Honeywell HSS DPS sensor information https://elog.ph.ed.ac.uk/AIDA/932

Cynergy3 FSVPLC - attachment 1


Honeywell sensor - red LED continuously lit - OK

Connecting FSVPLC to the interlock box causes green power LED of 24V adaptor to blink ~Hz frequency indicating a fault condition

> 
> At AIDA test station T9, STFC DL unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) - see attachments
> 
> aida04 appears to have booted OK and I can connect using telnet
> 
> MIDAS 8015 server exits - signal 1

I’ve had this problem too. The solution is to have the single FEE twice in the list in the config file. The software is then quite happy.

Alternatively a single FEE can still be accessed directly and will operate successfully.  The only thing missing is the spectra function menu. They won’t work, so FWHM is harder to determine. 

At AIDA test station T9, STFC DL unable to start MIDAS DAQ with 1x FEE64 ( aida04 ) - see attachments

aida04 appears to have booted OK and I can connect using telnet

MIDAS 8015 server exits - signal 1

Test of 4x FEE64s at AIDA test station, T9, STFC DL

startup.tcl changed from 'aida01 aida03' to 'aida01 aida02 aida03 aida04'
MIDAS 8015 server restarted

Power ON

All system wide checks OK

Pulser BNC PB-5

Amplitude 1.0V
Attenuation x1
Polarity +
Frequency 100Hz
Tail pulse, decay time 1ms
Delay 250ns (min)

ASIC settings - attachments 1-4 
Slow comparator 0x80
N.B. new ASIC settings software in use

Adaptor PCB *without* jumpers

FEE64 temperatures OK - attachment 5

WR timestamp OK - attachment 6


aida01
Rate, 1*L and 1*W spectra OK - attachments 7-9

FEE64 temperatures OK - attachment 10

aida02
Rate, 1*L and 1*W spectra OK - attachments 11-13

aida03
Rate, 1*L and 1*W spectra OK - attachments 14-17

No ADC spectra asic #4 *but* Rate, HitRate, 4*W spectra all indicate asic #4 working OK - contact issue?

aida04
Rate, 1*L and 1*W spectra OK - attachments 18-23

Bad ADC spectra asic #2 *but* Rate, HitRate, 2*W spectra all indicate asic #2 working OK - contact issue?



Date/time          ASIC mezzanine                 Pulser peak width *.*.L      MAC                   Status
                   FEE64 PCB serial #             (channels FWHM)

28.3.24 11.28      aida01 ?                       7.1,7.0,6.8,7.0              41:f6:ee              OK
28.3.24 11.44      aida02 GOC-7226-1-39/-0040     14.0,13.7,13.3,14.0          41:cf:ad              OK
28.3.24 12.14      aida03 ?                       13.2,13.2,12.0,?             42:0d:0b              OK
28.3.24 11.44      aida04 GOC-7226-1-19/-0037     15.1,?,12.8,12.8             42:0c:89              OK


Following disassembly and re-assembly

aida03 *.*.L 15.0,15.9,15.0,15.4 ch FWHM ( ADC data all channels, similar peak widths all channels )
*.*.W spectra OK
Rate, HitRate spectra OK

aida04 no change - 2.*.L spectra still bad

Micro SD cards used by the raspberry pis are cheap but prone to failing

If the system won't boot and the SD card is read only it may have failed. Best way is to buy a new micro SD card (16 or 32GB) and restore a backup

I have uploaded an image of nnrpi2 (AIDA@GSI) to aida-3 (/home/npg/nnrpi2.img)

To backup an SD card

dd if=/dev/mmcblk0 of=nnrpi2.img status=progress

To restore a backup to a new SD card

dd if=nnrpi2.img of=/dev/mmcblk0 status=progress

(/dev/mmcblk0 name may differ on different machines, is for a laptop with built in SD card reader)

https://elog.ph.ed.ac.uk/CARME/482

Snout removed from S4

All detectors removed

BB7 taken to lab
bPlastic taken to testing hall
AIDA BB18 left in box under AIDA-3 with other DSSSDs

Snout on green table in rear of Messhütte

00.55 Observe high frequency noise in aida02 & aida04 ( n+n FEE64s ) - attachments 1-5
      and aida05 ( p+n FEE64 )
      frequency c. 5MHz

      Oscillation unchanged by

      HV cycle
      ASIC control load
      FEE64 power cycle
      BNC PB-5 pulser OFF
      BNC PB-5 pulser output disconnected from test + cable ( and remains disconnected )


      BB7 HV and preamp power OFF - oscillation disappears
      Note - BB7 HV and power have been on all day and AIDA was running OK until at least 22.18 11.12.23 - go figure!


01.42 file DEC23/R7

02.00 checks

DSSSD bias -150V leakage current -5.980uA - attachment 5

FEE64 teperatures OK - attachment 6

ADC data item stats OK - attachment 7

Merger & TapeServer screens - attcahments 8 & 9

per FGEE64 Rate spectra - attachment 10 
1.8.W spectra - 20us FSR - attachments 11 & 12


02.18 ASIC check load x2

02.20 file DEC23/R8
      Final FRS setting - fragments SE 238U, PID uncertain online

02.22 zero all spectra & stats

03.23 degrader changed to 4350mg
      file DEC23/R9

03.25 zero all spectra & stats

06.00 beam stopped
     file R9 closed

06.18 pulser walkthrough test -

      BNC PB-5
      amplitude 9.0-1.0 @ 1.0V step
      attenuation x10
      polarity -
      tail pulse
      1ms decay time

      file DEC23/R11





      

MACB config 
1x level 0
4x level 1

Problem appears to related to level 1 MACB #3 ( 3 of 4 ). Transferring FEE64 inputs to MACB #4 appears to fix the problem.

Assume this means either MACB #3 or the cable to it from level 0 is the problem?

Water flow and temperature ( gauges outside S4 entrance ) OK

BNC PB-5 pulser connected to p+n FEE64s by diasy chain of test + inputs

ASIC settings 2023Nov16-18.55.20
 p+n FEE64s slow comparator 0xa, n+n FEE64s 0xf

All system wide checkks OK

DSSSD bias -150V leakage current -5.37uA - OK - attachment 1

FEE64 temperatures OK - attachment 2

ADC data item stats - attachment 3
 rates dominated by relatively few 'hot' channels
 aida06 - no cables connected to FEE64 adaptor PCB

per FEE64 Rate spectra - attachment 4
 aida06 - no cables connected to FEE64 adaptor PCB 
 system relatively quiet but has been quieter - no grounding of bPlast cabling and PSUs?

p+n and n+n FEE64 1.8.W spectra - 20us FSR - attachments 5-8
 aida06 - no cables connected to FEE64 adaptor PCB
 aida08 - no ADC calibration 



14.43 Pulser walkthrough - p+n junction FEE64s

BNC PB-5 settings
amplitude 9.0-1.0V @ 1.0V step
x10 attenuation
tail pulse
polarity +
frequency 22Hz

file DEC23/R5

15.47 R45 ends OK - see attachments 9-10
aida01 1.8.L pulser peak width 53 ch FWHM
aida06 1.8.L pulser peak width 14 ch FWHM ( no input )

15.47 file DEC23/R6 

BNC PB-5 pulser
amplitude 9.0V
frequency 2Hz

c. 19.00
Low intensity 238U fully stripped/H+/He+ - attachments 11-14
Fully stripped close to centre of DSSSD
HEC energies observed from threshold to c. 1-2GeV

19.25 Beam off
      SC41 scaler input to level 1 MACB #3 ( of 4 ) moved to level 1 MACB #4 ( of 4 )


21.00 checks


DSSSD bias -150V leakage current -6.050uA - OK - attachment 15

FEE64 temperatures OK - attachment 16

ADC data item stats - attachment 17
 rates dominated by relatively few 'hot' channels
 aida06 - no cables connected to FEE64 adaptor PCB

BNC PB-5 config - attachment 18

Merger and TapeServer browser tabs and terminal servers - attachments 19-20
 c. 160k data items/s merged
 c. 600kb to disk and forwarded to MBS

21.05.37 *all* stats zero'd

22.18 ADC data, DISC data, PAUSE, RESUME, WR data item stats - attachments 21-28
zero rate PAUSE/RESUME - one observed in c. 75 minutes

14.05 S4 closed

Water flow and temperature ( gauges outside S4 entrance ) OK

BNC PB-5 pulser connected to p+n FEE64s by diasy chain of test + inputs

ASIC settings 2023Nov16-18.55.20
 p+n FEE64s slow comparator 0xa, n+n FEE64s 0xf

All system wide checkks OK *except* adia08 ADC calibration failed

DSSSD bias -150V leakage current -5.28uA - OK - attachment 1

FEE64 temperatures OK - attachment 2

ADC data item stats - attachment 3
 rates dominated by relatively few 'hot' channels
 aida06 - no cables connected to FEE64 adaptor PCB

per FEE64 Rate spectra - attachment 4
 aida06 - no cables connected to FEE64 adaptor PCB 
 system relatively quiet but has been quieter - no grounding of bPlast cabling and PSUs?

p+n and n+n FEE64 1.8.W spectra - 20us FSR - attachments 5-8
 aida06 - no cables connected to FEE64 adaptor PCB
 aida08 - no ADC calibration 

18.25 

SSSD bias -150V leakage current -5.100uA - OK - attachment 9

FEE64 temperatures OK - attachment 10

ADC data item stats - no significant change - attachment 11
 rates dominated by relatively few 'hot' channels
 aida06 - no cables connected to FEE64 adaptor PCB

per FEE64 Rate spectra - no significant change - attachment 12
 aida06 - no cables connected to FEE64 adaptor PCB 
 system relatively quiet but has been quieter - no grounding of bPlast cabling and PSUs?

p+n and n+n FEE64 1.8.W spectra - 20us FSR - attachments 13-14
 aida06 - no cables connected to FEE64 adaptor PCB
 aida08 - no ADC calibration 

FEE64 configuration for 1x MSL type BB18(DS)-1000 24cm x 8cm DSSSD

*Beam into page*

         
                  aida09                           BB7 FEE64

         aida05   aida01   aida06                  p+n junction FEE64s

aida02                              aida04         n+n Ohmic FEE64s
           *
         aida07   aida03   aida08                  p+n junction FEE64s

* approximate position of c. 1.5cm diamond-shaped hole in black cloth optical screen positioned between 'upstream' bPlast and BB18 DSSSD.

Change n+n FEE64 aida04 d8:80:39:41:f6:b7
 asic #1 faulty

aida04 MAC from d8:80:39:41:f6:b7 to d8:80:39:41:ba:2b

restart dhcpd ( systemctl restart dhcpd )


DSSSD bias -150V -5.17uA - attachment 1

FEE64 temperatures OK - attachment 2

All system wide checks OK

ADC data item stats - attachment 3
 High rates observed in all FEE64s *except* aida01 & aida04 => aida04 asics #1-4 OK
 CC/VP have commenced cabling bPlast - will await completion of install to review noise
 

n+n 1.8.W spectra - 20 us FSR - attachments 5
 
per FEE64 rate spectra - attachment 4



18:20 AIDA noise status test

      bPlast - cabling complete, power on - all sides 
      BB7 Mesystec preamps connected, power off, no detector HV

DSSSD bias -150V -5.355uA - attachment 6

FEE64 temperatures OK - attachment 7

All system wide checks OK

ADC data item stats - attachment 8
 Rates c. 10-20k mostly dominated by a few 'hot' channels

per FEE64 rate spectra - attachments 9 & 10

p+n 1.8.W spectra - 20us FSR - attachment 11
 bPlast using 152Eu source for test - signal observed aida01 3.8.W may be recoil electron from Compton event
n+n 1.8.W spectra - 20 us FSR - attachment 12

Some photos of bPlast & BB& preamp/cabling attached

re-bPlast note that
cables screened 3M 1245 + Kpaton + drain wire -> drain wires *not* connected to ground
PSU ch 4 not ground referenced
 

Stack re-assembled - upstream to downstream

- 'upstream' bPlast
- no spacer
- black cloth optical screen on steel frame ( c. 1.5cm diamond hole lower left side in direction of beam )
- std 9mm spacer
- MSL type BB18(DS)-1000 24cm x 8cm 3208-3/3208-21/3208-22
- std 9mm spacer
- MSL type BB7(DS)-1000 3542-13 ( approx central wrt BB18 )

bPlast cables screened 3M 1245 + Kapton film + drain wire
 bPlast cables currently floating
 bPlast driver PCBs disconnected

FEE64 aida06 adaptor PCB currently disconnected

ASIC settings 2023Nov16-18.55.20

BNC PB-5 pulser - not connected

DSSSD bias -150V -5.13uA - attachment 1

FEE64 temperatures Ok - attachment 2

All system wide checks OK

ADC data item stats OK - attachment 3
 Note *very* low rate in aida02 ( n+n Ohmic side )

p+n 1.8.W spectra - 20 us FSR - attachments 4 & 5
 
per FEE64 rate spectra - attachment 6

n+n 1.8.W spectra - 20us FSR - attachments 6 & 7


AIDA To Do

replace aida04
pulser walkthrough

Honeywell HSS-DPS sensor is faulty - attachments 1 & 2

Replace with Sontay Condensation Prevention Switch - attachments 3 & 4

Wiring

      Honeywell             Sontay
      V+(*) red             V+(*) red
      GND   blue            0V    blue
      COM   green           COM   black
      DRY   yellow          N/O   yellow

Honeywell V+ 24V ac/dc +/- 20%
Sontay V+ 24V dc +/-5%, 24V ac +/-10%

V+ measured as +16.5V dc with DMM

Interlock still not working

- V value too low ?
- Honeywell DRY not equivalent to Normally Open ?

This is a short list of things todo or check before the test beam time on 11.12.23 
Updated after 15:00 CET meeting

1. Replace water interlock
- Also allows testing of AIDA for 24h+ 

2. Decide on snout configuration: 1 or 2 BB18s (plus BB7 plus bPlastic)
  It is U so if we put 2 we could damage 2 instead of just 1 (of course we try to be careful)
  To decide which bPlas is installed (only 1 will be bothered): Upstream is preferred by HA
  Install Peter's light blocking frame between bPlastic and AIDA

3. Replace aida04 with a working FEE64
  Important as aida04 is in deadtime and not very useful

4. Investigate/replace aida06 
  Less urgent because 2 strips and runs with 0 dead time

5. If 2 BB18s, add another 8 working FEE64s to the system
  Note: Cannot do 2BB18s and 1BB7 (cannot power/cool 17 FEEs)

6. Test AIDA firmware fix for individual ASIC controls (especially if BB7<->AIDA will be tested)
  BB7<->AIDA will not be tested probably, as PCB will not arrive.
  Still good to check if possible

7. Decide on FEE to take pulser (assuming no distribution/inverter available)
  Test implant response with pulser and SC41 trigger?

Pulser LEMOs removed from p+n fees
Pulser connected to n+n fees: aida02 and aida04 
BNC PB-5 Polarity --> NEGATIVE

HV and FEE power up

Rates look similar to usual (Attachments 1 and 2)

Turn on pulser, see them in n+n spectra as expected  (attachment 3) 

Pulser run R6

See peaks in ADC spectra (attachment 4)

Remove pulser from aida02, left on aida04 with 50Ohm terminator 

AIDA powered off, HV off

> On ASIC settings page trynig to change the settings for one ASIC (e.g. ASIC1 of aida09) seems to cause all 4 ASIC settings to change
> 
> 1. Ensure act on all FEEs and act on all ASICs unticked
> 2. Change aida09 asic1 low_ref to 0x1 
> 3: Change to aida09 asic4
> 4: aida09 asic4 low_ref also changed to 0x1 

Variable dumps for ASIC and ASIC4

Connect pulser to all p+n FEEs

Turn on pulser, 100 Hz (attachment 3 for settings), rates OK (attachment 1)

1 minute at 10V.. 9V.. 1V (5X atten) 

Most FEEs OK (attachment 2), aida07 and aida08 weird?

FILE: PULSER21NOV23/R4

Check in S4, one pulser LEMO not in fully, reseat and try again

File R5... much better! (attachment 4)

On ASIC settings page trynig to change the settings for one ASIC (e.g. ASIC1 of aida09) seems to cause all 4 ASIC settings to change

1. Ensure act on all FEEs and act on all ASICs unticked
2. Change aida09 asic1 low_ref to 0x1 
3: Change to aida09 asic4
4: aida09 asic4 low_ref also changed to 0x1 

Connect the BB7 on top of the snout to the former aida05 (FEE above aida01)
Also remove copper busbar that is unused

Power on AIDA... rates terrible (attachment 1)

Reground AIDA stand to platform base ... small improvement but nothng major

Decide to power OFF, recheck all connections, aida02 ERNI maybe a bit loose, otherwise all good.
Remove BB7 to try to restore status quo ante

Power on again and rates much improved (attachments 2 & 3)
Looks similar to attachment 44 on Aida test 17/11/23
-> Back to status quo?


15:05 : BB7 put back on the snout and connected (ground + HV)
No significant change has been noticed (attachments 4 & 5)

Attach cables 14 to FEE that BB7 is connected - then will configure DHCP for aida09

Start up aida, configure as before. AIDA09 appears but is not configured (ASIC settings just copied from aida08 for now)

Rates on aida look OK still (attachment 6)

HV (attachment 7)

Temps (attachment 8)

03.20 c. 3k per spill 13N beam to S4
      Observe scatter of events at all energies for LEC

      Switch LE -> MEC
      aida02 & aida04 slow comparator 0xf -> 0x3 ( c.1.5MeV )
      All other ( p+n ) FEE64s slow comparator 0xa ( c. 5MeV )
      For c. 700MeV/u 14N + 6cm s.steel -> c. 350MeV/u 14N -> c. 30MeV energy loss in 1mm Silicon, c. 45MeV energy loss in 3mm plastic

      per n+n FEE64 1.8L spectra - attachment 1
      observe 3x peaks above threshold - different Z fragments?
      per FEE64 Stat spectra


04.10 DSSSD bias -150V leakage current -5.380uA - attachment 3
      FEE64 temps OK - attachment 4
      ADC data item stats - attachment 5
      per FEE64 Stat spectra - attachment 6
      per FEE64 1.8.L spectra - attachments 7-8
      per FEE64 1.8.W spectra - 20us FSR - attachments 9-10



05.03 aida02 & aida04 slow comparators 0x3 -> 0xa
      All spectra zero'd


c. 06.30 Beam tests end
         DAQ stopped. DSSSD HV OFF. AIDA power OFF.
      

AIDA ASIC settuings 2023Nov16-18.55.20
     low comparator p+n FEE64s 0xa, n+n 0xf

     BNC PB-5 settings
     amplitide 10.0V
     attenuation x10
     decay time 1ms
     polarity + ( connected to FEE64 aida01 only )
     frequency 22Hz
     tail pulse
     remote control

16.46 per p+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 1-4
      per n+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 5-8

      DSSSD bias -150V leakage -5.690uA - attachment 9
      RH 32.7% ambient 2+3.2 deg C d.p. +5.9 deg C
      FEE64 temps OK - attachment 10


     bPlast configuration
     1x long and 1x short side connected to 3x bPlast booster PCBs
     Rohde & Schawrtz HMP4040 PSU ch 4 +4V ( ref'd to PSU chassis ground ) 
     Mesytec SiPM bias
     Screens of flat cables from bPlast to booster cards electrically connected together and to bPlast NIM bin c( below AIDA stand ) chassis
     bPlast NIM bin and TAMEX electrically isolated from AIDA stand/DESPEC platform

     Photos - attachments 11-16

17.00 Connect SC21 L disc o/p fan-out -> ESN LA8000 TTl output -> BNC PB-5 pulser ext trig
      Should enable triggering ( and delay ) of pulser from heavy-ions in scintillator SC21


17.17 LEC/MEC selection 0x -> 0x1
      ADC data item stats - attachment 20
      per FEE64 1.8.W spectra - 20us FSR - attachments 18-19
      per FEE64 Rate spectra - attachment 17
      BNC PB-5 pulser to aida01 - some channels missing asic # 2, 3 & 4
      aida04 asic# 1 rates still high but aida06 ( was aida10 ) high rates  in only two channels of asic #4
      Otherwise system very quiet as expected for MEC ( 1GeV FSR ).

17.56 LEC/MEC selection 0x1 -> 0x0

22.10 NH starts data transfer to Merger and TapeServer ( no storage mode ). Date Relay to MBS also started - see attachments  21-25

22.18 aida04 asic #1 slow comparator 0xf -> 0xff
      aida06 asic #4 slow comparator 0xa -> 0xff
      Merger data transfer c. 500k data items/s



     

We restarted AIDA (a10277ttachment 6) this morning and checked rates (attachments 3/4) and waveforms (attachments 1/2). Temperatures are shown in attachment 5.
It seems consistent with what was observed yesterday.

AIDA stopped and platform moved.

The power cable from USB main power relay was connected to the wall and not the DESPEC 19" racks as expected. It has been corrected : it is now connected to the DESPEC 19" rack, has it should be.
AIDA was restarted after that. bPlast was disconnected from 2 booster cards.
We checked the rates (attachments 7,10 and 11 [linear scale]). They are quite similar, although aida01 rate has increased (maybe a cable issue), and rate from aida07 significantly decreased (it was really low yesterday as well).
The waveforms (attachments 8 & 9) are similar as the ones obtained earlier.

bPlast has been reconnected to all booster cards. Rate increased a little (attachment 12) but broadly similar to that observed first thing this morning.
Then 2 booster cards were grounded, and the rates went up (attachments 13-16)

Afterwards, one power cable was connected to the booster card on the short side, increasing the noise, as observed yesterday (attachments 17-20)
 
The Rohde Schwarz PSU output was referenced to PSU ground ( 3mm cable to ground socket front panel ). It did not reduced much the noise (attachment 21)
Finally, the power supply was switched on, increasing the noise in AIDA (attachment 22).


After the meeting, we have chosen to reconnect bPlast to the booster : now all LIMOs are connected to the booster cards, the cards are powered and the SiPM are biased. The alarm for the short side has triggered (not full bias)
The Rohde & Scwarz PSU outputs is till referenced to its chassis ground.
See attachments 23-26 for the rates and waveforms in AIDA


14.57 JG/JB added additional black cloth to reduce nPlast SiPM dark current : now it is around 16uA. Updated noise observations

per FEE64 1.8.W spectra 20us FSR - attachments 27-28
per FEE64 1Rate spectra - attachment 29
ADC data item stats - attachment 30

aida02 asics #2-4 remain noisy c. kHz/channel 
Most other p+n FEE64s are OK - the usual 'hot' channels but most other channel rates low 

15.07 JG removed ground reference for Rohde & Schwarz PSU +4V output to bPlast booster cards
      ADC data items atst - attachment 31
      Most FEE64s have significantly higher rates so the ground reference is doing 'something'

15.12 JG re-ground ref'd Rohde & Schwarz PSU +4V output to bPlast booster cards
      ADC data item stats - attachment 32 
      Rates for most FEE64s are reduced - some significantly - PSU ground ref is doing something reproducible 

15.25 Christoph Scheidenberger reports FRS magnets ON

16.01 JG/JB TAMEX & NIM bin electrically isolated from AIDA stand/DESPEC platform. Screens of flat cables from  bPlast to booster cards grounded to snout.
      ADC data item stats - attachment 33
      per FEE64 1.8.W spectra 20us FSR - attachments 36-37
      per FEE64 Rate spectra - attachments 34-35


16.20 TAMEX & NIM bin electrically isolated from AIDA stand/DESPEC platform. Screens of flat cables from  bPlast to booster cards now connected together but electrically floating

     ADC data item stats - attachment 40
      per FEE64 1.8.W spectra 20us FSR - attachments 38-39
      per FEE64 Rate spectra - attachment 41
      Noted improvement in most FEE64 rates - aida04 improved significantly


16.31 TAMEX & NIM bin electrically isolated from AIDA stand/DESPEC platform. Screens of flat cables from  bPlast to booster cards now connected together and grounded to NIM bin chassis.
      ADC data item stats - attachment 42
      per FEE64 Rate spectra - attachment 43-44
      per FEE64 1.8.W spectra 20us FSR - attachments 44-46
      Continued, imcremental improvement in FEE64 rates 

Screenshot uploads as I hit the 50 image upload limit.

Viewing AIDA status on Thursday morning 16/11/2023. 

Rates and histograms are observed with bPlast HV connected but not powered. The LIMO cables to the booster cards of bPlast are connected and the TAMEX crate is powered.

The following details the various tests of bPlast configurations and AIDA response:

1. The rates and status are the same as yesterday evening (15/11/2023) where we had the same configuration (bPlast connected to HV but not powered). (Attachment 1-3)

2. The rates and status are the same as in 1. when trying a different power supply but it is not turned on (Attachment 4-5). The R&S HMP4040 HV supply is a linearly regulated supply while the new supply is suspected to be switching regulated (?).

3. The rates and status are the same as in 1.,2. if the HV supply is connected. In fact they seem to increase when disconnecting the HV supply. (Attachment 6).

4. The rates and status are brought back to acceptable levels when disconnecting all the LIMOs of the bPlast booster board to TAMEX. (Attachment 7-8).

5. The rates and status are fairly worse when connecting a single LIMO (attachment 9) and when connecting the Mesytec module that powers the booster board (attachment 10).

6. The rates and status increase a little favourably when connecting a single LIMO to an odd numbered channel. (Attachment 11).

7. The rates and status are dramatically worse when connecting two LIMOs and a Mesytec module to the bPlast booster card. (Attachment 12).


The next tests will be dismounting the snout and trying to shield the bPlast ribbon cables with copper tape.

Tests resumed after lunch 14:00:00:

- The bPlast ribbon cables running to the booster boards were insulated with copper tape and kapton tape, and for the moment grounded freely with a tinned copper braid. A multimeter check of the ribbon cable showed that it is isolated from the snout as desired.

- Remounting the snout we found the following result on the AIDA rates and hit patterns (Attachment 15 & 16). The rates and hit patterns appear to be the same as it was before bPlast was mounted in the snout. The connector cable of AIDA01 was found to be broken for ASICs 1&2 (3&4 are still connected), and the noise on AIDA04 has increased slightly relative to previous tests.


8. The wave forms of the AIDA modules show regular structure. There are some high frequency 'beats' present in some of the AIDA modules (Attachment 13-14). The waveform of AIDA01 has the pulser signal (25 Hz), but has no noise as ASIC 1&2 is missing.

9. The next test carried out was that all the ribbon cables ground were connected to the separate grounds on the item frame and on the frame carrying the booster cards. The bPlast ribbon cables were also plugged into the booster board. (attachment 17-20).

10. The next test we connect all the ribbon cables to the same ground on the item frame and the ribbon cables were disconnected from the booster cards. (attachment 21 -24).

11. The test thereafter we connect all the grounds together but not grounded to anything, just floating in air. The ribbons were still disconnected from the booster cards. Rates were observed to decreased back to normal levels from the previous grounding configuration. (Attachment 25-28)

12. The final test carried out from the grounding tests was connecting the bPlast ribbon cables with floating air ground to the booster cards mounted around the snout. The rates and wave forms observed are back to normal and transience in some of the wave forms from (Attachment 20-28) have gone away after adjusting the LED and wave form capture threshold from 8900 -> 8000/8200. The rates and wave forms are back to the same point when we started the tests after lunch (Attachment 29-32).  

The next series of tests involved connecting and/or powering the bPlast HV and LIMOs individually to see their input to AIDA. Each of the tests were carried out individually, resetting back to the configuration from (Attachment 29-32, test 12.): 

13. The first test carried out was connecting a LIMO from the TAMEX card to the long side booster card of the bPlast. (Attachment 33-36). The rates, wave form and hit patterns seem to be dramatically affected by simply connecting 1 LIMO to the long side booster card.

14. The second test was connecting the HV supply of the booster card on the short side (right relative to the beam axis) and powering it with the R&S HMP4040 supply. Results are given by (Attachments 37-40). Rates, hit pattern and wave forms change and increase drastically.

15. The third test was simply connecting the booster card HV supply (R&S HMP4040) but not powering it at all. Results are given by (attachment 41-44). Simply connecting the HV supply is introducing a considerable amount of noise into AIDA. (Maybe grounding the supply, or changing its position relative to the DESPEC setup is a next possible test).

16. The fourth test was biasing the SiPMs on the short side booster card ie. right side of the bPlast with the Mesytec module 29.00 V @ 4 uA. The results are given by (attachment 45-48). The rates, hit patterns and wave forms return to more reasonable levels, however, it is clear that biasing the SiPMs is still introducing a great deal of noise into some of the ASICs based on the proximity. eg. aida03 ASIC1. 

17. The fifth and final test of the day was under-biasing the SiPMs of the long side of the bPlast with the Mesytec module 26.80 V @ 19 uA. The results are given by (attachment 1-4 in AIDA tests 16/11/2023 cont.). The rates, hit patterns and wave forms are the same as that which was carried out in test 16.


The tests wrap up with suspicion to the HV supply of the booster cards, whether it is grounded or not and its position in the setup. The grounding of the booster cards is also seen to affect AIDA substantially. Isolating and grounding the ribbon cables has proved to be helpful when biasing the SiPMs as the noise in AIDA is reduced in comparison to previous tests. The wave forms when connecting the HV supply seems to show a 100 kHz signal (HV supply cross-talk?).

11.36 Water flow, pressure & temperature ( 19 deg C ) OK

      Power ON


      Detector configuration - installed yesterday pm

      Extant ( May 2022 campaign ) snout
      1x MSL type BB18(DS)-1000 24cm x 8cm 'triple' DSSSD
      1x ( downstream ) bPlast

      2x additional Al foil sheets over end cap to ensure light tight ( zero dark current ) for bPlast
      Dark current c 0.4uA measured for extant 2x Al foil sheets only


      FEE64 configuration - aida01 - aida08
      aida02 & aida04 n+n Ohmic strips, other FEE64s p+n junction strips
      NH re-named FEE64s using dhcpd.conf - *no* changes to AIDA PSU cabling to FEE64s 


      All system wide checks OK

      DSSSD bias -150V leakage current -5.140uA - attachment 1
      FEE64 temps OK - attachment 2


      ASIC settings 2021Apr29-13-16-00
      Manually change ASIC settings aida06 & aida08 from - to + input

      BNC PB-5 pulser to aida08
      settings?

      Slow comparator 0x64 all FEE64s
      ADC data item stats - attachment 3

      Increased rates and noise cf yesterday's test https://elog.ph.ed.ac.uk/AIDA/916
      See attachments 4-9
      Per FEE64 Rate spectra
      Per FEE64 1.8.L spectra
      Per FEE64 1.8.W spectra - 20us FSR

12.10 Disconnected power cables(?) from 3x bPlast cards around AIDA snout 
      1x card hanging to side of snout - aida04 side, 2x resting on top of AIDA snout ( inserted 2 sheets folded A4 paper between AIDA snout and PCBs )

      Per FEE64 1.8.W spectra - 20us FSR - attachments 10 & 11
      Per FEE64 Rate spectra - attachment 12
      Significant improvement observed


      Slow comparators 0xa p+n FEE64s, 0xf n+n FEE64s
      pwer FEE64 1.8.W spectra - 20us FSR - attachments 13-15
      ADC data item stats  - attachment 16
      per FEE64 Rate spectra - attachments 17 & 18


14.16 Removed bPlast cards from around snout - small improvment ADC stats
      Attachments 19-22


15.10 aida01 FEE64 adaptor PCB re-seated ( c. 1 pin row out of position )

      ASIC data item stats - attachment 23
      Significant improvement which approaches previous noise performance


      CC now assembling bPlast adaptor cards on a standoff Minitek frame
      HA/IK have confirmed that bPlast cables are screened on one side only - CC demonstrated that surfaces of both sides of the bPlast cabling are non-conductive


      Once assembled ( cards + power cables + input cables to bPlast detector ), observed increased noise similar to that observed this am


      Attempt to return to status quo ante did not reduce noise but observed problems with aida01 ( asics #3 & #4 did not load ) - attachment 24
      An unusual error message - power cycled and rebooted FEE64s

      Slow comparator 0x64
      ADC data item stats - attachment 27

     Slow comparators 0xa p+n FEE64s, 0xf n+n FEE64s
     ADC data item stats  - attachments 26
     per FEE64 Rate spectra - attachment 25


     This appears to have ( largely ) restored status quo ante. Large number of hot channels but other typically close to previously observed rates.







      
      

Attempting to change the text string specifying the ASIC settings directory ( 2023Nov14-15.25.24 ) in Options produces an error - see attachments 1 & 2

System aida-gsi, anydesk 246 067 683

15.06 Quick test of AIDA 24cm x 8cm 'triple' DSSSD before dismounting to install 1x bPlast detector downstream of the DSSSD

      Water flow, pressure and temperature OK

      Power Up OK

      All system wide checks OK

      DSSSD bias -150V leakage current -5.29uA 

      ASIC settings 2021Apr29-13-16-00
      FEE64s re-configured to aida01 - aida08 by NH
      aida02, aida04 negative input, all other FEE64s positive input
      Currently unable to specify settings directory for Options so aida06 & auida08 are still defined as negative input FEE64s - need to change ASIC settings manually

      slow comparator p+n FEE64s 0x64->0xa, n+n FEE64s 0x64->0xf

      per FEE64 Rate spectra - attachment 1
      ADC data item stats OK - attachment 2
      p+n FEE64 rates dominated by 'hot' channels, other channels < 1Hz
      n+n FEE64 rates ~ 10Hz 
      Known issues with aida04 asic #1 and aida10 ( now aida06 asic # 4 ) remain to addressed/investigated

      No chnages in performance cf. https://elog.ph.ed.ac.uk/AIDA/906 & https://elog.ph.ed.ac.uk/AIDA/907


     

Analysis of tape folder /TapeData/BG18OCT23

Using Go4 https://github.com/cej25/DESPEC_NOV23

Figure 1: Hit pattern (XY)
Figure 2: Energy 1D Spectra, alpha peaks visible
Figure 3: Energy X vs Energy Y
Figure 4: 1D Strip (0-386 = X 0-386, 386-512 = Y 0-128) and Energy

Some gaps at 112-114, 121-128 = aida05 
Hot channels at 368, 381, 382 = aida06 (high rate seen)
Gap at 435-450 = aida04 (ASIC#4 which is faulty)

Generally 1-10 counts per strip, 1 ch wide gaps may be statistics or issues

Started AIDA at 1:41 pm, writing to disk: file BG18OCT2/R6, stopped at  17:26
pict1: HV supply
pict2: temperature
pict3: spectrum in stat, layout2
pict4: statistics

Started AIDA at 11:54am, writing to disk: file BG18OCT2/R5, stopped at 19:14

pict1: HV supply
pict2: temperature
pict3: spectrum in stat, layout2
pict4: statistics

pict5: sum spectra at 18:20 (3.4 hours)

system power off and unbiased

Started AIDA at 3:05pm, writing to disk: file BG18OCT2/R4, stopped 18.30

pict1: HV supply
pict2: temperature
pict3: spectrum in stat, layout2
pict4: statistics

pict5: sum spectra at 18:20 (3.4 hours)

system power off and unbiased

Started AIDA at 11:50, writing to disk: file BG18OCT2/R3, stopped around 3 pm

pict1: HV supply
pict2: temperature
pict3: spectrum in stat, layout2
pict4: statistics

Water Temp: 20 C - Flow felt on pipe
AIDA interlock OVERRIDE 

One USB Hub for the FEE64 TTYs was unplugged on cable tray, replugged in
 (may fix Pi_Monitor)

Bias DSSD (Ch 3) 
Leakage current stays at 17 uA during ramp up. At 150 V it quickly drops back to 6 uA
 Fig 1

Current FEE mapping
p+n aida09 aida01 aida10
    aida11 aida03 aida12

n+n aida02 aida04

Unused aida06 aida08

Due to merger need 8 FEEs 1-8 to merge properly will temporarily renumber for 1 DSSSD test
 - Will revert to this numbering for experiment!

Power up with unchanged configuration to test

Fee Temps OK Figure 2

Start DAQ at 0x64 threshold (1 MeV)
 Most channels 0 rate (expected)
 ASIC01 of AIDA4 very hot 
 2 channels in aida10 very hot
 Figure 3

Pulser OFF and only connected to aida11 aida03 aida12
 LOCAL operation at present 10V/10X level, positive tail, 25 Hz

STOP and Power off to renumber 

New mapping for now:

p+n aida05 aida01 aida06
    aida07 aida03 aida08

n+n aida02 aida04

aida09 ---> aida05
aida10 ---> aida06
aida11 ---> aida07
aida12 ---> aida08

-

Backup dhcpd.conf -> dhcpd.conf231019
Update to only first 8 fees
only turn on Relay 1

Update MIDAS Tcl
/MIDAS/config/TclHttpd/aidas-gsi@8015/startup.Tcl
list aida01... aida08

new folder
/home/npg/LayOut/GSI_triple_test_renumber

copy to /tmp

-

Reboot MIDAS and Power on Relay 1
Power OFF
Reboot dhcp!

Anydesk Connection Lost??

Make new DB key 2023Oct19-13.46.30
Copy aida01/CONTENTS (p+n) to aida06 and aida08 
Cannot update Options http://localhost:8015/AIDA/Options/Options.tml ? Error 500
Figure 4
Load settings manually and check-load ASIC
TODO: Manually change files, or?

GO

ADC items + rates figures 5, 6

Restart Merger
xfer Links (bad)
Netvar -> Inquire Registers
NetVar.MERGE.RunOptions WRITE 1

Merger now shows xfer Links => Merger
Merger GO

Open file BG18OCT23  R1

STOP DAQ
Data Xfer #1 Enable
GO DAQ

See merger links all GSI_triple_test_renumber
Enable output to data storage
xfer Links => Merger => storage

See tape rate: 3 MB/s (!)

Also start MBS on x86l-119 (new AIDA FDR) and try MBS relay
rate seen in MBS

Figure 8 - Accumulated statistics for ca 3 hours
 Figs 9, 10 - ADC spectra

System turned off and DSSSD biased down for end of work day, due to water issue

start 14.55

      ASIC settings 2021Apr29-13-16-00
      slow comparator 0xa ( all p+n junction FEE64s ) and 0xf ( all n+n Ohmic FEE64s )

      BNC PB-5
      amplitude 10.0V
      attenuation x10
      tail pulse
      decay time 1ms
      frequency 25Hz
      polarity -

      PB-5 output direct to aida02 *only*

      CAEN N1419ET non-floating outputs ( internal LK fitted )
      ch2 - polarity

      HV cable - standard coaxial cable to aida12 chained to aida03 & aida11
      chain ( Lemo-00 cables ) adaptor PCB gnd from aida09 to aida01 & aida10
      ground cable from aida04 adaptor PCB gnd to aida12, aida02 & aida09
      aida04 LK1 ( local gnd ) fitted
      aida03 LK3 fitted ( DSSSD PCB gnd )

      DSSSD bias -150V -6.510uA - attachment 1
      ADC data item stats - attachment 2
       p+n rates dominated by hot channels - most p+n channels < 1Hz/channel
       n+n rates c. 10Hz/channel 
       
      per FEE64 Rate spectra - attachment 3-5

      aida02 1.8.L pulser peak width 102 ch FWHM ( 70 keV FWHM )

      aida02 *.*.L spectra - attachments 6-9
       common x & y scales for all spectra - peak height proxy for peak width
       all channels have similar pulser peak widths 

      aida02 3.*.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 10-17


      per p+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 18-25

      per n+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 26-33


      DSSSD bias -150V -6.510uA - attachment 34
      ADC data item stats - attachment 35
       p+n rates dominated by hot channels - most p+n channels < 1Hz/channel
       n+n rates c. 10Hz/channel 
       
      per FEE64 Rate spectra - attachment 36-38

      aida12 1.8.L pulser peak width 56 ch FWHM ( 39keV FWHM )

      aida12 *.*.L spectra - attachments 39-42
       common x & y scales for all spectra - peak height proxy for peak width
       60 channels have similar pulser peak widths
       4 channels show peak widths c. 2x larger ( 'hot' channels )

      aida12 3.*.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 43-50

10.10 Water flow & temp OK
      Power ON

      All system wide checks OK


      ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64

      BNC PB-5
      amplitude 10.0V
      attenuation x10
      tail pulse
      decay time 1ms
      frequency 25Hz
      polarity -

      PB-5 output direct to aida01 *only*

      CAEN N1419ET non-floating outputs ( internal LK fitted )
      ch2 - polarity

      HV cable - standard coaxial cable to aida12 chained to aida03, aida11, aida09, aida01 & aida10
      aida04 LK1 ( local gnd ) fitted
      ground cable from aida04 adaptor PCB gnd to aida12 & aida02
      aida03 LK3 fitted ( DSSSD PCB gnd )

      DSSSD bias -150V -6.300uA - attachment 1
      FEE64 temps OK - attachment 2
      ADC data item stats - attachment 3
       
      per FEE64 Rate spectra - attachment 4
       ignore aida06 & adida08 - not connected to anything
       ignore known issue of high rates aida04 asic #1 and aida10 asic #4 - remediable

      aida01 1.8.L pulser peak width 75 ch FWHM ( 53keV FWHM )

      1.8.W spectra - 20us FSR - attachments 5 & 6


10.35 slow comparator 0x64 -> 0xa ( all p+n junction FEE64s ) and 0xf ( all n+n Ohmic FEE64s )

      ADC data item stats - attachment 7
       
      per FEE64 Rate spectra - attachment 8-10

      p+n rates dominated by hot channels - most p+n channels < 1Hz/channel
      n+n rates c. 50Hz/channel 



      per p+n FEE64 1.8.W spectra - 20us, 200us & 2ms FSR - attachments 11-13
      per n+n FEE64 1.8.W spectra - 20us, 200us & 2ms FSR - attachments 14-16



12.10 HV cable - standard coaxial cable to aida12 chained to aida03 & aida11
      chain ( Lemo-00 cables ) adaptor PCB gnd from aida09 to aida01 & aida10 

      DSSSD bias -150V -6.535uA - attachment 17
      ADC data item stats - attachment 18
       
      per FEE64 Rate spectra - attachment 19-21

      aida01 1.8.L pulser peak width 78 ch FWHM ( 55keV FWHM )

      1.8.W spectra - 20us FSR - attachments 22 & 23



12.40 HV cable - standard coaxial cable to aida12 chained to aida03 & aida11
      chain ( Lemo-00 cables ) adaptor PCB gnd from aida09 to aida01 & aida10
      ground cable from aida04 adaptor PCB gnd to aida12, aida02 & aida09

      DSSSD bias -150V -6.535uA - attachment 24
      ADC data item stats - attachment 25
       
      per FEE64 Rate spectra - attachment 26-28

      aida01 1.8.L pulser peak width 61 ch FWHM ( 42keV FWHM )

      1.8.W spectra - 20us FSR - attachments 29-32


      aida01 *.*.L spectra - attachments 33-36
       common x & y scales - pulser peak height proxy for peak width
      aida01 3.*.W spectra - 20us FSR - attachments 37-39


     per p+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms - attachments 40-47

      CAEN N1419ET ch 2 - all outputs non-floating ( internal LK fitted )
      Standard coaxial HV cable chained to aida12, aida03, aida11, aida09, aida01 & aida10
      aida04 LK1 ( local gnd ) fitted

      ground cable from aida04 adaptor PCB ground to aida12 to aida02

      aida03 LK3 ( PCB gnd ) fitted

      BNC PB-5 
      amplitude 10.0V
      attenuation x10
      decay time 1ms
      polarity +
      frequency 25Hz


      test + direct from PB-5 to aida12 *only*

      slow comparator 0xf

      DSSSD bias -150V -7.280uA

      aida12 1.8.L pulser peak width 55 ch FWHM

      aida12 *.*.L spectra - attachments 1-4
      All channels have similar pulser peak widths to 1.8.L *except* 1.1.L, 1.4.L, 4.7.L & 4.13.L ( hot channels ) and 2.2.L, 2.9.L & 2.12.L no pulser peak



      test + direct from PB-5 to aida01 *only*

      aida01 1.8.L pulser peak width 70 ch FWHM

      aida01 *.*.L spectra - attachments 5-8
      All channels have similar pulser peak widths to 1.8.L *except* 1.1.L, 1.4.L, 4.7.L & 4.13.L ( hot channels )


      per FEE64 1.8.W spectra - 20us FSR - attachments 9-12
      per FEE64 1.8.W spectra - 200us FSR - attachments 13 & 14

10.00 Water flow & temp OK
      Power ON

      All system wide checks OK

      CAEN N1419ET ch 2 - all outputs non-floating ( internal LK fitted )
      Standard coaxial HV cable chained to aida12, aida03 & aida11
      aida04 LK1 ( local gnd ) fitted

      ground cable from aida04 adaptor PCB ground to aida12 to aida02

      aida03 LK3 ( PCB gnd ) fitted

      BNC PB-5 
      amplitude 10.0V
      attenuation x10
      decay time 1ms
      polarity -
      frequency 25Hz

      test + cable and test + chain removed
      test - direct from PB-5 to aida02 *only*

      DSSSD bias -120V -6.105uA - attachment 1

      FEE64 tempweratures OK - attachment 2

      slow comparator 0x64

      ADC data item stats - attachment 3
      Note 
       aida04 asic #1 u/s
        ASIC mezzanine to be replaced
       aida10 asic #4 v. high rates observed
        see https://elog.ph.ed.ac.uk/AIDA/901 attachment 45
        ASIC/cable/wafer issue ?

      rate ~ 1600Hz observed for aida02 - pulser
      All other rates 0Hz

      per FEE64 Rate spectra - attachment 4

      aida02 1.8.L pulser peak width 137 ch FWHM


      1.8.W spetcra 20us, 200us & 2ms FSR - attachments 5-10


      slow comparator 0x64 -> 0xf 

      ADC data item stats - attachment 11
      per FEE64 Rate spectra - attachments 12 & 13
       p+n rates entirely dominated by hot channels, otherwise rates ~0Hz
       n+n rates ~ 200-300Hz/channel

      slow comparator 0xf -> 0xa

      ADC data item stats - attachment 14
      per FEE64 Rate spectra - attachments 15-17
       p+n rates aida12, aida03 & aida11 entirely dominated by hot channels, otherwise rates ~0Hz
       p+n rates aida10, aida01 & aida09 ~500-1000Hz/channel
       n+n rates ~ 2000-3000Hz/channel

11.25 Extend HV chain from aida11 to aida09

      ADC data item stats - attachment 18
       significant decrease in aida09 rate

      1.8.W spectra 2ms FSR - attachments 19 & 20
       significant improvement in aida09 1.8.W noise

      aida02 1.8.L pulser peak width 165 ch FWHM ( slow comparator 0xa ), 127 ch FWHM ( 0xf )


12.00 Extend HV chain from aida09 to aida01 & aida10

      slow comparator 0xf

      ADC data item stats - attachment 21

      per FEE64 Rate spectra - attachment 22

      1.8.W spectra 2ms FSR - attachments 23-26
       significant improvement in aida01 & aida10 1.8.W noise

      aida02 1.8.L pulser peak width 127 ch FWHM ( 0xf )


12.35 slow comparator 0xf
      
      ADC data item stats - attachment 27
      per FEE64 Rate spectra - attachment 28




      slow comparator 0xa
      
      ADC data item stats - attachment 29
      per FEE64 Rate spectra - attachment 30



      slow comparator 0x9
      
      ADC data item stats - attachment 31
      per FEE64 Rate spectra - attachment 32 & 33



      slow comparator 0x8
      
      ADC data item stats - attachment 34
      per FEE64 Rate spectra - attachment 35



      slow comparator 0x7
      
      ADC data item stats - attachment 36
      per FEE64 Rate spectra - attachment 37



      slow comparator 0x6
      
      ADC data item stats - attachment 38
      per FEE64 Rate spectra - attachment 39



      slow comparator 0x5
      
      ADC data item stats - attachment 40
      per FEE64 Rate spectra - attachment 41



16.55 Background alpha 3*L & 3*W ( 20us FSR ) spectra - attachments 42 & 43
      Slow comparator 0xf
      Waveform threshold 7000 ( - polarity ), 9000 ( + polarity )

17.00 DSSSD bias -120V -7.125uA - attachment 44

      aida02 1.8.L ( n+n Ohmic side strip ) pulser peak width as function of DSSSD bias 

      Bias I_l    FWHM  Centroid
      (V)  (uA)   (ch)  (ch)
      -120 -7.125 124.8 43090
      -140 -7.230 124.5 43092
      -160 -7.370 120.2 43093
      -180 -7.570 120.0 43095
      -100 -7.020 143.8 43089
       -80 -6.820 continuum/no peak
      -150 -7.300 122.6 43093


      DSSSD bias -150V -7.280uA

      aida02 *.*.L spectra - attachments 45-48
      All channels have similar pulser peak widths to 1.8.L
 








      

09.38 Water flow & temp OK
      Power ON

      All system wide checks OK

      DSSSD HV +120V +5.585uA - attachment 1

      CAEN N1419ET grounded output ( internal LK fitted ) plus ThorLabs inline filter
      standard coaxial cable to aida04, no HV daisy chain aida12, aida03 & aida11
      aida03 LK3 fitted
      aida11, aida03, aida12 LK1 fitted

      test + & test - daisy chains removed

      FEE64 temps OK - attachment 2
      
      slow comparator 0x64
      ADC data item stats - attachment 3

      per FEE64 Rate spectra - attachments 4

      1.8.W spectra - 200us FSR - attachments 5-8



      test + to aida01 *only*

      ADC data item stats - attachment 9
      per FEE64 Rate spectra - attachment 10
      aida01 1*L spectra - attachment 11
       pulser peak width 1.8.L 141 ch FWHM


      ThorLabs inline filter removed
      ADC data item stats - attachment 12
      per FEE64 Rate spectra - attachment 13
       pulser peak width 1.8.L 136 ch FWHM



14.15 DSSSD HV +120V +6.610uA
      Disconnect aida01 ribbon cable drain wire from adaptor PCB gnd
       aida01 1.8.L pulser peak width 188 ch FWHM - amplitude/structure of noise does not change significantly but observe higher frequency components in addition
      1.8.W p+n spectra - 20us FSR - attachment 14


15.20 Switch from HV + to HV - N1419ET ch 3 to ch 2
      HV coaxial cable chain aida12, aida03, aida11, aida04 LK1 fitted 
      aida12, aida03 & aida11 LK1 removed
      Connect aida01 ribbon cable drain wire to adaptor PCB gnd
       
      DSSSD HV-120V -6.720uA - attachment 15
   
      ADC data item stats - attachment 16

       aida01 1.8.L pulser peak width 138 ch FWHM
 
      1.8.W spectra - 20us FSR - attachments 17 & 18

      Little observable difference between HV - and +, as expected

16.20 Jumper aida04 adaptor PCB gnd to aida12 adaptor PCB gnd

      slow comparator 0x64 -> 0xf

      ADC data item stats - attachment 20

      per FEE64 Rate spectra - attachment 21 & 24

      1.8.W spectra - 20us FSR - attachments 22 & 23
    
             aida01 1.8.L pulser peak width 99 ch FWHM


17.00 Ground cable from aida04 gnd to aida12 gnd

      ADC data item stats - attachment 25

      per FEE64 Rate spectra - attachment 26 & 27

      1.8.W spectra - 20us FSR - attachments 28 & 29
    
             aida01 1.8.L pulser peak width 97 ch FWHM


17.20 Ground cable from aida04 gnd to aida12 gnd to aida02 gnd

      slow comparator 0xf ~ 150keV

      ADC data item stats - attachment 30

      per FEE64 Rate spectra - attachment 31

      1.8.W spectra - 20us FSR - attachments 32 & 33
      1.8.W spectra - 200us FSR - attachments 32 & 33
    
             aida01 1.8.L pulser peak width  85 ch FWHM ~  65keV FWHM => 5s threshold 138keV 
             aida12 1.8.L pulser peak width  58 ch FWHM ~  44keV FWHM => 5s threshold  93keV
             aida02 1.8.L pulser peak width 133 ch FWHM ~ 100keV FWHM => 5s threshold 212keV

             Rate spectra are consistent with these estimates, i.e. observe ~zero rate for p+n channels ( except hot channels ) and low ( ~100-200Hz rate per channel ) for n+n channels

     p+n noise aida12, aida03, aida11 excellent
     for aida10, aida01 & aida09 good - can probably be improved to match aida12 etc
     significant improvement observed for n+n side

     aida12 *.*.W spectra - attachments 34-37

     per p+n FEE64 1.8.W spectra - 200us FSR - expanded scale - attachment 38

15.20 aida10 LK4 ( front f/p -> gnd ) fitted - investigate impact aida10 asic #4 edge channels
      DSSSSD HV bias +100V >+50uA
       breakdown MGR & Front F/P?
       wafer?
       cabling?

      aida10 LK4 removed
      DSSSD HV +120V +6.760uA stable - attachment 1

09.55 Water pressure and temp OK
      Power on

      All system wide checks OK

      DSSSD HV +120V +5.600uA - attachment 1

      CAEN N1419ET floating output
      standard coaxial cable to aida04, HV daisy chain aida12, aida03 & aida11
      aida03 LK1 & LK3 fitted

      test + & - daisy chains removed

      FEE64 temps OK - attachment 2
      
      slow comparator 0x64
      ADC data item stats - attachment 3

      per FEE64 Rate spectra - attachments 4-6

      1.8.W spectra - 20us & 200us FSR - attachments 7-10


11.00 CAEN N1419ET floating -> gnd output ( via internal LK )
      standard coaxial cable to aida04
      aida03 LK1 & LK3 fitted

      test + daisy chain removed, test - daisy chain aida02 - aida04

      DSSSD HV +120V +5.955uA - attachment 11

      slow comparator 0x64
      ADC data item stats - attachment 12

      per FEE64 Rate spectra - attachments 13 & 14

      1.8.W spectra - 200us FSR - attachments 15 & 16

      Overall, significant improvement in extrinsic noise for both p+n and n+n sides


      slow comparator 0xf
      ADC data item stats - attachment 17

      per FEE64 Rate spectra - attachment 18




11.50 LK1 fitted to aida12, aida03 & aida11

      DSSSD HV +120V +6.030uA - attachment 19

      slow comparator 0xf
      ADC data item stats - attachment 20

      1.8.W spectra - 200us FSR - attachments 21 & 22

      Incremental improvement in extrinsic noise for both p+n and n+n sides


12.20 LK1 fitted to aida12, aida03 & aida11, HV daisy chain aida12, aida03 & aida11 removed

      DSSSD HV +120V +6.125uA - attachment 23

      slow comparator 0xf
      ADC data item stats - attachment 24

      1.8.W spectra - 200us FSR - attachments 25 & 26

      Little observable difference

12.40 test - daisy chain removed

      slow comparator 0xf
      ADC data item stats - attachment 29

      per FEE64 Rate spectra - attachments 30 & 31

      1.8.W spectra - 200us FSR - attachments 32 & 33

      Further improvement in extrinsic noise observed for both p+n and n+n sides

14.00 additional ThorLab inline filter added to HV coaxial to aida04

      DSSSD HV +120V +6.505uA - attachment 34

      slow comparator 0xf
      ADC data item stats - attachment 35

      per FEE64 Rate spectra - attachments 36

      1.8.W spectra - 200us FSR - attachments 37 & 38

      Little observable difference

14.15 DSSSD HV +140V +6.685uA - attachment 39
      1.8.W spectra - 200us FSR - attachment 40

      DSSSD HV +160V +6.765uA - attachment 41
      1.8.W spectra - 200us FSR - attachment 42

      additional detector HV to dep+30V ( 160V ) mkaes little difference to n+n noise



14.45 per FEE64 4.*.W spectra - 200us FSR
      n+n aida02 aida04 - attachments 43 & 44
      p+n aida10, aida01, aida09 - attachments 45-47
      p+n aida12, aida03, aida11 - attachments 48-50

      aida09 missing strips? cable?
      aida10 large transients for edge strips

Slow comparator 0xf

DSSSD HV +120V +6.400uA - attachment 3

per FEE64 Rate spectra - attachment 1
ADC data item stats - attachment 2

test + disconnected at start of chain aida10, aida1 ... aida12

ADC data item stats - attachment 4
per FEE64 Rate spectra - attachment 5

No difference observed

DSSSD HV +130V +6.455uA - attachment 7
DSSSD HV +160V +6.605uA - attachment 6

per FEE64 1.8.W spectra - 2ms FSR - attachments 8 & 9
per FEE64 Rate spectra - attachments 10 & 11
ADC data item stats - attachment 12

Depletion+30V bias = 160V - no change to n+n noise, increased noise more generally


17.30 power off, HV off
      test + daisy chain removed from aida10, aida01 ... aida12
      power on
      slow comparator 0x64

      DSSSD bias +120V +6.455uA - attachment 13

      ADC data item stats - attachment 14

      per FEE64 Rate spectra - attachments 15 & 16
  
      1.8.W spectra - 20us & 200us FSR - attachments 17 & 18

      extrinsic noise worse but restricyted to a few hot channels
      
      slow comparator 0xf
      per FEE64 Rate spectra - attachment 19


18.40 DSSD HV to aida04 ( standard coaxial cable ), N1419ET floating output
      HV chain aida12, auda03, aida11 
      aida03 LK1 and LK3 fitted
      slow comparator 0x64

      DSSSD bias +120V +6.435uA - attachment 20
      ADC data item stats - attachment 21

      per FEE64 Rate spectra - attachments 22-24

      1.8.W spectra - 200us FSR - attcahments 25 & 26

       extrinsic noise worse esp. n+n Ohmic side
       p+n rates dominated by hot channels

12.22 USB-controlled ac mains relay - interlock overidden
      Water flow OK. Water temp 19 deg C OK.
      Power on.

      aida03 LK3 fitted

      test + chaine to all p+n FEE64s
      test - disconnected at EG&G Ortec 534 output and aida04 n+n FEE64 adaptor card

      CAEN N1419ET floating output
      Bias chain braid - aida11, aida03 & aida12, core aida04
      Bias +60V +5.28uA stable - attachment 1

      FEE64 temps OK - attachment 2

      1.8.W spectra - 200us FSR - attachments 3 & 4
      per FEE64 p+n 1.8.L spectra - attachment 5
       aida01 pulser peak width 240 ch FWHM

      Slow comparator 0x64

      per FEE64 Rate spectra - attachment 6
       p+n rates dominated by hot channels
      ADC data item stats - attachment 7

12.58 Bias +100V +6.075uA stable - attachment 8

     1.8.W spectra - 200us FSR - attachments 9 & 10
      per FEE64 p+n 1.8.L spectra - attachment 11
       aida01 pulser peak width 116 ch FWHM

      Slow comparator 0x64

      per FEE64 Rate spectra - attachment 12
       n+n rates dominated by hot channels, no p+n hot channels
      ADC data item stats - attachment 13

     1.8.W spectra - 20us FSR - attachments 14 & 15

     1.8.W spectra - 2ms FSR - attachments 16-19

     Observe 100kHz extrinsic noise with 5kHz modulation

13.22 Bias +100V +5.995uA stable - attachment 20

13.36 Bias +100V +6.040uA stable - attachment 25

     per FEE64 Rate spectra - attachment 21
       n+n rates dominated by hot channels, no p+n hot channels
      ADC data item stats - attachment 22

     slow comparator 0x64 -> 0xf

     per FEE64 Rate spectra - attachment 23
     ADC data item stats - attachment 24

13.36 Bias +110V +6.175uA stable - attachment 30

     slow comparator 0xf -> 0x64

     1.8.W spectra - 2ms FSR - attachments 26 & 27

     per FEE64 Rate spectra - attachment 29
      aida02, aida04 & aida10 rates dominated by hot channels
     ADC data item stats - attachment 28

13.36 Bias +120V +6.295uA stable - attachment 36

     slow comparator 0x64

     1.8.W spectra - 2ms FSR - attachments 33 & 34

     per FEE64 p+n 1.8.L spectra - attachment 31
      aida01 pulser peak width 120 ch FWHM

     per FEE64 Rate spectra - attachment 32
      aida02, aida04 & aida10 rates dominated by hot channels

     ADC data item stats - attachment 35


15.07 aida03 LK1 fitted
      Bias +60V +5.600uA stable
      Bias +100V +6.260uA stabl

      slow comparator 0x64

      1.8.W spectra - 2ms FSR - attachments 37 & 38

      per FEE64 p+n 1.8.L spectra - attachment 40
       aida01 pulser peak width 115 ch FWHM

      per FEE64 Rate spectra - attachment 39
       aida02, aida04 & aida10 rates dominated by hot channels

      ADC data item stats - attachment 41

      DSSSD HV - attachment 42




    per FEE64 Rate spectra - attachment 39
       aida02, aida04 & aida10 rates dominated by hot channels

      ADC data item stats - attachment 41



      


      
      

pi@raspberrypi:~ $ cat ./caen_screen.sh
if ! screen -list | grep -q "caenhv"; then
	screen -f -S caenhv /dev/ttyACM0 9600
else
	screen -x caenhv
fi


pi@raspberrypi:~ $ cat ./check_usbs.sh
#!/bin/bash

declare -A NAMEMAP


NAMEMAP[FTDI_Chipi-X_FT2LC9OO]="BNC PB-5 Pulser"
NAMEMAP[CAEN_SPA_NIM_Desktop_HV_Power_Supply]="CAEN HV Supply"
NAMEMAP[FTDI_USB__-__Serial]="CAEN NIM Crate"
NAMEMAP[FTDI_FT232R_USB_UART_A502KOX3]="AIDA PSU Relay"

#for sysdevpath in $(find /sys/bus/usb/devices/usb*/ -name dev); do     (         syspath="${sysdevpath%/dev}";         devname="$(udevadm info -q name -p $syspath)";         [[ "$devname" == "bus/"* ]] && exit;         eval "$(udevadm info -q property --export -p $syspath)";         [[ -z "$ID_SERIAL" ]] && exit;         echo "/dev/$devname - $ID_SERIAL";     ); done


for sysdevpath in $(find /sys/bus/usb/devices/usb*/ -name dev); do (
	syspath="${sysdevpath%/dev}"
	devname="$(udevadm info -q name -p $syspath)"
	[[ "$devname" == "bus/"* ]] && exit
	[[ "$devname" != *"tty"* ]] && exit
	eval "$(udevadm info -q property --export -p $syspath)"
	[[ -z "$ID_SERIAL" ]] && exit
	echo "/dev/$devname - $ID_SERIAL - ${NAMEMAP[$ID_SERIAL]}" )
done

09.45 Power up

10.15 Bias +60V +5.95uA

10.22 Bias +60V +5.60uA

10.21 Bias +100V +21.1uA unstable

10.27 Bias +80V +10.1uA unstable

10.37 Bias + 60V +5.70uA stable

11.02 Bias +60V +5.78uA stable

11.22 CAEN N1419ET floating output ( internal LK removed )
      Bias +100V +6.35uA

11.26 Bias +100V +10.59uA slowly increasing

11.39 Bias +100V +10.39uA unstable

      Slow comparator 0x64 observe high ADC data item stats for aida10 & aida12 - attachment 1 - expected rate 25Hz x 64 = 1600 - problem with this wafer and/or adaptor PCBs?  
      N.B. aida04 asic #1 is u/s and running at very high rates 
      N.B. rates in aida10 & aida12 dominated by a few hot channels ( not the usual suspects ) - attachment 2

12.00 Bias +100V +13.0uA unstable

12.20 Bias +100V 12.535uA unstable

15.00 DSSSD bias +60V +6.44uA - breakdown above c. 60V, bias +100V leakage current +20-30uA

      Slow comparator 0xa 

      aida03 LK3 fitted

      CAEN N1419ET grounded outputs
      HV#1 core aida04. braid aida10, aida1 & aida 9 

      BNC PB-5 
      Amplitide 10.0V
      Attenuation x10
      Decay time 1ms
      Polarity +
      Tail
      Frequency 25Hz

      test +/ test - daisy chains connected
      test - disconnected at EG&G Ortec 534 output

12.50 Power up

      All system wide checks OK

      per FEE64 p+n 1.8.W spectra 20us FSR - attachments 3-4
      per FEE64 p+n 1,8.L spectra - attachment 6
       aida01 pulser peak width 15 ch FWHM
      per FEE64 Rate spectra - attachment 5


      BNC PB-5 pulser
      Amplitude 10.0V
      Attenuation x10
      Decay 1ms
      Frequency 25Hz
      Polarity + ( n+n Ohmic test input from EG&G Ortec 534 Sum & Invert Amplifier not connected )
      Clamp ON

      ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64


      FEE64 temperatures OK - see attachment 1
      ADC data item stats OK - see attachment 2

The Honeywell HSS-DPS dew point sensor indicator ( red LED ) is flashing c. 0.5Hz indicating humiidity > 90+/-3 %

Hanna HI9565 report d.p. 8.3 deg C, RH 36%, temperature 25 deg C

S4 area coolant water cntrols indicate water temperature 19 deg C. No evidence of condensation on AIDA coolant manifold.

Sensor fault?

12.54 Power up

      All system wide checks OK

      per FEE64 p+n 1.8.W spectra - attachments 5-10
       20us, 200us and 2000us FSR
      per FEE64 p+n 1,8.L spectra - attachment 3
       aida01 pulser peak width 15 ch FWHM
      per FEE64 Rate spectra - attachment 4


      BNC PB-5 pulser
      Amplitude 10.0V
      Attenuation x10
      Decay 1ms
      Frequency 25Hz
      Polarity + ( n+n Ohmic test input from EG&G Ortec 534 Sum & Invert Amplifier not connected )
      Clamp ON

      ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64


      FEE64 temperatures OK - see attachment 2
      ADC data item stats OK - see attachment 1


      MSL type BB18 24cm c 8cm DSSSD 3208-3/-21/-22

      p+n junction side - 21 Ohm resistnace between bias pins
      n+n Ohmic side - 152 Ohm resistance between bias pins
 
      => all bias bond wires OK

17.00 USB-controlled ac mains relay - no water interlock ( yellow ) LED
      Water temperature ( station outside S4 entrance ) c. 19 deg C and pressure OK
      Flow can be felt on rubber outflow pipe from water manifold

      Failure of sensor or interlock box?

      *** Bypass interlock

16.58 Power ON

17.05 FEE64 temperatures OK - see attachment 


      All system wide checks OK

      per FEE64 p+n 1.8.W spectra - attachments 2-42021Apr29-13-16-00
      per FEE64 p+n 1,8.L spectra - attachment 5
       aida01 pulser peak width 15 ch FWHM
      per FEE64 Rate spectra - attachment 6 


      BNC PB-5 pulser
      Amplitude 10.0V
      Attenuation x10
      Decay 1ms
      Frequency 25Hz
      Polarity + ( n+n Ohmic test input from EG&G Ortec 534 Sum & Invert Amplifier not connected )
      Clamp ON

      ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64

17.28 FEE64 temperatures - attachment 7
       all < 1 deg C difference cf. 17.05
      ADC data item stats OK - attachment 8

19.06 FEE64 temperatures OK - attachment 9

Noise test of CAEN N1419B in T9, STFC DL.

CAEN N1419B configured for floating output ( internal jumper removed ), +50V

DSO y: AC/1M x: 10us, 4us & 1us/div single shot/run 

Some HF noise transients observed but amplitude c. 5mV p to p.Noise otherwise appears to be white << 5mV rms.

Test of ( previously bench-tested OK ) AIDA ASIC mezzanines using FEE64 nnlycca5 ( MAC d8:80:39:41:d7:c3 )

AIDA test station STFC DL, T9 - see attachments 12-13

Pulser BNC PB-5

Amplitude 1.0V
Attenuation x1
Polarity +
Frequency 100Hz
Tail pulse, decay time 1ms
Delay 250ns (min)

ASIC settings 2021Jul12-14.50.48
Slow comparator 0x2f

Adaptor PCB - PJCS


FEE64 temperatures OK


Rate/HitRate spectra OK

LEC spectra OK
Data observed for all channels of all ASIC #1-4
Pulser peak widths *.8.L

Wave spectra OK
Data observed for all channels of all ASIC #1-4


Date/time          ASIC mezzanine          Pulser peak width   Status
                   serial #                (channels FWHM)
30.8.23 14:00      GOC-7226-1-11           13, 7, 11, 11       OK
30.8.23 15:15      GOC-7226-1-19           9, 7, 8, 8          OK      Rate, HitRate, *.*.L, *.*.W spectra ( 20us FSR ) - see attachments 1-11
30.8.23 16:00      GOC-7226-1-37           8, 7, 8, 7          OK
30.8.23 16:30      GOC-7226-1-39           6, 8, 9, 8          OK
30.8.23 17:00      0213110101-0029         9, 7, 8, 7          OK 
30.8.23 17:30      0216240101-0008         9, 7, 8, 7          OK

31.8.23 10:50      0216240101-0040         11, 8, 9, 8         OK
31.8.23 11:30      GOC-7226-1-31           9, 9, 9, 8          OK
31.8.23 11:50      GOC-7226-1-23           9, 8, 7, 7          OK
31.8.23 12:10      GOC-7226-1-34           8, 7, 8, 7          OK

31.8.23 13:55      0261690101-0040         8, 7, 8, 7          OK


0261690101-0002, 0261690101-0012 by AIDA test bench, T9   Mezzanine book 2 indicates that these FEE64s have been tested OK ( 03/08 ) with a FEE64

6x untested FEE64 mezzanines in AIDA cupboard, T9

Silena 7710 - see attachment 1

Bias -60V


Without ac mains filter - attachments 2-6 

DSO ch#1 AC/1M - y: 10mV/div x: 100ns, 200ns, 1us, 2us & 10us/div



With ac mains filter - attachments 7-11
( see https://elog.ph.ed.ac.uk/nToF/67 attachments 2 & 3 )

DSO ch#1 AC/1M - y: 10mV/div x: 100ns, 200ns, 1us, 2us & 10us/div


Conclusion - Claud Lyons Ltd STF Series Surge & Transient Power Filter makes little observable difference to HF noise transients observed

Silena 7710 - see attachment 1

Bias -60V

DSO ch#1 AC/1M - y: 20mV/div x: 100ns, 200ns, 1us, 2us & 10us/div  - attachments 2-6

BNC PB-4 - see attachment 1

Amplitude 35,000
Attenuators all OUT
Risetime 50ns
Decay time 1ms
Tail pulse
Polarity +
Frequency 2Hz (min)
Delay min

DSO ch#1 DC/1M - y: 5mV/div x: 100ns, 200ns, 1us, 2us & 10us/div  - attachments 2-6



BNC PB-5 - see attachment 7-9

Amplitude 1.0V
Attenuation x1
Decay time 1ms
Tail pulse
Polarity +
Frequency 2Hz (min)
Delay 250ns (min)

DSO ch#1 DC/1M - y: 5mV/div x: 100ns, 200ns, 1us, 2us & 10us/div  - attachments 10-14



BNC PB-5 - see attachment 15-16

Amplitude 10.0V
Attenuation x10
Decay time 1ms
Tail pulse
Polarity +
Frequency 2Hz (min)
Delay 250ns (min)

DSO ch#1 DC/1M - y: 5mV/div x: 100ns, 200ns, 1us, 2us & 10us/div  - attachments 17-21



Conclusion 

BNC PB-5 significantly noisier than BNC PB-4. Results consistent with GSI tests https://elog.ph.ed.ac.uk/AIDA/886 , i.e. AIDA BNC PB-5 pulser at GSI *not* faulty.
BNC PB-5 operation with 10.0V/10x ( cf. 1.0V/x1 ) shows lower level of noise but still worse than BNC PB-4.

5mV transient at test input ( C_t = 0.7pF ) = 3.5fC = 80keV Si equivalent ( check 1V x 0.7pF = 0.7pC = 16MeV OK ). 

Tests with the HV supply (CAEN N1419ET) and Pulse Generator ( BNC PB-5 ) in the detector lab on the crate behind the DEGAS detectors, carried out the 9th August 2023

Both modules were plugged

Test 1: pulse generetor on 2 Hz

- DC, 50 ohm - HV OFF - attachment 1

- DC, 50 ohm - HV OFF, Zoom on the noise - attachment 2

- DC, 50 ohm - HV 50 V, Zoom on the noise - attachment 3

Test 2: HV supply Channel 1 - CORE and 2 - BRAID, pulse generator still on

- AC 1 Mohm - HV OFF - attachment 4

- AC 1 Mohm - HV 50 V - attachment 5

No differences were observed between crate OFF, HV OFF and HV 50 V. An important periodic noise (green on the pictures) was observed and was significantly smaller when unpluging the HV module from the crate. The thickness of the baseline noise seems to be comparable to entry 882, attachment 33-35.

10.45 Power cycle and reboot

     DSSSD bias +100V leakage current +8.365uA

     All system wide checks OK

     Slow comparator 0x64

     per FEE64 rate spectra - attachment 1
     per FEE764 1.8.W spectra - attachments 16 & 17 ( ignore attachments 2 & 3 - bias off/low )
     adc data item stats - attachment 4


     slow comparator 0xf

     per FEE64 rate spectra - attachment 5
     adc data item stats - attachment 6


     slow comparator 0xe

     per FEE64 rate spectra
     adc data item stats - attachment 7


     slow comparator 0xd

     per FEE64 rate spectra - attachment 8
     adc data item stats - attachment 9


     slow comparator 0xc

     per FEE64 rate spectra - attachment 10
     adc data item stats - attachment 11

     slow comparator 0xb

     per FEE64 rate spectra - attachment 12
     adc data item stats - attachment 13


     slow comparator 0xa

     per FEE64 rate spectra - attachment 14
     adc data item stats - attachment 15

07.00 DAQ stopped
      Overnight run for background alphas

10.07 FEE64 temperatures OK - attachment 1
      DSSSD bias +100V leakage current +8.210uA - attachment 2

      Stats - attachments 3-12


     per FEE64 1.8.W spectra 200us FSR - attachments 21-22
     per FEE64 rate spectra - attachment 23

15.16 DSSSD bias +100V leakage current +8.415uA

      ThorLabs filters removed
      Test + & test - signals disconnected at outputs of BNC PB-5 and EG&G Ortec 534

      aida02 & aida04 LK1 installed, aida01 LK3 not installed
      aida03 LK3 installed

      test + & test- daisy chains installed

      HV daisy chain - core -  aida12, aida03, aida11
      HV daisy chain - braid - aida04


      slow comparator 0xa     p+n FEE64 rates high ( 50-125k ) 

      per FEE64 rates - attachment 1
      per FEE64 1.8.W spectra 200us FSR - attachments 2-3
      adc data item stats - attachment 4


      slow comparator 0xc    p+n FEE64 rates OK ( 15-40k ) dominated by 'hot' channels, low per channel rates in aida11, aida03, aida12

      per FEE64 rates - attachment 5-6
      adc data item stats - attachment 7


      slow comparator 0xf    p+n FEE64 rates low ( 7-17k ) entirely dominated by 'hot' channels

      per FEE64 rates - attachment 8
      adc data item stats - attachment 9


      slow comparator 0x14    

      per FEE64 rates - attachment 10-11
      adc data item stats - attachment 12


      slow comparator 0x19    

      per FEE64 rates - attachment 13
      adc data item stats - attachment 14


      slow comparator 0x1e    

      per FEE64 rates - attachment 15
      adc data item stats - attachment 16

      slow comparator 0x23    

      per FEE64 rates - attachment 17
      adc data item stats - attachment 18


     slow comparator 0x28    

      per FEE64 rates - attachment 19-20
      adc data item stats - aattachment 21


      Ignoring 'hot' channels, reduce rates to < 50Hz/channel for p+n slow comparator threshold 120-150keV and n+n slow comparator threshold 350-400keV 
      If we assume that this estimates the 5x sigma threshold => p+n sigma c. 27keV rms, 64keV FWHM and n+n sigma c. 75keV rms, 176keV FWHM

      Given FEE64-DSSSD cable lengths, optimal p+n performance is c. 40-50keV FWHM so current tests begin to approach this - little extrinsic noise observed for preamp signals
      We continue to observe significant ( though very much improved ) extrinsic noise for n+n strips so current noise performance could be improved by x2-3.



18.42 slow comparator 0x64
      stats & histograms zero'd

      DSSSD bias +100V leakage current +9.040uA

10.20 DSSSD bias +100V leakage current +6.565uA - attachment 1

      All system wide checks OK - attachments 2-7
       why is SYNC rollover target 0xe?

      FEE64 temps OK - attachment 8

      per FEE64 1.8.W spectra 20us FSR - attachments 9-10
      slow comparator 0x64
      per FEE64 rate spectra - attachment 11
      ADC data item stats - attachment 12

      slow compararator 0x14
      ADC data item stats - attachment 13



11.10 Test + & test - cables disconnected at the outputs of the BNC PB-5 and EG&G Ortec 534


      slow comparator 0xf                      p+n rates dominated by 'hot' channels *except* aida03 & aida09
      per FEE64 rate spectra - attachment 14
      ADC data item stats - attachment 15

      slow comparator 0xa                      p+n rates high ( 100-200k )
      per FEE64 rate spectra - attachment 16
      ADC data item stats - attachment 17


      slow comparator 0x14                      p+n rates entirely due to 'hot' channels
      per FEE64 rate spectra - attachment 18
      per FEE64 1.8.W spectra 20us FSR - attachments 19-20
      ADC data item stats - attachment 21


11.27 Remove ground cable from Al base plate to aida02 FEE64 adaptor PCB

      slow comparator 0xf                      p+n rates entirely due to 'hot' channels
      per FEE64 1.8.W spectra 20us FSR - attachments 22-23
      per FEE64 rate spectra - attachment 25
      ADC data item stats - attachment 24


      slow comparator 0xa                      p+n rates high ( 30-130k ) but lower than previously
      per FEE64 rate spectra - attachment 26
      ADC data item stats - attachment 27

11.48 DSSSD bias +100V leakage current +7.845uA

      Remove LK3 ( local HV ground middle Si wafer )

      slow comparator 0xa                      p+n rates high ( 55-135k ) but increase in rates appears to be due to 'hot' channels
      per FEE64 1.8.W spectra 20us FSR - attachments 28-30
      per FEE64 rate spectra - attachment 31
      ADC data item stats - attachment 32



      CAEN N1419ET ch #2 output connected to Tek TDS 210 DSO - powered from relay #6

      ch 1 - ac - HV braid
      ch 2 - ac - HV core

      ch # 2 OFF - attachment 33
      ch # 2 + 50V 0.000uA - attachments 34-35

      with additional ThorLabs filter
      ch # 2 + 50V 0.000uA - attachment 39


      ch 2 - dc, hi Z

      test -    attachments 36-37
      test +    attachment 38

12.45 Install ThorLabs filter HV core ( *no* filter for HV braid )

      slow comparator 0xa             p+n rates high ( 40-130k ) but p+n rates dominated by 'hot' channels *except* aida03, aida11, aida12 where rates are generally higher per strip
      per FEE64 rate spectra - attachment 40
      per FEE64 1.8.W spectra 20us FSR - attachments 41-42
      ADC data item stats - attachment 43
      


14.55 Install ThorLabs filter HV braid ( filters for both HV core & braid )

      slow comparator 0xa            p+n rates high ( 50-150k ) two filters probably somewhat worse than one filter
      per FEE64 rate spectra - attachment 46
      per FEE64 1.8.W spectra 20us FSR - attachments 44-45
      ADC data item stats - attachment 47


      Overall, effect of ThorLabs filters appears to belimited. Perhaps not unexpected as FEE64 adaptor PCBs also have a HV RC filter. 


      

16.22 Add LK1 to aida01
      DSSSD bias -100V leakage current -7.950uA

     Slow comparator 0x14
      per FEE64 1.8.W spectra 200us FSR - attachments 2-3
      ADC data item stats - attachment 4
      per FEE64 rate spectra - attachment 1

      Noise worse for n+n FEE64s esp. aida04

17.28 Ground Al base plate to aida02 FEE64 adaptor PCB - appears to be marginally worse than without ground

      per p+n FEE64 1.8.L spectra - attachments 8-9
       aida01 pulser peak width 116 ch FWHM
      per FEE64 1.8.W spectra 200us FSR - attachments 10-11
      per FEE64 rate spectra - attachment 6-7
      ADC data item stats - attachment 5

09.40 Al snout electrically connected ( < 1 Ohm ) to Al gasket and Al base plate
      Al snout electrically isolated ( > 20 MOhm ) from aida02 FEE64 adaptor PCB and AIDA support frame

      FEE64 temperatures OK - attachment 1
      DSSSD bias +100V leakage current +7.565uA - attachment 2

      All system wide checks OK

      Slow comparator 0x64
      per FEE64 rate spectra - attachment 3
      per p+n FEE64 1.8.L spectra - attachments 4-5
       aida01 pulser peak width 134 ch FWHM
      per FEE64 1.8.W spectra 200us FSR - attachments 6-7
      ADC data item stats - attachment 8

      Slow comparator 0x14
      ADC data item stats - attachment 9
      per FEE64 rate spectra - attachment 10




      Ground Al base plate to aida02 FEE64 adaptor PCB - appears to be marginally worse than without ground

      per p+n FEE64 1.8.L spectra - attachments 11-12
       aida01 pulser peak width 120 ch FWHM
      per FEE64 1.8.W spectra 200us FSR - attachments 13-14
      per FEE64 rate spectra - attachment 15
      ADC data item stats - attachment 16


11.48 DSSSD bias +100V leakage current +11.055uA

      Ground Al base plate to AIDA support frame - appears to be significantly worse than without ground

      per FEE64 1.8.W spectra 200us FSR - attachments 17-18
      per p+n FEE64 1.8.L spectra - attachments 19-20
       aida01 pulser peak width 150 ch FWHM
      per FEE64 rate spectra - attachment 21
      ADC data item stats - attachment 22


11.48 DSSSD bias +130V leakage current +35.05uA

      Ground Al base plate to aida02 FEE64 adaptor PCB - additional bias makes no significant difference

      per FEE64 rate spectra - attachment 23
      per p+n FEE64 1.8.L spectra - attachments 24-25
       aida01 pulser peak width 118 ch FWHM
      per FEE64 1.8.W spectra 200us FSR - attachments 26-27
      ADC data item stats - attachment 28



14.03 DSSSD bias +100V leakage current +10.7uA
      Ground Al base plate to aida02 FEE64 adaptor PCB - re-check
      per FEE64 1.8.W spectra 200us FSR - attachments 28-29
      ADC data item stats - attachment 30




15.10 Add DSSSD HV cable from aida04 to aida02 - significantly worse
      Ground Al base plate to aida02 FEE64 adaptor PCB - re-check
      per FEE64 1.8.W spectra 200us FSR - attachments 31-32
      ADC data item stats - attachment 33




15.37 Switch from - to + polarity detector HV
      N1419ET from ch #3 to ch #2, all outputs non-floating
      LK1 ( local HV ground )removed from aida12, aida03, aida11 - installed aida04 
      LK3 ( DSSSD PCB ground ) installed aida03 ( no change )
      HV #1 core aida12, aida03, aida11 - braid aida04
      test + chain aida9, aida01, aida10, aida12, aida03, aida11 - connected to BNC PB-5 pulser
      test - chain aida04, aida02 - not connected to pulser

      AIDA PSU cabling per https://elog.ph.ed.ac.uk/AIDA/879
      HV cable aida04 to aida02 - removed
      Ground Al base plate to aida02 FEE64 adaptor PCB - removed

      FEE64 temperatures OK - attachment 35
      DSSSD bias -100V leakage current -7.155uA - attachment 36

      Slow comparator 0x14
      per FEE64 rate spectra - attachment 37
      per p+n FEE64 1.8.L spectra - attachments 38-39
       aida01 pulser peak width 123 ch FWHM but note double peaking
      per FEE64 1.8.W spectra 200us FSR - attachments 40-41
      ADC data item stats - attachment 42
      Slow comparator 0x64
      ADC data item stats - attachment 43

      Very similar performance to + polarity DSSSD HV tests

      
16.05 Add LK1 to aida02
      DSSSD bias -100V leakage current -7.770uA

      Slow comparator 0x14
      per FEE64 1.8.W spectra 200us FSR - attachments 44-46
      ADC data item stats - attachment 47
      per FEE64 rate spectra - attachment 48

      Improved noise for n+n FEE64s esp. aida04

09.50 DSSSD bias +100V leakage current +9.255uA - attachment 2

      FEE64 temperatures OK - attachment 1

      All system wide checks OK

      per FEE64 1.8.W spectra 20 & 200us FSR - attachments 3-6

      per p+n FEE64 1.8.L spectra - attachments 7-8
       aida01 pulser peak width 87 ch FWHM

      adc data item stats - slow comparator 0x64, 0x14, 0xa - attachments 15, 14, 11
      per FEE64 rate spectra - attachments 9-10, 12-13


from https://elog.ph.ed.ac.uk/AIDA/872

13x FEE64s installed - see attachment 2 ( courtesy NH )

FEE64 #    Cable set #
1          1
2          2
3          3
4          4
5
6          6
7
8          8
9          9
10         5
11         11
12         7
15          

Change AIDA PSU cabling from

#1 1-3 2-4 5-6 7-8
#2 9-10 11-12 13-14 15-16

to

#1 1-3 2-4 5-7 9-11
#2 6-8 10-12 13-14 15-16

     DSSSD bias +100V leakage current +11.765uA

     per FEE64 1.8.W spectra 200us FSR - attachments 16-17

      per p+n FEE64 1.8.L spectra - attachments 18-19
       aida01 pulser peak width 158 ch FWHM ( note double peaking )

      adc data item stats - slow comparator 0x64, 0x14 - attachments 23, 21
      per FEE64 rate spectra - attachments 20, 22


     DSSSD bias +30V leakage current +35.8uA





13.35 DSSSD bias +100V leakage current +11.785uA

      aida04 34-way cable #1 connected to ASIC #1 & 2 disconnected from adaptor PCB

      per FEE64 1.8.W spectra 2000us FSR - attachments 26-27

      adc data item stats - slow comparator 0x64, 0x14 - attachments 29-30
      per FEE64 rate spectra - attachment 28


16.20 Install LK2 & LK4 aida12, aida03, aida11 ( front & rear field plate ground )

      DSSSD over current ( 200uA @ c. 30V ) - high resistance short?

      LK2 & LK4 installed aida12 *only* - OvC
      LK2 & LK4 installed aida11 *only* - OvC
      LK2 & LK4 installed aida3 *only* - OvC

      LK2 installed aida3 *only* - OvC ( LK2 = rear field plate )

      All front & rear field plate connections appear to provide a high resistance short to ground for detector bias. This may be related to issues observed biasing DSSSD via aida01 & aida09 - https://elog.ph.ed.ac.uk/AIDA/874
      But why does it affect aida12 too?

10.43 DSSSD bias +100V leakage current +7.550uA


      + bias - core aida04, braid aida12, LK1 ( HV local ground ) fitted aida03, aida11 *not* aida12
      bias bonds aida01 and aida09 probably broken
      aida03 LK3 ( DSSSD PCB ground ) fitted

      ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64

      FEE64s 1, 3, 9, 10, 11, 12  + input polarity
      FEE64s 2, 4, 6, 8           - input polarity

      BNC PB-5 pulser
      amplitude 1.0V
      attenuation x1
      tail pulse
      tau_d 1ms
      frequency 100Hz
      polarity +

      EG&G Ortec 534 Sum & Invert Amplifier
      to provide - polarity test inputs
      Test + and - signals daisy-chained to FEE64s - end of daisy-chain terminated by 50 Ohms.

      Adaptor PCB

      AIDA Half Rev B 180623 fitted FEE64s 1, 2, 3, 4, 9, 10, 11, 12
      AIDA Half Rev A 120418 fitted FEE64s 6, 8

      AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV
      DSSSD #1 - adaptor PCB ribbon cable drain wires connected to respective adaptor PCB ground
      DSSSD #2 ( not installed ) adaptor PCB ribbon cable and ribbon cable drain wires floating
      AIDA Half rev B adaptor PCBs DSSSD#1 - FEE64 cooling plate - adaptor PCB ground *not* connected
      AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV - FEE64 cooling plate - adaptor PCB ground fitted
      ground to AIDA support frame *not* connected
      test + / test - *not* connected




      per FEE64 1.8.W spectra 20 & 200us FSR - attachments 1-2, 14-15

      per FEE64 p+n junction 1.8.L spectra - attachments 3-4
       aida01 pulser peak width 136 ch FWHM ( note double peaking )

      per FEE64 rate spectra - attachment 5
       no test - input

      adc data item stats - attachment 6
      slow comparator 0x64
       note aida04 asic #1 u/s

      system wide checks - *all* OK - attachments 7-11

      FEE64 temps OK - attachment 12

      DSSSD bias - attachment 13

      adc data item stats - attachment 16
      slow comparator 0x14


12.28 LK1 ( local HV ground ) removed from aida03 & aida11 ( already removed from aida12 )

      adc data item stats
      per FEE64 1.8.W spetcra 20us FSR - attachments 17-19

      DSSSD bias +100V leakage current +6.525uA


14.40 DSSSD bias +100V leakage current +6.230uA

      LK1 ( local HV ground ) installed aida12 *only*

      adc data item stats
      per FEE64 1.8.W spectra 20us FSR
      per p+n FEE64 1.8.L spectra - attachments 20-24
       aida12 pulser peak width 196 ch FWHM



14.40 DSSSD bias +100V leakage current +11.485uA

      LK1 ( local HV ground ) installed aida03, aida11, aida12

      adc data item stats - slow comparator 0x64
      per FEE64 rate spectra
      per FEE64 1.8.W spectra 20us FSR
      per p+n FEE64 1.8.L spectra - attachments 25-30
       aida12 pulser peak width 135 ch FWHM ( note double peaking )


      adc data item stats - slow comparator 0x14
      per FEE64 rate spectra 
       p+n FEE64 rates dominated by edge strips  
      per FEE64 1.8.W spectra 200us FSR
      per p+n FEE64 1.8.L spectra - attachments 31-35



17.15 Test - disconnected from pulser
      Connect test daisy chain cable from aida04 to aida02 (50 OHm termination)

      adc data item stats - slow comparator 0x14 & oxa
      per FEE64 rate spectra - slow comparator 0x14
       p+n FEE64 rates dominated by edge strips  
      per FEE64 1.8.W spectra 200us FSR
      per p+n FEE64 1.8.L spectra - attachments 36-44
       aida01 pulser peak width 89 ch FWHM




     

09.54 DSSSD#1 bias +100V leakage current +9.065uA

      ADC data item stats
      per FEE64 1.8.W spectra 20us & 200us FSR - see attachments 1-5


10.02 aida04 asic#1 u/s - see attachments 6-7

10.39 AIDA PSU#1 FEE64s 1,2 3, 4, 5, 6, 7, 8 -> 1, 3, 2, 4, 5, 6, 7, 8

      
      ADC data item stats ( slow comparator 0x64 & 0x14 )
      per FEE64 1.8.W spectra 20us & 200us FSR - see attachments 8-12

11.08 Test + connected aida09, 01, 10, 12, 3 & 11
      SSSD#1 bias +100V leakage current +12.150uA

      ADC data item stats ( slow comparator 0x14 )
      per FEE64 rate, 1.8.L & 1.8.W spectra 20us FSR - see attachments 13-18
      aida01 pulser peak width 134 ch FWHM

Options and system cosnole disagree about which version of the DataAcq program is in use?

09.50 Cooknell HV2
      2x + polarity, grounded HV channels

      + bias - core aida04, braid aida12, LK1 ( HV local ground ) fitted aida12, aida03, aida11
      bias bonds aida01 and aida09 probably broken
      aida03 LK3 ( DSSSD PCB ground ) fitted

      
      AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV
      DSSSD #1 - adaptor PCB ribbon cable drain wires connected to respective adaptor PCB ground
      DSSSD #2 ( not installed ) adaptor PCB ribbon cable and ribbon cable drain wires floating
      AIDA Half rev B adaptor PCBs DSSSD#1 - FEE64 cooling plate - adaptor PCB ground *not* connected
      AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV - FEE64 cooling plate - adaptor PCB ground fitted
      ground to AIDA support frame *not* connected
      test + / test - *not* connected
      

      DSSSD#1 3208-3/-21/-22
      bias +100V leakage current +8.7uA - attachments 1-11
      per FEE64 1.8.W spectra 20us & 200us FSR


09.58 + bias - core aida04, braid aida12, LK1 ( HV local ground ) *not* fitted aida12 & fitted aida03, aida11
      see attachments 12-14

17.00 aida04 *only* adaptor PCB connected to AIDA support frame
      FEE64 ADC data item stats > 200k for all FEE64s 


17.45 FEE64 spower cycled
      CAEN N1419ET 
      Internal LK installed - all outputs grounded
      bias +100V leakage current +12.2uA - attachments 15-19
      + bias - core aida04, braid aida12, LK1 ( HV local ground ) *not* fitted aida12 & fitted aida03, aida11

09.20 CAEN N1419ET 
      Floating outputs
      Channel #3 + polarity, Channels #0-2 - polarity
      Channel #3 - HV cable #1

      + bias - core aida04, braid aida12, LK1 ( HV local ground ) fitted aida12, aida03, aida11
      bias bonds aida01 and aida09 probably broken
      aida03 LK3 ( DSSSD PCB ground ) fitted

      
      AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV
      DSSSD #1 - adaptor PCB ribbon cable drain wires connected to respective adaptor PCB ground
      DSSSD #2 ( not installed ) adaptor PCB ribbon cable and ribbon cable drain wires floating
      AIDA Half rev B adaptor PCBs DSSSD#1 - FEE64 cooling plate - adaptor PCB ground *not* connected
      AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV - FEE64 cooling plate - adaptor PCB ground fitted
      ground to AIDA support frame *not* connected
      test + / test - *not* connected
      

      DSSSD#1 3208-3/-21/-22
      bias +120V leakage current +17.13uA - attachments 1-14
      per FEE64 1.8.W spectra - 200us FSR - attachments 1-2
      per FEE64 1.8.W spectra - 20us FSR - attachments 3-4

      bias +100V leakage current +8.35uA - attachments 15-17
      per FEE64 1.8.W spectra - 200us FSR

      bias +0V leakage current +0uA - attachments 18-20
      per FEE64 1.8.W spectra - 200us FSR



14.25 bias +100V leakage current +10.83uA - attachments 21-22
      per FEE64 1.8.W spectra - 200us FSR
      CAEN channel #3 cable moved from cable tray to floor

14.50 bias +100V leakage current +11.15uA - attachments 23-24
      per FEE64 1.8.W spectra - 200us FSR
      CAEN N1419ET moved to Weiner NIM bin LHS 19" rack channel #3 cable across floor to AIDA stand
      HV cables channels #0-2 disconnected

15.20 All ERNI pins of aida01 adaptor PCB OK => FEE64 #1 ASIC #2 channel #5 issue faulty test C? faulty ASIC channel?

      Fitted drain wire from aida06 & aida08 adaptor PCBs to FEE64 cooling plates

      n+n FEE64 1.8.W spectra 20us FSR - attachments 1-2

      p+n FEE64 1.8.W spectra 20us FSR - attachments 3

      p+n FEE64 1.8.L spectra - attachment 4
       aida01 1.8.L pulser peak width 15 ch FWHM

      n+n FEE64 1.8.L spectra - attachment 5
       double peak spectra

      Significant improvement in noise for aida06 & aida08 but still not as good as aida02 & aida04. Some additional extrinsic noise observed for aida02 & aida04.

      No change in 1.8.L spectra

      n+n FEE64 1.8.W spectra aida02 200us FSR, other FEE64s 20us FSR - attachments 6
       baseline sinusoid observed - 4T = 320 samples = 64us = 15.6kHz

15:50 BNC PB-5
      switch polarity + to -
      switch BNC cables from BNC PB-5 and EG&G Ortec 534 outputs for test +/-

      Attachments 7-8
       baseline sinusoid observed for p+n *not* n+n FEE64 1.8.W spectra
       suggests issue is EG&G Ortec 534

      Restore original cabling



16.55 Swap aida09 HDMI cable from MACB #4 port 1 to MACB #5 port 1 - power cycle and restart - no change - aida09 clock not locked

      Replace aida09 HDMI with *new* HDMI cable to MACB # 4 port 1 - power cycle and restart - aida09 clock locked


      FEE64 temperatures OK - attachment 9

      System wide checks - attachments 10-15
      OK *except* cannot calibrate aida12 ADCs

      per FEE64 rate spectra - attachment 16

      p+n FEE64 1.8.L spectra - attachments 17
       aida01 1.8.L pulser peak width 15 ch FWHM

      n+n FEE64 1.8.L spectra - attachments 18
       double peak spectra

      p+n FEE64 1.8.W spectra 20us FSR - attachments 19-20

      n+n FEE64 1.8.W spectra 20us FSR - attachments 21-22


17.10 n+n FEE64 1.8.W spectra 200us FSR
       BNC PB-5 decay time 50us - attachment 23
       BNC PB-5 decay time 1ms - attachment 24


18.05 ADC data item stats

      slow comparator 0x64 -> 0xa
      BNC PB-5 pulser frequency 100Hz so expect rate of ADC data items per FEE64 to be c. 6.4kHz
  
      attachment 25 - aida06 & aida08 ground from FEE64 cooling plate to adaptor PCB fitted, test - connected to aida02, aida04, aida06 & aida08
      attachment 26 - aida06 & aida08 ground from FEE64 cooling plate to adaptor PCB fitted, test - disconnected from aida02, aida04, aida06 & aida08
      attachment 27 - aida06 & aida08 ground from FEE64 cooling plate to adaptor PCB not fitted, test - disconnected from aida02, aida04, aida06 & aida08

      Rev A adaptors require grounding (as expected). Output of EG&G Ortec 534 produces c. 15kHz sinsusoid at test input - cable length/capacitative load?
      
      

Saturday 15 July

Cooling water ON - temperature c. +19 deg C ( controls adjacent to S4 entrance )
Flow taps ON ( S4 )
Cannot see float in mechanical flow gauge - sediment?
USB-controlled ac mains relay flow interlock ON.
Flow vibration can be felt in cooling manifold and lines. 


13x FEE64s installed - see attachment 2 ( courtesy NH )

FEE64 #    Cable set #
1          1
2          2
3          3
4          4
5
6          6
7
8          8
9          9
10         5
11         11
12         7
15          



10x FEE64s configured - update /MIDAS/config/TclHttpd/aidas-gsi@8015/startup.tcl - see attachment 1

ttyUSB1 aida01
ttyUSB3 aida12
ttyUSB4 aida02
ttyUSB6 aida03
ttyUSB7 aida04
ttyUSB9 aida11
ttyUSB10 aida09
ttyUSB12 aida10
ttyUSB13 aida08
ttyUSB15 aida06


Update /etc/dhcp/dhcpd.conf - correct MAC address aida09

from 

   host aida09 {
     hardware ethernet d8:80:39:41:ee:01;
     fixed-address 192.168.11.9;
    option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida09";
   }

to

   host aida09 {
     hardware ethernet d8:80:39:41:ee:10;
     fixed-address 192.168.11.9;
    option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida09";
   }

5x MACBs installed - see attachment 3
Note configuration setting 0x0 for all 5x MACBs ( cf. 0x3 per https://elog.ph.ed.ac.uk/DESPEC/517 )


17.30 System wide checks - see attachments 4-7
      OK *except* aida09 clock and WR decoder errors
      FEE64 temperatures OK - see attachment 8






Sunday 16 July

11.30 Restart

      FEE64 temperatures OK - attachment 9
      System wide checks - attachments 10-15
      aida09 clock errors - no WR timestamp
      aida09 WR status 0xd - attachments 16-18

      Local controls aida01 cf. aida09 - attachments 19-20
      status register 0xf cf. 0x4
      BuTIS interface control 0x3 cf. 0x0


14.00 ASIC settings 2021Apr29-13-16-00
      slow comparator 0x64

      FEE64s 1, 3, 9, 10, 11, 12  + input polarity
      FEE64s 2, 4, 6, 8           - input polarity

      BNC PB-5 pulser
      amplitude 1.0V
      attenuation x1
      tail pulse
      tau_d 1ms
      frequency 100Hz
      polarity +

      EG&G Ortec 534 Sum & Invert Amplifier
      to provide - polarity test inputs
      Test + and - signals daisy-chained to FEE64s - end of daisy-chain terminated by 50 Ohms.

