ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC, Page 1 of 35

Full | Summary | Threaded | Hide attachments

687 Entries

Goto page 1, 2, 3 ... 33, 34, 35 Next

ID	Date	Author	Subject
19	Thu Jan 24 10:26:09 2019	VP, TD, CA, NH	Start up Merger
1) Click on item "Merger MK2" in top panel This kills any existing Merger existence and loads a new copy. 2) Start (if needed) browser conection to localhost:8115. 3) Click on "NewMerger Control" 4) In NewMerger Control, click "Reload" 5) If MergerState = IDLE, click "SETUP". 6) Wait until state = STOPed 7) If links shown are correct, click "GO" 8) Wait until popup about "Resume Merger" appears and click OK 9) when writing to disk, click "Forward Output to Data"
Attachment 1: merger_screenshot.png

607	Thu Apr 25 22:45:30 2024	Tom, Muneerah, Norah	Over night shift AIDA 26 Fri
01:02 Aida04 was zero not reading had to call Tom to fix it. 02:00 checked all good and attached. Its been running good after that till 7:30 again the same problem happened and Tom fixed it.
Attachment 1: Screenshot_from_2024-04-25_23-42-15.png

Attachment 2: Screenshot_from_2024-04-26_00-05-47.png

Attachment 3: Screenshot_from_2024-04-26_00-05-15.png

Attachment 4: Screenshot_from_2024-04-26_00-04-22.png

Attachment 5: Screenshot_from_2024-04-26_02-00-17.png

Attachment 6: Screenshot_from_2024-04-26_01-58-39.png

Attachment 7: Screenshot_from_2024-04-26_01-58-39.png

Attachment 8: Screenshot_from_2024-04-26_01-57-38.png

Attachment 9: Screenshot_from_2024-04-26_01-57-01.png

145	Thu Mar 12 15:25:08 2020	Thursday, March 12 16:00 to midnight shift	CA, DK, LS
16:30 All system wide checks passed Temps shown in attachment #1 Histos shown in attachment #2 NB: Zoomed in, linear scale Biases shown in attachment #3 Stats shown in attachment #4 Merger rates fine 3 Mega items / sec TapeServer looks happy, 25 MB/s Paddy was asking us to give a rough estimate for the number of implants per spill. I zoomed in on the rates histogram (attachment #2) and it looks like roughly 5 implants per channel in SSD 1 and SSD2. So this is 51282=1280. Note that I don't know the rate window size (e.g., 1 second, 1 spill?) Probably the window does not catch a full spill. This might be an over-estimate because an implant in SSD2 may leave a signal in SSD1. Paddy was getting around 1k or 2k fragments per spill, but to first order it seems consistent. 18:36 Near R9_372 they slightly opened some FRS slits, as there is a belief we may be blocking some of 94Pd. Implant rate seems similar to before, see attachment #5 Biases did not change more than normal, see attachment #6 20:15 All system wide checks passed Temps shown in attachment #7 Stats shown in attachment #8 Biases shown in attchment #9 22:12 All system wide checks okay Histo #10 Bias #11 Stat #12 Temps #13
Attachment 1: daid-12-tempA.png

Attachment 2: daid-12-histosA.png

Attachment 3: daid-12-biasesA.png

Attachment 4: daid-12-histosB.png

Attachment 5: daid-12-biasB.png

Attachment 6: daid-12-tempC.png

Attachment 7: daid-12-statsC.png

Attachment 8: daid-12-biasC.png

Attachment 9: daid-12-histosD.png

Attachment 10: daid-12-biasesD.png

Attachment 11: daid-12-statsD.png

Attachment 12: daid-12-tempsD.png

137	Tue Mar 10 08:48:07 2020	TD, OH, NH, LS, CA, DK, PJW, RP	Tuesday 10 March 08.00-16.00
c 09.00 aida03 drops Histogram enable at DAQ GO NH determined this was due to Options DB corruption and fixed 09.55 DAQ currently running No Storage mode ASIC settings 2019Oct31-13.24.23 (different from the December ones yesterday which experienced corruption) slow comparator 0xa BNC PB-5 pulser amplitude 1.0V , attenuator x1 frequency 2Hz decay time 1ms DSSSD biases & leakage currents OK - attachment 1 FEE64 temps OK - attachment 2 good events statistics OK - attachment 3 system wide checks - attachments 4-11 aida06, 08, 10, 12 re-calibrated OK, all others OK aida03 failed WR decoder status - collect all WR errors for baseline - all FEE64s pass WR decoder status sync all ASIC clocks using ReSync merger & TapeServer OK - attachments 12-14 13.29 DAQ to disk file S480/R6 ASIC settings 2019Oct31-13.24.23 slow comparator 0xa aida01 LEC/MEC fast comparator 0x64, all other FEE64s 0xff 14.57 fast comparator thresholds LEC/MEC changed to 0xff for all FEEs 15.01 FEE temperatures normal, aida1 virtex temperature still slightly over 65 degrees (attachment 15) leakage currents recorded to spreadsheet (attachment 16) good events rate similar to previous, high in DSSD3 and seems to be returning to normal in DSSD1 except in one FEE (attachments 17 and 18) system wide checks OK data rate around 22000 KB per second (attachment 19) as of 15.12 on file R6_80 attachment 20 is total event stats shows events are being implanted attachment 21 and 22 show low energy spectrum left most peak is pulser and rightmost is central noise. middle peak in aida1 attachment 23 and 24 show high energy spectrum, aida4 histogram not being produced unsure why. attachment 25 and 26 show waveforms, only aida3 histogram working 16.00 checked ASIC control, all OK 16.35 spill is now changed to 10s with beam intensity increase by factor of 10. 3000 implants per spill. 16.42 leakage currents recorded to spreadsheet 17.10 system wide checks ok fee64 temperatures ok - attachment 27 detector bias/leakage currents ok - attachment 28 good event statistics ok - attachment 29 17.15 moved slit at S2 - rate drop to try remove some 96Pd 17.20 writing to file R6_166 17.44 merger/tapeserver ok. Data rate ~ 25000 kb/s 18:10 Fine tuning implantation profile Removing 0.25mm Al degrader (60 mg/cm^2) to get 96Pd slightly further in to AIDA. DESPEC is closing the current file, R6_203 was just finished on AIDA on typing this. (Maybe the end of run S480f004_ on DESPEC side but that elog was not updated since 16:40?) Decision based on assumption of 6 GeV 96Pd having a range 1 mm in silicon. 19.16 system wide checks ok good event statistics ok - attachment 30 detector bias/leakage currents ok - attachment 31 fee64 temperatures ok - attachment 32 19.39 TapeServer/Merger ok. Writing to file R6_265. Data rate ~ 25000 kb/s 20.07 1.8.H high energy spectra front and back side (attachments 33 + 34) 20.36 S4 timing change, increased by factor of 2 20.38 Merger/TapeServer ok. Data being forwarded to MBS. 20.38 writing to file R6_308 at rate of ~ 25000 kb/s 21:21 system wide checks ok good event statistics ok - attachment 35 fee64 temperatures ok - attachment 36 detector bias/leakage currents ok - attachment 37 21:57 TapeServer/merger ok data forwarding to MBS ok writing to file R6_368 at rate of ~26000 kb/s 23:10 system wide checks ok good event statistics ok - attachment 38 fee64 temperatures ok - attachment 39 detector bias/leakage currents ok - attachment 40 23:24 TapeServer/merger ok data forwarding to MBS ok writing to file R6_435 at rate of 27000 kb/s 23:42 rate spectra - attachment 41
Attachment 1: 1.png

