| |
ID |
Date |
Author |
Subject |
|
|
713
|
Wed Jul 23 15:04:26 2025 |
CC, MP, NK | Test of AIDA05 with BB7 connected to Mesytec but not biased | Attachment1: AIDA05.1.8L when AIDA05 connected, biased at 100 V with not-shielded cables, after the DEGAS platform has been closed, the 2 tiles of BB7 have been connected to the mesytec preamps. BB7 is not biased. The mesytec preamps have been fully connected and supplied but 6/8 black cables are not connected on the other side. 4X and 4Y are connected to the 2 FEBEX cards.
The 2 drain wires of bplast that were hanging on the bottom are now taped to the snout, not making any antena effect anymore.
FWHM: 79 channels (to be compared with the previous elogs between 73 channels and 76 channels)
Conclusion: no significant differences can be observed when BB7 is connected. The tail on the left side of the spectrum in twice as small, most likely because on the now-taped drain wires of bplast |
|
|
714
|
Wed Jul 23 15:56:00 2025 |
CC, MP, NK | Test of AIDA05 with new bias module | Attachment1: AIDA05.1.8L when AIDA05 connected, biased at 101 V with shielded cables. BB7 is still connected but not biased (same configuration as the previous elog). The channel of the CAEN power supply #0 is connected to ASIC08 and biased at 100V. The channel of the CAEN power supply #1 is disconnected but still biased at 100V. AIDA04 (chained to AIDA05) is biased via a shielded cable to an iseg NHQ 246L power supplied, biased at 101 V with 16 uA.
All the outside drain wires of bplast are now taped to the snout.
The red markers of the cursors of the previous test have been left for ease of comparison.
FWHM: 21699-21644 = 55 channels (to be compared with the previous elogs between 73 channels and 79 channels)
Conclusion: a significant improvement can be observed with a cleaner power supply. |
|
|
717
|
Thu Jul 24 13:36:34 2025 |
CC, MP, NK | AIDA05 connected and disconnected compared to AIDA09 | HT cable shielded, HT of upstream AIDA from iseg, HT of downstream AIDA from CAEN. Both channel 0 and 1 of CAEN are on, even though there is just one channel connected. During this test, some parallele tests are being done on BB7 Mesytec. In general, middle tile: detector disconnected from preamps but preamps connected on the other side. Right tile: detector connected to preamps, cable shielded but preamps disconnected on the other side (supplied, one output is plugged). Those conditions may have changed during the test. The BB7 and bplast crates are also being connected to the cupper sheet of AIDA's structure to be grounded, the carton pieces under the crates have been removed.
AIDA05 connected, HT 0V
Attachment 1: AIDA05.1.8L --> FWHM 1907 channels
Attachment 2: AIDA09.1.9L --> FWHM 1467 channels
AIDA05 connected, HT 100V
Attachment 3: AIDA05.1.8L --> FWHM 74 channels
Attachment 4: AIDA09.1.8L --> FWHM 79 channels
Attachment 5: AIDA13.1.8L --> FWHM 250 channels
AIDA05 disconnected, HT 0V (cable between the detector and the adaptor board)
Attachment 6: AIDA05.1.8L --> FWHM 16 channels
AIDA05 disconnected, HT 100V
Attachment 7: AIDA05.1.8L --> FWHM 16 channels
Attachment 8: AIDA09.1.8L --> FWHM 87 channels
Attachment 9: AIDA13.1.8L --> FWHM 234 channels
Attachment 10: AIDA12.1.8L --> FWHM 116 channels (bplast cable side disconnected) to be compared to 117 channels (screenshot forgotten to be saved but tags left 21600 and 21171) --> no effect |
|
|
718
|
Thu Jul 24 15:50:01 2025 |
CC, MP, NK | Check of BB7 impact | HT of upstream AIDA from iseg, HT cable shielded, 100V, 17 uA. HT of downstream AIDA from CAEN, AIDA#0. Both channel 0 and 1 of CAEN are on, even though there is just one channel connected. DEGAS platform closed. The crates of BB7 and bplast have been put to the ground of the AIDA's structure (cupper sheet)
Attachment 1: TEST1: BB7 fully connected = 2 tiles of BB7 have been connected to the mesytec preamps. BB7 is not biased. The mesytec preamps have been fully connected and supplied but 6/8 black cables are not connected on the other side. 4X and 4Y are connected to the 2 FEBEX cards. The cables of BB7 right between the snout and the preamps are shielded.
AIDA05.1.8L --> FWHM 76-80 channels
Attachment 2: TEST2: BB7 fully disconnected
AIDA05.1.8L --> FWHM 71 channels
Attachment 3: TEST3: BB7 fully disconnected, TAMEX crate unbiased, BB7 NIM crate turned off
AIDA05.1.8L --> FWHM 67 channels
Attachment 4: AIDA01.1.0 --> FWHM 171 channels --> same detector, also biased with iseg but bad results |
|
|
574
|
Mon Apr 15 09:23:43 2024 |
CC, JB, HMA, TD | Noise in AIDA when connecting BB7 | 9:40 started up AIDA. TEMP OK. Noise condition same as Saturday. Attachments 1-3.
9:56 BB7 premaps connected but not powered. Attahcment 4.
10:20 BB7 Preamps powered. Attachment 5.
Noise increased marginally, but still 10/16 <20kHz, max 130k.
