28:45|Initialising communication with storage server 192.168.11.99 on port 11002
02:05:24/19:28:45|Setting Transfer Block Size 65536
02:05:24/19:28:45|Setting Transfer Mode 3
02:05:24/19:28:45|Setting Overlap Mode 0
02:05:24/19:28:45|Setting Blocking Mode 0
02:05:24/19:28:45|Setting nice 0
02:05:24/19:28:45|TCP transfer library version 3.12
02:05:24/19:28:45|TCP socket send buffer was 16384 - now 221184
02:05:24/19:28:45|TCP socket receive buffer was 87380 - now 221184
02:05:24/19:28:45|TCP socket created OK - now connecting to 192.168.11.99 port 11002
02:05:24/19:28:45|Connected to 192.168.11.99 port 11002
02:05:24/19:28:45|connect xfer stream #0 (1)
02:05:24/19:28:45|Data Acquisition Statistics counters now cleared
02:05:24/19:28:46|ASIC DMA buffer size 2097152; WAVE DMA buffer size 1048576
02:05:24/19:28:46|Aida state now Going. AidaExecV10.0: Build Jul 6 2022_15:10:57
02:05:24/19:28:46|Go (1)
02:05:24/19:28:46|Running Go_Electronics for aida02 with TSMaster aida01
02:05:24/19:28:46|ADCs Calibrated.
02:05:24/19:28:46|Finished Go_Electronics for AIDA
02:05:24/19:28:46|executing generic Go_Merger
02:05:24/19:28:46|executing generic Go_DataStorageServer
02:05:24/19:28:46|completed generic doGo
02:05:24/19:28:46|do_GetState returned z=0 and 1
02:05:24/19:28:46|In RDOGo_Operate: Enabled Correlation, ASIC and discriminator readout
02:05:24/19:28:51|Also in RDOGo_Operate: Enabled waveform readout
02:05:24/19:28:51|get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
02:05:24/19:28:51|WV:0:Buffer info. Length = 64 : Offset = 0
02:05:24/19:28:51|WV:1:Buffer info. Length = 62 : Offset = 2
02:05:24/19:28:51|WV:2:Buffer info. Length = 60 : Offset = 4
02:05:24/19:28:52|WV:3:Buffer info. Length = 58 : Offset = 6
02:05:24/19:28:52|WV:4:Buffer info. Length = 56 : Offset = 8
02:05:24/19:28:52|WV:5:Buffer info. Length = 54 : Offset = 10
02:05:24/19:28:52|WV:6:Buffer info. Length = 52 : Offset = 12
02:05:24/19:28:52|WV:7:Buffer info. Length = 50 : Offset = 14
02:05:24/19:28:52|WV:8:Buffer info. Length = 48 : Offset = 16
02:05:24/19:28:52|WV:9:Buffer info. Length = 46 : Offset = 18
02:05:24/19:28:52|get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
02:05:24/19:28:52|get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0908
02:05:24/19:28:52|get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0908
02:05:24/19:28:52|get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0908
02:05:24/19:28:52|get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0908
02:05:24/19:28:52|get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0908
02:05:24/19:28:52|get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0908
02:05:24/19:28:52|get_WAVEBlk (A) which = 0 ---- status = 1048, State machines = 0201
02:05:24/19:28:52|get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0908
02:05:24/19:28:52| |
|
Tue Apr 23 15:11:50 2024, TD, Tuesday 23 April 16:00-00:00 20x
|
16.12 Analysis of data file R17_101 - attachment 1
max deadtime c. 2% (aida02)
no timewarps observed
16.15 DSSSD bias & leakage current OK - attachment 2
FEE64 temperatures OK - attachment 7
ADC data item stats - attachment 3
per FEE64 rate spectra (on and off spill) - attachments 4-5
Merger etc - attachment 6
16.53 aida04 stops producing data
DAQ STOP fails for aida04
Restart Merger to enable aida04 to complete DAQ STOP
aida04 rebooted and DAQ restarted OK
data file S100_alpha/R18 |
|
Tue Apr 23 22:37:46 2024, TD, 00:00-08:00 Wednesday 24 April 18x
|
23.34 23.4.24
DSSSD bias & leakage current OK - attachment 2
FEE64 temperatures OK - attachment 2
ADC data item stats - attachment 3
per FEE64 rate spectra - attachments 4
Merger etc - attachment 5
03.41 fDSSSD bias & leakage current OK - attachment 6
FEE64 temperatures OK - attachment 7
ADC data item stats - attachment 8
per FEE64 rate spectra (off and on spill) - attachments 9-10
Merger etc - attachment 11
03.54 analysis data file R18_67 - attachment 12
max deadtime 11% (aida04)
HEC data item rate c. 1.5kHz
no timewarps
0.35 fDSSSD bias & leakage current OK - attachment 13
FEE64 temperatures OK - attachment 14
ADC data item stats - attachment 15
per FEE64 rate spectra - attachments 16
Merger etc - attachment 17
03.54 analysis data file R18_96 - attachment 18
max deadtime 12% (aida04)
HEC data item rate c. 1.6kHz
no timewarps |
|
Wed Apr 24 09:04:55 2024, TD, 08:00-16:00 Wednesday 24 April 33x
|
09.56 DAQ continues data file S100_alpha/R18_122
FRS setting 162Eu
DSSSD bias & leakage current OK - attachments 1-2
FEE64 temperatures OK - attachment 3
aida02 ASIC temp - known fault
All system wide checks OK *except* as shown - attachments 4-6
WR timestamps OK - attachment 7
ASIC settings aida01 & aida02 - attachments 8-9
ADC, DISC, PAUSE, RESUME, WR & Correlation Scaler data time stats - attachments 10-15
per FEE64 Rate spectra - attachments 16-18
unusually can observe HEC Rates esp. in DSSSD #1
per p+n FEE64 1.8.L spectra - attachments 19-21
aida09 pulser peak width 61 ch FWHM
common x/y scale => peak height proxy for width => all p+n FEE64s similar pulser peak widths
per n+n FEE64 1.8.L spectra - attachment 22
per FEE64 1.8.H spectra - attachments 23-24
per FEE64 1.8.W spectra - 20us FSR - attachments 25-26
only aida08 & aida09 currently updating - ASIC check load and/or DAQ STOP/GO required?
Merger, TapeServer etc - attachments 27-28
ucesb - attachments 29-30
spill cycle reported as 3.5s, extraction 1.5s
10.36 All histograms & stats zero'd
BNC PB-5 settings - attachment 31
DSSSD bias & leakage current - Grafana Alerting - attachment 32
can observe bias & leakage current in greater detail
DSSSD #1 bias stable, c. 10s nA micro structure observed in leakage current
DSSSD #2 bias c. 10mV variations, micro structure observed in leakage current but smaller variations cf. DSSSD#1
10.46 analysis of data file R18_131
max dead time 12% aida04, 6% aida02, all others 0.1% or less
no timewarps
HEC data item rates 1.6kHz - correcting for spill cycle => 2.3kHz in spill (online analysis shows no HEC events observed outside spill)
assume typical HEC event multiplicity = 3 => implant rate ~ 760Hz in spill or 2700 implants per spill
SC42 L/R currently report c. 2kHz
|
|