ID |
Date |
Author |
Subject |
Text |
|
12
|
Thu May 16 02:57:15 2019 |
Nacher, Algora | threshold dynode #13 increased | Threshold of dynode #13 changed from 500 to
700 because of a very high noise.
New configuration file: 20190516_Conf.xlsx |
|
100
|
Fri Jun 7 02:50:40 2019 |
SN, AA | test of 24Na | Start: 10:49
Stopt: 11:04
Lmd: 201906071049_24Na_AIDA_242.dlt |
7x |
105
|
Sat Jun 8 04:38:30 2019 |
Nacher, Algora, Tain, Molina | source top and bottom | 137Cs top and bottom test... to check differences
we positiones the source at the top and bottom
of AIDA respectively. |
|
106
|
Sun Jun 9 03:59:40 2019 |
Many | some cable changes | The cable of detector 8 was changed (long
cable) to reduce the noise. The cable (long)
of the reference detector was also changed. |
|
120
|
Sat Jun 15 18:15:08 2019 |
Pancho& Kike | run 9 | Shifters: Pancho & Kike
Degrader: none
|
9x |
121
|
Sat Jun 15 18:38:15 2019 |
Pancho & Kike | run 12 | Shifters: Pancho & Kike
Degrader: none
|
|
133
|
Sun Jun 16 19:18:15 2019 |
Ela, Victor | root files from run 30 to run 45 | |
6x |
122
|
Sat Jun 15 18:39:07 2019 |
Pancho & Kike | root files | 100Sn root files corresponding to runs 06,07,08
(190616_0030_100Sn_008.root) and runs 09,10,11
(190616_0230_100Sn_011.root) two hours each |
|
8
|
Wed May 15 09:57:54 2019 |
Nacher | root file with 60Co and 137Cs | For JL to play... |
|
124
|
Sat Jun 15 22:43:20 2019 |
Pancho & Kike | root file data 4:30 - 6:30 | corresponding to runs .dlt 15-17
|
|
123
|
Sat Jun 15 20:43:50 2019 |
Pancho & Kike | root file data 2:30 - 4:30 | corresponding to runs .dlt 12-14 |
|
128
|
Sun Jun 16 03:42:17 2019 |
Ela, Sonja, Victor | root file 8:30-10:30 | |
|
125
|
Sun Jun 16 00:52:27 2019 |
Ela, Sonja, Victor | root file 6:30-8:30 | |
|
139
|
Sun Jun 16 23:37:47 2019 |
Ela, Victor | root file 5:30-7:30 | |
|
135
|
Sun Jun 16 21:44:38 2019 |
Ela, Victor | root file 3:30-5:30 | |
|
138
|
Sun Jun 16 23:37:18 2019 |
Ela, Victor | root file 3:30-5:30 | |
|
134
|
Sun Jun 16 21:43:36 2019 |
Ela, Victor | root file 1:30-3:30 | |
|
130
|
Sun Jun 16 06:55:31 2019 |
Ela, Sonja, Victor | root file 12:30-14:30 | |
|
129
|
Sun Jun 16 04:44:05 2019 |
Ela, Sonja, Victor | root file 10:30-12:30 | The beam stopped a couple of times due to
problems before RRC |
|
137
|
Sun Jun 16 22:56:41 2019 |
Victor | rates modules in coincidence with F11 |
Module Rate cps Rate coin. F11 cps Difference
cps
|
|
131
|
Sun Jun 16 07:08:10 2019 |
Ela, Sonja, Victor, Alejandro | problems in coincidence crystals-F11 | We have noticed that there is a problems in
the coincidence Crystals-F11. The TAC shows
a lot of counts. The
|
|
60
|
Mon May 27 13:50:54 2019 |
A. Algora | preparation directory moved | The preparation directory was moved to
/data/DRikenPreparation (from its first place
/home/dacq/DRikenPreparation) because the |
|
98
|
Thu Jun 6 09:36:52 2019 |
Alvaro, Jorge, Ale | new config file | New config file: 20190606_Conf.xlsx
Changed with respect to the earlier file |
|
99
|
Fri Jun 7 01:55:24 2019 |
CA, JA , AT | merger test | Setup: On 17th-May (11:18 - 11:38), AIDA was
inside DTAS. Measurement of 60Co source.
