/MIDAS/Linux/startup/datarelaymbs 

Updated figures as of 27 Feb 2021 - S4 is now closed for experiments but may open on Wednesday.
Snout has been grounded and all FEEs are seemingly grounded properly.

Figure  1: Good Events
Figure  2: Rate Histograms (Log-y)
Figure  3: Waveforms (Odd)
Figure  4: Waveforms (Even)
Figure  5: Waveforms @ 5MS/s (Odd)
Figure  6: Waveforms @ 5MS/s (Even)
Figure  7: Waveforms with Pulser (Odd)
Figure  8: Waveforms with Pulser (Even)*
Figure  9: Waveforms with Pulser @ 5MS/s (Odd)
Figure 10: Waveforms with Pulser @ 5MS/s (Even)*

* y-Scale enlarged from 0-10000 to 0-15000 to capture top of pulse

The ground cable (LEMO00) in aida07 was disconnected, it has been reinserted and the waveforms now look good.

(All data below taken with thresholds 0xA for all)

Noise in aida09 is visible and aida12 is quite high too. (All of DSSD3? Except aida10?)
Event rate in them is very high. The lower frequency noise visible in figs 5,7 seems slow enough for the ASICs
DSSD#2 has nice event rate and DSSD#1 seems "OK"

Leakage currents high but S4 very warm at the moment as roof is still closed.

Some PCBs from bPlas are touching the ribbon cables, so should be insulated better.

Next S4 access later this week will reseat all connectors to ensure good connection.
Other ideas can also be done

Figures: 1, 2 - Good Event + ADC Data Stats
Figure 3 - Rate Spectra (log scale)
Figure 4, 5 - Odd FEE64s Waveforms, 50 MS/s (Sample rate 0) and 5 MS/s (Sample rate 10)
Figure 6, 7 - Even FEE64s Waveforms, 50 MS/s (Sample rate 0) and 5 MS/s (Sample rate 10)
Figure 8 - Grafana (DSSD HV)

aida01-aida04 DSSD 1
aida05-aida08 DSSD 2
aida09-aida12 DSSD 3

A background run has been started to check the AIDA channels.
It is in /TapeData/BGFEB21

Due to some noisy channels the data rate is high (1.5 MB/s) even at 0x64

S4 access will be limited. 

I do not know when open if it is worth looking at changing the adapter PCBs of it is more likely DSSD internal.

> 01.02.2021 - Four new sets of PSU, HDMI & Ethernet cables were ran from the DESPEC rack to the AIDA frame, in preparation for 4 new FEE64s.
> A new 7 port USB hub has also been placed for the last few serial connections.
> 
> For the first experiment this year, we will run with a narrow AIDA configuration as in 2020. (12 FEEs)
> 
> The system has been powered up and biased successfully. To be monitored over the next few days.
> 
> A lot of the FEE serial monitors are missing, I think a hub has been disconnected from nnrpi1. This will be investigated on Wednesday.
> The rack will also be grounded properly on Wednesday to investigate the impact on the noise.
> 
> A single new water line (feed and return) needs to be installed for the 16th FEE, this will be done once the hose is found/ordered...
> 
> The 4 new FEE64s will be mounted and powered up at some point to obtain the MAC addresses, and possibly check MIDAS merging 16 FEE64s.
> 
> Waveform data will be taken wednesday before & after grounding the rack to see noise situation currently

05.02.2021 -
The serial hub was disconnected and was reconnected. Unfortunately nnrpi1 seems to have gone offline so cannot be used still. Will try to reboot pi when possible.

The hose has arrived and the water line will be prepared in my office mid next week.

All the leaf MACBs have been updated to the latest firmware (MACB_GSI_Simple.jed) and set to mode '0'. A fourth leaf MACB is now in the NIM crate but has no HDMI connections in or out yet.
All 12 FEEs powered up and have no WR issues (one MABC was first set to wrong mode, but was fixed)

A new tape server to support unmerged waveform readout has been loaded and documented by VP. This will largely be unused but the option is there and will be tested.

The rack was grounded to the platform floor with a large cable to potentially improve situation. Waveforms before (fig 1-2) and after (fig 3-4) attached.

There will be a DESPEC Dry Run next week Mon-Tue.

01.02.2021 - Four new sets of PSU, HDMI & Ethernet cables were ran from the DESPEC rack to the AIDA frame, in preparation for 4 new FEE64s.
A new 7 port USB hub has also been placed for the last few serial connections.

For the first experiment this year, we will run with a narrow AIDA configuration as in 2020. (12 FEEs)

The system has been powered up and biased successfully. To be monitored over the next few days.