      Adaptor PCB

      AIDA Half Rev B 180623 fitted FEE64s 1, 2, 3, 4, 9, 10, 11, 12
       *all* LKs fitted
      AIDA Half Rev A 120418 fitted FEE64s 6, 8
       *no* LKs fitted

      No drain wire connections from adaptor PCB to FEE64 cooling plate fitted



      per FEE64 rate spectra - attachment 21

      p+n FEE64 1.8.L spectra - attachments 22-23
       aida01 1.8.L pulser peak width 15 ch FWHM

      n+n FEE64 1.8.L spectra - attachments 24-25
       double peak spectra

      p+n FEE64 1.8.W spectra 20us FSR - attachments 26-28

      n+n FEE64 1.8.W spectra 20us FSR - attachments 29-31

      Observe significantly higher noise for rev A adaptors
      No data observed for aida09
      aida01 2.5.* data missing
      

      FEE64 statistics aida01, aida09, good events, ADC data, pause, resume, disc, correlation & WR 48-63 - attachments 32-40

Test of AIDA FEE64s 

ISOL test station STFC DL, T9

Pulser BNC PB-5

Amplitude 1.0V
Attenuation x1
Polarity +
Frequency 100Hz
Tail pulse, decay time 1ms
Delay 250ns (min)

ASIC settings 2019May22-10.19.28
Slow comparator 0x80

Adaptor PCB - PJCS


FEE64 temperatures OK
System wide checks OK
Statistics OK

Hit/HitRate spectra OK

LEC spectra OK
Data observed for all channels of all ASIC #1-4
Pulser peak widths *.8.L

Wave spectra OK
Data observed for all channels of all ASIC #1-4


Date/time          FEE64 MAC           Pulser peak width   Status
                                       (channels FWHM)
6.7.23 17:50       d8:80:39:41:d8:2a   17,17,16,15         OK
6.7.23 11:20       d8:80:39:41:b4:0b   7,7,7,7             OK
6.7.23 10:03       d8:80:39:41:d0:0e   12,12,12,12         OK
5.7.23 15.31       d8:80:39:41:d7:cc   6,6,6,6             OK
5.7.23 14:04       d8:80:39:41:a0:71   12,11,11,12         OK           Rate/Hitrate, *.*.L and *.*.W spectra - attachments 1-10
5.7.23 13:18       d8:80:39:42:0d:16   13,15,14,14         OK
5.7.23 12:43       d8:80:39:41:ee:71   17,17,15,16         OK

6.7.23 11:00       d8:80:39:42:0d:0b   17,15,16,15         https://elog.ph.ed.ac.uk/AIDA/870  Mezzanine replaced - ASIC #2 address bit #2 always on? ASIC #2 fail or mezzanine-FEE64 
connection 
issue?
7.7.23 09:46       d8:80:39:41:f6:ee                       https://elog.ph.ed.ac.uk/AIDA/869  HDMI replaced - not fully assembled - LEC fast comparator ASIC #1 channel #2 missing. ADC 
does not 
calibrate. HDMI issue?


OK FEE64s - attachment 11

Test of AIDA FEE64 d8:80:39:42:0d:0b ( aida03 ) - ASIC mezzanine replaced

ISOL test station STFC DL, T9

Pulser BNC PB-5

Amplitude 1.0V
Attenuation x1
Polarity +
Frequency 100Hz
Tail pulse, decay time 1ms
Delay 250ns (min)

ASIC settings 2019May22-10.19.28
Slow comparator 0x80

Adaptor PCB - PJCS


FEE64 temperatures OK - attachments 1


System wide checks OK - attachments 2-5


Statistics OK - attachments 6-7

Hit/HitRate spectra OK - attachment 8

LEC spectra - attachments 9-12

Data observed for all channels of ASIC #1, 3, & 4
Data observed (double peaks) ASIC#2 channels 4-7 & 12-15, no data observed channels 0-3 & 8-11 - ASIC#2 address bit #2 set always ON? ASIC #2 fail or Mezzanine-FEE64 
connection issue?
Typical pulser peak widths 15-17 channels FWHM ASIC #1-4


Wave spectra OK - attachments 13-16

19/7/23 removed mezzanine and cleaned contacts with ipa. cleaned FEE contacts. reassembled mezzanine to FEE and tested. ASIC 2 now ok.

Test of AIDA FEE64 d8:80:39:41:f6:ee ( aida01 ) - HDMI connector replaced. Cooling plate fitted - no base plate.
ISOL test station STFC DL, T9

Pulser BNC PB-5

Amplitude 0.5V
Attenuation x1
Polarity +
Frequency 100Hz
Tail pulse, decay time 1ms
Delay 250ns (min)

ASIC settings 2019May22-10.19.28 - attachment 1
Slow comparator 0x80

Options - attachment 2

Adaptor PCB - PJCS


FEE64 temperatures OK - attachments 3


System wide checks - attachments 4-9

FEE64 module aida01 global clocks failed, 6
 Clock status test result: Passed 3, Failed 1

FEE64 module aida01 failed
Calibration test result: Passed 3, Failed 1

Timestamp RAM values OK?


Statistics OK - attachments 10-11

Good WAVE events reported?


LEC spectra - attachments 12-15

Data observed for all channels of all ASICs - double peaking observed - may be due to incomplete FEE64 assembly? See attachment 17


Hit/HitRate spectra - attachment 16

OK *except*
1.2.L fast comparator missing
no WAVE data

Unable to start Rly16 server - see attachment 1

Added 16.10 6 July 2023

CU No /dev/ttyUSB* on Raspberry Pi

Re-seated USB cable at Raspberry Pi and USB-controlled ac mains relay, power cycled Raspberry Pi - return to normal operation.

I have taken videos with an Infrared camera of the power being supplied to one isolated ASIC on a mezzanine.

The power supply is a bench supply with current limit set to 3A.

The centre of the ASIC glowed white hot for a short time and then the whole ASIC shows as hot. Ths the short is on the ASIC and not the bond wires IMO.

I am unable to globally publish the videos at present as I only have a private google drive account.

Please contact Tom Davinson for further details.

Carried out some further work on failed mezzanine modules.

Inspected them externally and removed the copper block, internally with a bench microscope.

Found two obvious faults ..... broken components with scrambled pcb tracks.

To help determine problems with loading control registers I've added a new menu item in the ASIC control window to allow all four ASIC return values to be checked. This is only useful at the mezzanine test system.

Tested 7 that were labelled as faulty. Failed all of them. 2 with broken components and 1 with some broken bond wires. 

Tested one fresh from the cupboard. It failed with over current on the +5v psu ( > 4A! ).

I propose to create a method of testing these mezzanines which allows better access to the power supply regulators ( LT3080 ) and the associated control voltage.

Attachments 2 & 7 AIDA FEE64 mezzanine with
                  1) adaptor PCB connected to ERNI input connector
                  2) test PCB to provide power & control to FEE64 mezzanine
                      plus probe points for (per ASIC) Data Ready, A0-A3, MUX output, 16x fast comparator, 16x buffered preamp output etc.

Attachments 1, 3 & 4 AIDA FEE64 power (middle & right) and fan power (left)

N.B.

Attachment 1 - mid-upper TTi QL355T FEE64 PSU shows nominal current load ( 5V/1.672A 7V/0.031A ) for configured ASICs

Attachment 5 - AIDA FEE64 mezzanines in T9 AIDA cupboard
                 left - 2x boxes with U/S FEE64 mezzanines (labelled)
                right - 2x boxes with bench test OK FEE64 mezzanines 
               bottom - untested FEE64 mezzanines

Attachment 6 - AIDA FEE64 mezzanines to be re-tested


Summary of AIDA FEE64 mezzanine bench tests (see Mezzanine logbooks for details)

Garner Osborn Batch 7226-1

9  pass
11 pass
15 fail no signals?
16 fail power?
17 fail power?
19 pass
23 pass
24 fail asic#4
27 fail power?
30 fail power?
37 pass
39 pass
40 fail power?

Batch 0213110101

26 fail asic#2
27 fail asic#3
29 pass

Batch 0216240101

8 pass

It is possible that the mezzanines have dirty electrical contacts - they should be cleaned and re-tested

we are noticing we appear to see less implant events in detector 3 than we expect. This was first noticed in the xy spectra of the DSSD in the Go4 online.
As part of testing we have lowered the threshold in aida09 which from the xy appeared to have less events.

Following this we still seemed to see less events.

OH downloaded a selection of recent files to analyse. Looking at the total number of HEC events it appears that aida09, aida10 and aida12 are all seeing less HEC events than I would expect.
The ratio of HEC events in aida09 to aida11 was 0.36.

Looking at the energies of the HEC events there appeared to be less events everywhere and not just a threshold issue. We thought it could then be radiation damage and poor
charge collection. To test this we raised the bias to 120V on DSSD3.

The same test was again performed and the ratio again came out to be 0.36
We did not appear to recover any HEC events

Comparing the scaled energy distributions of aida09 and aida11 we see no evidence of a different energy response other than an increase in lower energy events in aida09 due to the lower threshold

I now think it may be a hardware issue. Will look at the last file before the most recent powercycle.

Using TD's analyser program can confirm the rate between aida09 and aida11 before 08:30 this morning was ~1:1.
The problem seems to have appeared during the power cycles following this.

Database file - 2019Dec19-16.19.51
Current threshold at 0x64


13:27 Recovered from power cycle
      System wide checks all ok - Attachments 1-6
      *NB* Synchronise the ASIC clocks doesn't work - Attachment 7
      ASIC Control ok
      FEE temperatures ok - Attachment 8

      Bias and leakage currents ok - Attachment 9
      New taper service menu - Attachment 10

      Pulser peaks log plot - Attachments 11-12
      1.8.L pulser peaks - Attachment 13-14
      Waveform plots - Attachment 15-16



      FEE7 we aren't seeing a HIT pattern but we are seeing ADC data items -> It was a corrupted options file

15:20 DAQ Crashed after enabling data transfer
      Problem was not configuring the tapeserver correctly
      Have recovered from this. There are now no histograms for FEE09
      This is because the options file has been corrupted during startup.
      From the statistics it appear we are still reading data on the FEE
      Chosen to let the DAQ run in this state to test stability for the time being

To make room for the installation of an MR-TOF device at F11, AIDA and DTAS have been removed 
from their in-beam position at F11.

The AIDA network and DTAS/BRIKEN optic fibre cables have been coiled and tied to the E17 stairwell
barrier.

AIDA network cables in B2F disconnected, looped and cable tied to hand rail, out of the way.

Labelled AIDA1/AIDA2 according to which network switch they belong to.

09.08 all system wide checks okay *except* naida7 fails adc calibration
      mismatch between sync pulses received from master and FEE64 - attachment 1

      FEE64 temperatures ok - attachment 2

      detector bias/leakage currents ok - attachment 3
      leakage currents slightly ramping since last night

      RH 50.7%, Temperature 22.2 deg, dew point 11.6 deg

09.30 AIDA powered off and now in safe state

stop the daq

pause merger

stop TapeServer

housekeeping checks

bias off

individually turn power relays off

switch off 2x NIN bins, 1x fan tray

do not turn off clock!!

turn off aida circuits at power box (careful!)

turn chiller off - press and hold arrow button

front panel switch on chiller - off

wall 3 phase power - off

withdraw aida clear from DTAS - slowly!

return power tool, temperature probe and water container to corral

*if cables*

network cables - blue, disconnect at switch, reel up at stairwell

disconnect clock

aida plastic high voltage and signal

cables from root macb trigger and reset to DTAS

mains cables from mains box

then move aida!

https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=1560332343

10.37 Post - beam, AIDA & DTAS run only
      DTAS stop run 164
      AIDA file R2_1012

10.54 DTAS start run 165
      AIDA file R2_1015
      DTAS begins calibration with 24Na source

11.06 DAQ continues running OK
      All system wide checks ok *except* nnaida7 fails ADC calibration
      FEE64 temperature OK - see attach 1
      Good events rate OK - see attach 2
      Leakage currents OK - see attach 3
      Merger & Tape server OK - see 4 & 5

11.47 DTAS stop run 166
      AIDA file R2_1022

12.03 DTAS start run 167
      AIDA file R2_1025
      Caesium measurement

13.18 DTAS stop run 169
      AIDA file R2_1035

14.59 DTAS opens file run 172
      AIDA file R2_1049
      

14.57 DAQ continues OK file RIBF147/R2_352

      postrun background and gamma source tests

      ASIC settings 2019Jun13-08.56.35
      DSSSD#1 slow comparator 0x1d
      DSSSD#2 slow comparator 0x8

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 6 & 7

      FEE64 temperatures OK - see attachment 8

      good event statistics - OK - see attachment 9
      11x <20k 22x < 50k 23x <100k
      Merger - 1x Q 21 error  see attachment 10
      TapeServer OK - see attachment 11

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 12
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 13
      1.8.L spectra - see attachments 14 & 15
      nnaida1 78 ch FWHM, nnaida3 81 ch FWHM
      1.8.H spectra - see attachments 16 & 17

      FEE64 Rate spectra - attachment 18
      Check ASIC Control x1

11.04 analysis of file RIBF147/R2_1051 - attachment 19
      deadtime <<1% all FEE64s *except* nnaida19 ~2%
      no timewarps

16.00 AIDA file R2_1058
      DTAS sends sync pulse
      DTAS having issues with DAQ speed

16.30 DTAS stop 175
      AIDA file R2_1062

16.32 pulser walkthrough start

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 250Hz range, variable min. c. 25Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse
      
      90000 - 10000 in 10000 steps walkthrough file R3 - see attachments 20 & 21

      12000 - 2000 in 2000 steps walkthrough file R5 - see attachments 22 & 24

      ignore file R4

17.08 pulser walkthrough end

22.57 DAQ stop
      AIDA file TapeData/RIBF147/R6_49
      DTASD stop on run 191

16.10 DAQ continues as before.
      Merger rate ~700k items/s and ~5.3Kb/s
      Individual FEE rates remain roughly constant
      Temps and bias ok.

17.33 DTAS run 149 stopped

      DTAS run 150 started
      BigRIPS run 2057 
      AIDA run ~1.3GB in R2_865

19.30 DTAS run 152 stopped

      DTAS run 153 started
      BigRIPS run 2058
      AIDA run ~1.8GB in R2_884

      Temps and bias ok.
      Rates in merger, tape server and individual FEEs as before.
      
19.50 In looking at previous data, AIDA is seeing ~30% fewer implants that what is observed at F11Plastic
      Beam spot is not central on AIDA and some ions will be lost over sides of DSSD, but does not look
      like it would account for a ~30% reduction
      AIDA implant profile shown in Attachment 1 - from file
merged_a2_687_708_br190618_2315_100Sn118_121bgrun2049_sw_Tsi.root

21.01 Beam stopped.
      DTAS run 155 stopped.
      AIDA file R2_899.

      DTAS and AIDA will continue with background measurements.

21.04 DTAS run 156 started
      AIDA run R2_899
      
      Chiller is full.
      Lead bricks upstream of moderator.

      That's all folks.

08:00 Shift change
      No change in settings

      DAQ continues running OK
      Good events rate OK - see attach 1
      FEE64 temperature OK - see attach 2
      Merger & Tape server OK - see 3 & 4
      Leakage currents OK - see attach 5
      
      Online HEC xy plot OK, most implants in DSSD2 - see attach 6
      Zeroed online histograms

09:29 DTAS DAQ stops on run 135
      AIDA on run R2_787

09:32 DTAS DAQ restarts on run 136
      AIDA on run R2_787
      BigRIPS on run 2053

09:33 DAQ continues OK
      Good events rate OK - see attach 7
      Merger ~ 700k items/s
      Tape ~ 5400 Kbytes/s
      Leakage currents OK - see attach 8

      Online HEC xy plot OK - see attach 9

10:31 Good event rate in nnaida 19, 24 steadily creeping up. See attach 10.
      Currently 160k and 120k
      Merger ~ 710 k items/s
      Tape ~ 5689 kbytes/s
      All system-wide checks OK, except nnaida7 fails ADC calibration as usual

11:20 Good event rate stable - see attach 11
      FEE64 temperatures OK - see attach 12
      Merger ~700k items/s
      Tape server ~ 5500 Kbytes/s
      Leakage currents OK - see attach 13 & 14

11:30  DTAS stops DAQ on run 139
       BigRIPS on run 2053
       AIDA on run R2_806
       
11:32  DTAS restarts on run 140
       BigRIPS 2053
       AIDA R2_807

13:14  DAQ continues OK
       Good statistics events stable - see attach 15
       Merger ~ 730k items/s
       Tape server ~ 5500 KBytes/s
       Leakage current OK - see attach 16

13:34  DTAS stops DAQ on AIDA R2_826

13:37  DTAS restarts DAQ on run 144
       BigRIPS run 2055
       AIDA run 827

15:10  DTAS DAQ reports 20% drop in F11 counting rate
       AIDA plastic unchanged, beam current unchanged. Focusing issue?

       Reset online histograms to check we are still implanting. We are.

       Acquisition continues uninterrupted.

15:17  Good statistics OK - see attach 17
       FEE64 temperature OK - see attach 18
       Merger ~ 700k items/s
       TapeServer ~ 5500 Kbytes/s
       Detector leakage current OK - see attach 19

15:30  DTAS stops DAQ on AIDA run R2_845

15:33  DTAS restarts DAQ on run 147
       BigRIPS run 2056
       AIDA run R2_846 
       

00.00 Shift Change

      DAQ continues ok 

      AIDA file RIBF147/R2_697
      DTAS run 118
      BigRips run 2048

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      0.3mm Al degrader

00.15 System wide checks all ok *except* naida7 fails ADC calibration

00.19 FEE64 temperatures ok - attachment 1

      good event statistics ok - attachment 2

      detector bias/leakage currents ok - attachment 3

      tape service ok - attachment 4

      merger ok - attachment 5

01.19 DTAS stop/start (verified with DTAS2019 ELOG)

      DTAS Stop: 01:19
      DTAS run: 121
      AIDA run: 708
      BigRIPS run: 2049

      DTAS Start: 01:19
      DTAS run: 122
      AIDA run: 708
      BigRIPS run: 2049

01.46 Primary beam at 120 pnA; implants around 250 cps at F11

01.48 High Energy Spectra (1.8.H) for front and back strips, respectively (attachments 6 & 7)

02.35 HEC XY hit pattern - implants mostly in DSSD2 - attachment 8
      HEC multiplicity n vs p - attachment 9
      HEC Ey vs Ex - attachment 10
      Implant - decay time vs Energy - attachment 11

02.46 zeroed all histograms, online sort stats zeroed

02.49 HEC XY hit pattern - ~3 minutes after zeroing - attachment 12

02.52 Primary beam at 120 pnA; implants around 250 cps at F11

03.20 analyser output file R2_726 - attachment 13
      no timewarps
      ~1s deadtime on nnaida19
      ~0.8s deadtime on nnaida24
      0s for rest

03.23 DTAS stop run 125
      AIDA file R2_728
      BigRIPS run 2049

      DTAS start run 126
      AIDA file R2_728
      BigRIPS run 2050

03.28 Check ASIC control

04.16 HEC XY hit pattern - less implants than expected - attachment 14

      HEC XY hit pattern - change refresh rate to 10s.... looks ok. Sorry Tom! - attachment 15

04.26 FEE64 temperatures ok - attachment 16

04.28 System wide checks all ok *except* naida7 fails ADC calibration

      good event statistics ok - attachment 17

      detector bias/leakage currents ok - attachment 18

      merger & TapeServer ok - attachments 19 & 20

05.32 Primary beam at 120 pnA; implants around 250 cps at F11

05.36 DTAS stop run 129
      AIDA file R2_749
      BigRIPS run 2050

05.40 DTAS send sync pulse AIDA file R2_750

05.43 DTAS start run 130
      AIDA file R2_751
      BigRIPS run 2051

06.31 HEC XY hit pattern - implants mostly in DSSD2 - attachment 21
      HEC multiplicity n vs p - attachment 22
      HEC Ey vs Ex - attachment 23
      Implant - decay time vs Energy - attachment 24

06.34 High Energy Spectra (1.8.H) for front and back strips, respectively (attachments 25 & 26)

06.36 3.20 analyser output file R2_731 - attachment 27
      no timewarps
      ~1.7s deadtime on nnaida19
      ~0.8s deadtime on nnaida24
      0s for rest

07.19 System wide checks all ok *except* naida7 fails ADC calibration

      good event statistics ok - attachment 28

      FEE64 temperatures ok - attachment 29

      detector bias/leakage currents ok - attachment 30

07.21 Merger & TapeServer ok - attachments 31 & 32

07.30 DTAS stop run 132
      AIDA file R2_768
      BigRIPS run 2051

      DTAS start run 133
      AIDA file R2_768
      BigRIPS run 2052



 









      

      

     


     

      

 

Shift change

16:00 
      115 pnA primary, 290 cps implants at F11
      Presently at AIDA R2_616
      DAQ is running smoothly - passes all system checks (except ADC calib of nnaida7)
      Stats okay, though nnaida19 and 24 running a bit high (seems consistent w/ previous shift) - attach 1
           (Consistent with lower thresholds, pasted below)

      100Sn setting, 0.3mm Al degrader

      ASIC settings 2019Jun13-08.56.35
      DSSSD#1 slow comparator 0xa -> 0x1d
      DSSSD#2 slow comparator 0xa -> 0x8
      DSSSD#3 slow comparator 0x8 -> 0xa

      Biases fine - attach 2
      Merger okay - attach 3
      TapeServer okay - attach 4

16:13 New DTAS run 105
      AIDA R2_618
      BigRIPS is still 2044 as at 15:03

      Temperatures okay - attach 5

16:20 Implant spectra look good, mainly into DSSSD2 - attach 6

      Spectra saved in ~spectra/specs-2019Jun18-16.24.33

16:30 Zero stats, histograms

17:03 Old runs ending
      AIDA R2_626
      In principle DTAS 106 but it switches quickly to 107
      BigRIPS 2045

17:10 New run DTAS 108, AIDA R2_627

18:09 New implant profile - attach 6
      New stats - attach 7
      Looks okay

19:08 AIDA R2_647, DTAS 110

19:14 AIDA R2_648, DTAS 111, BigRIPS 2046

20:08 XY implants - attach 8
      Bias - attach 9
      Merger - attach 10
      TapeServer - attach 11
      Stats - attach 12

21:15 New runs: BigRIPS 2047, DTAS 115, AIDA R2_668

22:37 XY - attached 13; stats - attached 14
      Primary beam at 120 pnA; implants around 250 cps at F11

23:14 DTAS closes the run

23:20 New runs: AIDA R2_688, DTAS 118, BigRIPS 2048

00:00 New day. The DAQ continues OK

      Beam setting 2 for enhanced yield of Sn100
      No degrader

      Statistics OK - see attach 1
      FEE64 temps OK - see attach 2
      Merger & Tape server OK - see attach 3 & 4
      Bias OK - see attach 5
      All system-wide checks OK, except nnaida7 fails ADC calibration

00:19 AIDA R2_473
      DTAS  82
      BigRIPS 2036

01:50 FEE temps and bias/leakage currents OK
      Data rate continues at ~620k items/s and ~5.1MB/s
      ASIC check performed successfully
      
02:29 DTAS run 85
      BigRIPS run 2037
      AIDA ~1.5GB into R2_492

02:30 DTAS reset correlation scaler at start of R2_493
      Confirmed by change in value in Correlation status & control @ aidas1 window.

02:36 DTAS run 86 started
      BigRIPS run 2038
      AIDA file R2_494

04:38 DTAS run 88 stopped. AIDA run R2_512.
      DTAS run 89 started.
      BigRIPS run 2039
      AIDA run R2_512 (1.8GB)

      Temps + bias/leakage currents still ok
      Data rate still ~600k items/s and ~5MB/s
      Individual Good data rates remain roughly constant (see attachment 6)
      All system-wide checks passed, except nnaida7 fails ADC calibration

05:48 Stats and histograms zeroed

06:28 DTAS run 91 stopped. AIDA run R2_528 at the time.

      DTAS run 92 started
      BigRIPS run 2040
      AIDA run R2_528

07:50 Made some basic observations with the first file merged after the setting change
      Attachment 7 shows implant x:y plots for each DSSD
      Attachment 8 show PID for second setting with 100Sn highlighted in red and 96Ag in magenta

08:21 PID per DSSD Attachment 9
      Sn100 per DSSD attachment 10
      Sn100 Velocity against DSSD 11
      Sn100 Velocity against DSSD Energy attachment 12

08:29 DTAS and BigRIPS stop
      AIDA on file R2_546

      DTAS starts file 95
      BigRIPS run 2041
      AIDA on file R2_547

08:53 Stats ok - attachment 13
      Temps ok - attachment 14
      System wide checks ok
      ASIC check ok
      Bias and leakage still ok though DSSD3 continues to rise - attachment 15
      Merger continues with data rate around 700k - attachment 16

09:43 With the new implantation profile depositing most of the Sn100 in DSSD2 but some in the 3rd the
      plan is to put in place a 200 micron degrader to bring the deposition into the centre of detector
      2

10:15 Overnight MIDAS analysis has been completed.
      Spectra have been exported to: /homes/npg/spectra/specs-2019Jun18-10.14.36
      MIDAS will be switched to online mode with the change in degrader setting

10.33 DAQ stop
      AIDA file RIBF147/R2_566

      OH/AA/SN add 0.3mm Al degrader to Pb wall immediately upstream of the (CH2)n shield

10.35 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 50% M-H markers
      Temperature +24.1 deg C dew point +9.7 deg C RH 39.8%

10.39 DTAS starts file 98
      BigRIPS run 2042
      AIDA on file R2_567

11:06 Implantation events for the 2nd setting with 0,3mm Al plate - attachments 17-19

      FEE64 Rate spectra - attachment 20
      FEE64 HitRate spectra - attachment 21

      1.8.L spectra - see attachments 22-25
      nnaida1 73 ch FWHM, nnaida3 77 ch FWHM - cf. 73 & 78 ch FWHM respectively 10.41 yesterday
      1.8.H spectra - see attcahments 26-27
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 28
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 29

11.30 Check ASIC Control *all* FEE64s & ASICs

      zero *all* histograms
      zero DAQ stats

11.50 analysis of RIBF147/R2_576 
      deadtime *all* FEE64s <<1%
      no timewarps

11.57 ADC data synchronised - attachment 30
      per FEE64 ADC data / 20.48us - attachment 31

12:39 DTAS and BigRIPS stop runs
      AIDA on file R2_585

      DTAS file 101
      BigRIPS run 2043
      AIDA on File R2_585

13:23 System wide checks ok

14:38 DTAS and BigRIPS stop runs
      AIDA on file R2_683

      OH offline analysis of BigRIPS-implant correlations for previous 2h indicates >90% of 100Sn are
      now in DSSSD#2 with small d=fraction remaining in DSSSD#3 

      100Sn setting, 0.3mm Al degrader

      ASIC settings 2019Jun13-08.56.35
      DSSSD#1 slow comparator 0xa -> 0x1d
      DSSSD#2 slow comparator 0xa -> 0x8
      DSSSD#3 slow comparator 0x8 -> 0xa

      DAQ stats before & after chn age of slow comparator thresholds above - see attachments 33 & 34
      before 11x <20k 21x <50k 24x <100k cf after 11x <20k 22x <50k 23x <100k
      merger 664k items/s cf 560k data items/s

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

15.03 DAQ start
      AIDA file R2_606
      DTAS file 104
      BigRIPS run 2044

      

16:04  DAQ continues running OK
       All system-wide checks OK except nnaida7 ADC calibration fails
       FEE64 temperatures OK - attach 1
       Merger and Tape Server OK - see attach 2 & 3

16:30 DTAS and BigRIPS stop
      AIDA on file R2_406

16:35 Beam stop.
      AIDA plastic gain increased by a factor 2
      Moved the lead bricks between AIDA and F11, 1 cm further away to the sides

      Chiller water level OK
      Humidity  34.6%
      Temperature 23.4 C
      Dew point 7.1 C
      

16:40 Beam restart
      AIDA run R2_408
      DTAS 70 (from DTAS ELOG)
      BigRIPS 2030  (from DTAS ELOG)

      No obvious changes to the implantation pattern. May need more stats.   

      Detector leakage current OK - see attach 4    

17.31 nnaida14 3.*.H & 4.*.H spectra - attachments 5 & 6

      Corresponds to RHS DSSSD#3 - decrease in rate observed but no evidence of systematic variation of HEC energy 

      Modified implantdecay4.f to select events with x & y energy > ADC ch 1600 (c. 1MeV) to observe x-y hit pattern
      of light particles - see attachments 7 & 8
      Low stats but light particle distribution appears to be symmetric with no obvious RHS cut


17:37 DTAS & BigRIPS DAQ stop
      Beam stop
      Lead moved back as before
      AIDA plastic gain decreased by a factor 5

17:40 DTAS and BigRIPS stop
      AIDA on file R2_416


17.48 zero *all* SortSas spectra

17:50 Beam restarting
      AIDA R2_418
      DTAS  73  (72 is a mistake - ignore)
      BigRIPS  2031


18:43 DAQ continues OK
      All system wide checks OK - except nnaida7 fails ADC calibration as usual
      FEE64 temperature OK - see attach 9
      Stats OK - see attach 10
      Merger & Tape Server OK - see attach 11 & 12
      Leakage currents OK - see attach 13
      HEC & LEC events plots attached - attach 14 & 15 - note LEC in DSSD#3 are > 3 MeV only (light particle-like)

18:50 AIDA R2_427
      DTAS 74
      BigRIPS 2031

19.08 DTAS & BigRIPS DAQ stop - beam lost
      AIDA file R2_429

21:15 Beam is back - briefly
      AIDA R2_446

21:17 Beam lost - operators advise "this will take a long time"

22:16 Beam is back!
      AIDA R2_454
      DTAS 78
      BigRIPS 2034

      Statistics OK - attach 15
      FEE64 temperatures OK - attach 16
      Merger & Tape Server OK - see attach 17 & 18
      System-wide checks as usual

      DTAS reports rate in F11 down by 20%, and rate in AIDA plastic sees similar drop.

PID plot produced from 2 hours of merged data - attachment 1

Z on y-axis, A/Q on x-axis

numbers estimated by gating on each isotope and integrating

94Ag - 10584 events in 2hrs

97In - 42 events in 2 hrs

100Sn - 56 events in 2 hrs

94Pd - 383030 events in 2 hrs

10.41 DAQ continues OK file RIBF147/R2_352

      100Sn setting, no degrader

      ASIC settings 2019Jun13-08.56.35
      DSSSD#1 slow comparator 0xa -> 0x1d
      DSSSD#3 slow comparator 0xa -> 0x8

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics - OK - see attachment 4
      11x <20k 21x < 50k 24x <100k
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 73 ch FWHM, nnaida3 78 ch FWHM

      FEE64 Rate spectra - attachment 11
      Note high rate issues observed for *some* strips in nnaida14 ASIC #3 & #4 fixed (temporarily) by Check
ASIC Control
      FEE64 Rate spectra - attachment 12

10.58 ADC data synchronised - attachment 13

      Online MIDASsort spectra - attachments 14-18

11.04 analysis of file RIBF147/R2_353 - attachment 19
      deadtime <<1% *all* FEE64s
      no timewarps

11.12 HitRate spectra - attachment 20
      disable nnaida14 *hot* channels 29, 30 & 35 

11.15 zero all histograms
      zero DAQ stats

12.31 DTAS and BigRIPS stop
      AIDA on file R2_368

      DTAS starts file 63
      BigRIPS run 2025
      AIDA file R2_368

13:08 R2_374
      The putty window for USB2 had frozen with a 1 in the voltage set as shown in attachment 1
      The window was no longer updating.
      When regaining the window the voltage limit was applied and the detector
      began to ramp down
      The set voltage was reset to 100V and bias was regained.
      Total time with less than 100V was around 30sec

14:28 DTAS and BigRIPS stop
      AIDA on run R2_386

      DTAS Starts file 66
      BigRIPS run 2026
      AIDA on file R2_387

14:32 Bias and leakage currents ok - attachment 21

15:07 Rate spectra showing no spikes in DSSD 3
      System wide checks

15:08 DTAS and BigRIPS stop
      AIDA onfile R2_393
      BigRIPS chaning slit positions

14:14 DTAS starts file: 
      AIDA on file R2_394
      BigRIPS file 2027 (In control by bigRIPS)

15.30 TAS and BigRIPS stop
      AIDA onfile R2_396

It's a new day, it's a new log entry !!

01:25 DTAS run 46 started
      BigRIPS run 2019
      AIDA run R2_268

      DAQ running smoothly
      No change in Stat and Rate (stat zeroed at the beginning of this DTAS run)- See attachment 1
      Merger rate: 630k item/sec - See Attachment 2
      TapeServer rate still ~5 Mbytes/sec - See attachment 3
      
      Temperature and HV ok - See attachment 5 & 6

      System-wide checks OK except nnaida7 fails ADC calibration as usual.

      !!!
      Victor said that the run AIDA R2_249 is missing in the correlation merge data. This is the run when the
      correlation scaler was reset (as DTAS was running out of range in some of their timing histograms) (See
      elog end of Sunday)
      !!!

02:23 Rate in DSSD#3 card 9 and 12 slowly reaching 100kHz while 14 and 15 ~ 50kHz. See attachment 7
      TapeServer rate ~ 5.5 kHz
      

03:25 Change of DTAS run:
      DTAS run 49 started
      BigRIPS run 2020
      AIDA run R2_286

      Experiment still running smoothly. No significant change since last comments 2h ago.
      Leakage current in detector 3 is increasing slowly see attachment 8 & 9  

05:25 Change of DTAS run:
      Note: DTAS run stopped during AIDA R2_305 and re-started during R2_306.  

      DTAS run 52 started
      BigRIPS run 2021
      AIDA run R2_306

      Pretty quiet night shift.
      Stat & Rate in attachment 10 - DSSD#3 FEE card 9 back down to 60kHz
      Merger rate: 650k item/sec - See attachment 11
      TapeServer rate still ~5.1 Mbytes/sec - See attachment 12

      System-wide checks OK except nnaida7 fails ADC calibration as usual.
      
      X vs Y HEC spectrum in attachment 13
      LEC E vs HEC-LEC spectrum in attachment 14
      Both spectra zeroed

      Bias in attachment 15
      Temperature unchanged

07:30 DTAS and BigRIPS stop runs
      AIDA on file R2_323
      
07:33 New Run numbers
      DTAS Run: 55
      BigRIPS Run: 2022
      AIDA on File: R2_324

07:56 System wide checks ok
      Fee temps ok - attachment 16
      
      100Sn setting, no degrader

      ASIC settings 2019Jun13-08.56.35

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

08:28 Bias and leakage ok - attachment 17
      
08:48 ASIC check successful

09:32 DTAS and BigRIPS stop
      AIDA on file R2_342

      DTAS starts file 58
      BigRIPS run 2023
      AIDA still on file R2_342

Attachments 1, 3, 5 & 7 *.L spectra log scale

Attachments 2, 4, 6 & 8 *.L spectra linear scale (expanded around pulser peak) 

Attachments 9-12 *.W spectra 20us FSR 

Observe 

2.13.L low amplitude
2.14.L & 3.3.L large number of counts and 'sinusoidal' continuum

... but ... the corresponding waveform spectra look OK

Zero'd all histograms to confirm observations - confirmed - see attachment 16
Pulser peak width spectrum 3.8.L 71 ch FWHM

Analysis of RIBF148/R5_170_190, with 500 < E < 1000 keV energy cut

Note also a 600 keV energy difference cut was applied when sorting the data.

plots in order: Ex - Ey
                Ey vs Ex
                Ex-Ey vs xStrip
                Ex-Ey vs yStrip

DSSD 0 - attachments 1-4

DSSD 1 - attachments 5-8

DSSD 2 - attachments 9-12

DSSD 3 - attachments 13-16

DSSD 4 - attachments 17-20

DSSD 5 - attachments 21-24 (This DSSD has significantly more counts than the rest, so on different scale)

attachment 25 - table comparing peak centroids and sigma values
                calculated by applying gaussian fit to central peak in Ex-Ey plots

12.10 DAQ continues OK file RIBF147/R2_145

      100Sn setting, no degrader

      ASIC settings 2019Jun13-08.56.35

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      good event statistics - DSSSD#1 noisy - see attachment 3
      10x <20k, 19x <50k, 20x <100k

      p+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - DSSSD#1 noisy - attachments 4, 6, 7 & 8
      n+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 5

      FEE64 Rate spectra - attachment 1
      Check ASIC Control *all* FEE64s & ASICs x1
      FEE64 Rate spectra - attachment 2

      Observe that nnaida17 is the really noisy FEE64 - nnaida20, 22 & 23 show increased noise but
      not at same level as nnaida17. Is nnaida17 actually the problem? LH kapton PCB is the only
      one we did not replace for example.

12.21 DSSSD#1 stats OK

12.36 AIDA R2_151
      DTAS run 027
      BigRIPS still 2012

13:43 DAQ continues running OK file RIBF147/R2_167
      https://www.reddit.com/r/politics/
      Settings as before

      Good events stats OK - DSSD#1 no longer noisy - see attach 9
      Leakage current OK - see attach 10
      Systems wide checks OK except nnaida7 fails calibration

      Merger ~550k events/second, TapeServer 4435 Kbytes/s

      Will increase thresholds on DSSD#1 and decrease on DSSD#3 on next DTAS stop.

14:20 DSSD#1 was found noisy again (Rate>100kHz & Tapeserver 10Mbytes/s)) but then soon after was back to a
      normal counting rate (Rate back to ~40kHz & Tapeserver back to 5 Mbytes/s)

14:39 DTAS & BigRIPS stops - changing threshold during AIDA R2_174
      DSSD#1 (nnaida17, 20, 22, 23) slow comparator threshold -> 1d (300 keV)
      DSSD#3 (nnaida9, 12, 14, 15) slow comparator threshold -> 8 (80 keV)

      Check ASIC control x1 on all FEE64

      Restarting
      AIDA R2_175
      DTAS 30
      BigRIPS 2013

      New stats look OK - zero'd Counters - see attach  11
      nnaida 17,20,22,23 rates are down
      nnaida 9,12,14,15 rates are up
      It appears the data rate balances out. Data items & write to disk similar to before the changes. 
      See attach 12 & 13

      New sample waveforms in attach 14 & 15. nnaida17 looks significantly better than before.
      Rates spectra also attached - see 16
      
17:12 Data rate still ~600k items/s
      File rolled over to R2_196

17:30 Current F11 rate ~190 cps
      Estimation of implant rate in AIDA of ~270 implants/s (number of HEC events in DSSD1 y strips over duration
of file R2_197)
         > increased AIDA rate likely due to double counting of multi-strip events
      Temps all ok


18.11 DAQ stats zero'd
      *all* histograms zero'd

20:13 DAQ continues to run OK
      Data rate ~620k items/s. FEE64 data rates remain approx. same
      Temps OK
      Just rolled over to file R2_222

20:44 DTAS run 39 started
      BigRIPS run 2015
      AIDA at 1.2GB into R2_226

22:44 DTAS run 42 started
      BigRIPS run 2017
      AIDA at 1.3GB into R2_243

      Carried out ASIC check successfully
      Temps and data rate remain unchanged.

23:16 Been almost 1 day running. 
      DTAS running out of range in some of their timing histograms so reset the correlation scaler
      Reset successfully at start of R2_249

23:19 Reset signal sent again. Still in file R2_249

23:23 DTAS run 43 started
      BigRIPS run 2018
      AIDA run R2_250

23:54 MIDASSORT spectra saved to /homes/npg/spectra/specs-2019Jun16-23.52.55
      MIDASORT online started.

00.30 AIDA file R2_26
      DTAS run 007
      BigRIPS run 2006

00:55
      Merger status - attachment 1
      TapeSever status - attachment 2

01:40
      Before zeroing stats - attachment 3
      Histos up to now saved in /homes/npg/spectra/specs-2019Jun16-01.46.50
      Before zeroing histos - XY attachment 4

02:22  Up to AIDA R2_41
      Stats - attachment 5
      XY implants - attachment 6

02:29 AIDA R2_42 
      DTAS run 011
      BigRIPS still 2006

04:08 Up to AIDA R2_55
      Temps - attachment 7
      Biases - attachment 8
      Stats - attachment 9
      XY implants - attachment 10

04:50 Did some major UI updates to merger /data02/2019data/dtas/scripts/parallelscript/runall_xe19_dev.sh
         If no parameters are passed, it asks to select each option one-by-one, showing available options
             For DTAS, if there is only one run for a given header, it automatically selects it
         After that, it checks that all the raw files actually exist
         Finally, it composes the command, asks the user if it looks OK, and then launches the script (or quits)
         (For experts, it can still take the original case where all 7 parameters are passed at the command line)
         There may still be some minor bugs, so for now we don't replace the original one until Alvaro can check

06:09 Stats - attachment 11
      XY implant profiles -- attachment 12

06:30 DTAS 018; AIDA R2_80; BigRIPS 2009

Things getting a bit noisier?
      Merger - attachment 13
      TapeServer - attachment 14
      Stats - attachment 15

   The FEEs corresponding to DSSSD1 are all showing factors 2 to 10 higher than just 30 min. ago

   F11 rates still near 180 cps, primary beam still around 130 pnA.

06:43 Before I can diagnose the high noise problem in DSSSD1, it goes back to normal
      Merger - attachment 16
      TapeServer - attachment 17
      Stats - attachment 18
   Maybe the issue was from looking at the details too often :)

07:46 Shift change.

      DAQ continues running OK.
      Statistics show  noisy DSSD #1 (100-200kHz) - see attach 19
      Tapeserver also shows higher than normal write to disk rate - see attach 20
      After a few seconds write to disk rate goes back to normal - see attach 21
      Data items rate looks OK (500k). This was checked after the rates in DSSD#1 went back to normal - see attach 22
      FEE64 temperatures OK - see attach 23
      Implants look OK - see attach 24

      System-wide checks OK except nnaida7 fails ADC calibration as usual.

      Reset Statistics
      Stats now OK - see attach 25

      Reset HEC implants

      Timewarp events appear to be very frequent, consistently every 3-5 seconds.
      This seems to have been happening ever since beam was put on target.
      Analysed R2_94 using analyser in Desktop 3. No timewarps reported. See attach 26.
      
08:32 AIDA: R2_100,
      DTAS: 21  ,
      BigRips: 2010   

08:41 Another noise spike from DSSD#1
      Observed up to 1,600k data items per second - see attach 27
      Write to disk ~10 MB/s as before.
      See LEC xy plot - attach 28
      HEC xy plot shows no hints of issues - see attach 29
      
      Rate seems manageable - see attach 30 for analysis of noisy run R2_103. 
      Note few seconds deadtime in some FEE64 and unequal number of Pause/Resume in nnaida 22      

09:45 Rate in DSSD#1 back to normal. Data rate 500k, Write to disk 5 Mb/s.

10:00 Started compressing R2_* files to save disk space.
      Used nice gzip to compress to avoid conflicts with the DAQ.
      Status of compression can be checked in ELOG desktop in the terminal window running ls -alth

10:32 DTAS and BigRIPS stop runs
      AIDA on file R2_128

      DTAS:24
      BigRIPS 2011

10:56 Lost beam. BigRIPS and DTAS DAQs continue running. Accelerator operators advise beam should be back in 10 minutes.

11:12 Beam is back. BigRIPS & DTAS continue running and did not stop. AIDA file R2_133.

11:25 System-wide checks OK except nnaida7 fails ADC calibration as usual.
      Stats OK, but nnaida19 is a bit more noisy than befor (80k) - see attach 31
      Temperatures OK - see attach 32
      TapeServer & Merger OK - see attach 33, 34 - rates have been low since 10 am
      HEC xy plot OK - see attach 35

      Reset online spectra

      Leakage current OK - attach 36
     

09.05 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 75% M-H markers
      Temperature +24.1 deg C dew point +8.3 deg C RH 36.2%

      DAQ continues OK

      ASIC settings 2019Jun13-08.56.35

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics - OK - see attachment 4
      11x <20k 23x < 50k 24x <100k cf. 9x <20k 23x < 50k 24x <100k 22.39 yesterday
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 74 ch FWHM, nnaida3 78 ch FWHM - cf. 81 & 77 ch FWHM respectively 23.20 yesterday

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      Check ASIC Control x2
      FEE64 ASIC
      10    4
      16    4
      17    4
      FEE64 Rate spectra - attachment 12 - some channels recovered

09.19 ADC data synchronised - attachment 13

09.23 zero all histograms
      zero DAQ stats

16:45 DAQ Continues to run
      Rates on 17, 20, 22 amd 23 are up - attachment 14
      Bias and leakage current ok - attachment 15
      System wide checks ok
      ASIC check ok
      
16:58 Statistics back to normal level - attachment 16

17.34 DAQ stop
      replaced kapton pcb on FEE no. 22

      DAQ start -> writing to May19/R36

      system wide checks ok, *except* naida7 fails adc calibration

      good event statistics ok - attachment 17

      TapeService and Merger ok - writing at 4 Mb/s - attachments 18 & 19

17.41 zeroed all histograms

c. 19.30 First beam to AIDA + DTAS - see attachments 20-24

      *no* degraders

      Observe most ions stop in DSSSD#2 with a few stopping in DSSSD#3
              focus looks OK but distribution is to LHS as you look upstream to BigRIPS

19.50 Removed upstream PPAC and adjusted ZDS transverse settings to centre - attachments 25-29

      Now observe ions now stop mostly in DSSSD#3 but significant fractions still stop ion DSSSD#2
  
      DSSSD#3 appears well focussed and centred

20.19 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachment 30

      FEE64 temperatures OK - see attachment 31

      good event statistics - OK - see attachment 32

20.53 xy hit patters in all DSSDs

      ions mostly in DSSD3, some still depositing in DSSD2

21.06 attachment 33 - beam slightly focused to the left - xy hit pattern

      attachment 34 - beam further focused - xy hit pattern

21.14 DAQ stop

      DAQ start writing to /RIBF147/R1

      Sync pulse sent by DTAS on file R1_0

21.17 DAQ stop/start

      

      writing to file /RIBF147/R2

      sync pulse sent by DTAS - file R2_0

      ASIC settings 2019Jun13-08.56.35

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      no degrader

21.24 AIDA file on R2_1
      DTAS start 003
      BigRIPS run: 2003

21.31 histograms zeroed

      good event statistics ok - attachment 35

21.34 AIDA file on R2_2
      DTAS start 004
      BigRIPS run: 2004

22.02 good event statistics ok - attachment 36

22.16 AIDA file on R2_8
      DTAS run 004
      BigRIPS run 2004
      
      checked with DTAS
      
22.29 energy x vs y (HEC) - attachment 37 - grouping ~ 3MeV in all detectors
      xy hit pattern (HEC) - attachment 38
      implants centered on DSSD3

22.32 AIDA file R2_9
      DTAS run 005
      BigRIPS run 2005
      beam returns

22.34 HEC multiplicity - most events ~1,2,3 pixels - attachment 39

22.35 checked with DTAS
      AIDA file R2_10
      DTAS run 006
      BigRIPS run 2006

22.38 LEC energy x vs y - clear Ex=Ey locus - attachment 40
      xy hit pattern LEC - attachment 41
      xy multiplicity LEC - attachment 42 - most events 1,2 pixels

22.49 analyzer.f output for file R2_5 - attachment 44
      dead time 0.5% in fee19, zero in all others

22.56 problem with beam, beam stopped on AIDA file R2_8

23.05 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachment 45

      FEE64 temperatures OK - see attachment 46

      good event statistics - OK - see attachment 47

23.50 AIDA file R2_21
      DTAS run 006
      BigRIPS run 2006




      
      
      



      

 
      

Friday 14th June 

Authors: TD, DK, CB

08:40

  elog appears to be down.  Relevant screenshots are in /tmp/june14/ so please upload when we can access

  Julabo chiller 75% M-H markers
  Room Temp +24.5 C deg, dew point +8.1 deg C, Room humidity 35.2%

  Pulser, ASIC settings as yesterday (copy/paste)

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

  DAQ continues OK
  Statistics as before.  nnaida19 counter appears to have overflowed and wrapped around
    See stats.png
  
  System-wide checks OK, except nnaida7 fails ADC calibration as before

  Biases and leak currents reasonable -- see biases.png

  FEE64 temperatures okay, see fee-temps.png

  Merger looks okay, ~600k items / sec; see merger.png

  TapeServer as before, around 4.5 Mbytes/sec; see tapeserver.png


13:52

   Pulser, ASIC settings same as this morning

   DAQ continues OK
   Statistics as before. See attach 190614_1354_stats. Counts RESET.

   System-wide checks OK, except nnaida7 fails ADC calibration as before

   Bias and leak currents OK. See attach 190614_1356_bias

   FEE64 temperatures OK, see attach 190614_1357_temps

   Merger keeps running at ~560k items /s; see 190614_1359_merger
   TapeServer as before. See 190614_tape

17:24 AIDA DAQ crashed by DTAS touching the clock function generator
      Function generator set at 50MHz square high +5V low 0V

18:38 problem loading ASIC settings - mismatch in slow comparator threshold and shaping time
      performed save/restore with 2019Jun13-08.56.35 - all looks ok now
      
      System wide checks ok except nnaida7 fails adc calibration

      FEE64 temperatures ok - attachment 12

      good event statistics ok - attachment 13

      bias/leakage currents ok - attachment 14

     
18:38 for reals

      DAQ Stopped
      R30_0 opened writing to disk
      
      Was to test DTAS sync whilst writing to file
18:43 DAQ stopped on file R30_0

18:45 DAQ restarted on file R31 with no writing to disk

21:50 DAQ found crashed (Valencia group believe it crashed around 20:00)

      Trying to reset FEEs resulted in an error message attachment 15 and 16

      Each FEE was rebooted using telnet to avoid a power cycle
      System reset after reboot

      System wide checks ok
      Check ASIC control 

      FEE temps ok

      DAQ Started again
      On startup FEEs 17, 20, 22 and 23 were all about 150k
      All relate to DSSD0
      Pressed on kapton and noise went down.

      Statistics now good

22.45 Review /var/log/messages and observe nnaida15 rebooted at 19.27 - reason unknown
      This probably explains why DAQ stopped.

Jun 14 19:27:32 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f3:ac via p2p2
Jun 14 19:27:32 aidas1 dhcpd: DHCPOFFER on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Jun 14 19:27:32 aidas1 dhcpd: DHCPREQUEST for 10.1.2.15 (10.1.2.250) from 00:04:a3:2a:f3:ac via p2p2
Jun 14 19:27:32 aidas1 dhcpd: DHCPACK on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Jun 14 19:27:32 aidas1 rpc.mountd[2868]: authenticated mount request from 10.1.2.15:784 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 14 19:27:59 aidas1 rpc.mountd[2868]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)


22.53 ADC data synchronised - attachment 17

23.05 zero DAQ statistics
      zero all histograms
      

23.20 Check ASIC Control x1 
      FEE64 Rate spectra - attachment 18

      1.8.L spectra - see attachments 19 & 20
      nnaida1 81 ch FWHM, nnaida3 77 ch FWHM

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 21
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 22

23.36 DAQ start file May19/R34_0

      DTAS+AIDA correlation test using gamma ray sources

      Correlation scaler reset issued during R34_0

      ASIC settings 2019Jun13-08.56.35

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

23.53 DAQ stop file May19/R34_2

      nnaida15 did not stop - state unknown - reboot nnaida15

      This did not work - unable to reset nnaida15

      Closed all FireFox broweser tabs, stopped all servers and restarted

00.14 DAQ start

      ASIC settings 2019Jun13-08.56.35

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

Alpha data used: /May19/{R1,R2,R7,R8,R9,R11} (c. 380 hr.)

Absolute calibration calculated with relative calibrated data

Data then resorted with absolute and relative gains applied

Attachment 1 -> Ey vs Ex plot for all detectors, with slope Ey=Ex show in red. Some non-linearity present, but to first order looks good

Attachment 2 -> Alpha peaks pre- absolute calibration in DSSD0
                Ex in blue, Ey in red
                To determine absolute calibration coefficients, assigned leading edge of higher energy peak an energy of 7.4 MeV (Uranium decay series)
                Divide this by the observed channel number (in keV) to get the absolute gain coefficients in keV/ch for Ex and Ey in each detector.
                (Note, data already offset corrected, pulser walkthrough)
                Values typically ~0.72 keV/ch
                Multiply appropriately by relative gains obtained from gainMatch.cpp to get final gain coefficients.

Attachments 3 - 6 -> DSSD0 -> Ex - Ey
                           -> Ey vs Ex
                           -> Ex - Ey vs x strip
                           -> Ex - Ey vs y strip

Attachments 7 - 10 -> DSSD1 -> Ex - Ey
                            -> Ey vs Ex
                            -> Ex - Ey vs x strip
                            -> Ex - Ey vs y strip

Attachments 11 - 14 -> DSSD2 -> Ex - Ey
                             -> Ey vs Ex
                             -> Ex - Ey vs x strip
                             -> Ex - Ey vs y strip

Attachments 15 - 18 -> DSSD3 -> Ex - Ey
                             -> Ey vs Ex
                             -> Ex - Ey vs x strip
                             -> Ex - Ey vs y strip

Attachments 19 - 22 -> DSSD4 -> Ex - Ey
                             -> Ey vs Ex
                             -> Ex - Ey vs x strip
                             -> Ex - Ey vs y strip

Attachments 23 - 26 -> DSSD5 -> Ex - Ey
                             -> Ey vs Ex
                             -> Ex - Ey vs x strip
                             -> Ex - Ey vs y strip

Attachment 27 -> Table comparing sigma and peak centroids of Ex - Ey plots for each DSSD
                 Calculated using simple gaussian fit






                              

08.32 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 70% M-H markers + 0.5 jugful -> c. 80% M-H markers
      Temperature +24.0 deg C dew point +9.6 deg C RH 39.0%

      DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics - OK - see attachment 4
      8x <20k 23x < 50k 24x <100k cf. 7x <20k 23x < 50k 24x <100k yesterday evening
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 85 ch FWHM, nnaida3 86 ch FWHM - cf. 75 & 79 ch FWHM respectively 17.04 Tuesday 11 June 

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      Check ASIC Control x3
      FEE64 ASIC
      13    1
      14    4
      16    4
      19    3
      21    2
      FEE64 Rate spectra - attachment 12 - some channels recovered

08.45 ADC data synchronised - attachment 13

08.52 zero all histograms
      zero DAQ stats


08.56 ASIC settings saved to new DB key 2019Jun13-08.56.35
      includes slow comparator 0xa
      DAQ options updated

15:18 
      DAQ continues okay.  Rates seem ok, see attachment 14.
      Biases shown as attachment 15 -- looks fine.

      (These are all as before we assume)
      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      FEE64 temperatures OK - see attachment 16

      Merge ok, 570k items per second, see attachment 17
      TapeServer not storing but sitting around 4 MBytes/sec, see attachment 18

09:54 DAQ Continues ok with merger running at ~ 560k data items per second

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      System wide checks all ok - except nnaida7 fails adc calibration

      Bias and leakage currents ok - attachment 1

      FEE Temps ok - attachment 2

      Good event statistics good - attachment 3

      Merger and tape service good - attachment 4 and 5


16:33  DAQ continues OK with merger running at ~ 600k data items per second

     ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      All system-wide checks OK except nnaida7 fails ADC calibration

      Bias and leakage currents OK - attachment 6

      FEE temperatures OK - attach 7

      Good event statistics OK - attach 8
      check nnaida10 & nnaida20 counts vs. rate

      Merger and tape service OK - attachment 9 & 10

17.00 Average FEE64 rates since last DAQ stats zero @ 17.05 yesterday - data from attachment 11

      DSSSD#1   count      rate  
                           24h   most recent
      nnaida17 	1914894752 22.1k 23.2k
      nnaida20  3061905664 35.4k 35.6k
      nnaida22  1872820000 21.7k 21.8k
      nnaida23  2217883584 25.7k 24.8k  

      DSSSD#2

      nnaida18  1760374528 20.3k 21.1k
      nnaida19  1402771232 16.2k 66.6k => 32 bit overflow => 4.3E+09 + 1.4E+09 = 5.6E+09 => 65.9k
      nnaida21  2038432092 23.6k 23.5k
      nnaida24  2844103808 32.9k 31.3k

      Conclude rates have bee stable overnight - no evidence of noise transients for DSSSD#1 to 150-250k good
events/s

17.15 DAQ stats zero'd
      all spectra zero'd

09:46 DAQ continues ok

      all system wide checks OK *except* nnaida7 fails ADC calibration
      
      detector biases & leakage currents OK - see attachment 1

      FEE64 temperatures OK - see attachment 2

      good event statistics ok - attachment 3

10:00 Merger & TapeServer ok - attachments 4 & 5

15.13 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 6 & 7

      FEE64 temperatures OK - see attachment 8

      good event statistics - DSSSD#1 noisy - see attachments 9
      7x <20k 15x < 50k 20 < 100k cf. 8x <20k, 23x <50k, 24x <100k earlier today

      Check ASIC Control x2

      good event statistics - DSSSD#1 noisy - see attachments 10
      8x <20k 5x < 50k 20 < 100k cf. 8x <20k, 23x <50k, 24x <100k earlier today

      A, B. C & D Samtec connectors pressed into adaptor PCBs

15.41 good event statistics - OK - see attachments 11
      8x <20k 19x < 50k 20x < 100k

16.53 good event statistics - OK - see attachments 11
      8x <20k 19x < 50k 20x < 100k

17.04 p+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 14
      n+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 15
      1.8.L spectra - see attachments 12 & 13 
      nnaida1 75 ch FWHM, nnaida3 79 ch FWHM - cf. 76 & 83 ch FWHM respectively yesterday

17.05 all spectra zero'd
      DAQ stats zero'd

17.07 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 80% M-H markers 
      Temperature +23.4 deg C dew point +9.6 deg C RH 42.0%

17.10 leakage currents/detector bias ok - attachment 17

DSSSDs #1-6 slow comparator 0xa = 100keV - attachments 1-4

DSSSD2: attachments 5 to 8 (0xa to 0x8)

DSSSD3: attachments 9 to 12 (0xa to 0x8)

DSSSD4: attachments 13 to 16 (0xa to 0x8)

DSSSD5: attachments 17 to 20 (0xa to 0x8)

Global rates are >500 to <1000k items per second.  

Set all back to 0xa.

Now we try going to 60 keV (0x6)

DSSSD2: attachments 21 to 24 (0xa to 0x6) global ~1100k

DSSSD3: attachments 25 to 28 (0xa to 0x6) global ~1000k

DSSSD4: attachments 29 to 32 (0xa to 0x6) global ~1100k

Set all back to 0xa again.

09:45 DAQ continues ok 

      all system wide checks OK *except* nnaida7 fails ADC calibration
      
      detector biases & leakage currents OK - see attachment 1

      FEE64 temperatures OK - see attachment 2

      Good event statistics prior to reload - glitch with display? - attachment 3

      Reload done - good event statistics ok - attachment 4

10.00 Merger & TapeServer ok - attachments 5 & 6

15.14 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 7 & 8

      FEE64 temperatures OK - see attachment 9

      good event statistics - DSSSD#1 noisy - see attachments 10
      8x <20k, 23x <50k, 24x <100k cf. same as earlier today
      Merger OK - see attachment 11
      TapeServer OK - see attachment 12

      p+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 13
      n+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 14
      1.8.L spectra - see attachments 9 & 10
      nnaida1 73 ch FWHM, nnaida3 78 ch FWHM - cf. 76 & 83 ch FWHM respectively yesterday morning

      FEE64 Rate spectra - attachment 15
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 16

15.26 ADC data synchronised - attachment 17

16.55 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 80% M-H markers - topup to 100% with 0.5x jugful water
      Temperature +24.6 deg C dew point +8.1 deg C RH 34.5%

11.43 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics - DSSSD#1 noisy - see attachments 4
      10x <20k, 19x <50k, 20x <100k cf. 13x <20k 22x < 50k 24x <100k yesterday afternoon
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 76 ch FWHM, nnaida3 83 ch FWHM - cf. 104 & 111 ch FWHM respectively yesterday aftenoon

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 12

11.46 ADC data synchronised - attachment 13

      p+n FEE64s 1.8.W spectra 20us, 200us, 2ms & 20ms FSR - DSSSD#1 noisy - attachments 14-17

      Check ASIC Control *all* FEE64s & ASICs x2   - no change DSSSD#1 noise

      DSSSD#1 bias cycle - no change DSSSD#1 noise

      press Kapton Samtec into adaptor PCBs - reduces DSSSD#1 noise to previous levels

12.17 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers
      Temperature +25.3 deg C dew point +7.6 deg C RH 32.2%

12.23 temporary fix for DSSSD#1 noise? check by
      zero all histograms
      zero DAQ stats

      ...and wait

      good event statistics - DSSSD#1 noisy - see attachments 18
      11x <20k, 21x <50k, 23x <100k

13.30 DAQ stop

      OH replaces LH kapton PCB for DSSSD#1 n+n FEE64s 20 & 23 which we suspect may be damaged due to twist
      placed on kpaton cables by weight of all ribbon cables + cu foil shielding - particularly pronounced
      for nnaida20

      good event statistics - OK - see attachments 19
      7x <20k, 20x <50k, 24x <100k
      p+n FEE64s 1.8.W spectra 20us FSR - OK - attachment 20

      good event statistics - OK - see attachment 21
      7x <20k, 22x <50k, 24x <100k
      p+n FEE64s 1.8.W spectra 20us FSR - OK - attachment 22

17.50 detector biases & leakage currents OK - see attachments 23 & 24

      FEE64 temperatures OK - see attachment 25

      good event statistics - OK - see attachments 26
      9x <20k, 21x < 50k, 24x <100k cf. 10x <20k, 19x <50k, 20x <100k earlier today

      p+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 8

17.57 all histograms zero'd
      DAQ stats zero'd

14.14 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 70% M-H markers
      Temperature +25.3 deg C dew point +8.5 deg C RH 34.7%

      DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics OK - see attachments 4
      13x <20k 22x < 50k 24x <100k cf. 13x <20k 21x < 50k 24x <100k yesterday afternoon
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 104 ch FWHM, nnaida3 111 ch FWHM - cf. 80 & 87 ch FWHM respectively yesterday aftenoon

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 12 - some channels recovered

14.29 ADC data synchronised - attachment 13

14.31 zero all histograms
      zero DAQ stats

per FEE64 rate/20.48us & 'good event' DAQ statistics 

slow comparator threshold

100keV - attachments 1 & 2
110keV - attachments 3 & 4
120keV - attachments 5 & 6
150keV - attachments 7 & 8
200keV - attachments 9 & 10

14.05 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 70% M-H markers
      Temperature +25.6 deg C dew point +10.3 deg C RH 37.7%

13.30 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics OK - see attachments 4
      13x <20k 21x < 50k 24x <100k cf. same yesterday afternoon
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 80 ch FWHM, nnaida3 87 ch FWHM - cf. 96 & 103 ch FWHM respectively yesterday aftenoon

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 12 - some channels recovered

14.20 BNC PB-4 pulser
      Frequency changed from c. 4Hz to c. 2.5Hz (minimum)
      25Hz range, variable fully anti-clockwise

14.33 zero *all* spectra
      zero DAQ stats

      ADC data synchronised - attachment 13

16.50 DAQ start file May19/R18

      AIDA+DTAS merger test - 12kBq 60Co positioned on top of AIDA snout

      DAQ sync issued by DTAS during R18_0

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

17.28 DAQ stop file May19/R18_4

17.40 DAQ start file May19/R19

      AIDA+DTAS merger test - c. 30kBq? 137Cs positioned on top of AIDA snout

      DAQ sync issued by DTAS during R18_0

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

18.18 DAQ stop file May19/R19_5

19.36 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 14 & 15

      FEE64 temperatures OK - see attachment 16

      good event statistics OK - see attachments 17
      12x <20k 21x < 50k 24x <100k cf. 13x <20k 21x < 50k 24x <100k earlier this afternoon

19.45 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 70% M-H markers
      Temperature +25.1 deg C dew point +7.9 deg C RH 33.6%
      

16.40 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics OK - see attachments 4
      13x <20k 21x < 50k 24x <100k cf. same yesterday afternoon
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 96 ch FWHM, nnaida3 103 ch FWHM - cf. 88 & 92 ch FWHM respectively yesterday afternoon - now
observe high amplitude tailing on pulser peaks

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 12 - some channels recovered

16.59 zero *all* spectra
      zero DAQ stats

      ADC data synchronised - attachment 11

14.50 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics OK - see attachments 4
      13x <20k 21x < 50k 24x <100k cf. same yesterday afternoon
      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 88 ch FWHM, nnaida3 92 ch FWHM - cf. 75 & 82 ch FWHM respectively yesterday afternoon

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 12 - some channels recovered

15.09 zero *all* spectra
      zero DAQ stats

      ADC data synchronised - attachment 11

15.01 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 70% M-H markers - topup to 100% with 1x jugful water
      Temperature +25.8 deg C dew point +8.0 deg C RH 32.4%

      Access to F11 from 14.00 whilst F3 & F7 plastic scintillator and PPAC are replaced due to rad damage
during online experiment

      DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      good event statistics OK - see attachments 4
      13x <20k 21x < 50k 24x <100k cf. 15x <20k, 21x < 50k, 24x < 100k yesterday evening

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L spectra - see attachments 9 & 10
      nnaida1 75 ch FWHM, nnaida3 82 ch FWHM - cf. 95 & 99 ch FWHM respectively yesterday afternoon

      FEE64 Rate spectra - attachment 11
      Check ASIC Control *all* FEE64s & ASICs x2
      FEE64 Rate spectra - attachment 12 - some channels recovered

      ADC data synchronised - attachment 11

13.40 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4
      14x <20k, 21x <50k, 24x <100k - cf. 8x <20k, 15x <50k, 21x <100k yesterday evening

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      nnaida1 95 ch FWHM, nnaida3 99 ch FWHM - cf. 75 & 76 ch FWHM respectively yesterday afternoon
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us, 200us, 2ms & 20ms FSR - attachments 10-13

      Check ASIC Control *all* FEE64s & ASICs
      zero all spectra

14.11 MIDASsort running online (sampling TapeServer buffers, 5% say) overnight (last time spectra
      were zero'd) observed high energy heavy ions in DSSSD #1-3 - see attachments 14-17

      Currently high energy, heavy ion rate is zero.

19.58 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 18 & 19
      FEE64 temperatures OK - see attachment 20
      good event statistics OK - see attachments 21
      15x <20k, 21x < 50k, 24x < 100k - cf. 14x <20k, 21x <50k, 24x <100k at 13.40 today

      Merger OK - see attachment 22
      TapeServer OK - see attachment 23

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 24
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 25

12.00 DAQ continues file May19/R15_169

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4
      10x <20k, 19x <50k, 24x <100k - same as yesterday evening

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      nnaida13 1.*.L spectra - attachment 7 - some evidence of light ions (5 < E < 20MeV) but low rate
      FEE64 Rate spectra - attachment 8

      1.8.L spectra - see attachments 9 & 10
      nnaida1 75 ch FWHM, nnaida3 76 ch FWHM - cf. 77 & 82 ch FWHM respectively yesterday afternoon
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 11
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 12

      Check ASIC Control *all* FEE64s & ASICs

12.20 Offline analysis from R15_0 to R15_167 ADC & disc data synchronisedfor file R15_0 - attachments 13, 14 & 15

18.27 DAQ stop file May19/R15_245

      DAQ start - no storage

      DAQ stall - reboot all FEE64s *except* nnaida4, 7, 8, 14, 15 & 16 - N.B. no power cycle required

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 19 & 20
      FEE64 temperatures OK - see attachment 21
      good event statistics OK - see attachments 16
      8x <20k, 15x <50k, 21x <100k - cf. earlier today 10x <20k, 19x <50k, 24x <100k

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 17
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 18

16.08 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers - topup to 100% with 1x jugful water
      Temperature +25.7 deg C dew point +7.7 deg C RH 31.4%

      DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

14.14 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3

      Check ASIC Control *all* FEE64s & ASICs

      good event statistics OK - see attachments 4
      11x <20k, 19x <50k, 21x <100k - cf. 10x <20k 21x <50k 24x <100k yesterday

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      FEE64 Rate spectra - attachment 7
      Check ASIC Control
      FEE64 ASIC
      1     4
      10    1
      13    1
      14    1
      14    2
      22    3
      FEE64 Rate spectra - attachment 8 - some channels recovered

      1.8.L spectra - see attachments 9 & 10
      nnaida1 77 ch FWHM, nnaida3 82 ch FWHM - cf. 74 & 78 ch FWHM respectively yesterday
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 11
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 12
      FEE64 Rate spectra - attachment 9

      DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse 

17.03 ADC data synchronised - attachment 13

      2x Pb blocks placed lengthways in aperture of the upstream (CH2) shield removed

      c. 8cm (1x std width) Pb thick Pb wall immediately downstream of F11 remains in position

      check light ions when beam returns and online group changes target

18.16 AA reports F11 rate c. 2.5kHz
      AIDA plastic rate c. 2.4kHz

      online sort sampling small fraction of data so write to disk and analyse all offline

18.22 zero all spectra
      Check ASIC Settings *all* FEE64s & ASICs

      DAQ start file May19/R15

      light ion background?

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      good event statistics OK - see attachments 4
      11x <20k, 19x <50k, 24x <100k - cf. 11x <20k 19x <50k 21x <100k earlier

11.31 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4
      12x < 20k, 21x < 50k, 24x < 100k - cf. yesterday 10x < 20k, 21x < 50k

      1.8.L spectra - see attachments 5 & 6
      nnaida1 74 ch FWHM, nnaida3 78 ch FWHM - same as yesterday
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      no indication of light ions with beam to ZDS & F11

      FEE64 Rate spectra - attachment 9

      Check ASIC Control *all* FEE64s & ASICs
      zero all spectra

17.21 detector biases & leakage currents OK - see attachments 10 & 11

      FEE64 temperatures OK - see attachment 12
      good event statistics OK - see attachments 13
      11x < 20k, 19x < 50k, 21x < 100k - cf. 11.30 today 12x < 20k, 21x < 50k, 24x <100k
      increased rates observed for nnaida17, 20 & 23 - all DSSSD#1 - nnaida22 ~15k -> ~30k

      Check ASIC Control *all* FEE64s & ASICs
      zero all spectra

      cycled DSSSD#1 bias - no change
      
      nnaida2 - no good events
      unable to DAQ stop nnaida20 & nnaida23
      unable to DAQ reset nnaida20 & nnaida23
      obtain timeout errors from nnaida20 and DAQ error status for nnaida20 & nnaida23
      reboot nnaida20 & nnaida23
      DAQ reset
      DAQ setup

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64 -> 0xa

      Check ASIC Control *all* FEE64s & ASICs
      zero all spectra

      still observe increased rates for nnaida17, 20 & 23 - all DSSSD#1 - nnaida22 ~32k

18.05 DAQ statistics return to ~normal - attachment 14
      10x < 20k, 21x < 50k, 24x < 100k
              11.31 17.21 18.05
      nnaida17  13k  100k  43k
      nnaida20  59k  136k  70k
      nnaida22  16k   32k  26k
      nnaida23  46k  111k  53k

11.13 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4
      10x < 20k, 21x < 50k, 24x < 100k - cf. yesterday 11x < 20k, 21x <50k 

      1.8.L spectra - see attachments 5 & 6
      nnaida1 74 ch FWHM, nnaida3 78 ch FWHM - cf. yeserday nnaida1 73 -> 74 ch FWHM
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      1.8.L n+n spectra (log scale) no indication of light ions - attachment 9
      N.B. currently no ions through ZDS and no increase in background for DTAS
      This may/will change as online experiment starts to use ZDS from this evening

      Check ASIC Control *all* FEE64s & ASICs
      zero all spectra

      FEE64 Rate spectra - attachment 10

      Check ASIC Control
      FEE64 ASIC
      1     4
      8     1
      13    3
      14    1
      22    3

      FEE64 Rate spectra - attachment 11

14.08 detector biases & leakage currents OK - see attachments 12 & 13

16.01 DAQ start (to TapeServer, no storage)

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      ADC data synchronised - see attachment 14

17.15 detector biases & leakage currents OK - see attachments 15 & 16

Unable to monitor FEE64 logs using pi_monitor using instructions https://elog.ph.ed.ac.uk/AIDA/559

At first load of URL http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml I obtain error messages - attachment 1

At reload of URL I obtain the expected page and 
Update USB Terminal List and Connect USB Terminals operate as expected - attachment  2

Selecting Parse USB Log Files for Details produces (after c. 60s) a connection reset error from the browser -
see attachment 3


pi@npg-monitor /tmp $ ls
log8015_19.05.28  log8015_counter  log8015_error  tcl2156  tclhttpd2156.default
pi@npg-monitor /tmp $ cat log8015_error
 [28/May/2019:09:18:01] sock8 error writing "sock8": broken pipe  /css/buttons.css
 [28/May/2019:09:18:11] sock8 DocSubstSystemFile {could not read "/MIDAS/TclHttpd/Html/error.html": no such file
or directory} /AIDA/Pi_Monitor/Pi_Monitor.tml
 [28/May/2019:09:18:11] sock8 Error 500 /AIDA/Pi_Monitor/Pi_Monitor.tml {can't read "JS": no such variable
    while executing
"if {$JS != ""} {
       append JS "\");"
       set html "<script>[set JS]</script>"
    }"
    (in namespace eval "::Pi_Monitor" script line 2)
    invoked from within
"namespace eval Pi_Monitor {
    if {$JS != ""} {
       append JS "\");"
       set html "<script>[set JS]</script>"
    }
}"
    invoked from within
"subst \n[Doc_Dynamic\]\n\n[global\ env\;\ source\ [file\ join\ \$env(MIDASBASE)\ TclHttpd\ Html\
settings.tml\]\]\n\n<!\n[global\ Httpd\;\ upvar\ ..."
    ("uplevel" body line 1)
    invoked from within
"uplevel #0 [list subst $script]"
    (procedure "SubstFile" line 12)
    invoked from within
"SubstFile /MIDAS/TclHttpd/Html/AIDA/Pi_Monitor/Pi_Monitor.tml {}"
    ("uplevel" body line 1)
    invoked from within
"uplevel 1 [list SubstFile $path $interp]"
    (procedure "Subst_File" line 7)
    invoked from within
"Subst_File $template $interp"
    invoked from within
"TemplateInstantiate $sock $path {} $suffix {} $Template(templateInterp)"
    (procedure "Doc_application/x-tcl-template" line 9)
    invoked from within
"$cmd $path $suffix $sock"
    (procedure "Doc_Handle" line 20)
    invoked from within
"Doc_Handle $prefix $path $suffix $sock"
    (procedure "DocDomain" line 44)
    invoked from within
"DocDomain / /MIDAS/TclHttpd/Html sock8 AIDA/Pi_Monitor/Pi_Monitor.tml"
    ("eval" body line 1)
    invoked from within
"eval $Url(command,$prefix) [list $sock $suffix]"} /AIDA/Pi_Monitor/Pi_Monitor.tml
pi@npg-monitor /tmp $ cat log8015_19.05.28
10.1.1.250 - - [28/May/2019:09:18:01 UTC] "GET / HTTP/1.1" 200 - - "Mozilla/5.0 (X11; Linux x86_64; rv:60.0)
Gecko/20100101 Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:01 UTC] "GET /js/Common.js HTTP/1.1" 200 3828 "http://nnrpi2:8015/"
"Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:11 UTC] "GET /AIDA/Pi_Monitor/Pi_Monitor.tml HTTP/1.1" 500 - - "Mozilla/5.0
(X11; Linux x86_64; rv:60.0) Gecko/20100101 Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /AIDA/Pi_Monitor/Pi_Monitor.tml HTTP/1.1" 200 - - "Mozilla/5.0
(X11; Linux x86_64; rv:60.0) Gecko/20100101 Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /AIDA/Pi_Monitor/Pi_Monitor.js HTTP/1.1" 200 542
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /js/Common.js HTTP/1.1" 304 3828
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /images/Space.gif HTTP/1.1" 200 -
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /js/FormChek.js HTTP/1.1" 304 60521
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /images/midas.gif HTTP/1.1" 200 2558
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /images/Space.gif HTTP/1.1" 200 -
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:30 UTC] "GET /images/tclp.gif HTTP/1.1" 200 1294
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:32 UTC] "POST /AIDA/Pi_Monitor/Pi_Monitor.tml HTTP/1.1" 200 -
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:32 UTC] "GET /images/Space.gif HTTP/1.1" 200 -
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:39 UTC] "POST /AIDA/Pi_Monitor/Pi_Monitor.tml HTTP/1.1" 200 -
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
10.1.1.250 - - [28/May/2019:09:18:39 UTC] "GET /images/Space.gif HTTP/1.1" 200 -
"http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml" "Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Firefox/60.0"
pi@npg-monitor /tmp $ cat log8015_counter



set ::counter::H-urlhits(0) 0
set ::counter::H-urlhits(1) 0
set ::counter::H-urlhits(10) 0
set ::counter::H-urlhits(11) 0
set ::counter::H-urlhits(12) 0
set ::counter::H-urlhits(13) 0
set ::counter::H-urlhits(14) 0
set ::counter::H-urlhits(15) 0
set ::counter::H-urlhits(16) 0
set ::counter::H-urlhits(17) 0
set ::counter::H-urlhits(18) 0
set ::counter::H-urlhits(19) 0
set ::counter::H-urlhits(2) 0
set ::counter::H-urlhits(20) 0
set ::counter::H-urlhits(21) 0
set ::counter::H-urlhits(22) 0
set ::counter::H-urlhits(23) 0
set ::counter::H-urlhits(24) 0
set ::counter::H-urlhits(25) 0
set ::counter::H-urlhits(26) 0
set ::counter::H-urlhits(27) 0
set ::counter::H-urlhits(28) 0
set ::counter::H-urlhits(29) 0
set ::counter::H-urlhits(3) 0
set ::counter::H-urlhits(30) 0
set ::counter::H-urlhits(31) 0
set ::counter::H-urlhits(32) 0
set ::counter::H-urlhits(33) 0
set ::counter::H-urlhits(34) 0
set ::counter::H-urlhits(35) 0
set ::counter::H-urlhits(36) 0
set ::counter::H-urlhits(37) 0
set ::counter::H-urlhits(38) 0
set ::counter::H-urlhits(39) 0
set ::counter::H-urlhits(4) 0
set ::counter::H-urlhits(40) 0
set ::counter::H-urlhits(41) 0
set ::counter::H-urlhits(42) 0
set ::counter::H-urlhits(43) 0
set ::counter::H-urlhits(44) 0
set ::counter::H-urlhits(45) 0
set ::counter::H-urlhits(46) 0
set ::counter::H-urlhits(47) 0
set ::counter::H-urlhits(48) 0
set ::counter::H-urlhits(49) 0
set ::counter::H-urlhits(5) 0
set ::counter::H-urlhits(50) 0
set ::counter::H-urlhits(51) 0
set ::counter::H-urlhits(52) 0
set ::counter::H-urlhits(53) 0
set ::counter::H-urlhits(54) 0
set ::counter::H-urlhits(55) 0
set ::counter::H-urlhits(56) 0
set ::counter::H-urlhits(57) 0
set ::counter::H-urlhits(58) 0
set ::counter::H-urlhits(59) 0
set ::counter::H-urlhits(6) 0
set ::counter::H-urlhits(7) 0
set ::counter::H-urlhits(8) 0
set ::counter::H-urlhits(9) 0


set ::counter::Hour-urlhits(0) 0
set ::counter::Hour-urlhits(1) 0
set ::counter::Hour-urlhits(10) 0
set ::counter::Hour-urlhits(11) 0
set ::counter::Hour-urlhits(12) 0
set ::counter::Hour-urlhits(13) 0
set ::counter::Hour-urlhits(14) 0
set ::counter::Hour-urlhits(15) 0
set ::counter::Hour-urlhits(16) 0
set ::counter::Hour-urlhits(17) 0
set ::counter::Hour-urlhits(18) 0
set ::counter::Hour-urlhits(19) 0
set ::counter::Hour-urlhits(2) 0
set ::counter::Hour-urlhits(20) 0
set ::counter::Hour-urlhits(21) 0
set ::counter::Hour-urlhits(22) 0
set ::counter::Hour-urlhits(23) 0
set ::counter::Hour-urlhits(3) 0
set ::counter::Hour-urlhits(4) 0
set ::counter::Hour-urlhits(5) 0
set ::counter::Hour-urlhits(6) 0
set ::counter::Hour-urlhits(7) 0
set ::counter::Hour-urlhits(8) 0
set ::counter::Hour-urlhits(9) 0


set ::counter::Day-urlhits(0) 0

Before selecting Parse USB ...

pi@npg-monitor /tmp $ ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 09:16 ?        00:00:01 init [2]  
root         2     0  0 09:16 ?        00:00:00 [kthreadd]
root         3     2  0 09:16 ?        00:00:00 [ksoftirqd/0]
root         5     2  0 09:16 ?        00:00:00 [kworker/0:0H]
root         6     2  0 09:16 ?        00:00:00 [kworker/u8:0]
root         7     2  0 09:16 ?        00:00:00 [rcu_preempt]
root         8     2  0 09:16 ?        00:00:00 [rcu_sched]
root         9     2  0 09:16 ?        00:00:00 [rcu_bh]
root        10     2  0 09:16 ?        00:00:00 [migration/0]
root        11     2  0 09:16 ?        00:00:00 [migration/1]
root        12     2  0 09:16 ?        00:00:00 [ksoftirqd/1]
root        14     2  0 09:16 ?        00:00:00 [kworker/1:0H]
root        15     2  0 09:16 ?        00:00:00 [migration/2]
root        16     2  0 09:16 ?        00:00:00 [ksoftirqd/2]
root        17     2  0 09:16 ?        00:00:00 [kworker/2:0]
root        18     2  0 09:16 ?        00:00:00 [kworker/2:0H]
root        19     2  0 09:16 ?        00:00:00 [migration/3]
root        20     2  0 09:16 ?        00:00:00 [ksoftirqd/3]
root        21     2  0 09:16 ?        00:00:00 [kworker/3:0]
root        22     2  0 09:16 ?        00:00:00 [kworker/3:0H]
root        23     2  0 09:16 ?        00:00:00 [khelper]
root        24     2  0 09:16 ?        00:00:00 [kdevtmpfs]
root        25     2  0 09:16 ?        00:00:00 [netns]
root        26     2  0 09:16 ?        00:00:00 [perf]
root        27     2  0 09:16 ?        00:00:00 [khungtaskd]
root        28     2  0 09:16 ?        00:00:00 [writeback]
root        29     2  0 09:16 ?        00:00:00 [crypto]
root        30     2  0 09:16 ?        00:00:00 [bioset]
root        31     2  0 09:16 ?        00:00:00 [kblockd]
root        32     2  0 09:16 ?        00:00:00 [kworker/1:1]
root        33     2  0 09:16 ?        00:00:00 [rpciod]
root        34     2  0 09:16 ?        00:00:00 [kswapd0]
root        35     2  0 09:16 ?        00:00:00 [fsnotify_mark]
root        36     2  0 09:16 ?        00:00:00 [nfsiod]
root        42     2  0 09:16 ?        00:00:00 [kthrotld]
root        43     2  0 09:16 ?        00:00:00 [kworker/0:1]
root        44     2  0 09:16 ?        00:00:00 [VCHIQ-0]
root        45     2  0 09:16 ?        00:00:00 [VCHIQr-0]
root        46     2  0 09:16 ?        00:00:00 [VCHIQs-0]
root        47     2  0 09:16 ?        00:00:00 [iscsi_eh]
root        48     2  0 09:16 ?        00:00:00 [dwc_otg]
root        49     2  0 09:16 ?        00:00:00 [DWC Notificatio]
root        51     2  0 09:16 ?        00:00:00 [VCHIQka-0]
root        52     2  0 09:16 ?        00:00:00 [SMIO]
root        53     2  0 09:16 ?        00:00:00 [deferwq]
root        54     2  0 09:16 ?        00:00:00 [kworker/u8:2]
root        55     2  0 09:16 ?        00:00:00 [kworker/2:1]
root        56     2  0 09:16 ?        00:00:00 [mmcqd/0]
root        58     2  0 09:16 ?        00:00:00 [jbd2/mmcblk0p2-]
root        59     2  0 09:16 ?        00:00:00 [ext4-rsv-conver]
root        74     2  0 09:16 ?        00:00:00 [kworker/3:1]
root       176     1  0 09:16 ?        00:00:00 udevd --daemon
root       200     2  0 09:16 ?        00:00:00 [kworker/1:4]
root       260     2  0 09:16 ?        00:00:00 [3f204000.spi]
root       299   176  0 09:16 ?        00:00:00 udevd --daemon
root       319   176  0 09:16 ?        00:00:00 udevd --daemon
root      1619     1  0 09:17 ?        00:00:00 /usr/sbin/ifplugd -i lo -q -f -u0 -d10 -w -I
root      1642     1  0 09:17 ?        00:00:00 /usr/sbin/ifplugd -i eth0 -q -f -u0 -d10 -w -I
root      1836     1  0 09:17 ?        00:00:00 /bin/sh /etc/init.d/rc 2
root      1845  1836  0 09:17 ?        00:00:00 startpar -p 4 -t 20 -T 3 -M start -P N -R 2
nobody    1903     1  0 09:17 ?        00:00:00 /usr/sbin/thd --daemon --triggers /etc/triggerhappy/triggers.d/
--socket /var/run/thd.socket --pidfile /var/run/thd.pid --user nobody /dev/input/event*
root      1909     2  0 09:17 ?        00:00:00 [kworker/0:2]
root      1912     1  0 09:17 ?        00:00:00 /usr/sbin/rsyslogd -c5
root      2037     1  0 09:17 ?        00:00:00 /usr/sbin/cron
ntp       2050     1  0 09:17 ?        00:00:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 102:104
104       2082     1  0 09:17 ?        00:00:00 /usr/bin/dbus-daemon --system
root      2087  2050  0 09:17 ?        00:00:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 102:104
root      2142  1845  0 09:17 ?        00:00:00 /bin/sh /etc/init.d/rc.local start
root      2148  2142  0 09:17 ?        00:00:00 /bin/sh -e /etc/rc.local
root      2151  2148  0 09:17 ?        00:00:00 /bin/csh -f /MIDAS/TclHttpd/linux-arm/TclHttpd-server
root      2156  2151  0 09:17 ?        00:00:03 /usr/bin/tclsh /MIDAS/TclHttpd/bin/httpd_Server.tcl -uid 0 -gid 0
root      2165     1  0 09:17 ?        00:00:00 dhclient -v -pf /run/dhclient.eth0.pid -lf
/var/lib/dhcp/dhclient.eth0.leases eth0
root      2210     1  0 09:17 ?        00:00:00 /usr/sbin/sshd
root      2269  2210  0 09:18 ?        00:00:00 sshd: pi [priv]  
pi        2273  2269  0 09:19 ?        00:00:00 sshd: pi@pts/0   
pi        2278  2273  0 09:19 pts/0    00:00:00 -bash
pi        2306  2278  0 09:24 pts/0    00:00:00 ps -ef

After selecting Parse USB ...

pi@npg-monitor /tmp $ ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 09:16 ?        00:00:01 init [2]  
root         2     0  0 09:16 ?        00:00:00 [kthreadd]
root         3     2  0 09:16 ?        00:00:02 [ksoftirqd/0]
root         5     2  0 09:16 ?        00:00:00 [kworker/0:0H]
root         6     2  0 09:16 ?        00:00:00 [kworker/u8:0]
root         7     2  0 09:16 ?        00:00:00 [rcu_preempt]
root         8     2  0 09:16 ?        00:00:00 [rcu_sched]
root         9     2  0 09:16 ?        00:00:00 [rcu_bh]
root        10     2  0 09:16 ?        00:00:00 [migration/0]
root        11     2  0 09:16 ?        00:00:00 [migration/1]
root        12     2  0 09:16 ?        00:00:00 [ksoftirqd/1]
root        14     2  0 09:16 ?        00:00:00 [kworker/1:0H]
root        15     2  0 09:16 ?        00:00:00 [migration/2]
root        16     2  0 09:16 ?        00:00:00 [ksoftirqd/2]
root        17     2  0 09:16 ?        00:00:00 [kworker/2:0]
root        18     2  0 09:16 ?        00:00:00 [kworker/2:0H]
root        19     2  0 09:16 ?        00:00:00 [migration/3]
root        20     2  0 09:16 ?        00:00:00 [ksoftirqd/3]
root        21     2  0 09:16 ?        00:00:00 [kworker/3:0]
root        22     2  0 09:16 ?        00:00:00 [kworker/3:0H]
root        23     2  0 09:16 ?        00:00:00 [khelper]
root        24     2  0 09:16 ?        00:00:00 [kdevtmpfs]
root        25     2  0 09:16 ?        00:00:00 [netns]
root        26     2  0 09:16 ?        00:00:00 [perf]
root        27     2  0 09:16 ?        00:00:00 [khungtaskd]
root        28     2  0 09:16 ?        00:00:00 [writeback]
root        29     2  0 09:16 ?        00:00:00 [crypto]
root        30     2  0 09:16 ?        00:00:00 [bioset]
root        31     2  0 09:16 ?        00:00:00 [kblockd]
root        32     2  0 09:16 ?        00:00:00 [kworker/1:1]
root        33     2  0 09:16 ?        00:00:00 [rpciod]
root        34     2  0 09:16 ?        00:00:01 [kswapd0]
root        35     2  0 09:16 ?        00:00:00 [fsnotify_mark]
root        36     2  0 09:16 ?        00:00:00 [nfsiod]
root        42     2  0 09:16 ?        00:00:00 [kthrotld]
root        43     2  0 09:16 ?        00:00:01 [kworker/0:1]
root        44     2  0 09:16 ?        00:00:00 [VCHIQ-0]
root        45     2  0 09:16 ?        00:00:00 [VCHIQr-0]
root        46     2  0 09:16 ?        00:00:00 [VCHIQs-0]
root        47     2  0 09:16 ?        00:00:00 [iscsi_eh]
root        48     2  0 09:16 ?        00:00:00 [dwc_otg]
root        49     2  0 09:16 ?        00:00:00 [DWC Notificatio]
root        51     2  0 09:16 ?        00:00:00 [VCHIQka-0]
root        52     2  0 09:16 ?        00:00:00 [SMIO]
root        53     2  0 09:16 ?        00:00:00 [deferwq]
root        54     2  0 09:16 ?        00:00:00 [kworker/u8:2]
root        55     2  0 09:16 ?        00:00:00 [kworker/2:1]
root        56     2  0 09:16 ?        00:00:02 [mmcqd/0]
root        58     2  0 09:16 ?        00:00:00 [jbd2/mmcblk0p2-]
root        59     2  0 09:16 ?        00:00:00 [ext4-rsv-conver]
root        74     2  0 09:16 ?        00:00:00 [kworker/3:1]
root       176     1  0 09:16 ?        00:00:00 udevd --daemon
root       200     2  0 09:16 ?        00:00:00 [kworker/1:4]
root       260     2  0 09:16 ?        00:00:00 [3f204000.spi]
root       299   176  0 09:16 ?        00:00:00 udevd --daemon
root       319   176  0 09:16 ?        00:00:00 udevd --daemon
root      1619     1  0 09:17 ?        00:00:00 /usr/sbin/ifplugd -i lo -q -f -u0 -d10 -w -I
root      1642     1  0 09:17 ?        00:00:01 /usr/sbin/ifplugd -i eth0 -q -f -u0 -d10 -w -I
nobody    1903     1  0 09:17 ?        00:00:00 /usr/sbin/thd --daemon --triggers /etc/triggerhappy/triggers.d/
--socket /var/run/thd.socket --pidfile /var/run/thd.pid --user nobody /dev/input/event*
root      1909     2  0 09:17 ?        00:00:00 [kworker/0:2]
root      1912     1  0 09:17 ?        00:00:00 /usr/sbin/rsyslogd -c5
root      2037     1  0 09:17 ?        00:00:00 /usr/sbin/cron
ntp       2050     1  0 09:17 ?        00:00:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 102:104
104       2082     1  0 09:17 ?        00:00:00 /usr/bin/dbus-daemon --system
root      2087  2050  0 09:17 ?        00:00:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 102:104
root      2165     1  0 09:17 ?        00:00:00 dhclient -v -pf /run/dhclient.eth0.pid -lf
/var/lib/dhcp/dhclient.eth0.leases eth0
root      2210     1  0 09:17 ?        00:00:00 /usr/sbin/sshd
root      2269  2210  0 09:18 ?        00:00:00 sshd: pi [priv]  
pi        2273  2269  0 09:19 ?        00:00:00 sshd: pi@pts/0   
pi        2278  2273  0 09:19 pts/0    00:00:00 -bash
root      2309     2  0 09:28 ?        00:00:00 [kworker/1:1H]
root      2310     2  0 09:28 ?        00:00:00 [kworker/3:1H]
root      2311     2  0 09:29 ?        00:00:00 [kworker/0:0]
root      2312     1  0 09:29 tty1     00:00:00 /sbin/getty --noclear 38400 tty1
root      2313     1  0 09:29 tty2     00:00:00 /sbin/getty 38400 tty2
root      2314     1  0 09:29 tty3     00:00:00 /sbin/getty 38400 tty3
root      2315     1  0 09:29 tty4     00:00:00 /sbin/getty 38400 tty4
root      2316     1  0 09:29 tty5     00:00:00 /sbin/getty 38400 tty5
root      2317     1  0 09:29 tty6     00:00:00 /sbin/getty 38400 tty6
root      2318     1  0 09:29 ?        00:00:00 /sbin/getty -L ttyAMA0 115200 vt100
root      2319     2  0 09:29 ?        00:00:00 [kworker/u8:1]
pi        2332  2278  0 09:32 pts/0    00:00:00 ps -ef

The httpd server appears to have died

14.10 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 75% M-H markers
      Temperature +25.7 deg C dew point +8.2 deg C RH 32.4%

      DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

14.14 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4
      11x <20k, 22x <50k, 24x <100k - 13x <20k yesterday

      1.8.L spectra - see attachments 5 & 6
      nnaida1 73 ch FWHM, nnaida3 78 ch FWHM - no change cf. yesterday
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8
      FEE64 Rate spectra - attachment 9

      Check ASIC Control *all* FEE64s & ASICs
      zero all spectra

16.05 slow comparator 0x8
      good event statistics OK - see attachments 10
      2x <20k, 11x <50k, 18x <100k

      slow comparator 0x9
      good event statistics OK - see attachments 11
      6x <20k, 19x <50k, 23x <100k

      slow comparator 0xa
      good event statistics OK - see attachments 12
      10x <20k, 21x <50k, 24x <100k 

09.30 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 75% M-H markers
      Temperature +25.1 deg C dew point +9.7 deg C RH 37.9%

      DAQ continues OK

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4
      13x < 20k, 22x <50k, 24x <100k

      1.8.L spectra - see attachments 5 & 6
      nnaida1 73 ch FWHM, nnaida3 78 ch FWHM
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 7
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 8

/etc/dhcp/dhcpd.conf updated to reflect actual MAC and IP 
addresses for nnrpi1 and to add nnrpi2 to /etc/hosts

nnrpi1

% /sbin/ifconfig -a
eth0      Link encap:Ethernet  HWaddr b8:27:eb:0b:f6:73  
          inet addr:10.1.1.114  Bcast:10.1.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9315838 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9579504 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:492141377 (469.3 MiB)  TX bytes:3950371110 (3.6 GiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:8485967 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8485967 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:2807265055 (2.6 GiB)  TX bytes:2807265055 (2.6 GiB)

nnrpi2

pi@npg-monitor ~ $ ifconfig -a
eth0      Link encap:Ethernet  HWaddr b8:27:eb:6b:0a:a0  
          inet addr:10.1.1.117  Bcast:10.1.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:806 errors:0 dropped:0 overruns:0 frame:0
          TX packets:872 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:66327 (64.7 KiB)  TX bytes:548797 (535.9 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Offline analysis of alpha background data files May19/R1, R2, R7, R8, R9, R11 ( c. 380h )

1  per DSSSD m_p versus m_n
2  per DSSSD x versus y
3  per DSSSD E_p versus E_n
4  per DSSSD E_p versus E_n - zoom to 5 & 7Mev groups
5  hit pattern ( DSSSD order ) versus E
6  x & y projections of 5 & 7MeV groups from hit pattern ( DSSSD order ) versus E
7  hit pattern ( DSSSD order)
8  hit pattern ( ASIC order )

AA informs me that the *centre* of the DTAS detector system is 26.7cm downstream
of the upstream edge of the upstream DTAS NaI(Tl) detectors.

The 6x DSSSDs are currently positioned per the 8x DSSSD setup of June 2018, i.e.
the 6x DSSSDs are in positions 3-8 (as indicated on the AIDA snout). 

Detectors #4 & #5 are centred ~9cm from upstream edge of AIDA snout.

This means that the upstream edge of the AIDA snout should be 26.7-9=17.7cm 
from the upstream edge of the upstream DTAS NaI(Tl) detectors.

10.50 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers - topped up 1x jugful to 100% M-H markers
      Temperature +25.6 deg C dew point +9.6 deg C RH 36.2%

      DAQ continues OK to file May19/R11_8

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

11.00 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 10

12.26 analysis of May19/R11_8 - see attachments 11
      deadtime OK

11.05 DAQ stop file May19/R11_8

      slow comparator 0x64 -> 0xa
      Check ASIC Control *all* ASICs & FEE64s

      good event statistics OK - see attachments 12
      11x < 20k, 20x <50k, 23x <100k

11.25 DAQ start file May19/R12

      Pulser walkthrough

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 
      amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      frequency 250Hz range
      delay MIN
      tail pulse
      - polarity

      1.8.L spectra - see attachments 13 & 14

11.35 DAQ stop file May19/R12_1

11.48 DAQ start file May19/R13

      Pulser walkthrough

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 
      amplitude 12,000 - 2,000 @ 2,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      frequency 250Hz range
      delay MIN
      tail pulse
      - polarity

      1.8.L spectra - see attachments 15 & 16

11.55 DAQ stop file May19/R13_1

16.20 AIDA moved into DTAS
      Upstream edge of AIDA snout 17.7cm downstream of the upstream edge of the upstream DTAS NaI(Tl) detectors
      which positions DSSSDs #3 & #4 at centre of DTAS. We will need to adjust the position of AIDA when we have
      implant  and PID-gated implant-decay correlation data to identify where specific isotopes stop.

