AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

CARME, Page 27 of 33

New |  Find |  Select |  Import |  Config |  Last day |  Help

New entries since: Thu Jan 1 01:00:00 1970

Full | Summary | Threaded     -- All entries -- Last day Last 3 Days Last week Last month Last 3 Months Last 6 Months Last Year  654 Entries

Goto page Previous  1, 2, 3 ... 26, 27, 28 ... 31, 32, 33   Next

ID Date Author Subject Text   134   Sun Oct 31 07:29:17 2021 CB JM + RSS OG Detectors mounted on plate in CARME (Wed 27 October) Dismounted plate from rod. Dismounted broken detectors from plate and placed back  8x    133   Sun Oct 31 07:21:09 2021 CB JM RSS Detectors arrived in GSI (Tue 26 October) Two new CARME DSSD arrived in GSI and collected. Visually inspected both sides.  6x    132   Fri Oct 29 15:09:27 2021 CB JM + RSS OG DR Preparation to mount new DSSDs (Mon 25 October - Tue 26 October) Considered different strategies to mount DSSDs inside CARME, while waiting  6x    131   Sat Oct 23 12:58:11 2021 JM GSI vacuum and bakeout testing summary Attachment 1 shows the pump-down of the CARME chamber at GSI before installation of kapton cabling inside the chamber and      130   Fri Oct 22 13:22:48 2021 TD CARME FEE64 adaptor PCB    10x    129   Fri Oct 22 13:11:26 2021 TD MSL type TTT14 assembly drawings & pin assignments        128   Thu Oct 21 20:26:44 2021 JM TD Thermocouple and Connector cables NEG pump electrical connections tested - all connections sound.  Detector carriers have been redrilled  10x    127   Mon Oct 18 16:25:11 2021 JM RSS TD NEG rotation + cable removals Kapton cabling and the broken ceramic detector holder have been separated. Required holding jacking plate in a vice and using lots of      126   Sun Oct 17 11:48:48 2021 TD RSS Sunday 17 October Looking downstream the RHS motor assembly has  loose green/yellow (gnd?) see attachment 1  14x    125   Sat Oct 16 17:25:47 2021 RSS TD Broken detectors One of the detectors was damaged while mounting (see pictures 1-3). Second detector was found already      124   Fri Oct 15 19:37:12 2021 RSS TD + DR Friday 15 October Ring seal is out. See picture 1. Bellow (towards CARME) was installed in the gas jet chamber. Attached are some  8x    123   Thu Oct 14 15:54:47 2021 TD RSS Thursday 14 October Attachment 1 - what is function of the 4x c/s holes indicated?      122   Wed Oct 13 15:28:22 2021 RSS TD + OG Split funnels Split funnels installed on 4 (of 8) 2x78 way D connector feed-throughs.  7x    121   Wed Oct 13 15:16:12 2021 TD Orientation of 2x 78 way D connector feedthroughs Looking downstream      120   Wed Oct 13 12:06:09 2021 RSS TD Flanges cleaned RSS & TD had some success cleaning the COF600 flange surfaces of the staining and residues observed when the downstream COF600 section  12x    119   Wed Oct 13 11:59:23 2021 TD [How to] Open COF600 copper wire seals Use the M10 jacking points provided top/bottom and       118   Tue Oct 12 13:54:21 2021 RSS TD + OD DR CARME opened With the assistance of Oemer and Davide all of the M22 bolts removed from the downstream section of the CARME chamber. To separate  20x    117   Tue Oct 12 09:22:37 2021 RSS TD + OG DR Motors problem solved Neg and ion cables were taken off and were put in the box. Top support was taken off.      116   Mon Oct 11 11:24:16 2021 RSS TD ML Valve support and cable labeling Split funnels were given to Oemer for cleaning. Have received them back after lunch. Valve support is installed again      115   Sat Oct 9 09:47:33 2021 CB To do list for next week 0. Give split-funnels to OG or Grossmontage to clean. Mount back foot support for gate valves. Critical when we split.

Goto page Previous  1, 2, 3 ... 26, 27, 28 ... 31, 32, 33   Next

ELOG V3.1.4-unknown