A lot of the FEE serial monitors are missing, I think a hub has been disconnected from nnrpi1. This will be investigated on Wednesday.
The rack will also be grounded properly on Wednesday to investigate the impact on the noise.

A single new water line (feed and return) needs to be installed for the 16th FEE, this will be done once the hose is found/ordered...

The 4 new FEE64s will be mounted and powered up at some point to obtain the MAC addresses, and possibly check MIDAS merging 16 FEE64s.

Waveform data will be taken wednesday before & after grounding the rack to see noise situation currently

AIDA Frame is now grounded to platform (will add photo later)

Waveforms improved from April (c.f. https://elog.ph.ed.ac.uk/DESPEC/125) but comparison not truly fair (other systems may be offline now)

FYI:

The SD card on nnrpi2 was full again causing issues, the log files in /var/log (kern.log & messages) were *huge* and filled with the same error many times a second

Oct  4 15:01:22 raspberrypi kernel: [1030048.603846]                                                                                                                                                                                                                                                                         
Oct  4 15:01:22 raspberrypi kernel: [1030048.607742] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode                                                                                                                                                                             
Oct  4 15:01:22 raspberrypi kernel: [1030048.607742]                                                                                                                                                                                                                                                                         
Oct  4 15:01:22 raspberrypi kernel: [1030048.667755] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode                                                                                                                                                                             
Oct  4 15:01:22 raspberrypi kernel: [1030048.667755]                                                                                                                                                                                                                                                                         
Oct  4 15:01:22 raspberrypi kernel: [1030048.667848] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode                                                                                                                                                                             
Oct  4 15:01:22 raspberrypi kernel: [1030048.667848]                                                                                                                                                                                                                                                                         
Oct  4 15:01:22 raspberrypi kernel: [1030048.731753] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode                                                                                                                                                                             
Oct  4 15:01:22 raspberrypi kernel: [1030048.731753]                                                                                             

A google issue showed that this was fixed in an update to Linux kernel, so I updated the kernel to the latest version.
now the message doesn't seem to appear so hopefully the pis won't break so rapidly.

MIDAS was not working properly on nnrpi2 - power cycled. Now system does not boot properly, it gets stuck trying to login claiming "PAM critical error" - probable file system corruption?
Will investigate if SD card can be checked and repaired

Last week there was a power failure in Messhuette (FRS control room) - AIDA-3 and MBS were affected.
AIDA itself and S4 equipment is on UPS and was not shut down.

AIDA-3 has been restarted and MIDAS restarted. All seems OK

S4 conditions: 24.2 C / 33.5% RH / Td = 7.1 C 

Loaded new frimware into all 12 FEE64s in the system. IWR_Dec19_4.bin 

Booted ok after power-cycle.  

RESET/SETUP/GO all fine.

system wide checks ( SWC ) clocks, white rabbit ( WR ) OK, ADC calibrated : aida10 failed. Couldn't get them to calibrate.

Checked aida01 waveforms for ASIC1. set threshold for LED to 5000 to stop triggering in the noise.

Set White Rabbit register SYNC Rollover Target ( 14 ) to 0x4000 instead of 0xe to reduce the data rate to better understand the waveform activity.

All FEE64s are set to enable all channels of ASIC1 with low thresholds so a lot of data moving. Checked activity using statistics window.

Checked waveforms working for ASIC1 of aida01. Noisy but capturing the pulser pulse.

 Enabled all the waveforms on aida01 to see if they all function ok. After a few seconds waveform readout stopped. Not sure of the reason.

STOP, change all four thresholds to 5000, Check ASIC controls : all ok, GO. No activity.

RESET/SETUP ok.

SWC : clock failed, ADC failed , WR ok ????

Power-cycle...... concludes ok, RESET/SETUP ok, SWC : clocks all failed, ADC all failed, WR ok.

Checked WR status browser page for aida01. WR timestamp 0 ! status : 0xA should be 0 .

Checked tcl for SWC WR check and it doesn't check the status. Changed at DL and at GSI and now it does.

so SWC WR check no all fails.

Contacted NH and he found Fatima VME crate with WR source in had been switched off. It was powered on again.

RESET/SETUP , SWC: clocks all ok, ADC all ok, WR all ok.

set aida01 and all odd number  LED thresholds to 5000 and aida02 all even number thresholds to 10000 and activity of statistic Wave Good Events is similar across the system. 

Checked each of the Waveform capture controls pages ( only shows the status registers for ASIC1 ) and all are fine, nothing sticking.

enabled all the ASIC waveforms on aida01 again and it sticks, clear out three ASICs and operate the waveform reset in the System Functions and it restarts and runs.