Attachment 2: 2.png

Attachment 3: 3.png

Attachment 4: 4.png

Attachment 5: 5.png

Attachment 6: 6.png

Attachment 7: 7.png

Attachment 8: 8.png

Attachment 9: 9.png

Attachment 10: 10.png

Attachment 11: 11.png

Attachment 12: 12.png

Attachment 13: 13.png

Attachment 14: 14.png

Attachment 15: 200310_1419_feetemps.png

Attachment 16: 200310_1451_leakcurrents.png

Attachment 17: 200310_1450_goodevents.png

Attachment 18: 200309_1506goodevents.png

Attachment 19: 200309_1510_datarate.png

Attachment 20: 200310_1517_stathistograms.png

Attachment 21: 200310_1517_lowEoddfees.png

Attachment 22: 200310_1522_lowEevevfees.png

Attachment 23: 200310_1523_highEoddfees.png

Attachment 24: 200310_1525_highE_evenfees.png

Attachment 25: 200310_1529_waveformsoddfees.png

Attachment 26: 200310_1530_waveformsevenfees.png

Attachment 27: 200310_1707_temp.png

Attachment 28: 200310_1708_bias.png

Attachment 29: 200320_1708_stats.png

Attachment 30: 200310_1915_stats.png

Attachment 31: 200310_1916_bias.png

Attachment 32: 200310_1919_temp.png

Attachment 33: 200310_2000_18h_odd.png

Attachment 34: 200310_2005_18h_even.png

Attachment 35: 200310_2119_stats.png

Attachment 36: 200310_2119_temp.png

Attachment 37: 200310_2120_bias.png

Attachment 38: 200310_2307_temp.png

Attachment 39: 200310_2308_stats.png

Attachment 40: 200310_2309_bias.png

Attachment 41: 200310_2342_rates.png

200	Sun Mar 14 17:35:05 2021	TD, OH	Sunday 14 March - Pulser Walkthrough
18.01 Pulser walkthrough at end of run S452 file S452/R57_0 ... R57_28 ASIC settings 2019Dec19-16.19.51 DSSSD#1 slow comparator 0xa DSSSD#2 slow comparator 0xa DSSSD#3 slow comparator 0xd BNC PB-5 Pulser Amplitude1.0V Attenuation x1 Frequency 2Hz tau_d 1ms - polarity Delay 250ns, tail pulse BNC PB-5 settings changed by terminal command line (see attachments 1, 2 & 3) using the commands set rep rate 25 set attenuation 5 set amplitude 10 set amplitude 9 : : set amplitude 1 set attenuation 1 set rep rate 2 Example n+n LEC spectrum - see attachment 4 18.27 R57 ends OK file R57_28
Attachment 1: 52.png

Attachment 2: 51.png

Attachment 3: 40.png

Attachment 4: Screenshot_2021-03-14_Spectrum_Browser_aidas-gsi(3).png

298	Thu May 6 16:59:20 2021	TD, OH	Wednesday 6 May
18.09 NH has installed jumpers LK2-4 for all adaptor PCBs per FEE64 rate spectra - attachments 1-4 attachment 4 with BNC PB-5 pulser 10Hz ADC data items stats - attachment 5 1.8.W spectra - attachments 6 & 7 Observe significant reduction in DSSSD/ribbon cable boundary channel rates - status quo ante Tuesday 4 May https://elog.ph.ed.ac.uk/DESPEC/291 ? 1.8.L spectra - attachments 8 & 9 pulser peak width aida01 85 ch FWHM, aida2 295 ch FWHM 19:21 Alpha run started May21/R6 Statistics dominated by aida04 with a rate of 6k System wide checks all ok except: Base Current Difference aida13 fault 0x0 : 0x17 : 23 FPGA Timestamp error counter test result: Passed 15, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Writing to file at ~300kB/s Rate spectra for aida04 shows dominated by first asic - attachment 10 1*L spectra for aida04 asic 1 - attachment 11 20.25 per FEE64 rate spectra - attachment 12 handful of hot channels aida06, 09 & 10 ADC data item stats - attachment 13
Attachment 1: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(4).png

Attachment 2: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(5).png

Attachment 3: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(6).png

Attachment 4: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(7).png

Attachment 5: Screenshot_2021-05-06_Statistics_aidas-gsi(1).png

Attachment 6: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(8).png

Attachment 7: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(9).png

Attachment 8: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi.png

Attachment 9: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(1).png

Attachment 10: 210506_1924_aida04Rate.png

Attachment 11: 210506_1927_1*L.png

Attachment 12: Screenshot_2021-05-06_Spectrum_Browser_aidas-gsi(2).png

Attachment 13: Screenshot_2021-05-06_Statistics_aidas-gsi.png

432	Thu May 12 10:10:51 2022	TD, OH	AIDA data throughput
Attachment 1 - top aida06 Attachment 2 - top aida01 Attachment 3 - top aida-gsi (AIDA server) Attachment 4 - TapeServer Attachment 5 - NewMerger stats block 6 (aida06) Attachment 6 - NewMerger stats block 1 (aida01) Attachment 7 - NewMerger stats block 0 (all FEE64s) Attachment 8 - NewMerger options Attachment 9 - NewMerger link stats Attachment 10 - NewMerger Attachments 11-14 - ADC, pause, resume & correlation scaler data item stats Attacgment 15 - Network traffic
Attachment 1: Screenshot_from_2022-05-12_11-08-34.png

Attachment 2: Screenshot_from_2022-05-12_11-07-44.png

Attachment 3: Screenshot_from_2022-05-12_11-07-14.png

Attachment 4: Screenshot_from_2022-05-12_11-05-53.png

Attachment 5: Screenshot_from_2022-05-12_11-05-40.png

Attachment 6: Screenshot_from_2022-05-12_11-05-18.png

Attachment 7: Screenshot_from_2022-05-12_11-05-09.png

Attachment 8: Screenshot_from_2022-05-12_11-04-46.png

Attachment 9: Screenshot_from_2022-05-12_11-04-22.png

Attachment 10: Screenshot_from_2022-05-12_11-03-49.png

Attachment 11: Screenshot_from_2022-05-12_11-03-37.png

Attachment 12: Screenshot_from_2022-05-12_11-03-28.png

Attachment 13: Screenshot_from_2022-05-12_11-03-13.png

Attachment 14: Screenshot_from_2022-05-12_11-02-58.png

Attachment 15: Screenshot_from_2022-05-12_11-15-56.png

112	Thu Dec 19 13:06:02 2019	TD, NH	AIDA@DESPEC To Do list
FAIR phase 0 DESPEC experiments are scheduled March-May 2020 see https://www.gsi.de/en/work/organisation/scientific_boards/user/beam_time.htm The current (19.12.19) version of the schedule is v22 https://www.gsi.de/fileadmin/beamtime/2020/BTS2020_v022_all.pdf AIDA will used for DESPEC experiments S480, S452, S470 & S460 To be done at GSI - check DSSSD - FEE64 connection using alpha background data collected pre- and post- Dec 19 test (NH) - investigate system noise (TD, NH et al.) - replace aida10 adaptor PCB and/or FEE64 (TD, NH et al.) Other issues requiring the support of Carl, James, Patrick & Vic are in order of our ( = TD + NH ) priority - Carl et al. may have a different view. If so, we should discuss. - ASIC settings / Options DB 'corruption' issues (VFEP, CW et al.) - waveform data (PCS, JL et al.) - FEE64/ASIC sync (PCS, JL et al.) ELOG V3.1.3-unknown
128	Thu Feb 20 16:35:55 2020	TD, NH	Thu 20 February 2020
DSSD#3 (most downstream) was replaced Noted that old DSSD wafer was not sitting properly - detached - in PCB, PCB flexing and/or inadequate epoxy gluing New DSSD#3 - 2998-22 - 1006 um - 100 V - ~4 uA Old Detector removed was 3208-14 Fig 1. HV Control Fig 2. Temps Fig 3. Stats Fig 4. Rates Fig 5-6: Waves Fig 7-8: Pulser Peaks Start alpha run at 17:48, 20FEB20, R1 Slow comparator 0x64 Pulser off Fig 9 : Alpha stats Fig 10: Merger stats Fig 11: Merger main page Fig 12: Timestamp errors in merger console
Attachment 1: hv.png

Attachment 2: temps.png

Attachment 3: stats.png

Attachment 4: rates.png

Attachment 5: waves_even.png

Attachment 6: waves_odd.png

Attachment 7: pulser_even.png

Attachment 8: pulser_odd.png

Attachment 9: alpha_stats.png

Attachment 10: merger.png

Attachment 11: merger_stats.png

Attachment 12: merger_errors.png

130	Fri Feb 21 09:39:38 2020	TD, NH	Friday 21 February
Attachment 1 - layout 2 - stat spectra Attachment 2 - detector biases & leakage currents - OK Attachment 3 - FEE64 temperatures - OK Attachments 4-7 - TapeServer, Merger, Merger Statistics, good event statistics - OK 10:40 ASIC check load x2 13.12 DAQ stopped c. 10.50 unable to connect messages for multiple FEE64s After lunch powwer-cycled FEE64s and restarted DAQ aida03 crashed (see https://elog.ph.ed.ac.uk/DESPEC/131 ) and rebooted by issuing reboot command as root Data file 20FEB20/R1 ASIC settings 2019Oct31-13.24.23 slow comparator 0xa -> 0x64 BNC PB-5 pulser OFF continue alpha background run
Attachment 1: 1.png