15.15 per FEE64 Rate spectra - attachment 6
ADC data item stats - attachment 7
increased noise observed - 6/16 < 20k, max 300k
17.10 per FEE64 1.8.W spectra - 20us FSR - attachments 8-9
per FEE64 Rate spectra - attachment 10
ADC data item stats - attachment 11
increased noise observed - 7/16 < 20k, max 180k
20.30 per FEE64 Rate spectra - attachment 12
ADC data item stats - attachment 13
status quo ante - 10/16 < 20k, max 130k
FEE64 power OFF
DSSSD bias OFF
|
|
|
41
|
Tue Apr 2 07:39:44 2019 |
CB, TD, CA | Tuesday 2nd April 2019 | 08:15 beam tuning in progress
08.30 System wide checks
- aida06 global clock failure (check clock status)
- aida02 , aida04, aida06 fail calibration (ADC calibration)
- SYNC error counter ok
- SYNC pulse check ok
- 'collect memory information from FEE64 Linux' still returns scripting error -> will not check again until update
- WR decoder test passes
- good event statistics OK, except aida 09, 10, 11, 12 as yesterday morning (see attach 1)
- FEE temperature OK (see attach 2)
- Detector OK (see attach 3)
- NewMerger. MergerHTTPd, newMerger Terminal, data relay MBS screenshots attached (4,5,6,7)
10:37 Issues with magnets due to the new control system. Beam tuning continues
AIDA continues running OK
- aida06 global clock failure (check clock status)
- aida02 , aida04, aida06 fail calibration (ADC calibration)
- SYNC error counter ok
- SYNC pulse check ok
- WR decoder test passes
- good event statistics OK, except aida 09, 10 (see attach 8). Aida 9 & 12 rates now lower
- FEE temperature OK
- Detector OK
- Merger OK
12:21 Beam start
AIDA continues running OK
- aida06 global clock failure (check clock status)
- aida02 , aida04, aida06 fail calibration (ADC calibration)
- SYNC error counter ok
- SYNC pulse check ok
- WR decoder test passes
-ASIC check load performed
-Writing to file R11 in directory 290319
-histograms zeroed
-good event statistics OK, except aida 09, 10 (attachment 9)
-FEE temperatures ok (attachment 10)
-detector bias ok (attachment 11)
-thick degrader was placed in front of snout during beam operation
12:40 beam stop
TapeServer stopped, file R11_0 in 290319
TapeServer restarted, not writing to file
low energy spectra for aida09 (attachment 12)
high energy spectra for aida09 (attachment 13)
high energy spectra for aida11 (attachment 14)
1D hit patterns (stat) in aida09,10,11,12 (attachment 15)
ASIC control settings used during beam, including thresholds (attachment 16)
14.20 *NOTE degrader setting different from yesterday, silver beam still not observed, just unidentified light ions.
AIDA continues running OK
aida06 global clock failure (check clock status)
aida02 , aida04, aida06 fail calibration (ADC calibration)
SYNC error counter ok
SYNC pulse check ok
WR decoder test passes
14.37 good event statistics OK, except aida 10 (attachment 17)
detector bias ok (attachment 18)
FEE temperatures ok (attachment 19)
14.54 Degrader removed
16:13 AIDA continues running OK
aida06 global clock failure (check clock status)
aida02 , aida04, aida06 fail calibration (ADC calibration)
SYNC error counter ok
SYNC pulse check ok
WR decoder test passes
FEE64 temperatures OK
good event statistics OK, except aida 3, 9, 10 running hot (see attach 18)
17:00 Beam start - no degrader
AIDA running OK
Writing on file R13
Beam is better focused (see attach 19). Appears to be off-centre in the bottom right part of the detector
Rates OK (see attach 20)
DSSD bias/current OK (see attach 21)
17:21 Beam re-centred. Histograms cleared - see attach 22
AIDA continues OK
Run continues
High energy spectra in aida09 (attachment 25)
Beam rate approx 5000 ions/s
Beam being diffused
TapeServer start stop - AIDA writing to file R14 in 290319
17:48 1D hit patterns - beam in process of being diffused (attachment 26)
17:57 leakage current back at 1.465 uA (attachment 27)
18:08 beam stopped
TapeServer stopped and restarted - not writing to file
updated hit patterns from beam diffusing (attachment 28)
aida10, ADC3 high energy spectra (attachment 29)
18.11 calibrating tpc with masks
TapeServer stop/start R16, 290319
18.49 leakage current briefly fluctuating between ~1.2 uA and ~2 uA, but has returned to stability at ~ 1.4 uA
(attachment 30)
18.55 beam stopped for tuning - TapeServer stop/start. Not writing to file.
18.58 leakage current still stable after beam off (attachment 31)
19.10 beam start. TapeServer stop/start writing to file R18 in 290319
19.15 leakage current still ok after beam activation
19.34 fee12 high energy spectra (attachment 32)
20.35 beam stop, tapeserver stopped
histogramming link dropped on aida 12
20.38 beam start. TapeServer start R20
|
|
|
429
|
Wed May 11 19:08:41 2022 |
CB, PP | Wednesday 11th May - evening shift | 20:19 no beam yet.
Statistic check (screenshot attached).
Temperatures OK (screenshot attached).
Bias and leakage currents OK (same screenshot as temps).
All ADC failed calibration. Clock and white rabbit all passed.
22:12 no beam yet.
Statistic check (screenshot attached).
Temperatures OK (screenshot attached).
Bias and leakage currents OK (same screenshot as temps).
All ADC failed calibration. Clock and white rabbit all passed. |
|
|
308
|
Wed May 12 15:03:10 2021 |
CB, OH | Wed 12 16:00-20:00 | 16:00 Shift change
Statistics OK (attach 1)
Temps OK (attach 2)
Bias OK (attach 3)
System wide checks
Clock, ADC - OK
WR
Base Current Difference
aida05 fault 0x36ca : 0x36cb : 1
White Rabbit error counter test result: Passed 15, Failed 1
FPGA
Base Current Difference
aida13 fault 0xa : 0x4b : 65
FPGA Timestamp error counter test result: Passed 15, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 15 5 6 1 1 2 2 3 3 3 6 : 36388
aida02 : 21 10 2 2 2 3 2 2 3 3 6 : 36100
aida03 : 25 5 3 1 0 3 3 2 3 3 6 : 36188
aida04 : 5 2 0 3 2 3 2 3 3 3 6 : 36484
aida05 : 16 6 3 1 2 4 1 3 2 4 6 : 37440
aida06 : 2 2 2 2 2 3 1 3 3 3 6 : 36216
aida07 : 16 9 3 0 3 4 3 2 3 3 6 : 36472
aida08 : 0 7 1 1 2 2 3 3 2 3 6 : 35560
aida09 : 15 7 4 2 2 4 2 3 2 3 6 : 35700
aida10 : 3 7 3 4 1 3 1 4 1 4 6 : 36788
aida11 : 5 1 3 1 1 4 3 3 2 3 6 : 35756
aida12 : 5 5 0 3 2 3 2 4 2 3 6 : 35996
aida13 : 2 5 1 2 2 4 3 3 2 3 6 : 35840
aida14 : 19 5 3 1 1 2 1 3 3 3 6 : 36100
aida15 : 20 6 6 2 1 3 2 2 3 3 6 : 36064
aida16 : 7 9 4 1 3 4 2 3 2 3 6 : 35716
File size change
Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same
FEE : aida01 => Options file size is 1026 Last changed Mon May 10 16:47:51 CEST 2021
FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021
FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021
FEE : aida04 => Options file size is 1014 Last changed Thu Apr 29 14:43:53 CEST 2021
FEE : aida05 => Options file size is 1014 Last changed Thu Apr 29 14:43:55 CEST 2021
FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021
FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021
FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021
FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021
FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021
FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
16:20 Beam is back. Currently on File R1_200
16:43 Beam is being optimised.