So a qualified success. Don't enable too many channels at once ?

left running at 18:00 UK time and checked at 21:30 UK time , still operating ok.

08:25 Beam Stopped, end of S480

Tape Server stopped at R12_2097

Started again in no storage mode

Will leave compressing runs

02:14 all system wide checks okay 
      FEE temperatures okay 
      leakage currents okay and recorded to spreadsheet 
      good event stats okay 
      merger running at around 3M items/sec
      tape service running at 26MB/sec

All attached to this entry with screenshots to 1-7

02:14 all system wide checks okay 
      FEE temperatures okay 
      leakage currents okay and recorded to spreadsheet 
      good event stats okay 
      merger running at 3M items/sec
      tape service running at 26MB/sec

All attached to this entry with screenshots to 1-7

04:05 all system wide checks okay 
      FEE temperatures okay 
      leakage currents okay and recorded to spreadsheet 
      good event stats okay 
      merger running at 3M items/sec
      tape service running at 26MB/sec

All attached tp this entry with screenshots 7-14

ASIC settings 2019Oct31-13.24.23
     slow comparator 0xa

BNC PB-5 pulser
     amplitude 1.0V , attenuator x1
     frequency 2Hz
     decay time 1ms

07:46 all system wide checks ok

      good event statistics ok - attachment 1
  
      FEE64 temperatures ok - attachment 2

      detector bias/leakage currents ok - attachment 3

08:48 merger ok ~ 3 million data items/s

      TapeServer ok ~ 27 MB/s

      data forwarding to MBS ok

08:50 AIDA writing to file SecondDrive/TapeData/S480/R12_1524

09:56 all system wide checks ok

      good event statistics ok - attachment 4

      detector bias/leakage currents ok - attachment 5
  
      FEE64 temperatures ok - attachment 6

12:09 all system wide checks ok


12:13 all system wide checks ok

      good event statistics ok - attachment 7
  
      FEE64 temperatures ok - attachment 8

      detector bias/leakage currents ok, but ramping up - attachment 9


13:32 merger ok ~ 3 million data items/s

      TapeServer ok ~ 23 MB/s

      data forwarding to MBS ok

      Beam seems to be off

13:33 AIDA writing to file R12_1743

*update* checked DESPEC S480 Elog, issues with UNILAC, beam lost at 13:29

13:55 beam back

13:57 AIDA writing to file R12_1759

14:35 all system wide checks ok

      FEE64 temperatures ok - attachment 10

      good event statistics ok - attachment 11
  
      detector bias/leakage currents ok, but ramping up - attachment 12

15:18 merger ok ~ 2.7 million data items/s

      TapeServer ok ~ 27 MB/s

      data forwarding to MBS ok

      AIDA writing to file R12_1283

16:00 1.8.H high energy spectra - attachments 13 & 14

      hit-rate spectra - attachment 15
 
16.22 all system wide checks okay 
      FEE temperatures okay (attachment 16)
      leakage currents okay and recorded to spreadsheet (attachment 17)
      good event stats okay (attachment 18)
      merger running at 3M items/sec
      tape service running at 26MB/sec

18.00 began compressing R7 files with command: nice -n 10 gzip -v R7_* &
      
      all system wide checks okay 
      FEE temperatures okay (attachment 19)
      leakage currents okay and recorded to spreadsheet (attachment 20)
      good event stats okay (attachment 21)
      merger running at 3M items/sec
      tape service running at 27MB/sec    

20.10 all system wide checks okay 
      FEE temperatures okay (attachment 22)
      leakage currents okay and recorded to spreadsheet, detectors 1 and 2 still rising (attachment 23)
      good event stats okay (attachment 24)
      merger running at 3M items/sec
      tape service running at 25MB/sec

      rates histogram (attachment 25)
      low energy histograms (attachment 26 and 27)
      high energy histograms (attachments 28 and 29)

      
22.07 all system wide checks okay 
      FEE temperatures okay (attachment 30)
      leakage currents okay and recorded to spreadsheet (attachment 31)
      good event stats okay (attachment 32)
      merger running at 3M items/sec
      tape service running at 25MB/sec
      currently on R12_2097

23.56 all system wide checks okay 
      FEE temperatures okay (attachment 33)
      leakage currents okay and recorded to spreadsheet (attachment 34)
      good event stats okay (attachment 35)
      merger running at 3M items/sec
      tape service running at 26MB/sec
      
finishing up now. night shift group have been informed how to check up on AIDA, there is a sheet on the table with relevant information
      

AIDA ELog filled out by DESPEC night shift members Matthew Brunet (MB), Shaheen Jazrawi (SJ), and Matthias Rudiger (MR).