Attachment 2: 2.png

Attachment 3: 3.png

Attachment 4: 4.png

Attachment 5: 5.png

Attachment 6: 6.png

Attachment 7: 7.png

131	Fri Feb 21 12:16:06 2020	TD, NH	Report - high - unusual FEE64 crash during startup

Attachment 1: ttyUSB4
06/15:20:21\| ISOL Version 1.00 Date 9th January 2017 06/15:20:21\| Flash base address=FC000000 06/15:20:21\| Set Flash to ASync Mode 06/15:20:21\| XST_SUCCESS 06/15:20:21\| Finished copying zImage to RAM 06/15:20:21\| 06/15:20:21\| Found 0 errors checking kernel image 06/15:20:22\|VHDL version number 0X12110103 06/15:20:22\| Based on AIDA Bootloader version number 1.2.0 -- 16th August 2012 06/15:20:22\| Starting LMK 3200 setup 06/15:20:22\| 06/15:20:22\| Setting LMK03200 to standard clock settings -- External Clock 23Nov15 06/15:20:22\| .... SPI Base Address=0x81400000 06/15:20:22\| clk_control_reg=0x4 06/15:20:22\|Next step is SPIconfig 06/15:20:23\| Control 32(0x81400000)=0x180 06/15:20:23\| SlaveSel(0x81400000)=0x3 06/15:20:23\| Ctrl(0x81400000)=0xE6 06/15:20:23\| Ctrl(0x81400000)=0x86 06/15:20:23\|SPIconfig done now to set up the LMK3200 registers 06/15:20:23\|LMK #0 : regInit[0]=0x80000000 06/15:20:23\|LMK #0 : regInit[1]=0x10070600 06/15:20:23\|LMK #0 : regInit[2]=0x60601 06/15:20:23\|LMK #0 : regInit[3]=0x60602 06/15:20:23\|LMK #0 : regInit[4]=0x60603 06/15:20:23\|LMK #0 : regInit[5]=0x70624 06/15:20:23\|LMK #0 : regInit[6]=0x70605 06/15:20:23\|LMK #0 : regInit[7]=0x70606 06/15:20:23\|LMK #0 : regInit[8]=0x70627 06/15:20:23\|LMK #0 : regInit[9]=0x10000908 06/15:20:23\|LMK #0 : regInit[10]=0xA0022A09 06/15:20:23\|LMK #0 : regInit[11]=0x82800B 06/15:20:23\|LMK #0 : regInit[12]=0x28C800D 06/15:20:23\|LMK #0 : regInit[13]=0x830020E 06/15:20:23\|LMK #0 : regInit[14]=0xC800180F 06/15:20:23\| Calibrate completed at 942 counts 06/15:20:23\| Setting Clock Control =0x0000000B, to set GOE and sync bit 06/15:20:23\| Ctrl @ SPIstop (0x81400000)=0x186 06/15:20:23\| 0 delay setup completed at 0 counts 06/15:20:23\| Finished Clock setup LMK03200 06/15:20:23\| completed LMK 3200 setup 06/15:20:23\| Loaded all four ASICs with default settings 06/15:20:23\| Setting the ADCs into calibration mode 06/15:20:23\| 06/15:20:23\| Control 32(0x81400400)=0x180 06/15:20:24\| SlaveSel(0x81400400)=0xFF 06/15:20:24\| Ctrl(0x81400400)=0xE6 06/15:20:24\| Ctrl(0x81400400)=0x86 06/15:20:24\| Init : Config of AD9252 SPI ok 06/15:20:24\| 06/15:20:24\| Ctrl @ SPIstop (0x81400400)=0x186ADCs initialised 06/15:20:24\| ADCs calibrated 06/15:20:24\| 06/15:20:24\| Control 32(0x81400400)=0x186 06/15:20:24\| SlaveSel(0x81400400)=0xFF 06/15:20:24\| Ctrl(0x81400400)=0xE6 06/15:20:24\| Ctrl(0x81400400)=0x86Config of AD9252 SPI ok 06/15:20:24\| 06/15:20:24\| Ctrl @ SPIstop (0x81400400)=0x186Jumping to kernel simpleboot... 06/15:20:24\| 06/15:20:24\| zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0) 06/15:20:24\| Allocating 0x3b78cc bytes for kernel ... 06/15:20:24\| gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes 06/15:20:27\| 06/15:20:27\| Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M 06/15:20:34\| Finalizing device tree... flat tree at 0xbd1300 06/15:20:34\| Probing IIC bus for MAC... MAC address = 0xd8 0x80 0x39 0x41 0xd8 0x21 06/15:20:34\|Using Xilinx Virtex440 machine description 06/15:20:34\|Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011 06/15:20:34\|Zone PFN ranges: 06/15:20:34\| DMA 0x00000000 -> 0x00007000 06/15:20:34\| Normal 0x00007000 -> 0x00007000 06/15:20:34\|Movable zone start PFN for each node 06/15:20:34\|early_node_map[1] active PFN ranges 06/15:20:34\| 0: 0x00000000 -> 0x00007000 06/15:20:34\|MMU: Allocated 1088 bytes of context maps for 255 contexts 06/15:20:35\|Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448 06/15:20:35\|Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M 06/15:20:35\|PID hash table entries: 512 (order: 9, 2048 bytes) 06/15:20:35\|Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 06/15:20:35\|Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 06/15:20:35\|Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init) 06/15:20:35\|Kernel virtual memory layout: 06/15:20:35\| * 0xffffe000..0xfffff000 : fixmap 06/15:20:35\| * 0xfde00000..0xfe000000 : consistent mem 06/15:20:35\| * 0xfde00000..0xfde00000 : early ioremap 06/15:20:35\| * 0xd1000000..0xfde00000 : vmalloc & ioremap 06/15:20:35\|NR_IRQS:512 06/15:20:35\|clocksource: timebase mult[a00000] shift[22] registered 06/15:20:35\|Console: colour dummy device 80x25 06/15:20:35\|Mount-cache hash table entries: 512 06/15:20:35\|NET: Registered protocol family 16 06/15:20:35\|PCI: Probing PCI hardware 06/15:20:35\|bio: create slab <bio-0> at 0 06/15:20:35\|NET: Registered protocol family 2 06/15:20:35\|IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 06/15:20:36\|TCP established hash table entries: 4096 (order: 3, 32768 bytes) 06/15:20:36\|TCP bind hash table entries: 4096 (order: 2, 16384 bytes) 06/15:20:36\|TCP: Hash tables configured (established 4096 bind 4096) 06/15:20:36\|TCP reno registered 06/15:20:36\|NET: Registered protocol family 1 06/15:20:36\|ROMFS MTD (C) 2007 Red Hat, Inc. 06/15:20:36\|msgmni has been set to 214 06/15:20:36\|io scheduler noop registered 06/15:20:36\|io scheduler anticipatory registered 06/15:20:36\|io scheduler deadline registered 06/15:20:36\|io scheduler cfq registered (default) 06/15:20:36\|Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 06/15:20:36\|83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550 06/15:20:36\|console [ttyS0] enabled 06/15:20:36\|brd: module loaded 06/15:20:36\|loop: module loaded 06/15:20:36\|Device Tree Probing 'ethernet' 06/15:20:36\|xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:d8:21 06/15:20:36\|xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode. 06/15:20:36\|XLlTemac: DCR address: 0x80 06/15:20:36\|XLlTemac: buffer descriptor size: 32768 (0x8000) 06/15:20:36\|XLlTemac: Allocating DMA descriptors with kmalloc 06/15:20:37\|XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000 06/15:20:37\|XTemac: PHY detected at address 7. 06/15:20:37\|xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17 06/15:20:37\|fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank 06/15:20:37\| Intel/Sharp Extended Query Table at 0x010A 06/15:20:37\| Intel/Sharp Extended Query Table at 0x010A 06/15:20:37\| Intel/Sharp Extended Query Table at 0x010A 06/15:20:37\| Intel/Sharp Extended Query Table at 0x010A 06/15:20:37\| Intel/Sharp Extended Query Table at 0x010A 06/15:20:37\| Intel/Sharp Extended Query Table at 0x010A 06/15:20:37\|Using buffer write method 06/15:20:37\|cfi_cmdset_0001: Erase suspend on write enabled 06/15:20:37\|cmdlinepart partition parsing not available 06/15:20:37\|RedBoot partition parsing not available 06/15:20:37\|Creating 5 MTD partitions on "fc000000.flash": 06/15:20:37\|0x000000000000-0x000000500000 : "golden_firmware" 06/15:20:37\|0x000000500000-0x000000800000 : "golden_kernel" 06/15:20:37\|0x000000800000-0x000000d00000 : "user_firmware" 06/15:20:37\|0x000000d00000-0x000000fe0000 : "user_kernel" 06/15:20:37\|0x000000fe0000-0x000001000000 : "env_variables" 06/15:20:38\|xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20 06/15:20:38\|SPI: XIlinx spi: bus number now 32766 06/15:20:38\|xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21 06/15:20:38\|SPI: XIlinx spi: bus number now 32765 06/15:20:38\|mice: PS/2 mouse device common for all mice 06/15:20:38\|Device Tree Probing 'i2c' 06/15:20:38\| #0 at 0x81600000 mapped to 0xD1030000, irq=22 06/15:20:38\|at24 0-0050: 1024 byte 24c08 EEPROM (writable) 06/15:20:38\|TCP cubic registered 06/15:20:38\|NET: Registered protocol family 17 06/15:20:38\|RPC: Registered udp transport module. 06/15:20:38\|RPC: Registered tcp transport module. 06/15:20:38\|eth0: XLlTemac: Options: 0x3fa 06/15:20:39\|eth0: XLlTemac: allocating interrupt 19 for dma mode tx. 06/15:20:39\|eth0: XLlTemac: allocating interrupt 18 for dma mode rx. 06/15:20:39\|eth0: XLlTemac: speed set to 1000Mb/s 06/15:20:41\|eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4 06/15:20:41\|eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254 06/15:20:41\|Sending DHCP requests ., OK 06/15:20:42\|IP-Config: Got DHCP answer from 192.168.11.99, my address is 192.168.11.3 06/15:20:42\|IP-Config: Complete: 06/15:20:42\| device=eth0, addr=192.168.11.3, mask=255.255.255.0, gw=255.255.255.255, 06/15:20:42\| host=aida03, domain=dl.ac.uk, nis-domain=nuclear.physics, 06/15:20:42\| bootserver=192.168.11.99, rootserver=192.168.11.99, rootpath=/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida03 06/15:20:42\|Looking up port of RPC 100003/2 on 192.168.11.99 06/15:20:42\|Looking up port of RPC 100005/1 on 192.168.11.99 06/15:20:42\|VFS: Mounted root (nfs filesystem) on device 0:12. 06/15:20:43\|Freeing unused kernel memory: 168k init 06/15:20:43\| INIT: version 2.86 booting 06/15:20:43\|Starting sysinit... 