ID |
Date |
Author |
Subject |
Text |
 |
947
|
Tue Apr 1 15:34:16 2025 |
TD, MR, CU | Tests of new AIDA ASIC mezzanines - 2024 production batch |
Tests of new AIDA ASIC mezzanines - 2024
production batch
|
11x |
946
|
Wed Apr 10 16:45:59 2024 |
TD | AIDA interlock |
Honeywell HSS DPS sensor information https://elog.ph.ed.ac.uk/AIDA/932
|
|
945
|
Fri Mar 29 08:39:18 2024 |
TD, PJCS | Unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) | >
> At AIDA test station T9, STFC DL unable
to start MIDAS DAQ with 1x FEE64 ( aida04 |
|
944
|
Thu Mar 28 15:43:47 2024 |
TD | Unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) |
At AIDA test station T9, STFC DL unable to
start MIDAS DAQ with 1x FEE64 ( aida04 ) |
  |
943
|
Thu Mar 28 11:10:09 2024 |
TD | Test of 4x FEE64s at AIDA test station, T9, STFC DL | Test of 4x FEE64s at AIDA test station, T9,
STFC DL
|
22x |
942
|
Wed Mar 13 14:50:04 2024 |
NH | [HowTo] Backup and Restore Raspberry Pi SD Cards | Micro SD cards used by the raspberry pis are
cheap but prone to failing
|
|
941
|
Tue Jan 30 14:18:16 2024 |
NH | [HowTo] Update MACB Firmware | https://elog.ph.ed.ac.uk/CARME/482 |
|
940
|
Thu Dec 14 10:53:27 2023 |
NH, MP, CC, GA | Snout Removed | Snout removed from S4
All detectors removed
|
|
939
|
Mon Dec 11 23:56:36 2023 |
TD | Tuesday 12 December | 00.55 Observe high frequency noise in aida02
& aida04 ( n+n FEE64s ) - attachments 1-5
and aida05 ( p+n FEE64 )
|
18x |
938
|
Mon Dec 11 11:05:27 2023 |
TD | WR timestamp fail aida05 & aida07 |
MACB config
1x level 0
|
11x |
937
|
Mon Dec 11 09:57:54 2023 |
TD | Monday 11 December | Water flow and temperature ( gauges outside
S4 entrance ) OK
|
27x |
936
|
Sun Dec 10 13:06:27 2023 |
TD | Sunday 10 December | 14.05 S4 closed
Water flow and temperature ( gauges outside |
14x |
935
|
Fri Dec 8 12:55:38 2023 |
TD, NH | FEE64 configuration |
FEE64 configuration for 1x MSL type BB18(DS)-1000
24cm x 8cm DSSSD
|
|
934
|
Fri Dec 8 11:32:44 2023 |
NH, CC, VP, TD | Friday 8 December |
Change n+n FEE64 aida04 d8:80:39:41:f6:b7
asic #1 faulty
|
18x |
933
|
Thu Dec 7 17:30:36 2023 |
NH, CC, VP, TD | Thursday 7 December |
Stack re-assembled - upstream to downstream
|
8x |
932
|
Wed Dec 6 16:32:03 2023 |
NH | Replacement of faulty Honeywell HSS-DPS sensor |
Honeywell HSS-DPS sensor is faulty - attachments
1 & 2
|
   |
931
|
Mon Dec 4 10:34:48 2023 |
NH | AIDA Todo for 11.12.23 | This is a short list of things todo or check
before the test beam time on 11.12.23
Updated after 15:00 CET meeting
|
|
930
|
Fri Nov 24 10:36:06 2023 |
NH | Friday 24 November | Pulser LEMOs removed from p+n fees
Pulser connected to n+n fees: aida02 and
aida04
|
   |
929
|
Thu Nov 23 10:00:16 2023 |
NH | Report - Cannot change per-ASIC Settings | > On ASIC settings page trynig to change the
settings for one ASIC (e.g. ASIC1 of aida09)
seems to cause all 4 ASIC settings to change
|
   |
928
|
Wed Nov 22 15:12:40 2023 |
TD | /tmp/log8015_error | |
|
927
|
Wed Nov 22 14:52:43 2023 |
NH | AIDA Pulser Calibration | Connect pulser to all p+n FEEs
Turn on pulser, 100 Hz (attachment 3 for |
   |
926
|