|
|
68
|
Wed May 29 08:29:26 2019 |
A. Algora | latest conf file | Latest configuration file from 28 of May |
|
28
|
Tue May 21 06:44:18 2019 |
A. Algora | identified useful sources | This is a short list of the identified
useful sources:
60Co, key 3, red box, CD 395, already |
|
18
|
Mon May 20 06:31:53 2019 |
A. Algora | gain correction | Only a very small correction was needed
(at the level of 0.5 V) for the raw spectra
of det 6,12,13,17 (raw Dynodes) |
|
15
|
Sat May 18 01:41:45 2019 |
Nacher, Algora | gain check after the night | Only PM3 showed an small jump. It seems
that it has moved. Even after changing the
HV cable. We will pay attention to it in |
|
107
|
Sun Jun 9 04:03:38 2019 |
Jorge, Jose, Pancho, Alvaro, Kike, Ale | effect of the pulser in the low energy part of the anodes | There is an effect if the pulser is at
higher frequency in the low energy part of
the anodes (apart from the funny situation |
|
53
|
Mon May 27 07:11:22 2019 |
A. Algora | detectors realigned with Cs | Small alignment corrections were needed,
of the order of 0.5-1V.
All detectors were realigned |
|
11
|
Thu May 16 02:02:24 2019 |
Algora Kiss Nacher | detector 3 moved over night | After the long background measurement we have
measured 60Co to check alignment.
Everything looks fine except for detector |
|
79
|
Thu May 30 12:08:01 2019 |
A. Algora | background, dacq restarted before the measurement | Start: 20:09
Stop: 10:17
Root: 201905311017_background_AIDA_in.root |
|
116
|
Mon Jun 10 13:02:16 2019 |
Jose, Pancho, Ale | background, Aida in | Start: 21:03
Stop: 09:30
|
8x |
45
|
Fri May 24 08:33:52 2019 |
A. Algora | background, AIDA is out | Start: 16:35
Stop: 17:30
Rates: 1.5 kHz (Dynodes), 1.8 kHz |
|
34
|
Tue May 21 12:04:10 2019 |
A. Algora | background without listmode | Start: 20:04
Stop: 14:11
Rates: 1.8 (Dynodes) 2.0 kHz (anodes) |
|
97
|
Tue Jun 4 06:27:55 2019 |
A. Algora (++Jorge,++ Alvaro) | background with no beam | Start: 14:25
Stop: 14:39 (partial, no beam,
not erased), 14:58 (partial, no beam, not |
|
88
|
Sat Jun 1 10:04:54 2019 |
A. Algora | background with beam | Start: 18:05
Stop: 22:27
Comments: Rate at F7: 3,3 kHz, |
|
118
|
Wed Jun 12 02:04:07 2019 |
AA, EN, PM, AT | background during in-beam exp. | In-beam experiment going on. Only 12h of beam
in the last 21h.