 
17.05 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 80% M-H markers
      Temperature +25.5 deg C dew point +9.3 deg C RH 35.9%

      detector biases & leakage currents OK - see attachments 17 & 18

      FEE64 temperatures OK - see attachment 19
      good event statistics OK - see attachments 20
      14x <20k, 22x <50k, 1x >100k


      BNC PB-4 
      amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      frequency 25Hz range
      delay MIN
      tail pulse
      - polarity

      1.8.L spectra - see attachments 21 & 22

FEE FWHM
#   (ch)
1   73
2   120
3   77
4   77
5   73
6   81
7   77
8   72
9   85
10  90
11  96
12  96
13  97
14  69
15  85
16  86
17  73
18  84
19  130
20  114
21  82
22  73
23  99
24  105

      p+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - attachments 23-26
      n+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - attachments 27-30

12.14 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers
      Temperature +25.8 deg C dew point +6.7 deg C RH 29.6%

      DAQ continues OK to file May19/R11_5

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 10

12.26 analysis of May19/R11_5 - see attachments 11
      deadtime OK
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2

      Check ASIC Control *all* ASICs & FEE64s

14.32 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers
      Temperature +25.6 deg C dew point +3.1 deg C RH 23.1%

      DAQ continues OK to file May19/R11_3

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 10

14.37 analysis of May19/R11_2 & R11_3 - see attachments 11 & 12
      deadtime OK *except* nnaida1
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2
      Statistics imply nnaida1 discriminators running at high rate for some part of R11_2 & R11_3

14.39 Check ASIC Control *all* ASICs & FEE64s

Offline analysis of alpha background data files May19/R1, R2, R7, R8, R9 ( c. 310h )

1  per DSSSD m_p versus m_n
2  per DSSSD x versus y
10 per DSSSD E_p versus E_n
3  2D contours
4  hit pattern ( DSSSD order ) versus E
5  hit pattern ( DSSSD order)
6  hit pattern ( ASIC order )
7  sort program
8  sort variables 
9  sort spectra titles
11 x & y projections of 5 & 7MeV groups from hit pattern ( DSSSD order ) versus E

11.04 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 75% M-H markers
      Temperature +26.1 deg C dew point +4.2 deg C RH 24.4%

      DAQ continues OK to file May19/R9_5

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 10

14.17 analysis of May19/R9_5 - see attachment 11
      deadtime OK *except* nnaida22 
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2
      Statistics imply nnaida22 running at high rate for some part of R9_5

      analysis of May19/R9_4 - see attachment 12
      No indication of higher rates for nnaida22

11.19 Check ASIC Control *all* ASICs & FEE64s

11.29 zero DAQ statistics

14.42 DAQ stop file May19/R9_6

      Run stopped to move AIDA out of DTAS prior to changes to Pb shielding upstream of (CH2)n shield

15.01 AIDA removed from inside DTAS

      Slow comparator 0x64 -> 0xa

      Check ASIC Control *all* ASICs & FEE64s

      good event statistics OK - see attachments 13
      13x < 20k, 22 < 50k, 0 > 100k

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 14
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 15

      all system wide checks OK *except* nnaida7 fails ADC calibration

      zero all histograms

      Slow comparator 0xa -> 0x64

      Check ASIC Control *all* ASICs & FEE64s

15.08 DAQ start file May19/R10

      nnaida1 'good event' rate changed from c. 380Hz to 0Hz at Start ASIC Readout - DAQ stopped

15.10 DAQ start file May19/R11  

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

14.08 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 75% M-H markers
      Temperature +26.5 deg C dew point +6.2 deg C RH 27.6%

      DAQ continues OK to file May19/R8_8

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 10

14.17 analysis of May19/R8_8 - see attachment 11
      deadtime OK
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2

14.39 DAQ stop file May19/R8_8

      AIDA to be moved into position within DTAS for efficiency tests with 137Cs/60Co sources
      positioned immediately upstream of the end of the AIDA snout

15.07 End of AIDA snout now 16cm from upstream edge of upstream NaI detectors
      i.e. DSSSD#3 centred between upstream/downstream NaI detectors

      Slow comparator 0x64 -> 0xa

      Check ASIC Control *all* ASICs & FEE64s

      good event statistics OK - see attachments 12
      15x < 20k, 21x < 50k, 1x > 100k

      p+n FEE64s 1.8.W spectra 20us FSR - attachment 13
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 14

      Slow comparator 0xa -> 0x64

      Check ASIC Control *all* ASICs & FEE64s

      All histograms zero'd

15.24 DAQ start file May19/R9

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

16.03 Water level topped up (1x jugful) to H level marker

10:18 DAQ Continues ok
      Alpha run continues - Currently on file R8_2

      System wide checks all ok

      Detector bias/leakage currents ok - attachment 1
     
      Temp +25.6 deg C, Humidity 34.5% AND D.P +8.8 deg C
      
      FEE Temperatures ok - attachment 2

      Good event statistics ok - attachment 3

      Merger & TapeServer ok - attachments 4 & 5


17.15 DAQ continues OK to file May19/R8_2

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 6 & 7

      FEE64 temperatures OK - see attachment 8
      good event statistics OK - see attachments 9

      Merger OK - see attachment 10
      TapeServer OK - see attachment 11

      1.8.L spectra - see attachments 12 & 13
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 14 
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 15

17.25 analysis of May19/R8_2 - see attachment 16
      deadtime OK
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2

17.27 Check ASIC Control *all* ASICs & FEE64s

13.27 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers - water topped up (1x jugful) to H level marker
      Temperature +25.4 deg C dew point +9.6 deg C RH 36.3%

10:28 DAQ Continues ok
      Alpha run continues - Currently on file R7_5

      System wide checks all ok
      leakage currents are up from yesterday - attachment 1
      Temperature is up 2 deg C from yesterday which explains leakage current increase
      Temp +26.6 deg C, Humidity 28.8% AND D.P +7.2 deg C
      
      FEE Temperatures ok - attachment 2

      Good event statistics ok - attachment 3

17.40 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water level 75% H-L markers
      Temperature +25.4 deg C dew point +7.2 deg C RH 30.9%

17.47 DAQ continues OK to file May19/R7_6

      alpha background

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except*
      nnaida7 fails ADC calibration
      Check SYNC errors not counted since Baseline - see attachment 4 - also failed test following Collect All
SYNC Count Errors for Baseline
       N.B. Check SYNC pulses received OK

      detector biases & leakage currents OK - see attachments 5 & 6

      FEE64 temperatures OK - see attachment 7
      good event statistics OK - see attachments 8

      Merger OK - see attachment 9
      TapeServer OK - see attachment 10

17.53 DAQ stopped file May19/R7_6

      DAQ RESET
      DAQ SETUP
      all system wide checks OK *except* nnaida7 fails ADC calibration   
      Sync all ASIC clocks using Re-Sync   
      Check ASIC Control *all* ASICs & FEE64s

17.57 DAQ start file May19/R8

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

13.13 analysis of May19/R7_6 - see attachment 11
      deadtime OK
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2

10.23 Low energy calibration program now produces relative gain coefficients in a format that can be used with AIDASort

      using sorted alpha data Oct18/R29*

      30 2.0GB files of data

      LHS: Data sorted without relative gain-matching

      RHS: Data sorted with relative gain-matching

      Attachments (1-4) - DSSD1 - Ey-Ex

                                - Ey vs Ex

                                - Energy difference vs x strip

                                - Energy difference vs y strip

      Attachments (5-8) - DSSD2 - Ey-Ex

                                - Ey vs Ex

                                - Energy difference vs x strip

                                - Energy difference vs y strip

      Attachments (9-12) - DSSD3 - Ey-Ex

                                - Ey vs Ex

                                - Energy difference vs x strip

                                - Energy difference vs y strip

      Attachments (13-16) - DSSD4 - Ey-Ex

                                - Ey vs Ex

                                - Energy difference vs x strip

                                - Energy difference vs y strip

      Attachments (17-20) - DSSD5 - Ey-Ex

                                - Ey vs Ex

                                - Energy difference vs x strip

                                - Energy difference vs y strip

      Attachments (21-24) - DSSD6 - Ey-Ex

                                - Ey vs Ex

                                - Energy difference vs x strip

                                - Energy difference vs y strip

     
      Attachment 25 - Table comparing peak centroids and peak width (deviation, sigma) of Ey - Ex plots before and after gainmatching

                    - numbers found with simple gaussian fit
            

      

      

      

12.47 DAQ continues OK to file May19/R7_3

      alpha background

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

12.51 Check ASIC Control *all* ASICs & FEE64s

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - attachments 9-12
      n+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - attachments 13-16

13.13 analysis of May19/R7_3 - see attachment 17
      deadtime OK
      ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
      Also observed at a much lower rate for nnaida1 & nnaida2

13.27 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water topped up to H level marker
      Temperature +24.6 deg C dew point +7.1 deg C RH 32.6%

10.18 DAQ continues OK to file May19/R5_1

      alpha background

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.W spectra 20us FSR - attachments 7 & 8
      1.8.W spectra 20ms FSR - attachments 9 & 10

      Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water topped up
      Temperature +24.8 deg C dew point +8.3 deg C RH 35.3%

10.42 DAQ stop May19/R5_2

      slow comparator 0x64 -> 0xa
      Check ASIC Control *all* ASICs & FEE64s

10:52 AIDA inserted ~4cm into DTAS
      60Co (~40kBq) + 137Cs (~8kBq) sources located approximately 4cm in front of the front face of the snout

10.54 DAQ start May19/R6

      good event statistics OK - see attachments 11
      *all* FEE64s <100k, 9x < 20k
      data rate 4.9Mb/s 0.64M data items/s

11.04 nnaida17 good events c. 350k returns to 13k following Check ASIC Control (nnaida1 OK - see
https://elog.ph.ed.ac.uk/AIDA/801 )
      AIDA disc statistics indicate that fast discriminators were source of higher rate - next time this 
      happens we should check HitRate to see whether this is a specific channel or channels and possibly 
      mask

11.17 DTAS DAQ issues correlation scaler reset 
      AIDA data file May19/R6_3

      use files *from* R6_4

11.39 DAQ stop file May19/R6_8

      nnrpi1 is offline - we suspect wrench or power tool placed too close to RPi when we moved AIDA
      into DTAS and we jostled one or other of the cables connected to nnrpi1

      nnrpi1 power cycled to reboot
      *all* FEE64s OK
      USB ac mains relay controls recovered OK
      CAEN N1419 contrs recovered OK

11.48 AIDA withdrawn from DTAS for installation of upstream (CH2)n shield and additional Pb wall

11.52 DAQ starts to file May19/R7

      alpha background resumes

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

18.06 DAQ continues ok, on file May19/R7_0

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachment 13

      FEE64 temperatures OK - see attachment 14
      good event statistics OK - see attachment 15

      Merger and TapeServer ok

      Temperature +25.0 deg C dew point +4.4 deg C RH 27.0%



  

10:13 all system wide checks OK *except* nnaida7 fails ADC calibration

      FEE64 temperatures OK - see attachment 1
      good event statistics OK - see attachments 2

      detector biases & leakage currents OK - see attachment 3

      Temperature + deg 24.7C dew point +8.6 deg C RH 35.0%

      Merger and TapeServer ok

10:30 DAQ, merger, TapeServer stop 

      Alpha run stopped at AIDA file TapeData/May19/R2_5

      slow comparator threshold lowered to 10 keV (0xa)

      DAQ start, not writing to file

      good event statistics after lowering threshold, ok (attachment 4)

10:49 1.8.W spectra 20ms FSR - attachments 5 & 6

11:25 started writing to file R3 (sync test)
      low threshold run at 5mb/s

11:33 DAQ stop (R3)

      slow comparator threshold raised to 100 kev (0x64)

      DAQ start, alpha run

      Writing to file TapeData/May19/R4

18.49 alpha background

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

      FEE64 temperatures OK - see attachment 7
      good event statistics - see attachments 8 - nnaida1 405k & nnaida17 368k, all other FEE64s c. 380Hz as
expected
      ASIC check for *all* ASICs & FEE64s restored all FEE64 rates to expected c. 380Hz - see attachment 13

      detector biases & leakage currents OK - see attachments 9 & 10

      Merger OK - no error messages - see attachment 11
      TapeServer OK - see attachment 12

      all system wide checks OK *except* nnaida7 fails ADC calibration *and* Check Sync errors not counted Since
Baseline - see attachment 14

      DAQ stopped May19/R4_3

aidas1> ls -l /TapeData/May19
total 19808048
-rw-rw-rw-. 1 npg npgstaff 1908736000 May 14 18:28 R1_0
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 15 02:30 R2_0
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 15 10:20 R2_1
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 15 18:08 R2_2
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 16 01:57 R2_3
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 16 09:45 R2_4
-rw-rw-rw-. 1 npg npgstaff  190447616 May 16 10:28 R2_5
-rw-rw-rw-. 1 npg npgstaff 1109327872 May 16 11:28 R3_0
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 16 18:39 R4_0
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 16 18:45 R4_1
-rw-rw-rw-. 1 npg npgstaff 2097152000 May 16 18:50 R4_2
-rw-rw-rw-. 1 npg npgstaff  225312768 May 16 18:54 R4_3
-rw-rw-rw-. 1 npg npgstaff   52494336 May 16 19:10 R5_0

      Wahtever the issue was it probably occurred before 18.39

      DAQ RESET
      DAQ SETUP
      ASIC check for *all* ASICs & FEE64s
      all system wide checks OK *except* nnaida7 fails ADC calibration
      Sync all ASIC clocks using Re-SYNC

      DAQ started May19/R5

19.23 1.8.W spectra - see attachments 15 & 16

10.18 DAQ continues OK to file May19/R2

      alpha background

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - attachments 7 & 8
      1.8.W spectra 20us FSR - attachments 10 & 11
      1.8.W spectra 20ms FSR - attachments 10 & 11

      Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water topped up
      Temperature + deg 24.7C dew point +7.5 deg C RH 33.3%

      FEE64 nnaida1-4 temperature logs - see attachments 12-15
      all FEE64 temperatures appear to be stable 

11.05 check ASIC control *all* FEE64s and ASICs

11.13 analysis of file May19/R2_1 - see attachment 16
      ADC rate c. 72Hz dominated by same, single hot channel (Stat spectrum ch# 104) in each of FEE64s nnaida1,
2, 5 & 6 otherwise looks OK
      sync pulser rate 10Hz confirmed by JA

17.25 all system wide checks OK *except* nnaida7 fails ADC calibration

      FEE64 temperatures OK - see attachment 18
      good event statistics OK - see attachments 19

      detector biases & leakage currents OK - see attachment 20

      Temperature + deg 24.5C dew point +8.2 deg C RH 34.1%

      Merger and TapeServer ok

10.20 System wide checks ok (except naida07 ADC calibration failure)

      FEE temperatures ok (attachment 1)

      good event statistics ok (attachment 2)

      detector bias and leakage currents ok (attachment 3)

      DAQ stopped

10.40 pulser switched off

      slow comparator threshold raised to 0x64
      
      DAQ, merger, TapeServer started - all ok (attachments 4 and 5)

      writing to file R1 in TapeData/May19 at 70 kb/s

      good event statistics (attachment 6)

16:11 Tapeserver and merger still ok
      DAQ still running
      System wide checks all ok *except nnaida7 fails ADC calibration*
      Bias and leakage currents ok - attachment 7
      FEE Temperatures ok - attachment 8
      Statistics still ok
      
      Spectrum are showing alpha events (Layout 4) - attachment 9

18:25 Tektronix clock accidentally unplugged. DAQ has stalled as a result.
      Clock reset to 50MHz 5V TTL signal

18:29 System wide check of clock status shows error message in attachment 10

      DAQ Reset
      With slow comp at oxa statistics are still good - attachment 11
      System wide checks all ok *except nnaida7 fails ADC calibration*
      Resync to the ASIC clock
      All histograms zeroed

18:37 Slow comp threshold raised to 0x64 for alpha run
      Writing to file:
      May19/R2_0
      

      

      

      

      

OH setup AIDA external clock using  Tektronix AFG3102 - settings as follows

CH1 ON - amplitude +5V, phase 0n deg, offset 0V, frequency 50.000000MHz

JA setup DTAS/BigRIPS clock using Tektronix AFG3102 - settings as follows

CH2 ON - amplitude -0.8V, phase 0n deg, offset 0V, frequency 25.000000MHz

Unfortunately the AGF3102 was set to CH1 frequency = CH2 frequency and this changed the AIDA external
clock frequency from 50MHz to 25MHz.

This stopped the DAQ. Interestingly it was possible to Resync successfully and *all* system wide
checks were OK *except* Check Clock Status which produced errors - see attachment 1.

CH1 & CH2 now set to 50MHz and 25MHz respectively.

AIDA DAQ now running OK.

AIDA@RIKEN

Selecting SETUP (Run Control tab) or Perform Timestamp Resync (AIDA Control tab) produces error message - see
attachment 1

Selecting Perform Resync (AIDA Master Timestamp Control) works OK

19.12 all system wide checks OK *except* nnaida7 fails ADC calibration

      FEE64 temperatures OK - see attachment 9
      detector biases & leakage currents OK - see attachments 10 & 11
      good event statistics OK - see attachment 12
      all FEE64s <100k, 10x < 20k

      1.8.W spectra 20us FSR - see attachments 13 & 14

09.55 all system wide checks OK *except* nnaida7 fails ADC calibration

      FEE64 temperatures OK - see attachment 1

      good event statistics OK - see attachment 2
      all FEE64s <100k, 11x < 20k

      1.8.L spectra - see attachments 3 & 4
      nnaida1 70ch FWHM, nnaida3 80 ch FWHM

      detector biases & leakage currents OK - see attachments 5 & 6

      1.8.W spectra 20us FSR - see attachments 7 & 8

      nnaida1 Options, Local Controls, Data Redaout, Discriminator Controls - see attachment 9-13

      Lost Activity Monitor -see attachment 14

18.01 DAQ found stopped

      This was caused by a chnage to the AIDA external clock frequency - see https://elog.ph.ed.ac.uk/AIDA/798

      Following change of AIDA external clock frequency to 50MHz

      DAQ RESET
      DAQ SETUP

      Sync all ASIC clocks using Resync
      
      all system wide checks OK *except* nnaida7 fails ADC calibration

      zero all histograms

      DAQ GO

18.31 FEE64 temperatures OK - see attachment 15

      good event statistics OK - see attachment 16
      all FEE64s <100k, 10x < 20k

      detector biases & leakage currents OK - see attachments 17 & 18

10:52 system wide checks ok, except naida07 fails ADC calibration
      good event statistics, rates in naida19,20,23,24 high (attachment 1)
      FEE temperatures ok (attachment 2)
      detector bias/leakage currents stable (attachment 3)

11.00 - chiller refilled and switched on
        set to 20 degrees celsius

        AIDA stand moved and secured in F11
        clock connected -> 50 MHz square wave at 5.0 V

        AIDA connected to power box
        network cables attached
        NIM modules switched on

        Raspberry Pis switched on
        Detector bias switched on for detectors 1-6
     
        
        
13.58 - AIDA power relay 1,2,5,6 sequenced on
       bias/leakage currents ok (attachment 1)
       DAQ setup
       System wide checks ok, except naida07 fails ADC calibration, and clock status check returns error in
nnaida06, 5.

       Above issue with clock no longer present

       FEE temperatures ok (attachment 2)
       good event statistics (attachment 3)

16.30 1.8.W spectra n+n strips
      FSR 20us, 200us, 2ms, 20ms attachments 4-7

      1.8.W spectra p+n strips
      FSR 20us, 200us, 2ms, 20ms attachments 8-11
       
      compare with https://elog.ph.ed.ac.uk/AIDA/746

      naida19, naida20, naida23 show low frequency noise structure, worse than in above elog entry

17.22 1.8.L spectra p+n strips

      peaks:

      aida01 72
      aida02 112
      aida03 80
      aida04 78
      aida05 74
      aida06 95
      aida07 78
      aida08 71
      aida09 82
      aida10 85
      aida11 93
      aida12 96
      aida13 101
      aida14 70
      aida15 87
      aida16 87
      aida17 69
      aida18 83
      aida19 127
      aida20 116
      aida21 84
      aida22 74
      aida23 108
      aida24 117
      

      

Inventory is currently packaged up under the AIDA desk in B3F


2 FEE64 Modules

Module 1 - MAC Addresses
2B:33:15
2B:22:6E <- Loose HDMI

Module 2 - MAC Addresses
2B:09:DA <- ASIC #1 HEC Hot Channel, LEC noisy
2B:11:C5 <- Missing ASIC

MACB A-MP 202394 -2    72-38

MACB RevB Ser38 AMP 202394-2

MACB RevB AMP 202394-2   81-49

https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=1347508769

15.04 Plots of X Energy vs Y Energy for each detector, and for 4 different Al degrader thicknesses, as indicated
on each graph. (Attachments 1-4)

13.53 Correlation analysis plot of all detectors with 3.3mm Al degrader thickness (attachment 1)
 
13.54 Correlation analysis plot of detectors 1 and 2 with 3mm, 2.3mm and 2.8mm degrader thickness (attachment 2)
      Correlation analysis plot of detectors 3 and 4 with 3mm, 2.3mm and 2.8mm degrader thickness (attachment 3)
      Correlation analysis plot of detectors 5 and 6 with 3mm, 2.3mm and 2.8mm degrader thickness (attachment 4)

14.02 Plots made over first 200ms of data

07.56 DAQ continues - AIDA file RIBF148/R5_822
      165Pm BigRIPS setting + 2.8mm Al degrader

08.13 zeroed xy hit pattern on online analysis and MIDASsort

08.30 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 1)
      good event statistics ok (attachment 2)
      detector bias/leakage currents ok (attachment 3)

08.34 Merger and TapeServer ok, no error messages in terminal (attachments 4/5)

08.40 zeroed all spectra on online analysis and MIDASsort

08.44 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_830

08.45 BigRIPS starts run 1087
      BRIKEN starts run 102
      AIDA on file RIBF148/R5_830

09.13 n vs p multiplicity (attachment 6)
      xy hit pattern (*deleted, took wrong screenshot, sorry! -CA@12.16*)
      Energy X vs Energy Y plot (*deleted, took wrong screenshot, sorry! -CA@12.16*)

12.17 see elog entry for 15th November 2018 00.00-08.00 (attachments 9 and 10) for screenshots of the above before
      degrader change
      
09.17 BRIKEN and BigRIPS stop
      AIDA on file RIBF148/R5_836
      beam stop to change Al degrader thickness to 3.3mm

09.23 chiller refilled while access available
      humidity, temperature, dew point measurements obtained

09.25 detector bias/ leakage currents ok (attachment 7)

09.30 zeroed all spectra in online analysis and MIDASsort

09.31 beam back on
      BRIKEN and BigRIPS start
      AIDA file RIBF148/R5_838
      BRIKEN run 103
      BigRIPS run 1088

10.32 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_848

10.33 BRIKEN and BigRIPS start
      AIDA file RIBF148/R5_848
      BRIKEN run 104
      BigRIPS run 1089

10.45 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 8)
      good event statistics ok (attachment 10)
      detector bias/leakage currents ok (attachment 9)

11.20 ran analyser on file R5_847 - attachment 11
      no timewarps observed
      dead time in nnaida19 at ~1s out of 355.283s (~0.3%)
      rest at zero, except nnaida20 at ~0.6s and nnaida21 at ~0.1s

11.33 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_859

11.34 BRIKEN and BigRIPS start
      AIDA file RIBF148/R5_859
      BRIKEN run 105
      BigRIPS run 1090

12.05 n vs p multiplicity (attachment 12)
      xy hit pattern (attachment 13)
      Energy X vs Energy Y plot (attachment 14)
      this is after change of Al degrader thickness to 3.3mm

12.36 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_869

12.36 BRIKEN and BigRIPS start
      AIDA file RIBF148/R5_869
      BRIKEN run 106
      BigRIPS run 1091

12.40 online histograms
      per FEE64 Rate - attachment 15
      per FEE64 HitRate - attachment 16
      1.8.L spectra - attachments 17-20
       nnaida1 pulser peak width 70ch FWHM
      1.8.H spectra - attachments 21-22
      1.8.W spectra - attachments 23-24

12.47 beam off
      AIDA file RIBF148/R5_870

12.54 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_871

13.10 MIDASsort analysis RIBF148/R5_871 - all ADC data synchronised - attachments 25-26

13.16 correlation analysis decay plots for each detector with the Al degrader thickness at 3.3mm (attachment 23)
      see elog entry November 15th 2018 00:00-08:00 (attachments 16-18) for same plots with previous degrader
      thickness.

13.26 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 24)
      good event statistics ok (attachment 25)
      detector bias/leakage currents ok (attachment 26)

15.04 see other elog entries for correlation analysis and high energy Ex vs Ey plots compared between different Al
degrader thicknesses.

15.38 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 28)
      good event statistics ok (attachment 27)
      detector bias/leakage currents ok (attachment 29)

15.55 BRIKEN start background measurement
      BRIKEN not writing to file
      AIDA file RIBF148/R5_896
      Online histograms available

16.00 BRIKEN start writing to file
      AIDA file RIBF/R5_897
      BRIKEN run 107

17.18 DAQ stop AIDA file RIBF148/R5_907

      End of run RIBF148 due to accelerator problems requiring ~3-4 days to fix
      'low' mass BigRIPS setting postponed 

      ASIC check load

      all onine histograms zero'd

17.22 DAQ start AIDA file RIBF148/R6
      Pulser walkthrough
      BNC PB-4 amplitudes 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      Frequency 25Hz range
      Delay MIN
      Polarity -
      Tail pulse

17.37 DAQ trop AIDA file RIBF148/R6_2
      1.8.L spectra - see attachments 30 & 31
 

17.40 DAQ start AIDA file RIBF148/R7
      Pulser walkthrough
      BNC PB-4 amplitudes 1,200 - 1,000 @ 1,000 step
      x5 attenuator IN
      Frequency 25Hz range
      Delay MIN
      Polarity -
      Tail pulse

17.50 DAQ stop AIDA file RIBF148/R7_1
      1.8.L spectra - see attachments 32 & 33

17.54 DAQ start AIDA file RIBF148/R8
      background
      BNC PB-4 pulser OFF

18.00 detector biases & leakage currents OK - see attachments 34 & 35

      FEE64 temperatures OK - see attachment 36
      good event statistics OK - see attachments 37

      Merger OK - see attachment 38
      TapeServer OK - see attachment 39
      no error or warning messages terminal server sesssions reported

      per FEE64 Rate spectra - attachment 40

      1.8.W spectra 20ms FSR - attachments 41 & 42

18.10 DAQ stop AIDA file RIBF148/R8_2

      Detector bias OFF
      FEE64 power OFF

18.12 Ambient temperature +25.5 deg C, d.p. +2.2 deg C, RH 21.5%

18.15 Withdraw AIDA from BRIKEN - done

      2x NIM bin OFF
      1x NIM bin fan tray OFF
      1x USB ac mains relay OFF
      Julabo FL11006 chiller OFF front panel/rear panel/wall-mounted 3ph outlet
      2x network cables disconnected and coiled/cable-tied to stairwell railings
      disconnect coorelation scaler trigger & reset inputs to root MACB front panel
      disconnect 50MHz TTL clock root MACB rear panel
      disconnect AIDA plastic veto
      discopnnect 2x ac mains cabnles from ac mains distribution box

      remove AIDA support assembly nose support
19.00 raise AIDA support assembly feet/lower AIDA support assembly wheels from/to F11 floor


       











 








      
      












      



      



      


  
     
      






 

00.25 System wide checks ok * except nnaida 7 fails adc*
      FEE Temps ok - attachment 1
      Stats ok - attachment 2 
      Leakage currents ok - attachment 3
      tape server and merger ok

00:57 BigRIPS and BRIKEN stop
      AIDA on file R5_753

00.59 BigRIPS starts run 1079
      BRIKEN starts run 94
      AIDA on file R5_753

01:56 BigRIPS and BRIKEN stop
      AIDA on file R5_762

01.57 BigRIPS starts run 1080
      BRIKEN starts run 95
      AIDA on file R5_762

02:47 BigRIPS and BRIKEN stop
      AIDA on file R5_770

02.48 BigRIPS starts run 1081
      BRIKEN starts run 96
      AIDA on file R5_770

03:45 BigRIPS and BRIKEN stop
      AIDA on file R5_780

03.47 BigRIPS starts run 1082
      BRIKEN starts run 97
      AIDA on file R5_780

04:45 BigRIPS and BRIKEN stop
      AIDA on file R5_790

04.47 BigRIPS starts run 1083
      BRIKEN starts run 98
      AIDA on file R5_790

04.50 System wide checks ok * except nnaida 7 fails adc*
      FEE Temps ok - attachment 4
      Stats ok - attachment 5
      Leakage currents ok - attachment 6
      tape server and merger ok

05.46 BigRIPS and BRIKEN stop
      AIDA on file R5_800

05.47 BigRIPS starts run 1084
      BRIKEN starts run 99
      AIDA on file R5_800

06.45 BigRIPS and BRIKEN stop
      AIDA on file R5_810

06.46 BigRIPS starts run 1085
      BRIKEN starts run 100
      AIDA on file R5_810

07.25 System wide checks ok * except nnaida 7 fails adc*
      FEE Temps ok - attachment 7
      Stats ok - attachment 8
      Leakage currents ok - attachment 9
      tape server and merger ok

07.44 BigRIPS and BRIKEN stop
      AIDA on file R5_820

07.45 BigRIPS starts run 1086
      BRIKEN starts run 101
      AIDA on file R5_820

15:51 DAQ continues - AIDA file RIBF148/R5_664
      165Pm BigRIPS setting + 2.8mm Al degrader

      ASIC settings 2018Oct03-13.26.58
       from c. 09.00 13.11.18
       n+n FEE64s Ibias LF feedback 0xb -> 0xd
       HEC fast comparator threshold 0x20 -> 0xff

15:52 Beam out due to power fault somewhere.

15:53 Beam back
      BRIKEN and BigRIPS start
      BRIKEN file 181115_1553_165Pm_085.dlt  
      BigRIPS run 1070
      AIDA on run R5_664

16:00 System wide checks all ok *Except nnaida7 fails adc calibration*
      Leakage currents and bias ok - attachment 1
      FEE Temps ok - attachment 2
      Statistics ok - attachment 3

16:54 BRIKEN and BigRIPS stop
      AIDA on file R5_675

16:55 BRIKEN starts run 181115_1654_165Pm_086.dlt
      BigRIPS starts run 1071
      AIDA on file R5_675

17:30 BRIKEBN and BigRIPS stop for BigRIPS team to get access

13:46 BRIKEN sends sync pulse resetting timestamp
      AIDA on file R5_683

17:49 BRIKEN starts run 181115_1748_165Pm_087.dlt
      bigRIPS starts run 1072
      AIDA on file R5_683

18.00 System wide checks ok, except nnaida7 ADC calibration failure
      FEE64 Temperatures ok (attachment 4)
      Good event statistics ok (attachment 5)
      Detector bias/Leakage currents ok (attachment 6)

18.04 Merger and TapeServer run ok - no error messages in terminals (attachments 7 and 8)

18:48 BigRIPS and BRIKEN stop
      AIDA on file R5_693

18:49 BigRIPS starts run 1073
      BRIKEN starts run 181115_1849_165Pm_088.dlt
      AIDA on file R5_693

19:47 BgiRIPS and BRIKEN stop
      AIDA on file R5_703

19:48 BigRIPS starts run 1074
      BRIKEN starts run 181115_1947_165Pm_089.dlt  
      AIDA on file R5_703

20:54 bigRIPS and BRIKEN stop
      AIDA on file R5_714

20:55 bigRIPS starts run 1075
      BRIKEN starts run 181115_2053_165Pm_090.dlt
      AIDA on file R5_714

21:25 System wide checks all ok *Except nnaida 7 fails adc calibration*
      Bias and leakage currents ok - attachment 9
      FEE Temps all ok - attachment 10
      Statistics ok - attachment 11

21:55 BRIKEN and BigRIPS stop
      AIDA on file R5_724

21:56 BigRIPS starts on run 1076
      BRIKEN starts run
      AIDA on file R5_724

22:55 BigRIPS and BRIKEN stop
      AIDA on file R5_733

22:56 BRIKEN Starts run
      BigRIPS starts run 1077
      AIDA on file R5_733

23.53 Briken stops
      AIDA on file R5_743

23.55 BRIKEN starts
      bigRIPS run 1078
      BRIKEN starts run 93
      AIDA on file R5_743

08.10 BRIKEN stop
      AIDA file RIBF148/R5_587

08.11 BRIKEN start
      AIDA file RIBF148/R5_588
      BRIKEN run 77
      BigRIPS run 1062

08.16 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 1)
      good event statistics ok (attachment 2)
      detector bias/leakage currents ok (attachment 3)
      Merger and TapeServer still ok

09.11 BRIKEN stop
      AIDA file RIBF148/R5_598

09.13 BRIKEN start
      AIDA file RIBF148/R5_598
      BRIKEN run 78
      BigRIPS run 1063

10.10 BRIKEN stop
      AIDA file RIBF148/R5_608

10.12 BRIKEN start
      AIDA file RIBF148/R5_608
      BRIKEN run 79
      BigRIPS run 1064

11.10 BRIKEN stop
      AIDA file RIBF148/R5_618

11.12 BRIKEN start
      AIDA file RIBF148/R5_618
      BRIKEN run 80
      BigRIPS run 1065

11.17 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 4)
      good event statistics ok (attachment 5)
      detector bias/leakage currents ok (attachment 6)
      Merger and TapeServer still ok

12:10 BigRIPS and BRIKEN stop
      AIDA on file R5_628

12:11 BRIKEN start
      AIDA on file R5_628
      BigRIPS run 1066
      BRIKEN run 81 181115_1211_165Pm_081.dlt

13.10 BRIKEN stop
      AIDA file RIBF148/R5_638

13.12 BRIKEN start
      AIDA file RIBF148/R5_638
      BRIKEN run 82
      BigRIPS run 1067

13.32 AIDA file RIBF148/R5_642
      BRIKEN stopped
      Turning beam off to access area

13.50 AIDA file RIBF148/R5_644
      beam back on
      BRIKEN run 83
      BigRIPS run 1068

14.26 MIDASsort analysis file RIBF148/R5_648 - all ADC data synchronised - attachment 7
      analysis of file RIBF148/R5_648 - attachment 8
       nnaida19 dead time ~0.5% - all other deadtimes lower or 0% - no timewarps

14.35 1.8.W spectra layout ID 8 (attachment 9)

14.50 BRIKEN stop
      AIDA file RIBF148/R5_654

14.51 BRIKEN start
      AIDA file RIBF148/R5_654
      BRIKEN run 83
      BigRIPS run 1068

15.10 1.8.H high energy channel spectra (attachment 10)

15.35 beam off
      AIDA file RIBF148/R5_662
      BRIKEN and BigRIPS stopped run           

23.58 DAQ continues ok (RIBF148/R5_505)

00.09 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 1)
      good event statistics ok (attachment 2)
      detector bias/leakage currents ok (attachment 3)

00.13 Merger and TapeServer run ok (attachment 4/5)

00.26 BRIKEN stop
      AIDA file RIBF148/R5_509

00.29 BRIKEN start
      AIDA file RIBF148/R5_510
      BRIKEN run 70
      BigRIPS run 1055

01.46 BRIKEN stop
      AIDA file RIBF148/R5_523

01.49 BRIKEN start
      AIDA file RIBF148/R5_523
      BRIKEN run 71
      BigRIPS run 1056

02.05 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 6)
      good event statistics ok (attachment 7)
      detector bias/leakage currents ok (attachment 8)
      Merger and TapeServer still ok

02.34 XY hit patterns (attachment 9)
      Ex vs Ey plots (attachment 10)
      HEC spectra (attachment 11)
      LEC spectra (attachment 12)

02.49 BRIKEN stop
      AIDA file RIBF148/R5_534

02.50 BRIKEN start
      AIDA file RIBF148/R5_534
      BRIKEN run 72
      BigRIPS run 1057

03.26 zeroed all spectra on online analysis and MIDASsort

04.04 BRIKEN stop
      AIDA file RIBF148/R5_546

04.05 BRIKEN start
      AIDA file RIBF148/R5_546
      BRIKEN run 73
      BigRIPS run 1058

04.10 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 13)
      good event statistics ok (attachment 14)
      detector bias/leakage currents ok (attachment 15)
      Merger and TapeServer still ok

05.06 BRIKEN stop
      AIDA file RIBF/R5_556

05.07 BRIKEN start
      AIDA file RIBF148/R5_557
      BRIKEN run 74
      BigRIPS run 1059

05.08 First 200ms of decay correlations in all detectors
      comparison between different Al degrader thickness values (3mm, 2.3mm, 2.8mm)
      see attachments 16, 17 and 18 - graphs labelled with detector number and Al degrader thickness

06.09 BRIKEN stop
      AIDA file RIBF148/R5_567

06.11 BRIKEN start
      AIDA file RIBF148/R5_567
      BRIKEN run 75
      BigRIPS run 1060

06.16 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 19)
      good event statistics ok (attachment 20)
      detector bias/leakage currents ok (attachment 21)
      Merger and TapeServer still ok

06.17 ASIC check load - ok

06.34 XY hit patterns (attachment 22)
      Ex vs Ey plots (attachment 23)
      HEC spectra (attachment 24)
      LEC spectra (attachment 25)

07:12 BRIKEN stop
      AIDA file RIBF148/R5_578

07:15 BRIKEN start
      AIDA file RIBF148/R5_578
      BRIKEN run 76
      BigRIPS run 1061






      
















      

16.44 DAQ continues OK - AIDA file RIBF148/R5_432
      165Pm BigRIPS setting + 2.8mm Al degrader

      ASIC settings 2018Oct03-13.26.58
       from c. 09.00 13.11.18
       n+n FEE64s Ibias LF feedback 0xb -> 0xd
       HEC fast comparator threshold 0x20 -> 0xff

      BNC PB-4 pulser 
      Amplitude 90,000, x5 attenuator IN
      t_r 50ns tau_d 1ms
      Frequency min
      Delay min
      
16.45 BigRIPS and BRIKEN stop
      AIDA on File R5_432

16.48 BigRIPS starts run 1047
      BRIKEN starts run 62
      AIDA on file R5_433

16.57 online MIDASsort

      m_p versus m_n (LEC) - attachment 1
      x versus y (LEC) - attachment 2
      E_p versus E_n (LEC) - attachment 3
      m_p versus m_n (HEC) - attachment 4
      x versus y (LEC) - attachment 5
      E_p versus E_n (LEC) - attachment 6

      all MIDASsort spectra zero'd

17.17 file RIBF128/R5_436 ADC data synchronised - attachment 7
      analysis of RIBF148/R5_436 - attachment 8
       max dead time nnaida19 ~0.25%

17.48 BigRIPS and BRIKEN stop
      AIDA on File R5_443

17.48 BigRIPS starts run 1048
      BRIKEN starts run 63
      AIDA on file R5_443

18.45 BigRIPS and BRIKEN stop
      AIDA on File R5_452

18.47 BigRIPS starts run 1049
      BRIKEN starts run 64
      AIDA on file R5_453

19.45 BigRIPS and BRIKEN stop
      AIDA on File R5_463

19.46 BigRIPS starts run 1050
      BRIKEN starts run 65
      AIDA on file R5_463

20.49 BigRIPS and BRIKEN stop
      AIDA on File R5_473

20.49 BigRIPS starts run 1051
      BRIKEN starts run 66
      AIDA on file R5_473

21.49 BigRIPS and BRIKEN stop
      AIDA on File R5_483

      ASIC check load

21.50 BigRIPS starts run 1052
      BRIKEN starts run 67
      AIDA on file R5_484

22.00 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 9 & 10

      FEE64 temperatures OK - see attachment 11
      good event statistics OK - see attachments 12

      Merger OK - see attachment 13
      TapeServer OK - see attachment 14
      1x merger error message reported - trying to add items to Q index 12 (Link 12) but queue alreday full

      per FEE64 Rate spectra - attachment 15

      1.8.L spectra - attachments 16 & 17
       nnaida1 pulser peak width 73 ch FWHM
      1.8.H spectra - attachments 18 & 19
      1.8.W spectra 20ms FSR - attachments 20 & 21


22.48 BigRIPS and BRIKEN stop
      AIDA on File R5_493

22.50 BigRIPS starts run 1053
      BRIKEN starts run 68
      AIDA on file R5_493

23.24 BRIKEN DAQ found stopped - no sync check data - BigRIPS DAQ stopped and restarted
      AIDA on File R5_499

23.26 BigRIPS starts run 1054
      BRIKEN starts run 69
      AIDA on file R5_499


      

08:01 BigRips and BRIKEN stop
      AIDA on file R5_346

08:02 BigRIPS starts run 1038
      BRIKEN starts run 181114_0800_165Pm_053.dlt
      AIDA on file R5_346

      System wide checks ok * except nnaida 7 fails adc*
      FEE Temps ok - attachment 1
      Stats ok - attachment 2 
      Leakage currents ok - attachment 3

09:15 BigRIPS and BRIKEN stop
      AIDA on file R5_358

09:16 BigRIPS starts run 1039
      BRIKEN starts run 181114_0915_165Pm_054.dlt
      AIDA on file R5_358

10:15 BigRIPS and BRIKEN stop
      AIDA on file R5_368

10:15 BigRIPS starts run 1040
      BRIKEN starts run 181114_1015_165Pm_055.dlt
      AIDA on file R5_368

10:36 Analyser output of R5_368 - attachment 4

11:15 BugRIPS and BRIKEN stop
      AIDA on File R5_378

11:16 BigRIPS starts run 1041
      BRIKEN starts run
      AIDA on file R5_378



08.03 DAQ continues - AIDA file RIBF148/R5_384
      165Pm BigRIPS setting + 2.8mm Al degrader

      ASIC settings 2018Oct03-13.26.58
       from c. 09.00 13.11.18
       n+n FEE64s Ibias LF feedback 0xb -> 0xd
       HEC fast comparator threshold 0x20 -> 0xff
      
11.50 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 5 & 6

      FEE64 temperatures OK - see attachment 7
      good event & AIDA discriminator statistics OK - see attachments 8

      Merger OK - see attachment 9
      TapeServer OK - see attachment 10
      no errors or warnings shown by server terminal sessions 

      per FEE64 Rate spectra - attachment 11
      per FEE64 HitRate spectraq - attachment 12
      1.8.L spectra - attachments 13-16
        some evidence of pulser peak shifts, notably nnaida5, 11 & 15
        nnaida1 pulser peak width 78 ch FWHM
      1.8.H spectra - attachments 17 & 18
 
      1.8.W spectra 20us FSR - attachments 19 & 23
      1.8.W spectra 200us FSR - attachments 20 & 24
      1.8.W spectra 2ms FSR - attachments 21 & 25
      1.8.W spectra 20ms FSR - attachments 22 & 26

12.15 BugRIPS and BRIKEN stop
      AIDA on File R5_388

12.16 BigRIPS starts run 1042
      BRIKEN starts run 57
      AIDA on file R5_388

12.22 *all* online and MIDASsort spectra zero'd

13:15 BigRIPS and BRIKEN stop
      AIDA on file R5_398

13:16 BigRIPS starts run 1043
      BRIKEN starts run58
      AIDA on file R5_398

13:28 BigRIPS and BRIKEN stop
      AIDA on file
      beam halted to give access to F11 area

13.44 beam started
      BigRIPS and BRIKEN start
      AIDA file RIBF148/R5_402
      BRIKEN run 59
      BigRIPS run 1043

14.45 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_412

14.47 BRIKEN and BigRIPS start
      AIDA file RIBF148/R5_413
      BRIKEN run 60
      BigRIPS run 1044

15.43 BRIKEN and BigRIPS stop
      AIDA file RIBF148/R5_422

      BRIKEN Resets the timestamp

15:44 BRIKEN and BigRIPS start
      AIDA file RIBF148/R5_422
      BRIKEN run 61
      BigRIPS run 1045

16:02 System wide checks all ok *Except nnaida7 fails adc calibration*
      Leakage currents ok - attachment 27
      Stats ok - attachment 28
      FEE Temps ok - attachment 29

16:27 First 200ms of decay correlations in DSSD 3 and 4 for the 3 degrader settings - attachment 30
      DSSD 3 along the top row and DSSD 4 along the bottom.
      Dgrader settings are 3mm, 2.3mm and 2.8mm
      1 hour data in each

00:00 BRIKEN stop AIDA file RIBF148/R5_269 

---------------------------------------------------------------- 

00.02 BRIKEN start 
      BRIKEN file 45 
      BigRIPS file 1030 
      AIDA file RIBF148/R5_270 

00:07 system wide checks ok, except nnaida7 ADC calibration failure 
      FEE64 temperatures ok (attachment 1) 
      good event statistics ok (attachment 2) 
      detector bias/leakage currents ok (attachment 3) 

01:01 BRIKEN stop 
      AIDA file RIBF148/R5_279 

--------------------------------------------------------------- 

01.02 BRIKEN start 
      BRIKEN file 46 
      BigRIPS file 1031 
      AIDA file RIBF148/R5_279 

02:00 BRIKEN stop 
      AIDA file RIBF148/R5_289 

---------------------------------------------------------------- 

02.01 BRIKEN start 
      BRIKEN file 47 
      BigRIPS file 1032 
      AIDA file RIBF148/R5_289 

03:00 BRIKEN stop 
      AIDA file RIBF148/R5_298 

---------------------------------------------------------------- 

03.01 BRIKEN start 
      BRIKEN file 48 
      BigRIPS file 1033 
      AIDA file RIBF148/R5_298 

03:04 system wide checks ok, except nnaida7 ADC calibration failure 
      FEE64 temperatures ok (attachment 4) 
      good event statistics ok (attachment 5) 
      detector bias/leakage currents ok (attachment 6) 

04:00 BRIKEN stop 
      AIDA file RIBF148/R5_308 

----------------------------------------------------------------

04.03 BRIKEN start 
      BRIKEN file 49 
      BigRIPS file 1034 
      AIDA file RIBF148/R5_308 

05:00 BRIKEN stop 
      AIDA file RIBF148/R5_317 

---------------------------------------------------------------- 

05.01 BRIKEN start 
      BRIKEN file 50 
      BigRIPS file 1035 
      AIDA file RIBF148/R5_318 

06:00 BRIKEN stop 
      AIDA file RIBF148/R5_327 

---------------------------------------------------------------- 

06.02 BRIKEN start 
      BRIKEN file 51 
      BigRIPS file 1036
      AIDA file RIBF148/R5_327 

06:07 system wide checks ok, except nnaida7 ADC calibration failure 
      FEE64 temperatures ok (attachment 7) 
      good event statistics ok (attachment 8) 
      detector bias/leakage currents ok (attachment 9)

07:00 BRIKEN stop 
      AIDA file RIBF148/R5_337 

---------------------------------------------------------------- 

07.01 BRIKEN start 
      BRIKEN file 52 
      BigRIPS file 1037
      AIDA file RIBF148/R5_327 

16.36 DAQ continues ok
      AIDA file RIBF148/R5_198
      BRIKEN file 37
      BigRIPS file 1022

16.38 system wide checks ok, except nnaida7 ADC calibration failure

16.40 FEE64 temperatures ok (attachment 1)

16.42 good event statistics ok (attachment 2)

16.43 detector bias/leakage currents ok (attachment 3)

16.44 Merger and TapeServer ok, no error messages in terminals (attachments 4 and 5)

16.51 BRIKEN stop
      AIDA file RIBF148/R5_200

17.00 Al Degrader thickness changed from 2.3mm to 2.8mm
      The 2.3mm plate was previously assumed to be 2.5mm, but this has been corrected by measuring individual Al
      plates with digital micrometer.

17.02 BRIKEN start
      BRIKEN file 38
      BigRIPS file 1023
      AIDA file RIBF148/R5_202

18.01 BRIKEN stop
      AIDA file RIBF148/R5_211

18.03 BRIKEN start
      AIDA file RIBF148/R5_212
      BRIKEN file 39
      BigRIPS file 1024
 
18.08 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 6)
      good event statistics ok (attachment 8)
      detector bias/leakage currents ok (attachment 7)

18.11 Merger and TapeServer ok, no error messages in terminal

19.00 BRIKEN stop
      AIDA file RIBF148/R5_221

19.02 BRIKEN start
      AIDA file RIBF148/R5_221
      BRIKEN file 40
      BigRIPS file 1025

19.57 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 9)
      good event statistics ok (attachment 10)
      detector bias/leakage current ok (attachment 11)

20.01 BRIKEN stop
      AIDA file RIBF148/R5_231

20.03 BRIKEN start
      AIDA file RIBF148/R5_231
      BRIKEN file 41
      BigRIPS file 1026

21.01 BRIKEN stop
      AIDA file RIBF148/R5_240

21.03 BRIKEN start
      AIDA file RIBF148/R5_240
      BRIKEN file 42
      BigRIPS file 1027
      
21:18 system wide checks ok - except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 12)
      good event statistics ok (attachment 13)
      detector bias/leakage current ok (attachment 14)

22:01 BRIKEN stop
      AIDA file RIBF148/R5_250

22:03 BRIKEN start
      AIDA file RIBF148/R5_250
      BRIKEN file 43
      BigRIPS file 1028

22:10 system wide checks ok - except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 15)
      good event statistics ok (attachment 16)
      detector bias/leakage current ok (attachment 17)
      Merger and TapeServer ok, no error messages in terminal

23:01 BRIKEN stop
      AIDA file RIBF148/R5_260

23:03 BRIKEN start
      AIDA file RIBF148/R5_260
      BRIKEN file 44
      BigRIPS file 1029

23.05 system wide checks ok - except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 18)
      good event statistics ok (attachment 20)
      detector bias/leakage current ok (attachment 19)
      Merger and TapeServer ok, no error messages in terminal





      

      
      

10.41 FEE64 ADC data synchronised - attachment 1 

LEC & HEC rates

 *** DSSSD # 1 count:   5472516 old count:   5429034 dt:      1.05 s  LEC rate:  41240.10 Hz
 *** DSSSD # 2 count:   8599335 old count:   8530134 dt:      1.05 s  LEC rate:  65633.05 Hz
 *** DSSSD # 3 count:   1647116 old count:   1632316 dt:      1.05 s  LEC rate:  14036.92 Hz
 *** DSSSD # 4 count:   1825652 old count:   1810910 dt:      1.05 s  LEC rate:  13981.91 Hz
 *** DSSSD # 5 count:    384243 old count:    380911 dt:      1.05 s  LEC rate:   3160.20 Hz
 *** DSSSD # 6 count:   1246549 old count:   1236520 dt:      1.05 s  LEC rate:   9511.91 Hz
 *** DSSSD # 1 count:        31 old count:        30 dt:      1.05 s  HEC rate:      0.95 Hz
 *** DSSSD # 2 count:       258 old count:       255 dt:      1.05 s  HEC rate:      2.85 Hz
 *** DSSSD # 3 count:      1564 old count:      1548 dt:      1.05 s  HEC rate:     15.18 Hz
 *** DSSSD # 4 count:      3547 old count:      3512 dt:      1.05 s  HEC rate:     33.20 Hz
 *** DSSSD # 5 count:       680 old count:       676 dt:      1.05 s  HEC rate:      3.79 Hz
 *** DSSSD # 6 count:     10708 old count:     10629 dt:      1.05 s  HEC rate:     74.93 Hz

Total heavy ion rate c. 130Hz of which c. 50% stop in DSSSDs # 1-6

Attachment 1 - *total* implant energy for AIDA DSSSD stack (5.6MeV/channel)
               ch 1571 ~ 8.8GeV, ch 244 ~ 1.4GeV

Attachment 2 - implant energy for stopping DSSSD layer (20MeV/channel)
               ch 390 ~ 7.8GeV

08.03 DAQ continues - AIDA file RIBF148/R5_117
      165Pm BigRIPS setting + 3mm Al degrader
      
08.10 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event & AIDA discriminator statistics OK - see attachments 4 & 5

      Merger OK - see attachment 6
      TapeServer OK - see attachment 7
      no errors or warnings shown by server terminal sessions 

08.16 analysis of file RIBF148/R5_116 - see attachment 8
      max deadtime nnaida19 ~ 1/420 ~ 0.25%, no timewarps

08.20 BRIKEN stop file
      AIDA file RIBF148/R5_119

08.22 BRIKEN start file
      AIDA file RIBF148/R5_120
      BRIKEN file 28
      BigRIPS file 1013

08.44 MIDASsort online spectra zero'd

08.56 1.8.W spectra 20ms FSR - see attachments 16 & 17
      observe slow transient recovery per 33nF a.c. coupling but 'sawtooth' transients appear to be absent/rare

09.25 BRIKEN stop file
      AIDA file RIBF148/R5_129

09.28 BRIKEN start file
      AIDA file RIBF148/R5_130
      BRIKEN file 29
      BigRIPS file 1014

10.09 per FEE64 hit pattern (rate) - see attachment 9
      per FEE64 1.8.L spectra - see attachments 10-13
       nnaida1 pulser peak width 76 ch FWHM
      per FEE64 1.8.H spectra - see attachments 14 & 15

10.25 BRIKEN stop file
      AIDA file RIBF148/R5_139

10.27 Beam off - enter F11 to change BRIKEN amp gain
      Correlation scaler pulser trigger frequency changed from 100Hz to 10Hz to minimise BigRIPS DAQ deadtime
      Note - we will observe both edges of pulser trigger doubling the apparent frequency and the TDR data format
      analyser reports each 16-bit word of the 48-bit correlation scaler so weill observe 6x frequency or 600Hz
(previously)
      or 60Hz (now). 

10.37 BRIKEN start file
      AIDA file RIBF148/R5_141
      BRIKEN file 30
      BigRIPS file 1015 

10.25 BRIKEN stop file
      AIDA file RIBF148/R5_144

      BRIKEN reloading DAQ configuration, will send correlation scaler reset

10.56 BRIKEN start file
      AIDA file RIBF148/R5_145
      BRIKEN file 31
      BigRIPS file 1016

      BRIKEN reload DAQ configuration again

11.00 BRIKEN stop file
      AIDA file RIBF148/R5_145

11.06 BRIKEN start file
      AIDA file RIBF148/R5_145
      BRIKEN file 32
      BigRIPS file 1017

11.50 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 18)
      good event statistics ok (attachment 19)
      detector bias/leakage currents ok (attachment 20)

12.05 BRIKEN stop file
      AIDA file RIBF148/R5_155

12.07 BRIKEN start file
      BRIKEN file 33
      BigRIPS file 1018
      AIDA file RIBF148/R5_155

13.06 BRIKEN stop file
      AIDA file RIBF148/R5_165

13.08 BRIKEN start file
      BRIKEN file 34
      BigRIPS file 1019
      AIDA file RIBF148/R5_165

13.35 BRIKEN stop file
      AIDA file RIBF148/R5_169

BighRIPS DAQ reset required

13.38 BRIKEN start file
      BRIKEN file 35
      BigRIPS file 1020
      AIDA file RIBF148/R5_170

14.39 BRIKEN stop file
      AIDA file RIBF148/R5_179

14.40 BRIKEN start file
      BRIKEN file 36
      BigRIPS file 1021
      AIDA file RIBF148/R5_179

15.38 BRIKEN stop file
      AIDA file RIBF148/R5_189

15.49 System wide checks ok - except nnaida7 ADC calibration failure
      FEE64 temperatures ok - attachment 21
      good event statistics ok - attachment 22
      detector bias/leakage currents ok - attachment 23

15.51 BRIKEN start file
      BRIKEN file 37
      BigRIPS file 1022
      AIDA file RIBF148/R5_191

      

00:00 AIDA currently on file R5_38
      BRIKEN on file 181112_2321_165Pm_019.dlt (AIDA file at start R5_33)
      BigRIPS run 1004



00:23 BRIKEN stop file
      AIDA Currently on file R5_43
      
00:26 BRIKEN start 181113_0025_165Pm_020.dlt 
      BigRIIPS start 1005
      AIDA Currently on file R5_43

     System wide checks ok

01:13 Bias and leakage currents ok - attchment 1
      Stats ok - attachment 2
      FEE Temps ok - attachment 3

01:21 BigRIPS and BRIKEN stop
      AIDA on file R5_52

01:25 BigRIPS starts run 1006
      BRIKEN starts run 181113_0123_165Pm_021.dlt
      AIDA on file R5_53

02:21 BigRIPS and BRIKEN stop
      AIDA on file R5_62

02:23 BigRIPS starts run 1007
      BRIKEN starts run 181113_0222_165Pm_022.dlt
      AIDA on file R5_62

      ASIC load check ok

03:15 Beam dropped out unsure for how long but is now back

03:21 BigRIPS and BRIKEN stopped
      AiDA on file R5_71
      
03:23 BigRIPS starts run 1008
      BRIKEN starts run 181113_0320_165Pm_023.dlt
      AIDA on file R5_71

03:45 Output of analyser on R5_70 - attachment 4

03:59 System wide checks ok
      FEE Temps ok - attachment 5
      Statistics ok - attachment 6


04:21 BigRIPS and BRIKEN stop
      AIDA on file R5_81

04:23 BigRIPS starts run 1009
      BRIKEN starts run 181113_0421_165Pm_024.dlt
      AIdA on file R5_81

05:19 BigRIPS and BRIKEN stop
      AIDA on file R5_90

05:20 BigRIPS start run 1010
      BRIKEN starts run 181113_0520_165Pm_025.dlt
      AIDA on file R5_90

05:49 System wide checks all ok
      Stats ok - attachment 7
      FEE Temps ok - attchment 8
      Bias and leakage currents ok - attachment 9

      High energy hit pattern per dssd - attachment 10
      Low energy Ex vs Ey plot per dssd - attachment 11
      High energy Ex vs Ey plot per dssd - attachment 12
      Also using the previously merged files produced from Phong's sort have confirmed that there is no to
      little punch through on DSSD3
      Did this through the use of a 2d plot of energy DSSD 3 vs the velocity

06:21 BigRIPS and BRIKEN stop
      AIDA on file R5_100

06:23 BigRIPS starts run 1011
      BRIKEN starts run 181113_0622_165Pm_026.dlt
      AIDA on file R5_100

07:19 BigRIPS and BRIKEN stop
      AIDA on file R5_110

07:20 BigRIPS starts run 1012
      BRIKEN starts run
      AIDA on file R5_110 

17:59 DAQ continues OK
      Stats OK - attachment 1
      FEE temperatures OK - attachment 2
      Bias and leakage currents OK - attachment 3
      System-wide checks OK *except* nnaida7 fails ADC calibration


19:07 DAQ continues OK
      Stats OK - attachment 4
      FEE temperatures OK - attachment 5
      Bias and leakage currents OK - attachment 6
      System-wide checks OK *except* nnaida7 fails ADC calibration

20.19 DAQ starts
      AIDA file RIBF148/R5_4
      BRIKEN file 16
      BigRIPS 1001

      165Pm setting + 3mm Al degrader

20.21 all online & MIDASsort histograms zero'd

20.23 FEE64 good event statistics - see attachment 7
      Merger - see attachment 8
      TapeServer - see attachment 9

      HEC x versus y spectra - see attachment 10
       SN thinks DSSSD #3 are the ions of interest, #4 are the ions of interest at different charge state
       and #5 & #6 are lighter ions which do not stop in DSSSD #1-6

21.21 DAQ stops 

      DAQ starts
      AIDA file RIBF148/R5_14
      BRIKEN file 18
      BigRIPS 1003

21.26 HEC x vs y multiplicity spectra - attachment 11

21.29 HEC Ex vs Ey spectra - attachment 12
      FEE64 rate spectra - attachment 13

21.31 1.8.L front/rear energy spectra (attachments 14/15) LEC

21.33 1.8.H front/rear energy spectra (attachments 16/17) HEC

21.46 system wide checks ok, except nnaida7 ADC calibration failure
      FEE64 good event statistics ok (attachment 18)
      FEE64 temperatures ok (attachment 19)
      Leakage currents/detector bias ok (attachment 20)

21.49 Merger and TapeServer ok, no error messages in terminal
      DAQ still running (RIBF148/R5_18)

22.10 attachment 21 - pulser spectra in all channels fired at same time
                    - FEE64 in sync

22.12 SYNC100 at 9153.8 Hz
      FEE64 discriminator at ~15000 Hz - higher than expected
      ~1 second deadtime in FEE19 - due to nnaida12 running fast
      no timewarps observed in FEE64
      all of above in attachment 22
   
22:32 DAQ continues OK
      Stats OK - attachment 24
      FEE temperatures OK - attachment 23
      Bias and leakage currents OK - attachment 25
      System-wide checks OK *except* nnaida7 fails ADC calibration   

23:30 DAQ continues OK
      Stats OK - attachment 26
      FEE temperatures OK - attachment 27
      Bias and leakage currents OK - attachment 28
      System-wide checks OK *except* nnaida7 fails ADC calibration 
      

06:35 DAQ Continues ok
      Stats ok - attachment 1
      FEE Temps ok - attachment 2
      Bias and leakage currents ok - attachment 3
      System wide checks all ok
      Chiller refilled

07:57 DAQ continues OK
      Stats OK - attachment 4
      FEE temperatures OK - attachment 5
      Bias and leakage currents OK - attachment 6
      System-wide checks OK *except* nnaida7 fails ADC calibration

10:06 DAQ continues OK
      Stats OK - attachment 7
      FEE temperatures OK - attachment 8
      Bias and leakage currents OK - attachment 9
      System-wide checks OK *except* nnaida7 fails ADC calibration
      Workstation occasionally feels sluggish. See iostat 5 (attach 10) & top -a (attach 11)

12:08 DAQ continues OK
      Stats OK - attachment 12
      FEE temperatures OK - attachment 13
      Bias and leakage currents OK - attachment 14
      System-wide checks OK *except* nnaida7 fails ADC calibration
      

15:40 DAQ continues OK
      Stats OK - attachment 15
      FEE temperatures OK - attachment 16
      Bias and leakage currents OK - attachment 17
      System-wide checks OK *except* nnaida7 fails ADC calibration


16:58 DAQ continues OK
      Stats OK - attachment 18
      FEE temperatures OK - attachment 19
      Bias and leakage currents OK - attachment 20
      System-wide checks OK *except* nnaida7 fails ADC calibration

06.53 DAQ continues OK - data transfer disabled

06.55 all system wide checks OK *except* nnaida7 fails ADC calibration
      detector biases & leakage currents OK - see attachments 1 & 2
      Julabo FL11006 chiller set point +20 deg C actual +20 deg C, water level c. 75% (L-H)
      ambient tempature + 26.9 deg C, RH 21.6%, d.p. +2.9 deg C

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4

      per FEE64 rate spectra - see attachment 5
      ASIC check load
      per FEE64 rate spectra - see attachment 6
      good event statistics OK - see attachment 7

      1.8.L spectra - see attachments 8 & 9
       nnaida1 pulser peak width 72 ch FWHM

      1.8.W spectra 20us FSR - see attachments 10 & 14
      1.8.W spectra 200us FSR - see attachments 11 & 15
      1.8.W spectra 2ms FSR - see attachments 12 & 16
      1.8.W spectra 20ms FSR - see attachments 13 & 17
      Note - LED threshold 9000 for *all* FEE64s

07.27 statistics zero'd
      some 32bit counters (e.g. nnaida19 & nnaida20) had overflowed/wrapped around

18:19 Computer appears to be running slow though cannot see a reason why.
      No programs using to much ram or cpu
      FEE temp ok - attachment 18
      bias and leakage currents ok - attachment 19
      System wide checks ok

21:02 System wide checks ok
      DAQ Continues ok - data transfer disabled.
      Bias and leakage currents ok - attachment 20
      FEE Temperatures ok - attachment 21

Some less commonly recorded AIDA control tabs whilst DAQ going (data transfer disabled)

12.35 DAQ continues OK - data transfer disabled

12.37 all system wide checks OK *except* nnaida7 fails ADC calibration
      detector biases & leakage currents OK - see attachments 1 & 2
      Julabo FL11006 chiller set point +20 deg C actual +20 deg C, water level topped up c. 1 litre - 80% (L-H)
      ambient tempature + 27.3 deg C, RH 33.0%, d.p. +9.6 deg C

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4

      per FEE64 rate spectra - see attachment 5

      1.8.L spectra - see attachments 6 & 7
       nnaida1 pulser peak width 71 ch FWHM

      1.8.W spectra 20us FSR - see attachments 8 & 9

Offline analysis of Oct18/R18_0 to 2, R27_0, 4 & 9, R29_0, 7 & 30

alpha background, BNC PB-4 pulser OFF, LEC/MEC slow comparator 0x64 (~1MeV)

*** ENTRY finish

 *** data items: 2043072278 ( 246610.11 Hz)
 *** ADC events:   10666744 (   1287.53 Hz)
 *** time warps:          2 (      0.00 Hz)
 *** DSSSD # 1 count:      1446 old count:      1446 dt: 231900.06 s  LEC rate:      0.01 Hz
 *** DSSSD # 2 count:       568 old count:       568 dt: 231900.06 s  LEC rate:      0.00 Hz
 *** DSSSD # 3 count:       644 old count:       644 dt: 231900.06 s  LEC rate:      0.00 Hz
 *** DSSSD # 4 count:       612 old count:       612 dt: 231900.06 s  LEC rate:      0.00 Hz
 *** DSSSD # 5 count:       591 old count:       591 dt: 231900.06 s  LEC rate:      0.00 Hz
 *** DSSSD # 6 count:       796 old count:       796 dt: 231900.06 s  LEC rate:      0.00 Hz
 *** DSSSD # 1 count:         6 old count:         6 dt: 231900.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         3 old count:         3 dt: 231900.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt: 231900.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         1 old count:         1 dt: 231900.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt: 231900.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         1 old count:         1 dt: 231900.06 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

attachment 1 - per DSSSD m_p versus m_n
           2 - per DSSSD x versus y
           3 - per DSSSD E_p versus E_n
           4 - DSSSD channel versus E_p
           5 - DSSSD channel versus E_p (expanded)
           6 - hit pattern (ASIC & DSSSD order)
           7 - titles
           8 - variables 
               N.B. ADC offsets not set, 0 by default
                    | E_p - E_n | < 2000


DSSSD configuration looks OK. Conclude problems identified and addressed November 5 are confirmed
as fixed - see https://elog.ph.ed.ac.uk/AIDA/766 and https://elog.ph.ed.ac.uk/AIDA/761

08:36 DAQ still running
      Not writing data to disk

      Bias and leakage currents ok - attachment 1
      System wide checks all ok
      FEE Temperatures ok - attachment 2
      Statistics - attachment 3
      Check ASIC Control done

08:56 Pulser peaks are ok and similar to what has been observed over the past two weeks
      Layout 4 and 5 - attachments 4 and 5

11.55 Lost connection to FEE64 1-16 - fuse blown
      stopped DAQ
      switched all FEE64 off
      Replaced 20A fuse
      switched FEE64 back on individually
      system wide checks ok, except nnaida7 failure in ADC calibration
      DAQ start (not writing to file)
      FEE64 temperatures ok (attachment 6)
      Bias/Leakage currents ok (attachment 7)
      good event statistics ok (attachment 8)

17.08 all system wide checks OK *except* nnaida7 fails ADC calibration
      detector biases & leakage currents OK - see attachments 9 & 10

      FEE64 temperatures OK - see attachment 11
      good event statistics OK - see attachment 12

      per FEE64 rate spectra - see attcahment 13

      1.8.L spectra - see attachments 14 & 15
       nnaida1 pulser peak width 72 ch FWHM

      1.8.W spectra 20us FSR - see attachments 16 & 20
      1.8.W spectra 200us FSR - see attachments 17 & 21
      1.8.W spectra 2ms FSR - see attachments 18 & 22
      1.8.W spectra 20ms FSR - see attachments 19 & 23

09.57 DAQ still running (R29_29)
      System wide checks ok, except nnaida7 ADC calibration failure
      
09.59 FEE64 temperatures ok (attachment 1)
      TapeServer ok
      Link16 error reported in Merger (attachment 2)

10.04 Bias/Leakage currents ok (attachment 3)

10.07 Good event statistics ok, except nnaida17, 18, 22 which appears to intermittently run fast overnight, and
      nnaida2 which runs fast due to hot channel (attachment 4)

10.11 1.8.W spectrum (attachment 5)

10.56 2.15.H spectra - show hot high energy channel in nnaida2 (attachment 6)

11.09 attachments 7,8,9 - High energy channels spectra, show hot channel in nnaida17 

11.45 Stats - Attachment 10 


15.07 analysis RIBF/R1_1 - see attachment 11
      <1% deadtime for high rate FEE64s nnaida19 & nnaida20

15.14 AIDA shield (c. 3" Pb) in position between F11 and upstream BRIKEN (CH2)n shield - checked by TD & GK
      Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C, water added to 80% level (L-H) or 2/3 (M-H) 

16:41 DAQ stopped
      slow comparator threshold at 10
      DAQ restarted (\RIBF148\R2)
      DAQ stopped (\RIBF148\R2_3)
      slow comparator threshold raised back to 100
      DAQ start (\RIBF148\R3_0)
17.10 DAQ stop (\RIBF148\R3_0)
      slow comparator threshold lowered back to 10
      DAQ start (not writing to file)
      good event statistics ok (attachment 12)

17.15 system wide checks ok
      FEE64 temperatures ok (attachment 13)
      bias/leakage currents ok (attachment 14)

18:35 R4_0 started for background measurement for Phong.
      R4_0 should be discarded as FEE1 was running fast at start. recovered with ASIC check

18:51 R1_2 stopped

10.02 DAQ still running, on file Oct18/R27_9
      Merger and TapeServer ok, no error warnings in terminals

10.07 Good event statistics ok, except nnaida6 rate being high (attachment 1)
      nnaida17 rate ok, but counts very high. May have run fast at some point overnight.
      System wide checks ok, except nnaida7 failure in ADC calibration
      FEE64 temperatures ok (attachment 2)

10.13 Bias/leakage currents slightly higher, but ok (attachment 3)

10:30 1.8.W spectra (attachment 4)

11.10 Stopped the DAQ (R27_9)
      Checked ASIC control - ok
      Started the DAQ again (Oct18/R28_0)
      good event statistics ok, aside from nnaida6 running slightly fast (attachment 5)

15.07 DAQ stop - file Oct18/R28_2

      Detector bias OFF 

      Move AIDA downstream to check position of Clover G7 

16.05 Move back upstream into BRIKEN (CH2)n moderator assembly

      Detector bias ON

16.12 all system wide checks OK *except* nnaida7 fails ADC calibration
      sync all ASIC clocks using ReSYNC
      detector biases & leakage currents OK - see attachments 6 & 7
      FEE64 temperatures OK - see attachment 8
      good event statistics OK *except* nnaida2 - see attachment 9
                                                  see attachment 10 for comparison to statistics 5.1.18

16.41 1.8.W spectra 20us FSR - see attachments 11 & 12

16.55 slow comparator thresholds raised from 10 to 100
      DAQ start (Oct18/R29_0)
      Merger and TapeServer ok - no error warnings in terminals
      good event statistics ok, except nnaida6 running fast (attachment 13)




      

09:13 DAQ still running R18_1
      Merger and TapeServer OK
      System wide checks ok, except for nnaida7 ADC calibration failure
      Temperature OK (attachment 1)
      Bias and leakage current OK (attachment 2)
      Good event statistics OK (attachment 3)
      
11.20 1.8.W spectra - attachment 4 & 5

      analysis file Oct18/R18_1 - attachment 6


15:35 Inserted AIDA snout in BRIKEN. Lowered threshold to 100 keV. Rate looks OK.
      R19 pulser walkthrough 90 0000 ... 10 0000 (10 000 steps) - attach 7&8
      R21 pulser walkthrough 12 000 ... 2 000 (2 000 steps)
      Pulser back to 90 000. Frequency set to zero.
      R22 background run starts. 
      Rates OK (attach 9)

16.07 Raised slow comparator threshold to 100 from 10
      DAQ start (file R23)
      Merger and TapeServer ok, no error messages in terminal
      Good event statistics ok (attachment 10)
      System wide checks ok, except nnaida7 failing ADC calibration 
      FEE64 temperatures ok (attachment 11)
      bias/leakage currents ok (attachment 12)

16.58 Repeat pulser walkthroughs with additional ASIC check loads

      R25 pulser walkthrough 90 0000 ... 10 0000 (10 000 steps) - attach 7&8
      R26 pulser walkthrough 12 000 ... 2 000 (2 000 steps)


18.26 DAQ start - file Oct18/R27
      alpha background
      LEC/MEC slow comparator 0xa -> 0x64
      BNC PB-4 pulser OFF @ 18.29!

18.34 1.8.W spectra 20us FSR - see attachments 13 & 14

Offline analysis of Oct18/R16_0 to 11


BNC PB-4 pulser OFF, LEC/MEC slow comparator 0x64 (~1MeV)
background (presumably high energy, low Z particles) from beam stopping in F11 E detector upstream 
of AIDA and BRIKEN - ~10-15cm Pb shielding installed in BRIKEN to stop heavy opns reaching AIDA

*** ENTRY finish

 *** data items: ********** ( -13850.89 Hz)
 *** ADC events: 2089104652 (  24903.76 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:     81173 old count:     81171 dt: 106837.14 s  LEC rate:      0.76 Hz
 *** DSSSD # 2 count:     73671 old count:     73668 dt: 106837.14 s  LEC rate:      0.69 Hz
 *** DSSSD # 3 count:     74114 old count:     74109 dt: 106837.14 s  LEC rate:      0.69 Hz
 *** DSSSD # 4 count:     73324 old count:     73320 dt: 106837.14 s  LEC rate:      0.69 Hz
 *** DSSSD # 5 count:     74312 old count:     74308 dt: 106837.14 s  LEC rate:      0.70 Hz
 *** DSSSD # 6 count:     74653 old count:     74649 dt: 106837.14 s  LEC rate:      0.70 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt: 106837.14 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt: 106837.14 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt: 106837.14 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt: 106837.14 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt: 106837.14 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt: 106837.14 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends


attachment 1 - per DSSSD m_p versus m_n
           2 - per DSSSD x versus y
           3 - per DSSSD E_p versus E_n
           4 - DSSSD hit pattern (ASIC & DSSSD order) expanded view of LEC events

DSSSD configuration looks OK. With improved statistics (cf alpha background) some missing strips identifiable
- see also Elog https://elog.ph.ed.ac.uk/AIDA/764

10.40 Lowered slow comparator threshold from 100 to 10
      Good event statistics ok (attachment 1)
      System wide checks ok, except for nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 2)
      Bias/Leakage currents ok (attachment 3)
      1.0.L spectra obtained, look ok (attachment 4)
      DAQ stopped (R16)
 
10.49 Slow comparator threshold raised from 10 to 100
      DAQ restarted (R17)
      Merger and TapeServer ok, no error messages in terminals
      Good event statistics ok (attachment 5)
      nnaida2 is now at a good rate, after fixing kapton connection.

15:09 DAQ still running (Oct18/R17_0)
      Merger and TapeServer ok
      System wide checks ok, except for nnaida7 ADC calibration failure
      FEE64 temperatures ok (attachment 6)
      Bias/Leakage currents ok (attachment 7)
      Good event statistics ok (attachment 8)


18.48 good event statistics OK *except* nnaida17 c. 400k
      ASIC Control -> Check ASIC Control
      *all* FEE64 good events statistics now OK
      DAQ stop - current file Oct18/R17_20

18.50 DAQ start - file Oct18/R18
      BNC PB-4 OFF
      LEC/MEC slow comparator 0x64

      alpha background run

18.54 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 9 & 10
      FEE64 temperatures OK - see attachment 11
      good event statistics OK - see attachment 12
      Merger - Link16 errors reported - see attachment 13
      TapeServer OK - see attachment 14

      1.8.W spectra - attachment 15 & 16


      

Offline analysis of Oct18/R4_0 to _2

alpha background and pulser

Attachments 1-24 - per FEE64 ADC spectra (32k->4k)

Attachments 25-26 - expanded view pulser peaks FEE64 #2 & #17 & #24
                    anomalously small pulser peak widths observed -> possible LH Kapton PCB issue

Attachements 27-28 - sort program (pulser.f) and variables (variables.dat)

10.03 DAQ continues OK - current file Oct18/R16_9
      FEE64 LEC/MEC slow comparator threshold 0x64
      beam background

10.05 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK *except* nnaida2 - see attachment 4
      nnaida2 rate due to one hot channel as before

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

  
      1.8.L spectra - see attachments 7 & 8

       N.B. evidence of minimally ionising particles (presumably protons) from beam to F11 E detector
            ~10-15cm Pb bricks were placed within BRIKEN (CH2)n stack to stop heavy particles

      1.8.W spectra 20us FSR - see attachments 9 & 10

      online analysis with MIDASsort

      attachment 11 - per DSSSD m_p versus m_n
                 12 - per DSSSD x versus y
                 13 - per DSSSD E_p versus E_n
                 14 - channel versus E_p
                 15 - hit pattern (ASIC & DSSSD order)

14.35 DAQ continues OK - current file Oct18/R16_11
      FEE64 LEC/MEC slow comparator threshold 0x64
      beam background

14.35 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 15 & 16

      FEE64 temperatures OK - see attachment 17
      good event statistics OK *except* nnaida2 - see attachment 18
      nnaida2 rate due to one hot channel as before

14.51 analysis file Oct18/R16_10 - attachment 19

Offline analysis of Oct18/R15_0 to 7


BNC PB-4 pulser OFF, LEC/MEC slow comparator 0x64 (~1MeV)
background (presumably high energy, low Z particles) from beam stopping in F11 E detector upstream 
of AIDA and BRIKEN - ~10-15cm Pb shielding installed in BRIKEN to stop heavy opns reaching AIDA

 *** ENTRY finish

 *** data items: 2088704000 (  42315.52 Hz)
 *** ADC events: 1236420713 (  25048.92 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:     12557 old count:     12557 dt:  63395.57 s  LEC rate:      0.20 Hz
 *** DSSSD # 2 count:     10332 old count:     10332 dt:  63395.57 s  LEC rate:      0.16 Hz
 *** DSSSD # 3 count:      9644 old count:      9644 dt:  63395.57 s  LEC rate:      0.15 Hz
 *** DSSSD # 4 count:     10024 old count:     10024 dt:  63395.57 s  LEC rate:      0.16 Hz
 *** DSSSD # 5 count:     11035 old count:     11035 dt:  63395.57 s  LEC rate:      0.17 Hz
 *** DSSSD # 6 count:     11684 old count:     11684 dt:  63395.57 s  LEC rate:      0.18 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:  63395.57 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt:  63395.57 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:  63395.57 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:  63395.57 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:  63395.57 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt:  63395.57 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

attachment 1 - per DSSSD m_p versus m_n
           2 - per DSSSD x versus y
           3 - per DSSSD E_p versus E_n
           4 - DSSSD hit pattern (ASIC & DSSSD order) LEC & HEC events (note HEC events from ASIC check loads)
           5 - DSSSD hit pattern (ASIC & DSSSD order) expanded view of LEC events

DSSSD configuration looks OK. With improved statistics (cf alpha background) some missing
strips identifiable.

09.37 DAQ continues OK - data transfer disabled
      FEE64 LEC/MEC slow comparator threshold 0xa

09.39 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK *except* nnaida17 c. 400k - see attachment 4
      nnaida2 rate due to one hot channel as before
  
      1.8.L spectra - see attachments 5 & 6

       N.B. evidence of minimally ionising particles (presumably protons) from beam to F11 E detector
            ~10-15cm Pb bricks were placed within BRIKEN (CH2)n stack to stop heavy particles

      1.8.W spectra 20us FSR - see attachments 7 & 8


10.10 LEC/MEC slow comparator from 0xa to 0x64
      3x ASIC check load
      DAQ stop
      all histograms zero'd
      enable data transfer
      DAQ start - file Oct18/R16

      beam background

      good event statistics OK *except* nnaida2 20kHz - see attachment 9

If you obtain the 'unable to connect' from one, or more, of the FEE64s try the
following procedures *before* power-cycling/rebooting all of the FEE64s:

1) 'unable to connect' whilst DAQ is going using the Merger
   
   https://elog.ph.ed.ac.uk/AIDA/303

2) determine whether multiple FEE64s are unable to connect

aidas1> ping nnaida1
PING nnaida1 (10.1.1.1) 56(84) bytes of data.
64 bytes from nnaida1 (10.1.1.1): icmp_seq=1 ttl=64 time=2.81 ms
64 bytes from nnaida1 (10.1.1.1): icmp_seq=2 ttl=64 time=2.81 ms
64 bytes from nnaida1 (10.1.1.1): icmp_seq=3 ttl=64 time=2.80 ms
^C
--- nnaida1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2029ms
rtt min/avg/max/mdev = 2.807/2.812/2.817/0.061 ms
aidas1> ping nnaida2
PING nnaida2 (10.1.1.2) 56(84) bytes of data.
64 bytes from nnaida2 (10.1.1.2): icmp_seq=1 ttl=64 time=2.87 ms
64 bytes from nnaida2 (10.1.1.2): icmp_seq=2 ttl=64 time=2.81 ms
64 bytes from nnaida2 (10.1.1.2): icmp_seq=3 ttl=64 time=2.83 ms
64 bytes from nnaida2 (10.1.1.2): icmp_seq=4 ttl=64 time=2.81 ms
^C
--- nnaida2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3350ms
rtt min/avg/max/mdev = 2.810/2.833/2.874/0.069 ms

  :
  :
   
  etc

If you find that you are unable to ping a group (or groups) of 8x FEE64s
it is probable that the issue is a fuse failure(s) in the USB-controlled
ac mains relay. It will be necessary to replace the fuse(s) and perform a
cold start of the FEE64s

 https://elog.ph.ed.ac.uk/AIDA/418

3) If you are able to ping all FEE64s telnet to the FEE64 you are unable to
connect to, login as root, and issue a reboot command

aidas1> telnet nnaida2
Trying 10.1.1.2...
Connected to nnaida2.
Escape character is '^]'.

Linux 2.6.31 (localhost) (08:23 on Thursday, 01 November 2018)

login: root
Password: 
Last login: Mon May 23 16:02:30 from myserver
-bash-3.2# ls
a.out  ld_aidamem.csh  xaida
-bash-3.2# ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 Oct28 ?        00:00:07 init [3]  
root         2     0  0 Oct28 ?        00:00:00 [kthreadd]
root         3     2  0 Oct28 ?        00:00:00 [ksoftirqd/0]
root         4     2  0 Oct28 ?        00:00:00 [watchdog/0]
root         5     2  0 Oct28 ?        00:00:00 [events/0]
root         6     2  0 Oct28 ?        00:00:00 [khelper]
root         7     2  0 Oct28 ?        00:00:00 [async/mgr]
root         8     2  0 Oct28 ?        00:00:00 [kblockd/0]
root         9     2  0 Oct28 ?        00:00:00 [kseriod]
root        10     2  0 Oct28 ?        00:00:00 [khungtaskd]
root        11     2  0 Oct28 ?        00:00:00 [pdflush]
root        12     2  0 Oct28 ?        00:00:00 [pdflush]
root        13     2  0 Oct28 ?        00:00:00 [kswapd0]
root        14     2  0 Oct28 ?        00:00:00 [aio/0]
root        15     2  0 Oct28 ?        00:00:00 [nfsiod]
root        20     2  0 Oct28 ?        00:00:00 [81400400.hd-xps]
root        21     2  0 Oct28 ?        00:00:00 [81400000.xps-sp]
root        22     2  0 Oct28 ?        00:00:00 [kpsmoused]
root        25     2  0 Oct28 ?        00:00:00 [rpciod/0]
root        54     1  0 Oct28 ?        00:00:00 /sbin/udevd -d
root       226     1  0 Oct28 ?        00:00:00 syslogd -m 0
root       229     1  0 Oct28 ?        00:00:00 klogd -x
root       259     1  0 Oct28 ?        00:00:00 rpcbind
root       275     1  0 Oct28 ?        00:00:00 xinetd -stayalive -pidfile /var/
root       377     1 98 Oct28 ?        3-22:18:16 ./AidaExecV8
root       392     1  0 Oct28 ttyS0    00:00:00 /sbin/mingetty --noclear console
root       404   275  0 08:23 ?        00:00:00 in.telnetd: myserver
root       405   404  0 08:23 ?        00:00:00 login -- root            
root       406   405  1 08:23 ttyp0    00:00:00 -bash
root       427   406  6 08:23 ttyp0    00:00:00 ps -ef
-bash-3.2# reboot

Broadcast message from root (ttyp0) (Thu Nov  1 08:25:20 2018):

The system is going down for reboot NOW!
-bash-3.2# Connection closed by foreign host.

Wait 5 minutes for the filesystem to be mounted and the FEE64 boot sequence
to complete. 

Switch to Desktop 1 and re-select 'Data Acquisition Run Control' tab and select 
Update. The status of the FEE64 you were unable to connect to should now 'undefined'.

Follow cold start sequence steps 7-10 and 15

 https://elog.ph.ed.ac.uk/AIDA/418

 
Offline analysis of Oct18/R9_0 to 17

alpha background, BNC PB-4 pulser OFF, LEC/MEC slow comparator 0x64 (~1MeV)

*** ENTRY finish

 *** data items:  404616704 (  10823.34 Hz)
 *** ADC events: ********** ( -30856.57 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:      1004 old count:      1004 dt: 160265.10 s  LEC rate:      0.01 Hz
 *** DSSSD # 2 count:       423 old count:       423 dt: 160265.10 s  LEC rate:      0.00 Hz
 *** DSSSD # 3 count:       364 old count:       364 dt: 160265.10 s  LEC rate:      0.00 Hz
 *** DSSSD # 4 count:       363 old count:       363 dt: 160265.10 s  LEC rate:      0.00 Hz
 *** DSSSD # 5 count:       455 old count:       455 dt: 160265.10 s  LEC rate:      0.00 Hz
 *** DSSSD # 6 count:       590 old count:       590 dt: 160265.10 s  LEC rate:      0.00 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt: 160265.10 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt: 160265.10 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt: 160265.10 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt: 160265.10 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt: 160265.10 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt: 160265.10 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

attachment 1 - per DSSSD m_p versus m_n
           2 - per DSSSD x versus y
           3 - per DSSSD E_p versus E_n
           4 - DSSSD channel versus E_p

           5 - implantdecay4.f
           6 - titles
           7 - variables 
               N.B. ADC offsets not set, 0 by default
                    | E_p - E_n | < 2000


DSSSD configuration looks OK. No obvious issues with missing ASICs  

09.58 DAQ continues OK - current file Oct18/R15_6
      alpha background run

09.20 all system wide checks OK *except*
        nnaida7 fails ADC calibration
        SYNC errors since baseline - see attachment 1 - baseline not zero'd following reboot of nnaida2 and
setup of all FEE64s yesterday
        SYNC errors OK following new baseline check

      detector biases & leakage currents OK - see attachments 2 & 3

      FEE64 temperatures OK - see attachment 4
      good event statistics OK - see attachment 5
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 6
      TapeServer OK - see attachment 7
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 8 & 9

       N.B. evidence of minimally ionising particles (presumably protons) from beam to F11 E detector
            ~10-15cm Pb bricks were placed within BRIKEN (CH2)n stack to stop heavy particles

      1.8.W spectra - see attachments 10 & 11 - trace updates for 9/12 p+n FEE64s have stopped, n+n FEE64s OK

15.54 DAQ continues - current file Oct18/R15_15
      nnaida17 good event rate c. 400kHz


15.57 FEE64 reset, setup, system wide checks
      all ASIC clocks sync'd using ReSYNC
      all spectra zero'd
      ASIC check load
      
      DAQ go - data transfer disabled

      good events statistics - attachment 12

      1.8.W spectra - see attachments 13 & 14
      changed LED threshold 7700 -> 8500 for 9/12 p+n FEE64s

09.24 DAQ continues OK - current file Oct18/R12_116
      alpha background run

09.20 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK *except* nnaida17 c. 400k - see attachment 4
      nnaida2 rate due to one hot channel as before

      Merger - Link16 errors reported - see attachment 5
      TapeServer OK - see attachment 6

      problem with nnaida17 rate resolved with ASIC check load - see attachment 7
  
      1.8.L spectra - see attachments 7 & 8

       N.B. evidence of minimally ionising particles (presumably protons) from beam to F11 E detector
            ~10-15cm Pb bricks were placed within BRIKEN (CH2)n stack to stop heavy particles

      1.8.W spectra 20us FSR - see attachments 9 & 10

09.33 DAQ stop - file Oct18/R12_117
      All Oct18/R12_* files deleted

09.34 all spectra zero'd
      DAQ start - file Oct18/R13
      alpha background run

      all FEE64 good events statistics OK - see attachment 11

15.11 DAQ continues ok, on file Oct18/R13_2 (alpha run)
      system wide checks ok, except nnaida7 failing ADC calibration
      FEE64 temperatures ok (attachment 13)
      detector bias and leakage currents ok (attachment 14)
      good event statistics ok, except nnaida2 due to one hot channel (attachment 15)
      Merger and TapeServer ok, no errors in terminal

15.20 DAQ stop - file Oct18/R13_2
      
15.24 Lowered slow comparator threshold from 100 to 10
      good event statistics ok (attachment 16)

15.42 took waveforms, triggering ok (attachment 17)
      raised slow comparator threshold to 100 from 10
      start DAQ (R14)
      nnaida22, no statistics showing (see attachment 18)
      subsequent failure to connect to nnaida2

16:44 fixed by rebooting nnaida2 *only*, nnaida2 reset, setup all FEE64s
      slow comparator threshold re-raised from 10 to 100, as default was restored
      DAQ and alpha run restarted (R15)
      Merger and TapeServer ok, no errors in terminal
      good event statistics all ok, except for nnaida2 hot channel (attachment 19)
      
      

09.18 DAQ continues OK - current file Oct18/R10_7
      alpha background run

09.20 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8

       N.B. evidence of minimally ionising particles (presumably protons) from overnight(?) BigRIPs tuning
            to F11 E detector upstream of BRIKEN & AIDA and ongoing beam to F11 E detector
            
            ~10-15cm Pb bricks were placed within BRIKEN (CH2)n stack to stop heavy particles

09.30 JLT reports ~3kHz neutrons in BRIKEN, ~12kHz in F11

      1.8.W spectra 20us FSR - see attachments 9 & 13
      1.8.W spectra 200us FSR - see attachments 10 & 14
      1.8.W spectra 2ms FSR - see attachments 11 & 15
      1.8.W spectra 20ms FSR - see attachments 12 & 16

13.17 Run stopped on file R10_8 (13.16)

13.21 Lowered slow comparator threshold from 100 to 10
      good event statistics ok (attachment 17)

13.36 Took waveforms, all ok (attachment 18)

13.55 Raised slow comparator threshold back to 100 from 10
      Started new alpha run file R12
      TapeServer and Merger ok
      System wide checks ok, except FEE7 fails ADC calibration
      FEE64 temperatures ok (attachment 19)
      Leakage currents ok (attachment 20)
     


      

08.40 DAQ continues OK - current file Oct18/R9_15

08.42 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8
      1.8.W spectra 20us FSR - see attachments 9 & 10

14.43 system wide checks ok, except nnaida7 failing adc calibration

      detector bias/leakage currents all ok (attachment 11)

      FEE64 temperatures ok (attachment 12)

      good event statistics ok

      no errors or warnings in terminal for Merger and TapeServer

15.05 Stopped alpha run - file R9_18 at 14.50
      lowered slow comparator threshold from 100 to 10
      good event statistics were ok, but with FEE1 at 400k (attachment 13)
      did check on ASICs, stats were behaving ok (attachment 14)
      took waveforms, were not initially triggering on p+n side. Change threshold from 8000 to 8500 (attachment 15, 16)

15.12 start new file (alpha run, R10)
      changed threshold back to 100 from 10
      Merger and TapeServer ok
      

   
      
      

08.34 DAQ continues OK - current file Oct18/R9_6

08.37 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8
      1.8.W spectra 20us FSR - see attachments 9 & 10

08.50 temperature +23.8 deg C, RH 38.0%, d.p. +8.6 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level c. 75%

11.10 DAQ continues OK - current file Oct18/R9_7

15.18 system wide checks OK, except nnaida7 ADC calibration failure
      leakage currents OK (attachment 11)
      FEE64 temperatures okay (attachment 12)

15.23 good event statistics OK (attachment 13)
      Merger and TapeServer OK (attachments 14 and 15)
      DAQ still running OK - Oct18/R9_8
      
15.54 Chiller refilled

09:33 DAQ still running, file R4_11. 
      Bias/leakage ok (attachment 1)

      Leakage currents whilst still acceptable are up around 400nA on yesterday
      Have checked all detectors and rates and pulser peak widths are still good across the board
      Will keep an eye on but for now it appears to be ok
      BRIKEN is currently doing a Cf source test so could be a result of charging from the source

      Humidity: 33.1, Temperature: 24.6, Dew point: 7.1
      FEE temperatures ok (attachment 2)

09:38 System wide checks ok

10:25 Pulser peak widths all checked
      Widths comparable to 26th apart from 24 which is much wider from ~70 -> ~120
      Waveforms, layout 7 and 8 - attachments 3 and 4

10:37 Started new run on file R5 at time 10:37
      Threshold changed back to 100 from 10
      Pulser on at 2Hz

16:34 Stopped R5 alpha run
      Lowered thresholds to 0xa to produce higher rate data to test AIDA<->BRIKEN synchronisation
      Started file R6 to do this
      DAQ crashed on start ASIC readout with unable to connect to nnaida19 message appearing.
      Could not clear despite attempts at restarting the merge if that was the cause.

      FEE power cycle

17:03 DAQ recovered, R7 started
      AIDA did not crash
      BRIKEN started Ge fill cycle
      AIDA did not crash during or after

17:17 R7 Stopped sync program is being worked on by Jorge,

17:32 Thresholds raised back to 100 from 10
      Pulser switched off
      R8 started
      leakage current dropping down (attachment 5)

09:22 DAQ found crashed. Appears to have crashed at 20:23 last night whilst writing R3_0 to file.
      Run Control is non responsive
      Leakage currents okay - attachment 1

      Unable to ping any of the nnaida FEEs
      Restarted merger in an attempt to clear links still no response.
      Have powered down FEE64
      
      Replaced blown fuse
      Checked temperatures of FEEs, all okay - attachment 2
      

10:19 Restarted alpha run, write to file Oct18/R4.
      System wide checks - all ok.
      Slow comparator threshold changed to 100 from 10

14:12 FEE temperatures ok (attachment 3)
      Bias/leakage currents ok (attachment 4)
      System wide checks ok
      Alpha run on R4_1

17.45 DAQ continues OK, file Oct18/R4_3

October 25th:
In anticipation of losing access in the evening on arrival at RIKEN the following was done:
- Chiller was refilled
- All power cables reconnected after being removed in October for the RIKEN power down
- All NIM bins, fan trays and RPis were turned on
- 50MHz AIDA clock was set up and connected
- Remote connections to AC Mains relay and RPi for CAEN bias was tested
- Chiller was powered up

October 26th:

11:31 Still have access to the F11 area due to a bigRIPS delay.
      Double checked wiring from yesterday and all still seems good
      Chiller is still running with set point at +20 deg C 

11:36 FEEs powered up. All 24 mounted

11:57 Bias and leakage currents all ok - attachment 1
      FEE temperatures all ok - attachment 2
      System wide checks all ok

13:26 Bias and leakage currents ok - attachment 3
      FEE temperatures all ok - attachment 4
      System wide checks all ok

14:00 Stats are ok - attachment 5
      Appear similar to last time: https://elog.ph.ed.ac.uk/AIDA/747
      However FEE24 and 24 appear much noisier than last time with rates around 100k

19:24 Pulser walkthrough run from 90000 to 10000 in steps of 10000 for R2
      Opened file Oct18/R3, alpha run, threshold at 100kev, pulser on.
      

Data was analysed using offsets calculated based on pulser walkthroughs carried out in June 2018
Offsets appear to still be good. Ex V Ey plots - attachment 1

Hit pattern across the FEEs looks good - attachment 2
x axis is (FEE-1)*64 + Channel

No obvious dead areas in x vs y plots either - attachment 3

             FEE Number
DSSD      A    B    C    D
  1       17   20   22   23
  2       18   19   21   24
  3       9    12   14   15
  4       10   11   13   16
  5       1    4    6    7
  6       2    3    5    8


    DSSD 1 3058-4  Top - Upstream
    DSSD 2 3058-3
    DSSD 3 2998-23
    DSSD 4 3058-5
    DSSD 5 3058-6
    DSSD 6 3058-7  Bottom - Downstream

09.42 DAQ continues OK - current file Sep18/R2_36

09.42 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8
      1.8.W spectra 20us FSR - see attachments 9 & 10

09.46 ASIC check load (file Sep18/R2_36)
      Note for p+n junction strip FEE64s the 1.8.W spectra are only updating for nnaida2, 10 & 17 - these traces
look OK
      Other FEE64s show a noise transient and do not update - ASIC check load did not fix - probably requires
DAQ STOP/GO  

09.57 temperature +25.4 deg C, RH 39.2%, d.p. +10.6 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level c. 80%

13:17 FEE temperatures and system wide checks all ok
      Alpha run R2 stopped
      R2_0 -> R2_37

13:18 Thresholds set to 0xa from 0x64 for all FEEs and ASICs

13:22 R3_0 started
      Thresholds at 0xa and pulser on at 25Hz setting ~ 2Hz

      ASIC settings saved to EXPERIMENTS/AIDA/2018Oct03-13.26.58
      Merger screenshot - attachment 11
      Stats - attachment 12
      Layouts 7 and 8 - attachments 13 & 14 

13:31 R3_0 Stopped

13:34 R4_0 Started
      ASIC thresholds all at 0x9
      Merger screenshot - attachment 15
      Stats - attachment 16
      Layout 1 - attachment 17

13:38 R4_0 Stopped

13:40 R5_0 Started
      ASIC thresholds all at 0x8
      Merger screenshot - attachment 18
      Stats - attachment 19
      Layout 1 - attachment 20

13:45 R5_0 Stopped

13:49 R6_0 Started
      ASIC slow comp at 0x7
      Merger screenshot - attachment 21
      Stats - attachment 22
      Layout 1 - attachment 23

13:52 R6_1 Stopped

      R7_0 Started
      ASIC Slow comp at 0x6
      Merger screenshot - attachment 24
      Stats - attachment 25
      Layout 1 - attachment 26
      Tapeserver window screenshot - attachment 27
      Top window showing 72% CPU usage - attachment 28

15:06 Pulser measurements carried out with thresholds at 0xa
      Typical pulser peak width was ~70-80 with a couple above 100.
      Double peaking that was observed earlier in the week is no longer observed.
      Both in the FEEs and on a scope

      Backside pulser peaks - attachment 29
      Frontside pulser peaks - attachment 30

09.54 DAQ continues OK - current file Sep18/R2_26

09.55 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8
      1.8.W spectra 20us FSR - see attachments 9 & 10
      
10.00 temperature +25.7 deg C, RH 29.6%, d.p. +6.4 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level c. 80%

10.03 ASIC check load (file Sep18/R2_26)

09.10 DAQ continues OK - current file Sep18/R2_16

09.15 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8
      1.8.W spectra 20us FSR - see attachments 9 & 10
      
09.24 temperature +25.5 deg C, RH 43.4%, d.p. +11.9 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level c. 75%

16.25 Julabo FL11006 refill to just below H indicator

      DAQ continues OK - current file Sep18/R2_19

https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit?pli=1#gid=282765719

09.10 DAQ continues OK - current file Sep18/R2_6

09.15 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biased & leakage currents OK - see attachments 1 & 2


      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.W - 20us FSR - see attachments 7 & 8

      all spectra zeroed
      
16.05 temperature +24.2 deg C, RH 45.4%, d.p. +11.6deg C
      Julabo FL11006 water level c. 75-80% (i.e. approx mid-way between middle and upper level indicators)

14:25 Moved from 8x DSSD setup to 6x DSSD
      Top two detectors removed.
      Detector alignments in snout unchanged so can use the 6xDSSD mark from June 2018

      Rev F adapter cards have been put in place for all backside FEEs
      All adapter boards are now Rev E or F
      All adapter boards have an additional ground cable from the screw on the copper block to the lemo ground
connection

      Power on and detectors biased (Cabling changed to reflect new 1-6)
      Leakage and bias ok - attachment 1
      System wide checks all ok
      FEE temperatures ok - attachment 2

      DAQ Started
      Stats are looking very good - attachment 3
      Rates look ok (Lin and Log) - attachments 4 & 5

      Front side waveforms look ok - attachment 6
      Backside waveforms look ok - attachment 7

      Pulser widths are showing double peaking. - attachments 8 & 9
      we are not sure if this is down to the pulser or not

      Expanded timescales of the waveform, 0, 10, 100 and 1000 cycles
      Layout 7 - attachments 10 - 14
      Layout 8 - attachments 15 - 18

15:24 Pulser turned off in prep for alpha run
      Slow comp set to 0x64

15.42 DAQ start file Sep18/R2

      Test and calibration using background alpha particles

      ASIC settings 2018Jun22-11.28.18
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 pulser OFF

      Merger c. 30k items/s TapeServer 230kb/s

10:08 Normal system restart ok
      System currently in 8DSSD configuration as was left in June 2018

      Bias and leakage currents ok - attachment 1
      Temp +24.0 deg C, H 46.8%, D.P +11.7 deg C
      FEE Temperatures ok - attachment 2
      System wide checks all ok (aida7 fails ADC)
      
      DAQ Started with pulser test input
      Statistics ok - attachment 3
      Hit rate laout for first 30 FEEs (Note second ASIC in FEE29 still missing) - attachment 4
      Waveforms for Layout 7 (Front side) ok - attachment 5
      Waveforms for Layout 8 (Back side) good (nnaida 7 missing due to failed ADC check) - attachment 6

> Currently seems to be a problem with the memory check in the system wide checks that produces the message shown
> - attachment 1
> 
> DAQ is being run with the following options - attachment 2 and 3
> 
> The PSU Temperature readout in aida07 appears to not be working. Shows a permanent value of 160 degC - attachment 4
> Water inlet and outlet feel cold so believe it is an artiface
> aida07 also appears to quite often take longer to mount than the others. Often coming in 5 minutes later than them.
> 
> Only tested aida01 - aida04 for noise as we lacked the required HDMI type c cables to set up a full MACB branch
> structure.
> 
> We appear to have considerable noise issues in the FEE modules with adapter boards on but no DSSD cables
> connected but test input loop and pulsar connected.
> The pulsar appears to be the circuit of doom for this noise. With all test input ports connected to a pulsar
> chain each FEE is seeing in the region of 800k rate of good events with discriminator thresholds set to 255.
> Removing the pulsar cable from the end FEE but leaving the chain in place reduces this to around 500k.
> 
> Grounding an adapter board to the copper cooling plate also further reduces this noise somewhat but still leaves
> rates of around 300k.
> 
> If an adapter board is isolated from the chain so that it has nothing connected to it the rate drops to around
> 300-400 which is just the rate of the sync pulses.
> 
> For the following screenshots aida01 and aida02 are isolated adapter boards.
> aida03 and aida04 are connected via lemo cables via the test input to other FEE modules in their chains.
> Waveforms for the 4 FEEs - attachment 5-8
> Full statistics for the 4 FEEs - attachment 9-12
> Good events comparison - attachment 13
> 
> It appears we need to provide a low resistance path between the FEE cooling plates like we do in RIKEN.
> Currently the measured resistance between FEE 6 and 10 is around 2 ohm.
> 
> Also we may need to isolate the pulsar signals themselves
> 
> A potential difference of 5mV was also measured between the chassis of the NIM modules and the cooling plates.
> Resistance was 0ohm when the power was on.