17:00 UCESB OK
Stats OK (attach 4)
Temps OK
Bias OK (attach 5)
System-wide checks as before
17:30 Beam rate is quite high (up to 2000 Hz peak on ucesb). Stats still OK
17:52 Started compressing R1_1*
18:00 UCESB ok (attach 5)
Stats OK (attach 6)
Temps OK
Bias OK (attach 7)
System wide checks as before
19:00 UCESB ok (as before)
Stats OK (attach 8)
Temps OK
Bias OK (attach 9)
Merger OK (attach 10)
19:32 UCESB ok
Stats OK (attach 11)
Temps OK (attach 12)
Bias OK (attach 13)
System wide checks as before
19:51 Shift handed over to James S |
|
|
317
|
Fri May 14 14:57:32 2021 |
CB + OH, TD, NH | Friday 14th May 16:00-20:00 | 16:00 Shift taken over from CA
16:00
Temperatures OK. Attach 1.
Upon reloading aida11 first returns "No respose" for all values.
Upon refreshing, aida11 responds but aida 9 returns "No response".
Upon refreshing again, attach 1.
Bias OK. Attach 2.
Statistics OK. Attach 3-7
System-wide checks
Clock OK
ADC - all fail
Base Current Difference
aida01 fault 0xf932 : 0xf933 : 1
aida02 fault 0x62ec : 0x62ed : 1
aida03 fault 0x8679 : 0x867a : 1
aida04 fault 0xf0e4 : 0xf0e5 : 1
aida05 fault 0x9db8 : 0x9dc3 : 11
aida06 fault 0x7f18 : 0x7f19 : 1
aida07 fault 0xdd2c : 0xdd2d : 1
aida08 fault 0x1557 : 0x1558 : 1
White Rabbit error counter test result: Passed 8, Failed 8
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Base Current Difference
aida05 fault 0x0 : 0x3 : 3
FPGA Timestamp error counter test result: Passed 15, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 32 28 25 7 1 4 1 3 2 3 6 : 36112
aida02 : 43 28 29 5 4 2 3 4 1 3 6 : 36092
aida03 : 39 26 28 5 4 3 2 5 1 3 6 : 36428
aida04 : 9 5 21 8 5 4 4 4 2 2 6 : 35292
aida05 : 46 32 26 7 2 2 2 2 2 3 6 : 35768
aida06 : 4 5 16 1 3 4 2 4 1 3 6 : 35352
aida07 : 47 21 25 5 4 3 1 4 1 3 6 : 35604
aida08 : 62 33 32 6 0 2 3 3 3 2 6 : 35520
aida09 : 33 25 28 7 3 5 2 4 1 3 6 : 36140
aida10 : 47 29 22 6 3 2 2 2 2 3 6 : 35716
aida11 : 39 30 29 6 2 3 1 3 2 3 6 : 36124
aida12 : 38 36 20 6 3 2 3 3 3 2 6 : 35448
aida13 : 42 29 24 3 4 2 3 3 3 2 6 : 35440
aida14 : 31 28 18 7 3 3 4 4 2 2 6 : 35228
aida15 : 48 25 30 5 3 2 4 4 2 2 6 : 35272
aida16 : 37 16 28 6 3 3 2 2 2 3 6 : 35796
Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same
FEE : aida01 => Options file size is 1026 Last changed Thu May 13 05:49:42 CEST 2021
FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021
FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021
FEE : aida04 => Options file size is 1014 Last changed Thu Apr 29 14:43:53 CEST 2021
FEE : aida05 => Options file size is 1014 Last changed Thu Apr 29 14:43:55 CEST 2021
FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021
FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021
FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021
FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021
FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021
FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
16:15 Control handed over to OH temporarily.
16:25 AIDA stopped. OH attempts to update Merger. Discriminators off.
16:29 AIDA restart begins.
16:33 AIDA restarted.
16:40 Dead time still very high ~50% in most FEEs.
16:50 Checking effect of threshold on dead time.
16:53 Checking waveform effect on deadtime. DAQ stopped. Turning waveforms on, threshold increased to max. This
*reduces* deadtime to <10%.
Sampling ADCs were disabled (switched off) late Wednesday evening.
17:01 DAQ can be restarted.
17:27 Finished checking effect of threshold on dead time. 120 keV front. 320 keV back.
17:33 Analysis of R5_45 - x strips 0xc - y strips 0x20
17:40 OH hands back control.