|
|
21
|
Mon May 20 08:15:24 2019 |
A. Algora | background | Start: 16:25
Stop: 17:25
Background in the same conditions |
|
24
|
Mon May 20 12:29:05 2019 |
A. Algora | background | Start: 20:30
Stop: 09:54
Lmd: Background_201905202030_046.dlt |
|
117
|
Tue Jun 11 01:45:55 2019 |
Pancho, Ale | background |
Start: 09:46
|
|
1
|
Tue May 14 09:41:24 2019 |
TD | Welcome to the DTAS Elog | |
|
127
|
Sun Jun 16 02:07:29 2019 |
Victor | Total sum (black) and anodes | Different cuts at high energy in individual
spectra (anodes) and effect in the total
sum |
|
143
|
Mon Jun 17 19:12:33 2019 |
Victor | Total SUM in coincidence with AIDA Plastic | Also TAC DTAS-Plastic AIDA |
|
132
|
Sun Jun 16 07:31:01 2019 |
Victor | The bump in the mutiplicities | We have calculated the spectra of the module
multiplicity for each side (careful! the
maximum is 8, since it is
|
8x |
110
|
Mon Jun 10 08:07:17 2019 |
Ale, Jose | Test of pulser count rates | File: 20190610_1602_background_AIDA_in.root
SyncPulse: 61777
|
|
142
|
Mon Jun 17 19:11:06 2019 |
Victor | TAC slowest module vs fastest module DTAS | Inside events of 320ns window |
|
81
|
Fri May 31 06:48:58 2019 |
A. Algora | T spectra for AIDA and F11 plastics | T spectra for AIDAPL and F11PLL and F11PLR
are defined from now on. The ancilliary card
was not saving the CFD values for all channels. |
|
3
|
Wed May 15 04:03:23 2019 |
JAR | Synchronization with AIDA working | Synchronization with AIDA is working, see
attached document to proceed. |
|
136
|
Sun Jun 16 22:02:45 2019 |
Victor | Sum in coincidence with F11 | TAC DTAS (slowest module of the sum) and F11
Total sum in coincidence with F11
|
|
6
|
Wed May 15 07:48:08 2019 |
Kiss Algora Nacher | Saturation and pulser | Saturation and pulser position after calibration
EDy1 16801 25000
|
|
42
|
Thu May 23 04:18:57 2019 |
A. Algora | SY2527 fixed | Following the instructions of CAEN, the
SY2527 is working again. Some pushing, massaging
appear to solve the situation |
|
62
|
Tue May 28 05:30:03 2019 |
A. Algora | Reference detector threshold changed | Again the Reference detector was firing
mainly in the noise. Threshold increased
to 5000 !!!! |
|
59
|
Mon May 27 12:54:48 2019 |
A. Algora | Reference detector | The reference detector was very noisy.
The threshold has been changed from 2000
to 3200. We should look at this more carefully. |
|
72
|
Thu May 30 02:03:33 2019 |
A. Algora | Ref detector position changed, AIDA plastik HV changed | The position of the reference detector
in the ancilliary card was changed from channel
10 to channel 9. Remember that this is important |
|
70
|
Wed May 29 09:49:25 2019 |
A. Algora | New configuration file | New configuration file after a few small
changes in thresholds. |
|
94
|
Mon Jun 3 12:56:06 2019 |
A. Algora | New configuration file | The E range of the AIDA plastic for the
construction of the TAIDA plastic spectrum
has been changed. Also the range of the TAC_AIDAPL_CryA |
|
19
|
Mon May 20 06:55:15 2019 |
A. Algora | New config file after calibration | A file with Co and Cs was collected for
10 min
201905201444_137Cs60Co_align.root |
|
84
|
Fri May 31 14:17:13 2019 |
A. Algora | New config file | A new config file provided by Jose and
Alvaro is loaded
cp 20190531_Conf_JLTAT.xlsx 20190531_Conf_2.xlsx |
|
114
|
Mon Jun 10 12:31:52 2019 |
Ale, Jose | New calibration | New calibration with more statistics
File: 20190610_2030_60Co_137Cs_AIDA_in.root
|
|
109
|
Mon Jun 10 04:18:24 2019 |
Ale, Jose | New Configuration File | File: 20190610_1145_Conf_DTAS.xlsx