06/15:20:44\| Welcome to DENX & STFC Daresbury Embedded Linux Environment 06/15:20:45\| Press 'I' to enter interactive startup. 06/15:20:45\|Setting clock (utc): Thu Sep 6 14:17:26 BST 2018 [ OK ] 06/15:20:46\|Building the cache [ OK ] 06/15:20:46\|Setting hostname aida03: [ OK ] 06/15:20:48\|Mounting local filesystems: [ OK ] 06/15:20:49\|Enabling /etc/fstab swaps: [ OK ] 06/15:20:52\|Finishing sysinit... 06/15:20:53\| INIT: Entering runlevel: 3 06/15:20:55\|Entering non-interactive startup 06/15:20:56\|FATAL: Module ipv6 not found. 06/15:20:57\|Bringing up loopback interface: [ OK ] 06/15:20:59\|FATAL: Module ipv6 not found. 06/15:20:59\|Starting system logger: [ OK ] 06/15:21:00\|Starting kernel logger: [ OK ] 06/15:21:00\|Starting rpcbind: [ OK ] 06/15:21:08\|Mounting NFS filesystems: [ OK ] 06/15:21:12\|Mounting other filesystems: [ OK ] 06/15:21:15\|Starting xinetd: [ OK ] 06/15:21:17\|Starting midas: Starting MIDAS Data Acquisition for aida03 06/15:21:18\|xaida: device parameters: base=0x81000000 size=0x200000 06/15:21:24\|Trying to free nonexistent resource <0000000081000000-00000000811fffff> 06/15:21:24\|xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000 06/15:21:24\|xaida: driver assigned major number 254 06/15:21:24\|Trying to free nonexistent resource <0000000007000000-0000000007ffffff> 06/15:21:31\|AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000 06/15:21:31\|AIDAMEM: aidamem: driver assigned major number 253 06/15:21:31\|System identified is CPU ppc; Platform is unix; OS is Linux and Version is 2.6.31 06/15:21:38\|Environment selected is CPU ppc; Platform unix; OS Linux and Operating System linux-ppc_4xx 06/15:21:38\|MIDASBASE = /MIDAS and MIDAS_LIBRARY = /MIDAS/TclHttpd/linux-ppc_4xx 06/15:21:38\|PATH = /MIDAS/bin_linux-ppc_4xx:/MIDAS/TclHttpd/linux-ppc_4xx:/MIDAS/linux-ppc_4xx/bin:/MIDAS/linux-ppc_4xx/bin:/sbin:/usr/sbin:/bin:/usr/bin 06/15:21:38\|Computer Name = aida03; Temp Directory = /tmp/tcl361 06/15:21:42\|package limit is not available: can't find package limit 06/15:21:45\|Running with default file descriptor limit 06/15:21:45\|package setuid is not available: can't find package setuid 06/15:21:46\|Running as user 0 group 0 06/15:21:46\| 06/15:21:47\|AIDA Data Acquisition Program Release 8_57.260418 starting 06/15:21:47\| 06/15:21:47\|Built without pthreads 06/15:21:47\| 06/15:21:47\|xaida: open: 06/15:21:48\|CreatinAIDAMEM: aidamem_open: 06/15:21:48\|g NetVars 06/15:21:48\|Output buffer length = 65504; format option = 4; transfer option = 3 06/15:21:48\|EB transfer option = 3 06/15:21:48\|NetVars created and initialised 06/15:21:48\|Statistics thread starting 06/15:21:48\|Statistics thread created 06/15:21:48\|Stat/Rate creation thread starting 06/15:21:48\|Data Acquisition task has PID 375 06/15:21:48\|Stat/Rate creation thread created 06/15:21:48\|Hit/Rate creation thread starting 06/15:21:48\|Hit/Rate creation thread created 06/15:21:48\|AIDA Heartbeat thread starting 06/15:21:48\|Heartbeat thread created 06/15:21:48\|Installing signal handlers 06/15:21:48\|Done 06/15:21:48\|ModuleNum = 0 06/15:21:48\|Aida Initialise complete. AidaExecV8_57: Build 260418. HDL version : 12110103 06/15:21:48\|Spectra table initialised 06/15:21:48\|AIDA Data Acquisition now all ready to start 06/15:21:48\|SIGBUS, SIGSEGV and SIGPIPE traps setup 06/15:21:48\|/debug user "debug" password "qy oblg2zuiw" 06/15:21:55\|httpd started on port 8015 06/15:21:55\| 06/15:21:55\|Cannot use /MIDAS/config/TclHttpd/aida03@8015/startup.tcl 06/15:21:56\|Custom startup from /MIDAS/config/TclHttpd/aida03/startup.tcl 06/15:21:56\|XAIDA Access package 1.0 06/15:21:57\|/XAIDAAccessServer 06/15:21:57\|XAD9252 Access package 1.0 06/15:21:57\|/XAD9252AccessServer 06/15:21:58\|/DataBaseAccessServer 06/15:21:58\|[ OK ] 06/15:21:58\|/NetVarService 06/15:21:58\|/SigTaskService 06/15:21:58\|Loaded MemSasAccess 06/15:21:58\|/SpectrumService 06/15:21:58\|loading tcl/AIDARunControl.tcl for namespace :: 06/15:21:59\|/DataAcquisitionControlServer 06/15:21:59\| 06/15:21:59\|DefineMessage unknown 06/15:21:59\|DENX ELDK version 4.2 build 2008-04-01 06/15:21:59\|Linux 2.6.31 on a ppc 06/15:21:59\| 06/15:21:59\|aida03 login: Run Control Server Implementation for AIDA 06/15:21:59\|RunControlServer loaded 06/15:21:59\|loading Html/RunControl/implementation.tcl 06/15:21:59\|RunControl loaded 06/15:22:00\|loading Html/AIDA/RunControl/implementation.tcl for namespace :: 06/15:22:00\|ReadRegister failed: Name=NetVar.EXEC.ID; Code= 0x10004; Info= Register name does not exist 06/15:22:00\|created SigTask registers 0 0 0 0 06/15:22:00\|Created UI registers 06/15:22:00\|EXPERIMENTS/AIDA/Options/aida03 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:01\|EXPERIMENTS/AIDA/Options/aida03 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:01\|EXPERIMENTS/AIDA/Options/aida03 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:02\|EXPERIMENTS/AIDA/Options/aida03 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:02\|EXPERIMENTS/AIDA/Options/aida03 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:02\|EXPERIMENTS/AIDA/Options/aida03 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:02\|EXPERIMENTS/AIDA/Options/aida03 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:03\|EXPERIMENTS/AIDA/Options/aida03 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:03\|EXPERIMENTS/AIDA/Options/aida03 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:03\|EXPERIMENTS/AIDA/Options/aida03 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:03\|EXPERIMENTS/AIDA/Options/aida03 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:04\|EXPERIMENTS/AIDA/Options/aida03 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:04\|EXPERIMENTS/AIDA/Options/aida03 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:04\|EXPERIMENTS/AIDA/Options/aida03 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:04\|EXPERIMENTS/AIDA/Options/aida03 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:05\|EXPERIMENTS/AIDA/Options/aida03 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:05\|EXPERIMENTS/AIDA/Options/aida03 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:05\|EXPERIMENTS/AIDA/Options/aida03 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:05\|EXPERIMENTS/AIDA/Options/aida03 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:06\|EXPERIMENTS/AIDA/Options/aida03 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:06\|EXPERIMENTS/AIDA/Options/aida03 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:06\|EXPERIMENTS/AIDA/Options/aida03 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:06\|EXPERIMENTS/AIDA/Options/aida03 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:07\|EXPERIMENTS/AIDA/Options/aida03 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:07\|EXPERIMENTS/AIDA/Options/aida03 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/aida03/CONTENTS": permission denied 06/15:22:07\|AIDA RunControl loaded 06/15:22:07\|Completed custom startup from /MIDAS/TclHttpd/Html/AIDA/RunControl/stats.defn.tcl 06/15:22:07\| 06/16:01:02\| ISOL Version 1.00 Date 9th January 2017 06/16:01:02\| Flash base address=FC000000 06/16:01:02\| Set Flash to ASync Mode 06/16:01:02\| XST_SUCCESS 06/16:01:02\| Finished copying zImage to RAM 06/16:01:02\| 06/16:01:02\| Found 0 errors checking kernel image 06/16:01:03\|VHDL version number 0X12110103 06/16:01:03\| Based on AIDA Bootloader version number 1.2.0 -- 16th August 2012 06/16:01:04\| Starting LMK 3200 setup 06/16:01:04\| ... 127179 more lines ...
426	Mon May 9 08:36:23 2022	TD, NH	Monday 9 May
09.32 Re-start AIDA Attachments 1 & 2 1.8.W spectra 20us FSR Attachments 3 & 4 1.8.L spectra aida10 98ch FWHM aida06 384 ch FWHM Attachment 5 per FEE64 rate spectra Attachments 6-13 system wide checks - all OK Attachment 14 ADC data item stats n+n FEE64s c. 250k -> c. 370k aida01, 7 & 12 c. 200-400k Attachment 15 FEE64 temps OK Attachment 16 DSSD bias & leakage current OK Attachment 17 per FEE64 sys console status summary 10.15 Move triPlast Lemo-00 cabling away from aida02 DSSSD-adaptor PCB ribbon cable ASIC check load Attachments 18 ADC data item stats no change to n+n FEE64s, very high p+n FEE64s now at lower rates Attachments 19 & 20 1.8.W spectra 20us FSR 18.27 all ADC data rates very high aida05, asic #1 is again producing HEC data aida14, asic #2 producing very little data Attachments 23 & 24 1.8.W spectra 20us FSR Attachments 25 & 26 1.8.L spectra aida10 165ch FWHM Attachment 27 per FEE64 rate spectra Attachment 28 ADC data item stats Attachment 29 FEE64 temps OK Attachment 30 DSSD bias & leakage current OK Attachments 21 & 22 1.8.L spectra aida10 65ch FWHM aida06 394ch FWHM Attachment 31 Rate with threesholds at 0x64 14.00 Check 3x IC RF signals are not source of extrinsic source (c. 2MHz & c. 100kHz) observed. NT switches off all 3x RF signals - no change. 14.30 Replace FEE64 aida05 old d8:80:39:41:d7:cc -> d8:80:39:41:b4:0b old dhcpd.conf file backed up
Attachment 1: Screenshot_from_2022-05-09_09-58-10.png