Temperature OK - attach 10
Bias OK - attach 11
Stats - attach 12-17
System-wide checks
Clock - all pass
ADC - all pass
WR
Base Current Difference
aida01 fault 0xf932 : 0xf933 : 1
aida02 fault 0x62ec : 0x62ed : 1
aida03 fault 0x8679 : 0x867a : 1
aida04 fault 0xf0e4 : 0xf0e5 : 1
aida05 fault 0x9db8 : 0x9dc3 : 11
aida06 fault 0x7f18 : 0x7f19 : 1
aida07 fault 0xdd2c : 0xdd2d : 1
aida08 fault 0x1557 : 0x1558 : 1
White Rabbit error counter test result: Passed 8, Failed 8
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Base Current Difference
aida05 fault 0x0 : 0x3 : 3
FPGA Timestamp error counter test result: Passed 15, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 56 35 27 8 1 4 1 2 2 3 6 : 35816
aida02 : 43 31 27 5 3 1 3 3 2 3 6 : 36404
aida03 : 45 28 28 16 4 2 2 4 1 3 6 : 36180
aida04 : 2 2 18 12 4 3 3 4 2 2 6 : 34872
aida05 : 28 28 24 10 2 2 2 2 1 4 6 : 36752
aida06 : 28 11 9 5 2 3 3 3 1 3 6 : 35064
aida07 : 52 24 23 9 4 3 1 2 2 3 6 : 35744
aida08 : 21 26 27 8 0 2 3 3 3 2 6 : 35284
aida09 : 40 32 26 10 3 5 1 3 1 3 6 : 35520
aida10 : 46 23 27 7 3 1 1 3 3 3 6 : 36928
aida11 : 49 31 20 10 2 2 1 2 2 3 6 : 35516
aida12 : 39 35 17 9 2 2 3 4 3 2 6 : 35940
aida13 : 40 32 20 7 4 2 3 4 3 2 6 : 36032
aida14 : 33 33 16 10 3 4 3 4 3 2 6 : 36236
aida15 : 53 27 25 12 3 2 4 4 2 2 6 : 35452
aida16 : 35 22 32 15 3 4 3 3 1 3 6 : 36060
Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same
FEE : aida01 => Options file size is 1026 Last changed Thu May 13 05:49:42 CEST 2021
FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021
FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021
FEE : aida04 => Options file size is 1025 Last changed Fri May 14 16:54:56 CEST 2021
FEE : aida05 => Options file size is 1014 Last changed Thu Apr 29 14:43:55 CEST 2021
FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021
FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021
FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021
FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021
FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021
FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
18:30
Temperatures - OK (attach 18)
Bias OK (attach 19)
Stats - attach 20-24
System-wide checks
Clock - all pass
ADC - all pass
Base Current Difference
aida01 fault 0xf932 : 0xf933 : 1
aida02 fault 0x62ec : 0x62ed : 1
aida03 fault 0x8679 : 0x867a : 1
aida04 fault 0xf0e4 : 0xf0e5 : 1
aida05 fault 0x9db8 : 0x9dc3 : 11
aida06 fault 0x7f18 : 0x7f19 : 1
aida07 fault 0xdd2c : 0xdd2d : 1
aida08 fault 0x1557 : 0x1558 : 1
White Rabbit error counter test result: Passed 8, Failed 8
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Base Current Difference
aida05 fault 0x0 : 0x3 : 3
FPGA Timestamp error counter test result: Passed 15, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 41 31 31 8 1 4 1 2 2 3 6 : 35788
aida02 : 42 31 29 5 3 2 4 4 1 3 6 : 36304
aida03 : 29 30 29 16 4 3 2 4 1 3 6 : 36276
aida04 : 28 4 20 12 4 3 4 4 2 2 6 : 35280
aida05 : 25 28 23 10 2 2 2 2 1 4 6 : 36724
aida06 : 5 3 10 5 2 4 2 2 2 3 6 : 35308
aida07 : 38 26 22 9 4 3 1 2 2 3 6 : 35688
aida08 : 52 30 28 8 0 2 2 3 3 2 6 : 35200
aida09 : 22 26 21 10 3 4 1 4 1 3 6 : 35704
aida10 : 37 28 25 7 3 1 1 3 3 3 6 : 36900
aida11 : 53 30 20 10 2 3 2 2 2 3 6 : 35908
aida12 : 37 34 17 10 2 2 3 4 3 2 6 : 35956
aida13 : 47 34 16 7 4 2 3 4 3 2 6 : 36012
aida14 : 37 29 17 10 3 4 3 4 3 2 6 : 36236
aida15 : 44 28 25 12 3 2 4 4 2 2 6 : 35424
aida16 : 40 21 33 15 3 4 1 3 1 3 6 : 35576
18:40 Analysed R5_67. Attached. Dead time improved. Max ~1.5%
19:40 Temperatures OK
Bias OK - attach 26
Stats - attach 27-32
System-wide checks
Clock, ADC - all pass
WR
Base Current Difference
aida01 fault 0xf932 : 0xf934 : 2
aida02 fault 0x62ec : 0x62ee : 2
aida03 fault 0x8679 : 0x867b : 2
aida04 fault 0xf0e4 : 0xf0e6 : 2
aida05 fault 0x9db8 : 0x9dc4 : 12
aida06 fault 0x7f18 : 0x7f1a : 2
aida07 fault 0xdd2c : 0xdd2e : 2
aida08 fault 0x1557 : 0x1559 : 2
White Rabbit error counter test result: Passed 8, Failed 8
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Base Current Difference
aida05 fault 0x0 : 0x3 : 3
FPGA Timestamp error counter test result: Passed 15, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 41 33 30 8 1 4 1 2 2 3 6 : 35788
aida02 : 51 30 30 5 3 2 3 4 1 3 6 : 36092
aida03 : 52 31 28 16 4 2 2 5 1 3 6 : 36744
aida04 : 6 8 20 12 4 4 3 4 2 2 6 : 35096
aida05 : 30 31 22 10 2 2 2 2 1 4 6 : 36752
aida06 : 12 6 10 5 2 3 3 2 2 3 6 : 35488
aida07 : 53 24 21 9 4 3 1 3 2 3 6 : 36228
aida08 : 36 28 28 9 0 2 3 3 3 2 6 : 35408
aida09 : 27 28 25 10 3 4 2 3 1 3 6 : 35548
aida10 : 50 23 26 7 3 1 1 3 3 3 6 : 36928
aida11 : 42 28 22 10 3 3 2 2 2 3 6 : 35944
aida12 : 39 35 15 10 2 2 2 4 3 2 6 : 35684
aida13 : 43 34 17 7 4 2 3 4 3 2 6 : 36012
aida14 : 42 32 16 10 3 4 3 4 3 2 6 : 36264
aida15 : 36 30 25 12 3 2 4 3 3 2 6 : 35920
aida16 : 40 21 25 15 3 4 2 3 1 3 6 : 35704
Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same
FEE : aida01 => Options file size is 1026 Last changed Thu May 13 05:49:42 CEST 2021
FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021
FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021
FEE : aida04 => Options file size is 1025 Last changed Fri May 14 16:54:56 CEST 2021
FEE : aida05 => Options file size is 1014 Last changed Thu Apr 29 14:43:55 CEST 2021
FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021
FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021
FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021
FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021
FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021
FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
19:40 Analysed R5_86. Attached. Dead time as before.