Several changes and corrections
|
|
115
|
Mon Jun 10 12:48:01 2019 |
Ale, Jose | New Config file | Conf file with new calibration:
20190610_2035_Conf_DTAS.xlsx
|
6x |
113
|
Mon Jun 10 10:44:36 2019 |
Ale, Jose | New Conf file with new calibration | File: 20190610_1835_Conf_DTAS.xlsx |
|
126
|
Sun Jun 16 01:36:08 2019 |
Victor | Mm 100Sn beam | |
|
141
|
Mon Jun 17 06:28:06 2019 |
Victor | MC number of implants | Counts in DTAS
Proposal 2730
4 days 888
|
|
96
|
Tue Jun 4 06:25:51 2019 |
A. Algora | Lead shielding was "upgraded" | With the help of Tom the additional lead
pieces were put. So now the hole in the lead
shielding matches the hole in the polyethylene |
|
44
|
Fri May 24 07:57:51 2019 |
A. Algora | Lead shielding heigth increased | The aluminium plate of 3 cm thickness arrived
and the lead shielding was dismounted and
mounted again. We left a narrower hole in |
|
66
|
Wed May 29 02:07:20 2019 |
A. Algora | Irradiation for 24Na | Irradiation of two pieces of aluminium
of 80 mm x 40 mm x 10 mm will be performed
at the second BigRips dipole. |
|
2
|
Tue May 14 13:16:33 2019 |
JLT | Hardware setup | |
11x |
56
|
Mon May 27 07:34:58 2019 |
A. Algora | HV status | EMPTY00 │
0.0 V 1500.0 uA 0.5 V
0.5 uA Off |
|
5
|
Wed May 15 06:53:52 2019 |
Nacher Kiss Algora | HV setting | EMPTY00 │0.0
V 1500.0 uA 0.5 V
0.5 uA Off |
|
111
|
Mon Jun 10 09:58:42 2019 |
Jose, Ale | Gain matching | We have corrected small gain changes by changing
the HV of detectors. Attached are the new
values |
|
67
|
Wed May 29 07:04:19 2019 |
A. Algora | F11 plastic connected | F11 plastic has been connected to our dacq
as it was in the earlier BRIKEN setting.
The detector cables were followed |
|
7
|
Wed May 15 08:11:46 2019 |
Tolosa, Nacher, Algora, Kiss | Energy resolutions |
Using getSigmaCal.cxx macro to check energy
resolutions...
|
|
22
|
Mon May 20 09:39:23 2019 |
A. Algora | Dynode 08 threshold changed | Dynode 08 threshold was changed from 675
to 790. Now the rate in this detector is
fine. |
|
14
|
Thu May 16 06:59:51 2019 |
Algora Kiss Nacher | Det 3 | Det 3 moved, both Anode and Dynode. So
we have changed the HV cable to test if there
are no more jumps. We used cable 9 and it |
|
4
|
Wed May 15 06:40:16 2019 |
Algora, Kiss, Nacher | DTAS aligned and calibrated | Signal cables (long cables, from preamp
to digitizer) of channels 13 and 16 were
changed. For the moment they have not been |
|
25
|
Tue May 21 02:20:26 2019 |
A. Algora | Cs measurement, Cs401, 4763 | Start: 10:25
Stop: 11:26
lmd: Cs137_source_201905211025_052.dl |
|
102
|
Fri Jun 7 09:37:15 2019 |
The same team | Cs for the AIDA synch test | Start: 17:41
Stop: 18:17
AIDA files: R19_1 (@17:57) |
|
103
|
Fri Jun 7 12:35:14 2019 |
Jorge, Alvaro | Correlation time AIDA_DTAS for 60Co source | Files at mars /home/briken/190607AidaTasTest60Co |
|
101
|
Fri Jun 7 08:47:17 2019 |
Jorge, Alvaro, Tom, Sunghan, Ale | Co source, test of AIDA/TAS syncronization | Start: 16:50
Stop: 17:28
Root: 201906071728_60Co_AIDA_in.root |
|
57
|
Mon May 27 08:26:20 2019 |
A. Algora | Co source on top of Aida | Start: 16:28
Stop: 17:03
Rates: 14.4 kHz (Dinodes), 12.8 |
|
20
|
Mon May 20 07:07:59 2019 |
A. Algora | Co source (CD 395) | Start: 15:10
Stop: 16:08
Positioned in the center, with |
|
17
|
Mon May 20 06:04:41 2019 |
A. Algora | Co and Cs short file | Short file with the strong Co source and
Cs source. To test stability
Start:11:32 |
|
112
|
Mon Jun 10 10:01:17 2019 |
Jose, Ale | Co and Cs for new calibration | Start: 17:57 ?
