AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DTAS, all entries

New |  Find |  Select |  Import |  Config |  Last day |  Help

Full | Summary | Threaded     -- All entries -- Last day Last 3 Days Last week Last month Last 3 Months Last 6 Months Last Year  142 Entries

Goto page 1, 2, 3 ... 6, 7, 8

ID Date Author Subject Text   144   Wed Jun 19 05:10:15 2019 Alvaro Aida plastic - gain change TAC AIDAPL - CryA changed After increasing the gain, x2 peaks in TAC      143   Mon Jun 17 19:12:33 2019 Victor Total SUM in coincidence with AIDA Plastic Also TAC DTAS-Plastic AIDA      142   Mon Jun 17 19:11:06 2019 Victor TAC slowest module vs fastest module DTAS Inside events of 320ns window      141   Mon Jun 17 06:28:06 2019 Victor MC number of implants            Counts in DTAS Proposal   2730  4 days     888      139   Sun Jun 16 23:37:47 2019 Ela, Victor root file 5:30-7:30        138   Sun Jun 16 23:37:18 2019 Ela, Victor root file 3:30-5:30        137   Sun Jun 16 22:56:41 2019 Victor rates modules in coincidence with F11 Module Rate cps Rate coin. F11 cps Difference cps      136   Sun Jun 16 22:02:45 2019 Victor Sum in coincidence with F11 TAC DTAS (slowest module of the sum) and F11 Total sum in coincidence with F11      135   Sun Jun 16 21:44:38 2019 Ela, Victor root file 3:30-5:30        134   Sun Jun 16 21:43:36 2019 Ela, Victor root file 1:30-3:30        133   Sun Jun 16 19:18:15 2019 Ela, Victor root files from run 30 to run 45    6x    132   Sun Jun 16 07:31:01 2019 Victor The bump in the mutiplicities We have calculated the spectra of the module multiplicity for each side (careful! the maximum is 8, since it is  8x    131   Sun Jun 16 07:08:10 2019 Ela, Sonja, Victor, Alejandro problems in coincidence crystals-F11 We have noticed that there is a problems in the coincidence Crystals-F11. The TAC shows a lot of counts. The      130   Sun Jun 16 06:55:31 2019 Ela, Sonja, Victor root file 12:30-14:30        129   Sun Jun 16 04:44:05 2019 Ela, Sonja, Victor root file 10:30-12:30 The beam stopped a couple of times due to problems before RRC      128   Sun Jun 16 03:42:17 2019 Ela, Sonja, Victor root file 8:30-10:30        127   Sun Jun 16 02:07:29 2019 Victor Total sum (black) and anodes Different cuts at high energy in individual spectra (anodes) and effect in the total sum      126   Sun Jun 16 01:36:08 2019 Victor Mm 100Sn beam        125   Sun Jun 16 00:52:27 2019 Ela, Sonja, Victor root file 6:30-8:30        124   Sat Jun 15 22:43:20 2019 Pancho & Kike root file data 4:30 - 6:30 corresponding to runs .dlt 15-17      123   Sat Jun 15 20:43:50 2019 Pancho & Kike root file data 2:30 - 4:30 corresponding to runs .dlt 12-14      122   Sat Jun 15 18:39:07 2019 Pancho & Kike root files 100Sn root files corresponding to runs 06,07,08 (190616_0030_100Sn_008.root) and runs 09,10,11 (190616_0230_100Sn_011.root) two hours each      121   Sat Jun 15 18:38:15 2019 Pancho & Kike run 12 Shifters: Pancho & Kike Degrader: none      120   Sat Jun 15 18:15:08 2019 Pancho& Kike run 9 Shifters: Pancho & Kike Degrader: none  9x    119   Fri Jun 14 16:22:25 2019 AT, OH, JA, CG, TD AIDA Sync Problem with the sync checker appeared AIDA was not its notmal 14us out from DTAS.      118   Wed Jun 12 02:04:07 2019 AA, EN, PM, AT background during in-beam exp. In-beam experiment going on. Only 12h of beam in the last 21h.      117   Tue Jun 11 01:45:55 2019 Pancho, Ale background Start: 09:46      116   Mon Jun 10 13:02:16 2019 Jose, Pancho, Ale