Wed Nov 22 13:44:36 2023 |
NH | Report - Cannot change per-ASIC Settings | On ASIC settings page trynig to change the
settings for one ASIC (e.g. ASIC1 of aida09)
seems to cause all 4 ASIC settings to change
|
|
925
|
Tue Nov 21 13:56:59 2023 |
NH, CC, HA, MP, AM, VP | Tuesday 21 November | Connect the BB7 on top of the snout to the
former aida05 (FEE above aida01)
Also remove copper busbar that is unused
|
8x |
924
|
Sat Nov 18 02:28:26 2023 |
TD, NH, JB | Saturday 18 November | 03.20 c. 3k per spill 13N beam to S4
Observe scatter of events at all energies
for LEC
|
10x |
923
|
Fri Nov 17 15:53:03 2023 |
TD, JB, JG | Friday 17 November contd. |
AIDA ASIC settuings 2023Nov16-18.55.20
low comparator p+n FEE64s 0xa, n+n 0xf
|
25x |
922
|
Fri Nov 17 09:19:41 2023 |
TD, CC, VP | AIDA test 17/11/2023 | We restarted AIDA (a10277ttachment 6) this
morning and checked rates (attachments 3/4)
and waveforms (attachments 1/2). Temperatures |
46x |
921
|
Thu Nov 16 17:43:25 2023 |
TD, JB, CC, VP | AIDA test 16/11/2023 cont. | Screenshot uploads as I hit the 50 image
upload limit. |
   |
920
|
Thu Nov 16 09:09:58 2023 |
TD, JB, CC, VP | AIDA tests 16/11/2023 | Viewing AIDA status on Thursday morning 16/11/2023.
|
48x |
919
|
Wed Nov 15 10:37:00 2023 |
TD | Wednesday 15 November |
11.36 Water flow, pressure & temperature
( 19 deg C ) OK
|
27x |
918
|
Tue Nov 14 17:19:11 2023 |
TD | TapeServer, Merger, NetVar etc status | |
   |
917
|
Tue Nov 14 17:08:49 2023 |
TD | Report - high - unable to change ASIC settings directory in Options |
Attempting to change the text string specifying
the ASIC settings directory ( 2023Nov14-15.25.24 |
 |
916
|
Tue Nov 14 16:52:54 2023 |
TD | Tuesday 14 November |
15.06 Quick test of AIDA 24cm x 8cm 'triple'
DSSSD before dismounting to install 1x bPlast |
 |
915
|
Mon Nov 6 17:30:44 2023 |
NH | Aida Alpha Analysis | Analysis of tape folder /TapeData/BG18OCT23
Using Go4 https://github.com/cej25/DESPEC_NOV23
|
   |
914
|
Wed Oct 25 12:42:18 2023 |
CC | AIDA test | Started AIDA at 1:41 pm, writing to disk:
file BG18OCT2/R6, stopped at 17:26
pict1: HV supply
|
   |
913
|
Tue Oct 24 10:54:14 2023 |
at 19:14NH, CC | AIDA test | Started AIDA at 11:54am, writing to disk:
file BG18OCT2/R5, stopped at 19:14
|
   |
912
|
Mon Oct 23 14:08:06 2023 |
NH, CC | AIDA test | Started AIDA at 3:05pm, writing to disk: file
BG18OCT2/R4, stopped 18.30
|
    |
911
|
Mon Oct 23 10:52:06 2023 |
NH, CC | AIDA test | Started AIDA at 11:50, writing to disk: file
BG18OCT2/R3, stopped around 3 pm
|
   |
910
|
Thu Oct 19 10:39:20 2023 |
NH | Thursday 19 October | Water Temp: 20 C - Flow felt on pipe
AIDA interlock OVERRIDE
|
10x |
909
|
Wed Oct 18 17:18:57 2023 |
TD | Wednesday 18 October | |
8x |
908
|
Thu Oct 12 16:40:21 2023 |
TD | background alpha |
start 14.55 |
13x |
907
|
Thu Oct 12 13:02:50 2023 |
TD | Thursday 12 October contd. |
ASIC settings 2021Apr29-13-16-00
slow comparator 0xa ( all p+n junction |
50x |
906
|
Thu Oct 12 09:12:34 2023 |
TD | Thursday 12 October | 10.10 Water flow & temp OK
Power ON
|
47x |
905
|
Wed Oct 11 16:53:20 2023 |