Re:- Memory check problem..... the required log file is not at /MIDAS/XilinxLinux/...... The file is a log file placed
in the FEE64 root file system. The code will be altered in time to reflect the new location by using a local variable.

Re:- aida07. This module should be urgently removed and sent back to Daresbury for repair. This measurement could be
indicative of the worse problems with this module.

Re:- Earthing. Please could you add some photos of the installation. ( apologies if they are already here ;-) If I
recall it is worth adding a low resistance connection ( big copper braid ) from the NIM bin to the adaptor board earths.

Currently seems to be a problem with the memory check in the system wide checks that produces the message shown
- attachment 1

DAQ is being run with the following options - attachment 2 and 3

The PSU Temperature readout in aida07 appears to not be working. Shows a permanent value of 160 degC - attachment 4
Water inlet and outlet feel cold so believe it is an artiface
aida07 also appears to quite often take longer to mount than the others. Often coming in 5 minutes later than them.

Only tested aida01 - aida04 for noise as we lacked the required HDMI type c cables to set up a full MACB branch
structure.

We appear to have considerable noise issues in the FEE modules with adapter boards on but no DSSD cables
connected but test input loop and pulsar connected.
The pulsar appears to be the circuit of doom for this noise. With all test input ports connected to a pulsar
chain each FEE is seeing in the region of 800k rate of good events with discriminator thresholds set to 255.
Removing the pulsar cable from the end FEE but leaving the chain in place reduces this to around 500k.

Grounding an adapter board to the copper cooling plate also further reduces this noise somewhat but still leaves
rates of around 300k.

If an adapter board is isolated from the chain so that it has nothing connected to it the rate drops to around
300-400 which is just the rate of the sync pulses.

For the following screenshots aida01 and aida02 are isolated adapter boards.
aida03 and aida04 are connected via lemo cables via the test input to other FEE modules in their chains.
Waveforms for the 4 FEEs - attachment 5-8
Full statistics for the 4 FEEs - attachment 9-12
Good events comparison - attachment 13

It appears we need to provide a low resistance path between the FEE cooling plates like we do in RIKEN.
Currently the measured resistance between FEE 6 and 10 is around 2 ohm.

Also we may need to isolate the pulsar signals themselves

A potential difference of 5mV was also measured between the chassis of the NIM modules and the cooling plates.
Resistance was 0ohm when the power was on.

> 
> Attachment 1 - DHCP configuration file /etc/dhcpd.conf
> 
> Attachment 2 - DHCP startup messages
> 
> Attachment 3 - FEE64 startup messages from /var/log/messages
> 
> Note
> 
> 1) dhcpd service is not listed by services tool which we have usually used to restart dhcp following
> changes to the configuration. Currently we restart dhcpd as follows
> 
> kill -SIGTERM <pid dhcpd>
> /usr/local/sbin/dhcpd
> 
> 2) significant delays (~6 and ~9 minutes) starting aida07 and aida05, otherwise appears to be normal startup

Regarding startup of 5 and 7. what is the report from the console log monitor?

Attachment 1 - DHCP configuration file /etc/dhcpd.conf

Attachment 2 - DHCP startup messages

Attachment 3 - FEE64 startup messages from /var/log/messages

Note

1) dhcpd service is not listed by services tool which we have usually used to restart dhcp following
changes to the configuration. Currently we restart dhcpd as follows

kill -SIGTERM <pid dhcpd>
/usr/local/sbin/dhcpd

2) significant delays (~6 and ~9 minutes) starting aida07 and aida05, otherwise appears to be normal startup

10:23 Bias and leakage currents ok - attachment 1
      Fee temperatures ok - attachment 2
      System wide checks ok

14:07 Bias and leakage currents ok - attachment 3
      FEE temperatures ok
      System wide checks ok

      Have been unable to recover ASIC 2 in nnaida29. Have checked removing the detector cabling and can still
not recover the ASIC
      Also noise in DSSD1 and 2 is still high - attachment 4
      However in DSSD3-8 it is very good

      Humidity 44.7%, Temperature 25.5C, D.P +13C

15:57 FEE modules turned off via rly16
      DSSD bias removed

      AIDA has been put in a safe state.

10:35 Bias and leakage currents ok - attachment 1
      FEE Temps ok - attachment 2
      System wide checks all ok
      

Attached is an updated inventory of the cables and adapter boards we have in RIKEN.

10:25 Bias and leakage currents ok - attachment 1
      FEE Temperatures ok
      System wide checks ok
      Alpha run R9 stopped on file R9_74

11:05 Bias and leakage currents ok - attachment 1
      FEE temperatures ok
      System wide checks ok
      Currently on file R9_74
      Temperature 25.3C, Humidity 42.9%, D.P +12.1C

13:27 Bias and leakage currents ok - attachment 2
      FEE Temperatures ok
      System wide checks ok

      Analysis of the pulser run R9_52 -> R9_74 has shown no major losses in terms of apparent broken bond wires.
      The large gap in FEE64 29 can be explained by an ASIC dropping out: See https://elog.ph.ed.ac.uk/AIDA/730
      Another odd trend appears in the channels relating to DSSD 8 on the x side. - attachment 5
      The pattern shows one strip on one strip off for the first 32 strips.
      nnaida18 is also the FEE which is running at a much higher rate during this run. - attachment 3
      I'm not sure that I believe that these channels are actually relate to broken bond wires.

      Here are the hit patterns for the 8 DSSD - attachment 4
      Attached is also the x and y histograms for DSSD 8 which shows a weird pattern - attachment 5

10:27 Bias and leakage currents ok - attachment 1
      Fee temperatures ok - attachment 2
      Temperature 24.7C, Humdidity 44.5%, D.P +11.8C
      System wide checks all ok
      Currently on file R9_69

      Vandle guys are about to start building. They have been made aware to avoid the power cables for the
chiller and AIDA
      Also of the network cables and HDMI cables.

14:46 Bias and leakage currents ok - attachment 3
      System wide checks all ok
      FEE temperatures all ok
      Currently on R9_70

19:55 Bias and leakage currents ok - attachment 4
      Fee temperatures ok
      System wide checks ok
      

R7_0 -> R7_1 High Energy pulser run
R8_0 -> R8_1 Low energy puler run
R9_52 -> R9_62 Alpha run

On analysing all three runs it appears an ASIC is missing in FEE 29 - attachments 1 - 3

This ASIC does not appear to be missing in the alpha run carried out on June 24th - attachment 4

I do not believe that this is a broken ASIC.

I have performed an ASIC check load on the FEE module to try and regain it. I will check the files created since
later to see if it has been regained.

Using the pulser runs two different sets of offsets were calculated. One using the low energy run and one using
the high energy.
To compare the two different sets of offsets calculated Ex vs Ey plots were created for the first detector.

Attachment 5 shows these plots on the left is the low energy offsets and on the right the high energy pulser offsets
It can be seen that the grouping is much better with the events being tighter to the y = x line on the run sorted
using the low energy pulser offsets.

10:18 Bias and leakage currents ok - attachment 1
      FEE Temperatures ok
      System wide checks all ok
      Currently on file R9_63
      Humidity 43.3%, Temperature 25.1C, Dew Point +11.8C
      Filler level ok

12:51 Bias and leakage currents ok - attachment 2
      FEE Temperatures ok
      System wide checks all ok
      Currently on file R9_64

19:20 Bias and leakage currents - attachment 3
      FEE temperatures ok
      System wide checks all ok
      Currently on file R9_65
      ASIC 2 is still missing from FEE29. ASIC checks earlier in the afternoon have failed to recover it. -
attachment 4
      This ASIC has been observed to be working since it was installed last week. Once the alpha run is over
further attempts
      will be made to test it is back.

10:20 Bias and leakage currents ok - attachment 1
      FEE temperatures ok
      System wide checks all ok
      Currently on file R9_58

15:25 Bias and leakage currents ok - attachment 2
      FEE temperatures ok - attachment 3
      System wide checks ok
      Currently on file R9_59

04:12 TD found the nnaida14 appeared to have become noisy at some point. Biases/;eakages/temps ok
      ASIC check load appears to have fixed problem
      Noise appears to affect R9_0 to R9_51

13:45 Biases and leakages all ok - attachment 1
      FEE temperatures ok
      System wide checks ok
      T = 25.1C H = 35.7% DP 8.4C
      Currently up to file R9_54

21:53 Biases and leakages all ok - attachment 2
      FEE Temps ok
      System wide checks ok
      Currently up to file R9_56

09:55 Alpha run stopped

10:45 Investigating the large noise in FEE28
      First test was swapping the PSU positions of 29 and 30 - attachment 1
      PSU order 25, 26, 27 ,28, 30, 29, 31, 32

      Little affect on the statistics. 30 remains low and 29 is still high

11:15 System back in normal configuration with 29 and 30 going to original psu units
      PSU order 25, 26, 27 ,28, 29, 30, 31, 32
      System does seem worse off in this order - attachment 2

11:29 Bias cables core and braid switched between detectors 1 and 2
      No noticeable difference - attachment 3

11:44 Switched around cables running to FEE so DSSD1 was running to 29 and DSSD2 to 30
      Noise moved with cable. Though DSSD1 seems worse in 29 than it did in 30. - attachment 4

12:00 Cables moved back in normal operation. Stats returned to as they were at 11:15 - attachment 5

13:28 Changed kapton for a new one. No change to stats - attachment 6

13:55 Wiggled rain wire (Technical term) Tripped DSSD 2 bias. Ramped up bias. Noise gone. Mystery not solved. -
attachment 7


14.09 DAQ start
      AIDA file June18/R7

      ASIC settings DB key 2018Jun22-11.28.18
      *all* slow comparators 0xa

      Pulser walkthrough

      BNC PB-4
      Amplitude 90,000-10,000 @ 10,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 250Hz
      delay MIN, tail pulse, INT ref

14.18 DAQ stop
      See attachment 8 & 9

14.19 DAQ start
      AIDA file June18/R8

      Pulser walkthrough

      BNC PB-4
      Amplitude 12,000-2,000 @ 2,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 250Hz
      delay MIN, tail pulse, INT ref

14.28 DAQ stop
      See attachment 10 & 11

      DAQ statistics OK - see attachment 12
      7x FEE64s <10k
      13x FEE64s 10-20k
      3x FEE64s 20-30k
      3x FEE64s 30-40k
      2x FEE64s 40-50k
      4x FEE64 >50k (nnaida28, 29, 31 & 32)
      *all* system wide checks OK *except* nnaida7 & 21 fail ADC calibration
      FEE64 temperatures OK - see attachment 13
      DSSSD biases and leakage currents OK - see attachments 14 & 15

14.43 DAQ start
      AIDA file June18/R9

      ASIC settings DB key 2018Jun22-11.28.18
      *all* slow comparators 0x64

      alpha background

      BNC PB-4 OFF

18.30 Julabo FL11006 recirculating chiller - water refill - 75%

      per FEE64 1.8.W spectra - range 2ms - see attachments 16 & 17
      per FEE64 1.8.W spectra - range 200us - see attachments 18 & 19
      per FEE64 1.8.W spectra - range 20us - see attachments 20 & 21

Stack has been changed in configuration from a 6 DSSD stack to 8 DSSD stack.
What was detectors 1-6 are now 3-8 with 2 new detectors added to the front.

The stack order is now:
    DSSD 1 3058-25 Top
    DSSD 2 3058-2
    DSSD 3 3058-4
    DSSD 4 3058-3
    DSSD 5 2998-23
    DSSD 6 3058-5
    DSSD 7 3058-6
    DSSD 8 3058-7  Bottom

To handle the new detectors an additional 4 FEE modules 8 FEE64 were installed in the system with MAC addresses:
    FEE 25 - 2B 09 E7
    FEE 26 - 2B 22 55
    FEE 27 - 2A F6 D4
    FEE 28 - 2A ED 8F
    FEE 29 - 2A D0 1A
    FEE 30 - 2B 33 0C
    FEE 31 - 2A B6 45
    FEE 32 - 2A B2 B2

FEE Mapping is now:
                FEE Number
    DSSD     A    B    C    D
     1       25   28   30   31
     2       26   27   29   32
     3       1    20   22   23
     4       2    19   21   24
     5       9    12   14   15
     6       10   11   13   16
     7       17   4    6    7
     8       18   3    5    8

     All 4 new p side cables were made using 33" ribbon cables
     The n side cables for detector 2 were made using 37" cables
     The n side cables for detector 1 were made using 39" ribbon cables (37" was to short)

     Non-isolated cables related to C connector on DSSD

     The detectors were placed inside the snout with two reference lines for insertion.
     The first labelled as June 18 6 stack will place the centre of the detector stack (Between detectors 5 and
6) in the centre of BRIKEN
     when inserted up to this line.

     Distance from edge of BRIKEN to centre is 37.5cm

     The second mark is 1cm along from this and is labelled June 18 8 stack. This positions the centre of the
stack (Between detectors 4 and 5), what would be 3 and 4 if only 6 detectors)
     in the centre of the BRIKEN array.

     One thing to note is that with 8 detectors getting the snout on is a tight fit and can push down the rods
the detectors are held on. This was previously
     a friction fit between the rods and the snout base. The rods had to be pulled out slightly to allow for the
extra length needed for 8 detectors.
     To aid in the rods were not slipping grub nuts were moved to the bottom and locked in position. This may
not hold the strain of someone pushing the snout against them so caution
     is still advised when putting this on.

     When in the 8 stack configuration DSSD 1 is 4.5cm from the end of the snout. To support more detectors
longer rods would be needed though.

09.38 DAQ continues OK

      DAQ stop June18/R5_8

      Detector biases & leakage currents OK - see attachments 1 & 2
      Ambient temperature +25.3 deg C, d.p. +9.4 deg C, RH 36.4%
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except*
        nnaida25 failed global clock check code 6
                 failed ADC calibration

      Analysis June18/R5_8 - see attachment 4

10.00 *all* slow comparator thresholds 0x64 -> 0xa
      BNC PB-4 pulser ON

      per FEE64 1.8.W spectra - 20us & 200us range - see attachments 5-8

14:16 FEE Module nnaida25 & nnaida26 replaced

      nnaida25 2b:09:da -> 2b:09;e7
      nnaida26 2b:11:c5 -> 2b:22:55

      System-wide checks OK *except*
        nnaida21 failed global clock check code 6
                 failed ADC calibration
        nnaida28 failed global clock check code 6
                 failed ADC calibration
511
      Since replacing histograming has begun working for all FEE64s and rates across detectors seem lower

      Waveforms of FEEs attachments 10 & 11
      ADC Rates - attachment 12
      Good event statistics - attachment 13

14.28 per FEE64 1.8.W spectra - 200us range - see attachments 14 & 15

17:06 Thresholds at 0x64 across all FEEs
      Alpha run started R8

      DSSSD stack dismounted yesterday to change configuration from 6x to 8x DSSSDs.

10.15 Overnight, the LHS input fuse (FEE64s 1-16) of the USB-controlled ac mains relay failed.
      New fuses installed - see Elog https://elog.ph.ed.ac.uk/AIDA/720

10.25 Successful power-up

      System-wide checks OK *except*
        nnaida25 failed global clock check code 6 - see attachment 1 
                 failed ADC calibration

      Histogramming enabled for all FEE64s
      Following DAQ GO *and* before START ASIC Readout only FEE64s 1-24 *and* 25 remain enabled

10.55 *all* FEE64 temperatures OK - see attachment 2

11.00 Stop DAQ

      Start MERGE and TapeServer
      Configure MERGE for 32x FEE64s

      Histogramming *and data transfer #1 enabled for all FEE64s
      Following DAQ GO *and* before START ASIC Readout only FEE64s 1-24 *and* 25 remain histogram enabled, *all*
FEE64s enabled for data transfer #1 - see attachment 3

11.44 Observe low leakage current (as expected) with detector bias 100V - see attachments 4 & 5
      HV#2 reads zero which may be be too low - to be checked with DSSSD

18.15 June18/R4

      Histogramming not available nnaida26-32

      Pulser data
      ASIC settings 2018Jun22-11.28.18
      *all* slow comparators 0xa

      BNC PB-4 Pulser
      Amplitude 90,000 
      x5 attenuator IN
      t_r 100ns, tau_d 1ms 
      frequency c. 2Hz
      polarity +
      delay MIN, ref INT, tail pulse

      detector biases & leakage currents OK - see attachments 6 & 7
      ambient temperature +25.4 deg C, d.p. +10.1 deg C, RH 37.6%
      FEE64 temperatures OK - see attachment 8
      DAQ statistics - nnaida22, 25, 28, 29 & 30 high - see attachment 9
      MERGE/Tapeserver - see attachments 10 & 11

18.28 DAQ stop (final file R4_4)

      Analysis of R4_0 - note lots of HEC data for nnaida25

 *** TDR format 3.3.0 analyser - TD - June 2017
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  258702070 ( 1412508.5 Hz)
        Other data format:    2377771 (   12982.6 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         66 (       0.4 Hz)
                               RESUME:         66 (       0.4 Hz)
                              SYNC100:    2234733 (   12201.6 Hz)
                           FEE64 disc:     142906 (     780.3 Hz)
                             MBS info:          0 (       0.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:    4319574 (   23584.8 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:      183.151 s
 FEE  elapsed dead time(s) elapsed idle time(s)
  1                0.000                0.000
  2                0.000                0.000
  3                0.000                0.000
  4                0.000                0.000
  5                0.000                0.000
  6                0.000                0.000
  7                0.000                0.000
  8                0.000                0.000
  9                0.000                0.000
 10                0.000                0.000
 11                0.000                0.000
 12                0.000                0.000
 13                0.000                0.000
 14                0.016                0.000
 15                0.000                0.000
 16                0.000                0.000
 17                0.000                0.000
 18                0.000                0.000
 19                0.000                0.000
 20                0.000                0.000
 21                0.000                0.000
 22                0.245                0.000
 23                0.022                0.000
 24                0.000                0.000
 25                0.738                0.771
 26                0.000                0.000
 27                0.028                0.000
 28                0.023                0.000
 29                0.000                0.000
 30                0.186                0.194
 31                0.364                0.000
 32                0.246                0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS      Other
  HEC Data
  0          0          0          0          0          0          0          0          0          0          0
         0
  1    3222303      76527          0          0          0          0      69859       6668          0          0
       569
  2    2941948      76748          0          0          0          0      69857       6891          0          0
         0
  3    5670829      75859          0          0          0          0      69850       6009          0          0
         0
  4    2125453      74279          0          0          0          0      69858       4421          0          0
         0
  5    2136921      77632          0          0          0          0      69862       7770          0          0
         0
  6    2391640      73715          0          0          0          0      69858       3857          0          0
         0
  7    5890950      74230          0          0          1          1      69858       4370          0          0
         4
  8    3513119      75980          0          0          0          0      69864       6116          0          0
        11
  9    2263483      74984          0          0          0          0      69859       5125          0          0
         0
 10    2586263      77464          0          0          0          0      69857       7607          0          0
         0
 11    1010024      75142          0          0          0          0      69860       5282          0          0
         0
 12    1589585      74212          0          0          0          0      69857       4355          0          0
         0
 13    1683394      76604          0          0          0          0      69859       6745          0          0
         0
 14    6156870      74846          0          0          4          4      69856       4982          0          0
        25
 15    4365448      74530          0          0          0          0      69856       4674          0          0
         0
 16    4573069      75434          0          0          0          0      69864       5570          0          0
         0
 17    2440883      73800          0          0          0          0      69858       3942          0          0
         5
 18    3555638      78294          0          0          0          0      69853       8441          0          0
         0
 19    1011281      77659          0          0          0          0      69859       7800          0          0
         0
 20    1348970      74278          0          0          0          0      69856       4422          0          0
       123
 21    3718102      79600          0          0          0          0      69862       9738          0          0
         0
 22   31353026      76209          0          0         10         10      69765       6424          0          0
        10
 23    7467427      75889          0          0          3          3      69851       6032          0          0
        15
 24    5627550      75520          0          0          0          0      69855       5665          0          0
         0
 25   18997744      69607          0          0         13         13      69581          0          0          0
   4318786
 26    4444974      69852          0          0          0          0      69852          0          0          0
         0
 27    7927708      69857          0          0          3          3      69851          0          0          0
         6
 28   24389685      69867          0          0          9          9      69849          0          0          0
         9
 29   52059614      69858          0          0          0          0      69858          0          0          0
         0
 30   17131235      69796          0          0          4          4      69788          0          0          0
         3
 31   12650414      69742          0          0         11         11      69720          0          0          0
         8
 32   12456520      69757          0          0          8          8      69741          0          0          0
         0

 *** Timewarps
 FEE       ADC      Pause     Resume    SYNC100       Disc        MBS  Undefined    Samples
  0          0          0          0          0          0          0          0          0
  1          0          0          0          0          0          0          0          0
  2          0          0          0          0          0          0          0          0
  3          0          0          0          0          0          0          0          0
  4          0          0          0          0          0          0          0          0
  5          0          0          0          0          0          0          0          0
  6          0          0          0          0          0          0          0          0
  7          0          0          0          0          0          0          0          0
  8          0          0          0          0          0          0          0          0
  9          0          0          0          0          0          0          0          0
 10          0          0          0          0          0          0          0          0
 11          0          0          0          0          0          0          0          0
 12          0          0          0          0          0          0          0          0
 13          0          0          0          0          0          0          0          0
 14          0          0          0          0          0          0          0          0
 15          0          0          0          0          0          0          0          0
 16          0          0          0          0          0          0          0          0
 17          0          0          0          0          0          0          0          0
 18          0          0          0          0          0          0          0          0
 19          0          0          0          0          0          0          0          0
 20          0          0          0          0          0          0          0          0
 21          0          0          0          0          0          0          0          0
 22          0          0          0          0          0          0          0          0
 23          0          0          0          0          0          0          0          0
 24          0          0          0          0          0          0          0          0
 25          0          0          0          0          0          0          0          0
 26          0          0          0          0          0          0          0          0
 27          0          0          0          0          0          0          0          0
 28          0          0          0          0          0          0          0          0
 29          0          0          0          0          0          0          0          0
 30          0          0          0          0          0          0          0          0
 31          0          0          0          0          0          0          0          0
 32          0          0          0          0          0          0          0          0

 *** MBS Timewarps
 FEE 
  0          0
  1          0
  2          0
  3          0
  4          0
  5          0
  6          0
  7          0
  8          0
  9          0
 10          0
 11          0
 12          0
 13          0
 14          0
 15          0
 16          0
 17          0
 18          0
 19          0
 20          0
 21          0
 22          0
 23          0
 24          0
 25          0
 26          0
 27          0
 28          0
 29          0
 30          0
 31          0
 32          0

 *** Program elapsed time:   21.492s ( 1488.913 blocks/s,  93.057 Mb/s)

19.10 June18/R5

      Histogramming not available nnaida26-32

      alpha background
      ASIC settings 2018Jun22-11.28.18
      *all* slow comparators 0x64

      BNC PB-4 Pulser OFF

The input fuses of the USB-controlled ac mains relay have been changed from 2x 5x20mm 250V/16A to 2x 5x20mm
250V/20A cartridge, time-lag Littelfuse 0215020.MXP

10:50 Yesterday 4 FEE modules installed for FEE64s 25-32
      dhcpd.conf updated to reflect MAC addresses of new FEE64s

      AIDA config file updated
      located at /MIDAS/config/TclHttpd/aidas1/

      Firmware updated to /MIDAS/Aida/FEE_GF_Nov16_3.bin
      Using run control GUI failed for nnaida28 - see attachment 1
      Re-run manually OK

      FEE64 temperatures OK, all firmware versions OK - see attachment 2

      Power cycle all FEE64 mounted. 5 minute delay in nnaida30 being mounted

      Updated ASIC, DISC (but not WAVEFORM) settings for FEE64s 25-32
        DB key 2018Jun22-11.28.18

      Update Options for FEE64s 25-32 (now same as FEE64s 1-24)

      Power cycle OK

      Histogramming tag (H) drops for FEE64s 25-32 at DAQ GO - see attachment 3 

      *all* FEE64 statistics (except histogram-related counters) OK

      AIDA config & dhcpd.conf files attached - see attachments 4-5

The DSSSD HV cabling has been changed in preparation for configuration change
from 6x DSSSDs to 8x DSSSDs as follows:

FROM                 TO

DSSSD  N1419  HV     DSSSD  N1419  HV
#      Addr   #      #      Addr   #

                     1      0      1
                     2      0      2
1      0      1      3      0      3
2      0      7      4      0      4
3      0      3      5      1      5
4      0      4      6      1      6
5      1      5      7      1      7
6      1      6      8      1      8

See attachments 1 & 2 - DSSSDs # 1-2 not installed yet

Analysis of overnight alpha background run (June18/R1_0 ... _2) indicates that all FEE64s and DSSSDs are
operating OK.

Spectra for DSSSD #1-6 - see attachments 1-5

Sort program, variables and spectra titles - see attachments 6-7

Sort program statistics

 *** ENTRY finish

 *** data items:  671431805 ( 363493.31 Hz)
 *** ADC events:     743540 (    402.53 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:       266 old count:       266 dt:  73278.38 s  LEC rate:      0.00 Hz
 *** DSSSD # 2 count:       119 old count:       119 dt:  73278.38 s  LEC rate:      0.00 Hz
 *** DSSSD # 3 count:       131 old count:       131 dt:  73278.38 s  LEC rate:      0.00 Hz
 *** DSSSD # 4 count:        97 old count:        97 dt:  73278.38 s  LEC rate:      0.00 Hz
 *** DSSSD # 5 count:       103 old count:       103 dt:  73278.38 s  LEC rate:      0.00 Hz
 *** DSSSD # 6 count:       122 old count:       122 dt:  73278.38 s  LEC rate:      0.00 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:  73278.38 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt:  73278.38 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:  73278.38 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:  73278.38 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:  73278.38 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt:  73278.38 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

10.20 DAQ continues OK

10.29 DAQ stop June18/R1

      ASIC settings 2017Nov17-21.24.47
      *all* FEE64 slow comparators 0x64

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK
      PLL and DCM Clock Lock Monitor OK - see attachment 5

11.09 Julabo FL11006 recirculating chiller - ON - water level OK (75%)
      Tektronix AFG3102 - CH2 ON - amplitude +5V, phase 180n deg, offset 0V, frequency 50.000000MHz

      AIDA FEE64 power ON

      AIDA FEE64 boot OK

Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.6:868 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida6 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.2:996 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.1:914 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida1 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.8:937 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida8 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.7:690 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida7 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.3:686 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida3 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.4:992 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida4 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:03 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.5:719 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida5 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:22 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:07 via p2p1
Jun 20 11:08:22 aidas1 dhcpd: DHCPOFFER on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Jun 20 11:08:22 aidas1 dhcpd: DHCPREQUEST for 10.1.1.10 (10.1.1.250) from 00:04:a3:2a:f7:07 via p2p1
Jun 20 11:08:22 aidas1 dhcpd: DHCPACK on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Jun 20 11:08:22 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:2f via p2p2
Jun 20 11:08:22 aidas1 dhcpd: DHCPOFFER on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Jun 20 11:08:22 aidas1 dhcpd: DHCPREQUEST for 10.1.2.12 (10.1.2.250) from 00:04:a3:2a:d0:2f via p2p2
Jun 20 11:08:22 aidas1 dhcpd: DHCPACK on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:0e via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.16 (10.1.2.250) from 00:04:a3:2a:9c:0e via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPACK on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f3:ac via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.15 (10.1.2.250) from 00:04:a3:2a:f3:ac via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPACK on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:ad via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.9 (10.1.1.250) from 00:04:a3:2a:d9:ad via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPACK on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b9 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.13 (10.1.1.250) from 00:04:a3:2b:11:b9 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPACK on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:af via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.11 (10.1.2.250) from 00:04:a3:2b:11:af via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPACK on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Jun 20 11:08:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b8 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.14 (10.1.1.250) from 00:04:a3:2b:11:b8 via p2p1
Jun 20 11:08:23 aidas1 dhcpd: DHCPACK on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.10:837 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida10 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.12:819 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida12 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.16:813 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida16 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.15:802 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.9:717 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida9 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.13:835 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida13 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.11:823 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida11 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.14:772 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida14 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:08:56 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:08:57 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:08:58 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:08:58 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:08:58 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:08:58 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:08:59 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:01 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:20 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:20 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f6:e9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.22 (10.1.1.250) from 00:04:a3:2a:f6:e9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:06 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.23 (10.1.2.250) from 00:04:a3:2a:d0:06 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:ae via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.18 (10.1.1.250) from 00:04:a3:2b:11:ae via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:11 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.20 (10.1.2.250) from 00:04:a3:2a:d0:11 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.17 (10.1.1.250) from 00:04:a3:2a:ed:b9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:54 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.19 (10.1.2.250) from 00:04:a3:2b:27:54 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:b6 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.2.24 (10.1.2.250) from 00:04:a3:2a:d9:b6 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Jun 20 11:09:23 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:23 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPOFFER on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPREQUEST for 10.1.1.21 (10.1.1.250) from 00:04:a3:2b:27:23 via p2p1
Jun 20 11:09:23 aidas1 dhcpd: DHCPACK on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Jun 20 11:09:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.22:734 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida22 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.23:933 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida23 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.18:760 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida18 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.20:954 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.17:693 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida17 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:23 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.19:991 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida19 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:24 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.24:743 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida24 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:24 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.21:952 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida21 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:09:40 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:42 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:45 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.13:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:45 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:45 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:09:46 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:38 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:43 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:43 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:45 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:45 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:46 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:47 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:10:47 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)
Jun 20 11:12:31 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:e1 via p2p1
Jun 20 11:12:31 aidas1 dhcpd: DHCPOFFER on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Jun 20 11:12:31 aidas1 dhcpd: DHCPREQUEST for 10.1.1.2 (10.1.1.250) from 00:04:a3:2a:d9:e1 via p2p1
Jun 20 11:12:31 aidas1 dhcpd: DHCPACK on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Jun 20 11:12:31 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.2:816 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Jun 20 11:12:58 aidas1 rpc.mountd[2867]: authenticated mount request from 10.1.1.2:863 for /MIDAS@aidas
(/MIDAS@aidas)

      DAQ starts OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Nov17-21.24.47
      *all* FEE64 slow comparators 0xa

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK *except* nnaida13 ~355k - see attachment 4
      *all* system wide checks OK
      PLL and DCM Clock Lock Monitor OK - see attachment 5

13:55 detector biases & leakage currents OK - attachment 6 
      FEE64 Temperatures ok - attachment 7
      System wide checks ok
      Layouts 1-4 - attachments 8 - 11
      Layouts 7 & 8 - attachments 12-13

14:08 Alpha run started as June18/R1
      Slow comp threshold at 0x64 across all FEEs
      Statistics screen shot of good events - attachment 14

13.00

Julabo FL11006 chiller
  water level 75% (OK)
  set point +20 deg C
  chiller ON

aidas1
  em1 DHCP configuration fails - Baba-san informed
  aidas1 restarted - 395 days since last filesystem check - filesystem fsck -p commences  
  progress pauses @ 16.2% for extended period (~1h)
  boot completes 16.46

  Baba-san checks/changes network cabling at B3F hub

10.11 Detector bias OFF
      FEE64 power OFF
      BNC PB-4 OFF
      2x NIM bins OFF - fan tray OFF
      Julabo FL11006 chiller OFF - 3ph mains switch OFF
      USB ac mains relay OFF - flow interlock enabled - USB disconnected 

      Raspberry Pis ON
      Tektronix AFG3102C ON

https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=282765719

09.33 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      7x FEE64s <10k
      4x FEE64s 10-20k
      6x FEE64s 20-30k
      2x FEE64s 30-40k
      0x FEE64s 40-50k
      5x FEE64 >50k (nnaida13 280k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 rate, 1.8.L, 1.8.W (20ms FSR) spectra - see attachments 5-10
      pulser peak width nnaida17 70 ch FWHM, nnaida8 72 ch FWHM

09.27 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      8x FEE64s <10k
      2x FEE64s 10-20k
      5x FEE64s 20-30k
      3x FEE64s 30-40k
      1x FEE64s 40-50k
      5x FEE64 >50k (nnaida13 255k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

09.42 per FEE64 rate, 1.8.L, 1.8.W (20ms FSR) spectra - see attachments 5-10
      all spectra zero'd

17.05 Detector biases & leakage currents OK - see attachments 11 & 12
      FEE64 Temperatures OK - see attachment 13
      DAQ statistics OK - see attachment 14
      7x FEE64s <10k
      4x FEE64s 10-20k
      2x FEE64s 20-30k
      4x FEE64s 30-40k
      2x FEE64s 40-50k
      5x FEE64 >50k (nnaida13 261k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 rate, 1.8.L, 1.8.W (20ms FSR) spectra - see attachments 15-20
      pulser peak width nnaida17 69 ch FWHM, nnaida8 72 ch FWHM

09.50 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      7x FEE64s <10k
      4x FEE64s 10-20k
      5x FEE64s 20-30k
      3x FEE64s 30-40k
      1x FEE64s 40-50k
      4x FEE64 >50k (nnaida13 255k)
      PLL & DCM Clock Lock Monitor OK - see attachment 5 & https://elog.ph.ed.ac.uk/AIDA/704 attachment 14
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

16.39 Detector biases & leakage currents OK - see attachments 5 & 6
      FEE64 Temperatures OK - see attachment 7
      DAQ statistics OK - see attachment 8
      7x FEE64s <10k
      4x FEE64s 10-20k
      5x FEE64s 20-30k
      3x FEE64s 30-40k
      1x FEE64s 40-50k
      4x FEE64 >50k (nnaida13 255k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

10.45 Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      DAQ statistics OK - note *all* slow comparators 0xa - see attachment 3
      7x FEE64s <10k
      4x FEE64s 10-20k
      4x FEE64s 20-30k
      4x FEE64s 30-40k
      1x FEE64s 40-50k
      4x FEE64 >50k
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

14.05 *all spectra zero'd

14.24 Detector biases & leakage currents OK - see attachments 4 & 5
      FEE64 Temperatures OK - see attachment 6
      DAQ statistics OK - see attachment 7
      7x FEE64s <10k
      3x FEE64s 10-20k
      4x FEE64s 20-30k
      5x FEE64s 30-40k
      1x FEE64s 40-50k
      4x FEE64 >50k
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 rate, 1.8.L and 1.8.W spectra (20ms FSR) - see attachments 8-13

14.48 MONLOCK monitor - see attachment 14

13.27 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      7x FEE64s <10k
      4x FEE64s 10-20k
      6x FEE64s 20-30k
      4x FEE64s 30-40k
      2x FEE64s 40-50k
      1x FEE64 >50k (nnaida13 64k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration


13.50 all spectra zero'd
      *all* ASIC slow comparator settings -> 0xa
      DAQ statistics - see attachment 5
       

17:05 1.*.W spectra for front strips attached - see attach 6-17
      Layout 3 & 4 - see attach 18,19

nnaida1 Peak width =    79.68+/-  0.3080, Peak area =    189026.00+/-   434.77
nnaida2 Peak width =   126.52+/-  1.0035, Peak area =    180119.00+/-   426.09
nnaida5 Peak width =    79.16+/-  1.1547, Peak area =    189192.00+/-   434.96
nnaida6 Peak width =    78.30+/-  0.2948, Peak area =    189316.00+/-   435.10
nnaida9 Peak width =    77.54+/-  0.2578, Peak area =    189201.00+/-   434.97
nnaida10 Peak width =    88.96+/-  0.7201, Peak area =    189252.00+/-   435.03
nnaida13 Peak width =   225.44+/-  0.6773, Peak area =    178047.00+/-   421.96
nnaida14 Peak width =    81.43+/-  0.5754, Peak area =    188275.50+/-   435.05
nnaida17 Peak width =    74.42+/-  0.3670, Peak area =    189139.00+/-   434.90
nnaida18 Peak width =    78.13+/-  2.1601, Peak area =    188683.00+/-   436.03
nnaida21 Peak width =   155.44+/-  0.7619, Peak area =    183728.00+/-   428.64
nnaida22 Peak width =   120.95+/-  0.3604, Peak area =    184462.00+/-   429.49

nnaida3 Peak width =    80.08+/-  0.1346, Peak area =    190083.00+/-   435.99
nnaida4 Peak width =    82.15+/-  0.1403, Peak area =    190143.00+/-   436.0
nnaida7 Peak width =    87.46+/-  0.6821, Peak area =    190314.00+/-   436.25
nnaida8 Peak width =    69.86+/-  1.0958, Peak area =    189915.50+/-   437.33
nnaida11 Peak width =    99.95+/-  0.2553, Peak area =    188884.00+/-   436.10
nnaida12 Peak width =   101.40+/-  0.2937, Peak area =    188737.00+/-   436.02
nnaida15 Peak width =    78.17+/-  1.8691, Peak area =    188912.00+/-   436.61
nnaida16 Peak width =   107.16+/-  1.1332, Peak area =    190392.00+/-   436.34
nnaida19 Peak width =   137.14+/-  0.2579, Peak area =    186414.50+/-   432.426
nnaida20 Peak width =   128.06+/-  0.9060, Peak area =    185287.00+/-   437.16
nnaida23 Peak width =   103.67+/-  0.3636, Peak area =    190221.00+/-   436.14
nnaida24 Peak width =    99.72+/-  0.4577, Peak area =    189176.00+/-   436.85

MIDASsort offline analysis Nov17/R2_8-R2_16 data

N.B. 
1) no software thresholds
2) no PID correlation

n+n FEE64 nnaida15 Ibias LF feedback 0xf

Implantation rate (DSSSD # 1-6) c. 15Hz
Elapsed time 3441s

 *** ENTRY finish

 *** data items: 2088746796 (  80001.28 Hz)
 *** ADC events:  363022502 (  13904.16 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:  15477751 old count:  15473939 dt:   3441.15 s  LEC rate:   4497.84 Hz
 *** DSSSD # 2 count:  12001205 old count:  11998220 dt:   3441.15 s  LEC rate:   3487.55 Hz
 *** DSSSD # 3 count:   5162182 old count:   5160784 dt:   3441.15 s  LEC rate:   1500.13 Hz
 *** DSSSD # 4 count:  11035612 old count:  11032823 dt:   3441.15 s  LEC rate:   3206.95 Hz
 *** DSSSD # 5 count:    395233 old count:    395139 dt:   3441.15 s  LEC rate:    114.85 Hz
 *** DSSSD # 6 count:    168148 old count:    168117 dt:   3441.15 s  LEC rate:     48.86 Hz
 *** DSSSD # 1 count:      1087 old count:      1086 dt:   3441.15 s  HEC rate:      0.32 Hz
 *** DSSSD # 2 count:      4233 old count:      4233 dt:   3441.15 s  HEC rate:      1.23 Hz
 *** DSSSD # 3 count:     12370 old count:     12364 dt:   3441.15 s  HEC rate:      3.59 Hz
 *** DSSSD # 4 count:     24528 old count:     24527 dt:   3441.15 s  HEC rate:      7.13 Hz
 *** DSSSD # 5 count:      7256 old count:      7252 dt:   3441.15 s  HEC rate:      2.11 Hz
 *** DSSSD # 6 count:       509 old count:       509 dt:   3441.15 s  HEC rate:      0.15 Hz

 *** ENTRY finish ends

Offline analysis of

AIDA RIBF128/R5_124 to R5_148 data "130Ag setting", June 2017 RIBF128 experiment         *yellow*
AIDA Oct17/R17_31 to R17_34 data   "84Ge setting" , October 2017, 78Ni experiment        *red*
AIDA Nov17/R2_8 to R2_16 data      "115Nb setting", November 2017 RIBF139 experiment     *blue*

N.B. 
1) no software thresholds
2) no PID correlation
3) unless otherwise stated, all implant energies are the stopping layer implant energies

Attachment 1 - *total* implant energy for AIDA DSSSD stack (5.6MeV/channel)

Attachment 2 - implant energy for stopping DSSSD layer (20MeV/channel)

Attachments 3-4 - per pixel implant-decay correlation times (163.84us/ch)

The 130Ag data (yellow) clearly shows the "20ms bump" but the later test data (red & blue)
with the revised AIDA FEE64 adaptor PCBs *and* using ASIC setting I_bias LF feedback 0x8 -> 0xf
for all p+n FEE64s shows (with the limited statistics available) no evidence of a "20ms bump".

19.03 DAQ started OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa

      Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      DAQ statistics OK - see attachment 3
      *all* system wide checks OK *except* nnaida7 fails ADC calibration
      Rate look OK. A few dropped channels. See attach 4
      Waveforms look OK. Noise at reasonable levels. See attach 5 & 6

19:15 Started run Nov17/R1
      Kbyte/sec written 2611
      Merger data rate 346210 items/sec

19:26 Observed increase in rate in asics nnaida13, 19 (>50 000)
      Noise profile looks typical. See waveforms - attach 7,8
      Increased FEE64 slow comparators for nnaida 13, 19 from 0xa to 0xc
      Rate decreases significantly. See attach 9

19.40 Beam on
      BigRIPS 115Nb setting
      WAS3ABI + YSO

      Good Event, merger and data rates OK - see attachments 10-12
      8x FEE64s <10k
      8x FEE64s 10-20k
      6x FEE64s 20-30k
      2x FEE64s 30-40k

19.57 per FEE64 1.8.W spectra (2ms FSR) - see attachments 14-15

20.06 per FEE64 1.8.L spectra - see attachments 16-17
      nnaida17 67 ch FWHM
      nnaida8  73 ch FWHM

20.50 DAQ starts

RIKEN run: 005
Wasabi Run: 4048
BigRIPS run: 2057
AIDA run R2_0
Listmode DLT file:171117_2050_115Nb_005.dlt

BRIKEN Rate (h:12): ~ 42 cps
F11 Rate (h:18): ~ 37 cps
CLOVERS Rate (h:15): ~ 33 cps
AIDA Veto Plastic Rate (h:19): ~ 23

      WAS3ABi in
      YSO removed
      AIDA inserted to HPGe clover cryostat position

      BigRIPS 115Nb setting
      Degrader 5mm Al

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xf, nnaida19 0xc, nnaida20-21 0xb

20.57 all spectra zero'd

      Good Event stats - see attachment 18
      7x FEE64s <10k
      5x FEE64s 10-20k
      4x FEE64s 20-30k
      4x FEE64s 30-40k
      3x FEE64s 40-50k
      1x FEE64 >50k (nnaida13 73k)



21.22 Not all ASICs settings restored from 2017Oct23-14.38.03
      Some p+n FEE64s Ibias LF feedback 0x8 *not* 0xf as expected - now changed manually
      AIDA data file Nov17/R2_5

      ASIC settings saved to 2017Nov17-21.24.47
      Updated options

21.33 New BigRIPS, BRIKEN, WAS3ABi files started
      AIDA continues from R2_6

Date: 17/11/017
Start: 2133
RIKEN run: 006
Wasabi Run: 4061
BigRIPS run: 2058
AIDA run R2_06
Listmode DLT file:171117_2132_115Nb_006.dlt

BRIKEN Rate (h:12): ~ 42 cps
F11 Rate (h:18): ~ 37 cps
CLOVERS Rate (h:15): ~ 33 cps
AIDA Veto Plastic Rate (h:19): ~ 23


21.40 Detector biases & leakage currents OK - see attachments 19 & 20
      FEE64 Temperatures OK - see attachment 21
      DAQ statistics OK - see attachment 22
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 1.8.* spectra (20ms FSR) see attachments 23 & 24
      p+n spectra now look OK with Ibias LF feedback changed from 0x8 to 0xf
      note 3kHz appears in nnaida19, 21 & 22

22.41 DAQ stop
      AIDA data file Nov17/R2_15

      *use R2_8 - R2_15* for offline analysis

22.50 AIDA withdrawn from BRIKEN
      YSO re-installed

23.10 Detector biases & leakage currents OK - see attachments 25 & 26
      FEE64 Temperatures OK - see attachment 27
      DAQ statistics OK - see attachment 28
      7x FEE64s <10k
      4x FEE64s 10-20k
      8x FEE64s 20-30k
      2x FEE64s 30-40k
      2x FEE64s 40-50k
      1x FEE64 >50k (nnaida13 64k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 1.8.W spectra (20ms FSR) - see attachments 29 & 30
      per FEE64 rate spectra linear and log scales - see attachments 31 & 32

23.30 all spectra zero'd

12:32 Chiller found almost empty & still working at 20C. Refilled to overflow.

08.09 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      DAQ statistics OK - see attachment 3
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

13:35 DAQ running ok
      Fee temperatures - attachment 4
      Stats - attachment 5
      Leakage currents and bias ok - Attachment 6

13:39 Bias taken off detectors
      Server windows closed and servers halted
      FEE power relays turned off
      Chiller remains on

08.09 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration - see attachment 6
      PLL and DCM Clock Lock Monitor OK - see attachment 5

08.22 per FEE64 Rate, 1.8.L and 1.8.W spectra - see attachments 7-12
      nnaida3 78 ch FWHM
      nnaida17 66 ch FWHM

16.43 Detector biases & leakage currents OK - see attachments 13 & 14
      FEE64 Temperatures OK - see attachment 15
      DAQ statistics OK - see attachment 16
      *all* system wide checks OK *except* nnaida21 fails ADC calibration - see attachment 6
      PLL and DCM Clock Lock Monitor OK - see attachment 5

      per FEE64 Rate, 1.8.L pectra - see attachments 17-20
      nnaida3 78 ch FWHM
      nnaida17 68 ch FWHM

10.56 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      DAQ statistics OK - see attachment 3
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

10.56 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

      p+n FEE64s 1.8.L spectra - see attachment 5 - nnaida17 FWHM 63 ch
      n+n FEE64s 1.8.L spectra - see attachment 6 - nnaida3 FWHM 78 ch
      per FEE64 rate spectra - see attachments 7 & 8

11.06 all spectra zero'd

17.28 Detector biases & leakage currents OK - see attachments 9 & 10
      FEE64 Temperatures OK - see attachment 11
      DAQ statistics OK - see attachment 12
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

18.46 per PJCS request two screenshots of nnaida21:8015/AIDA/MONLOCK/MONLOCK.tml
      see attachments 13 & 14

23:52 Statistics still good - Attachment 15
      Leakage and bias ok - Attachment 16

11:24 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      DAQ statistics OK - see attachment 3
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

Offline analysis of the AIDA Oct17/R17_31 to R17_34 data "84Ge setting"
compared to an equivalent analysis of the AIDA RIBF128/R5_124 to R5_148
data from the 130Ag setting of the June 2017 RIBF128 experiment.

N.B. 
1) no software thresholds
2) no PID correlation
3) unless otherwise stated, all implant energies are the stopping layer implant energies

Attachment 1 - implantation energy (20MeV/ch, range 20.48GeV)
               versus
               per pixel implant-decay correlation time (163.84us/ch, range 16.78ms)

               The 130Ag data (lower) clearly shows the "20ms bump", there is no
               evidence for a "20ms bump" in the "84Ge" data (upper).

               Note the non-observation of the "20ms bump" in the "84Ge" data
               is not explained by the larger range of implant energies of the
               130Ag data ( see attachment 7 )
               
Attachments 2-3 - per pixel implant-decay times (163.84us/ch)

                  upper 130Ag setting
                  lower "84Ge setting"

Attachments 4-5 - per pixel implant-decay times (163.84us/ch)

                  red 130Ag setting
                  yellow "84Ge setting"

Attachment 6 - *total* implant energy for AIDA DSSSD stack (5.6MeV/channel)

               yellow 130Ag setting
               red "84Ge setting"

Attachment 7 - implant energy for stopping DSSSD layer (20MeV/channel)

               red 130Ag setting
               yellow "84Ge setting"

Attachment 8 - per pixel decay-decay correlation time (163.84us/ch, range 16.78ms)
               versus
               per pixel implant-decay correlation time (163.84us/ch, range 16.78ms)

               upper "84Ge setting"
               lower 130Ag setting

Attachment 9 - x and y-axis projections for 130Ag setting spectrum

               @x per pixel implant-decay correlation time (163.84us/ch, range 16.78ms)
               @y per pixel decay-decay correlation time (163.84us/ch, range 16.78ms)

Attachment 10 - x and y-axis projections for "84Ge setting" setting spectrum

               @x per pixel implant-decay correlation time (163.84us/ch, range 16.78ms)
               @y per pixel decay-decay correlation time (163.84us/ch, range 16.78ms)

09.34 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

15.02 Detector biases & leakage currents OK - see attachments 5 & 6
      FEE64 Temperatures OK - see attachment 7
      DAQ statistics OK - see attachment 8
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Ambient temperature +24.3 deg C, d.p. -0.2 deg C, RH 19.8%
      Julabo FL11006 recirculating chiller set point +20 deg C, actual +20.0 deg C, water level OK c. mid-point
middle-upper marker
     

10.10 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

15.56 Detector biases & leakage currents OK - see attachments 5 & 6
      FEE64 Temperatures OK - see attachment 7
      DAQ statistics OK - see attachment 8
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

14.16 DAQ running OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Julabo FL11006 recirculating chiller set point +20 deg C, actual +20.0 deg C
      Ambient temperature +23.9 deg C, d.p. +10.8 deg C, RH 43.2%

15.05 per FEE64 Rate, 1.8.L and 1.8.W spectra - note common x & y scales
      Peak width nnaida5 63 ch FWHM
      Peak width nnaida8 82 ch FWHM

15.09 All histograms zero'd

18.25 Detector biases & leakage currents OK - see attachments 11 & 12
      FEE64 Temperatures OK - see attachment 13
      DAQ statistics OK - see attachment 14
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

For comparison with waveforms shown in https://elog.ph.ed.ac.uk/AIDA/665 and https://elog.ph.ed.ac.uk/AIDA/668

Note; nnaida21 ADC did not calibrate during setup therefore no waveforms for this FEE64

Current configuration

p+n junction strips FEE64 adaptor PCB rev D -> FEE64 adaptor PCB rev E
ac coupling 10n/100V/X7R -> 33n/100V/X7R
detector bias RC filter 3.3k/10n added
ASIC setting Ibias LF feedback 0x8 -> 0xf *except* nnaida2 ->0xc

n+n ohmic strips FEE64 adaptor PCB rev C *no change*
ASIC setting Ibias LF feedback 0xb *no change*


Attachments 1-5 waveforms for n+n ohmic strips

Attachment 1 - per FEE64 1.8.W, 20us range
Attachment 2 - per FEE64 1.8.W, 20us range, expanded y=scale
Attachment 3 - per FEE64 1.8.W, 200us range, expanded y=scale
Attachment 4 - per FEE64 1.8.W, 2ms range, expanded y=scale
Attachment 5 - per FEE64 1.8.W, 20ms range, expanded y=scale

Attachments 6-10 waveforms for p+n junction strips

Attachment 6 - per FEE64 1.8.W, 20us range
Attachment 7 - per FEE64 1.8.W, 20us range, expanded y=scale
Attachment 8 - per FEE64 1.8.W, 200us range, expanded y=scale
Attachment 9 - per FEE64 1.8.W, 2ms range, expanded y=scale
Attachment 10 - per FEE64 1.8.W, 20ms range, expanded y=scale

11.33 DAQ running OK - date transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      DAQ statistics OK - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Julabo FL11006 recirculating chiller set point +20 deg C, actual +20.0 deg C
      Ambient temperature +26.2 deg C, d.p. +6.2 deg C, RH 28.3%

14.40 Detector biases & leakage currents OK - see attachments 5 & 6
      FEE64 Temperatures OK - see attachment 7
      DAQ statistics OK - see attachment 8
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

14.50 DAQ starts
      AIDA data file Oct17/R18

14.53 per FEE64 rates (20us/channel) - see attachment 9
      No indication of c. 400us period noise as indicated by DAQ statistics attachment 8

15.46 DAQ stopped

      DAQ start - data tranfser disabled

19.40 Detector biases & leakage currents OK - see attachments 10 & 11
      FEE64 Temperatures OK - see attachment 12
      DAQ statistics OK - see attachment 13
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

Offline analysis of High Energy Channel (HEC) 20GeV FSR data from AIDA data file Oct17/R17_31-R17_34

Degrader OUT

Attachment 1 - per DSSSD #1-6 m_p versus m_n
Attachment 2 - 2D spectra contour levels/colours
Attachment 3 - per DSSSD #1-6 x versus y 
Attachment 4 - per DSSSD #1-6 E_p versus E_n (20MeV/channel nominal)

Attachments 5-7 - as above but with all statistics from AIDA data files Oct17/R17_34

Attachment 8 - Sum of E_p energies for DSSSD #1-6 (5.6MeV/channel nominal)

               Peak at channel 1450 corresponds to an energy of 8.1GeV
               End of spectrum channel 1850 corresponds to 10.4GeV

               Note - HEC data not gain-matched
                      Using nominal HEC calibration accurate to ~ +/-20%

               

09.56 DAQ stopped OK yesterday

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xe, nnaida19-22 0xc

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Julabo FL11006 recirculating chiller coolant reservoir refilled - set point +20 deg C, actual +20.0 deg C
      Ambient temperature +23.6 deg C, d.p. +6.2 deg C, RH 32.2%

      AIDA withdrawn from (CH2)n matrix

      DAQ started - no data transfer
      good events statistics stable - see attachment 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

13:30 System wide checks ok
      Stats - Attachment 6
      FEE temperatures ok - Attachment 7
      leakage and bias ok - Attachment 8

17.15 Detector biases & leakage currents OK - see attachments 9 & 10
      FEE64 Temperatures OK - see attachment 11
      good events statistics stable - see attachment 12
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Ambient temperature +25.2 deg C, d.p. +5.7 deg C, RH 28.5%

02.37 DAQ stalled - USB-controlled ac mains relay fuse blown
      Not writing to disk

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa

      Detector biases & leakage currents OK - see attachments 1 & 2
      *all* system wide checks OK *except* nnaida21 fails ADC calibration
      Ambient temperature +24.3 deg C, d.p. +8.7 deg C, RH 37.1%

02.54 Replace 250V/16A fuse and power up

      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachments 4

03:30 Stats with nnaida13 slow comparator threshold raised to 140keV - Attachment 5

03:50 Pulser widths done, slow comparator threshold raised to 0xc ~120keV for  nnaida 19-22
      Statistics - Attachment 6

05:40 Beam now going into F11. Wasabi and YSol in front of AIDA
      AIDA is seeing light particles
      Waveforms look good
      Layout 7 - Attachment 7
      layout 8 - Attachment 8
      Statistics with light particles going through - Attachment 9
      Bias and leakage currents ok - Attachment 10

      We are taking the light ion data to file in R17_*

06:50 Light ion data continues
      System wide checks all ok

07:22 Bias and leakage ok - Attachment 11
      FEE Temperatures ok - Attachment 12
      Stats - Attachment 13

08:15 Light ions stop still writing file

08:27 Beam into aida run R17_30
      Zero degrader, just 4mm of WAS3ABI
      WAS3ABI run 120
      BRIKEN started run at 08:27 run 18
      BIGRIPS Run 8
      Timestamp reset at 08:27
      Stats with beam - Attachment 14

08:44 Waveforms with implants in the detector
      Layout 7 - Attachments 15 & 16
      Layout 8 - Attachments 17 & 18
      Layout 1  linear and log attachments 19 & 20 
      Leakage and bias ok - Attachment 21

09:14 Just noticed the stats in nnaida13 has dropped rate. Noise source may have been turned off
      Statistics - Attachment 22

      Spectra from the 0mm degrader run - Attachments 22-27

09:20 BRIKEN and WAS3ABI stop on run 162 aida on R17_35
      1mm degrader moved in
      BigRIPS on run 9
      BRIKEN run 19
      WAS3ABI start on 163
      AIDA on R17_35

      Rates similar to last screenshot of stats 09:14

09:26 Leakage and bias ok - Attachment 28

09:41 Beam stops
      AIDA on file R17_37
      BRIKEN stops running
      WAS3ABI on run 178

AIDA Files written
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:22 R17_29
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:31 R17_30
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:40 R17_31
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:50 R17_32
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:00 R17_33
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:10 R17_34
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:21 R17_35
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:31 R17_36
-rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:42 R17_37
-rw-rw-rw-. 1 npg npgstaff 329M Oct 26 09:44 R17_38

11.27 DAQ continues
      Not writing to disk

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachments 4
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

11.47 Ambient temperature +23.9 deg C, d.p. +9.0 deg C, RH 39.0%

16:45 System wide checks all ok 
      FEE temps ok - Attachment 5
      Stats - Attachment 6
      Bias and leakage ok - Attachment 7

11.16 DAQ continues
      AIDA file Oct17/R8_107

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03

11.20 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachments 4 & 5
      no merger/tapeserver errors reported since start of run - see attachments 6 & 7
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

11.30 Ambient temperature +23.3 deg C, d.p. +4.1 deg C, RH 28.7%

11.30 analysis file Oct17/R7_108 - zero deadtime, 6x MBS and zero ts timewarps - see attachment 8

11.39 DAQ stop

11.44 DAQ start
      AIDA file Oct17/R9

      Pulser walkthrough

      BNC PB-4
      Amplitude 90,000-10,000 @ 10,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 250Hz
      delay MIN, tail pulse, INT ref

11.53 DAQ stop
      See attachment 8

11.44 DAQ start
      AIDA file Oct17/R10

      Pulser walkthrough

      BNC PB-4
      Amplitude 12,000-2,000 @ 2,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 250Hz
      delay MIN, tail pulse, INT ref

11.53 DAQ stop
      See attachment 9

12.06 DAQ starts
      AIDA file Oct17/R12

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03

14.41 online analysis 
      ADC synchronised - see attachment 10


17.12 DAQ starts
      AIDA file Oct17/R13

      Background for LuckyDoll automatic threshold determination

      BNC PB-4 OFF

      ASIC settings 2017Oct23-14.38.03
      Slow comparator nnaida13 0xc, nnaida19-22 0xb, all other FEE64s 0xa

      DAQ statistics - see attachment 11

17.27 DAQ stop
      
18.03 DAQ starts
      AIDA file Oct17/R16

      Background for LuckyDoll automatic threshold determination

      BNC PB-4 OFF

      ASIC settings 2017Oct23-14.38.03
      Slow comparator *all* FEE64s 0xa

      DAQ statistics - see attachment 12

18.22 DAQ stop

18.48 DAQ statistics
      Slow comparator *all* FEE64s 0xa - see attachment 13
      Slow comparator *all* FEE64s 0x9 - see attachment 14
      Slow comparator *all* FEE64s 0x8 - see attachment 15
      Slow comparator *all* FEE64s 0x7 - see attachment 16

18.53 Detector biases & leakage currents OK - see attachments 13 & 14
      FEE64 Temperatures OK - see attachment 15
      *all* system wide checks OK *except* nnaida21 fails ADC calibration

> 10:18 Leakage and bias ok - Attachment 1
>       FEE temperatures ok - Attachment 2
>       Statistics - Attachment 3
>       DAQ continues ok
> 
> 10:23 DAQ stopped on R7_10
>       Alpha run through night
> 
> 10:28 MIDAS Sort spectra from the alpha run
>       Ep versus En - Attachment 4
>       x versus y 2D hit pattern - Attachment 5
>       Front versus back multiplicity - Attachment 6
> 
>       2D Hit pattern indicates detection of alphas in all 4 regions of each of the 6 detectors
>       indicates cabling is ok
> 
> 11:55 FEEs turned off after being unable to recover after crash
Please could you define this 'crash' to allow a better understanding of problems with the system. 
For example.... what is unresponsive.... does a parse of the FEE64 log files ( before doing anything ) reveal a panic that is new? Does a STOP of the Tape work ? Does a Toggle of the MERGE pause state 
work ? 
Thus it will be possible to say that ..... FEE # is always the one responsible for DAQ failure or by < ???? > or the MERGE has found < ??? > problem.
Thanks in advance ;-)))

> 
> 13:49 FEEs powered on again
>       Pi monitor indicates panic on nnaida22 the FEE that crashed
> 
>       ReSync done on setup except for 23 and 24
>       Master ReSync done succesfully
>       ASIC settings loaded default to 2017Mar27
>       Restoring 2017Oct22
>       
>       System wide checks ok
>       Leakage and bias ok - Attachment 7
>       FEE temperatures crashed - Attachment 8
> 
>       Upon reboot all rates across the FEEs appear lower
>       In particular 13 and 14. Thresholds have been reduced back to 0xa for all ASICs on both FEEs
> 
>       Layout 1 linear common y of 2000 - Attachment 9
>       Layout 1 log common y of 10 - Attachment 10
> 
>       All front side FEE64 1.8.W waveforms - 20us range - Attachment 11
>       All back side FEE64 1.8.W waveforms - 20us range - Attachment 12
> 
>       All front side FEE64 1.8.W waveforms - 2ms range - Attachment 13
>       All back side FEE64 1.8.W waveforms - 2m range - Attachment 14
> 
>       FEE64 nnaida13 1.*.W waveforms - Ibias LF 0xf - 2ms range - Attachment 15
> 
>       Statistics after switch and thresholds lowered - Attachment 16
>       Pulser widths measured. On boards changed 10 out of 12 FEEs show greater than 10% improvements
>       11 out of 24 total show greater than 10%
>       FEE stats post pulser width - Attachment 17
> 
>       New ASIC settings DB key: 2017Oct23-14.38.03
>       Slow comparator 0xa for all FEE64s and all ASICs
>       IBias LF feedback at 0xf for all front side FEEs except nnaida 2 which is at 0xc
>       IBias LF feedback at 0xb for all back side FEEs
>       ASIC settings DB file checked OK
> 
>       Ambient temperature +23.3 deg C, D.P +7.1 deg C,  R.H. 35.2%
>       Julabo FL11006 set point +20.0 deg C, water le
> 
> 15:38 Merger and TapeServer screenshots - Attachments 17-18
>       

10:18 Leakage and bias ok - Attachment 1
      FEE temperatures ok - Attachment 2
      Statistics - Attachment 3
      DAQ continues ok

10:23 DAQ stopped on R7_10
      Alpha run through night

10:28 MIDAS Sort spectra from the alpha run
      Ep versus En - Attachment 4
      x versus y 2D hit pattern - Attachment 5
      Front versus back multiplicity - Attachment 6

      2D Hit pattern indicates detection of alphas in all 4 regions of each of the 6 detectors
      indicates cabling is ok

11:55 FEEs turned off after being unable to recover after crash

13:49 FEEs powered on again
      Pi monitor indicates panic on nnaida22 the FEE that crashed

      ReSync done on setup except for 23 and 24
      Master ReSync done succesfully
      ASIC settings loaded default to 2017Mar27
      Restoring 2017Oct22
      
      System wide checks ok
      Leakage and bias ok - Attachment 7
      FEE temperatures crashed - Attachment 8

      Upon reboot all rates across the FEEs appear lower
      In particular 13 and 14. Thresholds have been reduced back to 0xa for all ASICs on both FEEs

      Layout 1 linear common y of 2000 - Attachment 9
      Layout 1 log common y of 10 - Attachment 10

      All front side FEE64 1.8.W waveforms - 20us range - Attachment 11
      All back side FEE64 1.8.W waveforms - 20us range - Attachment 12

      All front side FEE64 1.8.W waveforms - 2ms range - Attachment 13
      All back side FEE64 1.8.W waveforms - 2m range - Attachment 14

      FEE64 nnaida13 1.*.W waveforms - Ibias LF 0xf - 2ms range - Attachment 15

      Statistics after switch and thresholds lowered - Attachment 16
      Pulser widths measured. On boards changed 10 out of 12 FEEs show greater than 10% improvements
      11 out of 24 total show greater than 10%
      FEE stats post pulser width - Attachment 17

      New ASIC settings DB key: 2017Oct23-14.38.03
      Slow comparator 0xa for all FEE64s and all ASICs
      IBias LF feedback at 0xf for all front side FEEs except nnaida 2 which is at 0xc
      IBias LF feedback at 0xb for all back side FEEs
      ASIC settings DB file checked OK

      Ambient temperature +23.3 deg C, D.P +7.1 deg C,  R.H. 35.2%
      Julabo FL11006 set point +20.0 deg C, water le

15:38 Merger and TapeServer screenshots - Attachments 17-18
      

10:10 DAQ found crashed
      Stopped writing to file at 05:31
      System wide checks ok
      Statistics - Attachment 1
      FEE temperatures - Attachment 2

      Error message when stopping the DAQ - Attachment 3

      Bias and leakage currents ok - Attachment 4

10:18 Error when trying to reset and setup DAQ - Attachment 5

      Followed by:
STATE for nnaida1 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida1:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida1:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida2 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida2:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida2:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida3 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida3:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida3:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida4 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida4:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida4:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida5 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida5:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida5:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida6 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida6:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida6:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida7 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida7:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida7:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida8 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida8:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida8:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout
$timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControl

10:26 Unable to recover from crash by restarting the merger
      FEEs turned off. Will leave off whilst changing the adapter boards

11.28 Power up all FEE64s - 20s between each relay 

11.46 Pi Monitor Browser reports all FEE64s 'Finished OK', all FEE64s '0 panics'

15:12 Waveforms of FEEs 5,6,9,10,17,18,13,14 showing the change in Ibias LF feedback value
      First attachment will be waveform with LF 0x8 and second will be 0xF
      FEE13 has only one as was on the rails at anything above 0x8 - Attachments 6-20

      Waveforms for FEEs 19 and 20 for comparisons - Attachments 21 & 22

      Attachment      FEE       Change
           6           5        default
           7           5        LF 0xf
           8           6        default
           9           6        LF 0xf
           10          9        default
           11          9        LF 0xf
           12          10       default
           13          10       LF 0xf
           14          17       default
           15          17       LF 0xf
           16          18       default
           17          18       LF 0xf
           18          13       default
           19          14       default
           20          14       LF 0xf
           21          19       default
           22          20       default

16:02 New ASIC settings folder 2017Oct22-15.59.25
      Settings changed related to A and C FEEs in which Ibias LF Feedback has been changed to LF0x8 for all
      with the exception of FEE 2 which is set to 0xC and 14 which is set to 0x8
      ASIC 1 of nnaida14 has a SC threshold of 0x20
      All of nnaida 13 has a SC threshold of 0xf

      Stats running in these setting - Attachment 23
      System wide checks ok
      FEE temperatures ok - Attachment 24
      Leakage and bias ok - Attachment 25

16.16 Start Oct17/R7

      Background alpha activity

      BNC PB-4 Pulser OFF

      ASIC settings per 2017Oct22-15.59.25

10:48 Adapter boards replaced for DSSD 1 &2 (FEEs 1,2,22 and 21)
      Previous boards were Rev D new boards are Rev E

      System wide checks ok
      FEE Temperatures ok - Attachment 1

10:54 DSSDs biased up. Note that after new boards installed DSSD 1 and 2 had leakage currents of around 9uA
during ramp up
      Leakage currents appear to have dropped as they reach 100V set point
      T = 23.8 H = 45% D.P = +11.1
      Leakage and Bias ok - Attachment 2

11:11 Waveforms for FEEs 22, 21, 11 and 13 - Attachments 3 - 10
      Statistics - Attachment 11

14:00 System wide checks all ok 
      Leakage and bias ok - Attachment 12
      FEE temperatures ok - Attachment 13

14:26 Spectra comparing the values for nnaida waveforms for different Ibias LF Feedback values
      Values are indicated in image title. If not mentioned value 0x8 - Attachments 14 - 23

14:37 Spectra showing the effect of different slow comparator values on the sawtooth signal in the waveforms
      Spectra are all nnaida22 and slow comparator values in image titles - Attachments 24 - 26

      Attachment      FEE     Change
           14          1      default
           15          1      LF 0xf
           16          2      default
           17          2      LF 0xf
           18          2      LF 0xc
           19          21     default
           20          21     default
           21          21     LF 0xf
           22          22     default
           23          22     LF 0xf
           24          22     LF 0xf SC 0xf
           25          22     LF 0xf SC 0xd
           26          22     LF 0xf SC 0xb

15:09 Raised slow comparator threshold to 0x40 ~ 640keV for all FEEs and all ASICs
      Hit pattern in attachment 27
      Statistics - Attachment 28

      New adapter boards appear to have improved the amount of white noise at default ASIC settings
      This is shown with the decrease in statistics and also in the waveforms.
      At default settings the saw tooth patterns still appear in the waveforms though attenuated
      with lower frequencies and lower amplitudes.
      Further improvements can be gained in reducing the amplitude and frequency of the saw tooth
      patterns by changing the Ibias LF feedback value though care has to be taken that the pre-amp
      signal is not taken to the rails. Hence FEE 2 has a value of 0xc rather than 0xf like the others.
      Hit pattern checked for the pulser by raising the slow comparator threshold to 640keV. The boards that
      have been changed show a much more believable rate than those that haven't which are still showing
      higher than pulser rates.

16:09 The effect of changing the shaping time on the pulser widths was checked.
      Optimum still appears to be at around 8us

16:50 DAQ started writing to Oct17/R5 @ 8Mb/s
      nnaida 13 SC threshold at 0x20
      System wide checks ok
      Leakage and bias ok - Attachment 29
      FEE Temp ok - Attachment 30
      Statistics - Attachment 31

09:43 DAQ continues ok
      System wide checks all ok
      Detector bias and leakage ok - Attachment 1
      FEE temperatures ok - Attachment 2
      On file R3_279 writing at ~11Mb/s

10:07 Waveforms for nnaida 13, 11, 20 and 22 - Attachments 3-7
      nnaida 13 & 22 p-side
      nnaida 11 & 20 n-side
      Preamp feedback settings for ASIC are still default

10:49 DAQ Stopped
      Detector bias taken off

> 
> 09.40 DAQ continues OK
>       File /TapeData/Oct17/R1_280
> 
>       BNC PB-4 Pulser frequency switched from 250Hz to 25Hz range
> 
> 09:54 ASIC Temperatures - Attachment 1
>       Bias and leakage currents ok - Attachments 2 & 3
>       Statistics - Attachment 4
> 
> 10:19 Output of analysis of R1_291 - Attachment 5
> 
> 11:02 Pulser widths measured before changing jumpers (In log book)
>       DAQ stopped on Run R1_304
> 
> 11:31 All field plane jumpers removed (Jumpers 1&3)
>       System wide checks ok
>       ASIC load check ok
> 
> 11:37 DAQ started online only
>       Statistics - Attachment 6
>       FEE temperatures - Attachment 7
> 
> 11:46 Layout 1 - Attachments 8 & 9
>       Layout 2 - attachments 10
> 
> 13:38 Layouts 3 - Attachment 11
>       Layout 4 - Attachment 12
>       Pulser widths measured using 1.8.L spectra.
>       Most channels show an increase in noise with the FWHM increased by ~5-10 channels
>       (Recorded in log book)
> 
> 13:55 Layout 7 p-side waveforms - Attachments 13 & 14
>       Layout 8 n-side waveforms - Attachments 15 & 16
>       For comparison with jumpers on see yesterday's elog entry: https://elog.ph.ed.ac.uk/AIDA/674
> 
> 14:02 DAQ stopped
> 
> 14:23 PCB ground plane jumper removed from all adapter boards (Jumper 2)
> 
>       Bias and leakage currents ok T = 23.0 DP = +8.8 H = 38.7% - Attachment 17
>       System wide checks all ok
>       ASIC load check ok
> 
>       DAQ Started
> 
> 14:44 FEE temperatures all ok - Attachment 18
>       Statistics - Attachment 19
> 
> 14:54 Layout 1 - Attachment 20 & 21
>       Layout 2 - Attachment 22
> 
> 15:17 Layout 3 p-side pulser - Attachment 23
>       Layout 4 n-side pulser - Attachment 24
> 
>       Pulser widths measured using 1.8.L spectra
> 
>       In comparison with just having the FP jumpers removed for channels that were not noisy before they show no
>       to only minor increases in noise.
> 
>       However channels that were previously noisy with all jumpers on show drastic increases in the amount of
>       noise. Increases in the FWHM of up to 80ch
> 
> 13:55 Layout 7 p-side waveforms - Attachments 25 & 26
>       Layout 8 n-side waveforms - Attachments 27 & 28
> 
>       DAQ Stopped
> 
> 16:15 Detector bias turned off as replacing the jumpers is challenging
> 
> 16:55 All jumpers back on. I advise starting with all on the new boards tomorrow and removing if needed.
>       Pain to put back on when mounted with cables.
> 
> 16:59 System wide checks ok
>       Bias back on and leakage currents ok - Attachment 29
> 
> 17:09 Statistics - Attachment 30
>       FEE temperatures - Attachment 31
> 
>       By putting the jumpers back the statistics appear to have recovered to a similar level to this morning
> 
> 17:25 FEEs powered down to do a power cycle for Patrick
> 
> 17:50 FEEs powered up
> 
> 18:00 Same javascript errors as yesterday when setting up DAQ
>       System wide checks all ok
>       FEE Temperatures ok
>       
> 18:06 DAQ started
>       Statistics similar to before power cycle - Attachment 32
>       Layout 1 looks good - Attachments 33 & 34
> 
> 18:14 DAQ stopped
> 
> 18:16 DAQ Started
>       Writing to R2 in /TapeData/Oct17/
>       Writing at 11Mb/s
> 
> 18:56 Statistics - Attachment 35
Please could you repeat the power cycle and this time turn all the FEE64s at once. The error I am looking to solve occurs ( so it is believed ) when all 24 request access to the server together.

09.40 DAQ continues OK
      File /TapeData/Oct17/R1_280

      BNC PB-4 Pulser frequency switched from 250Hz to 25Hz range

09:54 ASIC Temperatures - Attachment 1
      Bias and leakage currents ok - Attachments 2 & 3
      Statistics - Attachment 4

10:19 Output of analysis of R1_291 - Attachment 5

11:02 Pulser widths measured before changing jumpers (In log book)
      DAQ stopped on Run R1_304

11:31 All field plane jumpers removed (Jumpers 1&3)
      System wide checks ok
      ASIC load check ok

11:37 DAQ started online only
      Statistics - Attachment 6
      FEE temperatures - Attachment 7

11:46 Layout 1 - Attachments 8 & 9
      Layout 2 - attachments 10

13:38 Layouts 3 - Attachment 11
      Layout 4 - Attachment 12
      Pulser widths measured using 1.8.L spectra.
      Most channels show an increase in noise with the FWHM increased by ~5-10 channels
      (Recorded in log book)

13:55 Layout 7 p-side waveforms - Attachments 13 & 14
      Layout 8 n-side waveforms - Attachments 15 & 16
      For comparison with jumpers on see yesterday's elog entry: https://elog.ph.ed.ac.uk/AIDA/674

14:02 DAQ stopped

14:23 PCB ground plane jumper removed from all adapter boards (Jumper 2)

      Bias and leakage currents ok T = 23.0 DP = +8.8 H = 38.7% - Attachment 17
      System wide checks all ok
      ASIC load check ok

      DAQ Started

14:44 FEE temperatures all ok - Attachment 18
      Statistics - Attachment 19

14:54 Layout 1 - Attachment 20 & 21
      Layout 2 - Attachment 22

15:17 Layout 3 p-side pulser - Attachment 23
      Layout 4 n-side pulser - Attachment 24

      Pulser widths measured using 1.8.L spectra

      In comparison with just having the FP jumpers removed for channels that were not noisy before they show no
      to only minor increases in noise.

      However channels that were previously noisy with all jumpers on show drastic increases in the amount of
      noise. Increases in the FWHM of up to 80ch

13:55 Layout 7 p-side waveforms - Attachments 25 & 26
      Layout 8 n-side waveforms - Attachments 27 & 28

      DAQ Stopped

16:15 Detector bias turned off as replacing the jumpers is challenging

16:55 All jumpers back on. I advise starting with all on the new boards tomorrow and removing if needed.
      Pain to put back on when mounted with cables.

16:59 System wide checks ok
      Bias back on and leakage currents ok - Attachment 29

17:09 Statistics - Attachment 30
      FEE temperatures - Attachment 31

      By putting the jumpers back the statistics appear to have recovered to a similar level to this morning

17:25 FEEs powered down to do a power cycle for Patrick

17:50 FEEs powered up

18:00 Same javascript errors as yesterday when setting up DAQ
      System wide checks all ok
      FEE Temperatures ok
      
18:06 DAQ started
      Statistics similar to before power cycle - Attachment 32
      Layout 1 looks good - Attachments 33 & 34

18:14 DAQ stopped

18:16 DAQ Started
      Writing to R2 in /TapeData/Oct17/
      Writing at 11Mb/s

18:56 Statistics - Attachment 35

11.57 Startup of AIDA following June 2017 shutdown

      Julabo FL11006 ON, set point +20 deg C
      Water flow indicators OK
      Water level OK

      Tektronix AFG3102C
      Channel 2 - square wave, 50MHz, 180 deg, 0V offset, +5V amplitude

      MACB root master - mode 5

      Power up 24x FEE64s

      aidas1:/var/log/messages

[root@aidas1 npg]# tail -f /var/log/messages
Oct 18 11:02:19 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
Oct 18 11:02:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.114 from b8:27:eb:0b:f6:73 via p2p1
Oct 18 11:02:21 aidas1 dhcpd: DHCPACK on 10.1.1.114 to b8:27:eb:0b:f6:73 (raspberrypi) via p2p1
Oct 18 11:02:39 aidas1 dnsmasq[3260]: reading /etc/resolv.conf
Oct 18 11:02:39 aidas1 dnsmasq[3260]: using nameserver 10.32.0.1#53
Oct 18 11:06:59 aidas1 dhcpd: DHCPRELEASE of 10.1.1.114 from b8:27:eb:0b:f6:73 (raspberrypi) via p2p1 (found)
Oct 18 11:07:31 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:0b:f6:73 via p2p1
Oct 18 11:07:32 aidas1 dhcpd: DHCPOFFER on 10.1.1.114 to b8:27:eb:0b:f6:73 (raspberrypi) via p2p1
Oct 18 11:07:32 aidas1 dhcpd: DHCPREQUEST for 10.1.1.114 (10.1.1.250) from b8:27:eb:0b:f6:73 (raspberrypi) via p2p1
Oct 18 11:07:32 aidas1 dhcpd: DHCPACK on 10.1.1.114 to b8:27:eb:0b:f6:73 (raspberrypi) via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d4:b7 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.1.6 (10.1.1.250) from 00:04:a3:2a:d4:b7 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:e1 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.1.2 (10.1.1.250) from 00:04:a3:2a:d9:e1 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:07 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.2.8 (10.1.2.250) from 00:04:a3:2a:9c:07 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b8 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:1b via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.2.4 (10.1.2.250) from 00:04:a3:2a:ed:b8 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.1.1 (10.1.1.250) from 00:04:a3:2a:d0:1b via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:b8:8d via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.2.7 (10.1.2.250) from 00:04:a3:2a:b8:8d via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:06 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.2.3 (10.1.2.250) from 00:04:a3:2a:f7:06 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Oct 18 11:29:36 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:10 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPOFFER on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPREQUEST for 10.1.1.5 (10.1.1.250) from 00:04:a3:2a:d0:10 via p2p1
Oct 18 11:29:36 aidas1 dhcpd: DHCPACK on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.6:915 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida6 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.2:1000 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.8:720 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida8 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.4:924 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida4 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.1:937 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida1 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.7:932 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida7 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.3:1008 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida3 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:36 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.5:911 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida5 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:07 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.1.10 (10.1.1.250) from 00:04:a3:2a:f7:07 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:2f via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.2.12 (10.1.2.250) from 00:04:a3:2a:d0:2f via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f3:ac via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:0e via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.2.15 (10.1.2.250) from 00:04:a3:2a:f3:ac via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.2.16 (10.1.2.250) from 00:04:a3:2a:9c:0e via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:ad via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b9 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.1.9 (10.1.1.250) from 00:04:a3:2a:d9:ad via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.1.13 (10.1.1.250) from 00:04:a3:2b:11:b9 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:af via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.2.11 (10.1.2.250) from 00:04:a3:2b:11:af via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Oct 18 11:29:49 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b8 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPOFFER on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPREQUEST for 10.1.1.14 (10.1.1.250) from 00:04:a3:2b:11:b8 via p2p1
Oct 18 11:29:49 aidas1 dhcpd: DHCPACK on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.10:895 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida10 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.12:707 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida12 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.15:707 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.16:697 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida16 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.9:1012 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida9 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.13:711 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida13 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.11:835 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida11 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:29:49 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.14:997 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida14 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:24 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:31 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:32 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:32 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:33 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:33 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:34 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f6:e9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.1.22 (10.1.1.250) from 00:04:a3:2a:f6:e9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:06 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.2.23 (10.1.2.250) from 00:04:a3:2a:d0:06 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:ae via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.1.18 (10.1.1.250) from 00:04:a3:2b:11:ae via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.1.17 (10.1.1.250) from 00:04:a3:2a:ed:b9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:11 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.2.20 (10.1.2.250) from 00:04:a3:2a:d0:11 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:54 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.2.19 (10.1.2.250) from 00:04:a3:2b:27:54 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:b6 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.2.24 (10.1.2.250) from 00:04:a3:2a:d9:b6 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Oct 18 11:30:37 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:23 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPOFFER on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPREQUEST for 10.1.1.21 (10.1.1.250) from 00:04:a3:2b:27:23 via p2p1
Oct 18 11:30:37 aidas1 dhcpd: DHCPACK on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.22:973 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida22 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.23:881 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida23 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.17:825 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida17 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.18:784 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida18 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.20:898 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.19:968 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida19 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:37 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.24:795 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida24 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:30:38 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.21:715 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida21 (/data10/XilinxLinux/ppc_4xx/rfs)
Oct 18 11:31:09 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:10 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:10 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:11 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:11 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.13:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:11 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:11 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:31:11 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:04 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:04 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:04 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:06 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:06 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:06 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:07 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Oct 18 11:32:07 aidas1 rpc.mountd[2855]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)

       nnaida24:/var/log/messages

Oct 18 04:31:50 nnaida24 syslogd 1.4.2: restart.
Oct 18 04:31:51 nnaida24 kernel: klogd 1.4.2, log source = /proc/kmsg started.
Oct 18 04:31:51 nnaida24 kernel: Using Xilinx Virtex440 machine description
Oct 18 04:31:51 nnaida24 kernel: Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue
Nov 15 15:57:04 GMT 2011
Oct 18 04:31:51 nnaida24 kernel: Zone PFN ranges:
Oct 18 04:31:51 nnaida24 kernel:   DMA      0x00000000 -> 0x00007000
Oct 18 04:31:51 nnaida24 kernel:   Normal   0x00007000 -> 0x00007000
Oct 18 04:31:51 nnaida24 kernel: Movable zone start PFN for each node
Oct 18 04:31:51 nnaida24 kernel: early_node_map[1] active PFN ranges
Oct 18 04:31:52 nnaida24 kernel:     0: 0x00000000 -> 0x00007000
Oct 18 04:31:52 nnaida24 kernel: MMU: Allocated 1088 bytes of context maps for 255 contexts
Oct 18 04:31:52 nnaida24 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 28448
Oct 18 04:31:52 nnaida24 kernel: Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Oct 18 04:31:52 nnaida24 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Oct 18 04:31:52 nnaida24 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct 18 04:31:53 nnaida24 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 18 04:31:53 nnaida24 kernel: Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k
data, 130k bss, 168k init)
Oct 18 04:31:53 nnaida24 kernel: Kernel virtual memory layout:
Oct 18 04:31:53 nnaida24 kernel:   * 0xffffe000..0xfffff000  : fixmap
Oct 18 04:31:53 nnaida24 kernel:   * 0xfde00000..0xfe000000  : consistent mem
Oct 18 04:31:53 nnaida24 kernel:   * 0xfde00000..0xfde00000  : early ioremap
Oct 18 04:31:53 nnaida24 kernel:   * 0xd1000000..0xfde00000  : vmalloc & ioremap
Oct 18 04:31:53 nnaida24 kernel: NR_IRQS:512
Oct 18 04:31:54 nnaida24 kernel: clocksource: timebase mult[a00000] shift[22] registered
Oct 18 04:31:54 nnaida24 kernel: Console: colour dummy device 80x25
Oct 18 04:31:54 nnaida24 kernel: Mount-cache hash table entries: 512
Oct 18 04:31:54 nnaida24 kernel: NET: Registered protocol family 16
Oct 18 04:31:54 nnaida24 kernel: PCI: Probing PCI hardware
Oct 18 04:31:54 nnaida24 kernel: bio: create slab <bio-0> at 0
Oct 18 04:31:54 nnaida24 kernel: NET: Registered protocol family 2
Oct 18 04:31:54 nnaida24 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct 18 04:31:54 nnaida24 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Oct 18 04:31:55 nnaida24 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Oct 18 04:31:55 nnaida24 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Oct 18 04:31:55 nnaida24 kernel: TCP reno registered
Oct 18 04:31:55 nnaida24 kernel: NET: Registered protocol family 1
Oct 18 04:31:56 nnaida24 kernel: ROMFS MTD (C) 2007 Red Hat, Inc.
Oct 18 04:31:56 nnaida24 kernel: msgmni has been set to 214
Oct 18 04:31:56 nnaida24 kernel: io scheduler noop registered
Oct 18 04:31:57 nnaida24 kernel: io scheduler anticipatory registered
Oct 18 04:31:57 nnaida24 kernel: io scheduler deadline registered
Oct 18 04:31:58 nnaida24 kernel: io scheduler cfq registered (default)
Oct 18 04:31:58 nnaida24 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Oct 18 04:31:58 nnaida24 kernel: 83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
Oct 18 04:31:58 nnaida24 kernel: console [ttyS0] enabled
Oct 18 04:31:58 nnaida24 kernel: brd: module loaded
Oct 18 04:31:59 nnaida24 kernel: loop: module loaded
Oct 18 04:31:59 nnaida24 kernel: Device Tree Probing 'ethernet'
Oct 18 04:31:59 nnaida24 kernel: xilinx_lltemac 81c00000.ethernet: MAC address is now  0: 4:a3:2a:d9:b6
Oct 18 04:31:59 nnaida24 kernel: xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
Oct 18 04:31:59 nnaida24 kernel: XLlTemac: DCR address: 0x80
Oct 18 04:32:00 nnaida24 kernel: XLlTemac: buffer descriptor size: 32768 (0x8000)
Oct 18 04:32:00 nnaida24 kernel: XLlTemac: Allocating DMA descriptors with kmalloc
Oct 18 04:32:00 nnaida24 kernel: XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
Oct 18 04:32:00 nnaida24 kernel: XTemac: PHY detected at address 7.
Oct 18 04:32:00 nnaida24 kernel: xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to
0xD1024000, irq=17
Oct 18 04:32:00 nnaida24 kernel: fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
Oct 18 04:32:00 nnaida24 kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 18 04:32:00 nnaida24 last message repeated 5 times
Oct 18 04:32:00 nnaida24 kernel: Using buffer write method
Oct 18 04:32:01 nnaida24 kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 18 04:32:01 nnaida24 kernel: cmdlinepart partition parsing not available
Oct 18 04:32:02 nnaida24 kernel: RedBoot partition parsing not available
Oct 18 04:32:02 nnaida24 kernel: Creating 5 MTD partitions on "fc000000.flash":
Oct 18 04:32:02 nnaida24 kernel: 0x000000000000-0x000000500000 : "golden_firmware"
Oct 18 04:32:02 nnaida24 kernel: 0x000000500000-0x000000800000 : "golden_kernel"
Oct 18 04:32:02 nnaida24 kernel: 0x000000800000-0x000000d00000 : "user_firmware"
Oct 18 04:32:02 nnaida24 kernel: 0x000000d00000-0x000000fe0000 : "user_kernel"
Oct 18 04:32:02 nnaida24 kernel: 0x000000fe0000-0x000001000000 : "env_variables"
Oct 18 04:32:02 nnaida24 kernel: xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
Oct 18 04:32:03 nnaida24 kernel: SPI: XIlinx spi: bus number now 32766
Oct 18 04:32:03 nnaida24 kernel: xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
Oct 18 04:32:03 nnaida24 rpcbind: cannot create socket for udp6
Oct 18 04:32:03 nnaida24 kernel: SPI: XIlinx spi: bus number now 32765
Oct 18 04:32:03 nnaida24 kernel: mice: PS/2 mouse device common for all mice
Oct 18 04:32:03 nnaida24 kernel: Device Tree Probing 'i2c'
Oct 18 04:32:03 nnaida24 kernel:  #0 at 0x81600000 mapped to 0xD1030000, irq=22
Oct 18 04:32:04 nnaida24 kernel: at24 0-0050: 1024 byte 24c08 EEPROM (writable)
Oct 18 04:32:04 nnaida24 kernel: TCP cubic registered
Oct 18 04:32:04 nnaida24 kernel: NET: Registered protocol family 17
Oct 18 04:32:04 nnaida24 kernel: RPC: Registered udp transport module.
Oct 18 04:32:04 nnaida24 kernel: RPC: Registered tcp transport module.
Oct 18 04:32:05 nnaida24 kernel: eth0: XLlTemac: Options: 0x3fa
Oct 18 04:32:05 nnaida24 rpcbind: cannot create socket for tcp6
Oct 18 04:32:05 nnaida24 kernel: eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
Oct 18 04:32:05 nnaida24 kernel: eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
Oct 18 04:32:05 nnaida24 kernel: eth0: XLlTemac: speed set to 1000Mb/s
Oct 18 04:32:05 nnaida24 kernel: eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
Oct 18 04:32:06 nnaida24 kernel: eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
Oct 18 04:32:06 nnaida24 kernel: Sending DHCP requests ., OK
Oct 18 04:32:06 nnaida24 kernel: IP-Config: Got DHCP answer from 10.1.2.250, my address is 10.1.2.24
Oct 18 04:32:06 nnaida24 kernel: IP-Config: Complete:
Oct 18 04:32:06 nnaida24 kernel:      device=eth0, addr=10.1.2.24, mask=255.255.255.0, gw=10.1.2.250,
Oct 18 04:32:06 nnaida24 kernel:      host=nnaida24, domain=, nis-domain=(none),
Oct 18 04:32:06 nnaida24 kernel:      bootserver=10.1.2.250, rootserver=10.1.2.250,
rootpath=/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida24,tcp
Oct 18 04:32:06 nnaida24 kernel: Looking up port of RPC 100003/2 on 10.1.2.250
Oct 18 04:32:06 nnaida24 kernel: Looking up port of RPC 100005/1 on 10.1.2.250
Oct 18 04:32:07 nnaida24 kernel: VFS: Mounted root (nfs filesystem) on device 0:12.
Oct 18 04:32:07 nnaida24 kernel: Freeing unused kernel memory: 168k init
Oct 18 04:32:10 nnaida24 xinetd[275]: IPv6 socket creation failed for service telnet, trying IPv4
Oct 18 04:32:10 nnaida24 xinetd[275]: IPv6 socket creation failed for service ftp, trying IPv4
Oct 18 04:32:10 nnaida24 xinetd[275]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in.
Oct 18 04:32:11 nnaida24 xinetd[275]: Started working: 2 available services
Oct 18 04:32:16 nnaida24 kernel: Trying to free nonexistent resource <0000000081000000-00000000811fffff>
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: driver assigned major number 254
Oct 18 04:32:22 nnaida24 kernel: Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: driver assigned major number 253
Oct 18 04:32:38 nnaida24 kernel: XAIDA: xaida_open:
Oct 18 04:32:38 nnaida24 kernel: AIDAMEM: aidamem_open:
Oct 18 04:43:16 nnaida24 xinetd[275]: START: telnet pid=395 from=10.1.2.250
-bash-3.2# tail messages
Oct 18 04:32:11 nnaida24 xinetd[275]: Started working: 2 available services
Oct 18 04:32:16 nnaida24 kernel: Trying to free nonexistent resource <0000000081000000-00000000811fffff>
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: driver assigned major number 254
Oct 18 04:32:22 nnaida24 kernel: Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: driver assigned major number 253
Oct 18 04:32:38 nnaida24 kernel: XAIDA: xaida_open:
Oct 18 04:32:38 nnaida24 kernel: AIDAMEM: aidamem_open:
Oct 18 04:43:16 nnaida24 xinetd[275]: START: telnet pid=395 from=10.1.2.250
-bash-3.2# tail messages
Oct 18 04:32:16 nnaida24 kernel: Trying to free nonexistent resource <0000000081000000-00000000811fffff>
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: driver assigned major number 254
Oct 18 04:32:22 nnaida24 kernel: Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: driver assigned major number 253
Oct 18 04:32:38 nnaida24 kernel: XAIDA: xaida_open:
Oct 18 04:32:38 nnaida24 kernel: AIDAMEM: aidamem_open:
Oct 18 04:43:16 nnaida24 xinetd[275]: START: telnet pid=395 from=10.1.2.250
Oct 18 04:52:07 nnaida24 kernel: XAIDA: xaida_open:
-bash-3.2# tail messages
Oct 18 04:32:16 nnaida24 kernel: Trying to free nonexistent resource <0000000081000000-00000000811fffff>
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
Oct 18 04:32:16 nnaida24 kernel: XAIDA: xaida: driver assigned major number 254
Oct 18 04:32:22 nnaida24 kernel: Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
Oct 18 04:32:22 nnaida24 kernel: AIDAMEM: aidamem: driver assigned major number 253
Oct 18 04:32:38 nnaida24 kernel: XAIDA: xaida_open:
Oct 18 04:32:38 nnaida24 kernel: AIDAMEM: aidamem_open:
Oct 18 04:43:16 nnaida24 xinetd[275]: START: telnet pid=395 from=10.1.2.250
Oct 18 04:52:07 nnaida24 kernel: XAIDA: xaida_open:

       Pi monitor browser - see attachment 1 - 24x FEE64 'not finished'

       Start httpd for data acquisition, start web browser for AIDA DAQ

       DAQ RESET and SETUP produce pop up messages - see attachments 2 & 3

       Manual ReSYNC required

       All system wide checks OK
        *except* synchronise ASIC clocks which fails for *all* FEE64s
        which may be correct for current firmware synchronising FEE64 clock and ASIC readout clock - to be checked

12.11 No FEE64 temperatures - see attachment 4

12.14 Detector bias and leakage currents OK - see attachments 5 & 6
      Ambient temperature +23.1 deg C, d.p. +8.0 deg C, RH 38%

12.20 By hand, the temperatures of the FEE64 mezzanines feel OK

13:50 By hand, the temperatures of the FEE64 mezzanines still feel OK

13:53 FEE64 Temperature displays back online see attachment 7

13:58 System wide checks ok

14:00 Pulser had been switched off. Turned on, amplitude at 90000, Frequency set to 25Hz scale

14:04 ASIC load check ok

14:20 Statistics with pulser running. All reasonable though nnaida13 about double the rest. - Attachment 8

14:45 Pulser widths taken using 1.8.L spectra - attachments 9 & 10
      Crane was running whilst pulser peaks were forming

15:00 Waveforms for p and n sides - attachments 11 - 14

      For comparisons for stats and waveforms see elog entry https://elog.ph.ed.ac.uk/AIDA/668 


16:32 DAQ started writing to file in /TapeData/Oct17 with R1_0

16:41 Layouts 1 and 2 - attachments 15-17

17:30 Analysis of R1_7 - attachment 18

17:40 Spectra of ADC data items /s and DSSD rates as a function of time - attachments 18 & 19 respectively

17:57 Bias and leakage currents ok - attachment 24
      System wide checks ok though nnaida24 has about 9000kb less memory
      System left running

18:13 Pulser event in lec data plot - attachments 20 & 21
      Discriminator spectra - attachment 22

> 
> The DAQ Run Control 'zero all histograms' function appears to have stopped working
> - an issue related to the new RunControl/sys.tcl ... ?
> 
> See https://elog.ph.ed.ac.uk/AIDA/662

Fault discovered and file edited at Daresbury.
A piece of random text was in the " zero histograms" process.

The repaired file has been installed in RIKEN.

> 
> The DAQ Run Control 'zero all histograms' function appears to have stopped working
> - an issue related to the new RunControl/sys.tcl ... ?
> 
> See https://elog.ph.ed.ac.uk/AIDA/662

Fault discovered and file edited at Daresbury.
A piece of random text was in the " zero histograms" process.

aidas1> df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_aidas1-lv_root
                       50G   37G   11G  78% /
tmpfs                 3.9G  1.1G  2.8G  29% /dev/shm
/dev/sda1             477M   77M  376M  17% /boot
/dev/mapper/vg_aidas1-lv_home
                      860G  580G  236G  72% /home
/dev/mapper/Data1-data10
                      7.7T  5.7T  1.7T  78% /data10
/dev/sdg2             7.3T  5.3T  2.0T  73% /ntfs
aidas1> cd /ntfs
/ntfs
aidas1> du -h
512	./$RECYCLE.BIN/S-1-5-21-3592705683-1703124337-2829554695-1001
512	./$RECYCLE.BIN
2.0G	./.Trash-1729186/files
512	./.Trash-1729186/info
2.0G	./.Trash-1729186
1.7T	./PE16
101G	./RIBF03R1/BigRIPS
2.2M	./RIBF03R1/BRIKEN/1622FallonPreparation/CheckCal_161122_2208_003
25K	./RIBF03R1/BRIKEN/1622FallonPreparation/CheckCal_161124_1215
8.2G	./RIBF03R1/BRIKEN/1622FallonPreparation
500K	./RIBF03R1/BRIKEN/1626FallonParasitic/Conf
120K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id204_id184/ELOG_RIBF123_id204_id184_files
164K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id204_id184
788K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id224_id205/ELOG_RIBF123_id224_id204_files
844K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id224_id205
19M	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123
313M	./RIBF03R1/BRIKEN/1626FallonParasitic/FallonOnlines
187G	./RIBF03R1/BRIKEN/1626FallonParasitic
28K	./RIBF03R1/BRIKEN/BRIKENrootTools
195G	./RIBF03R1/BRIKEN
71M	./RIBF03R1/RIBF03R1_logs
2.5T	./RIBF03R1
522G	./RIBF123R1/BigRIPS_oct16ur
32G	./RIBF123R1/BRIKEN/BRIKEN/data/1611BRIKEN/161107Parasitic
3.2G	./RIBF123R1/BRIKEN/BRIKEN/data/1611BRIKEN/Briken252Cf
35G	./RIBF123R1/BRIKEN/BRIKEN/data/1611BRIKEN
630M	./RIBF123R1/BRIKEN/BRIKEN/data/analysis/161111
630M	./RIBF123R1/BRIKEN/BRIKEN/data/analysis
36G	./RIBF123R1/BRIKEN/BRIKEN/data
36G	./RIBF123R1/BRIKEN/BRIKEN
36G	./RIBF123R1/BRIKEN
100M	./RIBF123R1/RIBF123R1_logs
1.2T	./RIBF123R1
512	./Seagate/Registration
512	./Seagate
0	./Start_Here_Mac.app/Contents/Frameworks
26M	./Start_Here_Mac.app/Contents/MacOS
304K	./Start_Here_Mac.app/Contents/Resources
4.0K	./Start_Here_Mac.app/Contents/_CodeSignature
26M	./Start_Here_Mac.app/Contents
26M	./Start_Here_Mac.app
1.0K	./System Volume Information
5.3T	.