background, Aida in Start: 21:03 Stop: 09:30  8x    115   Mon Jun 10 12:48:01 2019 Ale, Jose New Config file Conf file with new calibration: 20190610_2035_Conf_DTAS.xlsx  6x    114   Mon Jun 10 12:31:52 2019 Ale, Jose New calibration New calibration with more statistics File: 20190610_2030_60Co_137Cs_AIDA_in.root      113   Mon Jun 10 10:44:36 2019 Ale, Jose New Conf file with new calibration File: 20190610_1835_Conf_DTAS.xlsx      112   Mon Jun 10 10:01:17 2019 Jose, Ale Co and Cs for new calibration Start: 17:57 ? Stop:18:15      111   Mon Jun 10 09:58:42 2019 Jose, Ale Gain matching We have corrected small gain changes by changing the HV of detectors. Attached are the new values      110   Mon Jun 10 08:07:17 2019 Ale, Jose Test of pulser count rates File: 20190610_1602_background_AIDA_in.root SyncPulse: 61777      109   Mon Jun 10 04:18:24 2019 Ale, Jose New Configuration File File:  20190610_1145_Conf_DTAS.xlsx Several changes and corrections      108   Mon Jun 10 04:14:39 2019 Ale, Jose Background measurement overnight Start:~14:00 (June 9) Stop:10:30      107   Sun Jun 9 04:03:38 2019 Jorge, Jose, Pancho, Alvaro, Kike, Ale effect of the pulser in the low energy part of the anodes There is an effect if the pulser is at higher frequency in the low energy part of the anodes (apart from the funny situation      106   Sun Jun 9 03:59:40 2019 Many some cable changes The cable of detector 8 was changed (long cable) to reduce the noise. The cable (long) of the reference detector was also changed.      105   Sat Jun 8 04:38:30 2019 Nacher, Algora, Tain, Molina source top and bottom 137Cs top and bottom test... to check differences we positiones the source at the top and bottom of AIDA respectively.      104   Sat Jun 8 04:22:39 2019 Jorge Alvaro AIDA TAS correlation with 137Cs Files at mars /home/briken/190607AidaTasTest137Cs For this experiment TAS Signal is stored      103   Fri Jun 7 12:35:14 2019 Jorge, Alvaro Correlation time AIDA_DTAS for 60Co source Files at mars /home/briken/190607AidaTasTest60Co      102   Fri Jun 7 09:37:15 2019 The same team Cs for the AIDA synch test Start: 17:41 Stop: 18:17 AIDA files: R19_1 (@17:57)      101   Fri Jun 7 08:47:17 2019 Jorge, Alvaro, Tom, Sunghan, Ale Co source, test of AIDA/TAS syncronization Start: 16:50 Stop: 17:28 Root: 201906071728_60Co_AIDA_in.root      100   Fri Jun 7 02:50:40 2019 SN, AA test of 24Na Start: 10:49 Stopt: 11:04 Lmd: 201906071049_24Na_AIDA_242.dlt  7x    99   Fri Jun 7 01:55:24 2019 CA, JA , AT merger test Setup: On 17th-May (11:18 - 11:38), AIDA was inside DTAS. Measurement of 60Co source.      98   Thu Jun 6 09:36:52 2019 Alvaro, Jorge, Ale new config file New config file: 20190606_Conf.xlsx Changed with respect to the earlier file      97   Tue Jun 4 06:27:55 2019 A. Algora (++Jorge,++ Alvaro) background with no beam Start: 14:25 Stop: 14:39 (partial, no beam, not erased), 14:58 (partial, no beam, not      96   Tue Jun 4 06:25:51 2019 A. Algora Lead shielding was "upgraded" With the help of Tom the additional lead pieces were put. So now the hole in the lead shielding matches the hole in the polyethylene      95   Mon Jun 3 12:59:31 2019 A. Algora Background, beam on, 102Sn coulex Start: 21:00 Stop: 14:24 (next day) Root: 201906041423_background_AIDA_in.root      94   Mon Jun 3 12:56:06 2019 A. Algora New configuration file The E range of the AIDA plastic for the construction of the TAIDA plastic spectrum has been changed. Also the range of the TAC_AIDAPL_CryA      93   