TD | Wednesday 11 October contd. | CAEN N1419ET ch 2 - all outputs non-floating
( internal LK fitted )
Standard coaxial HV cable chained to |
14x |
904
|
Wed Oct 11 09:37:30 2023 |
TD | Wednesday 11 October |
10.00 Water flow & temp OK
Power ON
|
48x |
903
|
Tue Oct 10 08:38:37 2023 |
TD | Tuesday 10 October |
09.38 Water flow & temp OK
Power ON
|
40x |
902
|
Mon Oct 9 14:29:12 2023 |
TD | Monday 9 October contd. |
15.20 aida10 LK4 ( front f/p -> gnd ) fitted
- investigate impact aida10 asic #4 edge |
|
901
|
Mon Oct 9 09:03:10 2023 |
TD | Monday 9 October | 09.55 Water pressure and temp OK
Power on
|
50x |
900
|
Sun Oct 8 14:51:59 2023 |
TD | Sunday 8 October contd. |
Slow comparator 0xf
|
28x |
899
|
Sun Oct 8 11:44:35 2023 |
TD | Sunday 8 October | 12.22 USB-controlled ac mains relay - interlock
overidden
Water flow OK. Water temp 19 deg C |
50x |
898
|
Tue Oct 3 10:16:06 2023 |
TD | nnrpi2 scripts | pi@raspberrypi:~ $ cat ./caen_screen.sh
if ! screen -list | grep -q "caenhv"; then
screen -f -S caenhv /dev/ttyACM0 9600
|
|
897
|
Tue Oct 3 09:14:59 2023 |
TD | Tuesday 3 October |
09.45 Power up
|
 |
896
|
Mon Oct 2 14:03:42 2023 |
TD | Monday 2 October |
15.00 DSSSD bias +60V +6.44uA - breakdown
above c. 60V, bias +100V leakage current |
  |
895
|
Sun Oct 1 12:38:56 2023 |
TD | Sunday 1 October | 12.50 Power up
All system wide checks OK
|
13x |
894
|
Sat Sep 30 16:37:06 2023 |
TD | Honeywell HSS-DPS fault |
The Honeywell HSS-DPS dew point sensor indicator
( red LED ) is flashing c. 0.5Hz indicating |
|
893
|
Sat Sep 30 12:14:52 2023 |
TD | Satuurday 30 September | 12.54 Power up
All system wide checks OK
|
10x |
892
|
Thu Sep 28 16:03:40 2023 |
TD | Thursday 28 September |
17.00 USB-controlled ac mains relay - no
water interlock ( yellow ) LED
|
10x |
891
|
Thu Aug 31 15:01:11 2023 |
TD | Test of CAEN N1419B - T9, STFC DL |
Noise test of CAEN N1419B in T9, STFC DL.
|
7x |
890
|
Wed Aug 30 15:30:50 2023 |
TD | Test of AIDA ASIC mezzanines with FEE64s - summary | Test of ( previously bench-tested OK ) AIDA
ASIC mezzanines using FEE64 nnlycca5 ( MAC
d8:80:39:41:d7:c3 )
|
13x |
889
|
Mon Aug 21 13:17:54 2023 |
TD | Silena 7710 HV test - JCMB 21.8.23 | Silena 7710 - see attachment 1
Bias -60V
|
11x |
888
|
Sun Aug 20 16:21:45 2023 |
TD | Silena 7710 HV test - JCMB 20.8.23 | Silena 7710 - see attachment 1
Bias -60V
|
6x |
887
|
Sat Aug 19 14:52:42 2023 |
TD | BNC PB-4 & BNC PB-5 pulser test - JCMB 18.8.23 | BNC PB-4 - see attachment 1
Amplitude 35,000
|
21x |
886
|
Wed Aug 9 14:40:28 2023 |
Carole, Nic, Jeroen | AIDA HV SUPPLY & PULSER TEST | Tests with the HV supply (CAEN N1419ET)
and Pulse Generator ( BNC PB-5 ) in the detector
lab on the crate behind the DEGAS detectors, |
    |
885
|
Fri Aug 4 10:04:58 2023 |
TD | Friday 4 August contd. |
10.45 Power cycle and reboot
|
17x |
884
|
Fri Aug 4 09:07:08 2023 |
TD | Friday 4 August |
07.00 DAQ stopped
Overnight run for background alphas
|
23x |
883
|
Thu Aug 3 14:16:12 2023 |
TD | Thursday 3 August contd. |
15.16 DSSSD bias +100V leakage current +8.415uA
|
21x |
882
|
Thu Aug 3 09:21:26 2023 |
TD | Thursday 3 August |