0:05-0:08 Beam operators altering settings, beam off/sporadic during this period.

0:46
    All system wide checks passed
    Leak currents lower than previous measurement - attachment #1
    Implants look as previously - attachment #2
    Stats about where they have been - attachment #3
    FEE temperatures fine - attachment #4
    Merger fine, 3 Mega items / sec
    TapeServer writing about 25 MB/s

2:46

      All system wide checks passed
     Leak currents similar to previous - attachment #5 
     Implants look as previously - attachment #6
     Stats about where they have been - attachment #7
     FEE temperatures fine - attachment #8
     Merger fine, 3 Mega items / sec
     TapeServer writing about 27 MB/s
 

4:49

      All system wide checks passed
     Leak currents similar to previous - attachment #9
     Implants look as previously - attachment #10
     Stats good - attachment #11
     FEE temperatures fine - attachment #12
     Merger fine, 3 Mega items / sec
     TapeServer writing about 27 MB/s

6:49

      All system wide checks passed
     Leak currents no significant change - attachment #13
     Implants look as previously - attachment #14
     Stats good - attachment #15
     FEE temperatures fine - attachment #16
     Merger fine, 3 Mega items / sec
     TapeServer writing about 25 MB/s

8:15
    All system wide checks passed
    Leak currents are continuing to creep up - attachment #1
    FEE temperatures fine - attachment #2
    Stats about where they have been - attachment #3
    Implants look as previously (5ish counts per channel in SSD1 and SSD2) - attachment #4
    Merger fine, 3 Mega items / sec
    TapeServer still writing about 25 MB/s

09.37 analysis of data file S480/R12_443
      deadtime aida09 c. 5%, all other FEE64s <<1%
      See attachment #5

09.54.51
      biases, SSD1 and 2 over 2 uA each now -  attachment #6

11:20
    All  system-wide checks okay
    Merger okay, 3 Mega items / sec
    TapeServer normal, 27 MB/sec
    Biases as attachment #7
    Stats as #8
    Temps as #9
    Histos as #10

14:10
    All system wide checks okay
    Stats #11
    Temps #12
    Implants #13
    Leak currents are getting a bit higher #14

15:30
    All system wide checks passed
    Stats attachment  #15
    Temps attachment  #16
    Implants  attachment #17
    Biases / leak currents attachment  #18
    Merger okay, 3 Mega items / sec
    TapeServer okay, writing 27 MB/s

16.12 all online spectra zero'd

16.31 stat & rate spectra - attachments 19-22
      1.8.L spectra - attachments 23 & 24
      aida03 pulser peak 57 ch FWHM
      1.8.H spectra - attachments 25 & 26
      NewMerger & TapeServer - attachments 27 & 28

18.29

     system wide checks all okay
     FEE temperatures normal (attachment 29)
     Leakage currents okay and recorded to spreadsheet (attachment 30)
     Good event statistics okay (attachment 31)
     Merger running at 3M items/sec
     Tape server running at 25MB/sec

20.25
     system wide checks all okay
     FEE temperatures normal (attachment 32)
     Leakage currents okay and recorded to spreadsheet (attachment 33)
     Good event statistics okay (attachment 34)
     Merger running at 3M items/sec
     Tape server running at 26MB/sec

as of 20.39 just finished R12_961

21.36 beam is down confirmed by rates histogram (attachment 35), informed others on shift
      was down for maybe 5 minutes is back on at 21.40 (attachment 36)
      think between R12_1004 to R12_1008

22.10
     system wide checks all okay
     FEE temperatures normal (attachment 37)
     Leakage currents okay and recorded to spreadsheet (attachment 38)
     Good event statistics okay (attachment 39)
     Merger running at 3M items/sec
     Tape server running at 26MB/sec

23.03 someone comes to ask if we see an increase in implantation rate as they do their side
      I checked the rates histogram and good events and see nothing that would indicate an increase (attachment 40 and 41)
      FEE temperatures and leakage currents do not seem any different either
      believe they are calling someone about the issue

23.30 leaving now to catch bus but people on night shift have been told how to check on AIDA and know that CG is on call if needed

ASIC settings 2019Oct31-13.24.23
     slow comparator 0xa

BNC PB-5 pulser
     amplitude 1.0V , attenuator x1
     frequency 2Hz
     decay time 1ms