Mon Jun 3 03:37:10 2019 A. Algora Background, beam on Start:11:36 Stop: 20:47 Root: 2019060312047_background_AIDA_in.root      92   Mon Jun 3 01:45:31 2019 A. Algora Background, no beam for a period Start: 09:45 Stop (partial save): 09:55, 10:00, 10:14,10:29,10:37,10:46      91   Sun Jun 2 12:31:45 2019 A. Algora Background, beam on Start: 20:32 Stop: 09;44 Root: 201906030944_background_AIDA_in.root      90   Sun Jun 2 11:23:23 2019 A. Algora Background, beam on Start: 19:24 Stop: 20:27 Root: 201906022028_background_AIDA_in.root      89   Sat Jun 1 14:31:24 2019 A. Algora Background, beam on Start: 22:32 Stop: 19:18 (next day) Comments: According to Tom, the      88   Sat Jun 1 10:04:54 2019 A. Algora background with beam Start: 18:05 Stop: 22:27 Comments: Rate at F7: 3,3 kHz,      87   Sat Jun 1 08:25:47 2019 A. Algora Background, without and with beam Start: 16:26 Stop: 17:20 (until then no beam), Root1: 201906011720_background_AIDA_in.root  7x    86   Sat Jun 1 07:59:20 2019 A. Algora Background, no beam Start: approximate 15:54 Stop: 16:23 Root: 201906011624_background_AIDA_in.root      85   Fri May 31 14:29:34 2019 A. Algora Background with beam Start: 22:29 Stop: 15:44 (next day) Root: 201906011544_background_AIDA_in.root      84   Fri May 31 14:17:13 2019 A. Algora New config file A new config file provided by Jose and Alvaro is loaded cp 20190531_Conf_JLTAT.xlsx 20190531_Conf_2.xlsx      83   Fri May 31 09:49:08 2019 A. Algora Backgroun, beam on Start: 17:49 Stop: 22:11 Root: 201905312211_background_AIDA_in.root      82   Fri May 31 07:03:37 2019 A. Algora Background, beam on, rates at F11PL and AIDAPL Start: 15:04 Stop: partial (17:43), 201905311743_background_AIDA_in.root (file corrupt again), system will be restarted      81   Fri May 31 06:48:58 2019 A. Algora T spectra for AIDA and F11 plastics T spectra for AIDAPL and F11PLL and F11PLR are defined from now on. The ancilliary card was not saving the CFD values for all channels.      80   Fri May 31 02:41:55 2019 A. Algora Background, beam on Start: 10:42 Stop: 11:49 Root: 201905311149_background_AIDA_in.root  7x    79   Thu May 30 12:08:01 2019 A. Algora background, dacq restarted before the measurement Start: 20:09 Stop: 10:17 Root:  201905311017_background_AIDA_in.root      78   Thu May 30 08:57:34 2019 A. Algora Background, no beam + beam, file not saved Start: 16:57 Stop: Comments: first part no beam, but      77   Thu May 30 08:43:29 2019 A. Algora Background no beam Start: 16:43 Stop: 16:56 Root: 201905301656_background_AIDA_in.root      76   Thu May 30 07:21:41 2019 A. Algora Background with beam on Start: 15:21 Stop: 16:41 Root: 201905301642_background_AIDA_in.root      75   Thu May 30 06:46:10 2019 A. Algora Background with beam Again a new test with the beam on. At the begining the beam was off and it can be noticed. There is a lead wall after F11      74   Thu May 30 06:41:18 2019 A. Algora Background with the beam There was an small increase in the counting rate of the detectors after the beam was delivered. The rate at      73   Thu May 30 02:44:56 2019 A. Algora Background, just a test Start: 11:01 Stop: 13:37 Root: 201905301337_background_AIDA_in.root      72   Thu May 30 02:03:33 2019 A. Algora Ref detector position changed, AIDA plastik HV changed The position of the reference detector in the ancilliary card was changed from channel 10 to channel 9. Remember that this is important      71   Wed May 29 10:01:10 2019 A. Algora Background, no lmd, AIDA in Start: 18:02 Stop: 18:33, partial file (201905291833_background_AIDA_in.root), Stop: 09:53 saved also next day (30/05) 201905300953_background_AIDA_in.root      70   Wed May 29 09:49:25 2019 A. Algora New configuration file New configuration file after a few small changes in thresholds.      