10.20 DSSSD bias +100V leakage current +6.565uA
- attachment 1
|
47x |
881
|
Wed Aug 2 15:39:52 2023 |
TD | Wednesday 2 August contd. | 16.22 Add LK1 to aida01
DSSSD bias -100V leakage current -7.950uA
|
11x |
880
|
Wed Aug 2 08:44:00 2023 |
TD | Wednesday 2 August |
09.40 Al snout electrically connected ( <
1 Ohm ) to Al gasket and Al base plate
|
48x |
879
|
Tue Aug 1 08:50:36 2023 |
TD | Tuesday 1 August |
09.50 DSSSD bias +100V leakage current +9.255uA
- attachment 2
|
30x |
878
|
Mon Jul 31 09:43:37 2023 |
TD | Monday 31 July |
10.43 DSSSD bias +100V leakage current +7.550uA
|
44x |
877
|
Mon Jul 24 08:54:48 2023 |
TD | Monday 24 July |
09.54 DSSSD#1 bias +100V leakage current
+9.065uA
|
17x |
876
|
Mon Jul 24 08:39:39 2023 |
TD | aida10 sys console output & aida10 options | Options and system cosnole disagree about
which version of the DataAcq program is in
use? |
 |
875
|
Sun Jul 23 08:50:48 2023 |
TD | Sunday 23 July | 09.50 Cooknell HV2
2x + polarity, grounded HV channels
|
19x |
874
|
Sat Jul 22 08:17:48 2023 |
TD | Saturday 22 July | 09.20 CAEN N1419ET
Floating outputs
Channel #3 + polarity, Channels #0-2 |
26x |
873
|
Sun Jul 16 14:20:31 2023 |
TD | Sunday 16 July contd. | 15.20 All ERNI pins of aida01 adaptor PCB
OK => FEE64 #1 ASIC #2 channel #5 issue faulty
test C? faulty ASIC channel?
|
27x |
872
|
Sun Jul 16 09:36:40 2023 |
TD | 15-16 July 2023 |
Saturday 15 July
|
40x |
871
|
Fri Jul 7 11:59:06 2023 |
TD | Test of AIDA FEE64 - summary | Test of AIDA FEE64s
ISOL test station STFC DL, T9
|
11x |
870
|
Fri Jul 7 10:52:34 2023 |
TD, PJCS | Test of AIDA FEE64 d8:80:39:42:0d:0b ( aida03 ) - ASIC mezzanine replaced |
Test of AIDA FEE64 d8:80:39:42:0d:0b ( aida03
) - ASIC mezzanine replaced
|
16x |
869
|
Fri Jul 7 10:15:09 2023 |
TD | Test of AIDA FEE64 d8:80:39:41:f6:ee ( aida01 ) - HDMI connector replaced |
Test of AIDA FEE64 d8:80:39:41:f6:ee ( aida01
) - HDMI connector replaced. Cooling plate |
17x |
868
|
Thu Jul 6 10:20:25 2023 |
TD | Unable to start Rly16 server |
Unable to start Rly16 server - see attachment
1
|
|
867
|
Wed Apr 12 12:32:13 2023 |
PJCS | ASIC power short problem | I have taken videos with an Infrared camera
of the power being supplied to one isolated
ASIC on a mezzanine. |
 |
865
|
Wed Mar 1 16:42:06 2023 |
Further results from Mezzanine bench tests | PJCS | Carried out some further work on failed
mezzanine modules.
Inspected them externally and removed |
 |
864
|
Thu Feb 23 16:15:31 2023 |
TD PJCS | Bench test of AIDA FEE64 mezzanines |
Attachments 2 & 7 AIDA FEE64 mezzanine with
1) adaptor PCB connected |
7x |
863
|
Mon Apr 19 15:10:55 2021 |
OH TD | Less HEC events than expected in DSSD3 | we are noticing we appear to see less implant
events in detector 3 than we expect. This
was first noticed in the xy spectra of the |
|
862
|
Tue Feb 9 11:44:21 2021 |
OH, TD, CA, LS | 9th Feb GSI Dry run | Database file - 2019Dec19-16.19.51
Current threshold at 0x64
|
16x |
861
|
Thu Nov 14 07:57:46 2019 |
TD | AIDA moved from in-beam position at F11 |
To make room for the installation of an MR-TOF
device at F11, AIDA and DTAS have been removed |
|