N.B. data directory RIBF148 incomplete

aidas1> df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_aidas1-lv_root
                       50G   37G   11G  78% /
tmpfs                 3.9G  1.1G  2.8G  29% /dev/shm
/dev/sda1             477M   77M  376M  17% /boot
/dev/mapper/vg_aidas1-lv_home
                      860G  580G  236G  72% /home
/dev/mapper/Data1-data10
                      7.7T  5.7T  1.7T  78% /data10
/dev/sdg2             7.3T  7.0T  352G  96% /ntfs
aidas1> cd /ntfs
/ntfs
aidas1> du -h
231G	./May2017
175G	./RIBF127R1/bigrips
29G	./RIBF127R1/briken
5.6G	./RIBF127R1/rootfiles/bigrips
5.6G	./RIBF127R1/rootfiles
2.3T	./RIBF127R1
0	./RIBF128/bigrips/run1124.ridf
0	./RIBF128/bigrips/run1125.ridf
0	./RIBF128/bigrips/run1126.ridf
0	./RIBF128/bigrips/run1127.ridf
142G	./RIBF128/bigrips
32G	./RIBF128/briken
19G	./RIBF128/rootfiles/aida
3.2G	./RIBF128/rootfiles/bigrips
21G	./RIBF128/rootfiles/briken
647K	./RIBF128/rootfiles/merged/config
47M	./RIBF128/rootfiles/merged/log
243G	./RIBF128/rootfiles/merged
285G	./RIBF128/rootfiles
212K	./RIBF128/scripts/aidasort/build-LuckyDoll/config/thresholdoptimization
224K	./RIBF128/scripts/aidasort/build-LuckyDoll/config/thresholdtablesbriken2017
753K	./RIBF128/scripts/aidasort/build-LuckyDoll/config
32K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/3.6.1/CompilerIdC
32K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/3.6.1/CompilerIdCXX
101K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/3.6.1
2.9M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/aida2histbkg.dir
3.5M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/aida2histcalib.dir
2.4M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/AIDAbkg.dir
2.4M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/AIDAcal.dir
2.4M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/AIDAfullnew.dir
3.4M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/aidafullnew.dir
3.6M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/aidanew.dir
2.4M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/AIDApartialnew.dir
3.5M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/aidapartialnew.dir
2.4M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/AIDAsnew.dir
0	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/CMakeTmp
9.0K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/G__AIDAbkg.dir
9.0K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/G__AIDAcal.dir
9.0K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/G__AIDAfullnew.dir
13K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/G__AIDApartialnew.dir
13K	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles/G__AIDAsimplenew.dir
29M	./RIBF128/scripts/aidasort/build-LuckyDoll/CMakeFiles
21M	./RIBF128/scripts/aidasort/build-LuckyDoll/ecalib
1.2M	./RIBF128/scripts/aidasort/build-LuckyDoll/list
4.6G	./RIBF128/scripts/aidasort/build-LuckyDoll
0	./RIBF128/scripts/aidasort/LuckyDoll/.git/branches
34K	./RIBF128/scripts/aidasort/LuckyDoll/.git/hooks
512	./RIBF128/scripts/aidasort/LuckyDoll/.git/info
1.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/logs/refs/heads
1.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/logs/refs/remotes/origin
1.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/logs/refs/remotes
2.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/logs/refs
3.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/logs
4.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/0a
512	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/3e
512	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/49
8.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/68
8.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/6b
8.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/7e
8.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/8b
12K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/9a
512	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/c1
4.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/d8
4.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/ef
4.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/fb
0	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/info
2.2M	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects/pack
2.2M	./RIBF128/scripts/aidasort/LuckyDoll/.git/objects
512	./RIBF128/scripts/aidasort/LuckyDoll/.git/refs/heads
1.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/refs/remotes/origin
1.0K	./RIBF128/scripts/aidasort/LuckyDoll/.git/refs/remotes
0	./RIBF128/scripts/aidasort/LuckyDoll/.git/refs/tags
1.5K	./RIBF128/scripts/aidasort/LuckyDoll/.git/refs
2.3M	./RIBF128/scripts/aidasort/LuckyDoll/.git
586K	./RIBF128/scripts/aidasort/LuckyDoll/LuckyDollReader
128K	./RIBF128/scripts/aidasort/LuckyDoll/temp
140K	./RIBF128/scripts/aidasort/LuckyDoll/txt/config/cal_nogainadjust
100K	./RIBF128/scripts/aidasort/LuckyDoll/txt/config/old
400K	./RIBF128/scripts/aidasort/LuckyDoll/txt/config
92K	./RIBF128/scripts/aidasort/LuckyDoll/txt/old
616K	./RIBF128/scripts/aidasort/LuckyDoll/txt
5.2M	./RIBF128/scripts/aidasort/LuckyDoll
4.6G	./RIBF128/scripts/aidasort
0	./RIBF128/scripts/bigripssort/anaroot/.git/branches
34K	./RIBF128/scripts/bigripssort/anaroot/.git/hooks
512	./RIBF128/scripts/bigripssort/anaroot/.git/info
25K	./RIBF128/scripts/bigripssort/anaroot/.git/logs/refs/heads
25K	./RIBF128/scripts/bigripssort/anaroot/.git/logs/refs
37K	./RIBF128/scripts/bigripssort/anaroot/.git/logs
592K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/00
23K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/01
78K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/02
93K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/03
190K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/04
9.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/05
115K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/06
27K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/07
63K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/08
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/09
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/0a
68K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/0b
214K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/0c
54K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/0d
69K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/0e
576K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/0f
162K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/10
10K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/11
13K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/12
69K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/13
44K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/14
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/15
3.5M	./RIBF128/scripts/bigripssort/anaroot/.git/objects/16
89K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/17
422K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/18
81K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/19
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/1a
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/1b
12K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/1c
33K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/1d
13K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/1e
78K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/1f
1.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/20
9.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/21
93K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/22
205K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/23
114K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/24
112K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/25
13K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/26
5.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/27
63K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/28
23K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/29
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/2a
6.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/2b
13K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/2c
29K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a3
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a4
114K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a5
1.2M	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a6
102K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a7
2.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a8
130K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a9
94K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/aa
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ab
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ac
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ad
24K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ae
1.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/af
477K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b0
14K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b1
28K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b2
62K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b3
19K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b4
294K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b5
49K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b6
93K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b7
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b8
175K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/b9
84K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ba
98K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/bb
57K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/bc
118K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/bd
33K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/be
14K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/bf
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c0
58K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c1
29K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c2
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c3
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c4
194K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c5
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c6
822K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c7
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c8
172K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/c9
10K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ca
333K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/cb
134K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/cc
14K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/cd
10K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/5f
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/60
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/61
37K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/62
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/63
49K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/64
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/65
57K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/66
418K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/67
26K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/68
161K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/69
1.2M	./RIBF128/scripts/bigripssort/anaroot/.git/objects/6a
298K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/6b
84K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/6c
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/6d
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/6e
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/6f
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/70
512	./RIBF128/scripts/bigripssort/anaroot/.git/objects/71
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/72
14K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/73
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/74
111K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/75
33K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/76
26K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/77
6.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/78
455K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/79
6.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/7a
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/7b
32K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/7c
128K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/7d
512	./RIBF128/scripts/bigripssort/anaroot/.git/objects/cf
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d0
13K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d1
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d2
333K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d3
512	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d4
20K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d5
45K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d6
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d7
196K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d8
88K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/d9
9.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/da
126K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/db
68K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/dc
26K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/dd
9.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/de
253K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/df
124K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e0
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e1
24K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e2
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e3
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e4
10K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e5
1.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e6
34K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/2e
33K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/2f
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/30
65K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/31
32K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/32
38K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/33
27K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/34
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/35
23K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/36
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/37
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/38
1.8M	./RIBF128/scripts/bigripssort/anaroot/.git/objects/39
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/3a
69K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/3b
329K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/3c
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/3d
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/3e
13K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/3f
41K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/40
74K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/41
206K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/42
152K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/43
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/44
114K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/45
81K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/2d
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/46
116K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/5e
1.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/7e
26K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a2
9.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ce
9.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e7
26K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/7f
4.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/80
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/81
146K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/82
32K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/83
9.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/84
134K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/85
20K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/86
5.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/87
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/88
5.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/89
29K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/8a
95K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/8b
41K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/8c
8.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/8d
105K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/8e
74K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/8f
31K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/90
5.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/91
56K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/92
153K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/93
308K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/94
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/95
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/96
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/97
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/98
105K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/9a
14K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/9b
11K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/9c
58K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/9d
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/9e
103K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/9f
77K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a0
1.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/a1
56K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e8
68K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/e9
46K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ea
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/eb
40K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ec
177K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ed
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ee
129K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ef
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f0
128K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f1
124K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f2
21K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f3
1.1M	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f4
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f5
145K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f6
19K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f7
22K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f8
17K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/f9
168K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/fa
48K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/fb
53K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/fc
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/fd
49K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/fe
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/ff
0	./RIBF128/scripts/bigripssort/anaroot/.git/objects/info
0	./RIBF128/scripts/bigripssort/anaroot/.git/objects/pack
95K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/47
4.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/48
58K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/49
38K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/4a
9.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/4b
90K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/4c
79K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/4d
37K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/4e
19K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/4f
53K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/50
53K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/51
14K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/52
5.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/54
5.0K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/55
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/56
318K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/57
18K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/58
92K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/59
95K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/5a
71K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/5b
8.5K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/5c
25K	./RIBF128/scripts/bigripssort/anaroot/.git/objects/5d
26M	./RIBF128/scripts/bigripssort/anaroot/.git/objects
7.0K	./RIBF128/scripts/bigripssort/anaroot/.git/refs/heads
0	./RIBF128/scripts/bigripssort/anaroot/.git/refs/tags
7.0K	./RIBF128/scripts/bigripssort/anaroot/.git/refs
26M	./RIBF128/scripts/bigripssort/anaroot/.git
1.4M	./RIBF128/scripts/bigripssort/anaroot/autom4te.cache
512	./RIBF128/scripts/bigripssort/anaroot/example/AnaLoop/cut
13K	./RIBF128/scripts/bigripssort/anaroot/example/AnaLoop/wAnafile
44K	./RIBF128/scripts/bigripssort/anaroot/example/AnaLoop/wROOT/BigRIPS
53K	./RIBF128/scripts/bigripssort/anaroot/example/AnaLoop/wROOT
66K	./RIBF128/scripts/bigripssort/anaroot/example/AnaLoop
57K	./RIBF128/scripts/bigripssort/anaroot/example/Go4/samples/anafile
12K	./RIBF128/scripts/bigripssort/anaroot/example/Go4/samples/fadc
57K	./RIBF128/scripts/bigripssort/anaroot/example/Go4/samples/samurai
126K	./RIBF128/scripts/bigripssort/anaroot/example/Go4/samples
182K	./RIBF128/scripts/bigripssort/anaroot/example/Go4
8.0K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/BigRIPS/1pass
16K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/BigRIPS/2pass
20K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/BigRIPS/mktree
48K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/BigRIPS
60K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/DALI
57K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/EURICA
21K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/Online
33K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/SAMURAI/Analysis
22K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/SAMURAI/RKtrace
110K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/SAMURAI
5.0K	./RIBF128/scripts/bigripssort/anaroot/example/Macros/standalone
342K	./RIBF128/scripts/bigripssort/anaroot/example/Macros
590K	./RIBF128/scripts/bigripssort/anaroot/example
139K	./RIBF128/scripts/bigripssort/anaroot/gui
1.1M	./RIBF128/scripts/bigripssort/anaroot/include
28M	./RIBF128/scripts/bigripssort/anaroot/lib
64M	./RIBF128/scripts/bigripssort/anaroot/run/Calc
1.2G	./RIBF128/scripts/bigripssort/anaroot/run/calib
932K	./RIBF128/scripts/bigripssort/anaroot/run/scripts
2.0M	./RIBF128/scripts/bigripssort/anaroot/run/db
8.0M	./RIBF128/scripts/bigripssort/anaroot/run/figures
35K	./RIBF128/scripts/bigripssort/anaroot/run/matrix
2.9G	./RIBF128/scripts/bigripssort/anaroot/run
29K	./RIBF128/scripts/bigripssort/anaroot/scripts
26K	./RIBF128/scripts/bigripssort/anaroot/sources/.libs
28K	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Core/.deps
6.3M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Core/.libs
38K	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Core/include
3.9M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Core/src
11M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Core
44K	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/EncExample/.deps
6.0M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/EncExample/.libs
136K	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/EncExample/include
4.8M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/EncExample/src
12M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/EncExample
32K	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Example/.deps
1.8M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Example/.libs
40K	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Example/include
1.4M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Example/src
3.5M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop/Example
27M	./RIBF128/scripts/bigripssort/anaroot/sources/AnaLoop
32K	./RIBF128/scripts/bigripssort/anaroot/sources/Core/.deps
3.1M	./RIBF128/scripts/bigripssort/anaroot/sources/Core/.libs
225K	./RIBF128/scripts/bigripssort/anaroot/sources/Core/include
1.2M	./RIBF128/scripts/bigripssort/anaroot/sources/Core/src
5.2M	./RIBF128/scripts/bigripssort/anaroot/sources/Core
24K	./RIBF128/scripts/bigripssort/anaroot/sources/Nadeko/.deps
1.2M	./RIBF128/scripts/bigripssort/anaroot/sources/Nadeko/.libs
41K	./RIBF128/scripts/bigripssort/anaroot/sources/Nadeko/include
1.6M	./RIBF128/scripts/bigripssort/anaroot/sources/Nadeko/src
2.9M	./RIBF128/scripts/bigripssort/anaroot/sources/Nadeko
28K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/BigRIPS/.deps
7.4M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/BigRIPS/.libs
162K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/BigRIPS/include
1.8M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/BigRIPS/src
11M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/BigRIPS
24K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/CATANA/.deps
926K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/CATANA/.libs
20K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/CATANA/include
236K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/CATANA/src
1.4M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/CATANA
24K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/DALI/.deps
942K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/DALI/.libs
16K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/DALI/include
240K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/DALI/src
1.4M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/DALI
24K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/ESPRI/.deps
3.9M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/ESPRI/.libs
92K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/ESPRI/include
1.1M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/ESPRI/src
5.7M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/ESPRI
512	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/MINOS/.deps
76K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/MINOS/include
60K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/MINOS/src
197K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/MINOS
36K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/SAMURAI/.deps
22M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/SAMURAI/.libs
285K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/SAMURAI/include
14M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/SAMURAI/src
38M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/SAMURAI
24K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/WINDS/.deps
2.0M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/WINDS/.libs
28K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/WINDS/include
684K	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/WINDS/src
2.9M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction/WINDS
59M	./RIBF128/scripts/bigripssort/anaroot/sources/Reconstruction
94M	./RIBF128/scripts/bigripssort/anaroot/sources
3.0G	./RIBF128/scripts/bigripssort/anaroot
72K	./RIBF128/scripts/bigripssort/PIDcount
0	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/branches
31K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/hooks
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/info
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/logs/refs/heads
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/logs/refs
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/logs
152K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/00
58K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/01
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/02
137K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/03
78K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/04
42K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/05
11K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/06
19K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/07
55K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/08
53K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/09
50K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/0a
60K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/0b
27K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/0c
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/0d
41K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/0e
556K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/0f
41K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/10
86K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/11
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/12
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/13
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/14
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/15
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/16
81K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/17
48K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/18
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/19
8.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/1a
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/1b
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/1c
66K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/1d
64K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/1e
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/1f
742K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/20
18K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/21
11K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/22
273K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/23
37K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/24
44K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/25
89K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/26
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/27
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/28
21K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/29
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/2a
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/2b
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/2c
405K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a3
57K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a4
169K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a5
50K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a6
2.9M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a7
9.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a8
130K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a9
22K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/aa
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ab
31K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ac
18K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ad
64K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ae
58K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b0
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b1
24K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b2
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b3
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b4
262K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b5
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b6
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b7
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b8
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/b9
81K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ba
290K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/bb
309K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/bc
29K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/bd
37K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/be
35K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/bf
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c0
154K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c1
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c2
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c3
77K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c4
218K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c5
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c6
62K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c7
19K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c8
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/c9
38K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ca
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/cb
53K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/cc
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/cd
41K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ce
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/cf
18K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/5f
93K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/60
170K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/61
193K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/62
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/64
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/65
6.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/67
354K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/68
745K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/69
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/6a
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/6b
96K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/6c
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/6d
101K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/6e
22K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/6f
29K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/70
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/71
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/72
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/73
125K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/74
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/75
80K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/76
22K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/77
1.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/78
62K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/79
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/7a
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/7b
36K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/7c
36K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/7d
58K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/7e
166K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/7f
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/80
45K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/81
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/82
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d1
53K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d2
116K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d3
137K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d4
92K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d5
41K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d6
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d7
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d8
18K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d9
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/da
22K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/db
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/dc
40K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/dd
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/de
73K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/df
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e0
165K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e1
52K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e2
73K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e3
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e4
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e5
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e6
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e7
821K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/2e
9.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/2f
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/30
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/31
21K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/32
9.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/33
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/34
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/35
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/36
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/37
4.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/38
9.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/39
18K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/3a
37K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/3b
109K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/3c
81K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/3d
34K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/3e
161K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/3f
2.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/40
5.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/41
46K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/42
11K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/43
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/44
49K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/45
37K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/46
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/2d
391K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/47
32K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/5e
128K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/83
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a2
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/d0
534K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e8
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/84
21K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/85
452K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/86
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/87
65K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/88
29K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/89
66K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/8a
9.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/8b
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/8c
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/8d
513K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/8e
32K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/8f
62K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/90
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/91
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/92
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/93
32K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/94
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/95
93K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/96
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/97
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/98
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/99
195K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/9a
326K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/9b
87K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/9c
94K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/9d
14K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/9e
29K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/9f
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a0
37K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/a1
52K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/e9
6.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ea
93K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/eb
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ec
37K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ed
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ee
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ef
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f0
8.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f1
57K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f2
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f3
8.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f4
57K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f5
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f6
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f7
38K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f8
8.5K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/f9
148K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/fa
833K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/fb
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/fc
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/fd
166K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/fe
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/ff
0	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/info
0	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/pack
1.9M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/48
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/49
77K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/4a
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/4b
21K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/4c
18K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/4d
56K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/4e
50K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/4f
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/50
9.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/51
103K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/52
8.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/53
4.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/54
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/55
25K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/56
10K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/57
49K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/58
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/59
19K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/5a
86K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/5b
17K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/5c
320K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects/5d
22M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/objects
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/refs/heads
0	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/refs/tags
1.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git/refs
22M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/.git
2.1M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/autom4te.cache
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/AnaLoop/cut
13K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/AnaLoop/wAnafile
44K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/AnaLoop/wROOT/BigRIPS
53K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/AnaLoop/wROOT
66K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/AnaLoop
57K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Go4/samples/anafile
12K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Go4/samples/fadc
57K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Go4/samples/samurai
126K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Go4/samples
182K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Go4
8.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/BigRIPS/1pass
16K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/BigRIPS/2pass
20K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/BigRIPS/mktree
48K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/BigRIPS
60K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/DALI
57K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/EURICA
21K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/Online
33K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/SAMURAI/Analysis
22K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/SAMURAI/RKtrace
110K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/SAMURAI
5.0K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros/standalone
342K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example/Macros
590K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/example
139K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/gui
1.1M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/include
25M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/lib
2.0M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/run/db
35K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/run/matrix
270K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/run/scripts
2.5M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/run
29K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/scripts
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Core/.deps
5.7M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Core/.libs
38K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Core/include
92K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Core/src
6.3M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Core
44K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/EncExample/.deps
5.3M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/EncExample/.libs
136K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/EncExample/include
220K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/EncExample/src
6.7M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/EncExample
32K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Example/.deps
1.5M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Example/.libs
40K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Example/include
88K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Example/src
2.0M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop/Example
15M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/AnaLoop
32K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Core/.deps
1.4M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Core/.libs
225K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Core/include
886K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Core/src
3.2M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Core
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Nadeko/.deps
1.1M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Nadeko/.libs
41K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Nadeko/include
116K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Nadeko/src
1.4M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Nadeko
32K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/BigRIPS/.deps
6.6M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/BigRIPS/.libs
162K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/BigRIPS/include
156K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/BigRIPS/src
7.9M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/BigRIPS
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/CATANA/.deps
838K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/CATANA/.libs
20K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/CATANA/include
16K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/CATANA/src
1.1M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/CATANA
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/DALI/.deps
850K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/DALI/.libs
16K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/DALI/include
20K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/DALI/src
1.1M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/DALI
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/ESPRI/.deps
3.5M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/ESPRI/.libs
92K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/ESPRI/include
116K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/ESPRI/src
4.3M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/ESPRI
512	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/MINOS/.deps
76K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/MINOS/include
60K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/MINOS/src
197K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/MINOS
40K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/SAMURAI/.deps
20M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/SAMURAI/.libs
285K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/SAMURAI/include
449K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/SAMURAI/src
22M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/SAMURAI
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/WINDS/.deps
1.8M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/WINDS/.libs
28K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/WINDS/include
24K	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/WINDS/src
2.0M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction/WINDS
39M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources/Reconstruction
58M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03/sources
112M	./RIBF128/scripts/bigripssort/tmp/anaroot_ana03
112M	./RIBF128/scripts/bigripssort/tmp
0	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/branches
34K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/hooks
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/info
4.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/logs/refs/heads
6.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/logs/refs/remotes/origin
6.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/logs/refs/remotes
10K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/logs/refs
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/logs
592K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/00
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/01
78K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/02
93K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/03
190K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/04
9.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/05
111K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/06
27K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/07
63K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/08
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/09
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/0a
68K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/0b
214K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/0c
54K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/0d
69K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/0e
576K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/0f
162K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/10
10K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/11
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/12
68K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/13
44K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/14
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/15
3.5M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/16
89K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/17
422K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/18
81K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/19
4.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/1a
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/1b
12K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/1c
33K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/1d
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/1e
78K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/1f
1.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/20
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/21
93K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/22
205K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/23
114K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/24
112K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/25
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/26
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/27
62K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/28
23K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/29
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/2a
6.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/2b
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/2c
29K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a3
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a4
114K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a5
1.2M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a6
97K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a7
2.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a8
130K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a9
94K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/aa
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ab
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ac
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ad
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ae
1.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/af
477K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b0
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b1
28K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b2
62K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b3
19K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b4
294K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b5
49K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b6
93K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b7
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b8
175K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/b9
84K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ba
98K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/bb
57K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/bc
118K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/bd
33K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/be
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/bf
8.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c0
58K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c1
29K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c2
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c3
9.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c4
194K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c5
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c6
822K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c7
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c8
172K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/c9
9.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ca
325K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/cb
134K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/cc
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/cd
10K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/5f
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/60
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/61
37K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/62
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/63
49K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/64
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/65
57K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/66
418K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/67
26K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/68
161K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/69
1.2M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/6a
298K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/6b
84K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/6c
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/6d
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/6e
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/6f
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/70
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/71
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/72
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/73
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/74
110K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/75
33K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/76
26K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/77
6.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/78
455K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/79
6.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/7a
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/7b
32K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/7c
128K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/7d
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/cf
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d0
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d1
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d2
333K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d3
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d4
20K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d5
45K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d6
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d7
196K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d8
80K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/d9
9.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/da
118K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/db
68K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/dc
26K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/dd
9.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/de
253K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/df
124K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e0
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e1
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e2
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e3
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e4
10K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e5
1.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e6
30K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/2e
33K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/2f
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/30
65K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/31
32K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/32
38K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/33
27K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/34
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/35
23K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/36
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/37
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/38
1.8M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/39
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/3a
69K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/3b
329K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/3c
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/3d
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/3e
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/3f
41K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/40
74K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/41
206K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/42
152K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/43
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/44
114K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/45
81K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/2d
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/46
116K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/5e
1.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/7e
26K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a2
9.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ce
9.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e7
26K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/7f
4.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/80
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/81
146K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/82
32K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/83
9.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/84
134K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/85
20K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/86
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/87
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/88
5.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/89
29K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/8a
93K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/8b
41K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/8c
8.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/8d
105K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/8e
74K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/8f
31K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/90
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/91
56K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/92
153K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/93
308K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/94
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/95
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/96
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/97
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/98
105K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/9a
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/9b
11K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/9c
58K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/9d
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/9e
102K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/9f
77K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a0
1.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/a1
56K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e8
68K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/e9
46K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ea
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/eb
40K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ec
177K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ed
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ee
125K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ef
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f0
120K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f1
124K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f2
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f3
1.1M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f4
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f5
140K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f6
19K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f7
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f8
17K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/f9
168K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/fa
48K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/fb
53K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/fc
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/fd
49K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/fe
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/ff
0	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/info
0	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/pack
95K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/47
4.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/48
57K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/49
38K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/4a
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/4b
90K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/4c
79K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/4d
37K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/4e
19K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/4f
53K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/50
53K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/51
14K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/52
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/54
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/55
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/56
318K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/57
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/58
92K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/59
95K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/5a
71K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/5b
8.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/5c
25K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects/5d
26M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/objects
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/refs/heads
2.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/refs/remotes/origin
2.5K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/refs/remotes
0	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/refs/tags
3.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git/refs
26M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/.git
1.4M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/autom4te.cache
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/AnaLoop/cut
13K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/AnaLoop/wAnafile
44K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/AnaLoop/wROOT/BigRIPS
53K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/AnaLoop/wROOT
66K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/AnaLoop
57K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Go4/samples/anafile
12K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Go4/samples/fadc
57K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Go4/samples/samurai
126K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Go4/samples
182K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Go4
8.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/BigRIPS/1pass
16K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/BigRIPS/2pass
20K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/BigRIPS/mktree
48K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/BigRIPS
60K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/DALI
57K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/EURICA
21K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/Online
33K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/SAMURAI/Analysis
22K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/SAMURAI/RKtrace
110K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/SAMURAI
5.0K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros/standalone
342K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example/Macros
590K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/example
139K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/gui
2.0M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/run/db
35K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/run/matrix
50M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/run/root
322K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/run/scripts
1.5G	./RIBF128/scripts/bigripssort/work/Ag/anaroot/run
29K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/scripts
18K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/.libs
28K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Core/.deps
6.3M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Core/.libs
38K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Core/include
3.9M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Core/src
11M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Core
44K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/EncExample/.deps
6.0M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/EncExample/.libs
136K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/EncExample/include
4.8M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/EncExample/src
12M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/EncExample
32K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Example/.deps
1.8M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Example/.libs
40K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Example/include
1.4M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Example/src
3.5M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop/Example
27M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/AnaLoop
32K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Core/.deps
3.1M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Core/.libs
225K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Core/include
1.2M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Core/src
5.2M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Core
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Nadeko/.deps
1.2M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Nadeko/.libs
41K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Nadeko/include
1.6M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Nadeko/src
2.9M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Nadeko
28K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/BigRIPS/.deps
7.4M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/BigRIPS/.libs
162K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/BigRIPS/include
1.8M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/BigRIPS/src
11M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/BigRIPS
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/CATANA/.deps
926K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/CATANA/.libs
20K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/CATANA/include
236K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/CATANA/src
1.4M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/CATANA
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/DALI/.deps
942K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/DALI/.libs
16K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/DALI/include
240K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/DALI/src
1.4M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/DALI
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/ESPRI/.deps
3.9M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/ESPRI/.libs
92K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/ESPRI/include
1.1M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/ESPRI/src
5.7M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/ESPRI
512	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/MINOS/.deps
76K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/MINOS/include
60K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/MINOS/src
197K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/MINOS
36K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/SAMURAI/.deps
22M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/SAMURAI/.libs
285K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/SAMURAI/include
14M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/SAMURAI/src
38M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/SAMURAI
24K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/WINDS/.deps
2.0M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/WINDS/.libs
28K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/WINDS/include
684K	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/WINDS/src
2.9M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction/WINDS
59M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources/Reconstruction
94M	./RIBF128/scripts/bigripssort/work/Ag/anaroot/sources
1.6G	./RIBF128/scripts/bigripssort/work/Ag/anaroot
1.6G	./RIBF128/scripts/bigripssort/work/Ag
0	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/branches
34K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/hooks
512	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/info
4.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/logs/refs/heads
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/logs/refs/remotes/origin
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/logs/refs/remotes
5.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/logs/refs
9.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/logs
592K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/00
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/01
74K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/02
93K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/03
190K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/04
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/05
111K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/06
27K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/07
63K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/08
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/09
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/0a
68K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/0b
214K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/0c
54K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/0d
69K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/0e
576K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/0f
162K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/10
10K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/11
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/12
68K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/13
44K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/14
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/15
3.5M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/16
89K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/17
422K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/18
81K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/19
4.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/1a
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/1b
12K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/1c
29K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/1d
13K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/1e
78K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/1f
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/20
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/21
93K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/22
205K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/23
114K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/24
112K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/25
13K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/26
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/27
62K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/28
23K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/29
13K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/2a
6.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/2b
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/2c
29K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a3
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a4
114K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a5
1.2M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a6
97K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a7
2.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a8
130K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a9
94K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/aa
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ab
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ac
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ad
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ae
1.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/af
477K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b0
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b1
28K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b2
62K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b3
19K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b4
294K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b5
49K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b6
85K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b7
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b8
175K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/b9
84K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ba
98K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/bb
57K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/bc
118K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/bd
33K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/be
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/bf
8.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c0
58K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c1
29K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c2
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c3
9.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c4
194K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c5
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c6
822K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c7
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c8
172K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/c9
10K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ca
325K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/cb
134K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/cc
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/cd
10K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/5f
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/60
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/61
37K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/62
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/63
49K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/64
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/65
57K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/66
418K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/67
26K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/68
161K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/69
1.2M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/6a
298K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/6b
84K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/6c
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/6d
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/6e
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/6f
25K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/70
512	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/71
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/72
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/73
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/74
111K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/75
29K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/76
26K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/77
6.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/78
455K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/79
6.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/7a
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/7b
32K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/7c
128K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/7d
512	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/cf
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d0
13K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d1
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d2
325K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d3
512	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d4
20K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d5
45K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d6
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d7
196K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d8
80K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/d9
9.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/da
118K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/db
68K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/dc
26K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/dd
9.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/de
253K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/df
124K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e0
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e1
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e2
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e3
25K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e4
10K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e5
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e6
30K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/2e
33K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/2f
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/30
65K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/31
32K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/32
38K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/33
26K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/34
25K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/35
23K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/36
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/37
25K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/38
1.8M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/39
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/3a
69K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/3b
329K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/3c
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/3d
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/3e
13K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/3f
41K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/40
74K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/41
206K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/42
152K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/43
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/44
114K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/45
81K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/2d
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/46
116K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/5e
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/7e
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a2
9.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ce
9.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e7
26K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/7f
4.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/80
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/81
146K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/82
32K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/83
9.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/84
134K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/85
20K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/86
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/87
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/88
5.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/89
29K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/8a
93K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/8b
41K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/8c
8.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/8d
105K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/8e
74K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/8f
23K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/90
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/91
56K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/92
153K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/93
308K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/94
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/95
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/96
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/97
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/98
104K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/9a
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/9b
11K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/9c
58K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/9d
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/9e
102K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/9f
77K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a0
1.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/a1
56K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e8
68K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/e9
46K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ea
512	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/eb
40K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ec
177K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ed
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ee
117K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ef
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f0
120K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f1
124K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f2
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f3
1.1M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f4
25K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f5
145K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f6
19K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f7
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f8
17K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/f9
168K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/fa
48K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/fb
53K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/fc
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/fd
49K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/fe
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/ff
0	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/info
0	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/pack
95K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/47
4.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/48
57K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/49
38K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/4a
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/4b
90K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/4c
74K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/4d
37K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/4e
19K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/4f
53K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/50
53K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/51
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/52
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/54
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/55
25K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/56
318K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/57
14K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/58
92K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/59
95K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/5a
71K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/5b
8.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/5c
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects/5d
26M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/objects
512	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/refs/heads
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/refs/remotes/origin
1.5K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/refs/remotes
0	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/refs/tags
2.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/.git/refs
26M	./RIBF128/scripts/bigripssort/work/I/anaroot/.git
1.4M	./RIBF128/scripts/bigripssort/work/I/anaroot/autom4te.cache
512	./RIBF128/scripts/bigripssort/work/I/anaroot/example/AnaLoop/cut
13K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/AnaLoop/wAnafile
44K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/AnaLoop/wROOT/BigRIPS
53K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/AnaLoop/wROOT
66K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/AnaLoop
57K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Go4/samples/anafile
12K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Go4/samples/fadc
57K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Go4/samples/samurai
126K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Go4/samples
182K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Go4
8.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/BigRIPS/1pass
16K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/BigRIPS/2pass
20K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/BigRIPS/mktree
48K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/BigRIPS
60K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/DALI
57K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/EURICA
21K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/Online
33K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/SAMURAI/Analysis
22K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/SAMURAI/RKtrace
110K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/SAMURAI
5.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros/standalone
342K	./RIBF128/scripts/bigripssort/work/I/anaroot/example/Macros
590K	./RIBF128/scripts/bigripssort/work/I/anaroot/example
139K	./RIBF128/scripts/bigripssort/work/I/anaroot/gui
2.0M	./RIBF128/scripts/bigripssort/work/I/anaroot/run/db
35K	./RIBF128/scripts/bigripssort/work/I/anaroot/run/matrix
8.0K	./RIBF128/scripts/bigripssort/work/I/anaroot/run/root
266K	./RIBF128/scripts/bigripssort/work/I/anaroot/run/scripts
2.7G	./RIBF128/scripts/bigripssort/work/I/anaroot/run
29K	./RIBF128/scripts/bigripssort/work/I/anaroot/scripts
18K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/.libs
28K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Core/.deps
6.3M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Core/.libs
38K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Core/include
3.9M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Core/src
11M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Core
44K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/EncExample/.deps
6.0M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/EncExample/.libs
136K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/EncExample/include
4.8M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/EncExample/src
12M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/EncExample
32K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Example/.deps
1.8M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Example/.libs
40K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Example/include
1.4M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Example/src
3.5M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop/Example
27M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/AnaLoop
32K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Core/.deps
3.1M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Core/.libs
225K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Core/include
1.2M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Core/src
5.2M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Core
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Nadeko/.deps
1.2M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Nadeko/.libs
41K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Nadeko/include
1.6M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Nadeko/src
2.9M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Nadeko
28K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/BigRIPS/.deps
7.4M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/BigRIPS/.libs
162K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/BigRIPS/include
1.8M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/BigRIPS/src
11M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/BigRIPS
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/CATANA/.deps
926K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/CATANA/.libs
20K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/CATANA/include
236K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/CATANA/src
1.4M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/CATANA
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/DALI/.deps
942K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/DALI/.libs
16K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/DALI/include
240K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/DALI/src
1.4M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/DALI
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/ESPRI/.deps
3.9M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/ESPRI/.libs
92K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/ESPRI/include
1.1M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/ESPRI/src
5.7M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/ESPRI
512	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/MINOS/.deps
76K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/MINOS/include
60K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/MINOS/src
197K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/MINOS
36K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/SAMURAI/.deps
22M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/SAMURAI/.libs
285K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/SAMURAI/include
14M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/SAMURAI/src
38M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/SAMURAI
24K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/WINDS/.deps
2.0M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/WINDS/.libs
28K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/WINDS/include
684K	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/WINDS/src
2.9M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction/WINDS
59M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources/Reconstruction
94M	./RIBF128/scripts/bigripssort/work/I/anaroot/sources
2.8G	./RIBF128/scripts/bigripssort/work/I/anaroot
2.8G	./RIBF128/scripts/bigripssort/work/I
0	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/branches
34K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/hooks
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/info
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/logs/refs/heads
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/logs/refs/remotes/origin
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/logs/refs/remotes
1.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/logs/refs
1.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/logs
592K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/00
9.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/01
74K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/02
93K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/03
190K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/04
1.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/05
111K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/06
27K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/07
59K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/08
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/09
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/0a
56K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/0b
206K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/0c
54K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/0d
69K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/0e
576K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/0f
153K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/10
9.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/11
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/12
68K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/13
44K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/14
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/15
3.5M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/16
89K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/17
421K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/18
81K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/19
4.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/1a
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/1b
12K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/1c
29K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/1d
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/1e
70K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/1f
1.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/20
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/21
93K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/22
205K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/23
114K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/24
112K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/25
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/26
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/27
58K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/28
23K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/29
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/2a
6.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/2b
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/2c
29K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a3
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a4
114K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a5
1.2M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a6
97K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a7
1.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a8
122K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a9
94K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/aa
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ab
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ac
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ad
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ae
1.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/af
477K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b0
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b1
28K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b2
62K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b3
19K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b4
290K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b5
41K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b6
85K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b7
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b8
174K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/b9
83K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ba
90K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/bb
57K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/bc
118K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/bd
33K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/be
14K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/bf
8.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c0
58K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c1
29K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c2
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c3
9.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c4
189K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c5
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c6
822K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c7
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c8
172K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/c9
10K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ca
313K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/cb
134K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/cc
14K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/cd
10K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/5f
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/60
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/61
37K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/62
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/63
49K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/64
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/65
57K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/66
418K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/67
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/68
161K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/69
1.2M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/6a
298K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/6b
76K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/6c
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/6d
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/6e
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/6f
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/70
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/71
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/72
9.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/73
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/74
110K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/75
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/76
26K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/77
6.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/78
455K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/79
2.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/7a
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/7b
32K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/7c
128K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/7d
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/cf
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d0
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d1
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d2
317K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d3
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d4
16K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d5
45K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d6
9.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d7
196K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d8
80K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/d9
8.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/da
118K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/db
68K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/dc
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/dd
9.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/de
253K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/df
124K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e0
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e1
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e2
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e3
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e4
10K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e5
1.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e6
30K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/2e
33K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/2f
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/30
65K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/31
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/32
38K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/33
10K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/34
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/35
23K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/36
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/37
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/38
1.8M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/39
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/3a
69K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/3b
329K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/3c
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/3d
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/3e
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/3f
41K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/40
74K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/41
206K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/42
147K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/43
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/44
114K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/45
81K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/2d
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/46
116K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/5e
1.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/7e
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a2
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ce
1.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e7
26K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/7f
4.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/80
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/81
146K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/82
32K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/83
9.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/84
134K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/85
20K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/86
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/87
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/88
5.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/89
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/8a
93K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/8b
41K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/8c
8.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/8d
105K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/8e
74K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/8f
23K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/90
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/91
56K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/92
153K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/93
308K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/94
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/95
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/96
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/97
14K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/98
104K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/9a
14K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/9b
11K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/9c
58K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/9d
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/9e
102K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/9f
77K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a0
1.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/a1
54K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e8
68K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/e9
46K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ea
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/eb
40K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ec
177K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ed
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ee
117K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ef
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f0
120K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f1
116K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f2
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f3
1.1M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f4
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f5
133K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f6
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f7
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f8
17K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/f9
168K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/fa
48K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/fb
53K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/fc
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/fd
49K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/fe
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/ff
0	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/info
0	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/pack
95K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/47
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/48
57K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/49
38K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/4a
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/4b
90K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/4c
74K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/4d
33K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/4e
19K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/4f
53K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/50
53K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/51
14K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/52
4.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/54
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/55
25K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/56
318K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/57
14K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/58
92K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/59
95K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/5a
70K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/5b
8.5K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/5c
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects/5d
26M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/objects
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/refs/heads
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/refs/remotes/origin
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/refs/remotes
0	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/refs/tags
1.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git/refs
26M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/.git
1.4M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/autom4te.cache
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/AnaLoop/cut
13K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/AnaLoop/wAnafile
44K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/AnaLoop/wROOT/BigRIPS
53K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/AnaLoop/wROOT
66K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/AnaLoop
57K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Go4/samples/anafile
12K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Go4/samples/fadc
57K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Go4/samples/samurai
126K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Go4/samples
182K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Go4
8.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/BigRIPS/1pass
16K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/BigRIPS/2pass
20K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/BigRIPS/mktree
48K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/BigRIPS
60K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/DALI
57K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/EURICA
21K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/Online
33K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/SAMURAI/Analysis
22K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/SAMURAI/RKtrace
110K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/SAMURAI
5.0K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros/standalone
342K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example/Macros
590K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/example
139K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/gui
2.0M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/run/db
35K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/run/matrix
0	./RIBF128/scripts/bigripssort/work/Ni/anaroot/run/root
266K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/run/scripts
2.6M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/run
29K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/scripts
18K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/.libs
28K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Core/.deps
6.3M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Core/.libs
38K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Core/include
3.9M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Core/src
11M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Core
44K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/EncExample/.deps
6.0M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/EncExample/.libs
136K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/EncExample/include
4.8M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/EncExample/src
12M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/EncExample
32K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Example/.deps
1.8M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Example/.libs
40K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Example/include
1.4M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Example/src
3.5M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop/Example
27M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/AnaLoop
32K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Core/.deps
3.1M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Core/.libs
225K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Core/include
1.2M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Core/src
5.2M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Core
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Nadeko/.deps
1.2M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Nadeko/.libs
41K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Nadeko/include
1.6M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Nadeko/src
2.9M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Nadeko
28K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/BigRIPS/.deps
7.4M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/BigRIPS/.libs
162K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/BigRIPS/include
1.8M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/BigRIPS/src
11M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/BigRIPS
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/CATANA/.deps
926K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/CATANA/.libs
20K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/CATANA/include
236K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/CATANA/src
1.4M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/CATANA
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/DALI/.deps
942K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/DALI/.libs
16K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/DALI/include
240K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/DALI/src
1.4M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/DALI
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/ESPRI/.deps
3.9M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/ESPRI/.libs
92K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/ESPRI/include
1.1M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/ESPRI/src
5.7M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/ESPRI
512	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/MINOS/.deps
76K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/MINOS/include
60K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/MINOS/src
197K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/MINOS
36K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/SAMURAI/.deps
22M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/SAMURAI/.libs
285K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/SAMURAI/include
14M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/SAMURAI/src
38M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/SAMURAI
24K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/WINDS/.deps
2.0M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/WINDS/.libs
28K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/WINDS/include
684K	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/WINDS/src
2.9M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction/WINDS
59M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources/Reconstruction
94M	./RIBF128/scripts/bigripssort/work/Ni/anaroot/sources
125M	./RIBF128/scripts/bigripssort/work/Ni/anaroot
125M	./RIBF128/scripts/bigripssort/work/Ni
0	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/branches
34K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/hooks
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/info
4.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/logs/refs/heads
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/logs/refs/remotes/origin
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/logs/refs/remotes
9.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/logs/refs
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/logs
592K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/00
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/01
74K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/02
93K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/03
190K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/04
1.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/05
111K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/06
27K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/07
63K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/08
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/09
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/0a
68K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/0b
214K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/0c
54K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/0d
69K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/0e
576K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/0f
161K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/10
10K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/11
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/12
68K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/13
44K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/14
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/15
3.5M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/16
89K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/17
422K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/18
81K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/19
4.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/1a
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/1b
12K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/1c
29K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/1d
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/1e
70K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/1f
1.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/20
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/21
93K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/22
205K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/23
114K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/24
112K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/25
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/26
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/27
58K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/28
23K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/29
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/2a
6.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/2b
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/2c
29K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a3
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a4
114K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a5
1.2M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a6
97K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a7
2.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a8
130K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a9
102K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/aa
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ab
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ac
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ad
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ae
1.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/af
477K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b0
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b1
28K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b2
62K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b3
19K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b4
294K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b5
41K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b6
85K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b7
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b8
175K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/b9
84K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ba
98K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/bb
57K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/bc
118K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/bd
33K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/be
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/bf
8.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c0
58K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c1
29K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c2
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c3
9.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c4
194K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c5
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c6
822K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c7
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c8
172K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/c9
9.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ca
325K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/cb
134K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/cc
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/cd
10K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/5f
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/60
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/61
37K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/62
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/63
49K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/64
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/65
57K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/66
418K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/67
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/68
161K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/69
1.2M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/6a
298K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/6b
84K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/6c
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/6d
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/6e
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/6f
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/70
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/71
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/72
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/73
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/74
109K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/75
29K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/76
26K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/77
6.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/78
455K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/79
2.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/7a
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/7b
32K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/7c
128K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/7d
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/cf
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d0
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d1
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d2
325K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d3
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d4
20K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d5
49K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d6
9.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d7
196K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d8
80K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/d9
9.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/da
118K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/db
68K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/dc
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/dd
9.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/de
253K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/df
124K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e0
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e1
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e2
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e3
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e4
10K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e5
1.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e6
30K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/2e
33K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/2f
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/30
65K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/31
32K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/32
38K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/33
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/34
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/35
23K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/36
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/37
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/38
1.8M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/39
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/3a
69K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/3b
329K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/3c
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/3d
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/3e
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/3f
41K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/40
74K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/41
206K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/42
148K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/43
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/44
114K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/45
81K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/2d
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/46
116K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/5e
1.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/7e
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a2
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ce
9.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e7
26K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/7f
4.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/80
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/81
154K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/82
32K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/83
9.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/84
134K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/85
20K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/86
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/87
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/88
5.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/89
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/8a
94K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/8b
41K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/8c
8.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/8d
105K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/8e
74K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/8f
23K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/90
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/91
56K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/92
153K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/93
308K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/94
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/95
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/96
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/97
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/98
104K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/9a
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/9b
11K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/9c
58K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/9d
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/9e
102K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/9f
77K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a0
1.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/a1
56K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e8
68K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/e9
46K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ea
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/eb
40K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ec
177K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ed
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ee
117K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ef
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f0
120K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f1
116K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f2
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f3
1.1M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f4
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f5
132K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f6
19K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f7
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f8
17K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/f9
168K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/fa
48K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/fb
53K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/fc
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/fd
49K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/fe
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/ff
0	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/info
0	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/pack
95K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/47
4.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/48
57K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/49
38K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/4a
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/4b
90K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/4c
74K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/4d
37K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/4e
19K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/4f
53K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/50
53K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/51
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/52
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/54
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/55
25K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/56
318K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/57
14K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/58
92K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/59
95K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/5a
71K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/5b
8.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/5c
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects/5d
26M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/objects
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/refs/heads
1.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/refs/remotes/origin
1.5K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/refs/remotes
0	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/refs/tags
2.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git/refs
26M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/.git
1.4M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/autom4te.cache
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/AnaLoop/cut
13K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/AnaLoop/wAnafile
44K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/AnaLoop/wROOT/BigRIPS
53K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/AnaLoop/wROOT
66K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/AnaLoop
57K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Go4/samples/anafile
12K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Go4/samples/fadc
57K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Go4/samples/samurai
126K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Go4/samples
182K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Go4
8.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/BigRIPS/1pass
16K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/BigRIPS/2pass
20K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/BigRIPS/mktree
48K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/BigRIPS
60K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/DALI
57K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/EURICA
21K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/Online
33K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/SAMURAI/Analysis
22K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/SAMURAI/RKtrace
110K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/SAMURAI
5.0K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros/standalone
342K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example/Macros
590K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/example
139K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/gui
2.0M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/run/db
35K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/run/matrix
2.4G	./RIBF128/scripts/bigripssort/work/Sm/anaroot/run/root_test
267K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/run/scripts
11G	./RIBF128/scripts/bigripssort/work/Sm/anaroot/run
29K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/scripts
18K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/.libs
28K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Core/.deps
6.3M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Core/.libs
38K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Core/include
3.9M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Core/src
11M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Core
44K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/EncExample/.deps
6.0M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/EncExample/.libs
136K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/EncExample/include
4.8M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/EncExample/src
12M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/EncExample
32K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Example/.deps
1.8M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Example/.libs
40K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Example/include
1.4M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Example/src
3.5M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop/Example
27M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/AnaLoop
32K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Core/.deps
3.1M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Core/.libs
225K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Core/include
1.2M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Core/src
5.2M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Core
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Nadeko/.deps
1.2M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Nadeko/.libs
41K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Nadeko/include
1.6M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Nadeko/src
2.9M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Nadeko
28K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/BigRIPS/.deps
7.4M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/BigRIPS/.libs
162K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/BigRIPS/include
1.8M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/BigRIPS/src
11M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/BigRIPS
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/CATANA/.deps
926K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/CATANA/.libs
20K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/CATANA/include
236K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/CATANA/src
1.4M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/CATANA
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/DALI/.deps
942K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/DALI/.libs
16K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/DALI/include
240K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/DALI/src
1.4M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/DALI
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/ESPRI/.deps
3.9M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/ESPRI/.libs
92K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/ESPRI/include
1.1M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/ESPRI/src
5.7M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/ESPRI
512	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/MINOS/.deps
76K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/MINOS/include
60K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/MINOS/src
197K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/MINOS
36K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/SAMURAI/.deps
22M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/SAMURAI/.libs
285K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/SAMURAI/include
14M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/SAMURAI/src
38M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/SAMURAI
24K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/WINDS/.deps
2.0M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/WINDS/.libs
28K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/WINDS/include
684K	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/WINDS/src
2.9M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction/WINDS
59M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources/Reconstruction
94M	./RIBF128/scripts/bigripssort/work/Sm/anaroot/sources
11G	./RIBF128/scripts/bigripssort/work/Sm/anaroot
11G	./RIBF128/scripts/bigripssort/work/Sm
15G	./RIBF128/scripts/bigripssort/work
18G	./RIBF128/scripts/bigripssort
40K	./RIBF128/scripts/brikensort/config
40K	./RIBF128/scripts/brikensort
16K	./RIBF128/scripts/merger/anamerger/pictures
2.9M	./RIBF128/scripts/merger/anamerger/total
22M	./RIBF128/scripts/merger/anamerger
7.5M	./RIBF128/scripts/merger/anamerger_RIBF148/pictures
15M	./RIBF128/scripts/merger/anamerger_RIBF148/cuts
32M	./RIBF128/scripts/merger/anamerger_RIBF148
43M	./RIBF128/scripts/merger/config
95M	./RIBF128/scripts/merger
2.2M	./RIBF128/scripts/monitor
32K	./RIBF128/scripts/parallelscript/script_RIBF127_backup
36K	./RIBF128/scripts/parallelscript/script_RIBF128_backup
160K	./RIBF128/scripts/parallelscript/script_RIBF148_backup
14K	./RIBF128/scripts/parallelscript/test
449M	./RIBF128/scripts/parallelscript/tmps
449M	./RIBF128/scripts/parallelscript
23G	./RIBF128/scripts
3.7T	./RIBF128
0	./RIBF148/bigrips/run1124.ridf
0	./RIBF148/bigrips/run1125.ridf
0	./RIBF148/bigrips/run1126.ridf
0	./RIBF148/bigrips/run1127.ridf
142G	./RIBF148/bigrips
32G	./RIBF148/briken
2.9G	./RIBF148/rootfiles/bigrips
2.9G	./RIBF148/rootfiles
836G	./RIBF148
512	./Seagate/Registration
512	./Seagate
0	./Start_Here_Mac.app/Contents/Frameworks
26M	./Start_Here_Mac.app/Contents/MacOS
304K	./Start_Here_Mac.app/Contents/Resources
4.0K	./Start_Here_Mac.app/Contents/_CodeSignature
26M	./Start_Here_Mac.app/Contents
26M	./Start_Here_Mac.app
7.0T	

https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=808110721

10.56 Detector biases & leakage currents OK - see attachments 1 & 2

      USB-controlled ac mains relay input #1 fuse blown - replaced

11.12 *all* system wide checks OK *except* nnaida21 fails ADC calibration

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

11.36 nnaida13 & nnaida11 1*W spectra - see attachments 3 & 4 
      per FEE64 1.8.W spectra - see attachments 5 & 6
      good events statistics - see attachment 7
  
      Note c. 3kHz modulated HF noise has disappeared overnight

12.00 2x unused (possibly faulty) MACBs removed from AIDA NIM bins preparatory to UK return
      ambient temperature +24.0 deg C, d.p. +8.9 deg C, RH 38.8%
      Julabo FL11006 set point +20.0 deg C, actual +20.0 deg C, water level c. 75%

14.03 nnaida13 1*W spectra
      Ibias LF feedback 0x8 (default) - see attachments 8 & 10
      Ibias LF feedback 0xf - see attachments 9 & 11

14.30 BRIKEN 3He and clovers off
      no obvious change in preamp waveform noise

14.33 DSSSD bias off

14.37 FEE64 power off

14.43 2x NIM bins off
      BNC PB-4 pulser off
      USB-controlled ac mains relay off, interlock enabled, USB cable removed
      ac mains circuit off
      Tektronix AFG3201C off
      
      Julabo FL11006 off
      3ph supply off 

The DAQ Run Control 'zero all histograms' function appears to have stopped working
- an issue related to the new RunControl/sys.tcl ... ?

See https://elog.ph.ed.ac.uk/AIDA/662

13.47 DAQ continues
      AIDA file RIBF148/R10_39

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0x64
      LEC/MEC fast comparator 0x14

13.49 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachment 4 
      No warnings/errors reported by merger since start of RIBF148/R10  - see attachment 5
      No changes to PLL and DCM clock Lock monitor - see attachment 6
      *all* system wide checks OK (zero fails)

14.00 analysis file RIBF148/R8_39 - zero deadtime, zero MBS and zero ts timewarps - see attachment 7

14.03 online analysis 
      ADC & disc data synchronised - see attachment 8
      per DSSSD m_p versus m_n (LEC) - see attachments 9
      per DSSSD x versus y (LEC) - see attachment 10
      per DSSSD E_p versus E_n (LEC) - 512x512 spectra - nominal 20keV per channel - see attachment 11
      per DSSSD side ADC ts - event ts - see attachment 12

14.17 Layout per FEE64 Rate, HitRate and 1.8.* spectra - see attachments 13-18
      nnaida11 & nnaida13 1.*.W spectra - see attachments 19-20

      3kHz modulated HF noise positive input FEE64s
      BRIKEN and Clovers on

14.32 Ambient temperature +24.3 deg C, d.p. +8.7 deg C, RH 37.5%
      Julabo FL11006 set point +20.0 deg C actual +20.0 deg C - water level c. 75%

14.34 DAQ stop
      AIDA file RIBF148/R10_40

14.45 nnaida13 1*W spectra
      Ibias LF feedback  attachment
      0x8 (default)      21
      0x0                22 & 23
      0xf                24

      0x0 preamp o/p -> V rail
      0x8 - 0xf no obvious difference

14.52 slow comparator 0x64 -> 0xa
      Ibias LF feedback  attachment
      0x8 (default)      25 27
      0xf                26 28

      0xf appears to reduce (but not eliminate) frequency and amplitude of saw tooth transients 
      no obvious effect on good event rate

      for nnaida13 combination of Ibias LF feedback 0x8 -> 0xf and slow comparator 0xa -> 0xf 
      largely eliminates saw tooth except for noisiest strips e.g. 1.1.W 'edge' strip
      good events 280k -> 61k 

17.12 DAQ start
      AIDA file RIBF148/R11

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0xf
      LEC/MEC fast comparator 0x14
      Ibias LF feedback 0x8 -> 0xf

      Layout Rate, HitRate and 1.8.* spectra -see attachments 29-35
      Merged data rate c. 500k data items/s, 4Mb/s

17.50 DAQ stop
      AIDA file RIBF148/R11_4

17.54 DAQ start
      AIDA file RIBF148/R12

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0xf -> 0xa
      LEC/MEC fast comparator 0x14
      Ibias LF feedback 0xf

      good events statistics - see attachment 36

18.14 DAQ stop
      AIDA file RIBF148/R12_6

      DSSSD bias cycled 100->0->100V

18.21 DAQ start
      AIDA file RIBF148/R13

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0xa
      LEC/MEC fast comparator 0x14
      Ibias LF feedback 0xf -> 0x8

      good events statistics - see attachment 37

18.40 DAQ stop
      AIDA file RIBF148/R13_5

18.42 Detector biases & leakage currents OK - see attachments 38 & 39

18.59 analysis file RIBF148/R13_5 -c. 1% deadtime, zero MBS and zero ts timewarps - see attachment 40

10.35 DAQ continues
      AIDA file RIBF148/R10_14

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0x64
      LEC/MEC fast comparator 0x14

10.35 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachment 4 
      No warnings/errors reported by merger since start of RIBF148/R10  - see attachment 5
      No changes to PLL and DCM clock Lock monitor - see attachment 6
      *all* system wide checks OK (zero fails)

10.41 analysis file RIBF148/R8_39 - zero deadtime, 2x MBS and zero ts timewarps - see attachment 7

10.47 online analysis 
      ADC & disc data synchronised - see attachment 7
      per DSSSD m_p versus m_n (LEC) - see attachments 8
      per DSSSD x versus y (LEC) - see attachment 9
      per DSSSD E_p versus E_n (LEC) - 512x512 spectra - nominal 20keV per channel - see attachment 10
      per DSSSD side ADC ts - event ts - see attachment 11

11.02 Layout per FEE64 Rate, HitRate and 1.8.* spectra - see attachments 11-21
      nnaida11 & nnaida13 1.*.W spectra - see attachments 22-24

      3kHz modulated HF noise positive input FEE64s
      BRIKEN and Clovers on
       
11.30 Ambient temperature +24.0 deg C, d.p. +9.6 deg C, RH 39.9%
      Julabo FL11006 set point +20.0 deg C actual +20.0 deg C - water level c. 75%

16.19 Detector biases & leakage currents OK - see attachments 23 & 24

19.48 Detector biases & leakage currents OK - see attachments 25 & 26

List of the type and quantity of cables we have at RIKEN that are not currently in use.

10.52 DAQ continues
      AIDA file RIBF148/R8_39

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0x64
      LEC/MEC fast comparator 0x14

10.54 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachment 4 
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 5
      *all* system wide checks OK (zero fails)

11.02 analysis file RIBF148/R8_39 - zero deadtime, 222x MBS and zero ts timewarps - see attachment 6
      correlation scaler trigger ~ 950/3 ~ 320Hz

15.12 online analysis 
      ADC & disc data synchronised - note the effect of the higher slow comparator threshold on the after-pulse
- see attachment 7
      per DSSSD m_p versus m_n (LEC) - see attachments 8
      per DSSSD x versus y (LEC) - see attachment 9
      per DSSSD E_p versus E_n (LEC) - 512x512 spectra - nominal 20keV per channel - see attachment 10
      Spectra show light particles detected from last night's 238U beam test - no HEC data due to 10cm Pb wall
      It should be straightforward to separate the alpha background from this data using the change in LEC rates
      and the light particle data will also provide a good check of the calibration.

11.17 Stop DAQ
      AIDA file RIBF148/R8_40

      online histograms & SortSas spectra zero'd

      saw tooth noise FEE64s p+n junction strips not observed
      clover detectors re-installed but not cabled or biased
      3He detectors are on
      Si dE and variable degrader was removed yesterday

11.19 Start DAQ
      AIDA file RIBF148/R9

      Check ASIC control x2

13.15 Detector biases & leakage currents OK - see attachments 11 & 12

16.45 Clover detectors cabled and bias applied

17.33 DAQ continues
      AIDA file RIBF148/R9_6

      nnaida13 & nnaida11 1.8.W spectra - nnaida13 shows evidence of high frequency noise modulated
      with a period of ~400us cf. https://elog.ph.ed.ac.uk/AIDA/661

18.01 DAQ stop
      AIDA file RIBF148/R9_6

18.09 *** NEW FEE64 FIRMWARE ***
      New RunControl/sys.tcl and Check/check.js .tcl .tml

18.48 DAQ start
      AIDA file RIBF148/R10

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0x64
      LEC/MEC fast comparator 0x14

19.03 online analysis
      ADC & disc data synchronised - 20.48us/channel - see attachment 15
      
      For all combinations of x-y strips (LEC events) calculate

         IF ( ihit( i ) .AND. ihit( j ) ) THEN
          tdiff1 = ihit_ts(i)-e_time
          tdiff2 = ihit_ts(j)-e_time
          CALL inc1d( 500, tdiff1 + 2000 )
          CALL inc1d( 506, tdiff2 + 2000 )
          CALL inc2d( 2600, tdiff1, tdiff2 )
         ENDIF

      where
      e_time = 100MHz timestamp of first ADC word of event
      ihit_ts(i) = 100MHz timestamp of ADC word i of event

      see attachments 16-17

19.21 Current MONLOCK status - see attachment 18

15.01 DAQ continues
      AIDA file RIBF148/R8_22

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except* 
      slow comparator 0x64
      LEC/MEC fast comparator 0x14

15.02 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachment 4 
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 5
      *all* system wide checks OK (zero fails)

15.12 online analysis 
      ADC & disc data synchronised - note the effect of the higher slow comparator threshold on the after-pulse
- see attachment 6
      per DSSSD m_p versus m_n (LEC) - see attachments 7-8
      per DSSSD x versus y (LEC) - see attachment 9
      per DSSSD E_p versus E_n (LEC) - 512x512 spectra - nominal 20keV per channel - see attachment 10

15.30 per FEE64 1.8.* spectra - see attachments 11-18
      note all waveforms x-scale 1000ch = 2ms
      note absence of saw tooth transients/noise p+n waveforms - attachments 15-16
      Brief discussion with Nishimura-san and Gabor - clover detectors have been removed from BRIKEN
      otherwise no major changes in last 24h
      see also - attachments 17-18

15.42 Ambient temperature +24.7 deg C, d.p. +9.4 deg C, RH 37.8%
      Julabo FL11006 recirculating chiller set point +20.0deg C , actual +20.0 deg C, water level c. 75% 

15.54 analysis file RIBF148/R8_22 - zero deadtime, 1x MBS & zero ts timewarps - see attachment 19

08.11 DAQ continues

      147Sm BigRIPS setting - 0mm Al (at F7) + 0mm variable + 0mm Al fixed (at F11) = 0mm Al

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

08.17 online analysis
      per DSSSD x versus y (HEC) - see attachment 1
      per DSSSD E_P versus E_n (HEC) - see attachment 2
      ADC & disc data synchronised - see attachment 3

09.00 DAQ stop
      AIDA file RIBF148/R3_396

      *** END OF BRIKEN MAY/JUNE 2017 CAMPAIGN ***

      Detector biases & leakage currents OK - see attachments 4 & 5
      FEE64 Temperatures OK - see attachment 6
      good events statistics stable & OK - see attachment 7
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 8
      *all* system wide checks OK *except* nnaida13 fails ADC calibration

09.07 analysis RIBF148/R3_398 - deadtime <0.5%, zero MBS & ts timestamps - see attachment 9
      *all* online and SortSas spectra zero'd 

09.15 DAQ start
      AIDA file RIBF148/R3_400
      BRIKEN file 48

      Background run - AIDA + BRIKEN + Clovers

11:28   252Cf source placed at F11
        BRIKEN DAQ stopped  bgd_048
 
        AIDA on R3_434 

11.31 DAQ stop
      AIDA file RIBF148/R3_435

11.34 Detector biases & leakage currents OK - see attachments 10 & 11
      Ambient temperature +24.6 deg C, RH 35.6%, d.p. +8.4 deg C

11.41 DAQ start
      AIDA file RIBF148/R4

      Pulser walkthrough

      BNC PB-4
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 250Hz range
      delay MIN, tail pulse, INT ref

      see attachment 12

11.52 DAQ stop
      AIDA file RIBF148/R4_2

11.55 DAQ start
      AIDA file RIBF148/R5

      Pulser walkthrough

      BNC PB-4
      Amplitude 12,000 - 2,000 @ 2,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 250Hz range
      delay MIN, tail pulse, INT ref

      see attachment 13

12.02 DAQ stop
      AIDA file RIBF148/R5_2

13.54 DAQ start
      AIDA file RIBF148/R6

      Background - pulser off

14.05 Detector biases & leakage currents OK - see attachments 12 & 13


14.11 DAQ stop
      AIDA file RIBF148/R6_4

14.20 AIDA retracted from BRIKEN

14.21 Detector biases & leakage currents OK - see attachments 14 & 15

      check ASIC control x2

14.50 DAQ start
      AIDA file RIBF148/R8

      alpha background

      BNC PB-4
      Amplitude 90,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39
      *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0x14

      data rate c. 500kb/s c. 65k data items/s




           

00:02 System wide checks ok
      Good events - attachment 1
      FEE temperatures - attachment 2
      Bias and leakages ok - attachment 3

00:31 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R3_236

00:32 BRIKEN starts run 40
      BigRIPS starts run 2512
      AIDA on file R3_236

01:30 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R3_254

01:31 BRIKEN starts run 41
      BigRIPS starts run 2513
      AIDA on file R3_255

01:41 DSSD rates from R3_257
 *** DSSSD # 1 count:    119356 old count:     62524 dt:      2.02 s  LEC rate:  59170.96 Hz
 *** DSSSD # 2 count:    168540 old count:     87963 dt:      2.02 s  LEC rate:  83554.01 Hz
 *** DSSSD # 3 count:     61578 old count:     32845 dt:      2.02 s  LEC rate:  30527.41 Hz
 *** DSSSD # 4 count:     49914 old count:     25818 dt:      2.02 s  LEC rate:  24744.96 Hz
 *** DSSSD # 5 count:     25977 old count:     13821 dt:      2.02 s  LEC rate:  12878.15 Hz
 *** DSSSD # 6 count:     43384 old count:     22072 dt:      2.02 s  LEC rate:  21507.70 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:      2.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         6 old count:         3 dt:      2.02 s  HEC rate:      2.97 Hz
 *** DSSSD # 3 count:         1 old count:         1 dt:      2.02 s  HEC rate:      0.50 Hz
 *** DSSSD # 4 count:         1 old count:         1 dt:      2.02 s  HEC rate:      0.50 Hz
 *** DSSSD # 5 count:        14 old count:        10 dt:      2.02 s  HEC rate:      6.94 Hz
 *** DSSSD # 6 count:       211 old count:       118 dt:      2.02 s  HEC rate:    104.60 Hz

01:43 Analysis of R3_257 - attachment 4
      No timewarps

02:10 System wide checks ok
      Leakage and bias ok - attachment 5
      Good events - attachment 6
      FEE temperatures - attachment 7

02:30 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R3_274

02:32 BRIKEN starts run 42
      BigRIPS starts run 2514
      AIDA on file R3_274

03:30 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R3_292

03:32 BRIKEN starts run 43
      BigRIPS starts run 2514
      AIDA on file R3_293

04:28 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R3_311

04:29 BRIKEN starts run 44
      BigRIPS starts run 2515
      AIDA on file R3_311

04:54 System wide checks ok
      Bias and leakage ok - attachment 8
      Good Events - attachment 9
      FEE temperatures - attachment 10

05:00 DSSD rates from R3_319
 *** DSSSD # 1 count:    255278 old count:    193923 dt:      1.01 s  LEC rate:  60935.40 Hz
 *** DSSSD # 2 count:    360584 old count:    272321 dt:      1.01 s  LEC rate:  87659.38 Hz
 *** DSSSD # 3 count:    133027 old count:    100845 dt:      1.01 s  LEC rate:  31961.91 Hz
 *** DSSSD # 4 count:    108047 old count:     82416 dt:      1.01 s  LEC rate:  25455.71 Hz
 *** DSSSD # 5 count:     51776 old count:     38962 dt:      1.01 s  LEC rate:  12726.37 Hz
 *** DSSSD # 6 count:     88202 old count:     66648 dt:      1.01 s  LEC rate:  21406.59 Hz
 *** DSSSD # 1 count:         1 old count:         1 dt:      1.01 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        11 old count:         8 dt:      1.01 s  HEC rate:      2.98 Hz
 *** DSSSD # 3 count:         2 old count:         2 dt:      1.01 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         3 old count:         2 dt:      1.01 s  HEC rate:      0.99 Hz
 *** DSSSD # 5 count:        32 old count:        25 dt:      1.01 s  HEC rate:      6.95 Hz
 *** DSSSD # 6 count:       439 old count:       335 dt:      1.01 s  HEC rate:    103.29 Hz

05:30 BRIKEN and BigRIPS stop DAQs
      AIDA on file R3_330

05:31 BigRIPS starts run 2516
      BRIKEN starts run 45
      AIDA on file R3_331

06:31 BigRIPS and BRIKEN stop DAQs
      AIDA on file R3_350

06:32 BRIKEN starts run 46
      BigRIPS starts run 2517
      AIDA on file R3_350

06:50 System wide checks ok
      Bias and leakage currents ok - attachment 11
      Good events - attachment 12
      FEE temperatures - attachment 13

07:09 Merger still running ok - attachment 14

07:31 BigRIPS and BRIKEN stop their DAQs
      AIDA on file R3_369

07:32 BRIKEN starts run 47
      BigRIPS starts run 2518
      AIDA on file R3_369

16.01 DAQ continues

16.01 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachment 4 
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 5
      *all* system wide checks OK *except* nnaida13 fails ADC calibration

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      147Sm BigRIPS setting - 0mm Al (at F7) + 2mm variable + 0mm Al fixed (at F11) = 2mm Al

16.08 *all* online histograms zero'd 

16.31 DAQ stop
      AIDA file RIBF148/R3_84

16.31 DAQ start
      AIDA file RIBF148/R3_84
      BigRIPS file 2504
      BRIKEN file 32

17.33 DAQ stop
      AIDA file RIBF148/R3_104

17.34 DAQ start
      AIDA file RIBF148/R3_104
      BigRIPS file 2505
      BRIKEN file 33

18.01 Detector biases & leakage currents OK - see attachments 6 & 7
      FEE64 Temperatures OK - see attachment 8
      good events statistics stable & OK - see attachment 9
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 10
      *all* system wide checks OK *except* nnaida13 fails ADC calibration

18.03 online analysis file RIBF148/R3_113 - deadtime < 0.5%, 2 MBS & 0 ts timewarps - see attachment 11

18.04 DAQ stop
      AIDA file RIBF148/R3_114

18.05 DAQ start
      AIDA file RIBF148/R3_114
      BigRIPS file 2506
      BRIKEN file 34

      147Sm BigRIPS setting - 0mm Al (at F7) + 0mm variable + 0mm Al fixed (at F11) = 0mm Al

19.14 DAQ stop
      AIDA file RIBF148/R3_135

19.15 DAQ start
      AIDA file RIBF148/R3_135
      BigRIPS file 2507
      BRIKEN file 35

20.01 Detector biases & leakage currents OK - see attachments 12 & 13
      FEE64 Temperatures OK - see attachment 14
      good events statistics stable & OK - see attachment 15
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 16
      *all* system wide checks OK *except* nnaida13 fails ADC calibration

20.03 online analysis file RIBF148/R3_150 - deadtime < 0.5%, 0 MBS & ts timewarps - see attachment 17

20.25 DAQ stop
      AIDA file RIBF148/R3_157

20.26 DAQ start
      AIDA file RIBF148/R3_158
      BigRIPS file 2508
      BRIKEN file 36

21.30 DAQ stop
      AIDA file RIBF148/R3_178

21.31 DAQ start
      AIDA file RIBF148/R3_179
      BigRIPS file 2509
      BRIKEN file 37

22.06 Detector biases & leakage currents OK - see attachments 18 & 19
      FEE64 Temperatures OK - see attachment 20
      good events statistics stable & OK - see attachment 21
      No warnings/errors reported by merger since start of RIBF148/R3  - see attachment 22
      *all* system wide checks OK *except* nnaida13 fails ADC calibration

22.08 online analysis file RIBF148/R3_190 - deadtime < 1%, 1 MBS & 0 ts timewarps - see attachment 23

22.26 DAQ stop
      AIDA file RIBF148/R3_196

22.27 DAQ start
      AIDA file RIBF148/R3_197
      BigRIPS file 2510
      BRIKEN file 38

23.03 online analysis
      per DSSSD x versus y (HEC) - see attachment 24
      per DSSSD E_P versus E_n (HEC) - see attachment 25
      ADC & disc data synchronised - see attachment 26

23.16 beam lost
      AIDA file RIBF148/R3_212

23.16 beam back within 1 min
      AIDA file RIBF148/R3_213

23.31 DAQ stop
      AIDA file RIBF148/R3_217

22.32 DAQ start
      AIDA file RIBF148/R3_218
      BigRIPS file 2511
      BRIKEN file 39

09:00   Stop DAQ  to tune the Sm beam, may need 3 hours
        AIDA file RIBF128/R9_319
        
        removed the 1.5 mm degrader before the Pb box
     

09:  Start DAQ
        AIDA file RIBF128/R9


10.35     Detector biases & leakage currents OK - see attachments 1 & 2

             FEE64 Temperatures OK - see attachment 3

      good events statistics stable & OK - see attachment 4
 
      1x error reported by merger since c. 15.00 Sunday 12 June  - see attachment 5

      *all* system wide checks OK *except* nnaida13 fails ADC calibration

11.33 DAQ stop

          AIDA file RIBF128/R9_358

11.39 DAQ start

          AIDA file RIBF148/R3_0

          Correlation scaler reset request sent


11.58 analysis file RIBF148/R3_3 - deadtime < 0.5%, 2 MBS timewarps, zero ts timewarps - see attachment 6

13:33 Leakage currents as beam starts - attachment 7

13:40 BigRIPS starts run 2501
      BRIKEN starts run 29
      AIDA on file R3_31
      No degraders in at F7 and no variable degraders in

13:42 DSSD rates from R3_30
 *** DSSSD # 1 count:    111755 old count:     54792 dt:      1.01 s  LEC rate:  56401.81 Hz
 *** DSSSD # 2 count:    163809 old count:     82230 dt:      1.01 s  LEC rate:  80775.29 Hz
 *** DSSSD # 3 count:     61328 old count:     31972 dt:      1.01 s  LEC rate:  29066.79 Hz
 *** DSSSD # 4 count:     50635 old count:     25404 dt:      1.01 s  LEC rate:  24982.43 Hz
 *** DSSSD # 5 count:     23710 old count:     12126 dt:      1.01 s  LEC rate:  11469.88 Hz
 *** DSSSD # 6 count:     41872 old count:     21419 dt:      1.01 s  LEC rate:  20251.50 Hz
 *** DSSSD # 1 count:         2 old count:         0 dt:      1.01 s  HEC rate:      1.98 Hz
 *** DSSSD # 2 count:         8 old count:         5 dt:      1.01 s  HEC rate:      2.97 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:      1.01 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:      1.01 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:        20 old count:         8 dt:      1.01 s  HEC rate:     11.88 Hz
 *** DSSSD # 6 count:       192 old count:        91 dt:      1.01 s  HEC rate:    100.00 Hz

13:44 BRIKEN and BigRIPS stop their DAQs

13:44 BigRIPS setting 147Sm 0mm Al (at F7), 2mm Al (variable) + 0mm Al fixed (at F11)

13:50 DSSD rates from R3_33
 *** DSSSD # 1 count:    173930 old count:    115392 dt:      1.02 s  LEC rate:  57530.02 Hz
 *** DSSSD # 2 count:    247217 old count:    167042 dt:      1.02 s  LEC rate:  78794.45 Hz
 *** DSSSD # 3 count:    106853 old count:     71057 dt:      1.02 s  LEC rate:  35179.62 Hz
 *** DSSSD # 4 count:     87071 old count:     58930 dt:      1.02 s  LEC rate:  27656.43 Hz
 *** DSSSD # 5 count:     31923 old count:     21528 dt:      1.02 s  LEC rate:  10216.01 Hz
 *** DSSSD # 6 count:     61469 old count:     40889 dt:      1.02 s  LEC rate:  20225.63 Hz
 *** DSSSD # 1 count:         1 old count:         1 dt:      1.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        18 old count:        11 dt:      1.02 s  HEC rate:      6.88 Hz
 *** DSSSD # 3 count:        23 old count:        13 dt:      1.02 s  HEC rate:      9.83 Hz
 *** DSSSD # 4 count:       140 old count:        90 dt:      1.02 s  HEC rate:     49.14 Hz
 *** DSSSD # 5 count:       117 old count:        80 dt:      1.02 s  HEC rate:     36.36 Hz
 *** DSSSD # 6 count:        38 old count:        28 dt:      1.02 s  HEC rate:      9.83 Hz

13:52 BRIKEN starts run 30
      BigRIPS starts run 2502
      AIDA on file R3_35

13:54 System wide checks ok
      DSSD rates from R3_35
 *** DSSSD # 1 count:    112192 old count:     55424 dt:      1.03 s  LEC rate:  55291.13 Hz
 *** DSSSD # 2 count:    165577 old count:     82475 dt:      1.03 s  LEC rate:  80940.03 Hz
 *** DSSSD # 3 count:     64444 old count:     31995 dt:      1.03 s  LEC rate:  31604.81 Hz
 *** DSSSD # 4 count:     54003 old count:     26596 dt:      1.03 s  LEC rate:  26693.98 Hz
 *** DSSSD # 5 count:     29688 old count:     13945 dt:      1.03 s  LEC rate:  15333.43 Hz
 *** DSSSD # 6 count:     41562 old count:     21408 dt:      1.03 s  LEC rate:  19629.68 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:      1.03 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         4 old count:         2 dt:      1.03 s  HEC rate:      1.95 Hz
 *** DSSSD # 3 count:         9 old count:         5 dt:      1.03 s  HEC rate:      3.90 Hz
 *** DSSSD # 4 count:         8 old count:         3 dt:      1.03 s  HEC rate:      4.87 Hz
 *** DSSSD # 5 count:        85 old count:        34 dt:      1.03 s  HEC rate:     49.67 Hz
 *** DSSSD # 6 count:       102 old count:        50 dt:      1.03 s  HEC rate:     50.65 Hz

14:20   no beam now

14:22 Beam back

14.50 analysis file RIBF148/R3_50 - deadtime < 0.5%, 7 MBS timewarps, zero ts timewarps - see attachment 8

15.02 DAQ stop
      AIDA file RIBF148/R3_57

      Beam off - scheduled maintenance ~2h

15.18 online analysis
      per DSSSD x versus y (HEC) - see attachment 9
      per DSSSD E_p versus E_n (HEC) 20MeV/ch nominal - see attachment 10
      ADC & disc data synchronised - see attachment 11


15.30 DAQ start
      AIDA file RIBF148/R3_64
      BigRIPS file 2503
      BRIKEN file 31

0:04    Biases and leak currents shown as attachment #1, 12JunBias1.png
        System-wide checks: nnaida13 fails ADC calib, all others okay
        Temperatures shown as attachment #2, 12JunTemp1.png
        Implants are 20 to 40 cps, mostly in SSD2 and SSD6 see attachment #3 12JunImplant1.png
        Statistics shown attachment #4, 12JunStats1.png
        Analysis shown as R9_175.txt attachment #5
        

00:17   No implants in AIDA nor proper evt. numbers in BRIKEN R9_177, expect beam is down
        Operators call, RF dropped of IRC

00:23   Problem of another RF.

00:24   Beam is back R9_179 for AIDA

00:36   AIDA R9_182 at run close.

00:39   AIDA R9_183, BRIKEN 141, run BigRIPS 4031

00:50   We stop the beam to adjust degraders in F11.  AIDA R9_186
        BRIKEN and BigRIPS runs stopped

00:54   Removed 1.0 mm Al, added 0.5 mm (net is subtracting 0.5 mm Al)
        R9_187 AIDA run, BRIKEN #142, BigRIPS #4032

01:34   AIDA R9_198 at changeover

01:35   Same AIDA run R9_198, BRIKEN #143, BigRIPS #4033
        System wide checks okay (except ADC calib on nnaida13)

02:34   R9_214 at changeover.  

2:36    R9_215 with new runs BRIKEN 144 and BigRIPS 4034.
        More implants are now seen in SSD3 rather than SSD2.  Zeroed MIDAS histos, so updated later with stats.
        Biases as attachment #6, 12JunBiases2.png

02:45  Beam stopped R9_217.  Beam stripper has a problem.

02:48  Beam is back, R9_220

03:12  R9_224 operators call, beam is stopped from stripper foil issue

03:18  Beam is back, AIDA run R9_226

03:34  R9_230 at changeover
       System wide checks all okay, except nnaida13 ADC calib as above.

03:35  The end of R9_230 corresponds with BRIKEN 145 and BigRIPS 4034.

03:51  Operators call, beam looks stopped.  R9_235 at AIDA.  Change stripper foil

03:57  R9_236 when beam returns.

04:35  We noticed beam is gone.  R9_246 for AIDA.  

04:36  Beam comes back.  R9_247 BRIKEN 146 and BigRIPS 4035
       Attachment #7 12JunImplant2.png shows implantation profile, confirming SSD 3 is the main one with new
degrader setting
       Statistics shown as attachment #8, 12JunStats2.png
       Analysis shown as attachment #9, R9_244.txt
         No ts timewarps, no MBS timewarps, deadtime on nnaida13,21 nearly 1%, most others small.

05:20  Noticed /data10 only has ~250 GB left, so we should do something to resolve it.
       First thing is, not much compression is done recently.  So I begin to compress /TapeData/RIBF128/R7* with
nice 10
       However, compression at this rate will take much too long so it looks like something should be removed.
       Confirmed that RIBF127R1 data file names and sizes are the same between /TapeData and the new external HDD
at /ntfs

05:33  AIDA R9_262, BRIKEN 147, BigRIPS 4036

06:34  AIDA R9_279 at run change

06:36  BRIKEN run 148, BigRIPS 4037
       System-wide checks passed, except nnaida13 ADC calib still fails.

06:54  R9_284 beam is stopped.

6:59   Beam is back.

07:33  R9_295 at start of BRIKEN 149, BigRIPS 4037

07:36  No syncs are seen at BRIKEN (but they were seen at the start of other runs)
       Implant profiles shown as Attachment #10, 12JunImplants3.png
       Several resets or new runs on BRIKEN / BigRIPS are done to troubleshoot

07:48  AIDA passes all system checks (besides the nnaida13 ADC calib)
       It seems (part of) the issue is triggers from BigRIPS.

08:04  BigRIPS scalers show events are presented, but no triggers are accepted.
       Some part of the DAQ is vetoing the events basically.

08:11  Baba san came on shift.  Issue was ccnet03 crashed.  We reset the Camac crate and reinitialized, DAQ comes back
       AIDA R9_306, BRIKEN #152, BigRIPS # 4041

16:40 beam lost - stripper foil problem
      AIDA file RIBF128/R9_55

16:45 beam is back
      AIDA file R9_57


17:19 BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_66

17:21 BigRIPS starts run 4024
      BRIKEN starts run 134
      AIDA on file R9_67

17:24 beam lost
      AIDA on file R9_68

17:50 beam is still off
      BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_74

17.52 Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      good events statistics stable (nnaida13 still ~140k) - see attachment 3
      Merger and Tape server OK - see attachment 4,5

      *all* system wide checks OK except ADC calibration for nnaida13


18:00 beam is back
      BRIKEN starts run 135
      BigRIPS starts run 4025
      AIDA on file R9_76

18:05 analysis of file RIBF128/R9_77 no timewarps, 6 MBS timewarps  ~1% dead time on nnaida13 - attachment 6

18:15 beam lost. RF is down.
      AIDA on file R9_80

18:19 beam is back
      AIDA on file R9_82

19:04 BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_93

19:05 BigRIPS starts run 4026
      BRIKEN starts run 136
      AIDA on file R9_94

19:40 analysis of file RIBF128/R9_102 no timewarps, 1 MBS timewarps - attachment 7 

19:44 online high energy hit pattern - attachment 8
      AIDA on file R9_104
      zeroed Midas sort online histogram

19.50 Detector biases & leakage currents OK - see attachments 9
      FEE64 Temperatures OK - see attachment 10
      good events statistics stable - see attachment 11
      Merger and Tape server OK - see attachment 12, 13

      *all* system wide checks OK except ADC calibration for nnaida13

20:05 BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_110

20:07 BigRIPS starts run 4027
      BRIKEN starts run 137
      AIDA on file R9_111

20:11 Accelerator people stop the beam to fix the stripper system for about 30 min.
      BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_112

21:12 Beam is back
      AIDA on file R9_127

21:12 BigRIPS starts run 4028
      BRIKEN starts run 138
      AIDA on file R9_127

21:21 offline analysis RIBF128/R9_128 rates
 *** DSSSD # 1 count:    469757 old count:    409726 dt:      1.01 s  LEC rate:  59182.53 Hz
 *** DSSSD # 2 count:    688773 old count:    600379 dt:      1.01 s  LEC rate:  87144.65 Hz
 *** DSSSD # 3 count:    226922 old count:    196673 dt:      1.01 s  LEC rate:  29821.47 Hz
 *** DSSSD # 4 count:    197996 old count:    173086 dt:      1.01 s  LEC rate:  24557.93 Hz
 *** DSSSD # 5 count:     75519 old count:     66217 dt:      1.01 s  LEC rate:   9170.53 Hz
 *** DSSSD # 6 count:    161720 old count:    141631 dt:      1.01 s  LEC rate:  19805.07 Hz
 *** DSSSD # 1 count:         6 old count:         6 dt:      1.01 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:       212 old count:       179 dt:      1.01 s  HEC rate:     32.53 Hz
 *** DSSSD # 3 count:        54 old count:        49 dt:      1.01 s  HEC rate:      4.93 Hz
 *** DSSSD # 4 count:        20 old count:        16 dt:      1.01 s  HEC rate:      3.94 Hz
 *** DSSSD # 5 count:        43 old count:        37 dt:      1.01 s  HEC rate:      5.92 Hz
 *** DSSSD # 6 count:       117 old count:       105 dt:      1.01 s  HEC rate:     11.83 Hz

zeroed Midas sort histograms

21:38 beam lost due to stripper problem
      AIDA on file R9_134

21:41 analysis of file RIBF128/R9_134 no timewarps, no MBS timewarps - attachment 14

20:05 BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_138
     
22.00 Detector biases & leakage currents OK - see attachments 15
      FEE64 Temperatures OK - see attachment 16
      good events statistics OK (no beam now) - see attachment 17
      Merger and Tape server OK - see attachment 18, 19

      *all* system wide checks OK except ADC calibration for nnaida13    

22:09 beam is back
      BigRIPS starts run 4029
      BRIKEN starts run 139
      AIDA on file R9_142

22:42 online implantation profile - attachment 20
      AIDA on file R9_151
      zeroed Midas sort online histograms

23:10 BRIKEN and BigRIPS stop DAQs
      AIDA on file R9_159

23:11 BigRIPS starts run 4030
      BRIKEN starts run 140
      AIDA on file R9_159

23:37 analysis of file RIBF128/R9_165 no timewarps, 2 MBS timewarps - attachment 21

08:10 BRIKEN and BigRIPS stops DAQs
      AIDA on file R7_1287

08:11 Beam going for half an hour. Problem with vacuum around RRC

08:24 Beam is back

08:25 BigRIPS starts run 4016
      BRIKEN starts run 126
      AIDA on file R7_1291

08:32 RF down should be 5 minutes

08:44 Beam back

09:25 RF Down

09:26 BigRIPS and BRIKEN stop DAQs
      AIDA on file R7_1306

09:35 Beam back
      BigRIPS starts run 4017
      BRIKEN starts run 127
      AIDA on file R7_1308

09:53 System wide checks all ok
      Bias and leakage currents ok - attachment 1
      Good events - attachment 2
      FEE temperatures - attachment 3

10:29 BRIKEN and BigRIPS stop DAQs
      AIDA on file R7_1322

10:31 BigRIPS starts run 4018
      BRIKEN starts run 128
      AIDA on file R7_1323

11:31 BigRIPS and BRIKEN stop their DAQs
      AIDA on file R7_1338

11:32 BigRIPS starts run 4019
      BRIKEN starts run 129
      AIDA on file R7_1338

11.49 Detector biases & leakage currents OK - see attachments 4 & 5
      FEE64 Temperatures OK - see attachment 6
      good events statistics stable & OK - see attachment 7
      No warnings/errors reported by merger since DAQ GO - see attachment 8

      *all* system wide checks OK (zero fails)

11.53 online analysis
      per DSSSD x versus y (HEC) - see attachment 9
      per DSSSD E_p versus E_n (HEC) - see attachment 10
      ADC & disc data synchronised - see attachment 11

11.55 analysis of file RIBF128/R7_1344 - dead time < 0.5%, no timewarps, 1 MBS timewarps - see attachment 12

12.03 offline analysis RIBF128/R7_1346 rates

 *** DSSSD # 1 count:    942048 old count:    885423 dt:      1.04 s  LEC rate:  54296.31 Hz
 *** DSSSD # 2 count:   1402896 old count:   1319759 dt:      1.04 s  LEC rate:  79718.00 Hz
 *** DSSSD # 3 count:    422965 old count:    397383 dt:      1.04 s  LEC rate:  24529.94 Hz
 *** DSSSD # 4 count:    356558 old count:    336037 dt:      1.04 s  LEC rate:  19677.08 Hz
 *** DSSSD # 5 count:    124978 old count:    117233 dt:      1.04 s  LEC rate:   7426.49 Hz
 *** DSSSD # 6 count:    277397 old count:    260863 dt:      1.04 s  LEC rate:  15854.04 Hz
 *** DSSSD # 1 count:         6 old count:         6 dt:      1.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:       150 old count:       139 dt:      1.04 s  HEC rate:     10.55 Hz
 *** DSSSD # 3 count:        98 old count:        96 dt:      1.04 s  HEC rate:      1.92 Hz
 *** DSSSD # 4 count:        12 old count:        10 dt:      1.04 s  HEC rate:      1.92 Hz
 *** DSSSD # 5 count:        36 old count:        33 dt:      1.04 s  HEC rate:      2.88 Hz
 *** DSSSD # 6 count:       155 old count:       145 dt:      1.04 s  HEC rate:      9.59 Hz

      all SortSas spectra & histograms zero'd, waveforms set x-range = 1000ch = 2ms

12.04 BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range 2.6Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      BigRIPS 149Xe setting, F1 slits 51mm,  degrader 2mm Al (at F7), 1.3mm Al fixed + 2mm Al variable (at F11)

12.15 layout spectra - see attachments 13-20

12.20 FEE64# 1-16 power fail
      AIDA on file R7_1351

12.30 requested beam off, replaced 250V/16A/fast fuse

      nnaida13 good events rate ~250k, cycled DSSSD bias reduced to ~140k

13:06 BRIKEN starts run 130
      BigRIPS starts run 4020
      AIDA on file R9_0

13:07 Ambient Temperature +23.9 - Humidity 29.6% - Dew point +5.1C
      Leakage currents and bias ok - attachment 21
      Water level in chiller ok

14:06 BigRIPS and BRIKEN stop their daqs
      AIDA on file R9_16

14:08 BigRIPS starts run 4021
      BRIKEN starts run 131
      AIDA on file R9_16

14:31 System wide checks ok
      Good events - attachment 22
      FEE temperatures - attachment 23
      Analysis output for R9_16 - attachment 24

15:10 BRIKEN and BigRIPS stop daqs
      AIDA on file R9_32

15:11 BRIKEN starts run 132
      BigRIPS starts run 4022
      AIDA on R9_32

15:13 Leakage and bias ok - attachment 25

15:30 DSSD Rates from R9_36
 *** DSSSD # 1 count:     95157 old count:     45985 dt:      1.03 s  LEC rate:  47603.61 Hz
 *** DSSSD # 2 count:    153477 old count:     76756 dt:      1.03 s  LEC rate:  74273.90 Hz
 *** DSSSD # 3 count:     40379 old count:     20036 dt:      1.03 s  LEC rate:  19694.14 Hz
 *** DSSSD # 4 count:     46339 old count:     23014 dt:      1.03 s  LEC rate:  22581.02 Hz
 *** DSSSD # 5 count:     14241 old count:      7012 dt:      1.03 s  LEC rate:   6998.42 Hz
 *** DSSSD # 6 count:     36061 old count:     18008 dt:      1.03 s  LEC rate:  17477.18 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:      1.03 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        16 old count:         8 dt:      1.03 s  HEC rate:      7.74 Hz
 *** DSSSD # 3 count:        14 old count:         8 dt:      1.03 s  HEC rate:      5.81 Hz
 *** DSSSD # 4 count:         1 old count:         0 dt:      1.03 s  HEC rate:      0.97 Hz
 *** DSSSD # 5 count:         4 old count:         1 dt:      1.03 s  HEC rate:      2.90 Hz
 *** DSSSD # 6 count:        26 old count:        13 dt:      1.03 s  HEC rate:     12.59 Hz

16:10 BigRIPS and BRIKEN stop DAQs
      AIDA on file R9_47

16:12 BRIKEN starts run 133
      BigRIPS starts run 4023
      AIDA on file R9_47

16:18 BigRIPS slit is closing
     DSSD rates for R9_49

 *** DSSSD # 1 count:    121641 old count:     64167 dt:      1.00 s  LEC rate:  57287.24 Hz
 *** DSSSD # 2 count:    179018 old count:     93277 dt:      1.00 s  LEC rate:  85462.38 Hz
 *** DSSSD # 3 count:     52138 old count:     28005 dt:      1.00 s  LEC rate:  24054.58 Hz
 *** DSSSD # 4 count:     53927 old count:     27419 dt:      1.00 s  LEC rate:  26421.86 Hz
 *** DSSSD # 5 count:     16617 old count:      9291 dt:      1.00 s  LEC rate:   7302.19 Hz
 *** DSSSD # 6 count:     38751 old count:     19986 dt:      1.00 s  LEC rate:  18704.02 Hz
 *** DSSSD # 1 count:         1 old count:         0 dt:      1.00 s  HEC rate:      1.00 Hz
 *** DSSSD # 2 count:        52 old count:        30 dt:      1.00 s  HEC rate:     21.93 Hz
 *** DSSSD # 3 count:        12 old count:         7 dt:      1.00 s  HEC rate:      4.98 Hz
 *** DSSSD # 4 count:         3 old count:         3 dt:      1.00 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         9 old count:         5 dt:      1.00 s  HEC rate:      3.99 Hz
 *** DSSSD # 6 count:        37 old count:        19 dt:      1.00 s  HEC rate:     17.94 Hz

00:35   Stop DAQ
        AIDA file RIBF128/R7_1172

00:36   Start DAQ
        AIDA file RIBF128/R7_1172
        BRIKEN file 118
        BigRIPS file 4008

00:50   Detector biases & leakage currents OK - see attachments 4, 5 
        FEE64 Temperatures OK - see attachments 3
        good events statistics stable & OK - see attachment 2
        No warnings/errors reported by merger since DAQ GO - see attachment 1

       *all* system wide checks OK

01:33    Stop DAQ

             AIDA file RIBF128/R7_1187

01:36    Start DAQ

             AIDA file RIBF128/R7_11 87

             BRIKEN file 119

             BigRIPS file 4009

02:32    Stop DAQ

             AIDA file RIBF128/R7_1202

02:34    Start DAQ

             AIDA file RIBF128/R7_1202

             BRIKEN file 120

             BigRIPS file 4010

2:40    Detector biases & leakage currents OK - see attachments 6, 7

           FEE64 Temperatures OK - see attachments 8

            good events statistics stable & OK - see attachment 9

            No warnings/errors reported by merger since DAQ GO - see attachment 10

           implantation profile - see attachment 11

          *all* system wide checks OK

03:33    Stop DAQ

             AIDA file RIBF128/R7_1217

03:34    Start DAQ

             AIDA file RIBF128/R7_1217

             BRIKEN file 121

             BigRIPS file 4011

03:40   Detector biases & leakage currents OK - see attachments 12, 13

            FEE64 Temperatures OK - see attachments 14

            good events statistics stable & OK - see attachment 15

            No warnings/errors reported by merger since DAQ GO - see attachment 16

           implantation profile - see attachment 17

          *all* system wide checks OK

04:33    Stop DAQ

             AIDA file RIBF128/R7_1232

04:34    Start DAQ

             AIDA file RIBF128/R7_1232

             BRIKEN file 122

             BigRIPS file 4012

04:40   Detector biases & leakage currents OK - see attachments 18, 19

            FEE64 Temperatures OK - see attachments 20

            good events statistics stable & OK - see attachment 21

            No warnings/errors reported by merger since DAQ GO - see attachment 22

           implantation profile - see attachment 23

          DSSD rates - see attachment 24

          *all* system wide checks OK

05:33    Stop DAQ

             AIDA file RIBF128/R7_1248

05:34    Start DAQ

             AIDA file RIBF128/R7_1248

             BRIKEN file 123

             BigRIPS file 4013

05:40   Detector biases & leakage currents OK - see attachments 25, 26

            FEE64 Temperatures OK - see attachments 27

            good events statistics stable & OK - see attachment 28

            No warnings/errors reported by merger since DAQ GO - see attachment 29

           implantation profile - see attachment 31

          DSSD rates - see attachment 30

          *all* system wide checks OK

05:52 beam stopped due to RF problem of the cyclotron

05:58 beam back

06:30    Stop DAQ

             AIDA file RIBF128/R7_1262

06:31    Start DAQ

             AIDA file RIBF128/R7_1262

             BRIKEN file 124

             BigRIPS file 4014

06:50   Detector biases & leakage currents OK - see attachments 32, 33

            FEE64 Temperatures OK - see attachments 34

            good events statistics stable & OK - see attachment 35

            No warnings/errors reported by merger since DAQ GO - see attachment 36

           implantation profile - see attachment 37

          DSSD rates - see attachment 38

          *all* system wide checks OK

07:30    Stop DAQ

             AIDA file RIBF128/R7_1278

07:32    Start DAQ

             AIDA file RIBF128/R7_1278

             BRIKEN file 125

             BigRIPS file 4015

07:50   Detector biases & leakage currents OK - see attachments 39, 40

            FEE64 Temperatures OK - see attachments 41

            good events statistics stable & OK - see attachment 42

            No warnings/errors reported by merger since DAQ GO - see attachment 43

           implantation profile - see attachment 44

          DSSD rates - see attachment 45

           ???  *all* system wide checks: problem with AIDA17 ? -- see attachment 46

        *all* system wide checks again, looks OK now      

17.25 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics stable & OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK (zero fails)

17.30 analysis of file RIBF128/R7_1065 - dead time < 0.5%, no timewarps, 3 MBS timewarps - see attachment 6

17.35 online analysis - ADC & disc data synchronised - see attachment 7

      all SortSas spectra & histograms zero'd, waveforms set x-range = 1000ch = 2ms

18.05 BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      BigRIPS 149Xe setting, degrader 2mm Al (at F7), 1.3mm Al fixed + 2mm Al variable (at F11)

18.38 Start DAQ
      AIDA file RIBF128/R7_1083
      BRIKEN file 111
      BigRIPS file 4001

      F11 rate ~100Hz, ~50 neutrons/s

18.56 Stop DAQ
      AIDA file RIBF128/R7_1088

18.38 Start DAQ
      AIDA file RIBF128/R7_1088
      BRIKEN file 112
      BigRIPS file 4002

19.03 per DSSSD x versus y (HEC) - see attachment 8
      per DSSSD E_p versus E_n (HEC) 20MeV/ch nominal - see attachment 9
  
      Rates from offline analysis RIBF128/R7_1089

 *** DSSSD # 1 count:    258088 old count:    206122 dt:      1.03 s  LEC rate:  50652.59 Hz
 *** DSSSD # 2 count:    377054 old count:    301162 dt:      1.03 s  LEC rate:  73973.87 Hz
 *** DSSSD # 3 count:    113574 old count:     89972 dt:      1.03 s  LEC rate:  23005.47 Hz
 *** DSSSD # 4 count:    104475 old count:     83626 dt:      1.03 s  LEC rate:  20322.05 Hz
 *** DSSSD # 5 count:     34511 old count:     27812 dt:      1.03 s  LEC rate:   6529.69 Hz
 *** DSSSD # 6 count:     78446 old count:     62771 dt:      1.03 s  LEC rate:  15278.82 Hz
 *** DSSSD # 1 count:         2 old count:         2 dt:      1.03 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        95 old count:        76 dt:      1.03 s  HEC rate:     18.52 Hz
 *** DSSSD # 3 count:        30 old count:        24 dt:      1.03 s  HEC rate:      5.85 Hz
 *** DSSSD # 4 count:        12 old count:         8 dt:      1.03 s  HEC rate:      3.90 Hz
 *** DSSSD # 5 count:        27 old count:        24 dt:      1.03 s  HEC rate:      2.92 Hz
 *** DSSSD # 6 count:        81 old count:        67 dt:      1.03 s  HEC rate:     13.65 Hz

19.21 Detector biases & leakage currents OK - see attachments 10 & 11
      FEE64 Temperatures OK - see attachment 12
      good events statistics stable & OK - see attachment 13
      No warnings/errors reported by merger since DAQ GO - see attachment 14

      *all* system wide checks OK (zero fails)

19.30 analysis of file RIBF128/R7_1095 - dead time 1%, no timewarps, 1 MBS timewarps - see attachment 15

20.00 Stop DAQ
      AIDA file RIBF128/R7_1104

18.38 Start DAQ
      AIDA file RIBF128/R7_1104
      BRIKEN file 113
      BigRIPS file 4003

      BigRIPS slit change and n background check

20.27 Stop DAQ
      AIDA file RIBF128/R7_1111

20.28 Start DAQ
      AIDA file RIBF128/R7_1111
      BRIKEN file 114
      BigRIPS file 4004

      BigRIPS F1 slits changed

20.28 all SortSas spectra zero'd


21.15 Start DAQ
      AIDA file RIBF128/R7_1123
      BRIKEN file 115
      BigRIPS file 4005

21.32 RF down

22.15 Stop DAQ
      AIDA file RIBF128/R7_1138

20.28 Start DAQ
      AIDA file RIBF128/R7_1138
      BRIKEN file 116
      BigRIPS file 4006

22.37 Detector biases & leakage currents OK - see attachments 16 & 17
      FEE64 Temperatures OK - see attachment 18
      good events statistics stable & OK - see attachment 19
      No warnings/errors reported by merger since DAQ GO - see attachment 20

      *all* system wide checks OK (zero fails)

22.42 analysis of file RIBF128/R7_1095 - dead time ~1%, no timewarps, 2 MBS timewarps - see attachment 21

22.48 online analysus
      per DSSSD x versus y (HEC) - see attachment 22
      per DSSSD E_p versus E_n (HEC) 20MeV/ch nominal - see attachment 23
      ADC & disc data synchronised - see attachment 24

      offline analysis RIBF128/R7_1146 rates

 *** DSSSD # 1 count:    389187 old count:    340234 dt:      1.02 s  LEC rate:  47972.00 Hz
 *** DSSSD # 2 count:    562493 old count:    494318 dt:      1.02 s  LEC rate:  66808.79 Hz
 *** DSSSD # 3 count:    168279 old count:    147281 dt:      1.02 s  LEC rate:  20577.21 Hz
 *** DSSSD # 4 count:    156439 old count:    136327 dt:      1.02 s  LEC rate:  19708.96 Hz
 *** DSSSD # 5 count:     52041 old count:     45539 dt:      1.02 s  LEC rate:   6371.70 Hz
 *** DSSSD # 6 count:    121463 old count:    106320 dt:      1.02 s  LEC rate:  14839.54 Hz
 *** DSSSD # 1 count:         1 old count:         1 dt:      1.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        66 old count:        57 dt:      1.02 s  HEC rate:      8.82 Hz
 *** DSSSD # 3 count:        41 old count:        35 dt:      1.02 s  HEC rate:      5.88 Hz
 *** DSSSD # 4 count:         1 old count:         1 dt:      1.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:        11 old count:        11 dt:      1.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:        82 old count:        66 dt:      1.02 s  HEC rate:     15.68 Hz


23.15 Stop DAQ
      AIDA file RIBF128/R7_1153

23.15 Start DAQ
      AIDA file RIBF128/R7_1153
      BRIKEN file 117
      BigRIPS file 4007

23.38 beam lost - RF restart
      AIDA file RIBF128/R7_1158

10:40    Put lead wall in front of AIDA during beam tuning.