Attachment 2: Screenshot_from_2022-05-09_09-56-53.png

Attachment 3: Screenshot_from_2022-05-09_09-54-56.png

Attachment 4: Screenshot_from_2022-05-09_09-53-43.png

Attachment 5: Screenshot_from_2022-05-09_09-51-41.png

Attachment 6: Screenshot_from_2022-05-09_09-50-11.png

Attachment 7: Screenshot_from_2022-05-09_09-50-07.png

Attachment 8: Screenshot_from_2022-05-09_09-50-02.png

Attachment 9: Screenshot_from_2022-05-09_09-48-13.png

Attachment 10: Screenshot_from_2022-05-09_09-48-06.png

Attachment 11: Screenshot_from_2022-05-09_09-48-00.png

Attachment 12: Screenshot_from_2022-05-09_09-47-50.png

Attachment 13: Screenshot_from_2022-05-09_09-47-27.png

Attachment 14: Screenshot_from_2022-05-09_09-47-21.png

Attachment 15: Screenshot_from_2022-05-09_09-47-12.png

Attachment 16: Screenshot_from_2022-05-09_09-47-00.png

Attachment 17: Screenshot_from_2022-05-09_09-36-29.png

Attachment 18: Screenshot_from_2022-05-09_10-16-16.png

Attachment 19: Screenshot_from_2022-05-09_10-17-40.png

Attachment 20: Screenshot_from_2022-05-09_10-17-09.png

Attachment 21: Screenshot_from_2022-05-09_10-32-52.png

Attachment 22: Screenshot_from_2022-05-09_10-31-48.png

Attachment 23: Screenshot_from_2022-05-09_18-16-39.png

Attachment 24: Screenshot_from_2022-05-09_18-16-01.png

Attachment 25: Screenshot_from_2022-05-09_18-15-32.png

Attachment 26: Screenshot_from_2022-05-09_18-14-56.png

Attachment 27: Screenshot_from_2022-05-09_18-13-43.png

Attachment 28: Screenshot_from_2022-05-09_18-13-26.png

Attachment 29: Screenshot_from_2022-05-09_18-13-16.png

Attachment 30: Screenshot_from_2022-05-09_18-13-03.png

Attachment 31: AnyDeskMSI_2022-05-09_21-45-12.png

583	Sat Apr 20 17:52:27 2024	TD, NH	Saturday 20 April contd.
Note 40kBq 60Co source placed on bottom surface of snout centred on bPlas detectors and DSSSDs 18.50 Primary beam 750MeV/u Er to S4 Primary beam stopped by flange (5cm s/steel in position upstream of implantation stack) Observe c. 2MeV dE peak in AIDA DSSSD#1 and DSSSD#2 using MIDASsort online analysis - attachment 1 21.50 Primary beam 1000MeV/u Er to S4 - attachment 2 per DSSSD e_front versus e_back, 20keV/channel DSSSD #1 x & y -axis projections 10.50 Overnight stats - attachment 3 Primary beam ? per DSSSD e_front versus e_back, 20keV/channel DSSSD #1 x & y -axis projections note multiple dE peaks observed in both DSSSDs
Attachment 1: Screenshot_from_2024-04-20_18-51-53.png

Attachment 2: Screenshot_from_2024-04-20_21-52-08.png

Attachment 3: Screenshot_from_2024-04-21_10-52-19.png

623	Tue Apr 30 09:06:45 2024	TD, NH	Tuesday 30 April
10.00 DSSSD bias & leakasge current - Grafana - attachments 1-2 FEE64 temperatures OK - attachment 3 ADC data item stats - attachment 4 9/16 FEE64s < 20k per FEE64 Rate spectra - attachment 5 Merger etc - attachments 6-7 aida02, aida04 inactive 11.20 DAQ restarted aida02 and aida04 now producing data 11.30 analysis data file R22_313 all deadtimes <1% no timewarps HEC data item rate 560Hz (all from one channel of aida08 asic #3) aida03 & aida04 MBS rates c. 24kHz 14.32 FEE64 temperatures OK ADC data item stats OK all FEE64s producing data 14.43 all histograms & stats zero'd [NH checks here] 21.26 aida04 stopped forwarding to merger the "quick fix" (stop merger, rerun) worked MBS is having huge issues on DESPEC side, AIDA not included Decide to stop taking data to disk for now (no storage mode on) Keeping running (incl. to AIDA FDR MBS) just to get an idea of stability System Wide Checks clocks PASSED ADC IGNORED WR: Base Current Difference aida02 fault 0xe4d8 : 0x65c0 : -32536 aida03 fault 0x2371 : 0x2380 : 15 aida04 fault 0xa210 : 0xaf58 : 3400 aida06 fault 0x3624 : 0x3626 : 2 White Rabbit error counter test result: Passed 12, Failed 4 FPGA: Base Current Difference aida02 fault 0xaa3b : 0xc455 : 6682 aida04 fault 0x5a4 : 0x6ba : 278 aida06 fault 0x0 : 0x1 : 1 FPGA Timestamp error counter test result: Passed 13, Failed 3 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Module aida04 LMK PLL channel 1 lock transition counter has incremented Module aida04 LMK PLL channel 2 lock transition counter has incremented PLL lock counter test result: Passed 15, Failed 1 Baselines reset 22.50 FEE64 temps ok merger ok all links active ADC data item stats ok
Attachment 1: Screenshot_from_2024-04-30_10-05-08.png