19:57 Shift handed over to James S |
|
|
249
|
Mon Apr 19 19:19:18 2021 |
CB | Monday 19 April 20:00-24:00 shift | 20:19
Statistics OK (attach 1)
No faults found
Ucesb OK (attach 2)
Temps OK (attach 3)
Bias OK (attach 4)
System-wide checks - as per last check
aida09 fails clock (OK)
aida07 and 09 fail calibration (OK)
Base Current Difference
aida05 fault 0xdb9a : 0xdb9d : 3
aida06 fault 0xb74f : 0xb752 : 3
aida07 fault 0xd052 : 0xd05f : 13
aida08 fault 0xe4c1 : 0xe4c4 : 3
aida09 fault 0xaf4b : 0xaf4d : 2
White Rabbit error counter test result: Passed 7, Failed 5
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Base Current Difference
aida12 fault 0x0 : 0x29 : 41
FPGA Timestamp error counter test result: Passed 11, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 0 3 2 2 2 5 2 3 2 3 6 : 35704
aida02 : 19 4 1 1 1 2 2 3 3 3 6 : 36316
aida03 : 12 9 2 1 2 2 2 3 3 3 6 : 36408
aida04 : 16 3 5 4 2 4 2 3 3 3 6 : 36776
aida05 : 41 10 10 3 3 3 3 3 3 3 6 : 37172
aida06 : 25 21 9 3 2 3 1 4 3 3 6 : 37116
aida07 : 10 7 1 2 1 3 2 2 3 3 6 : 35952
aida08 : 33 7 5 1 1 2 2 3 3 3 6 : 36460
aida09 : 12 7 4 2 2 2 2 2 2 4 6 : 36968
aida10 : 16 6 2 1 1 4 3 3 2 3 6 : 35824
aida11 : 2 0 1 2 2 2 2 4 2 3 6 : 35800
aida12 : 15 6 2 0 2 4 2 2 3 3 6 : 36108
20:48 Started compressing *old* runs on Screen 2, Workspace 5
nice -n10 gzip -v R[...]_*
21:00 Stats OK, UCESB OK, No faults
21:07 Go4 spectra erased by remote shifters.
21:15 Local shifters report correlations lost. Beam may be intermittently removed for checks.
21:30 Still no beam. DAQ issues locally. AIDA MBS link had to be restarted due to operator mistake.
21:37 Beam back. Stats OK, UCESB OK, No faults found.
System wide checks:
Clock - aida09 fails
All modules now fail ADC calibration
FEE64 module aida01 failed
FEE64 module aida02 failed
FEE64 module aida03 failed
FEE64 module aida04 failed
FEE64 module aida05 failed
FEE64 module aida06 failed
FEE64 module aida07 failed
FEE64 module aida08 failed
FEE64 module aida09 failed
FEE64 module aida10 failed
FEE64 module aida11 failed
FEE64 module aida12 failed
Calibration test result: Passed 0, Failed 12
Base Current Difference
aida05 fault 0xdb9a : 0xdb9d : 3
aida06 fault 0xb74f : 0xb752 : 3
aida07 fault 0xd052 : 0xd061 : 15
aida08 fault 0xe4c1 : 0xe4c4 : 3
aida09 fault 0xaf4b : 0xaf4d : 2
White Rabbit error counter test result: Passed 7, Failed 5
Base Current Difference
aida12 fault 0x0 : 0x36 : 54
FPGA Timestamp error counter test result: Passed 11, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last
Returned 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 2 6 3 1 2 4 2 4 2 3 6 : 36104
aida02 : 2 3 0 2 2 4 2 2 3 3 6 : 36064
aida03 : 6 3 3 3 2 2 2 2 4 3 6 : 36928
aida04 : 15 5 8 4 3 3 2 3 3 3 6 : 36772
aida05 : 10 5 8 4 4 4 3 2 3 3 6 : 36688
aida06 : 14 17 10 3 3 3 1 4 3 3 6 : 37120
aida07 : 3 4 1 1 1 2 2 2 3 3 6 : 35740
aida08 : 12 5 7 2 2 4 1 2 3 3 6 : 35976
aida09 : 0 6 2 0 2 2 2 2 2 4 6 : 36816
aida10 : 4 2 5 2 1 4 2 4 2 3 6 : 36080
aida11 : 14 3 2 3 1 2 2 4 2 3 6 : 35856
aida12 : 1 2 0 2 1 4 1 3 3 3 6 : 36244
22:05 Stats OK (attach 5)
Temps OK (attach 6)
Bias OK (attach 7)
System wide checks as before - see above.
22:13 ADC calibration - Only 06,07 and 09 now fail
(TD re-calibrated remotely)
22:53 Beam off to allow access to S4 to reboot VME crate (akash).
22:58 Started compressing *old* runs on Screen 2, Workspace 5
nice -n10 gzip -v R[1-2][0-9]_* R[3][0-2]_*
aka everything *except* R33_*
23:11: Beam is back. Stats and UCESB as before.