12.30 BNC PB-4 Pulser OFF
      AIDA file RINF128/R7_998

12.31  E17/F11 ambient temperature +24.7 deg C, RH 42.2%, d.p. +10.7 deg C
       Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)

12.53 analysis RIBF128/R7_1002 <0.5% dead-time, zero ts & MBS timewarps - see attachment 1

13:12 R7_1006 is the last run with 100% no pulser.  Pulser turned on around 400 MB into R7_1007

00:21  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_826

00:23  BRIKEN starts run 101
       BigRIPS starts run 3107
       AIDA on file R7_827

00:26  Offline Analysis of file RIBF128/R7_826- zero timewarps, zero MBS timewarps - see attachment 1
       High Energy hit pattern spectra - see attachment 2
       AIDA on file R7_828
       zeroed Midas sort online spectra

00:36  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 3
       Good events statistics OK - see attachment 4
       Merger and tape server running - see attachment 5, 6
       Detector biases and leakage currents OK - see attachment 7

01:22  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_841

01:24  BRIKEN starts run 102
       BigRIPS starts run 3108
       AIDA on file R7_841

02:22  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_855

02:23  BRIKEN starts run 103 
       BigRIPS starts run 3109
       AIDA on file R7_856

02:25  Offline Analysis of file RIBF128/R7_855- zero timewarps, 2 MBS timewarps - see attachment 8
       High Energy hit pattern spectra - see attachment 9
       AIDA on file R7_856
       zeroed Midas sort online spectra

02:30  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 10
       Good events statistics OK - see attachment 11
       Merger and tape server running - see attachment 12, 13
       Detector biases and leakage currents OK - see attachment 14

03:24  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_870

03:26  BRIKEN starts run 104
       BigRIPS starts run 3110
       AIDA on file R7_871

03:42 fRC RF is down, beam is off

03:46 beam is back

04:18 beam is off, fRC RF is down

04:21 beam is back

04:31  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_886

04:32  BRIKEN starts run 105
       BigRIPS starts run 3111
       AIDA on file R7_887

04:35  Offline Analysis of file RIBF128/R7_886- zero timewarps, 1 MBS timewarps - see attachment 15
       High Energy hit pattern spectra - see attachment 16
       AIDA on file R7_887
       zeroed Midas sort online spectra

04:39  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 17
       Good events statistics OK - see attachment 18 
       Merger and tape server running - see attachment 19, 20
       Detector biases and leakage currents OK - see attachment 21

05:31  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_901

05:32  BRIKEN starts run 106
       BigRIPS starts run 3112
       AIDA on file R7_901

06:30  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_916

06:31  BRIKEN starts run 107
       BigRIPS starts run 3113
       AIDA on file R7_916

06:35  Offline Analysis of file RIBF128/R7_915- zero timewarps, 2 MBS timewarps - see attachment 22
       High Energy hit pattern spectra - see attachment 23
       AIDA on file R7_917
       zeroed Midas sort online spectra

06:37  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 24
       Good events statistics OK - see attachment 25
       Merger and tape server running - see attachment 26,27
       Detector biases and leakage currents OK - see attachment 28

06:46 RRC power is down, it may take more than 1 hour to fix the problem
      AIDA on file R7_920

06:48  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_920

06:52  BRIKEN starts run 108 (background run without beam)
       AIDA on file R7_921

17:06 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R7_723

17:08 BigRIPS starts run 3100
      BRIKEN starts run 94
      AIDA on file R7_724

18:11 Stop BRIKEN/BigRIPS run. AIDA at R7_739

18:13 Start new run: BRIKEN 95, BigRIPS run 3103
      AIDA run R7_740
      Beam stopped right when the run was started.

18:17 Beam back, with intensity about 49 pnA

18:43 AIDA leakage currents [uA]: 4.665 5.325 5.705 5.125 5.05 4.25

19:09 BRIKEN starts run 096
      BigRIPS starts run 3102
      AIDA on file R7_753

20:11 Beam stop due to SRC issue. BRIKEN/BigRIPS runs stopped

20:17 Beam is back (49 pnA)
      BRIKEN starts run 097
      BigRIPS starts run 3103
      AIDA on file R7_769

21:00 There have been frequent interruptions of beam (FRC/SRC issues) during the last two to three hours.
Usually resolved after a few minutes, with the beam continuing with good current.

21:12 BRIKEN starts run 098
      BigRIPS starts run 3104
      AIDA on file R7_782

      Screenshot for stats and temperature during R7_783 attached (att. 2 and 3)
      Screenshot for energy spectra of FEE12 and 9 as attachment 4 and 5 (around run R7_785)

21:58 BRIKEN starts run 099
      BigRIPS starts run 3105
      AIDA on file R7_793

23:12 BRIKEN starts run 100
      BigRIPS starts run 3106
      AIDA on file R7_810

x-scale 1000ch = 2ms
y-scale expanded

p+n junction strips

DSSSD #1 .. #6 attachments 1-12

n+n ohmic strips

DSSSD #1 .. #6 attachments 13-24

DSSSD #4 pulser off, attachments 25-28

08:06 System wide checks all ok
         implantation profile - attachment 1 
         count rate - attachment 2
         Bias and leakage currents ok - attachment 3 
         DAQstatistics

08:30 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R7_604

08:32 BigRIPS starts run 3090
      BRIKEN starts run 85
      AIDA on file R7_604

08:44   BRIKEN and BigRIPS stop their DAQs

            AIDA on file R7_607

08:49    BigRIPS starts run 3091

             BRIKEN starts run 86

             AIDA on file R7_608

09:42      BRIKEN and BigRIPS stop their DAQs

              AIDA on file R7_621

 *** DAQ synchronisation reset ***

see BRIKEN 2017 Elog http://ribf-exp.riken.jp/elog/BRIKEN2017-June/323

09:51    BigRIPS starts run 3093

             BRIKEN starts run 87

             AIDA on file R7_623

10:06   System wide checks all ok

            Bias and leakage currents ok - attachment 5
           count rate - attachment 6

            implantation profile - attachment 7

          FEE temperature - attachment 8
     

10.30 layout spectra - see attachments 9-18

analysis of RIBF128/R7_630 - deadtime < 0.5%, no ts timewarps, 4x MBS timewarps - see attachment 19

online analysis - ADC & disc data synchronsed - see attachment 20

10.36 all histograms and SortSas spectra zero'd

10:53   BRIKEN and BigRIPS stop their DAQs

            AIDA on file R7_636

10:54             

            BigRIPS starts run 3094

            BRIKEN starts run 88

            AIDA on file R7_636

11:49    BigRIPS and BRIKEN stop their DAQ

            AIDA on file R7_649

11:49   BigRIPS starts run 3095

           BRIKEN starts run 89

          AIDA on file R7_649

12:15 system wide checks -- OK

         see attchments  21-26

12.54 DAQ stop

AIDA file RIBF128/R7_664

12.55 DAQ start

AIDA file RIBF128/R7_664

BRIKEN file 3096

BigRIPS file 90

13.55 BigRIPS team entered the beam line area to place a 1.5 mm Al degrader

          DAQ stop

          AIDA file on  RIBF128/R7_679

          BRIKEN file 3096

          BigRIPS file 90

14:03     BigRIPS starts run 3097

          BRIKEN starts run 91

          AIDA on file R7_680

14:52    beam stopped

15:00   BRIKEN and BigRIPS stop their DAQs

            AIDA on file R7_694

15:02            

            BigRIPS starts run 3098

            BRIKEN starts run 92

            AIDA on file R7_694

15:48  beam stopped

15:52  beam back

16:06   BRIKEN and BigRIPS stop their DAQs

            AIDA on file R7_709

16:08           

            BigRIPS starts run 3099

            BRIKEN starts run 93

            AIDA on file R7_710

16:20   system wide checks--OK

          see attachments 27-32

17:06   BRIKEN and BigRIPS stop their DAQs

            AIDA on file R7_723

17:08           

            BigRIPS starts run 3100

            BRIKEN starts run 94

            AIDA on file R7_724

00:06 System wide checks all ok
      Bias and leakage currents ok - attachment 1
      Good event statistics - attachment 2
      FEE temperatures - attachment 3

00:29 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R7_494

00:31 BigRIPS starts run 3080
      BRIKEN starts run 77
      AIDA on file R7_494

01:31 BigRIPS and BRIKEN stop DAQs
      AIDA on file R7_508

01:33 BRIKEN starts run 78
      BigRIPS starts run 3081
      AIDA on file R7_508

02:10 System wide checks all ok
      Bias and leakage ok - attachment 4
      Good event statistics - attachment 5
      FEE temperatures - attachment 6

02:30 BRIKEN and BigRIPS stop their DAQs
      AIDA on file R7_211

02:32 BigRIPs started Run 3082
      BigRIPS stopped

02:33 Beam stopped to put and extra 1mm of degrader in to shift beam
      Current degrader settings:
      F7 = 2mm Al
      F11 = 4.5mm Al

02:39 biGRIPS starts run 3083
      BRIKEN starts run 79
      AIDA on file R7_523

      DSSD rates from R7_235
 *** DSSSD # 1 count:    119355 old count:     78874 dt:      1.05 s  LEC rate:  38696.78 Hz
 *** DSSSD # 2 count:    188044 old count:    124828 dt:      1.05 s  LEC rate:  60429.72 Hz
 *** DSSSD # 3 count:     53151 old count:     34736 dt:      1.05 s  LEC rate:  17603.35 Hz
 *** DSSSD # 4 count:     61647 old count:     40919 dt:      1.05 s  LEC rate:  19814.40 Hz
 *** DSSSD # 5 count:     14623 old count:      9739 dt:      1.05 s  LEC rate:   4668.74 Hz
 *** DSSSD # 6 count:     41905 old count:     27687 dt:      1.05 s  LEC rate:  13591.33 Hz
 *** DSSSD # 1 count:         1 old count:         1 dt:      1.05 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        11 old count:         7 dt:      1.05 s  HEC rate:      3.82 Hz
 *** DSSSD # 3 count:        19 old count:        10 dt:      1.05 s  HEC rate:      8.60 Hz
 *** DSSSD # 4 count:        15 old count:        10 dt:      1.05 s  HEC rate:      4.78 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:      1.05 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         3 old count:         2 dt:      1.05 s  HEC rate:      0.96 Hz

03:37 bigRIPS and BRIKEN stop their daqs
      AIDA on file R7_537

03:39 BigRIPS starts run 3084
      BRIKEN starts run 80
      AIDA on file R7_537

04:16 System wide checks ok
      Leakage and bias ok - attachment 7
      Good events - attachment 8
      FEE temperatures - attachment 9

04:33 BRIKEN AND BigRIPS stop daqs
      AIDA on file R7_549

04:34 BRIKEN starts run 81
      BigRIPS starts run 3085
      AIDA on file R7_550

05:30 BigRIPS and BRIKEN stop their DAQs
      AIDA on file R7_563

05:40 bigRIPS starts run 3086
      BRIKEN starts run 82
      AIDA on R7_565

06:14 System wide checks all ok
      Bias and leakages ok - attachment 10
      Good events - attachment 11
      FEE temperatures - attachment 12

06:33 BigRIPS and BRIKEN stop their DAQs
      AIDA on file R7_577

06:34 BigRIPS starts run 3087
      BRIKEN starts run 83
      AIDA on file R7_577

07:30 BRIKEN and BigRIPS stop daqs
      AIDA on file R7_590

07:31 BigRIPS starts run 3088
      BRIKEN starts run 84
      AIDA on file R7_591

16:13  DAQ still running

16:34  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_388

16:36  BRIKEN starts run 069
       BigRIPS starts run 3072
       AIDA on file R7_389

16:37  Analysis of file RIBF128/R7_387 - zero timewarps, four MBS timewarps - see attachment 1

16:41  Beam is OFF 

16:43  Beam is ON

17:04  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 2
       Good events statistics OK - see attachment 3 
       Merger and tape server running - see attachment 4,5 

17:06  Detector biases & leakage currents OK - see attachment 6

17:37  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_402

17:40  BRIKEN starts run 070
       BigRIPS starts run 3073
       AIDA on file R7_403

18:32  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_415

18:34  BRIKEN starts run 071
       BigRIPS starts run 3074
       AIDA on file R7_416

18:36  Offline Analysis of file RIBF128/R7_412 - zero timewarps, zero mbs timewarps - see attachment 7

18:58  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 8
       Good events statistics OK - see attachment 9 
       Merger and tape server running - see attachment 10,11
       Detector biases and leakage currents OK - see attachment 12

19:34  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_428

19:35  BRIKEN starts run 072
       BigRIPS starts run 3075
       AIDA on file R7_429

20:08  Offline Analysis of file RIBF128/R7_434 - zero timewarps, one mbs timewarps - see attachment 13

20:10  High Energy Correlation spectra - see attachment 14
       AIDA on file R7_436

20:37  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_442

20:37  BRIKEN starts run 073
       BigRIPS starts run 3076
       AIDA on file R7_443

21:37  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_455

21:38  BRIKEN starts run 074
       BigRIPS starts run 3077
       AIDA on file R7_455


22:00  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 15
       Good events statistics OK - see attachment 16
       Merger and tape server running - see attachment 17,18
       Detector biases and leakage currents OK - see attachment 19

22:10  Offline Analysis of file RIBF128/R7_434 - zero timewarps, one mbs timewarps of FEE No.6 - see attachment 20

22:26 High energy hit pattern - see attachment 21
      AIDA on file 466
      Zero'd online spectra

22:39  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_469

22:40  BRIKEN starts run 075
       BigRIPS starts run 3078
       AIDA on file R7_470

23:42  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_483

23:43  BRIKEN starts run 076
       BigRIPS starts run 3079
       AIDA on file R7_484

23:47  Offline Analysis of file RIBF128/R7_480 - zero timewarps, one mbs timewarps - see attachment 22

08:54 DAQ still running

09:01 BRIKEN and BigRIPS stop daqs
      AIDA on file R7_293
      Beam stopped

09:25 System wide checks ok
      Bias and leakage ok - attachment 1
      Good event statistics - attachment 2
      FEE temperatures - attachment 3

13:36 Beam about to be back
      Briken on Run 65 (Background)
      AIDA on file 350

13:37 Beam is returned
      BRIKEN starts run 66
      bigRIPS run 3069
      AIDA on file R7_350
      System wide checks ok

13:40 Bias and leakage ok - attachment 4
      Good event - attachment 5
      FEE temperatures - attachment 6

14:00 Beam down originally five minutes

14:08 Beam will be down for another 20 minutes
      BRIKEN and BigRIPS stop daqs
      AIDA on file R7_356

14:22 beam is back

14:23 BigRIPS starts run 3070
      Briken starts run 67
      AIDA on file R7_360

15.23 DAQ stop
      AIDA file RIBF128/R7_373

15:26 BigRIPS starts run 3071
      Briken starts run 68
      AIDA on file R7_374

15.29 beam off - back in 5 mins
      AIDA file RIBF128/R7_374

15.44 beam back
      AIDA file RIBF128/R7_377
          

00:05  Shift change.
       Primary beam current ~4800 enA, 238U^86+ so 50 to 60 pnA.
       Biases shown as attachment #1, 08JunBias1.png
       Analysis of R7_176 as attachment #2, 08 JunStats1.txt
          3 MBS timewarps seen, no global timewarps
       Implant rate is low, maybe 5 to 10 cps at AIDA
       All system-wide checks are passed.
          Sync pulses about 50% of last night, 18 x 10^6 because of run restart at 10:00
          FEE64 memory consistent, about 36k ~ 39k

00:35  AIDA at R7_183 when runs stopped.

00:36  AIDA still R7_183 when runs starts: BRIKEN #57, BigRIPS: #3059

01:14  Statistics shown as attachment #3, 08JunStats.png

1:32   AIDA R7_195 at stop of runs

1:33   AIDA R7_196, BRIKEN #58, BigRIPS #3060
       System wide checks all okay.

2:01   Operators called: RF is down.  It should be recovered in a short time.  AIDA R7_202 at that time.
       Biases and leak currents as attachment #4, 08JunBias2.png

2:07   Beam is back.  AIDA R7_203 at that time

2:29   Biases shown as attachment #5, 8JunBias2.png
       Analysis of R7_207 as attachment #6,analysis_R7_207.txthon
       4 MBS timewarps seen, no global timewarps
       All system-wide checks are passed.

(Beam was stopped for a couple minutes here)

2:38   AIDA R7_210 at run change-over

2:39   AIDA R7_210 (same); BRIKEN #59, BigRIPS #3061
       All system wide checks are passed, with similar information as before.
       FEE temps look okay, see attachment #7, 08JunTemp1.png

3:30   AIDA R7_221 at run change-over
       All system-wide checks are passed

3:31   AIDA R7_221, BRIKEN #60, BigRIPS #3061

3:59   Phone rings, AIDA R7_228 RF drops again

4:03   Beam is back, AIDA R7_228 still

4:34   Biases and leak currents shown as attachment #8, 08JunBias3.png
       R7_236 at AIDA just began during the changeover

4:38   AIDA R7_236 still, BRIKEN run #61, BigRIPS run #3062
       All system wide checks are passed.
       Analysis shown as R7_235.txt attachment #9
          No timewarps, no MBS timewarps

5:30   AIDA R7_247 at changeover
       All system-wide checks are passed

5:51   AIDA R7_252
       NB: BRIKEN and AIDA are not synchronized

5:58   AIDA R7_253, BRIKEN #62; BigRIPS #3066
       Now they are synchronized

6:11   Biases and leak currents shown as 08JunBias4.png, attachment #10

7:05   AIDA R7_268 at run changeover 
       All system wide checks are passed as normal

       Now BRIKEN #63; BigRIPS 3067

       Statistics shown as attachment #11 08JunStats2.png
       Warp data shown as attachment #12 R7_268.txt
         no warps, no MBS warps
       
8:00   Biases and leak currents shown as 08JunBias5.png, attachment #13
       R7_280 at run changeover
       BRIKEN #64; BigRIPS #3067

16:02 System wide checks ok
      Good Events statistics (No beam at time!)- attachment 1
      Fee temperatures - attachment 2
      Bias and leakage ok - attachment 3

16:29 BigRIPS starts run 3051
      BRIKEN starts run 49
      AIDA on file R7_80

      Slits brought in to reduce rate to attempt implant-neutron correlation

16:39 DSSD rates from R7_81
 *** DSSSD # 1 count:    182087 old count:    144548 dt:      1.02 s  LEC rate:  36716.57 Hz
 *** DSSSD # 2 count:    295938 old count:    235754 dt:      1.02 s  LEC rate:  58865.45 Hz
 *** DSSSD # 3 count:     80412 old count:     64397 dt:      1.02 s  LEC rate:  15664.13 Hz
 *** DSSSD # 4 count:     94793 old count:     75541 dt:      1.02 s  LEC rate:  18830.22 Hz
 *** DSSSD # 5 count:     23432 old count:     18547 dt:      1.02 s  LEC rate:   4777.98 Hz
 *** DSSSD # 6 count:     66315 old count:     53096 dt:      1.02 s  LEC rate:  12929.39 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:      1.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         8 old count:         4 dt:      1.02 s  HEC rate:      3.91 Hz
 *** DSSSD # 3 count:        23 old count:        20 dt:      1.02 s  HEC rate:      2.93 Hz
 *** DSSSD # 4 count:        38 old count:        32 dt:      1.02 s  HEC rate:      5.87 Hz
 *** DSSSD # 5 count:        13 old count:        10 dt:      1.02 s  HEC rate:      2.93 Hz
 *** DSSSD # 6 count:        11 old count:         8 dt:      1.02 s  HEC rate:      2.93 Hz

17:13 BigRIPS and BRIKEN stop DAQS
      AIDA on file R7_89

17:30 Beam back
      BigRIPS starts run 3052
      BRIKEN starts run 50
      AIDA on file R7_93

17:52 Analysis of R7_93 No timewarps, no MBS timewarps - attachment 4

18:06 System wide checks all ok 
      Bias and leakage ok - attachment 5
      Good events statistics - attachment 6
      FEE temperatures ok - attachment 7

18:27 fRC problem, beam is off
      
18:29 BigRIPS and BRIKEN stop DAQS
      AIDA on file R7_106

18:32 Beam is back
      BigRIPS starts run 3053
      BRIKEN starts run 51
      AIDA on file R7_106

19:33 BigRIPS and BRIKEN stop daqs
      AIDA on file R7_119

19:34 BRIKEN starts run 52
      BigRIPS starts run 3054
      AIDA on file R7_120

20:09 System wide checks ok
      Bias and leakage ok - attachment 8
      Good event statistics - attachment 9
      Fee temperatures - attachment 10

20:28 BigRIPS and BRIKEN stop their DAQs
      AIDA on file R7_131

20:30 BigRIPS starts run 3055
      BRIKEN starts run 53
      AIDA on file R7_131

20:41 Layout 3 - attachment 11
      1.8.L spectrum for each FEE
      Appears to be 4-5 pulser peaks

21:31 BRIKEN and BigRIPS stop their daqs
      AIDA on file R7_144

21:32 BRIKEN starts run 54
      BigRIPS starts run 2056
      AIDA on file R7_144

22:03 System wide checks ok
      Bias and leakage ok - attachment 12
      Good events statistics - attachment 13
      Fee temperatures - attachment 14
      

22:32 Briken and BigRIPS stop their daqs
      AIDA on file R7_156

22:33 BigRIPS starts run 3057
      BRIKEN starts run 55
      AIDA on file R7_156

23:31 BigRIPS and BRIKEN stop their DAQs
      AIDA on file R7_169

23:32 BigRIPS starts run 3058
      BRIKEN starts run 56
      AIDA on file R7_169

23:46 Analysis of R7_168 - attachmemt 15

08:12    Analysis of file RIBF128/R6_438 - zero timewarps, four MBS timewarps - see attachment 1

08:23    Online analysis (per DSSSD rates) of R6_443,  see attachment 2

08:35    BigRIPS and BRIKEN stop their DAQ
         AIDA run file R6_446

08:40    BRIKEN starts run 043
         BigRIPS starts run 3040
         AIDA on file R6_448

09:16    *All* system wide checks OK 
         FEE64 Temperatures OK - see attachment 3
         Good events statistics OK - see attachment 4 
         Detector biases & leakage currents OK - see attachment 5
         Merger and tape server running - see attachment 6,7 

09:51    Beam is OFF, RC is down

09:53    BigRIPS and BRIKEN stop their DAQ
         AIDA run file R6_470

10:00    Beam is ON

10:01    BRIKEN starts run 044
         BigRIPS starts run 3041
         AIDA on file R6_472

10:07    AIDA DAQ crashed (fuse blown)
         AIDA on file R6_474

10:14    BigRIPS and BRIKEN stop their QAD
         AIDA on file R6_474
         
10:25  E17/F11 ambient temperature +24.3 deg C, RH 42.7%, d.p. +10.9 deg C
       Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

       BNC PB-4 analogue output BNC T replaced by BNC-Lemo00 adaptor and Lemo00 T 
         
11:08    AIDA DAQ running (recovered) 

11:10    BRIKEN starts run 045
         BigRIPS starts run 3043
         AIDA on file R7_1
         (BigRIPS run 3042 was used to check synchronization) 

11:21    *All* system wide checks OK 
         FEE64 Temperatures OK - see attachment 8
         Good events statistics OK - see attachment 9 
         Detector biases & leakage currents OK - see attachment 10
         Merger and tape server running - see attachment 11,12 

11:28    Analysis of file RIBF128/R7_4 - zero timewarps, two MBS timewarps - see attachment 13

12:13    BigRIPS and BRIKEN stop their DAQ
         AIDA run file R7_16

12:13    BRIKEN starts run 046
         BigRIPS starts run 3044
         AIDA on file R7_17     

12:21    Analysis of file RIBF128/R7_15 - zero timewarps, two MBS timewarps - see attachment 14    

12:23    High Energy Correlation spectra - see attachment 15
         AIDA on file R7_20
         
13.00 Detector biases & leakage currents OK - see attachments 16 & 17
      FEE64 Temperatures OK - see attachment 18
      good events statistics OK - see attachment 19
      No warnings/errors reported by merger since DAQ GO - see attachment 20

      *all* system wide checks OK

13.06 analysis of file RIBF128/R7_30 - dead time < 0.5%, 0 ts & 1 MBS timewarps - see attachment 21

13.10 online analysis - ADC data synchronised - see attachment 22
      per DSSSD HEC x versus y spectra - see attachment 23
      per DSSSD HEC E_p versus E_n spectra - see attachment 24

13.12 per DSSSD rates file RIBF128/R7_33

 *** DSSSD # 1 count:    100283 old count:     52419 dt:      1.00 s  LEC rate:  47699.10 Hz
 *** DSSSD # 2 count:    143318 old count:     73956 dt:      1.00 s  LEC rate:  69123.04 Hz
 *** DSSSD # 3 count:     61925 old count:     31310 dt:      1.00 s  LEC rate:  30509.53 Hz
 *** DSSSD # 4 count:     42834 old count:     21364 dt:      1.00 s  LEC rate:  21396.03 Hz
 *** DSSSD # 5 count:     10974 old count:      5692 dt:      1.00 s  LEC rate:   5263.80 Hz
 *** DSSSD # 6 count:     29846 old count:     15307 dt:      1.00 s  LEC rate:  14488.91 Hz
 *** DSSSD # 1 count:         3 old count:         1 dt:      1.00 s  HEC rate:      1.99 Hz
 *** DSSSD # 2 count:        34 old count:        23 dt:      1.00 s  HEC rate:     10.96 Hz
 *** DSSSD # 3 count:        96 old count:        51 dt:      1.00 s  HEC rate:     44.84 Hz
 *** DSSSD # 4 count:        85 old count:        51 dt:      1.00 s  HEC rate:     33.88 Hz
 *** DSSSD # 5 count:         8 old count:         4 dt:      1.00 s  HEC rate:      3.99 Hz
 *** DSSSD # 6 count:         8 old count:         4 dt:      1.00 s  HEC rate:      3.99 Hz

       all SortSas spectra & histograms zero'd

13.13  DAQ stop
       AIDA run file R7_33

13.15  BRIKEN starts run 47
       BigRIPS starts run 3045 *** N.B. by mistake BRIKEN DAQ not actually started ***
       AIDA on file R7_ 33  

       BNC PB-4
       Amplitude 90,000
       x5 attenuator IN
       t_r 100ns tau_d 50us
       - polarity
       frequency 25Hz range
       delay MIN, tail pulse, INT ref

       ASIC settings 2017Mar27-16.12.39

       84Zn BigRIPS setting, 130Ag degrader setting - 2mm Al (in F7) + 3mm fixed + 1mm variable (in F11) = 6 mm Al

13.23  Beam stop to fix problem with STQ
       DAQ stop
       AIDA file RIBF128/R7_35

14:00  Beam is ON
       AIDA file R7_43

14:01  BRIKEN starts run 48
       BigRIPS starts run 3046
       AIDA on file R7_ 44  

14:48  Detector biases & leakage currents OK - see attachment 25

14:56  *All* system wide checks OK 
       FEE64 Temperatures OK - see attachment 26
       Good events statistics OK - see attachment 27 
       Merger and tape server running - see attachment 28,29 

15:16  BigRIPS and BRIKEN stop their DAQ
       AIDA run file R7_64


15:25  Analysis of file RIBF128/R7_60 - zero timewarps, zero MBS timewarps - see attachment 30

7 June 2017   

00:05  All system-wide checks are passed
       Sync pulses nera 44 x 10^6
       Memory 35k ~ 38k
       Biases uploaded as 33.png, 34.png - attachments 1 & 2
          Entered into spreadsheet
          SSD 3 bias is going up slowly since this isotope setting began
       Around "2 to 4" Hz in SSDs 3 and 4 -> 50 to 80 pps implant rate
          See attachment 3, 35.png
       All rates under 100k except nnaida 13, 21
          See attachment 4, 36.png
       FEE temperatures shown as 37.png, attachment #5

00:30  BRIKEN number 32, AIDA R6_299, BigRIPS 3032

01:01  Timewarps look okay (only 2 MBS seen in FEE 6)
          See R6_307 - attachment #6

01:30  BRIKEN and BigRIPS runs stopped.  AIDA R6_317 at that time.

01:31  AIDA R6_318, BRIKEN run #33, BigRIPS #3033

       All system-wide checks passed.
       SYNC pulses 46 x 10^6
       Memory 35 ~ 39k

02:08  Biases shown as 38.png, attachment #7

02:34  AIDA run R6_337 when BRIKEN and BigRIPS runs are stopped.

AIDA passes all system-wide checks.

02:37  AIDA just begins R6_338l.  BRIKEN run #34, BigRIPS #3034

Timewarps look okay, see attachment #8, R6_336
Statistics consistent, see attachment #9, 39.png
Implant rate around 75 cps

03:31  AIDA run R6_354 at the stop of BRIKEN and BigRIPS runs


03:34  AIDA R6_355, BRIKEN run #35, BigRIPS #3035

AIDA passed all system checks.  Merger shows low rate for nnaida8, but this is consistent for tonight.

4:03 Biases shown as 40.png, attachment #10.

4:08 Stats shown as 41.png, attachment #11
     As before, only nnaida13 and nnaida21 show over 100k, and nnaida8 is quite low.

4:30 AIDA run R6_372 at the close of BRIKEN and BigRIPS runs.

4:32 AIDA R6_373 with new BRIKEN run #36 and BigRIPS #3036.
     All system-wide checks okay.

5:38 AIDA R6_393 at the stop of BRIKEN and BigRIPS runs
     All system-wide checks okay.

5:39 AIDA still R6_393, BRIKEN run #37 and BigRIPS run #3037

6:00 Leak currents shown as 42.png, attachment #12

6:16 Beam stopped so we can check the signal of one Ge detector that became noisy
     R6_404 at that time
     Added some Al foil to the Ge signal cables

6:28 Beam is back R6_408

6:29 BRIKEN run #41, BigRIPS #38

7:28 AIDA R6_426 at stop of other runs
     System-wide checks are okay.

7:30 AIDA R6_427.  BRIKEN #42, BigRIPS #39
     Implant rates 60 ~ 70 cps in AIDA
     One MBS timewarp in R6_426, as attachment #13

7:57 Leak currents shown as attachment #14, 43.png

15.53    Bias and leakage currents ok - attachments 1 & 2 
         FEE temperatures ok - attachment 3 
         statistics good events still seeing noise on 13 and 14 - attachment 4 
         No merger errors since GO - attachment 5 

16:00    all system wide checks OK 
15:59    BigRIPS and BRIKEN stop daqs 
         AIDA on file R6_147 

16:02    BigRIPS starts run 3023 
         BRIKEN starts run 23 
         AIDA on file R6_148 
         
         implant hit pattern statistics until the end of R6_147: attachment6 spectra cleared 


17:00    BigRIPS and BRIKEN stop daqs 
         AIDA on file R6_165 
17:02    BigRIPS starts run 3024 
         BRIKEN starts run 24 
         AIDA on file R6_166 

18:03    BigRIPS and BRIKEN stop daqs 
         AIDA on file R6_183 

18.04    BigRIPS starts run 3025 
         BRIKEN starts run 25 
         AIDA on file R6_184 

18.18    Detector biases & leakage currents OK - see attachments 8 & 9 
         FEE64 Temperatures OK - see attachment 10 
         good events statistics OK - high but relatively stable - see attachment 11 
         No warnings/errors reported by merger since DAQ GO - see attachment 12 
         *all* system wide checks OK 

18.23    analysis of file RIBF128/R6_188 - dead time < 0.5%, 0x ts timewarps, 1x MBS timewarps - see attachment 13 
          online analysis per DSSSD HEC x versus y spectra - see attachment 14 

18.28    offline analysis R6_196 - ADC &amp; disc data synchronised - see attachment 14 
         rates *** 
         DSSSD # 1 count: 579778 old count: 507154 dt: 1.02 s LEC rate: 71359.29 Hz *** 
         DSSSD # 2 count: 824589 old count: 719407 dt: 1.02 s LEC rate: 103350.31 Hz 
         DSSSD # 3 count: 344253 old count: 299859 dt: 1.02 s LEC rate: 43620.90 Hz *** 
         DSSSD # 4 count: 241567 old count: 210328 dt: 1.02 s LEC rate: 30694.99 Hz *** 
         DSSSD # 5 count: 70435 old count: 61399 dt: 1.02 s   LEC rate: 8878.64 Hz *** 
         DSSSD # 6 count: 154453 old count: 135358 dt: 1.02 s LEC rate: 18762.47 Hz *** 
         
         DSSSD # 1 count: 4 old count: 2 dt: 1.02 s HEC rate: 1.97 Hz *** 
         DSSSD # 2 count: 113 old count: 96 dt: 1.02 s HEC rate: 16.70 Hz *** 
         DSSSD # 3 count: 437 old count: 386 dt: 1.02 s HEC rate: 50.11 Hz *** 
         DSSSD # 4 count: 341 old count: 288 dt: 1.02 s HEC rate: 52.08 Hz *** 
         DSSSD # 5 count: 53 old count: 46 dt: 1.02 s HEC rate: 6.88 Hz *** 
         DSSSD # 6 count: 35 old count: 31 dt: 1.02 s HEC rate: 3.93 Hz 
         all SortSas spectra and histograms zero'd 


19.01     BigRIPS and BRIKEN stop daqs 
          AIDA on file R6_201 

19.02    BigRIPS starts run 3026 
         BRIKEN starts run 26 
         AIDA on file R6_201 

20:00    Detector biases & leakage currents OK - see attachments 20 & 21 
         FEE64 Temperatures OK - see attachment 22 
         merger data rate -- - see attachment 23 
         good events statistics OK - high but relatively stable - see attachment 24, 26 
         implantation profiles - see attachment 25 
         *all* system wide checks OK 

20:02    BigRIPS and BRIKEN stop daqs 
         AIDA on file R6_219 

20:02    BigRIPS starts run 3027 
         BRIKEN starts run 27 
         AIDA on file R6_220 

21:02    BigRIPS and BRIKEN stop daqs 
         AIDA on file R6_237 

20:03    BigRIPS starts run 3028 
         BRIKEN starts run 28 
         AIDA on file R6_237 

21.21    beam lost during R6_243 
         BigRIPS and BRIKEN stop daqs
         AIDA on file R6_243 

21:24   beam back 

21:25   BigRIPS starts run 3029 
        BRIKEN starts run 29 
        AIDA on file R6_244 

22:26   BigRIPS and BRIKEN stop daqs 
        AIDA on file R6_262 
22:28   BigRIPS starts run 3030
        BRIKEN starts run 30 
        AIDA on file R6_263 

22:36   Detector biases & leakage currents OK 
        FEE64 Temperatures OK 
        merger data rate good events statistics OK - high but relatively stable implantation profiles 
        for the details see attachments 27-32 

23:05 beam lost 
23:08 beam back

23:28     BigRIPS and BRIKEN stop daqs
          AIDA on file R6_281

23:29   BigRIPS starts run 3031 
        BRIKEN starts run 31 
        AIDA on file R6_281

Preamplifier waveforms sampled by 50MSPS, 14 bit ADC


attachment 1 - nnaida13 ASIC settings (+ input)
attachment 2 - nnaida16 ASIC settings (- input)

beam on
-------

attachments 3-5 - three successive waveform updates nnaida13 asic #1 - 1000ch = 20us
attachments 6-8 - three successive waveform updates nnaida13 asic #1 - 1000ch = 2ms


attachments 9-11 - three successive waveform updates nnaida16 asic #1 - 1000ch = 20us
attachments 12-14 - three successive waveform updates nnaida16 asic #1 - 1000ch = 2ms

beam off
--------

attachments 15-18 - three successive waveform updates nnaida13 asic #1 - 1000ch = 2ms
attachments 19-21 - three successive waveform updates nnaida16 asic #1 - 1000ch = 2ms


attachments 22-23 - three successive waveform updates nnaida16 asic #1 - 1000ch = 2ms, y-scale expanded
attachments 24-25 - three successive waveform updates nnaida13 asic #1 - 1000ch = 2ms, y-scale expanded

08.57 Stop DAQ
      AIDA file RIBF128/R6_24

09.00 BigRips starts run 3016
      BRIKEN starts run 16
      AIDA on file R6_25

09:23 biases and leakage currents recorded attachments 1 and 2

09.36 online spectra per DSSSD x versus y (HEC) - see attachment 3
      per DSSSD E_p versus E_n (HEC) - see attachment 4 

09.39 offline analysis RIBF128/R6_36

      ADC & disc data synchronised - see attachment 5

      rates

 *** DSSSD # 1 count:    475974 old count:    407247 dt:      1.04 s  LEC rate:  66335.14 Hz
 *** DSSSD # 2 count:    695537 old count:    595776 dt:      1.04 s  LEC rate:  96289.08 Hz
 *** DSSSD # 3 count:    284002 old count:    245156 dt:      1.04 s  LEC rate:  37494.07 Hz
 *** DSSSD # 4 count:    197428 old count:    169943 dt:      1.04 s  LEC rate:  26528.46 Hz
 *** DSSSD # 5 count:     58436 old count:     49831 dt:      1.04 s  LEC rate:   8305.53 Hz
 *** DSSSD # 6 count:    130742 old count:    111691 dt:      1.04 s  LEC rate:  18387.98 Hz
 *** DSSSD # 1 count:         2 old count:         2 dt:      1.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        92 old count:        82 dt:      1.04 s  HEC rate:      9.65 Hz
 *** DSSSD # 3 count:       387 old count:       332 dt:      1.04 s  HEC rate:     53.09 Hz
 *** DSSSD # 4 count:       281 old count:       251 dt:      1.04 s  HEC rate:     28.96 Hz
 *** DSSSD # 5 count:        37 old count:        31 dt:      1.04 s  HEC rate:      5.79 Hz
 *** DSSSD # 6 count:        36 old count:        33 dt:      1.04 s  HEC rate:      2.90 Hz

     all SortSas spectra and online histograms zero'd

09.48 analysis RIBF128/R6_35 deadtime <0.5%, zero ts timewarps, 2 MBS timewarps - see attachment 6

10.00 FEE64 temperatures OK - see attachment 7
      good events stats - see attachment 8
      merger - no error/warning messages - see attachment 9

      nnaida13 waveforms ASICS 1-4 100*20us = 2ms range - see attachments 10-13

10.00 Stop DAQ
      AIDA file RIBF128/R6_42

10.01 BigRips starts run 3017
      BRIKEN starts run 17
      AIDA on file R6_43

10.09 *all* system wide checks OK 

11:00 stop daq
      aida file r6_59

11.01 BigRips starts run 3018
      BRIKEN starts run 18
      AIDA on file R6_60

11:59 stop daq

      aida file R6_76

12:01 Bigrips starts run 3019
      BRIKEN starts run 19
      aida on file R6_77

12:59 stop daq
      aida file R6_94

13:01 Bigrips starts run 3020
      BRIKEN starts run 20
      aida on file R6_95

13.51 biases and leakage currents recorded attachments 15 & 16

14:00 stop daq
      aida file R6_112

14:03 Bigrips starts run 3021
      BRIKEN starts run 21
      aida on file R6_113

14:57 beam stopped

15:00 stop daq
      aida file R6_130
15:01 beam back

15:02 Bigrips starts run 3022
      BRIKEN starts run 22
      aida on file R6_130

00:03 BigRIPS starts run 3007
      BRIKEN starts run 007
      AIDA on file R5_146

00:07 Bias and leakage currents ok - attachment 1
      System wide checks all ok
      FEE temperatures ok - attachment 2
      Good evts still seeing noise on 13 and 14 - attachment 3
      No merger errors since GO

00:48 DSSD Rates from R5_160
 *** DSSSD # 1 count:    250904 old count:    163089 dt:      1.02 s  LEC rate:  86326.91 Hz
 *** DSSSD # 2 count:    335185 old count:    222784 dt:      1.02 s  LEC rate: 110496.28 Hz
 *** DSSSD # 3 count:    157445 old count:    103991 dt:      1.02 s  LEC rate:  52548.18 Hz
 *** DSSSD # 4 count:    102079 old count:     67878 dt:      1.02 s  LEC rate:  33621.44 Hz
 *** DSSSD # 5 count:     40500 old count:     26651 dt:      1.02 s  LEC rate:  13614.32 Hz
 *** DSSSD # 6 count:     64652 old count:     42396 dt:      1.02 s  LEC rate:  21878.85 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:      1.02 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        41 old count:        27 dt:      1.02 s  HEC rate:     13.76 Hz
 *** DSSSD # 3 count:       161 old count:       103 dt:      1.02 s  HEC rate:     57.02 Hz
 *** DSSSD # 4 count:       131 old count:        85 dt:      1.02 s  HEC rate:     45.22 Hz
 *** DSSSD # 5 count:        22 old count:        12 dt:      1.02 s  HEC rate:      9.83 Hz
 *** DSSSD # 6 count:         9 old count:         6 dt:      1.02 s  HEC rate:      2.95 Hz

01:02 Briken and BigRIPS daq stops

01:03 Briken Starts run 8
      BigRIPS starts run 3008

01:40 Phong noticed a significant difference in the noise in the (raw) low energy spectra a few of the FEEs when
      comparing the runs right before and right after the power-cycle  (See Attachment 12) required to recover 
      the DAQ crash last afternoon (June 5th). 
      NNAIDA 22, 21, 14, and 13 had a much higher count rate after the power cycle, and what seems like a lower
      threshold. We can't observe the pulser peak in any of those.
      NNAIDA 13 has the highest count rate, and the waveforms show what looks like noise with a regular
      frequency (attachments 4 - 7)

      For reference, we include the waveform of other positive FEEs 8-11

02:51 Bias and leakages ok - attachment 13
      System wide checks ok
      Good Event statistics - attachment 14
      Fee Temperatures - attachment 15

03:03 BigRIPS and BRIKEN stop daqs
      AIDA on file R5_208

03:04 BigRIPS starts run 3009
      BRIKEN starts run 9
      AIDA on file R5_208

04:03 BigRIPS and BRIKEN stop daqs
      AIDA on file R5_230

04:04 BigRIPS starts run 3010
      BRIKEN starts run 10
      AIDA on file R5_230

04:09 System wide checks all ok
      Bias and leakages ok - attachment 16
      Fee Temperatures - attachment 17
      Good Event Statistics - attachment 18

04:48 DSSD rates from R5_244
 *** DSSSD # 1 count:   1239207 old count:   1155424 dt:      1.04 s  LEC rate:  80379.42 Hz
 *** DSSSD # 2 count:   1684042 old count:   1567549 dt:      1.04 s  LEC rate: 111760.61 Hz
 *** DSSSD # 3 count:    806937 old count:    752064 dt:      1.04 s  LEC rate:  52643.85 Hz
 *** DSSSD # 4 count:    505814 old count:    472642 dt:      1.04 s  LEC rate:  31824.43 Hz
 *** DSSSD # 5 count:    208086 old count:    193231 dt:      1.04 s  LEC rate:  14251.53 Hz
 *** DSSSD # 6 count:    335686 old count:    313190 dt:      1.04 s  LEC rate:  21582.13 Hz
 *** DSSSD # 1 count:         8 old count:         7 dt:      1.04 s  HEC rate:      0.96 Hz
 *** DSSSD # 2 count:       193 old count:       181 dt:      1.04 s  HEC rate:     11.51 Hz
 *** DSSSD # 3 count:       872 old count:       810 dt:      1.04 s  HEC rate:     59.48 Hz
 *** DSSSD # 4 count:       637 old count:       601 dt:      1.04 s  HEC rate:     34.54 Hz
 *** DSSSD # 5 count:        89 old count:        81 dt:      1.04 s  HEC rate:      7.68 Hz
 *** DSSSD # 6 count:        71 old count:        65 dt:      1.04 s  HEC rate:      5.76 Hz

05:01 BRIKEN and BigRIPS stop DAQs
      AIDA on file R5_250

05:02 BigRips starts run 3011
      BRIKEN starts run 11
      AIDA on file R5_250

06:02 BigRIPS and BRIKEN stop their daqs
      AIDA on file R5_272

06:03 BigRIPS starts run 3012
      BRIKEN starts run 12
      AIDA on file R5_272

06:06 System wide checks all ok
      Bias and leakage currents ok - attachment 19
      Good event statistics - attachment 20
      FEE temperatures ok - attachment 21

06:16 Analysis of R5_270 - attachment 22
      Three MBS errors

06:34 130Cd decay curve - attachments 22 and 23
      Despite the large amounts of noise in the detectors it is still possible to observe decay curves. They are
cleaned up a lot
      by applying a multiplicity cut (attachment 22 with attachment 23 without. Further cuts and vetos could be
applied to clean up further.
      The fit in attachment 22 gives a half life of 182ms which is not quite the expected 162ms but a reasonable
first fit.

07.14 Layout - 1.8.W waveforms - see attachments 24-27
      No significant change in intrinsic/extrinsic noise cf. previous screenshots
      nnaida13 ASIC 1-4 waveforms - see attachments 28-31 - range 100*20us

07.24 BRIKEN and BigRIPS stop DAQs
      AIDA on file R5_300

07.25 Stop AIDA DAQ
      Cycle detector biases
      Start AIDA DAQ

07.38 BigRips starts run 3014
      BRIKEN starts run 14
      AIDA on file R6_1

07.45 nnaida13 ASIC 1-4 waveforms - see attachments 32-35 - range 100*20us

08.07 all system wide checks OK

16:43  Leakage currents OK - see attachment 1
       FEE64 temperatures OK - see attachment 2
       Statistics show rate increase in nnaida13, 21. Reason unclear - see attachment 3
       Waveforms for nnaida13 look OK - see attachment 4
       No merger errors - see attachment 5

       All system-wide checks OK, except ADC calibration for nnaida1, 8, 19

       Current writing speed 10 Mb/s, 30% higher than before - see attachment 6

       Current AIDA run /TapeData/RIBF128/R5_6

17:50  Leakage currents OK - see attachment 7
       FEE64 temperatures OK - see attachment 8
       Statistics as before - see attachment 9
       No merger errors - see attachment 10

       Analysed /TapeData/RIBF128/R5_25 - attachment 11
       Rate high as expected, no timewarps, negligible dead time, idle time in agreement with dead time


19.34 DAQ starts
      AIDA file RIBF128/R5_58
      BigRIPS file 2088
      BRIKEN file 0

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      130Ag BigRIPS setting, degrader setting - fixed 6mm (in F11) + variable all out = 6 mm Al

19.38 DAQ stops
      AIDA file RIBF128/R5_59

20.04 Detector biases & leakage currents OK - see attachments 12 & 13
      FEE64 Temperatures OK - see attachment 14
      good events statistics OK - see attachment 15
      No warnings/errors reported by merger since DAQ GO - see attachment 16

      *all* system wide checks OK (zero fails)

      analysis of file RIBF128/R5_67 - dead time < 0.5%, no timewarps, 2 MBS timewarps - see attachment 17

20.14 online analysis - ADC & disc data synchronised - see attachment 18

20.28 layout spectra - attachments 19-28
      no pulser peaks observed in p+n junction strip FEE64s - to be checked when access is obtained

21.01 E17/F11 ambient temperature +24.3 deg C, RH 41.0%, d.p. +10.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

21.07 DAQ starts
      AIDA file RIBF128/R5_85
      BigRIPS file 3003
      BRIKEN file 3

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      130Ag BigRIPS setting, degrader setting - fixed 2mm Al at F7, fixed 3mm + variable 1mm Al at F11 = 6 mm Al

21.15 DAQ stop
      AIDA file RIBF128/R5_88

21.31 DAQ starts
      AIDA file RIBF128/R5_93
      BigRIPS file 3004
      BRIKEN file 4

      DAQ sync check OK

      All SortSas spectra & histograms zero'd

21.45 DAQ stop
      AIDA file RIBF128/R5_98

21.31 DAQ starts
      AIDA file RIBF128/R5_98
      BigRIPS file 3005
      BRIKEN file 5

22.00 Detector biases & leakage currents OK - see attachments 29 & 30
      FEE64 Temperatures OK - see attachment 31
      good events statistics OK - see attachment 32
      No warnings/errors reported by merger since DAQ GO - see attachment 33

      *all* system wide checks OK (zero fails)

      analysis of file RIBF128/R5_67 - dead time < 0.7%, no timewarps, 1 MBS timewarp - see attachment 34

20.14 online analysis - ADC & disc data synchronised - see attachment 35

22.08 offline analysis file RIBF128/R5_106 - rates

 *** DSSSD # 1 count:    403476 old count:    321247 dt:      1.03 s  LEC rate:  80056.89 Hz
 *** DSSSD # 2 count:    559009 old count:    446189 dt:      1.03 s  LEC rate: 109839.82 Hz
 *** DSSSD # 3 count:    262328 old count:    206447 dt:      1.03 s  LEC rate:  54404.88 Hz
 *** DSSSD # 4 count:    159863 old count:    127957 dt:      1.03 s  LEC rate:  31063.19 Hz
 *** DSSSD # 5 count:     66930 old count:     52878 dt:      1.03 s  LEC rate:  13680.81 Hz
 *** DSSSD # 6 count:    109482 old count:     87597 dt:      1.03 s  LEC rate:  21306.90 Hz
 *** DSSSD # 1 count:         1 old count:         1 dt:      1.03 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        72 old count:        56 dt:      1.03 s  HEC rate:     15.58 Hz
 *** DSSSD # 3 count:       278 old count:       214 dt:      1.03 s  HEC rate:     62.31 Hz
 *** DSSSD # 4 count:       218 old count:       178 dt:      1.03 s  HEC rate:     38.94 Hz
 *** DSSSD # 5 count:        22 old count:        18 dt:      1.03 s  HEC rate:      3.89 Hz
 *** DSSSD # 6 count:        27 old count:        15 dt:      1.03 s  HEC rate:     11.68 Hz

     online analysis - per DSSSD x versus y (HEC) - attachment 36
                       per DSSSD E_p versus E_n (HEC) - attachment 37

     offline analysis file RIBF128/R5_106 - ADC & disc data synchronised - attachment 38
     N.B. pulser to p+n strips appears to be low amplitude - absence of secondary ADC peak, low multiplicity for
disc data


23.01 DAQ stop
      AIDA file RIBF128/R5_124

23.02 DAQ starts
      AIDA file RIBF128/R5_124
      BigRIPS file 3006
      BRIKEN file 6

00:01 DAQ stop
      AIDA file R5_145

07:50  Leakage currents OK - attachment 1
       FEE64 temperatures OK - attachment 2
       Good event statistics OK - attachment 3
       No new merger errors - attachment 4
       HEC x vs y plot OK - attachment 5
       Zero'd SortSas
       Sorted run RIBF148/R2_375. DSSD rates as follows
       Pulser still synchronised - attachment 6

 *** data items:   13911095 ( 120732.29 Hz)
 *** ADC events:    1173612 (  10185.60 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:    546264 old count:    529893 dt:     11.53 s  LEC rate:  47387.36 Hz
 *** DSSSD # 2 count:    811805 old count:    787055 dt:     11.53 s  LEC rate:  70422.54 Hz
 *** DSSSD # 3 count:    308448 old count:    297268 dt:     11.53 s  LEC rate:  26757.28 Hz
 *** DSSSD # 4 count:    246100 old count:    238286 dt:     11.53 s  LEC rate:  21348.71 Hz
 *** DSSSD # 5 count:    148961 old count:    143967 dt:     11.53 s  LEC rate:  12922.08 Hz
 *** DSSSD # 6 count:    240995 old count:    233066 dt:     11.53 s  LEC rate:  20905.86 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:     11.53 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        19 old count:        18 dt:     11.53 s  HEC rate:      1.65 Hz
 *** DSSSD # 3 count:         5 old count:         5 dt:     11.53 s  HEC rate:      0.43 Hz
 *** DSSSD # 4 count:        32 old count:        26 dt:     11.53 s  HEC rate:      2.78 Hz
 *** DSSSD # 5 count:        70 old count:        70 dt:     11.53 s  HEC rate:      6.07 Hz
 *** DSSSD # 6 count:      1403 old count:      1354 dt:     11.53 s  HEC rate:    121.71 Hz

       Analysed run R2_375. 6 MBS related errors messages, but no MBS timewarps. See attachment 7

08:01  BRIKEN and BigRIPS stopping run
       AIDA on run RIBF148/R2_378

08:03  BRIKEN starts run 25
       BigRIPS starts run 24
       AIDA on run RIBF148/R2_379

08:26 All system wide checks OK *except* nnaida1 clock status (6), ADC calibration for nnaida1, 21

08:26  BRIKEN and BigRIPS stopping run
       AIDA on run RIBF148/R2_387

08:26 Completely removing degraders

08:39  BRIKEN starts run 26
       BigRIPS starts run 25
       AIDA on run RIBF148/R2_388
    
       Zero'd SortSas

08:55  HEC x vs y plot - attachment 8

09:00  BRIKEN and BigRIPS stopping run
       AIDA on run RIBF148/R2_394
       Rare earths first run ends here.

09:01  Stopped DAQ

09:20  Rebuilt lead wall in front of AIDA
       T = 24.9C RH = 23.7% DP = 3.6C
       Julabo Chiller at 75%. Refilled.

11:13  Restarted DAQ
       Checkload x2 - All OK
       Current run /TapeServer/RIBF128/R1_1
       All OK

11:19 Starting run RIBF128/R2_1
      High-amplitude pulser walkthrough 90 000, 80 000 ... 10 000
      Frequency 250 Hz

11:31 Starting run RIBF128/R3_1
      Low-amplitude pulser walkthrough 12 000, 10 000 ... 2 000
      Frequency 250 Hz
      Set pulser amplitude back to 90 000, frequency to 25 Hz
      Stopped run

11:41 Starting new run RIBF128/R4_1
      Background run at present

13.56 Detector biases & leakage currents OK - see attachments 9 & 10
      FEE64 Temperatures OK - see attachment 11
      good events statistics OK - see attachment 12
      No warnings/errors reported by merger since DAQ GO - see attachment 13

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

14.30 analysis of file RIBF128/R4_25 - dead time < 0.5% - see attachment 14

14.32 online analysis - ADC data synchronised - see attachment 15

15:08 Merger log shows repeated timewarps - attachment 16
      Seems to have stopped now.

15:10 Analysed R4_38. 9 MBS timewarps.
      Other parameters as normal

15:14 Analysed R4_39. 4 MBS timewarps.
      Other parameters as normal.

15:19 ttyUSB18 (nnaida6) attached - attachment 17
      Log is extremely large and contains several repetitions of one error message

TCP transfer library version 3.12
TCP socket send buffer was 16384 - now 221184
TCP socket receive buffer was 87380 - now 221184
TCP socket created OK - now connecting to myserver port 11006
Transfer Error - : Connection refused
connect() failed:  
TCP transfer library version 3.12
TCP socket send buffer was 16384 - now 221184
TCP socket receive buffer was 87380 - now 221184
TCP socket created OK - now connecting to myserver port 11006
Transfer Error - : Connection refused
connect() failed:  
TCP transfer library version 3.12
TCP socket send buffer was 16384 - now 221184
TCP socket receive buffer was 87380 - now 221184
TCP socket created OK - now connecting to myserver port 11006
Transfer Error - : Connection refused
       

15:25 Merger crashed. Stopped merger. Stopped tape server.
      Merger shows all links bright green, except nnaida 2 - see attachment 20
      Statistics show a counting spike in nnaida 2 - see attachment 21

15:33 Cannot reset the DAQ - see attachment 22

15:40 System console log for nnaida2 attached - see attach 23

15:54 Power cycled FEEs
      Waited 10 minutes. nnaida13 did not mount /nfs - see attached log (attach 24)

16:07 Power cycled FEEs again. Managed to restart the DAQ.

23:59   BigRIPS and Briken stop their DAQ
        AIDA run file R2_245

00:01   BRIKEN starts run 17
        BigRIPS starts run 2016
        AIDA on file R2_246

00:25   Analysis of file RIBF148/R2_250 - zero timewarps, four MBS timewarps - see attachment 1

00:37   per DSSSD rates file RIBF148/R2_250

*** DSSSD # 1 count:    768684 old count:    723417 dt:      1.03 s  LEC rate:  43913.93 Hz
 *** DSSSD # 2 count:   1122273 old count:   1056622 dt:      1.03 s  LEC rate:  63688.64 Hz
 *** DSSSD # 3 count:    427162 old count:    402923 dt:      1.03 s  LEC rate:  23514.48 Hz
 *** DSSSD # 4 count:    338200 old count:    317183 dt:      1.03 s  LEC rate:  20388.79 Hz
 *** DSSSD # 5 count:    204859 old count:    191893 dt:      1.03 s  LEC rate:  12578.44 Hz
 *** DSSSD # 6 count:    327506 old count:    307098 dt:      1.03 s  LEC rate:  19797.99 Hz
 *** DSSSD # 1 count:         3 old count:         3 dt:      1.03 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        46 old count:        43 dt:      1.03 s  HEC rate:      2.91 Hz
 *** DSSSD # 3 count:         7 old count:         6 dt:      1.03 s  HEC rate:      0.97 Hz
 *** DSSSD # 4 count:        32 old count:        30 dt:      1.03 s  HEC rate:      1.94 Hz
 *** DSSSD # 5 count:        77 old count:        72 dt:      1.03 s  HEC rate:      4.85 Hz
 *** DSSSD # 6 count:      1873 old count:      1748 dt:      1.03 s  HEC rate:    121.26 Hz

01:00   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_262

01:02   BRIKEN starts run 18
        BigRIPS starts run 2017
        AIDA on file R2_263

01:43   Beam is OFF

01:45   Beam is ON

02:00   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_278

02:04   BRIKEN starts run 19
        BigRIPS starts run 2018
        AIDA on file R2_280

02:28   *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
        FEE64 Temperatures OK - see attachment 2
        Good events statistics OK - see attachment 3 
        Detector biases & leakage currents OK - see attachment 4
        Merger and tape server still running - see attachment 5, 6

02:35   High energy correlation between x and y attachment 7
        AIDA run R2_288

03:02   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_295

03:02   BRIKEN starts run 20
        BigRIPS starts run 2019
        AIDA on file R2_296

03:52    Analysis of file RIBF148/R2_305 - zero timewarps, two MBS timewarps - see attachment 8

03:59   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_311

04:02   BRIKEN starts run 21
        BigRIPS starts run 2020
        AIDA on file R2_312

04:59   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_328

05:02   BRIKEN starts run 22
        BigRIPS starts run 2021
        AIDA on file R2_329

05:11   *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
        FEE64 Temperatures OK - see attachment 9
        Good events statistics OK - see attachment 10 
        Detector biases & leakage currents OK - see attachment 11
        Merger and tape server still running,No warnings/errors- see attachment 12, 13, 14

05:23   Analysis of file RIBF148/R2_332 - zero timewarps - see attachment 15

05:58   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_344

05:59   BRIKEN starts run 23
        BigRIPS starts run 2022
        AIDA on file R2_345

07:00   BigRIPS and BRIKEN stop their DAQ
        AIDA run file R2_361

07:05   BRIKEN starts run 24
        BigRIPS starts run 2023
        AIDA on file R2_362

07:06   Detector biases & leakage currents OK - see attachment 16

07:12   All system wide checks OK except ADC calibration of nnaida1, 21 and nnaida clock status (status = 6)
        FEE64 temperature OK - see attachment 17
        Good event statistics OK - see attachment 18
        Merger and tape server running, No warning/errors 

07:17   Analysis of file RIBF148/R2_364 - zero timewarps, three MBS timewarps - see attachment 19
        

16.25  *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
       FEE64 Temperatures OK - see attachment 1
       Good events statistics OK - see attachment 2 
       Detector biases & leakage currents OK - see attachment 3
       No warnings/errors reported by merger since DAQ GO - see attachment 4

16.30  Analysis file RIBF148/R2_122 - nnaida2 deadtime 0.9%, all other deadtimes <0.3%, zero timewarps, one MBS
timewarp - see attachment 5

16.44  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_127

16.47  BRIKEN starts run 9
       BigRIPS starts run 2008
       AIDA on file R2_128

17.08  Online analysis - per DSSSD HEC x versus y attachment 6
                         per DSSSD HEC E_p versus E_n - see attachment 7

17.44  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_143

17.46  BRIKEN starts run 10
       BigRIPS starts run 2009
       AIDA on file R2_144

18.00  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_147

18.02  BRIKEN starts run 11
       BigRIPS starts run 2010
       AIDA on file R2_148

18.15  *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
       FEE64 Temperatures OK - see attachment 8
       Good events statistics OK - see attachment 9
       Detector biases & leakage currents OK - see attachment 10
       No warnings/errors reported by merger since DAQ GO - see attachment 11

18.47  Online analysis - per DSSSD HEC x versus y attachment 12
                         per DSSSD HEC E_p versus E_n - see attachment 13
       Zero online sort spectra

18.50  Analysis of file RIBF148/R2_159 - all deadtimes <0.5%, zero timewarps, four MBS timewarps - see attachment 14

19.04  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_165

19.07  BRIKEN starts run 12
       BigRIPS starts run 2011
       AIDA on file R2_166

20:00  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_180

20.02  BRIKEN starts run 13
       BigRIPS starts run 2012
       AIDA on file R2_180
       Zero online sort spectra so we can monitor the influence on HEC x versus y due to the degrader just inserted.

20.15  *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
       FEE64 Temperatures OK - see attachment 15
       Good events statistics OK - see attachment 16
       Detector biases & leakage currents OK - see attachment 17
       No warnings/errors reported by merger since DAQ GO - see attachment 18

20.28  Analysis of file RIBF148/R2_185 - all deadtimes <0.4%, zero timewarps, three MBS timewarps - see attachment 19

20.58  Online analysis - per DSSSD HEC x versus y attachment 20
                         per DSSSD HEC E_p versus E_n - see attachment 21
       Zero online sort spectra
     
21.02  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_197

21.03  BRIKEN starts run 14
       BigRIPS starts run 2013
       AIDA on file R2_197

22.02  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_213

22.03  BRIKEN starts run 15
       BigRIPS starts run 2014
       AIDA on file R2_214

22.17  *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
       FEE64 Temperatures OK - see attachment 22
       Good events statistics OK - see attachment 23
       Detector biases & leakage currents OK - see attachment 24
       No warnings/errors reported by merger since DAQ GO - see attachment 25

22.22  Analysis of file RIBF148/R2_218 - all deadtimes <0.5%, zero timewarps, four MBS timewarps - see attachment 26

22.45  Online analysis - per DSSSD HEC x versus y attachment 27
                         per DSSSD HEC E_p versus E_n - see attachment 28
       Zero online sort spectra

23.04  BRIKEN and BigRIPS stop daqs
       AIDA on file R2_230

23.05  BRIKEN starts run 16
       BigRIPS starts run 2015
       AIDA on file R2_231

08:00 DAQ found stopped at around 04:49 - Attachment 1
      Time obtained from last file written as part of R1
      Tape server still running - Attachment 2
      Merger terminal contents - Attachment 3
      FEE output from monitor for nnaida6 - Attachment 4

      DAQ still passed all system wide checks after the crash

08:22 Merger recovered.
      DAQ start
      AIDA file RIBF148/R2

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

08.35 Detector biases & leakage currents OK - see attachments 5 & 6
      FEE64 Temperatures OK - see attachment 7
      good events statistics OK - see attachment 8
      No warnings/errors reported by merger since DAQ GO - see attachment 9

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
      ADC calibration reports for nnaida1 & nnaida21 - see attachments 10 & 11

08.50 E17/F11 ambient temperature +24.1 deg C, RH 25.1%, d.p. +2.9 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

09.05 analysis of file RIBF148/R2_7 - deadtime <0.5%, no timewarps - see attachment 12

09.12 offline analysis RIBF148/R2_10 - ADC & disc data synchronised - see attachment 13

09.40 System stats showing aidas1 was 100% busy from c. 04.50 - see attachment 14

11.55 RIBF148 DAQ starts
      BigRIPS setting 167Sm

      AIDA file RIBF148/R2_48
      BigRIPS file 2002
      BRIKEN file 3

      Degrader setting  F11 3mm Al variable

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

12.04 Detector biases & leakage currents OK - see attachments 15 & 16

12.29 DAQ stop
      AIDA file RIBF148/R2_57

      per DSSSD HEC x versus y - see attachment 17

12.32 RIBF148 DAQ starts

      AIDA file RIBF148/R2_57
      BigRIPS file 2003
      BRIKEN file 4

13:00 Bias and leakage currents - attachment 18

13:29 BRIKEN and BigRIPS stop daqs
      AIDA on file R2_73

13:31 BRIKEN stars run 5
      BigRIPS starts run 2004
      AIDA on file R2_274

      No beam at start of run

14.00 Detector biases & leakage currents OK but rate of increase significantly increased due to higher A & Z -
see attachments 19 & 20

14.10 DAQ stop
      AIDA file RIBF148/R2_84

     per DSSSD HEC x versus y - see attachment 21

     All SortSas spectra zero'd


14.12 RIBF148 DAQ starts

      Degrader setting  F11 1mm Al variable

      AIDA file RIBF148/R2_85
      BigRIPS file 2005
      BRIKEN file 6

      F11 rate ~200Hz

14.32 analysis file RIBF148/R2_89 - nnaida2 deadtime 0.6%, all other deatimes <0.5%, zero timewarps, three MBS
timewarps - see attachment 22

      offline analysis RIBF148/R2_91

 *** DSSSD # 1 count:    219696 old count:    166600 dt:      1.01 s  LEC rate:  52719.37 Hz
 *** DSSSD # 2 count:    346281 old count:    260940 dt:      1.01 s  LEC rate:  84735.65 Hz
 *** DSSSD # 3 count:    127888 old count:     95704 dt:      1.01 s  LEC rate:  31955.71 Hz
 *** DSSSD # 4 count:     89409 old count:     67186 dt:      1.01 s  LEC rate:  22065.37 Hz
 *** DSSSD # 5 count:     53702 old count:     40701 dt:      1.01 s  LEC rate:  12908.78 Hz
 *** DSSSD # 6 count:     83402 old count:     62481 dt:      1.01 s  LEC rate:  20772.60 Hz
 *** DSSSD # 1 count:         1 old count:         0 dt:      1.01 s  HEC rate:      0.99 Hz
 *** DSSSD # 2 count:        11 old count:         9 dt:      1.01 s  HEC rate:      1.99 Hz
 *** DSSSD # 3 count:         2 old count:         2 dt:      1.01 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         8 old count:         6 dt:      1.01 s  HEC rate:      1.99 Hz
 *** DSSSD # 5 count:        22 old count:        13 dt:      1.01 s  HEC rate:      8.94 Hz
 *** DSSSD # 6 count:       447 old count:       333 dt:      1.01 s  HEC rate:    113.19 Hz

     ADC & disc data synchronised - see attachment 24

     online analysis - per DSSSD HEC x versus y - see attachment 23

14.43 all SortSas spectra zero'd

15.08 Detector biases & leakage currents OK - see attachments 25 & 26
      FEE64 Temperatures OK - see attachment 27
      good events statistics OK - see attachment 28
      No warnings/errors reported by merger since DAQ GO - see attachment 29

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

15.11 DAQ stop
      AIDA file RIBF148/R2_101


15.13 RIBF148 DAQ starts

      Degrader setting  F11 1mm Al variable

      AIDA file RIBF148/R2_102
      BigRIPS file 2006
      BRIKEN file 7

15.37 DAQ stop
      AIDA file RIBF148/R2_109

      online analysis - per DSSSD HEC x versus y
                        per DSSSD HEC E_p versus E_n - see attachments 30 & 31
                        heavy-ions stopped:transmitted ~50:50

15.42 RIBF148 DAQ starts

      Degrader setting F11 *all out*

      AIDA file RIBF148/R2_110
      BigRIPS file 2007
      BRIKEN file 8

      *all* SortSas spectra and online histograms zero'd

16:26 DAQ continues OK
      all system wide checks ok, *except* nnaida1 clock status (6), nnaida1, 21 ADC calibration
      Leakage currents OK - attachment 1
      FEE64 temperatures OK - attachment 2
      Good event statistics OK - attachment 3
      No new merger errors - attachment 4
      Sorted run R1_1540. DSSSD rates as follows
       *** data items:    8958582 ( 115623.74 Hz)
 *** ADC events:     954672 (  12321.45 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:    392147 old count:    361510 dt:      8.78 s  LEC rate:  44646.94 Hz
 *** DSSSD # 2 count:    557051 old count:    514085 dt:      8.78 s  LEC rate:  63421.69 Hz
 *** DSSSD # 3 count:    185346 old count:    172449 dt:      8.78 s  LEC rate:  21102.12 Hz
 *** DSSSD # 4 count:    154380 old count:    142180 dt:      8.78 s  LEC rate:  17576.56 Hz
 *** DSSSD # 5 count:     67195 old count:     62386 dt:      8.78 s  LEC rate:   7650.32 Hz
 *** DSSSD # 6 count:    131951 old count:    122163 dt:      8.78 s  LEC rate:  15022.96 Hz
 *** DSSSD # 1 count:       185 old count:       171 dt:      8.78 s  HEC rate:     21.06 Hz
 *** DSSSD # 2 count:       450 old count:       410 dt:      8.78 s  HEC rate:     51.23 Hz
 *** DSSSD # 3 count:       379 old count:       351 dt:      8.78 s  HEC rate:     43.15 Hz
 *** DSSSD # 4 count:       297 old count:       269 dt:      8.78 s  HEC rate:     33.81 Hz
 *** DSSSD # 5 count:       132 old count:       127 dt:      8.78 s  HEC rate:     15.03 Hz
 *** DSSSD # 6 count:        20 old count:        19 dt:      8.78 s  HEC rate:      2.28 Hz
 
     Pulser event still synchronised - see attachment 5

16:34  BigRIPS & BRIKEN stop runs
       AIDA on file R1_1542

16:35  BigRIPS starts run 1120
       BRIKEN starts run 109
       AIDA on file R1_1543
       Zero'd all SortSas

17:33 bigRIPS and BRIKEN stop daqs
      AIDA on file R1_1556

17:34 bigRIPS starts run 1121
      BRIKEN starts run 110
      AIDA on file R1_1556

17:54 System wide checks all ok

19:50 bigRIPS starts run 1123
      BRIKEN starts run 112
      AIDA on file R1_1588

21:00 End of 78Ni run
      last AIDA file R1_1606
      Stopped AIDA DAQ
      Refilled chiller

21:18 Performing pulser walkthrough. 
      Mistakenly started Tape server before starting DAQ. There will be no R2 run.
      Starting R3 - pulser walkthrough.
      
      Pulser frequency 250 Hz
      Pulser amplitudes 90 000, 80 000, 70 000 ... 10 000

      Can't see pulser peak in spectra. Issue unclear

21:40 Restarted high-amplitude pulser walkthrough run. Run RIBF127R1/R4_0
      Pulser frequency 250 Hz
      Pulser amplitudes 90 000, 80 000, 70 000 ... 10 000

      Pulser peak now visible in histograms

      Started low-amplitude pulser walkthrough run. Run RIBF127R1/R5_0
      Pulser frequency 250 Hz
      Pulser amplitudes 12 000, 10 000, ... 2 000

      Set pulser amplitude back to 90 000, frequency to 25 Hz

23:17 Merger and Tape Server stopped
      Links to FEEs disabled
      All Browser tabs closed
      Terminal sessions closed

23:25 Started R1 in /TapeData/RIBF128/

23:43 Start ASIC data readout
      System wide checks ok
      ASIC load check ok

The analysis of files RIBF127R1/R1_1478 to R1_1486 is appended. This sequence of files should
encompass a correlation reset request (from BRIKEN to AIDA)

There appear to be a number of anomalies

1) MBS correlation scalers observed with one missing 16-bit data value (bits 16-31 or bits 0-15)
   across approximately five files (~20 minutes)

2) The first (presumably) MBS correlation scaler following reset corresponds to a time ~300s (25MHz clock)   

08.29 BRIKEN 100; BigRIPS 1111 stopping run.
      AIDA on run R1_1429

08.30 BigRIPS starts run 1112
      BRIKEN starts run 101
      AIDA on run R1_1430

09.08 System wide checks OK
      FEE64 temperatures OK - attachment 1
      Good events statistics OK - attachment 2
      Leakage currents OK - attachment 3    
      No new merger errors - attachment 4
      HEC x vs y plot OK - attachment 6
      Zero SortSas

09.30 BRIKEN 101; BigRIPS 1112 stopping run. AIDA on run R1_1442

09.30 BigRIPS starts run 1113
      BRIKEN starts run 102
      AIDA on run R1_1443

09.55 Beam off

09.57 Beam on

10.32 BRIKEN 102; BigRIPS 1113 stopping run. AIDA on run R1_1457

10.33 BigRIPS starts run 1114
      BRIKEN starts run 103
      AIDA on run R1_1457

10.37 Online analysis of R1_1456, dead time below 0.3%, see attachment 7

11.08 System wide checks OK
      FEE64 temperatures OK - attachment 8
      Good events statistics OK - attachment 9
      Leakage currents OK - attachment 10
      No new merger errors - attachment 11 
      HEC x vs y plot OK - attachment 12
      Zero SortSas

11.30 BRIKEN 103; BigRIPS 1114 stopping run. AIDA on run R1_1470

11.35 BigRIPS starts run 1115
      BRIKEN starts run 104
      AIDA on run R1_1472

12.25 BRIKEN 104; BigRIPS 1115 stopping run. AIDA on run R1_1483, BRIKEN timestamp reset

12.29 DAQ starts
      AIDA file RIBF127R1/R1_1485
      BigRIPS file 1116
      BRIKEN file 105

      DAQs synchronised

13.11 Analysis of R1_1484 - deadtime <0.5%, no timewarps, no MBS timewarps - see attachment 13

13.24 Beam lost AIDA file RIBF127R1/R1_1497
      BRIKEN, BigRIPS DAQs stop

13.28 Beam returns AIDA file RIBF127R1/R1_1497

13.30 DAQ starts
      AIDA file RIBF127R1/R1_1497
      BigRIPS file 1117
      BRIKEN file 106

13.54 Beam lost AIDA file RIBF127R1/R1_1504

13.57 Beam returns AIDA file RIBF127R1/R1_1505

14:30 BigRips and BRIKEN stop their daqs
      AIDA on file R1_1513

14:31 BRIKEN starts file 107
      BigRIPS starts file 1118
      AIDA on file R1_1513

14:36 System wide checks ok

15.29 System wide checks OK
      FEE64 temperatures OK - attachment 14
      Good events statistics OK - attachment 15
      Leakage currents OK - attachment 16
      No new merger errors - attachment 17
      HEC x vs y plot OK - attachment 18
      Zero SortSas

15.31 BigRips 1118 and BRIKEN 107 stop their daqs
      AIDA on file R1_1527

15:31 BRIKEN starts file 108
      BigRIPS starts file 1119
      AIDA on file R1_1527

14.57 Analysis of R1_1532 - deadtime <0.5%, no timewarps, no MBS timewarps - see attachment 19

00:02  Noise in nnaida 1 and 2 appears to be reduced.
       However, some channels in nnaida1, ASIC4 and nnaida2, ASIC 1 have been dropped. See attachment 1

00:05  Analysed RIBF127R1/R1_1314 - see attachment 2
       No timewarps, SYNC100 OK, dead time negligible
       No mismatches between dead time and idle time

00:07  Sorted RIBF127R1/R1_1314 - rates OK

 *** DSSSD # 1 count:     35064 old count:         0 dt:      1.00 s  LEC rate:  35055.03 Hz
 *** DSSSD # 2 count:     49092 old count:         0 dt:      1.00 s  LEC rate:  49079.44 Hz
 *** DSSSD # 3 count:     16520 old count:         0 dt:      1.00 s  LEC rate:  16515.77 Hz
 *** DSSSD # 4 count:     14753 old count:         0 dt:      1.00 s  LEC rate:  14749.23 Hz
 *** DSSSD # 5 count:      7128 old count:         0 dt:      1.00 s  LEC rate:   7126.18 Hz
 *** DSSSD # 6 count:     13937 old count:         0 dt:      1.00 s  LEC rate:  13933.43 Hz
 *** DSSSD # 1 count:        19 old count:         0 dt:      1.00 s  HEC rate:     19.00 Hz
 *** DSSSD # 2 count:        36 old count:         0 dt:      1.00 s  HEC rate:     35.99 Hz
 *** DSSSD # 3 count:        44 old count:         0 dt:      1.00 s  HEC rate:     43.99 Hz
 *** DSSSD # 4 count:        39 old count:         0 dt:      1.00 s  HEC rate:     38.99 Hz
 *** DSSSD # 5 count:        17 old count:         0 dt:      1.00 s  HEC rate:     17.00 Hz
 *** DSSSD # 6 count:         2 old count:         0 dt:      1.00 s  HEC rate:      2.00 Hz
    
       Zero'd all histogram and SortSas

00:10 System console log ttyUSB7 (nnaida1) attached - 3

00:22  BigRIPS & BRIKEN stop runs
       AIDA on file R1_1318

00:26  BigRIPS starts run 1103
       BRIKEN starts run 92
       AIDA on file R1_1319
       Zero'd all SortSas

01:18  DAQ continues OK
       FEE64 temperatures - OK
       Good event statistics - OK
       System wide checks - OK except clock status for nnaida1 (status=6), and ADC calibration for nnaida 1, 21
       No new Merger error messages
       HEC x vs y plot OK - attachment 4

01:26  BigRIPS & BRIKEN stop runs
       AIDA on file R1_1333

01:30  BigRIPS starts run 1104
       BRIKEN starts run 93
       AIDA on file R1_1334

02:06  Finished compressing RIBF127R1/R1_6* and R1_7*
       Beginning compression of RIBF127R1/R1_8* and R1_9*

Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_aidas1-lv_root
                       50G   43G  3.9G  92% /
tmpfs                 3.9G  1.1G  2.9G  27% /dev/shm
/dev/sda1             477M   77M  376M  17% /boot
/dev/mapper/vg_aidas1-lv_home
                      860G  580G  236G  72% /home
/dev/mapper/Data1-data10
                      7.7T  6.6T  824G  89% /data10
/dev/sdg2             7.3T  3.7T  3.7T  50% /ntfs

02:25  BigRIPS & BRIKEN stop runs
       AIDA on file R1_1346

02:27  BigRIPS starts run 1105
       BRIKEN starts run 94
       AIDA on file R1_1347
       
02:31  DAQ continues OK
       Sorted R1_1347. DSSSD rates are

 *** data items:    1044352 (  89746.26 Hz)
 *** ADC events:     125937 (  10822.38 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:     36971 old count:     33324 dt:      1.11 s  LEC rate:  33252.59 Hz
 *** DSSSD # 2 count:     49630 old count:     45531 dt:      1.11 s  LEC rate:  44638.40 Hz
 *** DSSSD # 3 count:     16611 old count:     15180 dt:      1.11 s  LEC rate:  14940.33 Hz
 *** DSSSD # 4 count:     16456 old count:     15001 dt:      1.11 s  LEC rate:  14800.92 Hz
 *** DSSSD # 5 count:      7463 old count:      6781 dt:      1.11 s  LEC rate:   6712.40 Hz
 *** DSSSD # 6 count:     15199 old count:     13737 dt:      1.11 s  LEC rate:  13670.34 Hz
 *** DSSSD # 1 count:        23 old count:        19 dt:      1.11 s  HEC rate:     20.69 Hz
 *** DSSSD # 2 count:        53 old count:        45 dt:      1.11 s  HEC rate:     47.67 Hz
 *** DSSSD # 3 count:        45 old count:        43 dt:      1.11 s  HEC rate:     40.47 Hz
 *** DSSSD # 4 count:        41 old count:        36 dt:      1.11 s  HEC rate:     36.88 Hz
 *** DSSSD # 5 count:        20 old count:        18 dt:      1.11 s  HEC rate:     17.99 Hz
 *** DSSSD # 6 count:         3 old count:         1 dt:      1.11 s  HEC rate:      2.70 Hz

      HEC x vs y plot OK - cleared SortSas

02:40 Leakage currents OK - attachment 5
      FEE64 temperatures OK - attachment 6
      Good events statistics OK - attachment 7
      No new merger errors - attachment 8

03:28 Analysed RIBF127R1/R1_1359 - see attachment 9
      No timewarps, SYNC100 OK
      Dead time OK

03:29  BigRIPS & BRIKEN stop runs
       AIDA on file R1_1360

03:31  BigRIPS starts run 1106
       BRIKEN starts run 95
       AIDA on file R1_1361  

03:48 HEC x vs y plot OK. Cleared SortSas.

04:04 DAQ continues OK
      All system-wide checks OK, *except* nnaida1 clock status (=6) and nnaida1, 21 ADC time calibration

04:30  BigRIPS & BRIKEN stop runs
       AIDA on file R1_1374

04:32  BigRIPS starts run 1107
       BRIKEN starts run 96
       AIDA on file R1_1375

04:34  Sorted R1_1375. DSSSD rates are as follows

 *** data items:    1101465 (  93446.58 Hz)
 *** ADC events:     125547 (  10651.21 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:     44101 old count:     39716 dt:      1.12 s  LEC rate:  39211.50 Hz
 *** DSSSD # 2 count:     64123 old count:     57044 dt:      1.12 s  LEC rate:  57013.65 Hz
 *** DSSSD # 3 count:     18735 old count:     16851 dt:      1.12 s  LEC rate:  16657.84 Hz
 *** DSSSD # 4 count:     18739 old count:     16870 dt:      1.12 s  LEC rate:  16661.40 Hz
 *** DSSSD # 5 count:      7490 old count:      6811 dt:      1.12 s  LEC rate:   6659.58 Hz
 *** DSSSD # 6 count:     15970 old count:     14515 dt:      1.12 s  LEC rate:  14199.40 Hz
 *** DSSSD # 1 count:        26 old count:        24 dt:      1.12 s  HEC rate:     23.12 Hz
 *** DSSSD # 2 count:        43 old count:        39 dt:      1.12 s  HEC rate:     38.23 Hz
 *** DSSSD # 3 count:        50 old count:        46 dt:      1.12 s  HEC rate:     44.46 Hz
 *** DSSSD # 4 count:        40 old count:        36 dt:      1.12 s  HEC rate:     35.57 Hz
 *** DSSSD # 5 count:        17 old count:        16 dt:      1.12 s  HEC rate:     15.12 Hz
 *** DSSSD # 6 count:         7 old count:         6 dt:      1.12 s  HEC rate:      6.22 Hz
  
04:36 Leakage currents OK - attachment 10
      FEE64 temperatures OK - attachment 11
      Good events statistics OK - attachment 12
      No new merger errors - attachment 13

05:09 DAQ continues OK. Analysed RIBF127R1/R1_1383 - see attachment 14
      No timewarps, SYNC100 OK
      Dead time OK
      
      Hit pattern OK - see attachment 15

05:28 Beam lost. BRIKEN & BigRIPS stopping run.
      AIDA on run RIBF127R1/R1_1387

05:31 Beam is back. Issue unclear.
      BigRIPS starts run 1108
      BRIKEN starts run 97
      AIDA on run R1_1388

05:37 Lost beam again. It appears to be an issue with "power"
      AIDA on run RIBF127R1/R1_1389
      BRIKEN & BigRIPS still running.
 
05:39 BigRIPS no longer sending signal: lost synchronisation.

05:43 Beam is back. Synchronisation is back.
      BRIKEN & BigRIPS stopping run.

05:47 BigRIPS starts run 1109
      BRIKEN starts run 98
      AIDA on run R1_1391

05:53 Analysed R1_1391 - see attachment 16
      No timewarps, SYNC100 OK
      Dead time OK
      
      DAQ continues OK

06:05 Sorted R1_1395. DSSSD rates as follows

 *** data items:    1158578 ( 105681.80 Hz)
 *** ADC events:     120781 (  11017.26 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:     54590 old count:     48655 dt:      1.12 s  LEC rate:  48746.42 Hz
 *** DSSSD # 2 count:     79085 old count:     70259 dt:      1.12 s  LEC rate:  70619.36 Hz
 *** DSSSD # 3 count:     24651 old count:     21385 dt:      1.12 s  LEC rate:  22012.24 Hz
 *** DSSSD # 4 count:     20753 old count:     18595 dt:      1.12 s  LEC rate:  18531.50 Hz
 *** DSSSD # 5 count:      8376 old count:      7452 dt:      1.12 s  LEC rate:   7479.39 Hz
 *** DSSSD # 6 count:     17321 old count:     15715 dt:      1.12 s  LEC rate:  15466.88 Hz
 *** DSSSD # 1 count:        27 old count:        24 dt:      1.12 s  HEC rate:     24.11 Hz
 *** DSSSD # 2 count:        43 old count:        38 dt:      1.12 s  HEC rate:     38.40 Hz
 *** DSSSD # 3 count:        41 old count:        35 dt:      1.12 s  HEC rate:     36.61 Hz
 *** DSSSD # 4 count:        38 old count:        33 dt:      1.12 s  HEC rate:     33.93 Hz
 *** DSSSD # 5 count:        14 old count:        14 dt:      1.12 s  HEC rate:     12.50 Hz
 *** DSSSD # 6 count:         1 old count:         1 dt:      1.12 s  HEC rate:      0.89 Hz

06:19 Leakage currents OK - attachment 17
      FEE64 temperatures OK - attachment 18
      Good events statistics OK - attachment 19
      No new merger errors - attachment 20

06:23 HEC x vs y plot OK - attachment 21
      Zero'd all SortSas
      
06:27 Lost the beam. AIDA on run R1_1401. 
      Same "power-related" issue as before. Expected 2-3 minutes shutdown.
      Lost synchronisation.

06:32 Beam is back. Synchronisation is back.
      BRIKEN & BigRIPS stopping run.