Attachment 2: Screenshot_from_2024-04-30_10-05-37.png

Attachment 3: Screenshot_from_2024-04-30_10-01-32.png

Attachment 4: Screenshot_from_2024-04-30_10-02-03.png

Attachment 5: Screenshot_from_2024-04-30_10-03-26.png

Attachment 6: Screenshot_from_2024-04-30_10-03-58.png

Attachment 7: R22_313
* TDR format 3.3.0 analyser - TD - May 2021 * ERROR: READ I/O error: 5002 blocks: 32000 ADC data format: 246802750 ( 787077.4 Hz) Other data format: 15117251 ( 48210.3 Hz) Sample trace data format: 0 ( 0.0 Hz) Undefined format: 0 ( 0.0 Hz) Other data format type: PAUSE: 802 ( 2.6 Hz) RESUME: 802 ( 2.6 Hz) SYNC100: 33168 ( 105.8 Hz) WR48-63: 33168 ( 105.8 Hz) FEE64 disc: 0 ( 0.0 Hz) MBS info: 15049311 ( 47993.7 Hz) Other info: 0 ( 0.0 Hz) ADC data range bit set: 182597 ( 582.3 Hz) Timewarps: ADC: 0 ( 0.0 Hz) PAUSE: 0 ( 0.0 Hz) RESUME: 0 ( 0.0 Hz) SYNC100: 0 ( 0.0 Hz) WR48-63: 0 ( 0.0 Hz) FEE64 disc: 0 ( 0.0 Hz) MBS info: 0 ( 0.0 Hz) Undefined: 0 ( 0.0 Hz) Sample trace: 0 ( 0.0 Hz) * Timestamp elapsed time: 313.569 s FEE elapsed dead time(s) elapsed idle time(s) 0 0.000 0.000 1 0.000 0.000 2 0.000 0.000 3 0.410 0.000 4 0.000 0.000 5 0.208 0.000 6 0.000 0.000 7 1.577 0.000 8 0.000 0.000 9 0.000 0.000 10 1.890 0.000 11 0.000 0.000 12 0.000 0.000 13 0.000 0.000 14 0.000 0.000 15 1.784 0.000 16 0.000 0.000 17 0.000 0.000 18 0.000 0.000 19 0.000 0.000 20 0.000 0.000 21 0.000 0.000 22 0.000 0.000 23 0.000 0.000 24 0.000 0.000 25 0.000 0.000 26 0.000 0.000 27 0.000 0.000 28 0.000 0.000 29 0.000 0.000 30 0.000 0.000 31 0.000 0.000 32 0.000 0.000 * Statistics FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 WR48-63 Disc MBS Other HEC Data 0 4403022 10517 0 0 0 0 556 556 0 9405 0 0 1 4797622 11663 0 0 0 0 607 607 0 10449 0 0 2 9960742 7551016 0 0 0 0 2246 2246 0 7546524 0 0 3 26989916 7491649 0 0 64 64 4294 4294 0 7482933 0 0 4 2737535 758 0 0 0 0 379 379 0 0 0 0 5 21805196 5662 0 0 70 70 2761 2761 0 0 0 0 6 6978804 1886 0 0 0 0 943 943 0 0 0 0 7 53329550 13820 0 0 126 126 6784 6784 0 0 0 182597 8 479454 122 0 0 0 0 61 61 0 0 0 0 9 5592721 1538 0 0 0 0 769 769 0 0 0 0 10 39929583 11138 0 0 441 441 5128 5128 0 0 0 0 11 2351324 636 0 0 0 0 318 318 0 0 0 0 12 5309169 1226 0 0 0 0 613 613 0 0 0 0 13 3913898 1006 0 0 0 0 503 503 0 0 0 0 14 2364855 578 0 0 0 0 289 289 0 0 0 0 15 55859359 14036 0 0 101 101 6917 6917 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 0 0 0 * Timewarps FEE ADC Pause Resume SYNC100 WR48-63 Disc MBS Undefined Samples 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 9 0 0 0 0 0 0 0 0 0 10 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 12 0 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 14 0 0 0 0 0 0 0 0 0 15 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 * Program elapsed time: 32.668s ( 979.553 blocks/s, 61.222 Mb/s)
625	Thu May 2 00:16:22 2024	TD, NH	Thursday 2 May
01.15 FEE64 temperatures OK ADC data item stats aida02 & aida04 no data 6/16 < 20k 10.25 FEE64 temperatures OK ADC data item stats aida02 & aida04 restarted 7/16 < 20k, max 220k aida16 all histograms zero'd 13.20 per p+n FEE64 1.8.L spectra - attachment 1 aida09 pulser peak width 59 ch FWHM FEE64 temperatures OK ADC data item stats aida04 no data 5/16 < 20k, max 332k aida08 14.37 Moved Time Machine delayed scaler from aida04 to aida07 aida04 no data Reset merger etc aida05 no data Reset merger etc All FEEs with data again S4 Ambient Environment: 26.6 C / 30.4% RH / Td=7.8 C 17.26 FEE64 temperatures OK ADC data item stats OK 19.28 FEE64 temperatures OK ADC data item stats aida02 no data - DAQ reset
Attachment 1: Screenshot_from_2024-05-02_13-21-07.png

Attachment 2: Screenshot_from_2024-05-02_13-22-16.png

Attachment 3: Screenshot_from_2024-05-02_13-22-43.png

650	Tue Jun 11 10:03:48 2024	TD, NH	08:00-16:00 Tuesday 10 June
10.57 DSSSD bias & leakage current OK - attachment 1 FEE64 temps OK - attachment 2 ADC, MBS correlation scaler data item stats - attachments 3-4 ADC 9x < 20k, max 243k aida08 ASIC settings aida01 & aida02 - attachments 5-6 ALL system wide checks OK except attachments 7-8 WR timestamps OK - attachment 9 BNC PB-5 settings - attachment 10 per FEE64 Rate spectra - attachment 11 per p+n FEE64 1.8.L spectra - attachment 12 aida09 pulser peak width 57 ch FWHM per FEE64 1.8.H spectra - attachments 13-14 per FEE64 1.8.W spectra - 20us FSR - attachments 15-16 no p+n FEE64 wavefroms - reason unknown Merger, TapeServer etc - attachments 17-18 11.25 Lost control of aida-gsi window system All command terminals lost, could not start new command terminals aida-gsi restart FEE64 power cycle DSSSD bias cycle Note file manager, calculator apps now working as expected 12.11 DAQ starts data file S181/R6 ASIC settings 2024Apr19-15.22.49 BNC PB-5 Pulser Amplitude 10.0V Attenuation x10 Fall time 1ms Frequency 2Hz Polarity + (connected to test + signal daisy chain to all p+n FEE64s) Sync ASIC clocks OK All system wide checks OK except aida02 FPGA/WR decoder - attachments 19-20 per FEE64 1.8.W spectra - 20us FSR - attachments 21-22 12.29 analysis data file S181/R6_9 - attachment 23 max dead time c. 2% (aida08) 15:34 For some reason the AIDA MBS wasn't connecting to the time sorter (or a check stream) [NH] Try to reset the AIDA MBS Due to confusion the AIDA Merger was rebooted too, while the DAQ was running, this broke all the FEEs -> Powecycled Synced ASIC clocks, fixed all waveforms Masked all discriminators All looks ok -> Sending back to MBS and back in DESPEC DAQ
Attachment 1: Screenshot_from_2024-06-11_10-56-57.png