23:24: Stats OK (attach 8)
Temps OK (attach 9)
Bias OK (attach 10)
UCESB OK (attach 11)
System-wide checks
Clock: 06 fails
Calibration: 06,07,09 fail
Base Current Difference
aida05 fault 0xdb9a : 0xdb9d : 3
aida06 fault 0xb74f : 0xb752 : 3
aida07 fault 0xd052 : 0xd066 : 20
aida08 fault 0xe4c1 : 0xe4c4 : 3
aida09 fault 0xaf4b : 0xaf4d : 2
White Rabbit error counter test result: Passed 7, Failed 5
Base Current Difference
aida05 fault 0xdb9a : 0xdb9d : 3
aida06 fault 0xb74f : 0xb752 : 3
aida07 fault 0xd052 : 0xd066 : 20
aida08 fault 0xe4c1 : 0xe4c4 : 3
aida09 fault 0xaf4b : 0xaf4d : 2
White Rabbit error counter test result: Passed 7, Failed 5
Returned 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 15 8 2 2 3 4 3 3 2 3 6 : 35996
aida02 : 8 12 4 1 2 4 3 2 3 3 6 : 36448
aida03 : 2 4 2 4 3 3 1 3 3 3 6 : 36360
aida04 : 7 8 4 4 2 4 3 3 3 3 6 : 37020
aida05 : 3 5 7 4 3 3 3 3 3 3 6 : 36964
aida06 : 2 6 8 2 3 4 2 3 3 3 6 : 36792
aida07 : 8 4 5 2 0 3 1 2 3 4 6 : 37712
aida08 : 26 11 3 1 1 3 1 3 3 3 6 : 36304
aida09 : 22 4 2 2 3 4 1 3 3 3 6 : 36504
aida10 : 21 6 6 2 0 4 2 3 3 3 6 : 36644
aida11 : 22 7 2 3 2 1 2 4 2 3 6 : 35856
aida12 : 16 9 2 2 3 3 2 2 3 3 6 : 36136 |
|
|
252
|
Tue Apr 20 10:54:41 2021 |
CB | April 20 12:00 - 16:00 shift | 11:55 CA got AIDA back online
12:00 Stats OK (attach 1)
No faults found
UCESB OK - no beam atm (attach 2)
Temps OK (running hotter than yesterday, but not worrying yet) - attach 3
Bias OK (attach 4)
System wide checks
Clock - *all* pass
ADC - 06 fails
WR - *all* pass
FPGA *all* pass
Memory info
Returned 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 13 4 1 3 2 1 2 4 2 3 7 : 39876
aida02 : 23 6 1 2 2 2 1 4 2 3 7 : 39772
aida03 : 24 4 4 1 2 3 1 4 2 3 7 : 39904
aida04 : 10 3 1 1 1 3 1 4 2 3 7 : 39728
aida05 : 12 2 3 2 1 4 2 3 1 4 7 : 40688
aida06 : 10 5 4 2 2 3 3 4 2 3 7 : 40400
aida07 : 22 6 1 3 1 3 1 4 2 3 7 : 39864
aida08 : 20 4 4 1 2 3 2 4 2 3 7 : 40144
aida09 : 1 2 2 3 1 2 1 3 3 3 7 : 40148
aida10 : 3 3 1 2 2 2 2 3 2 3 7 : 39412
aida11 : 25 7 0 1 0 3 2 3 2 3 7 : 39484
aida12 : 21 7 3 1 3 2 2 3 2 3 7 : 39580
Waiting for beam.
12:42 Stats OK, UCESB ok, No faults. No beam.
13:21 Stats OK, UCESB ok, No faults. No beam.
13:24 Implants in DSSD#3. ASIC check. Disappeared. No beam.
14:00 No beam.
Stats OK (attach 5)
Temps OK (attach 6)
UCESB OK
Bias OK (attach 7)
System wide checks
Clock OK
ADC calibration 06 fails
WR OK
FPGA OK
Returned 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 16 9 4 1 3 2 3 3 2 3 7 : 39848
aida02 : 15 8 2 2 2 3 2 3 2 3 7 : 39644
aida03 : 8 1 2 3 4 3 2 3 2 3 7 : 39720
aida04 : 25 12 3 1 1 3 1 4 2 3 7 : 39892
aida05 : 13 4 4 4 0 3 2 3 1 4 7 : 40596
aida06 : 21 8 3 3 0 3 3 4 2 3 7 : 40356
aida07 : 17 11 0 1 1 3 1 4 2 3 7 : 39804
aida08 : 16 8 2 3 2 3 1 4 2 3 7 : 39936
aida09 : 17 6 3 2 1 2 1 4 2 3 7 : 39716
aida10 : 3 3 2 2 4 1 2 2 3 3 7 : 39940
aida11 : 4 4 4 1 1 3 3 2 2 3 7 : 39248
aida12 : 2 4 1 3 1 2 2 3 2 3 7 : 39384
14:30 Stats OK, UCESB ok, No faults. No beam.
15:00 Stats OK, UCESB ok, No faults. No beam.
15:24 Beam is back!
Stats OK (attach 8), UCESB ok (attach 9), No faults.
15:50 Shift handed over to Liam |
|
|
324
|
Tue May 18 14:57:43 2021 |
CB | Tuesday 18th May 16:00 - 20:00 | 15:58 Took shift over from OH and PP
Stats OK - attach 1
Temps OK - attach 2
Bias OK - attach 3
System-wide checks
Clock - all pass
ADC - all fail (as before)
Base Current Difference
aida05 fault 0x500 : 0x510 : 16
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
FPGA - all pass
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 22 8 7 4 1 4 2 2 2 2 7 : 37320
aida02 : 12 9 4 2 4 2 3 3 3 3 6 : 36856
aida03 : 19 6 7 2 2 2 2 4 3 3 6 : 37036
aida04 : 18 9 10 6 1 4 1 4 3 3 6 : 37168
aida05 : 17 12 2 1 2 3 3 3 3 3 6 : 36836
aida06 : 19 8 7 7 2 4 2 4 3 3 6 : 37468
aida07 : 28 5 4 1 2 4 2 3 2 2 7 : 37752
aida08 : 17 5 4 2 1 2 2 3 3 3 6 : 36396
aida09 : 21 10 4 5 4 4 3 3 3 3 6 : 37252
aida10 : 15 13 4 2 2 2 3 2 2 4 6 : 37284
aida11 : 22 13 3 3 4 3 1 4 3 3 6 : 37072
aida12 : 2 8 1 3 1 3 2 3 3 3 6 : 36472
aida13 : 23 5 4 4 1 4 3 2 3 3 6 : 36484
aida14 : 19 7 4 3 1 3 2 4 2 4 6 : 38116
aida15 : 20 10 2 2 3 2 3 2 3 3 6 : 36288
aida16 : 29 6 1 2 0 3 1 4 3 3 6 : 36724
Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same
FEE : aida01 => Options file size is 1026 Last changed Mon May 17 11:43:04 CEST 2021
FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021
FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021
FEE : aida04 => Options file size is 1025 Last changed Fri May 14 16:54:56 CEST 2021
FEE : aida05 => Options file size is 1025 Last changed Mon May 17 06:25:41 CEST 2021
FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021
FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021
FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021
FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021
FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021
FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
Analysed R14_342. Attach 4. Dead time <5%
17:00
Stats OK - attach 5
Temps OK - as before
Bias increasing quite quickly - attach 6
System-wide checks
System-wide checks
Clock - all pass
ADC - all fail (as before)
Base Current Difference
aida05 fault 0x500 : 0x512 : 18
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
FPGA - all pass
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 28 7 8 4 1 4 2 2 2 2 7 : 37352
aida02 : 24 11 6 4 3 2 3 2 3 3 6 : 36440
aida03 : 17 11 5 2 1 2 2 3 3 3 6 : 36460
aida04 : 25 13 10 6 2 4 2 3 3 3 6 : 37036
aida05 : 23 7 3 2 2 3 3 3 3 3 6 : 36868
aida06 : 1 12 3 8 2 4 3 3 3 3 6 : 37140
aida07 : 22 12 1 1 2 4 2 2 2 2 7 : 37224
aida08 : 21 8 7 2 1 3 3 2 3 3 6 : 36356
aida09 : 23 7 4 6 4 3 2 4 3 3 6 : 37396
aida10 : 27 7 2 2 2 2 3 3 2 4 6 : 37764
aida11 : 12 5 3 5 4 3 1 4 3 3 6 : 37032
aida12 : 23 9 4 1 2 3 2 3 3 3 6 : 36612
aida13 : 10 12 6 3 1 4 3 2 3 3 6 : 36488
aida14 : 23 7 3 3 1 3 2 3 2 4 6 : 37604
aida15 : 22 6 6 4 2 2 3 2 3 3 6 : 36328
aida16 : 27 7 3 1 0 3 1 4 3 3 6 : 36724
18:00
Stats OK - attach 7
Temps OK - as before
Bias - attach 8
System-wide checks - as before except
Base Current Difference
aida05 fault 0x500 : 0x517 : 23
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Analysed R14_371. Attach 9. Dead time below 5%.
18:35 MBS DAQ crashed
18:40
Stats OK - attach 9
Temps OK - as before
Bias - attach 10
System-wide checks - as before except
Base Current Difference
aida05 fault 0x500 : 0x51a : 26
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
18:42 MBS DAQ restarted - new file being opened.
19:36
Stats OK - attach 11
Temps OK - attach 12
Bias - attach 13
System-wide checks
Clock OK
ADC all fail
Base Current Difference
aida05 fault 0x500 : 0x51e : 30
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
FPGA OK
Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k
aida01 : 24 11 5 4 1 4 2 3 2 2 7 : 37832
aida02 : 0 5 6 3 4 2 3 2 3 3 6 : 36328
aida03 : 15 8 5 3 2 2 1 3 4 3 6 : 37292
aida04 : 14 8 7 5 3 4 2 3 3 3 6 : 36936
aida05 : 31 6 1 1 2 3 3 3 2 4 6 : 37852
aida06 : 9 8 3 8 2 4 3 3 3 3 6 : 37140
aida07 : 21 7 2 1 2 4 1 3 2 2 7 : 37452
aida08 : 8 4 5 3 1 3 2 3 3 3 6 : 36528
aida09 : 24 7 3 5 4 3 2 4 3 3 6 : 37352
aida10 : 19 9 7 1 2 2 3 2 2 4 6 : 37284
aida11 : 27 5 0 5 4 3 1 4 3 3 6 : 37044
aida12 : 31 9 2 1 2 3 2 3 3 3 6 : 36612
aida13 : 21 10 4 3 1 4 3 2 3 3 6 : 36484
aida14 : 22 6 4 2 1 3 2 4 2 4 6 : 38088
aida15 : 21 9 3 4 2 2 3 2 3 3 6 : 36300
aida16 : 23 11 4 2 1 4 2 3 3 3 6 : 36724
19:43 Shift handed over to LS |
|
|
332
|
Wed May 19 14:54:36 2021 |
CB | Wednesday 19 May 16:00 - 20:00 | 15:55 Took over from OH
16:00
Stats OK - attach 1
Temps OK - attach 2
Bias OK - attach 3
System wide checks
All OK, except ADC all fail (as before) and WR
Base Current Difference
aida05 fault 0x500 : 0x567 : 103
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
Analysed R14_691. Attach 4. Dead time <5%
16:34 MBS changes file.
17:00
Stats OK - attach 5
Temps OK - as before
System wide checks as before
Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same
FEE : aida01 => Options file size is 1026 Last changed Mon May 17 11:43:04 CEST 2021
FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021
FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021
FEE : aida04 => Options file size is 1025 Last changed Fri May 14 16:54:56 CEST 2021
FEE : aida05 => Options file size is 1025 Last changed Mon May 17 06:25:41 CEST 2021
FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021
FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021
FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021
FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021
FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021
FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021
17:55
Stats OK - attach 6
Temps OK - as before
Leakage current approaching 10 uA - attach 7
System-wide checks - as before except
Base Current Difference
aida05 fault 0x500 : 0x568 : 104
White Rabbit error counter test result: Passed 15, Failed 1
Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR
18:01 MBS switches to new file
18:52
Stats OK - attach 8
Temps OK - as before
System-wide checks as before
Analysed R14_741. Avg. dead time slightly increased to 5.1%. Attach 9
19:36 Stats OK - attach 10
Bias - attach 11
19:48 Shift handed over to LS |
|
|
443
|
Fri May 13 15:00:23 2022 |
CB | 13 March - 16:00-24:00 shift | 16:00 Took over remotely from OH, TD who remain in GSI
Stats OK - attach 1
Stats & Leakage OK - attach 2
Temps OK
Grafana OK - attach 3
System-wide checks: aida09 fails clock (1), aida02 06 09 10 13 fail ADC calibration, all pass WR
17:29 All good, but no beam.
17:30 Beam is back
17:58 No beam again
18:10 Beam is back. Stats OK.