06:33 BigRIPS starts run 1110
      BRIKEN starts run 99
      AIDA on run R1_1402

06:58 DAQ continues OK
      HEC x vs y plot OK - attachment 22
      Zero'd all SortSas
      
      Analysed R1_1407 - attachment 23
      No timewarps, SYNC100 OK
      Dead time OK

07:06 Sorted R1_1407. Pulser events are still synchronised - attachment 24

07:30 BRIKEN & BigRIPS stopping run.
      AIDA on run R1_1415

07:33 BigRIPS starts run 1111
      BRIKEN starts run 100
      AIDA on run R1_1416

07:35 Leakage currents OK - attachment 25
      FEE64 temperatures OK - attachment 26
      Good events statistics OK - attachment 27
      No new merger errors - attachment 28
      HEC x vs y plot OK
      Zero'd SortSas

16.34  Beam is off
       Aida R_1216, BRIKEN (83)/BigRIPS (1094) continue to run for background data

16.40  BRIKEN run 83 and BigRIPS run 1094 stopping daqs
       AIDA on file R1_1218

16.44  Still no beam, running background
       BigRIPS starts run 1095
       BRIKEN starts run  84
       Aida on file R1_1218

17.55  Still no beam, running background
       System wide checks all ok
       FEE temperatures all ok - attachment 1
       Good events statistics - attachment 2
       Bias and leakage currents ok - attachment 3
       Merger ok - attachment 4

17.58  Beam on, AIDA file R1_1234

17.59  Briken run 84 and BigRIPS run 1095 stopping daqs 
       AIDA on file R1_1234

18.00  BigRIPS starts run 1096
       BRIKEN starts run  85
       Aida on file R1_1234
       Zero'd online SAS spectra

19.00  BRIKEN run 85 and BigRIPS run 1096 stopping daqs 
       AIDA on file R1_1248

19.02  BigRIPS starts run 1097
       BRIKEN starts run  86
       Aida on file R1_1248
 
19.04  Online analysis: DSSSD HEC x versus y spectra - see attachment 5

20.00  BRIKEN run 86 and BigRIPS run 1097 stopping daqs 
       AIDA on file R1_1261

20.01  BigRIPS starts run 1098
       BRIKEN starts run  87
       Aida on file R1_1261

20.04  Beam is off
       Aida R_1262, BRIKEN (87)/BigRIPS (1098) continue to run for background data

20.15  System wide checks all ok
       FEE temperatures all ok - attachment 6
       Good events statistics - attachment 7
       Bias and leakage currents ok - attachment 8
       Merger ok - attachment 9

20.21  BRIKEN run 87 and BigRIPS run 1098 stopping daqs because beam about to be switched back on
       AIDA on file R1_1265

20.22  Beam on
       BigRIPS starts run 1099
       BRIKEN starts run  88
       Aida on file R1_1266

21.18  Online analysis: DSSSD HEC x versus y spectra - see attachment 10
       Zero'd SAS spectra

21.19  BRIKEN run 88 and BigRIPS run 1099 stopping daqs 
       AIDA on file R1_1278

21.20  BigRIPS starts run 1100
       BRIKEN starts run  89
       Aida on file R1_1279

22.05  System wide checks all ok
       FEE temperatures all ok - attachment 11
       Good events statistics - attachment 12
       Bias and leakage currents ok - attachment 13
       Merger ok - attachment 14

22.17  Analysis of file RIBF127R1/R1_1290 - dead time < 0.4% - see attachment 15

22.18  BRIKEN run 89 and BigRIPS run 1100 stopping daqs 
       AIDA on file R1_1291

22.20  BigRIPS starts run 1101
       BRIKEN starts run  90
       Aida on file R1_1292

22.24  Online analysis: DSSSD HEC x versus y spectra - see attachment 16
       Zero'd SAS spectra

23.20  BRIKEN run 90 and BigRIPS run 1101 stopping daqs 
       AIDA on file R1_1305

23.22  BigRIPS starts run 1102
       BRIKEN starts run  91
       Aida on file R1_1305

23.48  System wide checks all ok
       FEE temperatures all ok - attachment 17
       Good events statistics - attachment 18
       Bias and leakage currents ok - attachment 19
       Merger ok - attachment 20

08:05 Briken and BigRIPS stopping daqs
      AIDA on file R1_1099

08:07 BigRIPS starts run 1088
      BRIKEN starts run  77

08:13 System wide checks all ok
      FEE temperatures all ok - attachment 1
      Good events statistics - attachment 2

08:50 Bias and leakage currents ok - attachment 3

09:04 BigRIPS and BRIKEN stop daqs
      AIDA on file R1_1113

09:05 BigRIPS starts run 1089
      BRIKEN starts run 78
      AIDA on file R1_1113

09:22 Beam lost AIDA on file R1_1117

09:26 Beam back AIDA on file R1_1118

10:06 BigRIPS and BRIKEN stop daqs
      AIDA on file R1_1128

10:07 BigRIPS starts run 1090
      BRIKEN starts run 79
      AIDA on file R1_1128

10:12 System wide checks ok

10:24 DSSD rates from R1_1131
 *** DSSSD # 1 count:     88384 old count:     45978 dt:      1.01 s  LEC rate:  42084.25 Hz
 *** DSSSD # 2 count:    119845 old count:     62135 dt:      1.01 s  LEC rate:  57272.13 Hz
 *** DSSSD # 3 count:     40809 old count:     21150 dt:      1.01 s  LEC rate:  19509.84 Hz
 *** DSSSD # 4 count:     37059 old count:     18986 dt:      1.01 s  LEC rate:  17935.87 Hz
 *** DSSSD # 5 count:     14947 old count:      7772 dt:      1.01 s  LEC rate:   7120.56 Hz
 *** DSSSD # 6 count:     29809 old count:     15349 dt:      1.01 s  LEC rate:  14350.29 Hz
 *** DSSSD # 1 count:        35 old count:        16 dt:      1.01 s  HEC rate:     18.86 Hz
 *** DSSSD # 2 count:       108 old count:        56 dt:      1.01 s  HEC rate:     51.61 Hz
 *** DSSSD # 3 count:        77 old count:        38 dt:      1.01 s  HEC rate:     38.70 Hz
 *** DSSSD # 4 count:        76 old count:        35 dt:      1.01 s  HEC rate:     40.69 Hz
 *** DSSSD # 5 count:        27 old count:        15 dt:      1.01 s  HEC rate:     11.91 Hz
 *** DSSSD # 6 count:         4 old count:         2 dt:      1.01 s  HEC rate:      1.98 Hz

11:07 BigRIPS and BRIKEN stop their daqs
      AIDA on file R1_1142

11:08 BigRIPS starts run 1091
      BRIKEN starts run 80
      AIDA on file R1_1142

11:10 Leakages and biases ok - attachment 4

11.36 DAQ continues OK
      Attached HEC x vs y - attach 5
      Zero'd HEC x vs y

11.59 Analysed R1_1153 - see attachment 6
      No timewarps
      Dead time negligible
      All OK

12:06 BigRIPS and BRIKEN stop their daqs
      AIDA on file R1_1156

12:07 BigRIPS starts run1092
      BRIKEN starts run 81
      AIDA on file R1_1156

13:07 BigRIPS and BRIKEN stop daqs
      AIDA on file R1_1170

13:08 BRIKEN starts run 82
      BigRIPS starts run 1093
      AIDA on file R1_1170

13:11 System wide checks ok

13:55 BRIKEN and BigRIPS stop their daqs
      AIDA on file R1_1181
      Beam gone

14:11 Bias and leakage currents ok - attachment 7
      Ambient Temperature 23.9C - Humidity 37.3% - D.P +8.3

15:26 Beam is back
      AIDA on file R1_1201

15:07 BigRIPS starts run 1094
      BRIKEN starts run 83
      AIDA on file R1_1201

15:34 System wide checks ok
      FEE temperatures ok - attachment 8
      Good Events statistics - attachment 9

15:39 No beam - beam back

15:46 Beam gone for couple of minutes

15:50 Beam back

00:35   Beam is on
        current AIDA file R1_996

00:36   BRIKEN start run 72
        BigRIPS start run 1083
        AIDA file RIBF127R1/R1_996

00:55   Beam is off but DAQ of BRIKEN and BigRIPS are still running)
        expecting it will be back within 10 minutes
        AIDA file R1_1001

00:57   Analysis of file RIBF127R1/R1_1000 - dead time < 0.4% - see attachment 1

01:03   Beam is on
        DAQ is running continuously

01:15   statistics normal
        system wide checks ok 
        leakage current and bias ok see attachment 2
        merger and tapeserver ok

01:25   BigRIPS and BRIKEN stop their runs
        current AIDA run R1_1007

01:26   BRIKEN start run 73
        BigRIPS start run 1084
        AIDA on file R1_1008

01:36   FEE temperature is normal see attachment 3

02:22   BigRIPS and BRIKEN stop their runs
        current AIDA run R1_1021

02:23   high energy correlation between x and y attachment 4
        AIDA run R1_1021

02:26   BRIKEN start run 74
        BigRIPS start run 1085
        AIDA on file R1_1023 

03:00   System wide checks all ok      
        FEE temperatures ok - attachment 5
        Good event statistics - attachment 6
        Merger and tape server still running - attachment 7

03:06   Leakages and bias ok - attachment 8

03:09   Beam is OFF

03:11   BigRIPS and BRIKEN stop their runs
        current AIDA run R1_1033

04:10   Beam is still OFF 
        Investigation is still going on, on the ion source. 
        (Ion source were getting down more and more frequently before)

04:49   FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok 
        merger and tapeserver ok
        (waiting beam) 

06:01   Beam is ON
        AIDA run R1_1069

06:02   BRIKEN start run 75
        BigRIPS start run 1086
        AIDA on file R1_1070

06:08   FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok see attachment 9 
        merger and tapeserver ok

06:20   Analysis of file RIBF127R1/R1_1072 - dead time < 0.6% (most of the FEE cards have 0.0%) - see attachment 10

07:01   high energy correlation between x and y attachment 11
        AIDA run R1_1084

07:02   BigRIPS and BRIKEN stop their runs
        current AIDA run R1_1084

07:04   BRIKEN start run 76
        BigRIPS start run 1087
        AIDA on file R1_1085

07:16 per DSSSD rates file RIBF127R1/R1_1086
 *** DSSSD # 1 count:     92842 old count:     41280 dt:      1.05 s  LEC rate:  49071.92 Hz
 *** DSSSD # 2 count:    124879 old count:     56250 dt:      1.05 s  LEC rate:  65314.71 Hz
 *** DSSSD # 3 count:     44779 old count:     19466 dt:      1.05 s  LEC rate:  24090.56 Hz
 *** DSSSD # 4 count:     37971 old count:     18208 dt:      1.05 s  LEC rate:  18808.59 Hz
 *** DSSSD # 5 count:     15612 old count:      7434 dt:      1.05 s  LEC rate:   7783.06 Hz
 *** DSSSD # 6 count:     31207 old count:     14708 dt:      1.05 s  LEC rate:  15702.22 Hz
 *** DSSSD # 1 count:        27 old count:        11 dt:      1.05 s  HEC rate:     15.23 Hz
 *** DSSSD # 2 count:        89 old count:        43 dt:      1.05 s  HEC rate:     43.78 Hz
 *** DSSSD # 3 count:        82 old count:        44 dt:      1.05 s  HEC rate:     36.16 Hz
 *** DSSSD # 4 count:        65 old count:        32 dt:      1.05 s  HEC rate:     31.41 Hz
 *** DSSSD # 5 count:        29 old count:        17 dt:      1.05 s  HEC rate:     11.42 Hz
 *** DSSSD # 6 count:         6 old count:         3 dt:      1.05 s  HEC rate:      2.86 Hz

07:22   FEE's temperature normal - see attachment 12
        statistics normal - see attachment 13
        system wide checks ok 
        leakage current and bias ok
        merger and tapeserver ok - see attachment 14

16.44 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_886

16.47 BRIKEN start run 64
      BigRIPS start run 1075
      AIDA file RIBF127R1/R1_887

      *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

17.10 FEE64 Temperatures OK - see attachment 1
      Detector biases & leakage currents OK - see attachments 1
      Good events statistics OK - see attachment 3
      No new merger error messages - see attachment 4

      *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
      all SortSas spectra zero'd

17.40 Analysis of file RIBF127R1/R1_898 - dead time < 0.5% - see attachment 5

17.44 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_900

17.46 BRIKEN start run 65
      BigRIPS start run 1076
      AIDA file RIBF127R1/R1_901

18.27 Online analysis: DSSSD HEC x versus y spectra - see attachment 6

18.46 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_915

18.47 BRIKEN start run 66
      BigRIPS start run 1077
      AIDA file RIBF127R1/R1_915

18.54 FEE64 Temperatures OK - see attachment 7
      Detector biases & leakage currents OK - see attachments 8
      Good events statistics OK - see attachment 9
      No new merger error messages - see attachment 10
      *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
      All SortSas spectra zero'd

19.50 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_930

19.52 BRIKEN start run 67
      BigRIPS start run 1078
      AIDA file RIBF127R1/R1_930

20.01 Analysis of file RIBF127R1/R1_931 - dead time < 0.5% - see attachment 11

20.41 FEE64 Temperatures OK - see attachment 12
      Detector biases & leakage currents OK - see attachment 13
      Good events statistics OK - see attachment 14
      No new merger error messages - see attachment 15
      *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

20.47 Online analysis: DSSSD HEC x versus y spectra - see attachment 16
      All SortSas spectra zero'd

20.52 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_944

20.54 BRIKEN start run 68
      BigRIPS start run 1079 
      AIDA file RIBF127R1/R1_945

21.51 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_958

21.52 BRIKEN start run 69
      BigRIPS start run 1080 
      AIDA file RIBF127R1/R1_959

21.59 Analysis of file RIBF127R1/R1_959 - dead time < 0.5% - see attachment 17

22.40 FEE64 Temperatures OK - see attachment 18
      Detector biases & leakage currents OK - see attachment 19
      Good events statistics OK - see attachment 20
      No new merger error messages - see attachment 21
      *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

22.42 Online analysis: DSSSD HEC x versus y spectra - see attachment 22
      All SortSas spectra zero'd

22.55 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_974

22.56 BRIKEN start run 70
      BigRIPS start run 1081 
      AIDA file RIBF127R1/R1_974

23.18 Beam is off (SRC is down)
      AIDA file RIBF127R1/R1_979
      DAQ stop BigRIPS, BRIKEN

23.24 Beam is back
      Current AIDA file RIBF127R1/R1_980

23.25 BRIKEN start run 71      
      BigRIPS start run 1082
      AIDA file RIBF127R1/R1_981

23.47 *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
      FEE64 Temperatures OK - see attachment 23
      Detector biases & leakage currents OK - see attachment 24
      Good events statistics OK - see attachment 25
      No new merger error messages - see attachment 26

23.52 Analysis of file RIBF127R1/R1_986 - dead time < 0.5% - see attachment 27

00:01 Beam is off
      DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_989

07.57 run continues
      BRIKEN start run 55
      BigRIPS start run 1066
      AIDA file RIBF127R1/R1_763

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      84Zn BigRIPS setting, 78Ni degrader setting - 5mm (in F7) + 9mm (in F11) + 1mm (in F11) = 16 mm Al


09.01 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_779

09.03 BRIKEN start run 56
      BigRIPS start run 1067
      AIDA file RIBF127R1/R1_779

09.32 Beam dropped
      AIDA file RIBF127R1/R1_786

09.38 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_788

09.43 Beam is back      
      BRIKEN start run 57
      BigRIPS start run 1068
      AIDA file RIBF127R1/R1_789      

09.55 Beam is off
      There will be no beam for 1 hour, accelerator people want to check the ion source.
      DAQ stop BigRIPS, BRIKEN
      AIDA file R1_792

10.29 Beam is back
      BRIKEN start run 58
      BigRIPS start run 1069
      AIDA file 799
      Beam intensity reduced half, then slowly increasing


11.29 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_813

11.29 BRIKEN start run 59
      BigRIPS start run 1070
      AIDA file RIBF127R1/R1_813
      
11.32 Sorted file RIBF127R1/R1_811. DSSSD rates are as follows

*** data items:    2431382 ( 108760.05 Hz)
 *** ADC events:     260316 (  11644.40 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:    109746 old count:     88603 dt:      2.40 s  LEC rate:  45784.75 Hz
 *** DSSSD # 2 count:    148624 old count:    119105 dt:      2.40 s  LEC rate:  62004.19 Hz
 *** DSSSD # 3 count:     50556 old count:     40453 dt:      2.40 s  LEC rate:  21091.37 Hz
 *** DSSSD # 4 count:     43410 old count:     35484 dt:      2.40 s  LEC rate:  18110.14 Hz
 *** DSSSD # 5 count:     17933 old count:     14701 dt:      2.40 s  LEC rate:   7481.44 Hz
 *** DSSSD # 6 count:     36412 old count:     30468 dt:      2.40 s  LEC rate:  15190.66 Hz
 *** DSSSD # 1 count:        42 old count:        40 dt:      2.40 s  HEC rate:     17.52 Hz
 *** DSSSD # 2 count:        85 old count:        70 dt:      2.40 s  HEC rate:     35.46 Hz
 *** DSSSD # 3 count:        85 old count:        76 dt:      2.40 s  HEC rate:     35.46 Hz
 *** DSSSD # 4 count:        58 old count:        51 dt:      2.40 s  HEC rate:     24.20 Hz
 *** DSSSD # 5 count:        35 old count:        28 dt:      2.40 s  HEC rate:     14.60 Hz
 *** DSSSD # 6 count:         7 old count:         6 dt:      2.40 s  HEC rate:      2.92 Hz
     

11.40 Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      good events statistics OK - see attachment 3
      No new merger error messages - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
      all SortSas spectra zero'd

11.45 Analysed RIBF127R1/R1_815 - see attachment 5
      No timewarps
      Negligible deadtime. No idle time issues.

11.49 System console log ttyUSB7 (nnaida1) attached - see attachment 6
      Current HEC hit pattern OK - see attachment 7


12.40 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_829

12.43 BRIKEN start run 60
      BigRIPS start run 1071
      AIDA file RIBF127R1/R1_830

13.45 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_844

13.46 BRIKEN start run 61
      BigRIPS start run 1072
      AIDA file RIBF127R1/R1_845
      
      all SortSas online spectra zero'd
      x-y hit pattern OK

13:56 System wide checks all ok
      Screenshots included for merger, statistics and FEE temperatures - attachments 8-10

14:04 leakages and Biases ok - attachment 11

14.46 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_858

14.47 BRIKEN start run 62
      BigRIPS start run 1073
      AIDA file RIBF127R1/R1_858
      
      all SortSas online spectra zero'd

14:56 online analysis x-y hit pattern OK - attachment 12

15.46 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_872

15.47 BRIKEN start run 63
      BigRIPS start run 1074
      AIDA file RIBF127R1/R1_872

15.57 R1_873.txt checked
      No timewarps
      Negligible deadtime. No idle time issues.


16.22 Detector biases & leakage currents OK - see attachments 14
      No new merger error messages - see attachment 15
      FEE64 Temperatures OK - see attachment 16
      good events statistics OK - see attachment 17


      

00.48 BigRIPS DAQ now running

      BRIKEN start run 48
      BigRIPS start run 1059
      AIDA file RIBF127R1/R1_664

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      84Zn BigRIPS setting, 78Ni degrader setting - 5mm (in F7) + 9mm (in F11) + 1mm (in F11) = 16 mm Al

00.59 *all* online and SortSas histograms zero'd 

01.06 Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

01.21 analysis of file RIBF127R1/R1_672 - dead time < 0.5% - see attachment 6

01.25 online analysis - ADC data synchronised - see attachment 7

01.27 per DSSSD HEC x versus y spectra - see attachment 8

01.30 per DSSSD rates file RIBF127R1/R1_674

 *** DSSSD # 1 count:    262381 old count:    211655 dt:      1.01 s  LEC rate:  50193.72 Hz
 *** DSSSD # 2 count:    349331 old count:    280852 dt:      1.01 s  LEC rate:  67760.43 Hz
 *** DSSSD # 3 count:    122673 old count:     97882 dt:      1.01 s  LEC rate:  24530.86 Hz
 *** DSSSD # 4 count:    105174 old count:     84961 dt:      1.01 s  LEC rate:  20000.90 Hz
 *** DSSSD # 5 count:     40546 old count:     32480 dt:      1.01 s  LEC rate:   7981.36 Hz
 *** DSSSD # 6 count:     79704 old count:     63990 dt:      1.01 s  LEC rate:  15549.11 Hz
 *** DSSSD # 1 count:       106 old count:        86 dt:      1.01 s  HEC rate:     19.79 Hz
 *** DSSSD # 2 count:       231 old count:       182 dt:      1.01 s  HEC rate:     48.49 Hz
 *** DSSSD # 3 count:       198 old count:       152 dt:      1.01 s  HEC rate:     45.52 Hz
 *** DSSSD # 4 count:       204 old count:       157 dt:      1.01 s  HEC rate:     46.51 Hz
 *** DSSSD # 5 count:        72 old count:        61 dt:      1.01 s  HEC rate:     10.88 Hz
 *** DSSSD # 6 count:         7 old count:         6 dt:      1.01 s  HEC rate:      0.99 Hz

01.54 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_679

01.58 BRIKEN start run 49
      BigRIPS start run 1060
      AIDA file RIBF127R1/R1_680

02.25 AIDA-BRIKEN-BigRIPS DAQ sync OK

02.58 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_694

03.00 BRIKEN start run 50
      BigRIPS start run 1061
      AIDA file RIBF127R1/R1_694

03.06 Detector biases & leakage currents OK - see attachments 9 & 10
      FEE64 Temperatures OK - see attachment 11
      good events statistics OK - see attachment 12
      1 error message reported by merger since DAQ GO - see attachment 13

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

03.14 analysis of file RIBF127R1/R1_697 - dead time < 0.5% - see attachment 14

03.17 online analysis - ADC & disc data synchronised - see attachment 15
      per DSSSD HEC x versus y spectra - see attachment 16

03.19 per DSSSD rates file RIBF127R1/R1_699

 *** DSSSD # 1 count:    181020 old count:    126616 dt:      1.03 s  LEC rate:  52680.27 Hz
 *** DSSSD # 2 count:    242594 old count:    169469 dt:      1.03 s  LEC rate:  70808.12 Hz
 *** DSSSD # 3 count:     87966 old count:     61977 dt:      1.03 s  LEC rate:  25165.57 Hz
 *** DSSSD # 4 count:     77118 old count:     55136 dt:      1.03 s  LEC rate:  21285.53 Hz
 *** DSSSD # 5 count:     31436 old count:     22904 dt:      1.03 s  LEC rate:   8261.67 Hz
 *** DSSSD # 6 count:     61421 old count:     44839 dt:      1.03 s  LEC rate:  16056.62 Hz
 *** DSSSD # 1 count:       102 old count:        76 dt:      1.03 s  HEC rate:     25.18 Hz
 *** DSSSD # 2 count:       179 old count:       134 dt:      1.03 s  HEC rate:     43.57 Hz
 *** DSSSD # 3 count:       136 old count:        92 dt:      1.03 s  HEC rate:     42.61 Hz
 *** DSSSD # 4 count:       136 old count:        93 dt:      1.03 s  HEC rate:     41.64 Hz
 *** DSSSD # 5 count:        62 old count:        56 dt:      1.03 s  HEC rate:      5.81 Hz
 *** DSSSD # 6 count:         8 old count:         4 dt:      1.03 s  HEC rate:      3.87 Hz

03.20 all SortSas spectra zero'd

03.33 histogram layouts 1-8 - see attachments 17-26
      all histograms zero'd

03.59 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_709

04.03 BRIKEN start run 51
      BigRIPS start run 1062
      AIDA file RIBF127R1/R1_710

05.01 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_722

05.03 BRIKEN start run 52
      BigRIPS start run 1063
      AIDA file RIBF127R1/R1_723

05.06 Detector biases & leakage currents OK - see attachments 27 & 28
      FEE64 Temperatures OK - see attachment 29
      good events statistics OK - see attachment 30
      1 error message reported by merger since DAQ GO - see attachment 31

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

05.12 analysis of file RIBF127R1/R1_725 - dead time < 0.5% - see attachment 32

03.14 online analysis - ADC & disc data synchronised - see attachment 33
      per DSSSD HEC x versus y spectra - see attachment 34

05.16 per DSSSD rates file RIBF127R1/R1_727

 *** DSSSD # 1 count:    207037 old count:    154849 dt:      1.04 s  LEC rate:  50002.29 Hz
 *** DSSSD # 2 count:    284982 old count:    210778 dt:      1.04 s  LEC rate:  71096.22 Hz
 *** DSSSD # 3 count:     97704 old count:     72256 dt:      1.04 s  LEC rate:  24382.20 Hz
 *** DSSSD # 4 count:     86608 old count:     65020 dt:      1.04 s  LEC rate:  20683.86 Hz
 *** DSSSD # 5 count:     31556 old count:     23485 dt:      1.04 s  LEC rate:   7732.97 Hz
 *** DSSSD # 6 count:     63379 old count:     47102 dt:      1.04 s  LEC rate:  15595.29 Hz
 *** DSSSD # 1 count:        72 old count:        51 dt:      1.04 s  HEC rate:     20.12 Hz
 *** DSSSD # 2 count:       176 old count:       124 dt:      1.04 s  HEC rate:     49.82 Hz
 *** DSSSD # 3 count:       163 old count:       116 dt:      1.04 s  HEC rate:     45.03 Hz
 *** DSSSD # 4 count:       153 old count:       126 dt:      1.04 s  HEC rate:     25.87 Hz
 *** DSSSD # 5 count:        53 old count:        37 dt:      1.04 s  HEC rate:     15.33 Hz
 *** DSSSD # 6 count:         8 old count:         3 dt:      1.04 s  HEC rate:      4.79 Hz

05.51 all SortSas spectra zero'd

05.54 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_735

07.01 BRIKEN start run 53
      BigRIPS start run 1064
      AIDA file RIBF127R1/R1_738

06.38 beam lost - ion source problem - AIDA file RIBF127R1/R1_745 - continue as background run

07.11 Detector biases & leakage currents OK - see attachments 35 & 36
      FEE64 Temperatures OK - see attachment 37
      good events statistics OK - see attachment 38
      1 error message reported by merger since DAQ GO - see attachment 39

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

07.17 analysis of file RIBF127R1/R1_754 - dead time < 0.5% - see attachment 40

07.19 online analysis - ADC & disc data synchronised - see attachment 41
      per DSSSD HEC x versus y spectra - see attachment 42

07.19 beam back

07.20 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_755

07.22 BRIKEN start run 54
      BigRIPS start run 1065
      AIDA file RIBF127R1/R1_756

07.24 per DSSSD rates file RIBF127R1/R1_756

 *** DSSSD # 1 count:    142610 old count:     89049 dt:      1.04 s  LEC rate:  51612.27 Hz
 *** DSSSD # 2 count:    191205 old count:    119983 dt:      1.04 s  LEC rate:  68630.70 Hz
 *** DSSSD # 3 count:     66544 old count:     40853 dt:      1.04 s  LEC rate:  24756.27 Hz
 *** DSSSD # 4 count:     60318 old count:     38762 dt:      1.04 s  LEC rate:  20771.72 Hz
 *** DSSSD # 5 count:     23029 old count:     14967 dt:      1.04 s  LEC rate:   7768.68 Hz
 *** DSSSD # 6 count:     45712 old count:     29870 dt:      1.04 s  LEC rate:  15265.61 Hz
 *** DSSSD # 1 count:        66 old count:        46 dt:      1.04 s  HEC rate:     19.27 Hz
 *** DSSSD # 2 count:       122 old count:        78 dt:      1.04 s  HEC rate:     42.40 Hz
 *** DSSSD # 3 count:       116 old count:        70 dt:      1.04 s  HEC rate:     44.33 Hz
 *** DSSSD # 4 count:        98 old count:        67 dt:      1.04 s  HEC rate:     29.87 Hz
 *** DSSSD # 5 count:        41 old count:        29 dt:      1.04 s  HEC rate:     11.56 Hz
 *** DSSSD # 6 count:         8 old count:         6 dt:      1.04 s  HEC rate:      1.93 Hz

07.25 all SortSas spectra zero'd

07.53 beam lost - RF problem -  AIDA file RIBF127R1/R1_764

07.55 DAQ stop BigRIPS, BRIKEN
      AIDA file RIBF127R1/R1_763

07.57 beam back

07.57 BRIKEN start run 55
      BigRIPS start run 1066
      AIDA file RIBF127R1/R1_763

aidas1> cd /MIDAS/Merger/AIDA
aidas1> ls
GS_configuration   GS_configuration.BAK-030516  Startup~
GS_configuration~  Startup                      Startup.BAK-010617
aidas1> diff Startup Startup.BAK-010617
63,64c63
< # 1 June 2017 - increase sleep time from 1000000 (11.6 days) to 150000000 (4.75 years)
< sleep 150000000
---
> sleep 1000000
aidas1> cd /MIDAS/TapeServer/startup
aidas1> ls
AidaTapeServer  AidaTapeServer~  AidaTapeServer.BAK-010617
aidas1> diff AidaTapeServer AidaTapeServer.BAK-010617
24,26c24
< # 1 June 2017 - increase sleep time from 1000000 (11.6 days) to 150000000 (4.75 years)
< sleep 150000000
< 
---
> sleep 1000000

16:30  Check online data ok (R1_533) see attachment 1

16:39  BigRips and BRIKEN stop their runs
       AIDA on file R1_550

16:43  Beam is off

16:47  All degraders completely removed 
       Beam on 
       current AIDA run R1_551

16:48  BRIKEN start run 40
       BigRIPS start run 1041
       AIDA on file R1_551

16:57  BigRIPS and BRIKEN stop their runs
       AIDA on file R1_554
       high energy correlation between x and y attachment 2 

16:57  Beam is off
       Degrader back to its place, thickness 14 mm

17:00  Checked chiller level - 50% 

17:01  Beam is on

17:02  BRIKEN start run 41
       BigRIPS start run 1042
       AIDA on file R1_555

17:16  FEE's temperature normal
       statistics normal
       system wide checks ok 
       leakage current and bias ok see attachment 3
       merger and tapeserver ok

17:17  high energy correlation between x and y attachment 4 
       current AIDA run R1_558

18:02  Beam is off
       current AIDA file Run R1_570
       BigRIPS and BRIKEN stop their runs

       RH = 41.3%, T=24.3 C, DP=10.3 C
       Degrader now 5 (in F7) + 6 (in F11) + 3 (in F11) = 14 mm
       Refilled chiller - >95%

18:42  Beam is on

18:57  The optimization of beam tuning is going on       

19:20  Optimization of beam done

19.28 BRIKEN start run 42
      BigRIPS start run 1053
      AIDA on file R1_588

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      84Zn degrader setting - 5mm (in F7) + 6mm (in F11) + 3mm (in F11) = 14 mm 

19.41 Detector biases; leakage currents OK - see attachments 5 & 6
      FEE64 Temperatures OK - see attachment 7
      good events statistics OK - see attachment 8
      No warnings/errors reported by merger since DAQ GO - see attachment 9

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

20.19 DAQ stops 
      AIDA file RIBF127R1/R1_601
      
      analysis of R1_601 dead time <0.5% - see attachment 10
      online analysis - ADC data synchronised - see attachment 12 

      online analysis per FEE64 HEC x versus y - attachment 11 mid-run - all SortSas spectra cleared -
attachment 13 end of run
      why does x-y distribution appear to change?
      distributions centred OK but now broader in x

20.20-20.39 various variable degrader settings to establish approximate degrader setting for 78Ni

20.39 BRIKEN start run 44
      BigRIPS start run 1054
      AIDA on file R1_606

      78Ni degrader setting (to be checked) 5mm Al (fixed F7) + 9mm Al (fixed F11) + 1mm Al (variable F11) = 15mm Al

      Offline sort of R1_602 for rates

 *** DSSSD # 1 count:    156234 old count:    115866 dt:      1.04 s  LEC rate:  38664.03 Hz
 *** DSSSD # 2 count:    205986 old count:    152716 dt:      1.04 s  LEC rate:  51021.42 Hz
 *** DSSSD # 3 count:     72980 old count:     54270 dt:      1.04 s  LEC rate:  17920.23 Hz
 *** DSSSD # 4 count:     63677 old count:     45811 dt:      1.04 s  LEC rate:  17111.86 Hz
 *** DSSSD # 5 count:     24253 old count:     17204 dt:      1.04 s  LEC rate:   6751.45 Hz
 *** DSSSD # 6 count:     48843 old count:     34242 dt:      1.04 s  LEC rate:  13984.68 Hz
 *** DSSSD # 1 count:        75 old count:        52 dt:      1.04 s  HEC rate:     22.03 Hz
 *** DSSSD # 2 count:       114 old count:        82 dt:      1.04 s  HEC rate:     30.65 Hz
 *** DSSSD # 3 count:       118 old count:        78 dt:      1.04 s  HEC rate:     38.31 Hz
 *** DSSSD # 4 count:       107 old count:        67 dt:      1.04 s  HEC rate:     38.31 Hz
 *** DSSSD # 5 count:        54 old count:        30 dt:      1.04 s  HEC rate:     22.99 Hz
 *** DSSSD # 6 count:         4 old count:         4 dt:      1.04 s  HEC rate:      0.00 Hz

20.50 all online histograms zero'd

21:21 analysed run from R1_588 to R1_601, couldn't find any timewraps. 

21:41  BigRips and BRIKEN stop their runs
       AIDA on file R1_620

21:44  BRIKEN start run 45
       BigRIPS start run 1055
       AIDA on file R1_621

22:04  FEE's temperature normal
       statistics normal
       system wide checks ok 
       leakage current and bias ok see attachment 14
       merger and tapeserver ok

22:41  BigRips and BRIKEN stop their runs
       AIDA on file R1_634

22:43  BRIKEN start run 46
       BigRIPS start run 1056
       AIDA on file R1_635

Offline sort of R1_635 for rates

 *** data items:    3524688 ( 108739.47 Hz)
 *** ADC events:     372675 (  11497.32 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:    160274 old count:    151136 dt:      3.43 s  LEC rate:  46708.84 Hz
 *** DSSSD # 2 count:    216907 old count:    205441 dt:      3.43 s  LEC rate:  63213.47 Hz
 *** DSSSD # 3 count:     74841 old count:     71214 dt:      3.43 s  LEC rate:  21811.00 Hz
 *** DSSSD # 4 count:     67870 old count:     63212 dt:      3.43 s  LEC rate:  19779.44 Hz
 *** DSSSD # 5 count:     25688 old count:     23773 dt:      3.43 s  LEC rate:   7486.28 Hz
 *** DSSSD # 6 count:     52420 old count:     48302 dt:      3.43 s  LEC rate:  15276.82 Hz
 *** DSSSD # 1 count:        73 old count:        69 dt:      3.43 s  HEC rate:     21.27 Hz
 *** DSSSD # 2 count:       137 old count:       131 dt:      3.43 s  HEC rate:     39.93 Hz
 *** DSSSD # 3 count:       141 old count:       130 dt:      3.43 s  HEC rate:     41.09 Hz
 *** DSSSD # 4 count:       141 old count:       130 dt:      3.43 s  HEC rate:     41.09 Hz
 *** DSSSD # 5 count:        47 old count:        41 dt:      3.43 s  HEC rate:     13.70 Hz
 *** DSSSD # 6 count:         9 old count:         9 dt:      3.43 s  HEC rate:      2.62 Hz

23:20 Check online data ok (R1_642) see attachment 15

23:54  BigRips and BRIKEN stop their runs
       AIDA on file R1_652

*************June 1st********** 

00:03  BRIKEN start run 47
       BigRIPS start run 1058
       AIDA on file R1_654
   
       BigRIPS not sending synchronizing pulse

00:09  BigRIPS and BRIKEN stop their run

08:02 BRIKEN starts run 1032
      BigRIPS starts run 31
      AIDA on file R1_423

08:10 system wide checks all ok

08:28 Check ASIS all OK

08:40 Check Online data OK
      See Attachment 1, 2

08:57 BigRips and BRIKEN stop their runs
      AIDA on file R1_436

09:06 BRIKEN start run 32
      BigRIPS start run 1033
      AIDA on file R1_439

10:00 BigRips and BRIKEN stop their runs
      AIDA on file R1_452

10:01 BRIKEN start run 33
      BigRIPS start run 1034
      AIDA on file R1_453

10:07 FEE temperature OK - Attachment 3
      Bias and leakage current OK - attachment 4
      2d hit pattern (high energy) is Ok - attachment 5

10:37 We found that histogram was not enabled in some of the FEEs, data transfer is enable
      see attachment 6

11:04 BigRips and BRIKEN stop their runs
      AIDA on file R1_468

11.04 Enabled histogramming during BRIKEN run stop/start - all OK
      ttyUSB6 (nnaida2) system console monitor log attached - 8
     
11:06 BRIKEN start run 34
      BigRIPS start run 1035
      AIDA on file R1_470

12:00 BigRips and BRIKEN stop their runs
      AIDA on file R1_482

12:01 BRIKEN start run 35
      BigRIPS start run 1036
      AIDA on file R1_482

12:01 Good event statistics - attachment 7
      System wide checks all OK

12.24 DAQ continues OK
      FEE64 temperaturs - OK
      Statistics - OK
      No merger errors
      No nnaida panics
      HEC x vs y - attach 9

     Sorted first few seconds of R1_486
*** data items:    9080967 (  99245.54 Hz)
 *** ADC events:     940138 (  10274.73 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:    404906 old count:    378618 dt:      8.69 s  LEC rate:  46613.05 Hz
 *** DSSSD # 2 count:    536629 old count:    501262 dt:      8.69 s  LEC rate:  61777.09 Hz
 *** DSSSD # 3 count:    197174 old count:    183650 dt:      8.69 s  LEC rate:  22698.80 Hz
 *** DSSSD # 4 count:    177340 old count:    166370 dt:      8.69 s  LEC rate:  20415.50 Hz
 *** DSSSD # 5 count:     76292 old count:     71320 dt:      8.69 s  LEC rate:   8782.79 Hz
 *** DSSSD # 6 count:    138215 old count:    129356 dt:      8.69 s  LEC rate:  15911.40 Hz
 *** DSSSD # 1 count:       106 old count:       100 dt:      8.69 s  HEC rate:     12.20 Hz
 *** DSSSD # 2 count:       204 old count:       184 dt:      8.69 s  HEC rate:     23.48 Hz
 *** DSSSD # 3 count:       323 old count:       303 dt:      8.69 s  HEC rate:     37.18 Hz
 *** DSSSD # 4 count:       300 old count:       278 dt:      8.69 s  HEC rate:     34.54 Hz
 *** DSSSD # 5 count:       264 old count:       246 dt:      8.69 s  HEC rate:     30.39 Hz
 *** DSSSD # 6 count:       165 old count:       154 dt:      8.69 s  HEC rate:     18.99 Hz

     Cleared SortSas. Restarted online sorted.

12.57  Removed May2017/R34_* acquired during optimisation before start of RIBF127R1/R1 run


13:00 BigRips and BRIKEN stop their runs
      AIDA on file R1_496

13:04 BRIKEN start run 36
      BigRIPS start run 1037
      AIDA on file R1_498
      
      Cleared SortSas


13:23 Beam is off 
      BigRips and BRIKEN stop their runs
      AIDA on file R1_502

13:28 Beam is back
      BRIKEN start run 37
      BigRIPS start run 1038
      AIDA on file R1_503

13:30 Beam is off
      BRIKEN and BigRIPS DAQ are still running
      Current AIDA file R1_504
      
13:37 Beam is back     
      Current AIDA file R1_505

14:25 Crane activities in SAMURAI area (F12)

14:29 BigRips and BRIKEN stop their runs
      AIDA on file R1_518

14:33 BRIKEN start run 38
      BigRIPS start run 1039
      AIDA on file R1_519
      Clear midas sort histogram, x versus y hit pattern (HEC) OK

14:38 Crane activities ends
      
14:53 Bias and leakage current OK - attachment 10
      FEE64 temperature - OK
      Statistics - OK
      No Merger errors
      System wide check all OK

15:34 BigRips and BRIKEN stop their runs
      AIDA on file R1_534

15:36 BRIKEN start run 39
      BigRIPS start run 1040
      AIDA on file R1_534

      Clear midas sort histogram, x versus y hit pattern (HEC) OK
      FEE64 temperature - OK
      Statistics - OK
      No Merger errors
      System wide check all OK
      
*** DSSSD # 1 count:  38468714 old count:  38464614 dt:      1.15 s  LEC rate:   3573.31 Hz
 *** DSSSD # 2 count:  51643619 old count:  51638011 dt:      1.15 s  LEC rate:   4887.59 Hz
 *** DSSSD # 3 count:  19411426 old count:  19409561 dt:      1.15 s  LEC rate:   1625.42 Hz
 *** DSSSD # 4 count:  16930225 old count:  16928509 dt:      1.15 s  LEC rate:   1495.56 Hz
 *** DSSSD # 5 count:   7224866 old count:   7223934 dt:      1.15 s  LEC rate:    812.27 Hz
 *** DSSSD # 6 count:  13083942 old count:  13082308 dt:      1.15 s  LEC rate:   1424.09 Hz
 *** DSSSD # 1 count:     10122 old count:     10119 dt:      1.15 s  HEC rate:      2.61 Hz
 *** DSSSD # 2 count:     22934 old count:     22930 dt:      1.15 s  HEC rate:      3.49 Hz
 *** DSSSD # 3 count:     30932 old count:     30928 dt:      1.15 s  HEC rate:      3.49 Hz
 *** DSSSD # 4 count:     28790 old count:     28787 dt:      1.15 s  HEC rate:      2.61 Hz
 *** DSSSD # 5 count:     27032 old count:     27032 dt:      1.15 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:     16926 old count:     16926 dt:      1.15 s  HEC rate:      0.00 Hz

      

00:05 BigRIPS and BRIKEN stop their daqs
      AIDA currently on file R1_312

00:06 BRIKEN start run 23
      BigRIPS start run 1024
      AIDA on file R1_312
     
      System wide checks all ok

01:05 BigRIPS and BRIKEN stop their daqs
      AIDA on file R1_327

01:06 BigRips Start run 1025
      BRIKEN start run 24
      AIDA file R1_327

      System wide checks all ok

02:02 BigRIPS and BRIKEN stop their daqs
      AIDA on file R1_341
      ASIC load check ok

02:03 BigRIPS start run 1026
      BRIKEN start run 25
      AIDA ON FILE R1_341

02:11 System wide checks all ok
      Leakages and bias ok (Leakages rising again though) - attachment 1
      FEE temperatures ok - attachment 2
      Good event statistics - attachment 3
      Merger and tape server still running - attachment 4

02:23 Beam is off. Will recover soon

02:26 Beam is back

02:27 beam stopped again

02:28 beam back

02:37 Since beam has come back we appear to have lost all implant channels.
      only seeing events in DSSD2 

03:30 ASIC load issue resolved. AIDA data should be good from R1_353

      Beam continues to turn off and on

03:52 Since ~2am beam has been passing through the dssd
      Implantation spectrum - attachment 5
      Upon investigation the fixed degrader had fallen on the left and was at a 30 degree angle.
      It has now been put back in position
      AIDA file when fixed R1_360
      BRIKEN reset the timestamp
      Whilst sorting the ASIC issue bigRips moved onto run 1029
      BRIKEN run 1028. Full details in their elog

03:55 briken and bigRIPS stop runs
      bigRIPS start run 1028
      BRIKEN run 27
      AIDA file R1_360

04:29 Implant hit spectra after the degrader was replaced - attachment 6

04:58 BigRIPS and BRIKEN stop daqs
      AIDA on file R1_376

04:59 BigRIPS starts file 1029
      BRIKEN starts run 28
      AIDA at very end of file R1_376

05:20 System wide checks ok
      bias and leakage currents ok - attachment 7

05:26 Beam still dropping out for short moments of time

06:03 BigRips and BRIKEN stop their runs
      AIDA on file R1_393

06:04 BRIKEN start run 29
      BigRIPS start run 1030
      AIDA on file R1_393

06:28 Beam lost

06:31 Beam returned

06:46 System wide checks ok
      FEE temperatures ok - attachment 8

07:01 BigRIPS and BRIKEN stop their runs
      AIDA on file R1_407

07:02 BRIKEN start run 30
      BigRips run 1031
      AIDA on file R1_407

07:31 system wide checks all ok

07:48 Bias and leakage currents ok - attachment 9

08:01 Briken and BIgRips End current runs
      AIDA file R1_422 E silicon detector has saturation problem (see the attachment). We lower the
gain in round factor of 2. 

16.00   Still no beam  
        Current run /RIBF127R1/R1_197
        Found dropped channels on nnaida1, ASIC4 - see attach 1
        Check ASIC control x2
        No effects
        
17.08   FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok
        merger and tapeserver ok

        still no beam

17.20   Beam is back

        AIDA RIBF127R1/R1_216
        DAQ start BRIKEN 16
        DAQ start BigRIPS 1016

17.25   Almost all implants in DSSSD#6 - see attach 2
        Beam stopped on AIDA run RIBF127R1/R1_217
        Increasing degrader thickness.

17.30   New degrader: 11m Al plate
        Zero'd all histograms
        Deleted online SortSas

        AIDA RIBF127R1/R1_21
        DAQ start BRIKEN 17
        DAQ start BigRIPS 1017

17.44   Most implants still in #5,6. Adjusted degrader: 14mm Al
        
        Implants now in dets #4,5 preferentially.
        Zero'd all histograms
        Deleted online SortSas

        AIDA RIBF127R1/R1_221
        DAQ continues running in BRIKEN 17
        DAQ start BigRIPS 1018    
       
18.05   Beam lost on AIDA run RIBF127R1/R1_226

18.35   Beam is back

        Zero'd all histograms
        Deleted online SortSas
        
        AIDA RIBF127R1/R1_233
        DAQ start BRIKEN 18
        DAQ start BigRIPS 1019 

19:10   DSSD Rates from R1_239
 *** DSSSD # 1 count:    164076 old count:    109857 dt:      1.02 s  LEC rate:  53189.47 Hz
 *** DSSSD # 2 count:    211989 old count:    140492 dt:      1.02 s  LEC rate:  70139.39 Hz
 *** DSSSD # 3 count:     76697 old count:     49676 dt:      1.02 s  LEC rate:  26507.92 Hz
 *** DSSSD # 4 count:     72050 old count:     47860 dt:      1.02 s  LEC rate:  23730.67 Hz
 *** DSSSD # 5 count:     27482 old count:     17785 dt:      1.02 s  LEC rate:   9512.87 Hz
 *** DSSSD # 6 count:     51983 old count:     34674 dt:      1.02 s  LEC rate:  16980.33 Hz
 *** DSSSD # 1 count:        37 old count:        21 dt:      1.02 s  HEC rate:     15.70 Hz
 *** DSSSD # 2 count:        89 old count:        59 dt:      1.02 s  HEC rate:     29.43 Hz
 *** DSSSD # 3 count:       124 old count:        83 dt:      1.02 s  HEC rate:     40.22 Hz
 *** DSSSD # 4 count:       104 old count:        66 dt:      1.02 s  HEC rate:     37.28 Hz
 *** DSSSD # 5 count:        75 old count:        47 dt:      1.02 s  HEC rate:     27.47 Hz
 *** DSSSD # 6 count:        45 old count:        33 dt:      1.02 s  HEC rate:     11.77 Hz

19:23   FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok see attachment 4
        merger and tapeserver ok
        current AIDA file R1_244
   
20:01   BigRIPS and BRIKEN stopping the run
        AIDA RIBF127R1/R1_253

20:08   BigRIPS and BRIKEN start
        DAQ start BRIKEN 19
        DAQ start BigRIPS 1020
        AIDA RIBF127R1/R1_254

20:19  FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok see attachment 5
        merger and tapeserver ok
        current AIDA file R1_258

20.51   Beam and DAQ continue OK
        HEC x vs. y look OK - see attach 6  

21:03   BigRIPS and BRIKEN stopping the run
        AIDA RIBF127R1/R1_268

21.05   Beam lost while changing runs

21.07   Beam is back.
        DAQ start BRIKEN 20
        DAQ start BigRIPS 1021
        AIDA RIBF127R1/R1_270

22:01   FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok
        merger and tapeserver ok
        current AIDA file R1_282

22:02   BigRIPS and BRIKEN stopping the run
        AIDA RIBF127R1/R1_282

22:03   BigRIPS and BRIKEN start
        DAQ start BRIKEN 21
        DAQ start BigRIPS 1022
        AIDA RIBF127R1/R1_283

23:02   BigRIPS and BRIKEN stopping the run
        AIDA RIBF127R1/R1_296

23:04   BigRIPS and BRIKEN start
        DAQ start BRIKEN 22
        DAQ start BigRIPS 1023
        AIDA RIBF127R1/R1_297

23:40   FEE's temperature normal
        statistics normal
        system wide checks ok 
        leakage current and bias ok see attchment 7
        merger and tapeserver ok
        current AIDA file R1_306

08.58 DAQ continues OK 
      File RIBF127R1/R1_99
      BigRIPS run 1009
      BRIKEN run 9

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

08.59 *online* analysis - ADC & disc data synchronised - see attachment 1
      analysis of R1_99 OK - see attachment 2 - deadtime <0.5%

09.11 BigRIPS & BRIKEN DAQ stop

      
09.13 AIDA RIBF127R1/R1_103
      BRIKEN 10
      BigRIPS 1010

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - in
           1mm Al - out

09.30 Detector biases; leakage currents OK - see attachments 3 & 4
      FEE64 Temperatures OK - see attachment 5
      good events; statistics OK - see attachment 6
      No warnings/errors reported by merger since DAQ GO - see attachment 7

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

09.50 layout 1-8 spectra - see attachments 8-17
      Note pulser amplitude drifting for + polarity

      *all* spectra zero'd

10.00 BigRIPS & BRIKEN DAQ stop
      AIDA RIBF127R1/R1_114

      Check ASIC control x2

10.03 AIDA RIBF127R1/R1_115
      DAQ start BRIKEN 11
      DAQ start BigRIPS 1011

11.12 Changing degraders (16 mm Al plate check?)
      E17/F11 ambient temperature +24.7 deg C, RH 38.7%, d.p. +9.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)
      HEC plot attached - see attach 8 

11.17 AIDA RIBF127R1/R1_132
      DAQ start BRIKEN 12
      DAQ start BigRIPS 1012
      Attempted to start new run. Lost beam. BigRIPS re-optimising

11.40 Found beam

      Zero'd all histograms 
      Cleared online sorting histograms

      AIDA RIBF127R1/R1_139
      DAQ start BRIKEN 13
      DAQ start BigRIPS 1013

12.14 Machine is down on AIDA run RIBF127R1/R1_145
      HEC plot attached - see attach 9
      Implants moved one detector upstream

12.24 Check ASIC Control x2

12.30 Beam back
      
12.31 AIDA RIBF127R1/R1_149
      DAQ start BRIKEN 14
      DAQ start BigRIPS 1014

12.35 Detector biases; leakage currents OK - see attachments 22 & 23
      *online* analysis - ADC & disc data synchronised
      analysis of R1_149 OK - see attachment 24 - deadtime <0.5%

12.39 Beam off RIBF127R1/R1_151
      SRC cooling issues

13.55 Background run
      AIDA RIBF127R1/R1_170
      DAQ start BRIKEN 15, BigRIPS 1015

14.01 Beam still off

14.20 Stop background run
      AIDA RIBF127R1/R1_175

15.30 Beam still off
      DAQ continues OK
      FEE64 temperatures OK - attach 24
      Statistics OK - attach 25
      Leakage currents OK - attach 26
      No merger errors. No nnaida panics from USB console terminal.

      

00:02 Bias and leakage currents ok - attachment one
      System wide check all ok
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      ASIC load check all ok
      Merger still running ok - attachment 4

00:15 Current AIDA file R34_126

00:24 Pb Wall is removed
      Variable degraders in place Current configuration
           1mm Al - Out
           1mm Al - Out
           1mm Al - Out

      Fixed Degrader in place 11m Al (8mm +3mm Plates)

00:40 Variable degraders were out of alignment.
      Have now been realigned.

01:06 Fixed degrader moved closer to F11 plastic.
      Moved from far side of Pb wall to side closest to F11 plastic.
      Fixed degrader thickness increased to 13mm Al (8mm + 3mm + 2mm plates)

      Current degrader configuration:

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - Out
           1mm Al - Out
           1mm Al - Out

01:36 Implant hit pattern for current Ni setting - attachment 5
      Looks as if we have a broken bond wire in DSSD6 FEE 8 (Missing horizontal band)
      Also maybe one in DSSD3 FEE 14 (Missing vertical band)

01:54 Degraders changed
      Current degrader configuration:

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - in
           1mm Al - in
      Implant Hit spectra - attachment 6

01:59 Degraders changed
      Current degrader configuration:

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - out
           1mm Al - out
      Implant Hit spectra - attachment 7

02:08 Start AIDA file R1_0 in directory RIBF127R1
      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      Current degrader configuration:

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - out
           1mm Al - out
      
02:11 Bias and leakages all ok - attachment 8#

02:26 Briken and BigRIPS start new runs
      Briken run 3
      BigRIPS run 1003
      Current AIDA file R1_4

02:42 MIDAS sort crashed, restarted and sorted R1_7 to get the implant rates:
 *** DSSSD # 1 count:    428279 old count:    369602 dt:      1.02 s  LEC rate:  57547.23 Hz
 *** DSSSD # 2 count:    523171 old count:    452321 dt:      1.02 s  LEC rate:  69485.85 Hz
 *** DSSSD # 3 count:    194416 old count:    168097 dt:      1.02 s  LEC rate:  25812.25 Hz
 *** DSSSD # 4 count:    181257 old count:    156583 dt:      1.02 s  LEC rate:  24198.93 Hz
 *** DSSSD # 5 count:     73675 old count:     63323 dt:      1.02 s  LEC rate:  10152.68 Hz
 *** DSSSD # 6 count:    130418 old count:    112563 dt:      1.02 s  LEC rate:  17511.22 Hz
 *** DSSSD # 1 count:        63 old count:        54 dt:      1.02 s  HEC rate:      8.83 Hz
 *** DSSSD # 2 count:       156 old count:       133 dt:      1.02 s  HEC rate:     22.56 Hz
 *** DSSSD # 3 count:       199 old count:       178 dt:      1.02 s  HEC rate:     20.60 Hz
 *** DSSSD # 4 count:       196 old count:       174 dt:      1.02 s  HEC rate:     21.58 Hz
 *** DSSSD # 5 count:       180 old count:       152 dt:      1.02 s  HEC rate:     27.46 Hz
 *** DSSSD # 6 count:        87 old count:        75 dt:      1.02 s  HEC rate:     11.77 Hz

02:59 BigRIPS and BRIKEN stopping the run
      Ni being implanted into detector 6 so will be increasing degrader
      AIDA current run R1_13

      Current degrader configuration:

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - in
           1mm Al - out

03:03 BRIKEN start run 4
      BigRIPS start run 1004

03:16 Bias and leakage currents ok - attachment 9
      System wide checks all ok

03:23 Sorted file R1_16 - Current rates are:
 *** DSSSD # 1 count:    191573 old count:    124591 dt:      1.04 s  LEC rate:  64370.77 Hz
 *** DSSSD # 2 count:    232369 old count:    148461 dt:      1.04 s  LEC rate:  80636.92 Hz
 *** DSSSD # 3 count:     84277 old count:     53763 dt:      1.04 s  LEC rate:  29324.44 Hz
 *** DSSSD # 4 count:     78592 old count:     51020 dt:      1.04 s  LEC rate:  26497.13 Hz
 *** DSSSD # 5 count:     30254 old count:     19685 dt:      1.04 s  LEC rate:  10156.98 Hz
 *** DSSSD # 6 count:     55682 old count:     36607 dt:      1.04 s  LEC rate:  18331.38 Hz
 *** DSSSD # 1 count:        55 old count:        33 dt:      1.04 s  HEC rate:     21.14 Hz
 *** DSSSD # 2 count:       103 old count:        60 dt:      1.04 s  HEC rate:     41.32 Hz
 *** DSSSD # 3 count:        77 old count:        47 dt:      1.04 s  HEC rate:     28.83 Hz
 *** DSSSD # 4 count:        72 old count:        45 dt:      1.04 s  HEC rate:     25.95 Hz
 *** DSSSD # 5 count:        29 old count:        20 dt:      1.04 s  HEC rate:      8.65 Hz
 *** DSSSD # 6 count:         4 old count:         3 dt:      1.04 s  HEC rate:      0.96 Hz

04:01 BigRIPS and BRIKEN finish their runs
      AIDA run R1_28

04:04 BigRIPS run 1005
      BRIKEN run 5
      AIDA file R1_28

04:28 System wide checks all ok
      FEE temperatures ok

04:48 Implant hit spectra for the current degrader settings - attachment 10
      Current degrader configuration:

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - in
           1mm Al - out

05:00 BigRIPS and BRIKEN stop their runs
      Current AIDA file R1_42

      ASIC load check all ok

05:01 BigRips starts run 1006
      BRIKEN run 6
      AIDA file R1_42

05:03 System wide checks all ok
      FEE temps ok - attachment 11
      Good Events - attachment 12
      leakages and bias ok - attachment 13

05:37 No beam

05:40 beam back (Interlock error caused beam to be lost)

05:59 Appears to be a broken wire in DSSD2 FEE2

06:00 BigRIPS and BRIKEN stopped their runs
      AIDA currently on file R1_56

06:02 BigRIPS starts run 1007
      BRIKEN starts run 7
      AIDA currently on file R1_57

06:06 System wide checks all ok
      FEE temperatures all ok

06:27 Leakage currents still rising but within acceptable range at the moment - attachment 14

06:48 Rates from R1_67
 *** DSSSD # 1 count:    229047 old count:    159366 dt:      1.02 s  LEC rate:  68643.03 Hz
 *** DSSSD # 2 count:    275255 old count:    189329 dt:      1.02 s  LEC rate:  84646.04 Hz
 *** DSSSD # 3 count:    102832 old count:     70928 dt:      1.02 s  LEC rate:  31428.76 Hz
 *** DSSSD # 4 count:     93609 old count:     66189 dt:      1.02 s  LEC rate:  27011.55 Hz
 *** DSSSD # 5 count:     37256 old count:     26588 dt:      1.02 s  LEC rate:  10509.09 Hz
 *** DSSSD # 6 count:     69611 old count:     50443 dt:      1.02 s  LEC rate:  18882.47 Hz
 *** DSSSD # 1 count:        84 old count:        61 dt:      1.02 s  HEC rate:     22.66 Hz
 *** DSSSD # 2 count:       132 old count:       106 dt:      1.02 s  HEC rate:     25.61 Hz
 *** DSSSD # 3 count:       105 old count:        77 dt:      1.02 s  HEC rate:     27.58 Hz
 *** DSSSD # 4 count:       102 old count:        76 dt:      1.02 s  HEC rate:     25.61 Hz
 *** DSSSD # 5 count:        44 old count:        32 dt:      1.02 s  HEC rate:     11.82 Hz
 *** DSSSD # 6 count:         8 old count:         5 dt:      1.02 s  HEC rate:      2.96 Hz

07:00 BigRips and BRIKEN stop their daqs
      AIDA currently on file R1_71
      ASIC load check all ok

07:02 BigRIPS and BRIKEN start
      BigRIPS run 1008
      BRIKEN  run 8
      
      System wide checks all ok
      AIDA    run R1_71

07:30 Bias and leakage currents ok - attachment 15
      Leakage currents decreasing again

07:37 Rates from R1_79
 *** DSSSD # 1 count:    168930 old count:    115510 dt:      1.04 s  LEC rate:  51415.14 Hz
 *** DSSSD # 2 count:    203546 old count:    141908 dt:      1.04 s  LEC rate:  59324.72 Hz
 *** DSSSD # 3 count:     74562 old count:     52397 dt:      1.04 s  LEC rate:  21333.14 Hz
 *** DSSSD # 4 count:     70487 old count:     47585 dt:      1.04 s  LEC rate:  22042.48 Hz
 *** DSSSD # 5 count:     26901 old count:     18574 dt:      1.04 s  LEC rate:   8014.49 Hz
 *** DSSSD # 6 count:     51567 old count:     34847 dt:      1.04 s  LEC rate:  16092.50 Hz
 *** DSSSD # 1 count:        56 old count:        34 dt:      1.04 s  HEC rate:     21.17 Hz
 *** DSSSD # 2 count:        84 old count:        51 dt:      1.04 s  HEC rate:     31.76 Hz
 *** DSSSD # 3 count:        83 old count:        52 dt:      1.04 s  HEC rate:     29.84 Hz
 *** DSSSD # 4 count:        85 old count:        50 dt:      1.04 s  HEC rate:     33.69 Hz
 *** DSSSD # 5 count:        27 old count:        16 dt:      1.04 s  HEC rate:     10.59 Hz
 *** DSSSD # 6 count:         9 old count:         8 dt:      1.04 s  HEC rate:      0.96 Hz

08:00 BigRIPS and BRIKEN stop their daqs
      AIDA file R1_85

08:02 BigRIPS and BRIKEN start DAQs
      BigRIPS run 1009
      BRIKEN run 9
      AIDA file R1_86

08:06 System wide checks all ok
      FEE temperatures ok

08:19 Bias and leakages ok - attachment 16

Overnight and earlier today Obtained the following Merger error messages

Merge: Attempting resynchronisation to timestamp 26c3b4700056 or greater
Merge: Last sync pulse time: 26c3b46c00a0
Merge: Last timestamp seen: 26c3b4700055
Merge: Restarting at timestamp 26c3b47000a0
Merge: Timestamp (26c8062c00a0)[Q 5, Stream 5] is older than previous (26c8162bf81d) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26c8162bf81e or greater
Merge: Last sync pulse time: 26c8162800a0
Merge: Last timestamp seen: 26c8162bf81d
Merge: Restarting at timestamp 26c8162c00a0
Merge: Timestamp (26caa2109e35)[Q 5, Stream 5] is older than previous (26cab11e8415) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26cab11e8416 or greater
Merge: Last sync pulse time: 26cab11c00a0
Merge: Last timestamp seen: 26cab11e8415
Merge: Restarting at timestamp 26cab12000a0
Merge: Timestamp (26cbfe8400a0)[Q 5, Stream 5] is older than previous (26cc0e83f4e5) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26cc0e83f4e6 or greater
Merge: Last sync pulse time: 26cc0e8000a0
Merge: Last timestamp seen: 26cc0e83f4e5
Merge: Restarting at timestamp 26cc0e8400a0
Merge: Timestamp (26cf059000a0)[Q 5, Stream 5] is older than previous (26cf158ffb05) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26cf158ffb06 or greater
Merge: Last sync pulse time: 26cf158c00a0
Merge: Last timestamp seen: 26cf158ffb05
Merge: Restarting at timestamp 26cf159000a0
Merge: Timestamp (26cf899c00a0)[Q 5, Stream 5] is older than previous (26cf999bf9ad) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26cf999bf9ae or greater
Merge: Last sync pulse time: 26cf999800a0
Merge: Last timestamp seen: 26cf999bf9ad
Merge: Restarting at timestamp 26cf999c00a0
Merge: Timestamp (26dc07cac965)[Q 5, Stream 5] is older than previous (26dc16e6255d) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26dc16e6255e or greater
Merge: Last sync pulse time: 26dc16e400a0
Merge: Last timestamp seen: 26dc16e6255d
Merge: Restarting at timestamp 26dc16e800a0
Merge: Timestamp (26e035dac9cd)[Q 5, Stream 5] is older than previous (26e043cef5cd) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26e043cef5ce or greater
Merge: Last sync pulse time: 26e043cc00a0
Merge: Last timestamp seen: 26e043cef5cd
Merge: Restarting at timestamp 26e043d000a0
Merge: Timestamp (26e20f9000a0)[Q 5, Stream 5] is older than previous (26e21f8ffbdd) [Q 5, Stream 5]
Merge: Attempting resynchronisation to timestamp 26e21f8ffbde or greater
Merge: Last sync pulse time: 26e21f8c00a0
Merge: Last timestamp seen: 26e21f8ffbdd
Merge: Restarting at timestamp 26e21f9000a0
Merge: Timestamp (26e2817000a0)[Q 5, Stream 5] is older than previous (26e2916ffd25) [Q 5, Stream 5]

 :
 :
 :

This afternoon obtained the following error messages

MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Program (23229): check_for_data: index 6, unexpected header sequence number in pending data, found
787625409, last 27437
MERGE Program (23229): check_for_data: index 7, unexpected header sequence number in pending data, found
1814152641, last 82834
MERGE Data Link (23172): Received SEGV signal; exiting.
MERGE Server: Received signal 17.

Analysis of final two files of R33 - see attachments 1 & 2
Note idle time >> dead time (defined by PAUSE/RESUME) for nnaida5

Offline analysis R33_52 confirms ADC & disc data are synchronised - see attachments 3 & 4

aidas1> df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_aidas1-lv_root
                       50G   42G  4.7G  91% /
tmpfs                 3.9G  1.1G  2.9G  27% /dev/shm
/dev/sda1             477M   77M  376M  17% /boot
/dev/mapper/vg_aidas1-lv_home
                      860G  580G  236G  72% /home
/dev/mapper/Data1-data10
                      7.7T  6.6T  763G  90% /data10
/dev/sdg2             7.3T  7.1T  190G  98% /ntfs
aidas1> ls /ntfs
Autorun.inf     Mar2017  NP1306    Seagate             Warranty.pdf
BackupPlus.ico  May2015  NP1512    Sept2016
Dec2016         May2016  PE16      Start_Here_Mac.app
Feb2015         Nov2016  RIBF03R1  Start_Here_Win.exe
aidas1> cd /ntfs
/ntfs
aidas1> du -h
22G	./Dec2016
41G	./Feb2015
14G	./Mar2017
123G	./May2015
7.9G	./May2016
97G	./Nov2016
1.1T	./NP1306
1.6T	./NP1512
1.7T	./PE16
101G	./RIBF03R1/BigRIPS
2.2M	./RIBF03R1/BRIKEN/1622FallonPreparation/CheckCal_161122_2208_003
25K	./RIBF03R1/BRIKEN/1622FallonPreparation/CheckCal_161124_1215
8.2G	./RIBF03R1/BRIKEN/1622FallonPreparation
500K	./RIBF03R1/BRIKEN/1626FallonParasitic/Conf
120K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id204_id184/ELOG_RIBF123_id204_id184_files
164K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id204_id184
788K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id224_id205/ELOG_RIBF123_id224_id204_files
844K	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123/elog_RIBF123_id224_id205
19M	./RIBF03R1/BRIKEN/1626FallonParasitic/Elogs_RIBF123
313M	./RIBF03R1/BRIKEN/1626FallonParasitic/FallonOnlines
187G	./RIBF03R1/BRIKEN/1626FallonParasitic
28K	./RIBF03R1/BRIKEN/BRIKENrootTools
195G	./RIBF03R1/BRIKEN
71M	./RIBF03R1/RIBF03R1_logs
2.5T	./RIBF03R1
512	./Seagate/Registration
512	./Seagate
115G	./Sept2016
0	./Start_Here_Mac.app/Contents/Frameworks
26M	./Start_Here_Mac.app/Contents/MacOS
304K	./Start_Here_Mac.app/Contents/Resources
4.0K	./Start_Here_Mac.app/Contents/_CodeSignature
26M	./Start_Here_Mac.app/Contents
26M	./Start_Here_Mac.app
7.1T	.
aidas1> 

09.00 DAQ continues OK 
      Current file May2017/R32_239

      Detector biases; leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events; statistics OK - see attachment 4
      Some error messages reported by merger yesterday but none overnight - see attachment 5

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status =6)

09.33 E17/F11 ambient temperature +24.0 deg C, RH 38.0%, d.p. +8.8 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

09.35 Analysis of R32_259 - OK see attachment 6

10.50 Offline analysis R32_277 - ADC & disc data synchronised - see attachments 7-9

11.00 DAQ stop OK 
      File May2017/R32_280

      Check ASIC control x2
      Zero all spectra

11.05 DAQ go
      File May2017/R33

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0x20

15.00 Merger crashed (SEGV) - see https://elog.ph.ed.ac.uk/AIDA/607

      DAQ stop
      Restart Merger
      DAQ stop OK following transient nnaida1 timeout

      Close merger/tapeserver browser, kill httpd for merger/tapeserver,merger and tapeserver terminal server
sessions
      Disable histogramming and data transfer #1
      DAQ reset, setup
      Restart merger and tapeserver
      Enable histogramming and data transfer #1

      *all* system wide checks OK *except* nnaida1 & nnaida21 fail ADC calibration, nnaida1 clock status=6

15.18 DAQ start
      File May2017/R34

15.25 no merger error messages
      nnaida1 & nnaida2 good events high - ~100k and ~120k respectively - see attachment 10

16.24 removed R32
      System wide checks - ASIC clock timestamp test fails on all nnaidas. Synchronised clocks. ASIC clock test
      passes.
      FEE temperatures, leakage currents - OK
      Merger reports 

      Merge: Restarting from timestamp 1 or greater
      Merge: Starting at timestamp 27d1e55c00a0
      Merge: Trying to add items to Q index 21 (Link 21) but queue already full

      Probably as a result of ADC clock synchronisation.

17:03 Used analyser on R34_23. No timewarps, negligible dead time. All other values as normal.

17.19 FEE64 temperatures, leakage currents - OK
      nnaida1 & nnaida 2 good events still high - ~100k roughly
      No further messages from merger

17.45 DAQ continues OK
      BRIKEN reports increased neutron and gamma activity. No apparent effect on AIDA rates.

18.50 DAQ continues OK
      FEE64 temperatures, leakage currents - OK
      No merger errors
      Used analyser on run R34_49 - no timewarps, rates as expected

19.30 BigRIPS optimisation ongoing. DAQ continues OK
      FEE64 temperatures, leakage currents - OK
      No merger error messages
      No panics from USB device monitor
      Used analyser on R34_58 - no timewarps, ADC data format ~ 1Mhz, other rates OK, 
                                highest dead time = ~2 s/254 s on nnaida 2 

20.00 BigRIPS optimisation ongoing. DAQ continues OK
      FEE64 temperatures, leakage currents - OK
      No merger error messages
      No panics from USB device monitor
      Used analyser on R34_63 - no timewarps, ADC data format ~ 1Mhz, other rates OK, 
                                highest dead time = ~1.3 s/255 s on nnaida 2 

20.15 BigRIPS reports beam optimisation may be over soon.
      DAQ continues OK.

20.47 BigRIPS optimisation ongoing. DAQ continues OK
      FEE64 temperatures, leakage currents - OK
      No merger error messages
      No panics from USB device monitor
      Used analyser on R34_76 - no timewarps, ADC data format ~ 1Mhz, other rates OK, 
                                highest dead time = ~1.1 s/255 s on nnaida 2 

21.49 BigRIPS optimisation ongoing. DAQ continues OK
      FEE64 temperatures, leakage currents - OK
      No merger error messages
      No panics from USB device monitor
      Used analyser on R34_90 - no timewarps, ADC data format ~ 1Mhz, other rates OK, 
                                highest dead time = ~2.0 s/258 s on nnaida 2 

23.05 BigRIPS optimisation ongoing. DAQ continues OK
      FEE64 temperatures, leakage currents - OK
      No merger error messages
      No panics from USB device monitor
      Used analyser on R34_109 - no timewarps, ADC data format ~ 1Mhz, other rates OK, 
                                highest dead time = ~1.9 s/256 s on nnaida 2 

ADC offset calculation using data from pulser walkthrough runs, see:
https://elog.ph.ed.ac.uk/AIDA/603

Attachment 1,2: excel and text file with tabulated ADC offset values.
Attachment 3,4: 2D histogram pulser amplitute vs channel number (with gain matching applied) for validating the
calculation.

Note: Channel with ADC offset=0 means ADC offset could not be calculated properly due to poor resolution/low
statistic

10.15 DAQ continues OK 
      Current file May2017/R31_239

      Detector biases; leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      good events; statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

10.30 E17/F11 ambient temperature +23.8 deg C, RH 40.9%, d.p. +9.6 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 95% - refilled)

10.35 Layouts 1, 3, 4, 7 and 8 - see attachments 6-13
      Note - as expected, zero HEC events, layouts 5 & 6 not shown

10.58 DAQ stop - transient timeout nnaida1 - followed by successful stop
      File May2017/R31_248

      Delete R31

11.12 Disable data transfer
      DAQ GO - transient timeout nnaida1 - followed by successful start 
      nnaida1 system console - see attachment 14

12:00 Moved plastic veto scintillator downstream in an attempt to reduce noise
      Rates in noisy FEEs reduced by 20-30%

14:30 DAQ continues OK
      Found that pulser induces counts in some HEC (nnaida20, 14 in particular). See attachment 15. Pulser off
removes these events completely.
      These events could be mistaken for implantation events during data acquisition.
      Increasing the fast comparator threshold HEC from 2 -> 3 suppresses the events. Increasing the threshold
to 4 does not appear to have further effects.
      Even with the increased threshold some HEC (e.g. 1.0H) still see the pulser. See attachment 16 (fast
comparator threshold HEC was 0x3).
      Checked data is synchronised in file R32_33

15:29 Set the threshold back to 2. We will perform this cut off-line in the analysis. 

13.38 DAQ continues OK 
      Current file May2017/R27_49

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)

10.30 E17/F11 ambient temperature +23.8 deg C, RH 40.9%, d.p. +9.6 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

13:40 Stopped DAQ running on alpha background calibration run
      Current file May2017/R49
      tyUSB7 log (nnaida1) attached

13:43 Detector bias OFF

14.16 DAQ starts
      File May2017/R28

      Pulser walkthrough

      BNC PB-4
      Amplitude 90,000-10,000 @ 10,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 250Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0x20

      See attachment 6

14.25 DAQ stop OK

14.27 DAQ starts
      File May2017/R29

      Pulser walkthrough

      BNC PB-4
      Amplitude 12,000-2,000 @ 2,000 step

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0x20

      See attachment 7

14.34 DAQ stop OK

14.38 DAQ starts
      File May2017/R30

      Background, pulser OFF

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0x20

15.16 DAQ stop OK
      May2017/R30_8

16:17 DAQ starts okay 
      current run May2017/R31_0
      leakage current and temperature fine
      see attachment 8 and 9


  

Observe same noise structures to https://elog.ph.ed.ac.uk/AIDA/600

Extended noisy periods ~few Hz compose of fine structure with period ~350us

10.20 DAQ continues OK 
      Current file May2017/R27_22

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)

10.30 E17/F11 ambient temperature +24.2 deg C, RH 39.7%, d.p. +9.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

      Left DAQ running on alpha background calibration run
      
      ttyUSB7 log (nnaida1) attached
      GUI got stuck while attempting to drag-and-drop ttyUSB7 to ELOG to upload. Terminal still working and
confirmed Merger working OK.
      Killed nautilus process to get GUI unstuck. Uploaded ttyUS7 via Browse -> Upload button on ELOG instead.

15.51 DAQ continues OK 
      Current file May2017/R27_28

      Detector biases; leakage currents OK - see attachment 6
      FEE64 Temperatures OK - see attachment 7
      good events; statistics OK - see attachment 8
      No warnings/errors reported by merger since DAQ GO - see attachment 9

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)

15.53 E17/F11 ambient temperature +24.1 deg C, RH 40.1%, d.p. +9.8 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

      Left DAQ running on alpha background calibration run
      
      ttyUSB7 log (nnaida1) attached

19.20 DAQ continues OK 
      Current file May2017/R27_31

      Detector biases; leakage currents OK - see attachment 11 & 12
      FEE64 Temperatures OK - see attachment 13
      good events; statistics OK - see attachment 14
      No warnings/errors reported by merger since DAQ GO - see attachment 15

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

19.30 E17/F11 ambient temperature +24.2 deg C, RH 38.5%, d.p. +9.2 deg C

Offline analysis of RIBF123R1_91 to R23_115

See https://elog.ph.ed.ac.uk/AIDA/583 & https://elog.ph.ed.ac.uk/AIDA/594

No evidence of ~1s oscillations but we do observe ~360us  oscillations in HEC-HEC, LEC-LEC and HEC-LEC times

Attachment 1 - per DSSSD HEC-HEC time 2.56us/channel - 387-246=141=361us

Attachments 2-4 - per DSSSD LEC-LEC time 2.56us/channel - 858-721=138=353us

Attachments 5-7 - per DSSSD HEC-LEC time 2.56us/channel - 699-567=132=338us

Note also 'random' spikes in s2200 DSSSD#1 HEC-LEC time. This may suggest an increase
in noise or fluctuations in noise level. 

Attachment 8 - per DSSSD m_p versus m_n - note additional feature in DSSSD#1 & #2 

Attachments 9-10 - per DSSSD HEC-LEC time 163.84us/channel - no ~1s oscillations

10.10 DAQ continues OK 
      Current file May2017/R26_17

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)
      

10.17 E17/F11 ambient temperature +24.2 deg C, RH 42.8%, d.p. +10.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)

      Lights on B2 partially off - Alvaro TD reports this may imply beam tests being carried out. He also
reports spike of gamma counts in BRIKEN clover around 10:00.

10.18 DAQ stops OK
      Current file May2017/R26_17

      Zeroed histograms. Background alpha calibration long run ongoing.

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0x20

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

10.25 DAQ stars OK
      Current file may2017/R27

      ttyUSB7 (nnaida1) attached

10.50 Measured AIDA ac mains voltage with DMM. Voltage 100.4V rms L-N
      FL11006 chiller refilled (2 litres added) 

17.05 DAQ continues OK 
      Current file May2017/R26_17

      Detector biases; leakage currents OK - see attachment 6,7
      FEE64 Temperatures OK - see attachment 8
      good events; statistics OK - see attachment 9
      No warnings/errors reported by merger since DAQ GO - see attachment 10

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)

17.07 E17/F11 ambient temperature +24.1 deg C, RH 39.8%, d.p. +9.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 95%)

      Left DAQ running on alpha background calibration run


      

I have tarred and zipped all 24 logs and shipped them back to the UK. Now I can browse through them.

Studying the "panics" :=

       nnaida17 has one which is an NFS mount failure.

       nnaida20 and 22 have one each which are "Starting midas:  Page fault in user mode with in_atomic() = 1 mm = c61bf200" but with different values for the mm=.

I am studying the web to understand why this may occur in a particular program. Both occur at similar places  after "Starting midas".

There are reports of "Clock not locked. status = 0xc" during Setup Electronics which is a bit unusual. These occur in nnaida4, 17 and 22.

Also   "Clock not locked. status = 0xd"  in nnaida23,17,3,19,6,5,14,7,9. Further investigation to understand all these.

The bit allocation of the Clock Status word is:- 

Bit 0 : Lock Detect bit from LMK03200 #1

Bit 1 : Lock Detect bit from LMK03200 #2

Bit 2 : Lock detect from the internal DCM for the mux clock.

Bit 3: iDelay ready signal

The LMK03200  are the two PLLs which are connected to the 50MHz input clock. The clock setup in the log directly before the error report for nnaiad17 had reported correctly setup and the ADCs had calibrated, these rely on a stable 50MHz from the LMK03200s.

I have also spotted some diagnostic information about the waveform readout that is useful.

Just a reminder..... when power cycling the equipment please leave the power off for at least 10 seconds to allow all the capacitors in the supply chain to discharge.

Also note that the console monitor window in the Pi can be used to check that all FEE64s have "finished" the power-on sequence by using the "parse" button.

Since it doesn't use the DAQ software it won't lock-up and it will give an indication of progress.

Álvaro Tolosa Delgado reports observation of c. 1s 'oscillations' in implant-decay time spectra - see below

Hello

The worst cases (oscillations in decay-curve) are:

-->R23_91_115

--> R25_142_149

Other bad cases:

--> R23_44_70

Cheers!

Check sample of data files - see attachments 1-3 - no obvious data structure issues but higher deadtime for
nnaida17 for R23_* files

Control check using file R25_12 - see attachment 4 

To install the 252Cf fission source to test the 3He neutron counters, Pb bricks which
had blocked the BRIKEN aperture have now been removed.

11.00 Merger found stopped at 03:27 - current file R24_7
      Restarted Merge. Stopped Run control. Run control stopped, got error message - see attachment 1
      nnaida 1-16 show error, nnaida 17-24 show stopped - see attachment 2
      No new panics in Raspberry Pi console monitor
      
13.10 Found FEE64 #1-16 power off - fuse failed in section #1 of USB-controlled ac mains relay - this fuse was
replaced yesterday

13.15 Closed file May2017/R24
      Closed DAQ, Merger & Tapeserver browsers & terminated terminal servers

13.22 Replaced 250V/16A/fast fuse *and* carrier in section #1 of USB-controlled ac mains relay - when fuse fails
there is some solder leaks from base of fuse into carrier 

13.25 Switch on relays # 1-8 at ~10s intervals
      Count 24 authenticated mount requests 13.26.02 to 13.27.30 - see attachment 5

13.31 E17/F11 ambient temperature +24.4 deg C, RH 40.0%, d.p. +9.9 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
      Detector biases & leakage currents OK - see attachments 3 & 4

13.39 Checked Pi-monitor - no further panics detected in FEE64 system logs

13.54 Turned on DAQ.
      FEE temperatures OK - see attach 6
      System wide checks ok *except* nnaida1 clock status (status 6) and nnaida1,7,8,9,13,21,24
      Manually recalibrated all *except* nnaida21

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0x20

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Current file R26

      ttyUSB0 attached - 7

14.04 good events statistics - see attachment 8

11.02 DAQ continues OK 
      Current file May2017/R22_192

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida7, 9, 13, 22

11.05 E17/F11 ambient temperature +23.9 deg C, RH 41.3%, d.p. +10.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)
      Voltage on BRIKEN 3He tubes now ON

11.07 DAQ stops OK
      Current file May2017/R22_193
      Deleted R22*

      Loaded new firmware to test ADC calibration clock issues - attachment 6
      Firmware loaded - attachment 7
      Restarted Firefox - temperatures still look fine - see attachment 7
      System wide checks - nnaida1 clock failed, other clocks OK - attachment 8
                           ADC calibration failed for nnaida1, 3, 21 - attachment 9
                           Other system wide checks OK
      Statistics - few SYNC pulses received by nnaida 9 and 12. See attachement 10


      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

13.10 DAQ started
      File May2017/R23
      Run Control GO - Tape server GO - Merger Unpause - Merger data rate 0, but Tapeserver sees events and
Merger links are green - see attachment 11
      Start ASIC data readout - Merger sees data rate of ~800 000 items/s (OK!)
      FPGA clock monitor page (http://localhost:8015/AIDA/MONLOCK/MONLOCK.tml) screenshot attached (12)

      Ras Pi system console logs for USB0 attached - see attachment 13

18.00 Merger found stopped. We were unable to stop the DAQ. Powered off FEEs. Power on, only eight were supplied
power. 
      Blown fuse in USB bias controller - replaced.
      Power ON the FEEs. All 24 FEEs mounted.
       
      Current file May2017/R23_27 - stopped at 15:27

18.31 nnaida20 rebooted on its own
      
      
18.37 E17/F11 ambient temperature +23.7 deg C, RH 39.8%, d.p. +9.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)

18.41 Restarted DAQ 
      
      Detector biases; leakage currents OK - see attachment 14
      System wide checks - OK *except* several modules failed ADC calibration - see attachment 15
      FPGA clock monitor screenshot attached (16)

18.51 Stopped DAQ. Flashed previous firmware on FEEs (FEE_GF_Feb16_24.bin)
      Power cycled. All 24 modules mounted OK.
      nnaida22 rebooted on its own
      Time out Setting up the DAQ on nnaida2 and others. Power cycled again.
      nnaida17 rebooted on its own.
      Time out Setting up the DAQ on nnaida1. Power cycled again.
      
19.56 DAQ finally started.
      Current run R24

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0x20

      *all* system wide checks OK *except* some ADC calibrations and clock on nnaida1
      Temperatures OK
      Statistics OK
      
      Logs for nnaida 17,20,22 attached

      

ttyUSB0 =>  last host=nnaida24, => last addr=10.1.2.24, ; #panics => 0 ; Not Finished 
ttyUSB1 =>  last host=nnaida23, => last addr=10.1.2.23, ; #panics => 0 ; Not Finished 
ttyUSB10 =>  last host=nnaida18, => last addr=10.1.1.18, ; #panics => 0 ; Not Finished 
ttyUSB11 =>  last host=nnaida17, => last addr=10.1.1.17, ; #panics => 0 ; Not Finished 
ttyUSB12 =>  last host=nnaida4, => last addr=10.1.2.4, ; #panics => 0 ; Not Finished 
ttyUSB13 =>  last host=nnaida3, => last addr=10.1.2.3, ; #panics => 0 ; Not Finished 
ttyUSB14 =>  last host=nnaida12, => last addr=10.1.2.12, ; #panics => 0 ; Not Finished 
ttyUSB15 =>  last host=nnaida11, => last addr=10.1.2.11, ; #panics => 0 ; Not Finished 
ttyUSB16 =>  last host=nnaida20, => last addr=10.1.2.20, ; #panics => 0 ; Not Finished 
ttyUSB17 =>  last host=nnaida19, => last addr=10.1.2.19, ; #panics => 0 ; Not Finished 
ttyUSB18 =>  last host=nnaida6, => last addr=10.1.1.6, ; #panics => 0 ; Not Finished 
ttyUSB19 =>  last host=nnaida5, => last addr=10.1.1.5, ; #panics => 0 ; Not Finished 
ttyUSB2 =>  last host=nnaida16, => last addr=10.1.2.16, ; #panics => 0 ; Not Finished 
ttyUSB20 =>  last host=nnaida14, => last addr=10.1.1.14, ; #panics => 0 ; Not Finished 
ttyUSB21 =>  last host=nnaida13, => last addr=10.1.1.13, ; #panics => 0 ; Not Finished 
ttyUSB22 =>  last host=nnaida22, => last addr=10.1.1.22, ; #panics => 0 ; Not Finished 
ttyUSB23 =>  last host=nnaida21, => last addr=10.1.1.21, ; #panics => 0 ; Not Finished 
ttyUSB3 =>  last host=nnaida15, => last addr=10.1.2.15, ; #panics => 0 ; Not Finished 
ttyUSB4 =>  last host=nnaida8, => last addr=10.1.2.8, ; #panics => 0 ; Not Finished 
ttyUSB5 =>  last host=nnaida7, => last addr=10.1.2.7, ; #panics => 0 ; Not Finished 
ttyUSB6 =>  last host=nnaida2, => last addr=10.1.1.2, ; #panics => 0 ; Not Finished 
ttyUSB7 =>  last host=nnaida1, => last addr=10.1.1.1, ; #panics => 0 ; Not Finished 
ttyUSB8 =>  last host=nnaida10, => last addr=10.1.1.10, ; #panics => 0 ; Not Finished 
ttyUSB9 =>  last host=nnaida9, => last addr=10.1.1.9, ; #panics => 0 ; Not Finished 

Please attach the list of ttyUSB to FEE64 console connection .

I have noticed from the console logs reports concerning an inability to open the Options CONTENTS files for the FEE64s and hence failure to load the Options.

I have checked with similar files on nnsa here in Daresbury and they are set for permissions "-rwxrwxrwx.  1 npg npgstaff 1115 May  4 11:42 CONTENTS"

Please could you alter the permissions of all the Options files to agree with this and re-try the SETUP.

> Concerning nnaida7 and the failure of calibration..... have you tried to calibrate it using the FADC Align  & Control ?
> If it still fails then there is a question about the quality of the clock signal being received by this module.
> I will log through and look at the console log for any anomolies but please try and calibrate.
> Let me know if you wish me to take remote control.

Yes - there have been multiple attempts to re-calibrate nnaida7 ADCs

Note *all* ADCs were calibrated before the most recent FEE64 power cycle.

It is not unusual for ~1-3 FEE64s to fail ADC calibration tests following
a power cycle - there is no obvious pattern to which ADCs fail or which (if
any) will be successfully re-calibrated.

> 10.35 DAQ continues OK 
>       Current file May2017/R19_253
> 
>       ASIC settings 2017Mar27-16.12.39 *except*
>       slow comparator 0x0a
>       LEC/MEC fast comparator 0xff
> 
>       Detector biases; leakage currents OK - see attachment 1
>       FEE64 Temperatures OK - see attachment 2
>       good events; statistics OK - see attachment 3
>       No warnings/errors reported by merger since DAQ GO - see attachment 4
> 
>       *all* system wide checks OK *except* ADC calibration of nnaida7
> 
> 10.38 E17/F11 ambient temperature +24.7 deg C, RH 40.7%, d.p. +10.7 deg C
>       Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)
> 
> 10.39 DAQ stops OK
>       Current file May2017/R19_253
>       Deleted R19*
> 
>       ASIC settings 2017Mar27-16.12.39 *except*
>       slow comparator 0x0a
>       LEC/MEC fast comparator 0xff
> 
>       BNC PB-4 settings 
>       Amplitude 90,000
>       x5 attenuator IN
>       t_r 50ns, tau_d 50us
>       polarity -
>       rate 250Hz range
>       delay MIN, tail pulse
> 
>       Check ASIC Control x2
>       Zero all spectra
> 
> 10.47 DAQ starts
>       File May2017/R20
>       Ras Pi system console logs for USB0 attached - see attachment 5
>       Analysed R20_0. All appears to be working fine. Highest dead time ~0.3%  - see attachment 6
>       Off-line analysis of R20_0 confirms ADC data and discriminator are synchronised - see attachments 7,8,9

Concerning nnaida7 and the failure of calibration..... have you tried to calibrate it using the FADC Align  & Control ?
If it still fails then there is a question about the quality of the clock signal being received by this module.
I will log through and look at the console log for any anomolies but please try and calibrate.
Let me know if you wish me to take remote control.

Offline analysis of AIDA data files R25_12 to R25_22 using MIDASsort

Note

- no calibration (raw ADC data only)
- no thresholds 
- no clustering
- events delimited by > 2us time difference between successive ADC data words 
- HEC = high energy channel = 20GeV FSR range for high energy implants
- LEC = low energy channel = 20MeV FSR range for decays (and pulser)

Attachment 1-4
--------------
s2000-s2005 per DSSSD LEC m_lec_p versus m_lec_n

            following spectra require 0 < m_lec_p < 8 and 0 < m_lec_n < 8
            all combinations of x & y plotted

s2010-s2015 per DSSSD LEC x versus y
s2020-s2025 per DSSSD LEC E_p versus E_n        (20keV/ch nominal)
s2030-s2035 per DSSSD LEC-LEC time              (2.56us/channel)

Attachment 5-8
---------------
s2000-s2005 per DSSSD LEC m_hec_p versus m_hec_n

            following spectra require 0 < m_hec_p < 8 and 0 < m_hec_n < 8
            all combinations of x & y plotted

s2010-s2015 per DSSSD HEC x versus y           
s2020-s2025 per DSSSD HEC E_p versus E_n       (20MeV/channel nominal)
s2030-s2035 per DSSSD HEC-HEC time             (2.56us/channel)

Attachment 9-11
---------------
s2200-s2205 per pixel, per DSSSD HEC-LEC time  (2.56us/channel)

Attachment 12-14
----------------
s2210-s2215 per pixel, per DSSSD HEC-LEC time  (163.840us/channel)

Attachments 15-17
-----------------
s2300-s2305 per DSSSD HEC Energy versus HEC-LEC time (20MeV/channel, 163.840us/channel)
s2400-s2405 per DSSSD LEC Energy versus HEC-LEC time (20keV/channel, 163.840us/channel)
s2500-s2505 per DSSSD x & y strips versus HEC-LEC time (163.840us/channel)

Attachment 18
-------------
Projection s2503 y-strips 0-60 -> HEC-LEC time 163.804us/channel

10.35 DAQ continues OK 
      Current file May2017/R19_253

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida7

10.38 E17/F11 ambient temperature +24.7 deg C, RH 40.7%, d.p. +10.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

10.39 DAQ stops OK
      Current file May2017/R19_253
      Deleted R19*

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

10.47 DAQ starts
      File May2017/R20
      Ras Pi system console logs for USB0 attached - see attachment 5
      Analysed R20_0. All appears to be working fine. Highest dead time ~0.3%  - see attachment 6
      Off-line analysis of R20_0 confirms ADC data and discriminator are synchronised - see attachments 7,8,9

16.55 DAQ continues OK 
      Current file May2017/R20_71

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 10
      FEE64 Temperatures OK - see attachment 12
      good events; statistics OK - see attachment 13
      No warnings/errors reported by merger since DAQ GO - see attachment 14

      *all* system wide checks OK *except* ADC calibration of nnaida7

17.02 E17/F11 ambient temperature +24.0 deg C, RH 40.3%, d.p. +9.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

17.03 DAQ stops OK
      Current file May2017/R20_73
      Deleted R20*

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

17.08 DAQ starts
      File May2017/R21
      Raspberry Pi system console logs for USB0 attached - see attachment 15

17.50 Changed permissions of options files /MIDAS/DB/EXPERIMENTS/Options/nnaida<n>/CONTENTS 
      from mode 644 to mode 777

18.09 DAQ stops OK
      Current file May2017/R21_11
      Deleted R21*

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      DAQ RESET
      DAQ SETUP

      *all* system wide checks OK *except* nnaida7, 9, 13 and 22 ADC calibration failed

      Check ASIC Control x2

17.08 DAQ starts
      File May2017/R22
      Raspberry Pi system console logs for USB0 attached - see attachment 16

18.55 Julabo FL11006 recirculating chiller refilled to "H" marker of the filling level indicator.

      See http://www2.ph.ed.ac.uk/~td/AIDA/Information/Julabo%20FL11006.pdf
      
      To refill from 60% L-H to 100% L-H required c. 4 litres of water.
      Following refill there is a trickle of water from the overflow connector which is being 
      collected by hose and bucket - this flow should cease when the fluid level falls below
      the overflow level.
      
19.20 FEE64 temperatures OK - see attachment 1

10.54 DAQ continues OK 
      Current file May2017/R18_208

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida7

10.58 E17/F11 ambient temperature +24.6 deg C, RH 40.5%, d.p. +10.3 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)

11.00 DAQ stops OK
      Current file May2017/R18_208
      Deleted R17*

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

11.16 DAQ starts
      File May2017/R19
      Ras Pi system console logs for USB0 attached - see attachment 5

18.26 DAQ continues OK 
      Current file May2017/R19_77

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachment 6 & 7
      FEE64 Temperatures OK - see attachment 8
      good events statistics OK - see attachment 9
      No warnings/errors reported by merger since DAQ GO - see attachment 10

      *all* system wide checks OK *except* ADC calibration of nnaida7

18.30 E17/F11 ambient temperature +24.7 deg C, RH 38.9%, d.p. +9.8 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 60%)

10.35 DAQ continues OK 
      Current file May2017/R16

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida7

10.45 E17/F11 ambient temperature +24.8 deg C, RH 39.9%, d.p. +10.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)

11.00 DAQ stops OK
      Current file May2017/R16

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

11.10 DAQ starts
      File May2017/R17

16.30 DAQ continues OK 
      Current file May2017/R17

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 5
      FEE64 Temperatures OK - see attachment 6
      good events; statistics OK - see attachment 7
      No warnings/errors reported by merger since DAQ GO - see attachment 8

      *all* system wide checks OK *except* ADC calibration of nnaida7

16.45 E17/F11 ambient temperature +24.3 deg C, RH 39.1%, d.p. +9.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)

16.50 DAQ stops OK
      Current file May2017/R17

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

16.54 DAQ starts
      File May2017/R18
      Attached Ras Pi system console log for USB0

18:16 Finished rebooting DAQ server and acquisition. All OK, except ADC calibration on #7.
      Started run May2017/R16
      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK
      FEE64 Temperatures OK
      good events; statistics OK
      No warnings/errors reported by merger since DAQ GO

17:50 Rebooted Server and FEE64. Connected remotely to Ras Pi System Console. Repeated USB connection procedure. All 24 modules can now be seen. Sample log attached

10:44 System wide checks all ok
      Leakages and biases all ok (see attachment 1)
      Ambient Temperature 24.4C - Humidity 38.1% - Dew Point +9.1
      FEE temperatures ok (see attachment 2)
      DAQ, Merger and Tape server all still running ok
      Good events statistics (see attachment 3)

      Orientation of RS-232 cards was wrong. They have now been corrected will enable logging then do a halt and
go on the daq.
      Power supply also moved onto AIDA circuit.

11:00 Current file R15_333.
      
11:04 halt and go performed
      24 Log files produced on Rasp Pi console monitor.

The three attachments show the orientation of the console cable pcb relative to the FEE64 connectors.

The first with the other cables and the other two with no cables for clarity of position.

> Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
> If there is nothing to log from the consoles then the Pi won't have made a log file. 
> The software opens and closes the log file each time a line of text comes in from the FEE64.

The most recent power cycle of the FEE64s was May 5

DAQ stop/go per your request - see Elog https://elog.ph.ed.ac.uk/AIDA/571

> Connecting monitor to RasPi system console diagnostics
> 
> May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
> May 18 10:59:38 aidas1 dhcpd: DHCPNAK on 10.32.6.189 to b8:27:eb:6b:0a:a0 via p2p1
> May 18 10:59:38 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:6b:0a:a0 via p2p1
> May 18 10:59:39 aidas1 dhcpd: DHCPOFFER on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 10:59:39 aidas1 dhcpd: Wrote 0 deleted host decls to leases file.
> May 18 10:59:39 aidas1 dhcpd: Wrote 0 new dynamic host decls to leases file.
> May 18 10:59:39 aidas1 dhcpd: Wrote 44 leases to leases file.
> May 18 10:59:39 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 (10.1.1.250) from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 10:59:39 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 11:05:46 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 11:05:46 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> 
> 
> ssh np-monitor -> could not resolve hostname
> ssh 10.1.1.117 -> OK
> 
> Connecting remotely to RasPi system console diagnostics
> 
> http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml -> Looks OK (see attached 1)
> Connected 24 USB cables. 6 cables per HUB. Connected all HUBs to RasPi. Pressed Update USB terminal list. We see 24
> USBs (0-23) (see attached 2)
> Pressed Connect USB terminal. Parse USB Log file for details. We can only see ttyUSB0,1,2,3. Full log:
> 
> ttyUSB0 =>  last host=nnaida14, => last addr=193.62.115.227, ; #panics => 0 ; Finished OK 
> ttyUSB1 =>  last host=nnlycca4, => last addr=193.62.115.240, ; #panics => 0 ; Finished OK 
> ttyUSB10 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB11 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB12 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB13 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB14 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB15 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB16 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB17 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB18 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB19 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB2 =>  last host=nnaida11, => last addr=193.62.115.232, ; #panics => 0 ; Finished OK 
> ttyUSB20 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB21 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB22 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB23 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB3 =>  last host=nnaida12, => last addr=193.62.115.233, ; #panics => 0 ; Finished OK 
> ttyUSB4 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB5 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB6 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB7 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB8 =>  last  => last  ; #panics => 0 ; Not Finished 
> ttyUSB9 =>  last  => last  ; #panics => 0 ; Not Finished 
> 
> ttyUSB0
> ttyUSB1
> ttyUSB10
> ttyUSB11
> ttyUSB12
> ttyUSB13
> ttyUSB14
> ttyUSB15
> ttyUSB16
> ttyUSB17
> ttyUSB18
> ttyUSB19
> ttyUSB2
> ttyUSB20
> ttyUSB21
> ttyUSB22
> ttyUSB23
> ttyUSB3
> ttyUSB4
> ttyUSB5
> ttyUSB6
> ttyUSB7
> ttyUSB8
> ttyUSB9
> 
> Ssh'ed to RasPi. There are only four log files in ~/logs/
> 
> sudo lsusb -t results in
> 
> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
>     |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/5p, 480M
>         |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
>         |__ Port 2: Dev 4, If 0, Class=hub, Driver=hub/4p, 480M
>             |__ Port 1: Dev 5, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 2: Dev 6, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 3: Dev 7, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 4: Dev 8, If 0, Class=hub, Driver=hub/4p, 480M
>                 |__ Port 1: Dev 9, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 2: Dev 10, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 3: Dev 11, If 0, Class=vend., Driver=ftdi_sio, 12M
>         |__ Port 3: Dev 20, If 0, Class=hub, Driver=hub/4p, 480M
>             |__ Port 1: Dev 21, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 2: Dev 22, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 3: Dev 23, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 4: Dev 24, If 0, Class=hub, Driver=hub/4p, 480M
>                 |__ Port 1: Dev 25, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 2: Dev 26, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 3: Dev 27, If 0, Class=vend., Driver=ftdi_sio, 12M
>         |__ Port 4: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
>             |__ Port 1: Dev 13, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 2: Dev 14, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 3: Dev 15, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 4: Dev 16, If 0, Class=hub, Driver=hub/4p, 480M
>                 |__ Port 1: Dev 17, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 2: Dev 18, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 3: Dev 19, If 0, Class=vend., Driver=ftdi_sio, 12M
>         |__ Port 5: Dev 28, If 0, Class=hub, Driver=hub/4p, 480M
>             |__ Port 1: Dev 29, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 2: Dev 30, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 3: Dev 31, If 0, Class=vend., Driver=ftdi_sio, 12M
>             |__ Port 4: Dev 32, If 0, Class=hub, Driver=hub/4p, 480M
>                 |__ Port 1: Dev 33, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 2: Dev 34, If 0, Class=vend., Driver=ftdi_sio, 12M
>                 |__ Port 3: Dev 35, If 0, Class=vend., Driver=ftdi_sio, 12M

Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
If there is nothing to log from the consoles then the Pi won't have made a log file. 
The software opens and closes the log file each time a line of text comes in from the FEE64.

Connecting monitor to RasPi system console diagnostics

May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
May 18 10:59:38 aidas1 dhcpd: DHCPNAK on 10.32.6.189 to b8:27:eb:6b:0a:a0 via p2p1
May 18 10:59:38 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:6b:0a:a0 via p2p1
May 18 10:59:39 aidas1 dhcpd: DHCPOFFER on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 10:59:39 aidas1 dhcpd: Wrote 0 deleted host decls to leases file.
May 18 10:59:39 aidas1 dhcpd: Wrote 0 new dynamic host decls to leases file.
May 18 10:59:39 aidas1 dhcpd: Wrote 44 leases to leases file.
May 18 10:59:39 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 (10.1.1.250) from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 10:59:39 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 11:05:46 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 11:05:46 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1


ssh np-monitor -> could not resolve hostname
ssh 10.1.1.117 -> OK

Connecting remotely to RasPi system console diagnostics

http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml -> Looks OK (see attached 1)
Connected 24 USB cables. 6 cables per HUB. Connected all HUBs to RasPi. Pressed Update USB terminal list. We see 24
USBs (0-23) (see attached 2)
Pressed Connect USB terminal. Parse USB Log file for details. We can only see ttyUSB0,1,2,3. Full log:

ttyUSB0 =>  last host=nnaida14, => last addr=193.62.115.227, ; #panics => 0 ; Finished OK 
ttyUSB1 =>  last host=nnlycca4, => last addr=193.62.115.240, ; #panics => 0 ; Finished OK 
ttyUSB10 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB11 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB12 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB13 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB14 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB15 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB16 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB17 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB18 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB19 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB2 =>  last host=nnaida11, => last addr=193.62.115.232, ; #panics => 0 ; Finished OK 
ttyUSB20 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB21 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB22 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB23 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB3 =>  last host=nnaida12, => last addr=193.62.115.233, ; #panics => 0 ; Finished OK 
ttyUSB4 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB5 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB6 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB7 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB8 =>  last  => last  ; #panics => 0 ; Not Finished 
ttyUSB9 =>  last  => last  ; #panics => 0 ; Not Finished 

ttyUSB0
ttyUSB1
ttyUSB10
ttyUSB11
ttyUSB12
ttyUSB13
ttyUSB14
ttyUSB15
ttyUSB16
ttyUSB17
ttyUSB18
ttyUSB19
ttyUSB2
ttyUSB20
ttyUSB21
ttyUSB22
ttyUSB23
ttyUSB3
ttyUSB4
ttyUSB5
ttyUSB6
ttyUSB7
ttyUSB8
ttyUSB9

Ssh'ed to RasPi. There are only four log files in ~/logs/

sudo lsusb -t results in

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/5p, 480M
        |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
        |__ Port 2: Dev 4, If 0, Class=hub, Driver=hub/4p, 480M
            |__ Port 1: Dev 5, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 2: Dev 6, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 3: Dev 7, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 4: Dev 8, If 0, Class=hub, Driver=hub/4p, 480M
                |__ Port 1: Dev 9, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 2: Dev 10, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 3: Dev 11, If 0, Class=vend., Driver=ftdi_sio, 12M
        |__ Port 3: Dev 20, If 0, Class=hub, Driver=hub/4p, 480M
            |__ Port 1: Dev 21, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 2: Dev 22, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 3: Dev 23, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 4: Dev 24, If 0, Class=hub, Driver=hub/4p, 480M
                |__ Port 1: Dev 25, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 2: Dev 26, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 3: Dev 27, If 0, Class=vend., Driver=ftdi_sio, 12M
        |__ Port 4: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
            |__ Port 1: Dev 13, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 2: Dev 14, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 3: Dev 15, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 4: Dev 16, If 0, Class=hub, Driver=hub/4p, 480M
                |__ Port 1: Dev 17, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 2: Dev 18, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 3: Dev 19, If 0, Class=vend., Driver=ftdi_sio, 12M
        |__ Port 5: Dev 28, If 0, Class=hub, Driver=hub/4p, 480M
            |__ Port 1: Dev 29, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 2: Dev 30, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 3: Dev 31, If 0, Class=vend., Driver=ftdi_sio, 12M
            |__ Port 4: Dev 32, If 0, Class=hub, Driver=hub/4p, 480M
                |__ Port 1: Dev 33, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 2: Dev 34, If 0, Class=vend., Driver=ftdi_sio, 12M
                |__ Port 3: Dev 35, If 0, Class=vend., Driver=ftdi_sio, 12M

10.10 DAQ continues OK 
      Current file May2017/R10_346

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.20 E17/F11 ambient temperature +24.3 deg C, RH 39.0%, d.p. +9.3 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

10.25 DAQ stops OK
      Current file May2017/R13_294

      Files May2017/R13* *deleted* 

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

10.30 DAQ starts
      File May2017/R14

17.34 DAQ stops OK
      Current file May2017/R14_113

      Files May2017/R14* *deleted* 

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control
      Zero all spectra

      *all* system wide checks OK

17.37 DAQ starts
      File May2017/R15

      Detector biases & leakage currents OK - see attachments 6 & 7
      FEE64 Temperatures OK - see attachment 8
      good events statistics - higher rates for several FEE64s - due to addition of system consoles? - see
attachment 9
      No warnings/errors reported by merger since DAQ GO - ~ +30% data rate - see attachment 10

11.11 DAQ found stopped
      Most recent file May2017/R11_245 (last accessed 06:09)

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics zero - see attachment 4
      Merger and Tapeserver terminal server windows are gone - see attachment 5

      *all* system wide checks OK

      No relevant system log messages (/var/log/messages) c. 06.00

      DAQ STOP attempt #1  did not stop
                       #2  timeout nnaida1, nnaida2-24 did not stop
                       #3  timeout nnaida1, nnaida2-24 did not stop

      Restart, configure and setup/go merger terminal server
      Restart TapeServer terminal server

      DAQ STOP attempt #3 all stop OK

11.24 Analysis of data file R11_245 - see attachment 6
      dead-time/idle-time < 0.5%
      AIDA SYNC100 variations ~160/78000

11.34 E17/F11 ambient temperature +24.5 deg C, RH 37.0%, d.p. +9.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

13.06 Check ASIC Control x2
      Zero all spectra

      Restart terminal servers for Httpd for Merger/TapeServer, Merger & TapeServer
      Restart browser for Merger & TapeServer
      N.B. *no FEE64 power cycle, no DAQ RESET, SETUP etc*

11.30 DAQ starts
      File May2017/R12

13.10 DAQ GO - data transfer links for nnaida11 & nnaida12 dropped

      DAQ STOP
      Disable all data transfer links
      Restart terminal servers for Httpd for Merger/TapeServer, Merger & TapeServer
      Restart browser for Merger & TapeServer
      Enable all data transfer links

      DAQ GO OK
      File May2017/R13

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

11.19 DAQ continues OK 
      Current file May2017/R10_346

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

11.22 Analysis of data file R10_246 - see attachment 6
      dead-time/idle-time < 1%
      AIDA SYNC100 variations ~700/97000

10.10 E17/F11 ambient temperature +24.5 deg C, RH 38.0%, d.p. +9.4 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

11.23 DAQ stops OK
      Current file May2017/R10_347

      Files May2017/R10* *deleted* 

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

11.30 DAQ starts
      File May2017/R11

18.18 Detector biases & leakage currents OK - see attachments 7 & 8
      FEE64 Temperatures OK - see attachment 9

18.24 E17/F11 ambient temperature +24.5 deg C, RH 36.8%, d.p. +8.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

10.01 DAQ continues OK 
      Current file May2017/R8_334

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.06 Analysis of data file R8_333 - see attachment 6
      dead-time/idle-time < 2%
      AIDA SYNC100 variations ~1800/95000

10.10 E17/F11 ambient temperature +24.8 deg C, RH 36.4%, d.p. +8.9 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

10.15 DAQ stops OK
      Current file May2017/R7_298

      Files May2017/R8* *deleted* 

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator *0x08*
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

10.20 DAQ starts
      File May2017/R8

      Transient timeouts at DAQ GO for FEE64s nnaida1 and nnaida2 which resolved themselves without user
intervention
      DAQ run control transitioned from 'RESET and STOP/GO' to 'RESET' to 'RESET and STOP/GO'

10.22 DAQ stops
      File May2017/R9

      Tapeserver data rates fluctuate 10-30Mb/s possibly due to parallel disk I/O activity (deleting R8 files)

      Transient timeouts at DAQ STOP for FEE64s nnaida1 and nnaida2 which resolved themselves without user
intervention - see attachment 7
      DAQ run control transitioned from 'RESET and STOP/GO' to 'RESET' to 'RESET and STOP/GO'

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator *0x0a*
      LEC/MEC fast comparator 0xff

10.31 DAQ starts 
      File May2017/R10

09.54 DAQ continues OK 
      Current file May2017/R7_292

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.02 Rate/HitRate spectra - see attachments 6 & 7
      1.8.L ADC spectra - see attachments 8 & 9
      1.8.W waveforms - see attachments 10-13

10.07 Analysis of data file R7_294 - see attachment 14
      dead-time/idle-time < 0.5%
      AIDA SYNC100 variations ~330/102000

10.17 E17/F11 ambient temperature +25.1 deg C, RH 37.2%, d.p. +9.4 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

10.19 DAQ stops OK
      Current file May2017/R7_298

      Files May2017/R7* *deleted* 

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

10.22 DAQ starts
      File May2017/R8

      Analysis of May2017/R8_3 confirms ADC data synchronisation - see attachments 15 & 16

See https://elog.ph.ed.ac.uk/AIDA/555

Date files May2017/R1_0 to May2017/R_79 are an extended (c. 3.8 day) background run with
BNC PB-4 Pulser OFF and and a relatively high slow comparator threshold 0x64 to reduce
data volume.