Attachment 2: Screenshot_from_2024-06-11_10-57-13.png

Attachment 3: Screenshot_from_2024-06-11_10-57-29.png

Attachment 4: Screenshot_from_2024-06-11_10-57-44.png

Attachment 5: Screenshot_from_2024-06-11_11-02-06.png

Attachment 6: Screenshot_from_2024-06-11_11-02-12.png

Attachment 7: Screenshot_from_2024-06-11_11-02-29.png

Attachment 8: Screenshot_from_2024-06-11_11-02-33.png

Attachment 9: Screenshot_from_2024-06-11_11-02-57.png

Attachment 10: Screenshot_from_2024-06-11_11-03-07.png

Attachment 11: Screenshot_from_2024-06-11_10-57-57.png

Attachment 12: Screenshot_from_2024-06-11_10-59-40.png

Attachment 13: Screenshot_from_2024-06-11_11-00-40.png

Attachment 14: Screenshot_from_2024-06-11_11-01-11.png

Attachment 15: Screenshot_from_2024-06-11_11-01-27.png

Attachment 16: Screenshot_from_2024-06-11_11-01-52.png

Attachment 17: Screenshot_from_2024-06-11_11-03-24.png

Attachment 18: Screenshot_from_2024-06-11_11-03-33.png

Attachment 19: Screenshot_from_2024-06-11_12-18-20.png

Attachment 20: Screenshot_from_2024-06-11_12-18-15.png

Attachment 21: Screenshot_from_2024-06-11_12-23-35.png

Attachment 22: Screenshot_from_2024-06-11_12-22-13.png

Attachment 23: R6_9
* TDR format 3.3.0 analyser - TD - May 2021 * ERROR: READ I/O error: 5002 blocks: 32000 ADC data format: 258839908 ( 1138557.8 Hz) Other data format: 3080092 ( 13548.4 Hz) Sample trace data format: 0 ( 0.0 Hz) Undefined format: 0 ( 0.0 Hz) Other data format type: PAUSE: 641 ( 2.8 Hz) RESUME: 641 ( 2.8 Hz) SYNC100: 32847 ( 144.5 Hz) WR48-63: 32847 ( 144.5 Hz) FEE64 disc: 0 ( 0.0 Hz) MBS info: 3013116 ( 13253.8 Hz) Other info: 0 ( 0.0 Hz) ADC data range bit set: 428993 ( 1887.0 Hz) Timewarps: ADC: 0 ( 0.0 Hz) PAUSE: 0 ( 0.0 Hz) RESUME: 0 ( 0.0 Hz) SYNC100: 0 ( 0.0 Hz) WR48-63: 0 ( 0.0 Hz) FEE64 disc: 0 ( 0.0 Hz) MBS info: 0 ( 0.0 Hz) Undefined: 0 ( 0.0 Hz) Sample trace: 0 ( 0.0 Hz) * Timestamp elapsed time: 227.340 s FEE elapsed dead time(s) elapsed idle time(s) 0 0.006 0.000 1 0.000 0.000 2 0.000 0.000 3 0.570 0.000 4 0.000 0.000 5 0.059 0.000 6 0.000 0.000 7 4.510 0.000 8 0.000 0.000 9 2.812 0.000 10 0.098 0.000 11 0.000 0.000 12 0.000 0.000 13 0.022 0.000 14 0.000 0.000 15 1.041 0.000 16 0.000 0.000 17 0.000 0.000 18 0.000 0.000 19 0.000 0.000 20 0.000 0.000 21 0.000 0.000 22 0.000 0.000 23 0.000 0.000 24 0.000 0.000 25 0.000 0.000 26 0.000 0.000 27 0.000 0.000 28 0.000 0.000 29 0.000 0.000 30 0.000 0.000 31 0.000 0.000 32 0.000 0.000 * Statistics FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 WR48-63 Disc MBS Other HEC Data 0 8222140 8845 0 0 2 2 1011 1011 0 6819 0 0 1 3606751 920 0 0 0 0 460 460 0 0 0 0 2 10679748 1508816 0 0 0 0 1558 1558 0 1505700 0 0 3 19436638 5222 0 0 115 115 2496 2496 0 0 0 0 4 3900385 924 0 0 0 0 462 462 0 0 0 0 5 15462846 3992 0 0 26 26 1970 1970 0 0 0 0 6 5052319 14939 0 0 0 0 649 649 0 13641 0 0 7 59921630 15444 0 0 211 211 7511 7511 0 0 0 428993 8 6654004 1590 0 0 0 0 795 795 0 0 0 0 9 48245181 1499946 0 0 182 182 6313 6313 0 1486956 0 0 10 16829911 4196 0 0 17 17 2081 2081 0 0 0 0 11 2314011 558 0 0 0 0 279 279 0 0 0 0 12 3820239 906 0 0 0 0 453 453 0 0 0 0 13 11619760 2934 0 0 7 7 1460 1460 0 0 0 0 14 3764196 930 0 0 0 0 465 465 0 0 0 0 15 39310149 9930 0 0 81 81 4884 4884 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 0 0 0 * Timewarps FEE ADC Pause Resume SYNC100 WR48-63 Disc MBS Undefined Samples 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 9 0 0 0 0 0 0 0 0 0 10 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 12 0 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 14 0 0 0 0 0 0 0 0 0 15 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 * Program elapsed time: 29.500s ( 1084.746 blocks/s, 67.797 Mb/s)
675	Wed Dec 11 14:46:21 2024	TD, JB, CC, MP	Mounting of AIDA, bPlast and BB7 for test
Snout assembled for detector position and timing test. The planned test is to use a BGO with a 22-Na source and the implantation stack to characterise the timing and position of back-to-back 511 keV events (proxy for mock beta decay event). The implantation stack is assembled as follows: Upstream ----> AIDA test frame (as a spacer) ----> AIDA DSSSD (3208-3/3208-21/3208-22, Upstream AIDA used in S100 & S181, April 2024) ----> bPlast (Downstream bPlast) ----> BB7 (mounted in test frame connected to AIDA adaptor) ----> Downstream The AIDA DSSSD condition seems to be the same as when it was dismounted after S181 and it, apart from some specks of dust no bond wires appear to be broken to the naked eye. BGO signals appear on the scope with a 22-Na source but the response is quite messy. 17:36 MSL type BB18(DS)-1000 24cm x 8cm DSSSD upstream position within snout using 8x upstream (23") ribbon cables MSL type BB(DS)-1000 positioned downstream of downstream bPlast within snout using 1x downstream (29") ribbon cable. For BB7 'isolated' Right Coupler Kapton PCB replaced by unmodified Right Coupler Kapton PCB.
Attachment 1: 20241211_161837.jpg

Attachment 2: 20241211_161833.jpg

Attachment 3: 20241211_161830.jpg

Attachment 4: 20241211_161820.jpg

569	Tue Apr 9 13:22:41 2024	TD, JB, CC	Continued of 9th of April
Disconnected test - pulser from aida08. Noise conditions improved slightly, probably less pulser events. (Attachments 1 & 2). We recabled the dew point sensor and flow sensor for the water supply interlock to the FEE64s. When we tried to power up the interlock box, the PSU (charging block) LED was blinking indicating an internal power instability. We then plugged each of the sensors out and into the interlock box and found that the flow sensor was the source of the power supply issue. The HDMI cable of aida04 appears to be broken or wobbly, but the signals still look the same after powering up again. The adaptor board was reseated. Pulser peak of test - remeasured the peak in aida02 1.8.L and found the same result as before with 118 channels FWHM c. 95-100 keV FWHM energy resolution. (Attachment 3) bPlast booster boards connected caused dramatic increase in the noise observed in AIDA. Grounding still needs to take place. TO-DO for 10.04 - 11.04: - aida04 asic #1 investigate noise - aida14 asic #1 & asic #2 u/s? replace ASIC mezzanine? - noise optimisation of aida-bplast -- (friday if BB7 also powered).
Attachment 1: Screenshot_from_2024-04-09_14-22-20.png