69   Wed May 29 09:08:11 2019 A. Algora AIDA plastic setting changed AIDA plastic changed. HV was at 1000 V, it was changed to 1300 V      68   Wed May 29 08:29:26 2019 A. Algora latest conf file Latest configuration file from 28 of May      67   Wed May 29 07:04:19 2019 A. Algora F11 plastic connected F11 plastic has been connected to our dacq as it was in the earlier BRIKEN setting. The detector cables were followed      66   Wed May 29 02:07:20 2019 A. Algora Irradiation for 24Na Irradiation of two pieces of aluminium of 80 mm x 40 mm x 10 mm will be performed at the second BigRips dipole.      65   Tue May 28 07:49:51 2019 A. Algora Background, no lmd Start: 15:50 Stop: 10:09 (next day) Root: 201905291009_background_AIDA_in.root      64   Tue May 28 06:13:27 2019 A. Algora Background, Aida in Start: 14:13 Stop: 15:47 Lmd: Background_AIDA_in_201905281413_231.dlt      63   Tue May 28 05:43:41 2019 A. Algora 133Ba source. (IR052 from the third floor) Start: 13:43 Stop: 14:05 Comments: The source looks also      62   Tue May 28 05:30:03 2019 A. Algora Reference detector threshold changed Again the Reference detector was firing mainly in the noise. Threshold increased to 5000 !!!!      61   Mon May 27 13:58:03 2019 A. Algora Background, no lmd, AIDA in, no sources around Start: 21:59 Stop: 13:15 (next day, 28/05) Rates: 1.9-2.3 (dynodes), 1.8-1.9      60   Mon May 27 13:50:54 2019 A. Algora preparation directory moved The preparation directory was moved to /data/DRikenPreparation (from its first place /home/dacq/DRikenPreparation) because the      59   Mon May 27 12:54:48 2019 A. Algora Reference detector The reference detector was very noisy. The threshold has been changed from 2000 to 3200. We should look at this more carefully.      58   Mon May 27 09:12:22 2019 A. Algora Background, with AIDA Start: 17:13 Stop: 18:03 Rates: 1.8 kHz (Dynodes), 1.8 kHz      57   Mon May 27 08:26:20 2019 A. Algora Co source on top of Aida Start: 16:28 Stop: 17:03 Rates: 14.4 kHz (Dinodes), 12.8      56   Mon May 27 07:34:58 2019 A. Algora HV status EMPTY00    │   0.0 V 1500.0 uA    0.5 V    0.5 uA Off                     55   Mon May 27 07:18:26 2019 A. Algora AIDA Plastik Nishimura san found the module used for the AIDA plastik in the last BRIKEN run. We put it instead of the TFA. It was kept      54   Mon May 27 07:15:06 2019 A. Algora 137Cs run, AIDA out, source in the center Start: 15:15 Stop: 15:31 Lmd: 137Cs_source_201905271514_187.dlt      53   Mon May 27 07:11:22 2019 A. Algora detectors realigned with Cs Small alignment corrections were needed, of the order of 0.5-1V. All detectors were realigned      52   Sat May 25 07:04:52 2019 A. Algora Ancilliary card used channels until now For the moment there are three channels connected. Channel 5 is AIDA plastic,      51   Sat May 25 06:53:35 2019 A. Algora Background, no dlt files, last config file Start: 14:53 (May 25) Stop: 14: 37 (May 27) Root: 201905271437_background.root      50   Sat May 25 03:42:12 2019 A. Algora Background, no sources around, Aida out Start: 11:42 Stop: 14:45 Lmd: Background_201905251141_182.dlt      49   Sat May 25 02:11:09 2019 A. Algora 60Co source, red box, no sources around, No