Stop:18:15
|
|
16
|
Mon May 20 03:18:03 2019 |
A. Algora | Co and Cs after two days | We have been running with Co and Cs for
the weekend to check the overall stability.
Seems that the detectors did not |
|
27
|
Tue May 21 06:12:13 2019 |
A. Algora | Co again, to have a root file, source CD395 | Start: 14:11
Stop: 15:01
Lmd: Co60_source_201905211411_055.dlt |
|
87
|
Sat Jun 1 08:25:47 2019 |
A. Algora | Background, without and with beam | Start: 16:26
Stop: 17:20 (until then no beam),
Root1: 201906011720_background_AIDA_in.root |
7x |
58
|
Mon May 27 09:12:22 2019 |
A. Algora | Background, with AIDA | Start: 17:13
Stop: 18:03
Rates: 1.8 kHz (Dynodes), 1.8 kHz |
|
50
|
Sat May 25 03:42:12 2019 |
A. Algora | Background, no sources around, Aida out | Start: 11:42
Stop: 14:45
Lmd: Background_201905251141_182.dlt |
|
61
|
Mon May 27 13:58:03 2019 |
A. Algora | Background, no lmd, AIDA in, no sources around | Start: 21:59
Stop: 13:15 (next day, 28/05)
Rates: 1.9-2.3 (dynodes), 1.8-1.9 |
|
71
|
Wed May 29 10:01:10 2019 |
A. Algora | Background, no lmd, AIDA in | Start: 18:02
Stop: 18:33, partial file (201905291833_background_AIDA_in.root),
Stop: 09:53 saved also next day (30/05) 201905300953_background_AIDA_in.root |
|
65
|
Tue May 28 07:49:51 2019 |
A. Algora | Background, no lmd | Start: 15:50
Stop: 10:09 (next day)
Root: 201905291009_background_AIDA_in.root |
|
51
|
Sat May 25 06:53:35 2019 |
A. Algora | Background, no dlt files, last config file | Start: 14:53 (May 25)
Stop: 14: 37 (May 27)
Root: 201905271437_background.root |
|
92
|
Mon Jun 3 01:45:31 2019 |
A. Algora | Background, no beam for a period | Start: 09:45
Stop (partial save): 09:55, 10:00,
10:14,10:29,10:37,10:46 |
|
78
|
Thu May 30 08:57:34 2019 |
A. Algora | Background, no beam + beam, file not saved | Start: 16:57
Stop:
Comments: first part no beam, but |
|
86
|
Sat Jun 1 07:59:20 2019 |
A. Algora | Background, no beam | Start: approximate 15:54
Stop: 16:23
Root: 201906011624_background_AIDA_in.root |
|
73
|
Thu May 30 02:44:56 2019 |
A. Algora | Background, just a test | Start: 11:01
Stop: 13:37
Root: 201905301337_background_AIDA_in.root |
|
82
|
Fri May 31 07:03:37 2019 |
A. Algora | Background, beam on, rates at F11PL and AIDAPL | Start: 15:04
Stop: partial (17:43), 201905311743_background_AIDA_in.root
(file corrupt again), system will be restarted |
|
95
|
Mon Jun 3 12:59:31 2019 |
A. Algora | Background, beam on, 102Sn coulex | Start: 21:00
Stop: 14:24 (next day)
Root: 201906041423_background_AIDA_in.root |
|
80
|
Fri May 31 02:41:55 2019 |
A. Algora | Background, beam on | Start: 10:42
Stop: 11:49
Root: 201905311149_background_AIDA_in.root |
7x |
89
|
Sat Jun 1 14:31:24 2019 |
A. Algora | Background, beam on | Start: 22:32
Stop: 19:18 (next day)
Comments: According to Tom, the |
|
91
|
Sun Jun 2 12:31:45 2019 |
A. Algora | Background, beam on | Start: 20:32
Stop: 09;44
Root: 201906030944_background_AIDA_in.root |
|
93
|
Mon Jun 3 03:37:10 2019 |
A. Algora | Background, beam on | Start:11:36
Stop: 20:47
Root: 2019060312047_background_AIDA_in.root |
|
64
|
Tue May 28 06:13:27 2019 |
A. Algora | Background, Aida in | Start: 14:13
Stop: 15:47
Lmd: Background_AIDA_in_201905281413_231.dlt |
|
90
|
Sun Jun 2 11:23:23 2019 |
A. Algora | Background, beam on | Start: 19:24
Stop: 20:27
Root: 201906022028_background_AIDA_in.root |
|
74
|
Thu May 30 06:41:18 2019 |
A. Algora | Background with the beam | There was an small increase in the counting
rate of the detectors after the beam was
delivered. The rate at |
|
76
|
Thu May 30 07:21:41 2019 |
A. Algora | Background with beam on | Start: 15:21
Stop: 16:41
Root: 201905301642_background_AIDA_in.root |
|
75
|
Thu May 30 06:46:10 2019 |
A. Algora | Background with beam | Again a new test with the beam on. At the
begining the beam was off and it can be noticed.