Attachment 2: Screenshot_from_2024-04-09_14-22-16.png

Attachment 3: Screenshot_from_2024-04-09_17-18-45.png

575	Tue Apr 16 10:49:37 2024	TD, JB, CC	Tuesday 16 April
11.45 DSSSD bias & leakage current OK - attachments 9-10 FEE64 temps OK - attachment 8 except aida02 ASIC temp which is known to be u/s All system wide checks OK except aida02 and aida04 WR decoder/FPGA status errors - attachments 6-7 HDMI cabling disturbed during platform move? WR timestamps OK - attachment 5 ADC data item stats - attachment 4 10/16 < 20k, max 115k per FEE64 Rate spectra - attachments 3 per 1.8.W spectra - 20us FSR - attachments 1-2 11.58 BB7 preamps unplugged. Noise conditions OK. Did not change considerably. 11/16 < 20k (aida09 has 1 hot channel), max 114k Attachments 11-12. 12:34 Detector powered down to bring to safe state to check HDMI cables of aida02 and aida03. 15:06 Reseated aida02 and aida03. No more FPGA timestamp error. See attachment 13-14. Rates and histograms look good for pulser walk through. Test + and test - connected. Currently, Attachment 16-17. Temp OK Attachment 15. Bias OK Attachment 18. Data links aida02 and aida08 missing (?) 16:30 All slow comparator thresholds set to 0x64 for alpha background run during platform freeze. Initial rates and histograms attachment 19 - 20. aida04 noisy in ASIC 1. Temps OK. Attachment 21. MBS disc and tape setup in atttachment 22-23.
Attachment 1: Screenshot_from_2024-04-16_11-49-17.png

Attachment 2: Screenshot_from_2024-04-16_11-48-28.png

Attachment 3: Screenshot_from_2024-04-16_11-47-40.png

Attachment 4: Screenshot_from_2024-04-16_11-46-48.png

Attachment 5: Screenshot_from_2024-04-16_11-46-01.png

Attachment 6: Screenshot_from_2024-04-16_11-45-15.png

Attachment 7: Screenshot_from_2024-04-16_11-44-37.png

Attachment 8: Screenshot_from_2024-04-16_11-44-06.png

Attachment 9: Screenshot_from_2024-04-16_11-51-17.png

Attachment 10: Screenshot_from_2024-04-16_11-50-22.png

Attachment 11: Screenshot_from_2024-04-16_11-58-26.png

Attachment 12: Screenshot_from_2024-04-16_11-58-08.png

Attachment 13: Screenshot_from_2024-04-16_15-04-13.png

Attachment 14: Screenshot_from_2024-04-16_15-04-07.png

Attachment 15: Screenshot_from_2024-04-16_15-06-31.png

Attachment 16: Screenshot_from_2024-04-16_15-06-12.png

Attachment 17: Screenshot_from_2024-04-16_15-05-33.png

Attachment 18: Screenshot_from_2024-04-16_15-08-04.png

Attachment 19: Screenshot_from_2024-04-16_15-10-46.png

Attachment 20: Screenshot_from_2024-04-16_17-17-35.png

Attachment 21: Screenshot_from_2024-04-16_17-17-32.png

Attachment 22: Screenshot_from_2024-04-16_17-14-40.png

Attachment 23: Screenshot_from_2024-04-16_17-17-24.png

Attachment 24: Screenshot_from_2024-04-16_17-17-11.png

564	Mon Apr 8 10:23:16 2024	TD, JB	AIDA Noise optimisation
In the morning we reinstalled FEE64s aida06, aida13, aida07. The rails of the FEE64 boards were found to be incorrect (that of the rails that were used in CARME). After replacing the rails on the abovementioned FEE64s we powercycled AIDA and found the following results in the histograms and statistics. As can be seen in attachement 4, aida16 has a noisy waveform and we are going to investigate this further. When setting the threshold to 0x64 (1 MeV) on the slow comparator threshold we saw that the low energy branch of aida04 was still noisy. (Attachment 6) - Setting the slow comparator threshold to 0x32 (0.5 MeV) introduced noise into aida08, aida16 and substantially more noise in aida04. (Attachment 7) - Setting the slow comparator threshold to 0x14 (0.2 MeV) introduced noise into aida11 and substantially more noise in aida04, aida08, aida16 and aida06. (Attachment 8) - Setting the slow comparator threshold to 0xf (0.15 MeV) introduced more noise into the same aforementioned channels aida04, aida06, aida08, aida11, aida16 (additionally aida02), barring hot strips. (Attachment 9) We covered the end of the snout with a black cloth and this reduced the noise in some of the channels (Attachment 10 and 11). - We covered the end of the snout with two layers of aluminium foil - this produced the same result as covering the snout with the black cloth (Attachment 12, 13, 14 & 15). We resumed after lunch. - Replaced the aida16 adaptor PCB with a spare, and this produced a much more sensible rate and hitpattern in aida16, which could lead us to believe that the aida adapter card was faulty or misaligned. (Attachment 16, 17, 18 & 19). - Placed two LK1 back on the n+n side of both DSSSDs on aida06 and aida02. The noise and rate did not change at all. (Attachment 20 & 21) Pulser tests: - The test + pulser was connected to the p+n sides (top and bottom) at 25 Hz. - After checking the ASIC control 2 times over, the pulser seems to be ok for all p+n channels excluding aida01, aida13 and aida14. (Attachment 23) - The pulser peak width of aida09 1.8.L was found to be c. 55 channels FWHM on uncalibrated scale which corresponds to 35 - 40 keV FWHM in energy resolution. (Attachment 24) - After reseating the adaptor board PCBs we found the same result as before reseating the adaptor boards (Attachment 25). - Connecting the test - pulser to the n+n side we found that most of the ASICs behaved normally which ASIC 1 in aida04 was showing abnormal behaviour. (Attachment 26, 28). The test + pulser loop is still in place. - The pulser peak width of aida02 1.8.L was found to be c. 118 channels FWHM on uncalibrated scale which corresponds to 95 - 100 keV FWHM in energy resolution. (Attachment 27) - We set the thresholds on the n+n side to 0xf and the p+n side to 0xa. Subsequently, we observed improved noise conditions in many of the channels. The still noisy channels are aida01, aida04, aida08. (Attachment 29, 30). This might be because we have introduced an addtional ground loop with the pusler tests, but could also mean that the ground loop that is currently being used is not sufficient or poorly implemented. Summary: - From the pulser test it is clear that aida14 ASICs 1&2 are not in good shape and appear to be faulty. - We managed to improve from 1 aida module in the sub 20 kHz rate range to 6 aida modules in the sub 20 kHz rate range by the end of the tests. - We set the slow comparator thresholds on the n+n side to 0xf and the p+n side to 0xa. Subsequently, we observed improved noise conditions in many of the channels. The still noisy channels are aida01, aida04, aida08. (Attachment 29, 30). This might be because we have introduced an additional ground loop with the pusler tests, but could also mean that the ground loop that is currently being used is not sufficient or poorly implemented.
Attachment 1: Screenshot_from_2024-04-08_11-28-11.png

Attachment 2: Screenshot_from_2024-04-08_11-27-25.png

Attachment 3: Screenshot_from_2024-04-08_11-26-38.png

Attachment 4: Screenshot_from_2024-04-08_11-26-31.png

Attachment 5: Screenshot_from_2024-04-08_11-25-57.png

Attachment 6: Screenshot_from_2024-04-08_11-31-34.png

Attachment 7: Screenshot_from_2024-04-08_11-34-40.png

Attachment 8: Screenshot_from_2024-04-08_11-36-50.png

Attachment 9: Screenshot_from_2024-04-08_11-40-33.png

Attachment 10: Screenshot_from_2024-04-08_11-51-46.png

Attachment 11: Screenshot_from_2024-04-08_11-51-50.png

Attachment 12: Screenshot_from_2024-04-08_12-09-33.png

Attachment 13: Screenshot_from_2024-04-08_12-09-37.png

Attachment 14: Screenshot_from_2024-04-08_12-10-20.png

Attachment 15: Screenshot_from_2024-04-08_12-10-57.png

Attachment 16: Screenshot_from_2024-04-08_15-09-34.png

Attachment 17: Screenshot_from_2024-04-08_15-09-08.png

Attachment 18: Screenshot_from_2024-04-08_14-45-49.png

Attachment 19: Screenshot_from_2024-04-08_14-45-05.png

Attachment 20: Screenshot_from_2024-04-08_14-44-19.png

Attachment 21: Screenshot_from_2024-04-08_14-44-14.png

Attachment 22: Screenshot_from_2024-04-08_16-03-19.png

Attachment 23: Screenshot_from_2024-04-08_16-07-48.png

Attachment 24: Screenshot_from_2024-04-08_16-13-53.png

Attachment 25: Screenshot_from_2024-04-08_16-38-15.png

Attachment 26: Screenshot_from_2024-04-08_16-48-25.png

Attachment 27: Screenshot_from_2024-04-08_16-52-17.png

Attachment 28: Screenshot_from_2024-04-08_16-50-12.png

Attachment 29: Screenshot_from_2024-04-08_17-00-38.png

Attachment 30: Screenshot_from_2024-04-08_16-58-25.png

Goto page 1, 2, 3 ... 33, 34, 35 Next

ELOG V3.1.4-unknown