00.00 DAQ momentarily set to NoStorage
      OH changes symbolic link such that AIDA is writing directly to mounted hard-drives ("SecondDrive" and "ThirdDrive")

00.02 DAQ now writing to file again - /media/SecondDrive/TapeData/S480/R12_0

00.30 all system wide checks ok

      FEE64 temperatures ok - attachment 1

      good event statistics ok - attachment 2

      detector bias and leakage currents ok - attachment 3
 
00:43 merger ok - writing at ~ 3 million items/s

      TapeServer ok - writing at ~ 27 Mb/s

      Data forwarding to MBS ok

02:14 all system wide checks ok

      FEE64 temperatures ok - attachment 4

      good event statistics ok - attachment 5

      detector bias and leakage currents ok - attachment 6

02:17 Merger ok  ~ 2.7 million items/s

      TapeServer ok  ~ 27 Mb/s

      Data forwarding to MBS ok

02:18 currently writing to file /media/SecondDrive/TapeData/S480/R12_110

02:57 attachments 7 & 8 - high energy channel spectra

      attachment 9 - hit rate spectra

04:21  FEE64 temperatures ok - attachment 10

      good event statistics ok - attachment 11

      detector bias and leakage currents ok - attachment 12

      system wide checks ok - except WR decoder status (see attachment 13)

04:26 check ASIC control

04:30 system functions -> select required function -> collect all WhiteRabbit status error counters for baseline
      WR decoder status check now ok

04:50 Merger ok  ~ 3 million items/s

      TapeServer ok  ~ 25 Mb/s

      Data forwarding to MBS ok

04:52 currently writing to file /media/SecondDrive/TapeData/S480/R12_231
 
06:11 all system wide checks ok

      FEE64 temperatures ok - attachment 14

      good event statistics ok - attachment 15

      detector bias and leakage currents ok - attachment 16


06:41 Merger ok  ~ 3.3 million items/s

      TapeServer ok  ~ 25 Mb/s

      Data forwarding to MBS ok

06:42 currently writing to file /media/SecondDrive/TapeData/S480/R12_315

07:25 hit-rate spectra - attachment 17

07:36 low energy channel spectra (1.8.L) - attachments 18 & 19



 


      

ASIC settings 2019Oct31-13.24.23
     slow comparator 0xa

BNC PB-5 pulser
     amplitude 1.0V , attenuator x1
     frequency 2Hz
     decay time 1ms

16:51 Bias and leakage currents ok but starting to increase in DSSD 1 predominantly - attachment 1
      Statistics ok - attachment 2
      FEE temp ok - attachment 3
      System wide checks all ok 
     
16:57 Histograms zeroed

17:17 ASIC control check done

17:40 Layout 1 - attachment 4
      Layouts 3 and 4 - attachments 4 and 5
      Layouts 5 and 6 - attachments 6 and 7

19:06 Earlier in the shift two extra 8TB drives were formatted and mounted
      Named SecondDrive and ThirdDrive
      TapeData folder created on SecondDrive
      Plan is before the end of this shift to move the symbolic link from the filling up drive to the new drive
      Current prediction is drive would otherwise be full by 12:20 tomorrow.
      Playing it safe and switching early

21:57 Bias and leakage ok - attachment 8
      Statistics ok - attachment 9
      FEE Temps ok - attachment 10

8:00 - See previous shift's elog entry.  All good.

9:00
    All system wide checks passed
    Merger okay, 3 Mega items / sec, all nnaida twinkle or stay lit
    Tape Server okay - 27 MB/s
    Histograms of implants look normal, about 5 counts per bin in SSD1 and SSD2 - see attachment #1
    Stats as usual - attachment #2
    Temps normal - attachment #3
    Biases and leaks fine -  attachment #4

Disk usage projection
    Space remaining: ~2 TB
    Fill rate: ~2 GB / 1 minute
    -> 1000 minutes =~ 17 hours

Still gzipping from R6_823

10:13 I noticed that the integer for the TapeServer UI feedbackk has been exceeded.
     	Kbytes Written:  -1986382400	Kbytes/sec:  26816
        Rate is fixed at that value on update.
        However, actual data files are being updated so data has been coming.
        DK and NH consulted and believe the situation is fine.
        We agreed next time the DESPEC team closes a run and starts a new one, they inform DK so he can restart the TapeServer for posterity and peace of mind.

10:25 Now we are on R10 after start and stop the TapeServer.  Problem is resolved.

11:30
      Implants: attachment #5
      Stats: attachment #6
      Biases / leaks: attachment #7
      Temps: attachment #8
      System wide checks performed, situation normal.