There is a lead wall after F11 |
|
85
|
Fri May 31 14:29:34 2019 |
A. Algora | Background with beam | Start: 22:29
Stop: 15:44 (next day)
Root: 201906011544_background_AIDA_in.root |
|
37
|
Wed May 22 07:55:23 2019 |
A. Algora | Background with Aida in | Start: 15:55
Stop: 16:55
Lmd: Background_AIDA_201905221555_071.dlt |
|
39
|
Wed May 22 09:44:57 2019 |
A. Algora | Background with AIDA in | Start: 17:46
Stop: 10:14 (next day)
Lmd: Background_AIDA_201905221746_075.dlt |
|
77
|
Thu May 30 08:43:29 2019 |
A. Algora | Background no beam | Start: 16:43
Stop: 16:56
Root: 201905301656_background_AIDA_in.root |
|
48
|
Fri May 24 12:32:48 2019 |
A. Algora | Background measurement, no sources around | Start: 20:32
Stop: 10:05
Lmd: Background_201905242032_111.dlt |
|
108
|
Mon Jun 10 04:14:39 2019 |
Ale, Jose | Background measurement overnight | Start:~14:00 (June 9)
Stop:10:30
|
|
43
|
Fri May 24 06:25:14 2019 |
A. Algora | Background assymetry | Some pictures after the background during
the nigth. The front and back side looks
asymetric. To be checked again with a 137Cs |
|
10
|
Wed May 15 11:53:17 2019 |
Algora, Nacher, Kiss | Background | Start: 20:05
Stop: 09:44
Background rate 2.9 kHz (Dynodes), |
|
26
|
Tue May 21 03:35:10 2019 |
A. Algora | Background | Start: 11:34
Stop: 13:52
Rates: 1.7 kHz (Dynodes) 2.0 kHz |
|
30
|
Tue May 21 07:50:03 2019 |
A. Algora | Background | Start: 15:49
Stop: 16:49
Lmd: Background_201905211549_063.dlt |
|
32
|
Tue May 21 09:52:43 2019 |
A. Algora | Background | Start: 17:53
Stop: 18:53
Rates: 1.8 kHz (dynodes), |
|
33
|
Tue May 21 10:54:24 2019 |
A. Algora | Background | Start: 18:55
Stop: 20:01
Lmd: Background_201905211855_068.dlt |
|
83
|
Fri May 31 09:49:08 2019 |
A. Algora | Backgroun, beam on | Start: 17:49
Stop: 22:11
Root: 201905312211_background_AIDA_in.root |
|
52
|
Sat May 25 07:04:52 2019 |
A. Algora | Ancilliary card used channels until now | For the moment there are three channels
connected.