AIDA Start: 10:27 Stop: 11:31 Root: 201905251131_60co.root      48   Fri May 24 12:32:48 2019 A. Algora Background measurement, no sources around Start: 20:32 Stop: 10:05 Lmd: Background_201905242032_111.dlt      47   Fri May 24 10:57:37 2019 A. Algora 60Co, AIDA out, possitioned 5 mm deeper Start: 18:58 Stop: 20:20 Lmd:  60Co_source_201905241858_095.dlt      46   Fri May 24 09:43:49 2019 A. Algora 137Cs source, AIDA out, to check assymetry Start: 17:43 Stop: 18:51 Root: 201905241851_137Cs.root      45   Fri May 24 08:33:52 2019 A. Algora background, AIDA is out Start: 16:35 Stop: 17:30 Rates: 1.5 kHz (Dynodes), 1.8 kHz      44   Fri May 24 07:57:51 2019 A. Algora Lead shielding heigth increased The aluminium plate of 3 cm thickness arrived and the lead shielding was dismounted and mounted again. We left a narrower hole in      43   Fri May 24 06:25:14 2019 A. Algora Background assymetry Some pictures after the background during the nigth. The front and back side looks asymetric. To be checked again with a 137Cs      42   Thu May 23 04:18:57 2019 A. Algora SY2527 fixed Following the instructions of CAEN, the SY2527 is working again. Some pushing, massaging appear to solve the situation      41   Thu May 23 03:06:15 2019 A. Algora 133Ba source of red box too strong The Ba source of the red box is too strong. We can not use it. I need to identify the other one, which does not appear to be in      40   Thu May 23 02:48:29 2019 A. Algora 137Cs short run with AIDA in Start: 10:48 Stop: 10:58 Root: 201905231058_137Cs_with_Aida.root      39   Wed May 22 09:44:57 2019 A. Algora Background with AIDA in Start: 17:46 Stop: 10:14 (next day) Lmd: Background_AIDA_201905221746_075.dlt      38   Wed May 22 09:01:43 2019 A. Algora 60Co (source CD 395) with AIDA in Start: 17:00 Stop: 17:40 Lmd:  Co60_source_AIDA_201905221700_072.dlt      37   Wed May 22 07:55:23 2019 A. Algora Background with Aida in Start: 15:55 Stop: 16:55 Lmd: Background_AIDA_201905221555_071.dlt      36   Wed May 22 07:15:00 2019 A. Algora 137Cs (4763) with AIDA in Start: 15:15 Stop: 15:50 Lmd:  Cs137_source_AIDA_201905221515_069.dlt      35   Wed May 22 06:31:54 2019 A. Algora 137Cs quick test of alignment Start: 14:32 Stop: 14:37 Source: 137Cs      34   Tue May 21 12:04:10 2019 A. Algora background without listmode Start: 20:04 Stop: 14:11 Rates: 1.8 (Dynodes) 2.0 kHz (anodes)      33   Tue May 21 10:54:24 2019 A. Algora Background Start: 18:55 Stop: 20:01 Lmd: Background_201905211855_068.dlt      32   Tue May 21 09:52:43 2019 A. Algora Background Start: 17:53 Stop: 18:53 Rates: 1.8 kHz (dynodes),       31   Tue May 21 08:55:20 2019 A. Algora 152Eu, source ID 272 Start: 16:56 Stop: 17:46 Rates: 12.6 kHz (dynodes), 12 kHz      30   Tue May 21 07:50:03 2019 A. Algora Background Start: 15:49 Stop: 16:49 Lmd: Background_201905211549_063.dlt      29   Tue May 21 07:07:36 2019 A. Algora 22Na, source 700 Start: 15:08 Stop: 15:42 Rates: 19 kHz (Dynodes), 16 kHz      28   Tue May 21 06:44:18 2019 A. Algora identified useful sources This is a short list of the identified useful sources: 60Co, key 3, red box, CD 395, already      27   Tue May 21 06:12:13 2019 A. Algora Co again, to have a root file, source CD395 Start: 14:11 Stop: 15:01 Lmd: Co60_source_201905211411_055.dlt      26   Tue May 21 03:35:10 2019 A. Algora Background Start: 11:34 Stop: 13:52 Rates: 1.7 kHz (Dynodes) 2.0 kHz      25   Tue May 21 02:20:26 2019 A. Algora Cs measurement, Cs401, 4763 Start: 10:25 Stop: 11:26 lmd: Cs137_source_201905211025_052.dl      24   Mon May 20 12:29:05 2019 A. Algora background Start: 20:30 Stop: 09:54 Lmd: Background_201905202030_046.dlt      23   Mon May 20 10:02:43 2019 A. Algora 60Co again, with better threshold settings Start: 18:06 Stop: 20:20 Rates: 14 kHz (Dynodes) 12.7 kHz      22   Mon May 20 09:39:23 2019 A. Algora Dynode 08 threshold changed Dynode 08 threshold was changed from 675 to 790. Now the rate in this detector is fine.      21   Mon May 20 08:15:24 2019 A. Algora background Start: 16:25 Stop: 17:25 Background in the same conditions      20   Mon May 20 07:07:59 2019 A. Algora Co source (CD 395) Start: 15:10 Stop: 16:08 Positioned in the center, with      19   Mon May 20 06:55:15 2019 A. Algora New config file after calibration A file with Co and Cs was collected for 10 min 201905201444_137Cs60Co_align.root      18   Mon May 20 06:31:53 2019 A. Algora gain correction Only a very small correction was needed (at the level of 0.5 V) for the raw spectra of det 6,12,13,17 (raw Dynodes)      17   Mon May 20 06:04:41 2019 A. Algora Co and Cs short file Short file with the strong Co source and Cs source. To test stability Start:11:32      16   Mon May 20 03:18:03 2019 A. Algora Co and Cs after two days We have been running with Co and Cs for the weekend to check the overall stability. Seems that the detectors did not      15   Sat May 18 01:41:45 2019 Nacher, Algora gain check after the night Only PM3 showed an small jump. It seems that it has moved. Even after changing the HV cable. We will pay attention to it in      14   Thu May 16 06:59:51 2019 Algora Kiss Nacher Det 3 Det 3 moved, both Anode and Dynode. So we have changed the HV cable to test if there are no more jumps. We used cable 9 and it      12   Thu May 16 02:57:15 2019 Nacher, Algora threshold dynode #13 increased Threshold of dynode #13 changed from 500 to 700 because of a very high noise. New configuration file: 20190516_Conf.xlsx      11   Thu May 16 02:02:24 2019 Algora Kiss Nacher detector 3 moved over night After the long background measurement we have measured 60Co to check alignment.  Everything looks fine except for detector      10   Wed May 15 11:53:17 2019 Algora, Nacher, Kiss Background Start: 20:05 Stop: 09:44 Background rate 2.9 kHz (Dynodes),      9   Wed May 15 11:50:04 2019 Algora, Nacher 137Cs listmode, and rootfile 137Cs source in the center of the DTAS, with the IFIC holder list mode files: Cs137_Source_20190515_000.dlt      8   Wed May 15 09:57:54 2019 Nacher root file with 60Co and 137Cs For JL to play...      7   Wed May 15 08:11:46 2019 Tolosa, Nacher, Algora, Kiss Energy resolutions Using getSigmaCal.cxx macro to check energy resolutions...      6   Wed May 15 07:48:08 2019 Kiss Algora Nacher Saturation and pulser Saturation and pulser position after calibration EDy1 16801 25000      5   Wed May 15 06:53:52 2019 Nacher Kiss Algora HV setting EMPTY00      │0.0    V 1500.0 uA    0.5 V    0.5 uA Off                     4   Wed May 15 06:40:16 2019 Algora, Kiss, Nacher DTAS aligned and calibrated Signal cables (long cables, from preamp to digitizer) of channels 13 and 16 were changed. For the moment they have not been      3   Wed May 15 04:03:23 2019 JAR Synchronization with AIDA working Synchronization with AIDA is working, see attached document to proceed.      2   Tue May 14 13:16:33 2019 JLT Hardware setup    11x    1   Tue May 14 09:41:24 2019 TD Welcome to the DTAS Elog

Goto page 1, 2, 3 ... 6, 7, 8

ELOG V3.1.4-unknown