Ucesb OK - attach 4
Stats & Leakage currents ok - attach 5
Temps OK - attach 6
Grafana OK - attach 7
System-wide checks as before.
19:36 No beam again.
20:37 Beam is back
Stats OK - attach 8
Leakage OK
Temps OK
Grafana OK - attach 9
Ucesb OK - attach 10
System-wide checks as before
21:10 Lost anydesk connection to DAQ. Local shifters report AIDA still transferring data.
21:15 Local shifters report anydesk connection window still open. Unclear why DAQ reported offline in anydesk.
21:20 Connection restored itself. Hopefully it was a one-off.
22:51 Stats & Leakage current OK - attach 11
Temps OK
Grafana OK - attach 12
Ucesb OK - attach 13
System-wide checks as before |
|
|
142
|
Wed Mar 11 17:21:33 2020 |
CA, TD, OH | Wednesday 11 March 16.00-00.00 | 18.25 DAQ currently running No Storage mode
ASIC settings 2019Oct31-13.24.23
slow comparator 0xa
BNC PB-5 pulser
amplitude 1.0V , attenuator x1
frequency 2Hz
decay time 1ms
DSSSD biases & leakage currents OK - attachment 1
FEE64 temps OK - attachment 2
good events statistics OK - attachment 3
system wide checks - OK
WR timestamp control - attachments 4 & 5
merger & TapeServer OK - attachments 6-8
rate spectra - attachment 9
1.8.L spectra - attachments 10 & 11
aida03 72 ch FWHM
20:36 DSSSD biases & leakage currents OK - attachment 12
FEE64 temps OK - attachment 13
good events statistics OK - attachment 14
all system wide checks ok
21.50 beam starts back up
DAQ running, TapeServer now writing to file R7_0
data rate ~ 25 Mb/s
data forwarding to MBS ok
merger ok, data item rate ~ 2.7 million items/sec
spill time length is now 3 seconds
1500 count rate per spill, ~ 300 Hz implant rate in AIDA
22.35 FEE64 temps OK - attachment 15
good event statistics ok - attachment 16
detector bias/ leakage currents ok - attachment 17
all system wide checks ok
22.47 attachments 18 & 19 - high energy spectra for all FEE64 (1.8.H)
attachment 20 - hit rate spectra for all FEE64
23.02 beam down
on file R7_55
23.11 beam back online
on file R7_61
23.15 system wide checks all ok
detector bias/ leakage currents ok - attachment 21
good event statistics ok - attachment 22
FEE64 temperatures ok - attachment 23 |
|
|
15
|
Wed Jan 23 08:12:01 2019 |
CA, TD, NH, VP | January 22nd 2019 | Attachment 1 - 1.8.W waveform spectra with pulser signal
Attachment 2 - 1.8.L pulser peak spectra
widths: aida01 - 16.06
aida04 - 20.68
aida05 - 14.03
aida08 - 73.02
aida09 - 669.29
aida11 - 405.35
aida12 - 397.6
Attachment 3 - good event statistics
fast comparator threshold (LEC) at 0xff
FEEs 8,9,11,12 running hot
Attachment 4 - FEE64 temperatures - all ok
System wide checks ok, except aida02 fails ADC calibration
Leak found in seal on cooling pipe, switched power off |
|
|
16
|
Wed Jan 23 09:25:55 2019 |
CA, TD, NH, VP | MACB and setup pics 23.01.19 | Pictures of leaking cooling pipe
MACB switch settings
AIDA mount - needs rotated
Attachment 11 - AIDA@DESPEC MACB settings - 100MHz and WR |
|
|
17
|
Wed Jan 23 17:03:08 2019 |
CA, TD, NH, VP | January 23rd 2019 | Post White Rabbit update
Attachment 1 - 1.8.W pulser waveform spectra for all FEE64
- pulser signals observed in all FEE64
Attachment 2 - good event statistics - aida08 has significant noise
Attachment 3 - FEE64 temperatures - all ok, but firmware version not displayed
Attachment 4 - 1.8.L pulser peak spectra
- widths:
aida01 - 23.66
aida02 - 19.76
aida03 - 20.43
aida04 - 18.82
aida05 - 20.05
aida06 - 41.04
aida07 - 21.24
aida08 - 205.02 (noisy FEE64)
aida09 - 24.81
aida10 - 22.85
aida11 - 13.98
aida12 - 19.90
Attachment 5 - New Merger statistics
Attachment 6 - Raw data stream |
|
|
18
|
Thu Jan 24 10:21:26 2019 |
CA, TD, NH, VP | January 24th 2019 | 10.30 AIDA setup and DAQ start complete
writing to file TapeData/NULL/R1
FEE64 Temperatures and Good event statistics ok (attachments 1 and 2)
11.00 results of analyser - shows significant number of timewarps in aida07, and a few in aida01-04
11.24 compared timestamps between mbs and AIDA, agree to 8 digits (attachment 3)
12.49 DAQ and Merger stopped and restarted
Raised slow comparator threshold from 0xa to 0x64
Raised fast comparator threshold (LEC/MEC) from 0xf to 0xff
12.51 Good event statistics: aida08 running at a normal rate
pulser peak (1.8.L) no longer has noise shoulder (attachment 4)
writing to file TapeData/NULL/R2
13.58 stopped writing to file. Pulser frequency increased to 1 kHz
writing to file TapeData/NULL/R3
15.00 file R4 - DAQ startup
17.58 trimmed and re-crimped ground wire on aida08
lowered pulser freq back to 50Hz
reduced slow comparator threshold to 0xa, fast comparator threshold (LEC) to 0xf
good event stats ok, aida08 no longer running hot (attachment 6)
1.8.L and 1.8.W spectra of aida08 (attachment 5)
pulser peak width now at 55.71
FEE64 temperatures ok (attachment 7) |
|
|
22
|
Thu Jan 24 17:16:32 2019 |
CA, TD, NH, VP | MACB time switch settings | AIDA@DESPEC MACB time switch settings before and after WR are as follows.
Attachment 1 - MACB 1-4 from left to right
MACB number: 1 2 3 4
100MHZ clock setting (before WR): 0 2 2 2
White Rabbit setting (after WR): 3 3 3 3 |
|