Channel 5 is AIDA plastic, |
|
144
|
Wed Jun 19 05:10:15 2019 |
Alvaro | Aida plastic - gain change | TAC AIDAPL - CryA changed
After increasing the gain, x2 peaks in TAC |
|
69
|
Wed May 29 09:08:11 2019 |
A. Algora | AIDA plastic setting changed | AIDA plastic changed.
HV was at 1000 V, it was changed
to 1300 V |
|
104
|
Sat Jun 8 04:22:39 2019 |
Jorge Alvaro | AIDA TAS correlation with 137Cs | Files at mars /home/briken/190607AidaTasTest137Cs
For this experiment TAS Signal is stored
|
|
119
|
Fri Jun 14 16:22:25 2019 |
AT, OH, JA, CG, TD | AIDA Sync | Problem with the sync checker appeared AIDA
was not its notmal 14us out from DTAS.
|
|
55
|
Mon May 27 07:18:26 2019 |
A. Algora | AIDA Plastik | Nishimura san found the module used for
the AIDA plastik in the last BRIKEN run.
We put it instead of the TFA. It was kept |
|
47
|
Fri May 24 10:57:37 2019 |
A. Algora | 60Co, AIDA out, possitioned 5 mm deeper | Start: 18:58
Stop: 20:20
Lmd: 60Co_source_201905241858_095.dlt |
|
49
|
Sat May 25 02:11:09 2019 |
A. Algora | 60Co source, red box, no sources around, No AIDA | Start: 10:27
Stop: 11:31
Root: 201905251131_60co.root |
|
23
|
Mon May 20 10:02:43 2019 |
A. Algora | 60Co again, with better threshold settings | Start: 18:06
Stop: 20:20
Rates: 14 kHz (Dynodes) 12.7 kHz |
|
38
|
Wed May 22 09:01:43 2019 |
A. Algora | 60Co (source CD 395) with AIDA in | Start: 17:00
Stop: 17:40
Lmd: Co60_source_AIDA_201905221700_072.dlt |
|
29
|
Tue May 21 07:07:36 2019 |
A. Algora | 22Na, source 700 | Start: 15:08
Stop: 15:42
Rates: 19 kHz (Dynodes), 16 kHz |
|
31
|
Tue May 21 08:55:20 2019 |
A. Algora | 152Eu, source ID 272 | Start: 16:56
Stop: 17:46
Rates: 12.6 kHz (dynodes), 12 kHz |
|
46
|
Fri May 24 09:43:49 2019 |
A. Algora | 137Cs source, AIDA out, to check assymetry | Start: 17:43
Stop: 18:51
Root: 201905241851_137Cs.root |
|
40
|
Thu May 23 02:48:29 2019 |
A. Algora | 137Cs short run with AIDA in | Start: 10:48
Stop: 10:58
Root: 201905231058_137Cs_with_Aida.root |
|
54
|
Mon May 27 07:15:06 2019 |
A. Algora | 137Cs run, AIDA out, source in the center | Start: 15:15
Stop: 15:31
Lmd: 137Cs_source_201905271514_187.dlt |
|
35
|
Wed May 22 06:31:54 2019 |
A. Algora | 137Cs quick test of alignment | Start: 14:32
Stop: 14:37
Source: 137Cs |
|
9
|
Wed May 15 11:50:04 2019 |
Algora, Nacher | 137Cs listmode, and rootfile | 137Cs source in the center of the DTAS,
with the IFIC holder
list mode files: Cs137_Source_20190515_000.dlt |
|
36
|
Wed May 22 07:15:00 2019 |
A. Algora | 137Cs (4763) with AIDA in | Start: 15:15
Stop: 15:50
Lmd: Cs137_source_AIDA_201905221515_069.dlt |
|
63
|
Tue May 28 05:43:41 2019 |
A. Algora | 133Ba source. (IR052 from the third floor) | Start: 13:43
Stop: 14:05
Comments: The source looks also |
|
41
|
Thu May 23 03:06:15 2019 |
A. Algora | 133Ba source of red box too strong | The Ba source of the red box is too strong.
We can not use it. I need to identify the
other one, which does not appear to be in |
|