Attachment 1 - DSSSD#1-6 m_p versus m_n 

Attachment 2 - DSSSD#1-6 x versus y hit patterns

Attachment 3 - DSSSD#1-6 E_p versus E_n (dispersion ~20-23keV/channel)

Attachment 4 - DSSSD#1-6 E_p versus E_n (with tags)

Attachment 5 - 2D contour levels & colours for all 2D spectra above

Attachment 6 - MIDASsort subroutine

Attachment 7 - MIDASsort namelist I/O variables

Attachments 8-10 - ADC offset calculation logs etc

Attachment 11 - spectrum titles

MIDASsort calculates channel and ADC data as follows

       ch = channel + ( module - 1 ) * 64 + ( range * 2048 )
       adc_data = INT( RSHIFT( ABS( adc_data - 32768 ), 3 ) - offset(ch) + 0.5 )

       where

       channel = FEE channel # (0-63)
       module = FEE module # (1-24)
       range = LEC or HEC (LEC = 0, HEC = 1)

ADC offsets were calculated using the pulser walkthrough data of files May2017/R4
and command

cd ~/td/calibration
offsets /homes/npg/Spectra/R4 100 1400 15 10

where the peakfind peak search parameters are limits 100-1400 channels, fwhm=15 channels and acceptance=10%

Probably ~10% of ADC offsets need manual checking/adjustment

The 2D spectra (attachments 1-4) were produced for events with

multiplicities 0 < m_p < 8 *and* 0 < m_n < 8
all x-y combinations incremented

no clustering, gain matching or software thresholds

All DSSSDs show Uranium 4n+2 decay sequence background spectra from the intrinsic activity of the DSSSDs
and airborne decay products (e.g. 222Rn). Not clear why statistics are higher for DSSSD#1 cf. DSSSD#2-6.
One possibility is the activity of the aluminized Mylar window just upstream of DSSSD#1? Surrounding air
and Al snout would presumably affect DSSSD#1 and #6 about the same.

10.35 DAQ continues OK 
      Current file May2017/R6_246

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x20
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.46 Rate/HitRate spectra - see attachments 6 & 7
      1.8.L ADC spectra - see attachments 8 & 9
      1.8.W waveforms - see attachments 10-13

10.51 Analysis of data file R6_245 - see attachment 14
      Zero AIDA pause/resume
      Zero idle-time
      AIDA SYNC100 variations ~33/503400

12.03 E17/F11 ambient temperature +24.6 deg C, RH 39.4%, d.p. +9.9 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

12.04 DAQ stops OK
      Current file May2017/R6_250

      Files May2017/R6* *deleted* 

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

12.15 DAQ starts
      File May2017/R7

14.30 Analysis of May2017/R7_29

      ADC data synchronised - see attachments 15 & 16

14.37 Analysis of data file R7_29 - see attachment 17
      AIDA pause/resume for some FEE64s
      dead-time/idle-time <0.5%
      AIDA SYNC100 variations ~300/100000

10.55 DAQ continues OK 
      Current file May2017/R6_181

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x20
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

      All histograms zero'd

11.04 Analysis of data file R6_180 - see attachment 6
      Zero AIDA pause/resume
      Zero idle-time
      AIDA SYNC100 variations ~22/499760

11.20 E17/F11 ambient temperature +24.6 deg C, RH 39.6%, d.p. +9.9 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

13.43 DAQ continues OK 
      Current file May2017/R6_123

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x20
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

13.37 E17/F11 ambient temperature +24.4 deg C, RH 37.3%, d.p. +9.1 deg C

13.58 1.8.L ADC spectra - see attachments 6 & 7 
      1.8.W waveforms - see attachments 8-11

14.16 Analysis of data file R6_124 - see attachment 12
      Zero AIDA pause/resume
      Zero idle-time
      AIDA SYNC100 variations ~20/468430

18.36 DAQ continues OK 
      Current file May2017/R6_137

      Detector biases & leakage currents OK - see attachments 13 & 14
      FEE64 Temperatures OK - see attachment 15
      'good events' statistics OK - see attachment 16

      *all* system wide checks OK

10.55 DAQ continues OK 
      Current file May2017/R6_44

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x20
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.48 E17/F11 ambient temperature +24.7 deg C, RH 35.3%, d.p. +8.3 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

18.32 DAQ continues OK 
      Current file May2017/R6_67

      Detector biases & leakage currents OK - see attachments 6 & 7
      FEE64 Temperatures OK - see attachment 8
      'good events' statistics OK - see attachment 9

      *all* system wide checks OK

10.25 DAQ continues OK 
      Current file May2017/R1_79

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0xff

      BNC PB-4 pulser OFF

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.28 1.8.L ADC spectra - see attachments 6 & 7 
      1.8.W waveforms - see attachments 8-11

10.43 DAQ stopped 
      Current file May2017/R1_79

10.48 E17/F11 ambient temperature +24.5 deg C, RH 29.0%, d.p. +5.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)


10.58 DAQ starts
      File May2017/R2 *IGNORE*

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate ~250Hz 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39
      Slow comparator 0x0a
 
      See attachment 12

11.02 DAQ starts
      File May2017/R3 *IGNORE*

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 12,000 - 2,000 @ 2,000 step
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate ~250Hz 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39

      See attachment 13

Pulser walkthroughs R2 & R3 should be ignored as + polarity test input
had significantly lower amplitude (x2 oor more) than - polarity test input.
The + polarity test input is derived from tee'd output from BNC PB-4 and
EG&G Ortec 433 Sum & Invert - physically moving the cabling and connectors
between these two points changed tail pulse amplitude or produced a transient
(non-tail) pulse with duration ~ 100ns. Not clear which cable or connector
is the issue (all cables and connectors were individually replaced) but output
amplitude currently correct so will proceed.

11.22 DAQ starts
      File May2017/R4

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate ~250Hz 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39
 
      See attachment 14

11.28 DAQ starts
      File May2017/R5

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 12,000 - 2,000 @ 2,000 step
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate ~250Hz 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39

      See attachment 15

17.25 E17/F11 ambient temperature +24.7 deg C, RH 28.1%, d.p. +5.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

17.32 Detector biases & leakage currents OK - see attachments 16-17
      FEE64 Temperatures OK - see attachment 18

17.40 DAQ starts
      File May2017/R6

      Continuing DAQ test

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      frequency 25Hz range 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39
      slow comparator 0x20

The operating proceedure for the Raspberry Pi FEE64 console monitor is attached.

Please let me know if more detail is required.

10.11 DAQ continues OK 
      Current file May2017/R1_58

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0xff

      BNC PB-4 pulser OFF

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

10.19 1.8.L ADC spectra - see attachments 6 & 7 
      1.8.W waveforms - see attachments 8-11

10.35 E17/F11 ambient temperature +24.2 deg C, RH 33.2%, d.p. +7.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

09.28 DAQ continues OK 
      Current file May2017/R1_36

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0xff

      BNC PB-4 pulser OFF

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics OK - see attachment 4
      No warnings/errors reported by merger since DAQ GO - see attachment 5

      *all* system wide checks OK

09.40 1.8.L ADC spectra - see attachments 6 & 7 
      1.8.W waveforms - see attachments 8-11

10.00 E17/F11 ambient temperature +24.3 deg C, RH 39.4%, d.p. +9.6 deg C

18:11 System wide checks all ok
      Leakage and bias all ok - see attachment 12
      Fee temperatures all ok - see attachment 13
      LN2 Refill cycle has been running the past few days and we have encountered no issues
      AIDA daq continues to run fine

19:20 Ambient temperature 24.5 Humdity 38.3% D.P +9.2

11.30 Detector biases & leakage currents OK - see attachments 1 & 2
      Ambient Temperature 24.3 Humidity 37.5% Dew Point 8.9
      FEE64 temperatures - see attachment 3
      Good events statistics (N.B. slow comparator=0x64, fast comparator=0xff) - see attachment 4

      System wide checks all ok

      Screen shots for layout 3 and 4 showing 1.8.L ADC spectra. Note that in the good events statistics a
      higher rate is seen in the p+ junction strips
      This is seen in the layouts as well.
 
16:00 Biases and leakages ok (attachment 5)
      Ambient Temperature 24.4 Humidity 39.7 Dew Point 9.7
      FEE64 Temperatures - attachment 6

Relatively painless start-up. Had an issue with firefox where all bookmarks had been forgotten.
All drop down menues in the DAQ did not work.
Kill all firefox processes to restore.

Had to restart DHCP to get the rasp pi working again.

At first no pulser was visible in all p-side FEEs. Cable and BNC adapter on output of inverter were switched out
and the inverter output
was switched from B to A.

After this pulser signals were visible in all ASICS bar NNAIDA 14 ASIC 1. Power cycle was needed to regain this.
No ADC data and no fast discriminator data. Waveform showed baseline at 16K compared to 8K expected.

Layouts 1,2,3,4,7 and 8 attached (Zoomed in waveforms are included for 7 and 8 around baseline) attachments 1-8

Temperatures included as attachment 9

Leakages and bias all ok see attachment 10
Ambient T 24.3C Humidity 34.5% Dew point 7.6C (Measurements taken AM)

system wide checks all ok.

Pulser settings

Amplitude 90000
x5 Attenuator in
Rise time tr 50ns fall time tau d 50us
Negative polarity
freq 25Hz range
Delay min
Internal ref, tail pulse

ASIC settings DB key 2017Mar27-16.12.39

16:26 Slow comparator threshold moved to 100
      Fast comparator theshold LEC/MEC to 255
      Run started to disk May2017/R1

I tested the FWHM of a BNC PB-5 pulser signal as a function of shaping time using the first produced ISOL FEE64 card in Daresbury Labs.

Find attached four representative spectra per ASIC taken with 8, 5 and 0.5 us shaping time values. Run times are different.

Also find attached a plot of the FWHM as a function of the shaping time for the first channel in each ASIC. There appears to be a maximum of the FWHM at around 4 us. This may indicate the main source of noise is external, and at ~4 us the band pass lets most of the noise in.

Unlike the FEE cards employed in RIKEN, this card is grounded to the metal base plate through the screws. In order to investigate the effect of this ground on the noise level of the ADCs in the card, the card was disconnected from the metal plate base. An additional layer of insuating material was placed between the base and the FEE64 card. Nylon screws rather than metal screws were employed to affix the card to the base, and the same tests as before were repeated. See plot below. Overall, the same trend is recovered but suprisingly the FWHM is larger than before for ASICs #1,2 and #3. ASIC #4 has a lower FWHM than before. The reason for the change is not obvious, and may need further investigation.

Carlo

BNC PB-5 parameters

Delay 250 ns

Rate 100 Hz

Polarity POS

Pulse Top TAIL

Amplitude 0.5 V

I've been going through collecting the BigRIPS root files with Phong and making sure they are on AIDAs1.

The files we have for NP1306 are not the standard format so to get particle ID you need to do this command taken
from the RIKEN elog.

Command to construct the PID in the merged files from preliminary data:

Example file a11111_b1181_e_1130_ion.root

tree->Draw("(F11ICADC[0]+F11ICADC[1]+F11ICADC[2]+F11ICADC[3]+F11ICADC[4]+F11ICADC[5])/6:F11Pla_TM-F3Pla_TM+F5X*0.0383261>>h(500,0,25,500,0,16000)","","colz");

Though these root files were not created by the BigRIPS team so can be cleaned up further but should be good
enough for initial analysis.

It is all saved locally file:///homes/npg/Documents/2017Ca/

Although, a little more hacking is required to get the view.html webpage to allow you to click each run

Whether or not it is useful I don't know, but it was generated by a shell script
/homes/npg/Documents/bigrips_summary.sh which can be modified and used for future experiments.

11:32 Pulser walkthrough, 90k down to 10k, 10k steps, 1 min per step
      R26
    
11:41 stop run R26


11:44 Pulser walkthrough, 10k to 2k in 2k steps, 90 seconds per step
      R27
11:53 stop run R27

11:56 Pulser walkthrough, 2k to 10k in 2k steps (90 sec each) & 10k to 40k in 10k steps (60 sec per step)
      R28

12:05 Attachment 1 shows biases ("bias_2_a.png")

12:07 stop run R28

12:15 background run, R29

12:39 stop run 29.

00:12 BigRips started run 0223 (Started at 00:12)
      AIDA file R20_344
      System wide checks all ok
      BRIKEN start run 67

01.38 Beam stopped to F11. ~1/2 way through R20_364.

01.43 Beam returned to F11. 1GB through R20_366.
      BigRIPS file 0224.
      BRIKEN run 68.
      System-wise checks all ok, except nnaida1 global clocks failed 6.
      Temps ok. Leakage currents ok (see attachment 1).

02.43 BigRIPS started run 0225. Start of R20_381
      
02.48 BRIKEN run 69 started. Start of R20_382.

03.28 System-wide checks same as previous. (R20_391)

03.43 BigRIPS file 0226. ~1/2 way through R20_394

03.48 BRIKEN run 70 started.

04.46 BigRIPS file 0227 started. End of R20_410.

04.48 BRIKEN run 71 started. Start of R20_411.

05.31 36Ne setting is over. End of R20_421.
      BigRIPS team is changing setting for calibration. No beam will go through Zerodegree
      
05.51 R20 stopped (I was getting food).

06.30 20mm Al degrader + 3mm plastic removed from F8. 23mm Al degrader placed at F11 after IC.

06.35 BigRIPS file 0237 started - 38Mg setting.

06.37 R21 started on 38Mg setting.

06.57 Beam stopped to F11 - accelerator problem.
      ~700MB into R21_5.
      Returned shortly after.

07.23 BigRIPS file 0245 started. ~3/4 way through R21_10.

07.26 BigRIPS file 0246 started. ~1/2 way through R21_11.

07.32 BigRIPS file 0247 started. Start of R21_13.

07.34 BigRIPS file 0248 started. ~1/2 way through R21_13.

07.38 BigRIPS file 0249 started. ~1GB into R21_15.

07.40 BigRIPS file 0250 started. Start of R21_16.

07.41 BigRIPS file 0251 started. Little way through R21_16.

08.06 38Mg setting finished. R21 stopped.

08.08 R22 started - got a bit trigger happy with the DAQ. No beam to F11.

08.10 Degrader set to 10mm Al.

08.16 BigRIPS file 0252 started on 39Al setting.

08.17 R23 started on 39Al setting.

08.20 R23 ended.

08.26 40Si setting. Too high rate for AIDA so beam won't be sent down ZDS.

08.40 F11 degrader set to 15mm Al fixed + 4mm Al variable (all in).

08.43 2nd run at 39Al setting.
      BigRIPS file 0254 started.
      R24 started.

09.00 R24_4 closed. May have been issues with degrader - not sure we were implanting in AIDA...
      End of experiment!

09.07 AIDA background run started - R25.
      Pulser is on in the run though.

09.20 R25 ended.
      BigRIPS run summary attached.

00.46 34Ne stopped for 36Ne setting (R19_37).
      DAQ kept running as I was upstairs getting some food.
      Stopped at R19_45.

00.57 BigRIPS change to 36Ne setting. Start file 0196. Still tuning.
      Temps ok.
      Leakage currents and bias ok (see attachment 1).

01.32 R20 started on 36Ne setting.
      BigRIPS file 0197 (started @ 01.30).
      BRIKEN file 

02.23 Beam stopped to F11. End of R20_12.

02.28 Beam returned to F11. Start of R20_14.
      BigRIPS file 0198.

02.48 BRIKEN file 48 started.
      Start of R20_19.
      All system checks passed except nnaida1 fails global clocks 6.
      Temps and leakage currents ok.

03:28 BigRips file 0199 (started at 03:27)
      AIDA at end file R20_28
      BRIKEN file 47 started
      All system wide checks ok.
      Temps and leakage currents ok

04:36 BigRIPS file 0200
      Coincides with end of AIDA file R20_46
      BRIKEN file 48
      All system wide checks ok
      Temps and leakage currents ok
      ASIC load check all ok 

04:59 BigRips run 0201 (Started at 4:45)
      Corresponding AIDA file for start of BigRips run is R20_49
      BRIKEN file 49
      Corresponding AIDA file for start of BRIKEn is R20_52

05:33 System wide checks all ok
      Temperatures, biases and leakage currents ok (seet attachment 2)

05:44 BigRips start run 0202
      Start of AIDA file R20_64
      BRIKEN file 50
      System wide checks passed
00.46 34Ne stopped for 36Ne setting (R19_37).
      DAQ kept running as I was upstairs getting some food.
      Stopped at R19_45.

00.57 BigRIPS change to 36Ne setting. Start file 0196. Still tuning.
      Temps ok.
      Leakage currents and bias ok (see attachment 1).

01.32 R20 started on 36Ne setting.
      BigRIPS file 0197 (started @ 01.30).
      BRIKEN file 

02.23 Beam stopped to F11. End of R20_12.

02.28 Beam returned to F11. Start of R20_14.
      BigRIPS file 0198.

02.48 BRIKEN file 48 started.
      Start of R20_19.
      All system checks passed except nnaida1 fails global clocks 6.
      Temps and leakage currents ok.

03:28 BigRips file 0199 (started at 03:27)
      AIDA at end file R20_28
      BRIKEN file 47 started
      All system wide checks ok.
      Temps and leakage currents ok

04:36 BigRIPS file 0200
      Coincides with end of AIDA file R20_46
      BRIKEN file 48
      All system wide checks ok
      Temps and leakage currents ok
      ASIC load check all ok 

04:59 BigRips run 0201 (Started at 4:45)
      Corresponding AIDA file for start of BigRips run is R20_49
      BRIKEN file 49
      Corresponding AIDA file for start of BRIKEn is R20_52

05:33 System wide checks all ok
      Temperatures, biases and leakage currents ok (seet attachment 2)

05:44 BigRips start run 0202
      Start of AIDA file R20_64
      BRIKEN file 50
      System wide checks passed

6:15 Operators call...R20_72 1.5 GB
     The BigRIPS system display PC looks like it crashed

6:22 2017-04-01 06:21:19 BigRIPS run 203 starts
      AIDA run 20_74 is about 25% started
      BRIKEN run 51

6:40 Phone rings, AIDA run R20_79 just started
      Stripper foil seems to have been changed

6:43 2017-04-01 06:42:03 BigRIPS starts a new run     
     R20_79 is 75% the way through.
     BRIKEN run 52
     System checks passed.

7:09 PPACs are discharging very frequently.

7:39 counted 8 discharges.  It's about once in four minutes.  An acceptable discharge rate is several times in
one shift.
     Firstly, each discharge damages the PPAC.  Even 10 to 20 discharges can easily cause dead regions of cm size.
     Secondly, with the frequency of discharge, we are now missing like as much as 25% of all events (at least
at a given PPAC)
     As the detector becomes more damaged, it can discharge more frequently.
     Moving the detector's position slightly can help to alleviate the problem by putting the beam on a fresh region
     Anyway, as for a parasitic run they can do whatever they want, but it seems they are mis-operating the PPACs
     Basically the voltage is too high or the detector is too old and needs to be replaced.

7:40 2017-04-01 07:40:12 BigRIPS run 205 begins
     AIDA run R20_94 is at 721 MB at 7:40
     BRIKEN run 53
     System-wide checks are okay

8:08 Bias and Temp attachments 3 & 4 (bias_1_.png and temp_1_a.png)

9:01 BigRIPS run 206 2017-04-01 09:01:06
     AIDA run R20_115 is at 600 MB at 9:01
     BRIKEN run is 54
     System-wide checks

9:39 Now that the students went home and some more experienced beam physicists are on shift, the PPAC discharge rate
goes down to ~2x per hour.

10:02 New BigRIPS run at 2017-04-01 10:01:40 number 0207
     AIDA run R20_130 was at 1.9 GB at 10:02..
     BRIKEN run 55
     System-wide checks passed

(I went upstairs for a break...it seems that the beam got turned off at some point)

10:55 Phone call, and I hear the chime for the beam coming back.

10:56 BigRIPS starts run 0208 2017-04-01 10:56:06
      AIDA run R20_145 has just started at 10:56
      BRIKEN run was not restarted and continued as run 55
      System-wide checks are okay

11:02 We checked that the synchronization looks okay.

11:58 Noticed that BigRIPS started a new run at 2017-04-01 11:56:42, run 0209
     AIDA run R20_160 should overlap about 50% with this run.
     BRIKEN run is 56
     System wide checks performed.
     Attached are Biases and Temperatures as 5 & 6 ("bias_1_b" ; "temp_1_b")

12:58 BigRIPS starts run 0210 at 2017-04-01 12:57:21
     AIDA run R20_176 was 422 MB at 12:57
     BRIKEN 57
     Pass system-wide checks

14:30 beam current has been fluctuating for awhile

14:50 BigRIPS started a new run 0212 2017-04-01 14:44:18
     R20_203 was at 1.2 GB at 14:44
     BRIKEN run 58
     System checks okay

15:18 Phone rings.  RF is down so the beam stopped.
     R20_212 is at 500 MB at 15:19

15:57 Phone rings again.

16:37 BigRIPS start run 0214
      Start of AUDA file R20_232
      BRIKEN run 59
      System wide check all ok

16:53 Biases and leakage currents ok (See attachment 7)

17:36 BigRips start run 0215
      Strt of AIDA file R20_247
      BRIKEN start run 60
      System wide checks all ok
      Temperatures all ok

18:04 BigRips stop to change gas stripper foil
      AIDA file R20_254

18:09 BigRips start run 0216
      AIDA file R20_255
      BRIKEN start file 61
      System wide checks all ok
6:15 Operators call...R20_72 1.5 GB
     The BigRIPS system display PC looks like it crashed

6:22 2017-04-01 06:21:19 BigRIPS run 203 starts
      AIDA run 20_74 is about 25% started
      BRIKEN run 51

6:40 Phone rings, AIDA run R20_79 just started
      Stripper foil seems to have been changed

6:43 2017-04-01 06:42:03 BigRIPS starts a new run     
     R20_79 is 75% the way through.
     BRIKEN run 52
     System checks passed.

7:09 PPACs are discharging very frequently.

7:39 counted 8 discharges.  It's about once in four minutes.  An acceptable discharge rate is several times in
one shift.
     Firstly, each discharge damages the PPAC.  Even 10 to 20 discharges can easily cause dead regions of cm size.
     Secondly, with the frequency of discharge, we are now missing like as much as 25% of all events (at least
at a given PPAC)
     As the detector becomes more damaged, it can discharge more frequently.
     Moving the detector's position slightly can help to alleviate the problem by putting the beam on a fresh region
     Anyway, as for a parasitic run they can do whatever they want, but it seems they are mis-operating the PPACs
     Basically the voltage is too high or the detector is too old and needs to be replaced.

7:40 2017-04-01 07:40:12 BigRIPS run 205 begins
     AIDA run R20_94 is at 721 MB at 7:40
     BRIKEN run 53
     System-wide checks are okay

8:08 Bias and Temp attachments 3 & 4 (bias_1_.png and temp_1_a.png)

9:01 BigRIPS run 206 2017-04-01 09:01:06
     AIDA run R20_115 is at 600 MB at 9:01
     BRIKEN run is 54
     System-wide checks

9:39 Now that the students went home and some more experienced beam physicists are on shift, the PPAC discharge rate
goes down to ~2x per hour.

10:02 New BigRIPS run at 2017-04-01 10:01:40 number 0207
     AIDA run R20_130 was at 1.9 GB at 10:02..
     BRIKEN run 55
     System-wide checks passed

(I went upstairs for a break...it seems that the beam got turned off at some point)

10:55 Phone call, and I hear the chime for the beam coming back.

10:56 BigRIPS starts run 0208 2017-04-01 10:56:06
      AIDA run R20_145 has just started at 10:56
      BRIKEN run was not restarted and continued as run 55
      System-wide checks are okay

11:02 We checked that the synchronization looks okay.

11:58 Noticed that BigRIPS started a new run at 2017-04-01 11:56:42, run 0209
     AIDA run R20_160 should overlap about 50% with this run.
     BRIKEN run is 56
     System wide checks performed.
     Attached are Biases and Temperatures as 5 & 6 ("bias_1_b" ; "temp_1_b")

12:58 BigRIPS starts run 0210 at 2017-04-01 12:57:21
     AIDA run R20_176 was 422 MB at 12:57
     BRIKEN 57
     Pass system-wide checks

14:30 beam current has been fluctuating for awhile

14:50 BigRIPS started a new run 0212 2017-04-01 14:44:18
     R20_203 was at 1.2 GB at 14:44
     BRIKEN run 58
     System checks okay

15:18 Phone rings.  RF is down so the beam stopped.
     R20_212 is at 500 MB at 15:19

15:57 Phone rings again.

16:37 BigRIPS start run 0214
      Start of AUDA file R20_232
      BRIKEN run 59
      System wide check all ok

16:53 Biases and leakage currents ok (See attachment 7)

17:36 BigRips start run 0215
      Strt of AIDA file R20_247
      BRIKEN start run 60
      System wide checks all ok
      Temperatures all ok

18:04 BigRips stop to change gas stripper foil
      AIDA file R20_254

18:09 BigRips start run 0216
      AIDA file R20_255
      System wide checks all ok

18:25 BRIKEN start file 61
      AIDA file R20_259
      BRIKEN had to restart the computer so a resync needed to be done

19:07 BigRips start file 0217
      AIDA on file R2-_270 (End of file)
      BigRips reducing beam intensity to calibrate the beam current

19:12 Back to normal BigRips condition
      Al degrader 1mm is removed
      BigRips run 0218 (started at 19:11)
      AIDA file R20_271
      BRIKEN start file 62
      System wide checks ok

20:06 Bias and leakage currents ok
      Temperature ok

20:12 BigRips start run 0219
      Start of AIDA file R20_287
      BRIKEN starts file 64
      System wide checks all ok
      ASIC load check ok

21:12 BigRips start run 0220
      AIDA file R20_301
      System wide checks ok
      BRIKEN starts file 65

22:12 BigRips stopped to change stripper foils
      End of AIDA file R20_315

22:20 BigRips start run 0220
      End of AIDA file R20_317
      System wide checks and temperatures ok
      BRIKEN start file 66

23:08 Biases and leakages ok

23:10 BigRips start run 0222
      End of AIDA file R20_329
      BRIKEN start file 67
      System wide checks all ok

00:11 BigRIPS has started a new run at 00:10:42 run 0165.
      AIDA subrun R16_357 was about halfway (~1 GB) at 00:11.
      BRIKEN run 21 ( so-called 170331_0012_Mg40 )

      Check clock status: FEE64 module nnaida1 global clocks failed, 6 [ as usual, and it is set to ch 2 ]
      ADC calib all pass
      Clock timestamp, passed
      Sync counter error, passed
      Sync pulses all consistently near 3 x 10^7
      Memory info from Linux FEE64 all around 35k to < 40k
     
      Sync check on the BRIKEN terminal is looking all consistent to me.

      Temperatures are seen as attachment 1, temps_31_a.png
      Biases and leak currents seen as attachment 2, bias_31_a.png

      As for what I've checked then we continue on in what appears to be a stable condition.
     
01:12 I can see BigRIPS team at their DAQ PC about to change the run.
      2017-03-31 01:12:24 BigRIPS run 0166 starts
      AIDA subrun R16_372 is 75% finished at 1:12
      BRIKEN run 22, [ 170331_0114_Mg40 ] -- timestamp beginning at 1:14 means they are almost exactly at the
beginning of AIDA R16_373

      Check clock status, ibid to above
      Check ADC calib, ibid
      Check ASIC clock timestamp, ibid
      Check sync errors, ibid
      Check sync pulses, 3.2 x 10^7 consistently
      Check FEE64 memory, 36k to 37k.

      Sync check at BRIKEN is still running and shows the clocks are lined up.

      Continue.
     

02:10 BigRIPS begins a new run, number 0167
      AIDA subrun R16_386 finished at 2:10, so BigRIPS 0167 should correspond nicely with the start of AIDA R16_387
      BRIKEN run number 23 [ 170331_0214_Mg40 ]

      All six (6) system wide checks were performed.  The situation remains stable as above.

03:13 BigRIPS starts a new run at 3:12:51
      AIDA R16_402 is about 50% complete at 3:13
      BRIKEN 24 [ 170331_0314_Mg40 ]

      All system-wide checks are passed.  Number of sync pulses is ~3.7 x 10^7

03:33 Bored so here's some spectra, attachment 3 as pulses_31_b.png.  It looks good.

04:10 BigRIPS run 0169 began at 2017-03-31 04:09:50
     AIDA is R16_416 50% though at this time.
     BRIKEN 25 [ 170331_0413_Mg40 ]

     All checks passed.  I'm not just writing it, but they were performed :)

     See attachment 4 for bias.  had screencapped temp but forgot to update so it was just a clone of attachment 1 (this
was noticed at 8:07)

04:58 Beam operators called.  They stopped the beam so they can exchange the carbon stripper foil.
     AIDA R16_428 was 25% through at 4:58.

05:02 R16_429 is at 600 MB I hear the chime to indicate the beam is back
     BigRIPS 2017-03-31 05:02:57 run 0170 is started
     BRIKEN run 27 [ 170331_0504_Mg40 ] -- NB: Run 26 was junk (some mistake)

     All six (6) system wide checks are a go.  3.7 x 10^7 is the sync pulse count.
     Continue.

05:12 I show you the AIDA look good in attachment 5 spec_31_c.png

06:10 still waiting on BigRIPS to notice what time it is.

06:14 BRIKEN sends the resync.  (this note is written at 7:11..see below)

06:16 R16_447 Jorge realizes there are no neutrons in BRIKEN, and we realize the second beam physicist is on the phone.

06:29 Beam physicists hang up the phone...2017-03-31 06:29:30 BigRIPS run 0171
     AIDA run R16_451 is almost exactly beginning at 6:29
     BRIKEN run number 28
     The system wide checks are consistent as before
          FEE64 module nnaida1 global clocks failed, 6 
          Check sync pulses sees 3.9 x 10^7
     
06:36 - I asked the BigRIPS team the situation.  Basically, they calibrate the faraday cup and also three plastic
scints near F0 (primary target) for calibrartion (cross section estimation) purposes.
     So it seems in this time THEY have the beam yet we do not because it is not reaching all the way to F11 the
entire time.
     Though I do not want to bother the operators with too many questions, it can be that parts of BigRIPS run 0170
near the end will not correlate with our data.

07:11 - I had not caught that BRIKEN sent the resync.  It was confirmed that it was the only resync issued tonight.
     Please see the attachment 6 "spec_31_d.png", though I'm not sure it would be useful

07:47 Not sure the situation.  Beam physicists were near their DAQ PC for a bit, then on the phone, but their run has not
restart.
     AIDA run R16_469 at this time, just to note.

07:57 2017-03-31 07:55:33 BigRIPS run 0177 is started.  Evidently run 0176 is skipped somehow.
     AIDA R16_471 was at 1.9 GB at 7:57 so probably it mostly correlates with the start of the BigRIPS run.
     BRIKEN run number 29 (?) [ 170331_0758_Mg40 ]

     [8:15 - confirmed the problem with beam physicists was a DAQ issue.  Thus BigRIPS run 0172 is junk, and they took
some time to resolve their issue.]
      
     System-wide checks look normal.  4 x 10^7 sync pulses
     Attachments 7 and 8 have bias and temp ("bias_31_e.png" and "temp_31_e.png")

08:07 When doing the temperature this time, I realized that an early temperature "temp_31_b" was just a clone of
"temp_31_a" as I forgot to refresh.  Now the attachment numbering changes as I delete it, and the elog is updated to
correctly reflect the new ordering.  I should be more careful.

08:56 BigRiips start run 0174
      End of AIDA file R16_485
      BRIKEN file 31
      System wide checks all ok *except* nnaida1 fails global clocks 6
      ASIC check all ok

09:44 BigRips stopping the beam
      Half way through AIDA file R16_498

09:57 System wide checks all ok *except* nnaida1 fails global clocks 6

10:01 BigRips start run 0175
      Start of AIDA file R16_502
      BRIKEN file 32

10:11 Biases and leakage currents ok (See attachment 9)

10:19 BigRips start run 0176
      End of AIDA file R16_506
      
10:23 BRIKEN start file 33
      AIDA on file R16_507

11:21 BigRips start run 0177
      End of AIDA file R16_521
      BRIKEN start file 34
      System wide checks all ok *except* nnaida1 fails global clocks 6
      Temperatures ok (See attachment 10)

12:21 BigRips start run 0178
      AIDA file end of R16_536
      BRIKEN start run file 35
      System wide checks all ok *except* nnaida1 fails global clocks 6
      ASIC load check ok

12:43 Biases and leakages are ok (See attachment 11)
      
13:20 BigRips run 0179
      AIDA halfway through R16_551
      BRIKEN start run file 36
      System wide checks all ok *except* nnaida1 fails global clocks 6

13:39 bigRips run 0180
      AIDA file end of R16_555

14:44 System wide checks all ok *except* nnaida1 fails global clocks 6
      ASIC load check ok
      Temperatures all ok (See attachment 12)
      Biases and leakage currents ok (see attachment 13)

15:14 BigRips is stopped
      AIDA file R16_579

15:16 BigRips started run 0181
      AIDA file  end of R16_579

15:24 BRIKEN starts file 37
      AIDA file 3/4 of R16_581

16.18 BigRIPS file 0182.
      Just after start of R16_595.
      BRIKEN file 38 starts @ 16.21.

16.55 All system-wide checks ok except nnaida1 fails global clocks 6.
      Temps, bias and leakage currents (see attachment 14) all ok.
      
17.18 BigRIPS run 0183.
      ~1/2 way through R16_609.
      BRIKEN run 39.

18.27 BigRIPS file 0184 started. Start of R16_627.

18.31 Beam stopped at F11 for stripped foil change. Very end of R16_628.

18.38 Beam returned to F11. 1.3GB through R16_630.
      BigRIPS file 0185.
      BRIKEN run 40.

19.15 System-wide checks as previously.

19.38 BigRIPS file 0186. End of R16_654

19.43 BRIKEN file 41 started.

20.48 BigRIPS file 0187 started for 30Ne tuning.
      BRIKEN will not be taking data.

20:50 AIDA stopped on file R16_663
      Stopped as end of 39Na and the start of the BigRIPS sweep of settings.

20:52 BigRips starting with 30Ne

20:53 Started AIDA file R17. Centring beam along ZDS.
      F11 rate ~50cps. All variable degrader in (19mm).
  
20.58 BigRIPS file 0188 started.   

21.04 30Ne setting started. BigRIPS file 0189 started.

21.20 30Ne stopped for 31Ne centring. BigRIPS file 0190.

21.27 BigRIPS file 0191 started for 31Ne yield measurement. 
      (JLT has spoken with operators and it seems up until now beam has been stopped at F7. We are taking this to be the
case unless advised otherwise.)

21.59 BigRIPS file 0192 started on 32Ne yield setting. Beam to F11.

22.01 R17 stopped and R18 started.

22.05 32Ne setting finished.
      R18 stopped.
      
22.19 BigRIPS file 0194 started for 34Ne setting.
      AIDA run R19 started.
      BRIKEN run 43.
      Currently 10mm degrader but LISE predicts everything should pass through.

22.43 Degrader changed to 19mm Al at start of R19_6.
      LISE predicts implants in DSSD#2.

23.23 Beam stopped to F11. 1.8 GB into R19_15.

23.25 Beam returned to F11. 1GB into R19_16.
      BigRIPS file 0195.
      Degrader reduced to 16.8mm Al.

02:02 Recovered DAQ from crash. Merger became clogged and the system required a full restart. Raspberry pi also
required a restart to regain control of the USB power relay.
      AIDA R16 started
      BigRips on run 0143 which started at 01:19
      BRIKEN run 2

      Biases and leakage currents ok see attachment 1
      Screenshots attached for good events, sync, pause and resume (attachments 2-5)

02:23 BigRips started run 0144
      AIDA on run R16_5
      BRIKEN run 3

02:47 All system wide checks ok

03:25 BigRips Run 0145
      AIDA run R16_22 begins at 03:26
      BRIKEN run 4
      All system wide checks ok

04:00 Biases and leakage currents ok (attachment 6)

04:25 BigRips has stopped. AIDA run R16_37
      brief stop in beam time as Shunji got access to the area and removed the fixed degrader.
      In the hope that we were stopping ions before they reached AIDA.
      It is now attached to the furthest upstream variable degrader.

04:29 bigRips run 0146
      AIDA run R16_38
      BRIKEN run 5
      System wide checks ok, ASICS settings checked

05:31 BigRips beam stopped. Carbon foil change
      AIDA file run R16_54
      BRIKEN also stopped
      Was running with 13mm of Al. Switching to 11mm of Al degrader.

05:41 BigRips start Run 0147
      AIDA file R16_57 starts at 05:52
      BRIKEN run 6
      System wide checks all ok.

06:00  Bias and leakages ok (see attachment 7)

06:26  System wide checks ok

06:43 BigRips stopped their run.
      AIDA currently on R16_73. Still running even after LN2 fill.

07:17 BigRips start run 0148
      AIDA run R16_81
      BRIKEN run 7
      System wide checks and ASIC load all ok

07:42 Bias and leakage currents ok (see attachment 8)

08:22 System wide checks all ok

08:36 BigRips started run 0149
      AIDA file R16_104

08:41 BRIKEN run 8

09.30 System-wide checks all ok.
      Leakage currents ok (see attachment 10).

09.43 BigRIPS run 0150 starts. Corresponds to the beginning of R16_125.

10.35 System-wide checks all ok. nnaida1 still fails clock status check, but bit 2 is set.
      Leakage currents ok.
      R16_141.

10.44 BigRIPS run 0151 starts. Corresponds to the end of R16_142.

11.40 System-wide checks all ok. nnaida1 still fails clock status check, but bit 2 is set.
      Leakage currents ok.
      R16_141.

11.45 BigRIPS run 0152 starts. Corresponds to end of R16_159

12.00 Leakage currents all ok (see attachment 11).

12.47 PE16/R16_178
      BRIKEN file 11
      BigRIPS run0153

12.50 System wide checks OK *except* nnaida1 fails global clocks 6
      ASIC check control

13.41 1.8.H and 1.8.W spectra

13.43 System wide checks OK *except* nnaida1 fails global clocks 6

14.03 BigRIPS run 0154.
      Roughly start of R16_199.

14.21 BigRIPS run 0155.
      Start of R16_204.

14.50 System-wide checks all passed except nnaida1 fails global clocks 6.
      Leakage currents ok.
      
15.23 Beam off. ~Half way through R16_220.
      Degrader reduced from 11mm to 8mm.
      Previously no pulser visible in p-side FEEs. Jiggled pulser cabling and pushed all LEMO connectors in.
      Pulser no visible in 1.8.L for all p-side FEEs.

15.28 Beam returned. End of R16_221.
      BigRIPS file 0156.

15:40 STQ problem so beam stopped near start of R16_225.

16.05 Beam returned to F11. 1.7G into R16_231.
      BigRIPS file 0157
      BRIKEN file 15
      System-wide checks all passed except nnaida1 fails global clocks 6.
      Leakage currents ok.

17.20 BigRIPS file run0158

17.38 Bias & leakage currents OK - see attachments 16-17
      FEE64 temperatures OK - see attachment 18

      Statistics - good events, AIDA disc, SYNC, PAUSE, RESUME, correlation L - see attachments 19-24
      Merge statistics - see attachments 25-26

17.40 System wide checks OK *except* nnaida1 fails global clocks 6

18.21 BigRIPS run0159
      AIDA R16_269
      BRIKEN file 17

18.44 System wide checks OK *except* nnaida1 fails global clocks 6

19.31 BigRIPS run0160
      AIDA R16_288
      BRIKEN file 18

19.55 System wide checks OK *except* nnaida1 fails global clocks 6

20.22 BigRIPS run0161
      AIDA R16_300
      BRIKEN file 19
      Degrader 8mm Al (unchanged)

21.32 BigRIPS run0162
      AIDA R16_318
      BRIKEN file 20
      Degrader 8mm Al (unchanged)

21.32 Bias & leakage currents OK - see attachments 27-28
      FEE64 temperatures OK - see attachment 29

21.38 System wide checks OK *except* nnaida1 fails global clocks 6

22.16 BigRIPS run0163
      AIDA R16_329
      Degrader 8mm Al (unchanged)

22.30 System wide checks OK *except* nnaida1 fails global clocks 6

22.33 AIDA synchronised - R16_333 - see attachment 30

23.07 BigRIPS run0163
      AIDA R16_341
      BRIKEN 
      Degrader 8mm Al (unchanged)

23.28 ASIC settings 2017Mar27-16.12.39

      BNC PB-4 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us
      frequency 25Hz range
      polarity-
      tail pulse, delay MIN

23.35 System wide checks OK *except* nnaida1 fails global clocks 6 

23.28 Analysis of data fileR16_347 - see attachment 31

23.48 daid on shift.

The ~/.cshrc was modified to change the MIDAS path for a convenient analysis method, but it should be done in a shell script instead, as it pushes the MIDAS BASE to all instances 
of MIDAS, such as the Run Control, etc.

As we did not want to log out, and the X session is setting these globally somehow (unexpected) then I did a temporary hack.

The directory we did not want, MIDAS@aidas.240215 was moved to MIDAS@aidas.240215.hacking

Then a symbolic link called MIDAS@aidas.240215 was created to point at MIDAS@aidas

We should remember to undo this later and fix the situation.

For BigRIPS run numbers, they are available online: http://bripscnt01.rarfadv.riken.jp/runsum/index.php

21:30 AIDA and BRIKEN are ready to go -- so we closed the door and asked the BigRIPS team to send the beam to
F11.  It will take about 30 minutes as they want to recalibrate one of the Faraday cups.

22:09: Beam is coming to F11.  AIDA sub-run R13_17 is running at 22:10 so nearly the same time.
     BigRIPS run number 0140
     BRIKEN file name 170329_2213_40Mg Run 0.  It is started at 22:13.  R13_18 for AIDA
     See attachment 1 for biases.


23:12:  We notice that BigRIPS began the run 0141 at 23:08
     AIDA subrun R13_36 began about or near 23:07 or 23:08
     BRIKEN run number 170329_2313_40Mg Run 1
     All system-wide checks passed (excepting nnaida6 clock status which is a known issue)
     Statistics rates look reasonable, except that the nnaida 16 23 24 are even higher than before when the beam
was off (~200k)
 
23:59 - AIDA crashed.  Merger stopped.  When attempting to stop the run, the following error is displayed:

STATE for nnaida1 returned with an error
error: SOAP http transport timed out after 20000 ms
NONE
error: SOAP http transport timed out after 20000 ms
    while executing
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"

We kill off the merge and tape server.

DAQ itself comes back after a reset.  Attempting to open the tape service, however, yields an error

Cannot issue more Access Tokens
 ClaimTapeServer returned:- 
3 Capability table is full.

30.3.2017

0:56 When attempting to bring AIDA back up, eventually nnaida10 was not showing merger data before enabling the
ASIC readout data.  On the run control, nnaida10 consistently showed that its data transfer was not enabled. 
Attempting to reset etc., then eventually issuing Go would drop all the data transfers.

After a power cycle by the standard method, essentially the problem persists, except that it is nnaida 7 8 9 10
(the whole block) which shows the problem where we cannot get the enabled data transfer to stick.

What has happened here?

Power cycle of FEE64s 
24x authenticated mount request c. 20.56

Followed by repeat for nnaida20 following DHCP activity c. 21.00

Mar 29 20:56:44 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:44 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:45 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:45 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:46 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:46 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:46 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.13:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:47 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:48 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:48 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:48 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:48 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:48 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:48 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:49 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:49 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)
Mar 29 20:56:49 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)


Mar 29 21:00:43 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:11 via p2p2
Mar 29 21:00:43 aidas1 dhcpd: DHCPOFFER on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Mar 29 21:00:43 aidas1 dhcpd: DHCPREQUEST for 10.1.2.20 (10.1.2.250) from 00:04:a3:2a:d0:11 via p2p2
Mar 29 21:00:43 aidas1 dhcpd: DHCPACK on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Mar 29 21:00:43 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.20:686 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Mar 29 21:01:08 aidas1 rpc.mountd[2812]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)

16:21

Chris noticed that when the degraders that are at the beam right position when they are "out" may not be fully removed from the beamline.  It's difficult to make a good 
measurement, but it looks like several cm (~3 cm?).

The degrader that moves out to the beam left side has its inner-most edge roughly flush with the square opening of the polyethylene wall.

It does not seem that the issue is about the slider's center position.  This we checked yesterday and within the judgement of our eyes and limited viewing angle, several people 
independently confirmed that the center of the degrader slider is near the true center of BRIKEN and AIDA with respect to the beam axis.  It appears to be an issue of the 
slider's total track length.  Also it should be noted that the degraders are installed in a somewhat asymmetric way, so the consideration of one opening side of the degraders 
when fully open and another isn't fully out may not be germane.

16:44

We shifted the center of the degrader slider to be about less 1 cm to the beam right.  So now the degraders a bit more symmetric as far as their inner edges are related to the 
opening in the polyethylene wall.

As for the Pb wall, its opening is ~10.5 cm.  The "window" in the Pb wall is slightly shifted to the beam left side.  The left side is ~5.5 cm from the center, where as the right 
side is <5.5 cm from the center.

This is not, I think, a new observation.

Following FEE64 power cycles we sometimes observe delayed ( ~5-15 minutes ) authenticated mount requests
as the FEE64s mount their root filesystem from the AIDA server aidas1 - see attachment 1. 

There also appears to be an instance of a *missing* authenticated mount request - nnaida10 at 19.51

So this is *a* (but probably not *the*) cause of FEE64 timeouts observed following a FEE64 power cycle
and then waiting 10 minutes before attempting to start the MIDAS DAQ.


I have noticed that these issues appear to be significantly worse when we are using NTFS-mounted USB disks
to backup data from the AIDA server internal disks. Indeed, performance in general is noticeably slower when
using the NTFS-mounted USB disks.

Currently, we attempt to mitigate these issues by either throttling rsync or nice'ing cp. 

Analysis of Mar2017/R3_0 ... R3_9 by MIDASsort

*** ENTRY finish

 *** data items: ********** ( -48528.10 Hz)
 *** ADC events:  908055140 (  26136.76 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:       162 old count:       162 dt:  50309.28 s  LEC rate:      0.00 Hz
 *** DSSSD # 2 count:        69 old count:        69 dt:  50309.28 s  LEC rate:      0.00 Hz
 *** DSSSD # 3 count:        62 old count:        62 dt:  50309.28 s  LEC rate:      0.00 Hz
 *** DSSSD # 4 count:        70 old count:        70 dt:  50309.28 s  LEC rate:      0.00 Hz
 *** DSSSD # 5 count:        53 old count:        53 dt:  50309.28 s  LEC rate:      0.00 Hz
 *** DSSSD # 6 count:        62 old count:        62 dt:  50309.28 s  LEC rate:      0.00 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:  50309.28 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt:  50309.28 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:  50309.28 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:  50309.28 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:  50309.28 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt:  50309.28 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

Background run (pulser off) with slow comparator thresholds ~1000keV
to check for intrinsic and extrinsic alpha activity in DSSSDs # 1-6
- see attachments 1-4 & 8

Spectra show alpha events distributed across the active areas of all 
DSSSDs - DSSSD #1 has largest number of alpha events

Analysis routine implantdecay.f, spectrum titles and sort variables
- see attachments 5-7

Note change of FEE64 configuration cf. September-December 2016.

08.02 DAQ halted overnight

      System checks OK *except* for nnaida1 global clocks error 6 and some SYNC errors - see attachments 1-5

08.05 Biases & leakage currents OK - see attachments 6-7
      Ambient temperature +23.6 deg C, d.p. -3.2 deg C, RH 16.6%
      Julabo FL11006 set point +20 deg C actual +20.0 deg C
      FEE64 temperatures OK - see attachment 8

08.08 Soft reset 

08.14 PE16/R5

      Test response of AIDA DAQ to LN2 refill cycle

      ASIC settings 2017Mar27-16.12.39

      BNC PB-4 

      Amplitude 90,000
      attenuator x5 IN
      t_r 50ns tau_d 50us
      frequency 25Hz range
      polarity -
      delay MIN, tail pulse

08.15 DAQ OK - no sync errors, merger & tapeserver OK - at start of LN2 fill cycle

08.25 DAQ OK - no sync errors, merger & tapeserver OK - at end of LN2 fill cycle reported by SN (actually first
valve closing)

08.47 PE16/R5 ends OK

aidas1> ~/td/analyser/analyser /TapeData/PE16/R5_8
 *** TDR format 3.3.0 analyser - TD - October 2016
 *** ERROR: READ I/O error:       5002
                   blocks:       3117
          ADC data format:   25180761 ( 1032182.6 Hz)
        Other data format:     243324 (    9974.1 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:          4 (       0.2 Hz)
                               RESUME:          4 (       0.2 Hz)
                              SYNC100:     223299 (    9153.2 Hz)
                           FEE64 disc:      19744 (     809.3 Hz)
                             MBS info:        273 (      11.2 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        372 (      15.2 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:       24.396 s
 FEE  elapsed dead time(s) elapsed idle time(s)
  1                0.000                0.000
  2                0.000                0.000
  3                0.000                0.000
  4                0.000                0.000
  5                0.000                0.000
  6                0.010                0.000
  7                0.000                0.000
  8                0.000                0.000
  9                0.000                0.000
 10                0.000                0.000
 11                0.000                0.000
 12                0.000                0.000
 13                0.000                0.000
 14                0.000                0.000
 15                0.000                0.000
 16                0.032                0.000
 17                0.000                0.000
 18                0.000                0.000
 19                0.000                0.000
 20                0.000                0.000
 21                0.000                0.000
 22                0.000                0.000
 23                0.050                0.052
 24                0.032                0.000
 25                0.000                0.000
 26                0.000                0.000
 27                0.000                0.000
 28                0.000                0.000
 29                0.000                0.000
 30                0.000                0.000
 31                0.000                0.000
 32                0.000                0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS     
Other   HEC Data
  0          0          0          0          0          0          0          0          0          0         
0          0
  1    1515272      10040          0          0          0          0       9306        734          0         
0         22
  2    1865767      10389          0          0          0          0       9306       1083          0         
0          0
  3     747909      10149          0          0          0          0       9307        842          0         
0          0
  4     219072       9941          0          0          0          0       9306        635          0         
0          2
  5     990462      10121          0          0          0          0       9307        814          0         
0          0
  6    1169560      10176          0          0          1          1       9302        599        273         
0          4
  7     501892       9945          0          0          0          0       9307        638          0         
0          0
  8     443446      10086          0          0          0          0       9306        780          0         
0         26
  9    1146021       9904          0          0          0          0       9307        597          0         
0          0
 10    1079867      10446          0          0          0          0       9306       1140          0         
0          0
 11     231978      10103          0          0          0          0       9305        798          0         
0          0
 12     323199       9939          0          0          0          0       9306        633          0         
0          0
 13     669310      10234          0          0          0          0       9302        932          0         
0          0
 14     807685       9898          0          0          0          0       9305        593          0         
0        111
 15    1824230      10367          0          0          0          0       9305       1062          0         
0          0
 16    1918844      10136          0          0          1          1       9295        839          0         
0          0
 17    1203907      10012          0          0          0          0       9307        705          0         
0          0
 18    1650085      10349          0          0          0          0       9306       1043          0         
0          0
 19     583697      10367          0          0          0          0       9305       1062          0         
0          0
 20     474353       9969          0          0          0          0       9307        662          0         
0        176
 21     216947      10564          0          0          0          0       9307       1257          0         
0         26
 22     996462       9999          0          0          0          0       9306        693          0         
0          0
 23    2580229      10036          0          0          1          1       9288        746          0         
0          5
 24    2020567      10154          0          0          1          1       9295        857          0         
0          0
 25          0          0          0          0          0          0          0          0          0         
0          0
 26          0          0          0          0          0          0          0          0          0         
0          0
 27          0          0          0          0          0          0          0          0          0         
0          0
 28          0          0          0          0          0          0          0          0          0         
0          0
 29          0          0          0          0          0          0          0          0          0         
0          0
 30          0          0          0          0          0          0          0          0          0         
0          0
 31          0          0          0          0          0          0          0          0          0         
0          0
 32          0          0          0          0          0          0          0          0          0         
0          0

 *** Timewarps
 FEE       ADC      Pause     Resume    SYNC100       Disc        MBS  Undefined    Samples
  0          0          0          0          0          0          0          0          0
  1          0          0          0          0          0          0          0          0
  2          0          0          0          0          0          0          0          0
  3          0          0          0          0          0          0          0          0
  4          0          0          0          0          0          0          0          0
  5          0          0          0          0          0          0          0          0
  6          0          0          0          0          0          0          0          0
  7          0          0          0          0          0          0          0          0
  8          0          0          0          0          0          0          0          0
  9          0          0          0          0          0          0          0          0
 10          0          0          0          0          0          0          0          0
 11          0          0          0          0          0          0          0          0
 12          0          0          0          0          0          0          0          0
 13          0          0          0          0          0          0          0          0
 14          0          0          0          0          0          0          0          0
 15          0          0          0          0          0          0          0          0
 16          0          0          0          0          0          0          0          0
 17          0          0          0          0          0          0          0          0
 18          0          0          0          0          0          0          0          0
 19          0          0          0          0          0          0          0          0
 20          0          0          0          0          0          0          0          0
 21          0          0          0          0          0          0          0          0
 22          0          0          0          0          0          0          0          0
 23          0          0          0          0          0          0          0          0
 24          0          0          0          0          0          0          0          0
 25          0          0          0          0          0          0          0          0
 26          0          0          0          0          0          0          0          0
 27          0          0          0          0          0          0          0          0
 28          0          0          0          0          0          0          0          0
 29          0          0          0          0          0          0          0          0
 30          0          0          0          0          0          0          0          0
 31          0          0          0          0          0          0          0          0
 32          0          0          0          0          0          0          0          0

 *** Program elapsed time:    2.078s ( 1499.910 blocks/s,  93.744 Mb/s)

Data synchronisation OK - see attachment 

08.58 LJ informs me that second valve (LN2 refill cycle has closed) 
      No sync errors

13.53 DAQ stopped since PE16/R5 test this morning
      Now observe sync errors cf.baseline but sync check OK - see attachments 10-17

14:10 DAQ Started Run 6 Attached screenshots of statistics for good events, sync, pause and resume (See
attachments 18-21)

14.15 PE16/R6

      First beam from ZDS 
      A/q ~ 40/12 
      No fixed degrader
      Variable degrader 1.8mm W + 3mm Al
      Very low rate of heavy ions (~10/h ?) and 'light' particles

09.13 DAQ run R3 ends OK (final file R3_9)
      
      ASIC settings 2017Mar27-16.12.39
      slow comparator 100 (dec)
      LEC/MEC fast comparator 255 (dec)
      BNC PB-4 pulser OFF

09.20 Biases & leakage currents OK - see attachments 1 & 2
      Ambient temperature +23.8 deg C, d.p. -3.5 deg C, RH 15.7%
      Julabo FL11006 set point +20 deg C actual +20.0 deg C

09.32 FEE64 temperatures OK - see attachment 3

09.39 System-wide checks OK except
      ADC calibration fails nnaida21 & 23
      SYNC errors not counted since baseline
      SYNC pulses received
      see attachments 4-8

13.36 PE16/R1

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate ~250Hz 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39

      see attachment 9

13.52 PE16/R2

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 10,000 - 2,000 @ 2,000 step

      see attachment 10

14.03 PE16/R3

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 2,000 - 8,000 @ 2,000 step, 10,000 - 50,000 @ 10,000 step

      see attachment 11

20.30 System-wide checks
      All OK *except* clock status - nnaida1 global clocks failed 6 - see attachment 12

20.35 PE16/R4

      Background

      BNC PB-4 OFF

      ASIC settings 2017Mar27-16.12.39

      MACB master mode 5 (external 50MHz clock from Tektronix AFG3102C)

20.40 Biases & leakage currents OK - see attachments 13 & 14
      Ambient temperature +23.6 deg C, d.p. -3.2 deg C, RH 16.6%
      Julabo FL11006 set point +20 deg C actual +20.0 deg C
      FEE64 temperatures OK - see attachment 15

20.50 PE16/R4 ends OK

11:28 Biases and leakages okm (see attachment 1)

14:00 Removed jumpers on cooling rack D. Noise was around 50 channels worse (FWHM of pulser peak) for all
backside channels.

14:30 Jumpers back on cooling rack D.

16.45 Screenshots of layouts 1-4, 7-8 illustrating state of play
      attachment 2 - FEE64 # 1-24 Rate
                 3 -       "      HitRate
                 4 - p+n 1.8.L
                 5 - n+n 1.8.L
                 6 & 7 - p+n 1.8.W
                 8 & 9 - n+n 1.8.W

17.30 Attachments 10-14 statistics good events, sync, pause, resume, correlation L

17.36 Attachment 15 - FEE64 temperatures OK

Clock settings for this experiment are slightly different than in the previous case.

Below are strictly the settings for the waveform generator itself.

Sent to AIDA side: 0 to 5 V amplitude, 50 MHz frequency

Sent to BRIKEN side: 0 to 5 V amplitude, 25 MHz frequency

Thus, both teams are taking TTL-type signals.  However, the BRIKEN one goes to the Philips module which essentially converts it straight away to NIM.

There may have been a slight misunderstanding yesterday about the setup, but finally the waveform signal going to BRIKEN was checked and there was no problem.  So we don't make 
any changes (e.g. changing the waveform generator to a NIM-type output).

10.30 Left DAQ running overnight to look for alphas in DSSDs.
      DSSD bias still ok @ 23.3oC (see att. 1).
      FEE temps ok.

      Slow and fast comparator thresholds set to 0x60 (~1Mev).
      No obvious alphas (see att. 2+3).

11.00 Looked at waveforms and see long ripple (period ~10us) in a lot of the FEEs, e.g. nnaida15 in attachment 4.

10.00 Investigating DSSD2 (MSL BB18-1000 3058-9) missing channels, found broken bond wires on rear side (~1/4).
      Replaced with 3058-3.
      Stack order now:
            |   3058-4
      beam  |   3058-3
            |   2998-23
            |   3058-5
            |   3058-6
            V   3058-7

12.00 All detectors, including the new replacement bias correctly (see att. 1).

14.00 Shunji has mentioned moving AIDA+BRIKEN forward by ~1m due to concerns about focusing the accurately at such a rearward position.
      The afternoon was spent removing the EURICA rails to enable the push forward of AIDA+BRIKEN.

18.00 The DAQ was set running with the new detector included. All system checks passed apart from nnaida19 ADC calibration.
      Pulser peak widths are mostly ~70-90ch for all FEEs. This is similar to Tuesday for the n-side FEEs (att. 2-4) and an improvement for the p-side FEEs (att. 5-7).
      Having said that, some spectra show peaks with shoulders or tails and a few feature multiple discreet peaks.
      We will look at this over the next couple of days, depending on when the final move/alignment of AIDA+BRIKEN is completed.

      Complete table of pulser FWHM

       nnaida# | Pulser FWHM (ch) |  Comments
          1    |       64         |
          2    |       168        |  Peak has shoulder
          3    |       77         |
          4    |       74         |
          5    |       79         |  Shoulder
          6    |       86         |  Shoulder
          7    |       80         |
          8    |       78         |
          9    |       68         |
          10   |       70         |
          11   |       80         |
          12   |       85         |
          13   |       70         |
          14   |       65         |
          15   |       92         |  Wide secondary peak in ASICs 1&4 of FWHM ~900ch @ 45k. Only few counts high (~1% height of pulser peak). Noise 10x height of pulser.
          16   |       99         |  Noise peak ~10x height of pulser peak.
          17   |       70         |  Low E tail.
          18   |       75         |
          19   |       96         |
          20   |       83         |
          21   |       68         |  Additional peaks either side of pulser: approx. relative heights > (1/30) (1) (1/100)
          22   |       69         |
          23   |       108        |  Noise peak ~10x height of pulser peak.
          24   |       110        |  Noise peak ~10x height of pulser peak.

10.00 Powered system on and biased.
      Bias voltages and leakage currents ok (see att. 1). Ambient temp @23.1oC.
      
14.00 Shunji wanted to do some checks with the LN2 fill.
      Seems to perhaps be a problem with unshielded cables to the valve switches.
      With control box, outlet valve and cables to all valves behind LN2 tank, AIDA survives LN2 fill.
      Parts ordered to facilitate moving of components behind the LN2 tank, away from AIDA.
      Will carry out further tests once these have been fitted.

17.00 FWHM seem reasonable and similar to Dec 2016.
      n-side FEEs see average pulser FWHM of ~70-80ch. nnaida19 noticeably worse @ ~150ch. (att. 2+3)
      p-side FEEs worse with average pulser FWHM of ~200ch. nnaida13 worst of these, showing non-Gaussian peaks
with widths @ ~300ch. (att. 4+5)
      Will not attempt to solve this now as they must all be disconnected to sort problem with nnaida1.

T9 test setup at Daresbury was powered up and noise levels were checked using a pulser peak.

A 1V peak was used. For most channels this corresponded to a peak position at around +-11000 from the zero point at 9000.

An example of this is shown in attachment 1 showing the peak in nnaider 11, ASIC 4, ADC 11.

It was also observed that for both nnaider 11 and 12 (FEE modules corresponding to negative signals) that channels 2, 56 and 59 were not contributing to the rate. See attachment 2.

Upon investigating the missing channels ADC spectra the only apparent issue appeared in nnaida 11 ASIC 4, ADC 8. Which is plot 4.7.L. Here we see the peak much higher coming in at around channel 63000. See attachment 3.
The remaining missing channels in the rate plot appear to have normal amplitudes with maybe slightly higher noise. FWHM of ~60 as oppposed to ~18. Discussed more below.

Also done was a noise measurement across the all the ASICs. To do this an ADC was chosen belonging to each of the ASICs and the pulser peak location and FWHM was recorded. The reaults are as shown below.

FEE#	ASIC/ADC	Centroid Location	FWHM
 11       1.8             42951                19.38
 11       2.8             41012                17.48
 11       3.8             41929                20.01
 11       4.8             41302                17.88
 12       1.8             41830                17.38
 12       2.8             41119                16.01
 12       3.8             42669                18.30
 12       4.8             41811                15.21
 13       1.8             24329                15.05
 13       2.8             24034                13.64
 13       3.8             24209                15.79
 13       4.8             24607                13.29
 14       1.8             24650                16.19
 14       2.8             24618                14.12
 14       3.8             23934                15.04
 14       4.8             22584                14.36
 14       4.8             22584                14.36

It was seen that the noise was fairly low which is to be expected as there were no dtectors connected and only a short length of kapton cables connected to the board.

Five modules are being returned to RIKEN after repair.

The MAC addresses are :-

00:04:a3:2a:ED:8f 

00:04:a3:2a:f6:d4

00:04:a3:2b:22:6e

00:04:a3:2b:33:15

00:04:a3:2a:d0:1a

00:04:a3:2b:33:0c

00:04:a3:2a:b6:45

00:04:a3:2a:b2:b2

00:04:a3:2b:09:da

00:04:a3:2b:11:c5

There appears to be significant common mode noise on the output of the
CAEN N1419 4 Ch Reversible 500 V/200 µA NIM HV Power Supply Module (USB)
- the specification quotes 'Max Ripple smaller than < 5mVpp'. We configure
the CAEN N1419 outputs as floating wrt NIM module/crate chassis.

For example, attachment 1, shows the output of module #2 (Addr 01) channel #3
(unused channel) set to 10V (leakage current 0.030uA) - core (Ch 1)/braid (Ch 2).
Tektronix 3034C channels 1 & 2 are both set ac/1M.

Attachment 2 shows math function Ch 1 - Ch 2 (50mV/division cf. 200mV/division
for Ch 1 and Ch 2)

Attachment 3 shows CAEN N1419 #2 settings

Attachment 4 per attachments 1 & 2 *except* the cables from channels 0 and 1
of CAEN N1419 #2 have been disconnected from the NIM module. The structure of
the common mode noise changes but its amplitude remains significant. This
presumably indicates that there are other sources of common mode noise in
addition to that observed at the output of the CAEN N1419 HV outputs.

Attachments 5 & 6 show the NIM crate front panel +6V output wrt ground
for the lower (NIM Bin type REPIC,  BNC PB-4, Ortec 433, 2x MACB, 2x CAEN N1419,
1x CAEN 1419B) and upper (NIM Bin type OKEN, 9x MACB) AIDA NIM bins respectively.
All +/-24V, +/-12V and +/-6V front panel outputs show the same noise structure.

Attachment 7 shows equivalent of attachment 6 but using Tektronix DPO3054
which can display FFT.

Update -----------------------------------------
Tested the CAEN HV supply in T9 using the same method and observed similar results.

With help from Mos Kogimtzis a better method of measuring the HV noise was used.
The co-ax from the isolated output of the HV module was connected to one input of the 'scope. HV set to 1V.
Thus the screen of the HV signal is grounded at the 'scope amplifier input. This nearer to how the HV is used with a detector. 
The single signal input channel was set to DC 1MR with an offset of 1V.
The 'scope can now display at 4mV/division. 
The peak/peak was less than 5mV.See attachment 8 slide 1

There are features at both high and low frequency, attachments slides 2 and 3. NB 1mV/division.

If a differential measurement is required then a suitable cable with a shielded twisted pair is needed.

Update #2 -----------------------------------------
Moved the AIDA T9 HV supply to a CAEN NIM bin. Newly purchased this year.
This is the only module in the bin.
 Used the simple method of noise measuring as before with the same cables and 'scope.
Attachment 9 shows there is a different type of noise. Not regular like attachment 8 but more random and larger.

The HV is set to 1V.

Further investigation will be carried out using AC coupling and HV set to 50V.

Not something we were not aware of already but /var/log/messages illustrate the issue.

Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.8:713 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida8 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.6:819 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida6 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.4:964 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida4 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.18:698 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida18 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.7:668 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida7 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.5:855 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida5 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:02 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.17:726 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida17 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.10:676 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida10 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.16:881 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida16 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.12:813 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida12 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.11:855 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida11 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.14:761 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida14 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.9:814 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida9 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.13:803 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida13 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.15:803 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:06 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.19:821 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida19 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:07 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.22:747 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida22 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:07 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.1:920 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida1 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:07 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.23:810 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida23 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:07 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.20:780 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:07 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.24:805 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida24 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:13:07 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.21:694 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida21 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:14:57 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:57 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:57 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:57 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:57 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:58 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.13:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:58 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:58 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:58 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:14:59 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:00 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:01 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:01 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:03 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:15:58 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.2:1018 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:16:51 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:17:06 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.3:785 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida3 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:17:47 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)
Dec  6 11:18:55 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.15:893 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Dec  6 11:19:35 aidas1 rpc.mountd[2926]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)

11.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      Ambient temperature +24.8 deg C, d.p. +3.6 deg C, RH 25.4%

14.40 Latest version of leakage curent spreadsheet - see attachment 4
      https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=1357176413

18.30 DSSSD bias OFF
      FEE64 power OFF
      AIDA withdrawn from BRIKEN (CH2)n moderator
      BNC PB-4 pulser OFF
      NIM bins OFF
      Julabo FL11006 chiller OFF
      3 phase ac power OFF
      ac power OFF and disconnected 
      USB-controlled ac mains relay removed for mod/update

MACB configuration can be found at https://elog.ph.ed.ac.uk/AIDA/357

To investigate system-wide check clock status errors for nnaida5, 7, 8, 15 & 16
PJCS requests changing MACB #3 (5, 6, 13 & 14) mode from 3 to 0 (all other MACB
modes unchanged) followed by power-cycle of FEE64s

System-wide checks - see attachments 1-11
 No clock status errors observed for nnaida5
 N.B. nnaida23 fails clock status

Switch MACB #3 (7, 8, 15 & 16) from mode 0 to 3, and MACB #4 from 3 to 0
------------------------------------------------------------------------
System-wide checks - see attachments 12-21
 ReSync not complete for nnaida21, 22
 Clock status errors observed for 5, 7, 8, 15, 16 *and* 21, 22

Switch MACB #4 (21, 22, 29 & 30) from mode 0 to 3, and MACB #5 (7, 8, 15 & 16) from 3 to 0
------------------------------------------------------------------------------------------
System-wide checks - see attachments 22-28
 ReSync not complete for nnaida7, 8, 15 & 16
 Clock status errors observed for nnaida7, 8, 15 & 16 - status = 0

Switch MACB #5 (21, 22, 29 & 30) from mode 0 to 3 
-------------------------------------------------
System-wide checks - see attachments 29-33
 ReSync OK
 Clock status errors observed for nnaida5, 7, 8, 15 & 16 - status = various, bit 2 always set (as before)

Replace MACB #5 (was rev A, MACB serial #9) with MACB serial #13 (rev A, firmware 16.4.15) mode 3
-------------------------------------------------------------------------------------------------
System-wide checks - see attachments 34-36
 ReSync OK
 Clock status errors observed for nnaida5, 7, 8, 15 & 16 - status = various, bit 2 always set (as before)
 i.e. no change, MACB #5 NIM module not the problem

Replace MACB #1 (was rev B, MACB serial #21) with MACB serial #38 (rev B, firmware 16.4.15, internal CLK TERM
mod) mode 0
-------------------------------------------------------------------------------------------------------------------------
System-wide checks - see attachments 37-40
 ReSync OK
 *ALL* system-wide checks OK


Offline analysis of file Dec2016/R1_5 demonstrates ADC & disc data synchronised - see attachments 41 & 42

19.50 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures HIGH - see attachment 3
       FL11006 E01 low fluid level (actual halfway between minimum and middle visual markers)
       water topped up to just below maximum visual marker and FL11006 restarted  - see attachment 4
      Ambient temperature +25.6 deg C, d.p. +7.2 deg C, RH 31.1%

20.25 Leakage current spreadsheet appended - see attachment 5
      https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=1357176413

The SyncCheck etc software used for the RIBF123R1 and RIBF03R1 commissioning
tests on d05 (user aida) has been archived as

aidas1:/homes/npg/SyncCheck/SyncCheck-d05-041216.tar.gz
aidas1:/homes/npg/SyncCheck/DataPackage-d05-041216.tar.gz
aidas1:/homes/npg/SyncCheck/ribfts-d05-041216.tar.gz

DAQ SETUP sometimes produces Javascript error instead of a pop-up displaying
the status of the ReSync - see attachment 1

Re-run ReSync by selecting 'Perform ReSync' from 'Master Timestamp Control' 

12.45 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      Ambient temperature +25.1 deg C, d.p. -3.0 deg C, RH 15.6%

14.05 per FEE64 Rate, Hitrate, 1*L and 1*W spectra, good events stats - see attachments 4-10
      Note - good events stats indicate increased extrinsic noise (c. 100kHz period) during these screenshots

14.15 1*W and 4*W spectra for nnida24, 17 & 20 - see attachments 11-16
      Note - nnida24 ASIC#1 probably has cable/connector fault at DSSSD end

19.48 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      Ambient temperature +25.1 deg C, d.p. -3.0 deg C, RH 15.6%

I wrote this LISE++ file based on the Takechi .lpp modified by AE for 77Ni, 78Ni, 76Ni.

Basically, I changed the primary beam to 48Ca, reduced the production target thickness to 1 mm (I think it may
be correct), inserted the carbon target at F8, and made the RIB as 41Al and had it calculate the optics.  Then I
modified by hand D7 and D8 Brho settings to like 6.32 Tm which is something near the correct value (for plastic,
but I forget for carbon, slightly different perhaps?)

Then I make a fairly arbitrary dE-ToF plot (attachment 1) without any concern for what data it thinks is filling
the plot, and run the Monte Carlo simulation.

This may give a user some kind of naive picture of what sorts of ions we might expect, with a basic clue about
their relative intensity or improbability to detect.

I did this work in literally about 5 minutes total, so do not take it too seriously.  It is definitely not
right, but it is not totally nonsense either.  You can play with the .lpp file (attachment 2) if you want to
improve it.  You should definitely get the degraders used within BigRIPS correctly.  I imagine they are much thicker, because D6 being 8.42 Tm is much too high (it was more like 
7.5 Tm or so?)  The other things you can (and should) add is things at F11 like our degraders, AIDA, and so on.  I heard Gabor might do this at some point, but he may have become 
very busy with other tasks.

Attachment 3 shows some relative intensities numerically.  Again, you should not really trust this.
      However, let's take some known experimental values.
      I recall that at the BigRIPS F11 Pla. scaler, when we did the 41Al unreacted measurement, it was about 30 cps = 108000 counts per hour
      I think we had about several counts per hour of 40Mg in the best case reaching to F11.
      It means that 41Al and 40Mg ratio is around order 10^5 difference.
      Surprisingly, this is nearly the same as the results of this quick LISE++ simulation (attachment 3 has numbers)

F8 target measurements, for posterity.

Plastic: ~39 to 40 mm

Carbon: 20. mm

F8 targets, for posterity.

Plastic: 39~40 mm

Carbon: 20. mm

Analysis of background, pulser off

S O R T    C O M P L E T E ..... Fri Dec  2 17:11:14 2016


 *** ENTRY finish

 *** data items:  261088000 (  94096.36 Hz)
 *** ADC events:   27335403 (   9851.71 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5742802 old count:   5732397 dt:    247.48 s  LEC rate:  23205.52 Hz
 *** DSSSD # 2 count:   5336197 old count:   5326542 dt:    247.48 s  LEC rate:  21562.51 Hz
 *** DSSSD # 3 count:   2888673 old count:   2883342 dt:    247.48 s  LEC rate:  11672.55 Hz
 *** DSSSD # 4 count:   2581418 old count:   2576776 dt:    247.48 s  LEC rate:  10431.00 Hz
 *** DSSSD # 5 count:   2086882 old count:   2083032 dt:    247.48 s  LEC rate:   8432.68 Hz
 *** DSSSD # 6 count:   3432165 old count:   3425579 dt:    247.48 s  LEC rate:  13868.70 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:    247.48 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt:    247.48 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:    247.48 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:    247.48 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:    247.48 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt:    247.48 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Fri Dec  2 17:12:28 2016

R45_17 as the test file, which was closed at 9.02 AM Friday, December 2nd at the end of the official parasitic
machine time on Fallon et al.

===Summarized results===
Initial file is 2.0 GB of AIDA data

LZMA: 862M; Time: 23 min
BZ2: 1.3G; Time: 6.5 min
GZ: 1.3G; Time: 3 min

The LZMA results are about as I expected: fantastic compression but it takes a very long time to pack the data.
 The BZ2 data are a bit surprising; usually it can be about 10 or 15% smaller than GZ for hexdata from my
experience.  I conclude that we should use GZ (which we are already doing, but now we confirm that it is
optimized for time versus disk space usage).

15.49 We are continuing to compress the data.  Presently we are somewhere around R39_20, sequentially.  I
estimated that there are 578 runs remaining, and naively say each is 2 GB (some at the end of RXX_ may be less).  

Compression at 3 minutes each then takes 29 hours, so it should be finished by tomorrow evening, say around
20:00 or a little later, depending on the fluctuation.

===Full details of the test===


npg@aidas1 ~/benchmarks % ls -altr
total 2048024
-rw-r--r--.  1 npg npgstaff 2097152000 Dec  2 13:58 R45_17
drwxrwxr-x. 55 npg users          4096 Dec  2 14:01 ..
drwxr-xr-x.  2 npg npgstaff       4096 Dec  2 14:01 .

First test with lzma

npg@aidas1 ~/benchmarks % time tar cvf R45_17.lzma --lzma R45_17
R45_17
tar cvf R45_17.lzma --lzma R45_17  1388.10s user 15.63s system 100% cpu 23:13.94 total
npg@aidas1 ~/benchmarks % ls -altrh
total 2.8G
-rw-r--r--.  1 npg npgstaff 2.0G Dec  2 13:58 R45_17
drwxrwxr-x. 55 npg users    4.0K Dec  2 14:08 ..
-rw-r--r--.  1 npg npgstaff 862M Dec  2 14:31 R45_17.lzma
npg@aidas1 ~/benchmarks % 

as expected, the compression quality is very good (> 50%) but this is much to slow to be practical.

next we can attempt bz2 

npg@aidas1 ~/benchmarks % time tar cvjf R45_17.tar.bz2 R45_17
R45_17
tar cvjf R45_17.tar.bz2 R45_17  375.22s user 6.68s system 97% cpu 6:31.74 total
npg@aidas1 ~/benchmarks % ls -altrh
total 4.1G
-rw-r--r--.  1 npg npgstaff 2.0G Dec  2 13:58 R45_17
-rw-r--r--.  1 npg npgstaff 862M Dec  2 14:31 R45_17.lzma
-rw-r--r--.  1 npg npgstaff  737 Dec  2 14:31 results.txt
drwxrwxr-x. 55 npg users    4.0K Dec  2 14:32 ..
-rw-------.  1 npg npgstaff  12K Dec  2 14:33 .results.txt.swp
drwxr-xr-x.  2 npg npgstaff 4.0K Dec  2 14:34 .
-rw-r--r--.  1 npg npgstaff 1.3G Dec  2 14:40 R45_17.tar.bz2


npg@aidas1 ~/benchmarks % ls -altrh
total 4.1G
-rw-r--r--.  1 npg npgstaff 2.0G Dec  2 13:58 R45_17
-rw-r--r--.  1 npg npgstaff 862M Dec  2 14:31 R45_17.lzma
-rw-r--r--.  1 npg npgstaff  737 Dec  2 14:31 results.txt
drwxrwxr-x. 55 npg users    4.0K Dec  2 14:32 ..
-rw-------.  1 npg npgstaff  12K Dec  2 14:33 .results.txt.swp
drwxr-xr-x.  2 npg npgstaff 4.0K Dec  2 14:34 .
-rw-r--r--.  1 npg npgstaff 1.3G Dec  2 14:40 R45_17.tar.bz2
npg@aidas1 ~/benchmarks % time tar cvzf R45_17.tar.gz R45_17
R45_17
tar cvzf R45_17.tar.gz R45_17  188.01s user 6.53s system 100% cpu 3:13.98 total

npg@aidas1 ~/benchmarks % time tar cvzf R45_17.tar.gz R45_17
R45_17
tar cvzf R45_17.tar.gz R45_17  188.01s user 6.53s system 100% cpu 3:13.98 total
npg@aidas1 ~/benchmarks % ls -altrh
total 5.4G
-rw-r--r--.  1 npg npgstaff 2.0G Dec  2 13:58 R45_17
-rw-r--r--.  1 npg npgstaff 862M Dec  2 14:31 R45_17.lzma
-rw-r--r--.  1 npg npgstaff  737 Dec  2 14:31 results.txt
drwxrwxr-x. 55 npg users    4.0K Dec  2 14:32 ..
-rw-r--r--.  1 npg npgstaff 1.3G Dec  2 14:40 R45_17.tar.bz2
drwxr-xr-x.  2 npg npgstaff 4.0K Dec  2 14:44 .
-rw-r--r--.  1 npg npgstaff 1.3G Dec  2 14:47 R45_17.tar.gz
-rw-------.  1 npg npgstaff  12K Dec  2 14:50 .results.txt.swp


conclusion is gzip is the best as for time efficiency.

00.07 BigRIPS data file 1135

01.07 BigRIPS data file 1136.

02.09 BigRIPS data file 1137.

02.13 Beam off. ~1/2 way through R44_137

02.16 Beam back. ~600MB into R44_139
      BigRIPS data file 1138.

03.17 BigRIPS data file 1139.

03.37 Beam stopped. End of R44_167.

03.43 Beam returned to F11. ~700MB through R44_170.
      BigRIPS data file 1140.

04.00 Beam off for stripper foil change. End of R44_175.

04.06 Beam returned to F11. 1.2GB into R44_178.
 
04.08 BigRIPS data file 1141.

05.09 BigRIPS data file 1142.

06.02 BigRIPS data fill 1143.

06.26 R44 stopped @ R44_227 ahead of LN2 fill.

07.02 BigRIPS data file 1144.

07.43 Run R45 started.

08.02 BigRIPS data file 1145.

08.05 Local Elog and BigRIPS log uploaded (attachments 3-6).

09.00 Machine time ended, the last data file is R45_18

13.40 Biases are shown as attachments 7 and 8

15.04 DAQ starts (RIBF03R1/R46)
      Pulser walkthrough
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns tau_d 50us
      frequency 250Hz range
      polarity -, tail pulse, delay MIN

15.19 Walk through finishes.  See attachments 9 and 10 for histograms

15.26 DAQ starts (RIBF03R1/R47)
      Pulser walkthrough
      Amplitude 12,000 - 2,000 @ 2,000 step

15.35 R47_2 finishes.
      See attachments 11 and 12 for histograms

15.41 DAQ starts (RIBF03R1/R48)
      Background - BNC PB-4 pulser OFF

16.35 DAQ stops OK (RIBF03R1/R48_13)

16.55 DSSSD bias & leakage currents Ok - see attachment 13 & 14
      Ambient temperature +25.2 deg C, -4.2 deg C, RH 14.2%

     Variable degrader setting is now #2 + #3: 0.3 mm W + 1.0 mm W [+2 mm Al]
     Centre ZDS @ 40Mg

     ADC & disc data synchronised


S O R T    C O M P L E T E ..... Thu Dec  1 18:15:11 2016


 *** ENTRY finish

 *** data items:  261088000 ( 105051.06 Hz)
 *** ADC events:   36442207 (  14662.84 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5340742 old count:   5338849 dt:    304.98 s  LEC rate:  17511.91 Hz
 *** DSSSD # 2 count:   4962731 old count:   4960982 dt:    304.98 s  LEC rate:  16272.43 Hz
 *** DSSSD # 3 count:   2885062 old count:   2884042 dt:    304.98 s  LEC rate:   9459.91 Hz
 *** DSSSD # 4 count:   2336560 old count:   2335778 dt:    304.98 s  LEC rate:   7661.41 Hz
 *** DSSSD # 5 count:   2003149 old count:   2002489 dt:    304.98 s  LEC rate:   6568.18 Hz
 *** DSSSD # 6 count:   3645726 old count:   3644468 dt:    304.98 s  LEC rate:  11954.07 Hz
 *** DSSSD # 1 count:        56 old count:        56 dt:    304.98 s  HEC rate:      0.18 Hz
 *** DSSSD # 2 count:        62 old count:        62 dt:    304.98 s  HEC rate:      0.20 Hz
 *** DSSSD # 3 count:        87 old count:        87 dt:    304.98 s  HEC rate:      0.29 Hz
 *** DSSSD # 4 count:        60 old count:        60 dt:    304.98 s  HEC rate:      0.20 Hz
 *** DSSSD # 5 count:        37 old count:        37 dt:    304.98 s  HEC rate:      0.12 Hz
 *** DSSSD # 6 count:         9 old count:         9 dt:    304.98 s  HEC rate:      0.03 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Thu Dec  1 18:16:30 2016

Bigrips run 1127

AIDA run 43_ 33 to 43

Offline analysis of AIDA R42_32.

Degrader condition of F11 is with the same stopping power of e.g. R42_7 (see https://elog.ph.ed.ac.uk/AIDA/509).
     5 mm Al between MUSIC 1 and MUSIC 2
     3. + 0.2 = 3.2 mm Al on the upstream side of the PE wall
     Pb wall between MUSIC 1 and MUSIC 2 was reduced from 7.5 cm gap to ~6.5 mm gap (beam right side pushed in 1
cm, so asymmetric)
     (Variable degrader system remains unchanged with 1,2,3 in: 0.5 mm W + 0.3 mm W + 1.0 mm W (+3 mm Al backings))

 *** data items:  261088000 ( 118111.81 Hz)
 *** ADC events:   36442207 (  16485.84 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5340742 old count:   5338849 dt:    304.98 s  LEC rate:  17511.91 Hz
 *** DSSSD # 2 count:   4962731 old count:   4960982 dt:    304.98 s  LEC rate:  16272.43 Hz
 *** DSSSD # 3 count:   2885062 old count:   2884042 dt:    304.98 s  LEC rate:   9459.91 Hz
 *** DSSSD # 4 count:   2336560 old count:   2335778 dt:    304.98 s  LEC rate:   7661.41 Hz
 *** DSSSD # 5 count:   2003149 old count:   2002489 dt:    304.98 s  LEC rate:   6568.18 Hz
 *** DSSSD # 6 count:   3645726 old count:   3644468 dt:    304.98 s  LEC rate:  11954.07 Hz
 *** DSSSD # 1 count:        56 old count:        56 dt:    304.98 s  HEC rate:      0.18 Hz
 *** DSSSD # 2 count:        62 old count:        62 dt:    304.98 s  HEC rate:      0.20 Hz
 *** DSSSD # 3 count:        87 old count:        87 dt:    304.98 s  HEC rate:      0.29 Hz
 *** DSSSD # 4 count:        60 old count:        60 dt:    304.98 s  HEC rate:      0.20 Hz
 *** DSSSD # 5 count:        37 old count:        37 dt:    304.98 s  HEC rate:      0.12 Hz
 *** DSSSD # 6 count:         9 old count:         9 dt:    304.98 s  HEC rate:      0.03 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Thu Dec  1 11:06:21 2016

See attached histograms.  

Figure 1: The time structure of low energy events seems more normalized with a flat-top and similar intensity as
like R41_2 (see i.e. https://elog.ph.ed.ac.uk/AIDA/507 ) rather than R42_32, though one wonders if this is a
real effect or if R42_7 was somehow unusual.

Figure 2: We can confirm that the number of real events corresponding to light ions seems reduced compared to
R42_7 Fig 4.

Figure 5: Distribution in XY of low gain [heavy ion / high energy] is still weighted to the right hand side as
usual, but seems slightly more homogeneous than previous cases such as R42_7.  This is corroborated by the
scalers pasted above, where the implant rate to DSSD#3 is about 0.3 Hz rather than 0.4 Hz of R42_7; this is
probably a real decrease and not merely a statistical effect as R41_2 also shows around 0.4 Hz.  I conclude that
heavy ion implant rate is reduced by about 1/3 from R42_7, most probably from the Pb bricks cutting some
fraction of the beam (though in theory it could be from shifting 5 mm of the Al degrader up stream by ~2 m and
the angular straggling of the heavy ions in the plate).

Specific comparison of the implant rates show we are dropping 0.1 cps on DSSD#2, 0.1 cps on DSSD#3, and maybe 0.05 Hz
(it's a sensible number or not different than zero?) in DSSD#4, which can give an idea of what ion species are being
cut out if we looked at the BigRIPS PID correlated with AIDA implantation.

Checking that the implantation is still reasonable after LN2 fill recovery. 

Degrader condition is 8. + 0.2 mm Al on the upstream side of the PE wall.

All three variable degraders are in (0.5 mm W; 0.3 mm W; 1.0 mm W, each on 1 mm Al backing). 

Confirmed degrader settings at 10.11 (right before a change was made after this run...)

 *** data items:  261088000 ( 125355.46 Hz)
 *** ADC events:   32885891 (  15789.41 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5369750 old count:   5351200 dt:    283.23 s  LEC rate:  18958.97 Hz
 *** DSSSD # 2 count:   4958223 old count:   4941299 dt:    283.23 s  LEC rate:  17505.99 Hz
 *** DSSSD # 3 count:   2872405 old count:   2862650 dt:    283.23 s  LEC rate:  10141.59 Hz
 *** DSSSD # 4 count:   2367926 old count:   2359880 dt:    283.23 s  LEC rate:   8360.43 Hz
 *** DSSSD # 5 count:   2063809 old count:   2056797 dt:    283.23 s  LEC rate:   7286.69 Hz
 *** DSSSD # 6 count:   3582944 old count:   3570809 dt:    283.23 s  LEC rate:  12650.29 Hz
 *** DSSSD # 1 count:        61 old count:        61 dt:    283.23 s  HEC rate:      0.22 Hz
 *** DSSSD # 2 count:        82 old count:        82 dt:    283.23 s  HEC rate:      0.29 Hz
 *** DSSSD # 3 count:       111 old count:       111 dt:    283.23 s  HEC rate:      0.39 Hz
 *** DSSSD # 4 count:        71 old count:        71 dt:    283.23 s  HEC rate:      0.25 Hz
 *** DSSSD # 5 count:        42 old count:        42 dt:    283.23 s  HEC rate:      0.15 Hz
 *** DSSSD # 6 count:         9 old count:         9 dt:    283.23 s  HEC rate:      0.03 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Thu Dec  1 09:11:23 2016

See attached histograms
 

Figure 5 shows low energy front and back, and if I compare to R41_2 offline analysis (i.e. https://elog.ph.ed.ac.uk/AIDA/507 ) then we see more fluctuation (of light ions?) it seems. Run 41_2 seems to show mostly noise (anti correlation) and here we see real ions (positive correlation.  This is confirmed in our figure 4, where the statistics of DSSD#3 seems about doubled.  The event rate per unit time in 41_2 shows a relatively flat top behavior characteristic of noise domination, where as our present one shows more jitter that could be characterized by light ion production and transport variation.

00.51 BigRIPS data file 1112.

01.50 BigRIPS data file 1113.

02.55 BigRIPS data file 1114.

03.56 BigRIPS data file 1115.

04.58 BigRIPS data file 1116.

05.57 BigRIPS data file 1117.

06.26 Stopped run R41 @R41_126 ahead of LN2 fill.
      Bias and leakage currents ok (attachments 1+2).
      BRIKEN files 161130_1942_183.dlt to 161130_1942_197.dlt

06.54 BigRIPS data file 1118.

(DK arrives)

07.44 R42 started following LN2 fill. (BRIKEN computer had some problems, delaying restart.)
      No synchronisation with BRIKEN during R42_0.
      Re-sync pulse issued and synchronisation obtained 1.2GB into R42_0.

7.55 Big RIPS run 1119

(CG departs)

8.55 Big RIPS run 1120: corresponds roughly to AIDA R42_15

circa 9.00: Offline analysis of present condition: https://elog.ph.ed.ac.uk/AIDA/509

09.55 BigRIPS data file 1121

10.00 Beam is stopped for changing stripper foil.  Nearly at the end of R42_27.
     Previously there was 8. + 0.2 mm of Al on the upstream side of the PE wall
     Pb bricks between MUSIC 1 and MUSIC 2 had the width reduced from 7.5 cm by ~1 cm compression on the beam
right side
        So the total gap in this location should be 
     Now we have 5 mm Al between MUSIC 1 and MUSIC 2.  
     3. mm and 0.2 mm Al is on the upstream side of PE wall.
     (Total thickness of Al degraders is not changed, only the distribution of the material around F11.)
     (Variable degraders are not moved: 0.5 mm W + 0.3 mm W + 1.0 mm W (+3 mm Al backing))

10.08 BigRIPS data file 1122
10.09 Beam returns: 1.3 GB into R42_29

circa 12:00: offline analysis of present condition: https://elog.ph.ed.ac.uk/AIDA/510

11.09 BigRIPS data file 1123

(TD arrives, DK to lunch)

12.09 BigRIPS data file 1124

12.42 DAQ stops (RIBF03R1/R42_68) - overloaded /data10 filesystem sshd/rsync + rm 
      Unable to soft reset, power cycle FEE64s

13.11 DAQ starts (RIBF03R1/R43)
      ASIC settings 2016Nov29-21.38.02

13.18 BRIKEN issues multiple syncs - attempting to reset correlation scalers

13.21 BigRIPS data file 1125

13.25 Correlation scalers now reset, SyncCheck OK 
      AIDA data file R43_2
      BRIKEN data file 205
      BigRIPS 1125 (circa 13.21)
      15 cps at BigRIPS scaler F11 plastic; network camera for ZDS scaler has 55 cps

(DK return, TD to lunch and PAC)

15.26 BigRIPS setting changes from 40Mg setting to unreacted 41Al setting.
      About half way in AIDA R43_27
      BigRIPS #1127
      F11 plastic at BigRIPS scaler is about 30 cps (doubled from before)
      Brho settings:
        D6 7.3989 Tm
        D7 6.2253 Tm
        D8 6.2405 Tm

16.25 Operator calls.  The beam is stopped.  They don't specify for how long and we don't know the exact
technical reason without native Japanese speaker
      Phone rang in the beginning near AIDA R43_41

16.33 They put back the disable access radiation control...beam returns soon?

16.43 R43_47 run in AIDA, beam comes back.
      F11 scint scaler of BigRIPS shows around 30 cps as before.  (network camera scaler from ZDS shows about 80
cps)
      BigRIPS data file 1128

16.58 Naive estimation of the energy loss difference of 40Mg and 41Al from different optics settings
      Use D8 Brho of 6.3208 Tm of R21_0
         40Mg energy after 8mm Al: 125 MeV/u
         41Al "       "     "   ": 140 MeV/u
      Use D8 Brho of 6.2405 Tm as above for the present settings
         40Mg energy after 7 mm Al: 125 MeV/u
         41Al energy after 6.5 mm Al: 142 MeV/u
      So, neglecting other stopping materials, the difference between implantation depths could be about 1 or 2
SSD layers towards the front of AIDA.

17.08 R43_53 removed variable degrader #1 (0.5 mm W [+1 mm Al])
      Variable degrader setting is now #2 + #3: 0.3 mm W + 1.0 mm W [+2 mm Al]

17.14 SyncCheck OK
      BRIKEN data file 210
      AIDA data file R43_55

17.28 DSSSD bias & leakage currents OK - see attachments 3 & 4
      FEE64 temperatures OK - see attachment 5
      Visual scalers - see attachment 6
      good events statistics - see attachment 7
      System wide checks OK *except* nnaida13 fails ADC calibration and variable number of nnaida5, 7, 8, 15 & 16
fail clock status - bit 2 always set

17.49 BigRIPS data file 1129
      Centre ZDS @ 40Mg
      Change degrader to (8mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al, 1mm W/1mm Al) variable

17.53 SyncCheck OK
      AIDA data file R43_64
      BRIKEN data file 211

18.24 DAQ stops OK (RINF03R1/R43_71) 
      Ready for LN2 refill sequence

18.56 BigRIPS data file 1130

19.32 DAQ starts (RIBF03R1/R44)

19.35 SyncCheck OK
      BRIKEN data file 213
      AIDA data file R44_1
      ASIC settings 2016Nov29-21.38.02
      Degrader (8mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al + 1mm W/1mm Al) variable

19.57 BigRIPS data file 1131  

20.54 beam off for stripper foil change

21.04 1.8.W spectra -see attachments 8 & 9
      good events stats - see attachment 10
      Varying levels of 100kHz period extrinsic noise for FEE64s nnaida17, 18, 19 & 23

21.06 Back back
      SyncCheck OK
      BigRIPS data file 1132
      AIDA data file R44_31
      BRIKEN data file 214

21.55 SyncCheck OK

22.05 BigRIPS data file 1133

22.15 System-wide checks OK *except* nnaida13 fails ADC calibration and variable # of nnaida5, 7, 8, 15 & 16 fail
clock status - status bit 2 always set

23.04 BigRIPS data file 1134 

Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm/1mm Al + 1mm W/1m Al) variable

Steering to F11 changed by PD

S O R T    C O M P L E T E ..... Wed Nov 30 20:27:12 2016


 *** ENTRY finish

 *** data items:  261088000 ( 113119.60 Hz)
 *** ADC events:   38225290 (  16561.58 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   4817030 old count:   4801683 dt:    315.38 s  LEC rate:  15273.57 Hz
 *** DSSSD # 2 count:   4859831 old count:   4845346 dt:    315.38 s  LEC rate:  15409.28 Hz
 *** DSSSD # 3 count:   2756459 old count:   2748047 dt:    315.38 s  LEC rate:   8740.03 Hz
 *** DSSSD # 4 count:   2366728 old count:   2359885 dt:    315.38 s  LEC rate:   7504.29 Hz
 *** DSSSD # 5 count:   1834069 old count:   1828597 dt:    315.38 s  LEC rate:   5815.36 Hz
 *** DSSSD # 6 count:   3545853 old count:   3535021 dt:    315.38 s  LEC rate:  11242.99 Hz
 *** DSSSD # 1 count:        77 old count:        77 dt:    315.38 s  HEC rate:      0.24 Hz
 *** DSSSD # 2 count:        72 old count:        72 dt:    315.38 s  HEC rate:      0.23 Hz
 *** DSSSD # 3 count:       128 old count:       127 dt:    315.38 s  HEC rate:      0.41 Hz
 *** DSSSD # 4 count:        98 old count:        97 dt:    315.38 s  HEC rate:      0.31 Hz
 *** DSSSD # 5 count:        66 old count:        66 dt:    315.38 s  HEC rate:      0.21 Hz
 *** DSSSD # 6 count:        16 old count:        16 dt:    315.38 s  HEC rate:      0.05 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Wed Nov 30 20:28:24 2016

cd /TapeData/RIBF03R1
~/td/a.out R31 10000 > /tmp/R31.out
~/td/a.out R31 24 > /tmp/R31-2.out
~/td/a.out R42 24 > /tmp/R42.out

[update added 14.00JST Friday 2 December]

aidas1> ~/td/a.out R41 24
Starting Correlation Check Program
 Number of SYNCs is 24 
 File R41_0 opened for read success

Sync Time Incorrect Count=1 ; FullTime=BCF284400A0 ; Last_SyncTime=0 
Missing sync_tally = 1 ;  paused_modules = 0 ; SYNCs since complete => 
0 => 0 ;1 => 1 ;2 => 1 ;3 => 1 ;4 => 1 ;5 => 1 ;6 => 1 ;7 => 1 ;8 => 1 ;9 => 1 ;10 => 1 ;
11 => 1 ;12 => 1 ;13 => 1 ;14 => 1 ;15 => 1 ;16 => 1 ;17 => 1 ;18 => 1 ;19 => 1 ;20 => 1 ;
21 => 1 ;22 => 1 ;23 => 1 ;24 => 1 ;
Difference Error 1 : ScalarIs 0x29E99A88,Was 0x0, Diff=0x29E99A88 | Now ScalarTime=0xBCF62EBD1C0, Last ScalarTime=0x0, 
Diff=0xBCF62EBD1C0 Scalar < Time =  0x0, Last_SyncTime = BCF62E800A0
Scalar gone backwards 2733 : ScalarIs 0x16758F,Was 0x1C3DFAE72, Diff=0xFFFFFFFE3C36C71D | Now ScalarTime=0xBD5CB5DD8E0, Last 
ScalarTime=0xBD5CAC42168, Diff=0x99B778 Scalar < Time =  0x0, Last_SyncTime = BD5CB5C00A0
Difference Error 2733 : ScalarIs 0x16758F,Was 0x1C3DFAE72, Diff=0xFFFFFFFE3C36C71D | Now ScalarTime=0xBD5CB5DD8E0, Last 
ScalarTime=0xBD5CAC42168, Diff=0x99B778 Scalar < Time =  0x0, Last_SyncTime = BD5CB5C00A0
 File R41_1 opened for read success
Scalar gone backwards 4167 : ScalarIs 0x142CEC,Was 0xD7337698, Diff=0xFFFFFFFF28E0B654 | Now ScalarTime=0xBD9286B9480, Last 
ScalarTime=0xBD927D1DD04, Diff=0x99B77C Scalar < Time =  0x0, Last_SyncTime = BD9286800A0
Difference Error 4167 : ScalarIs 0x142CEC,Was 0xD7337698, Diff=0xFFFFFFFF28E0B654 | Now ScalarTime=0xBD9286B9480, Last 
ScalarTime=0xBD927D1DD04, Diff=0x99B77C Scalar < Time =  0x0, Last_SyncTime = BD9286800A0
 File R41_2 opened for read success
 File R41_3 opened for read success
 File R41_4 opened for read success
 File R41_5 opened for read success
 File R41_6 opened for read success
 File R41_7 opened for read success
 File R41_8 opened for read success
 File R41_9 opened for read success
 File R41_10 opened for read success
 File R41_11 opened for read success
 File R41_12 opened for read success
 File R41_13 opened for read success
 File R41_14 opened for read success
 File R41_15 opened for read success
 File R41_16 opened for read success
 File R41_17 opened for read success
 File R41_18 opened for read success
 File R41_19 opened for read success
 File R41_20 opened for read success
 File R41_21 opened for read success
 File R41_22 opened for read success
 File R41_23 opened for read success
 File R41_24 opened for read success
 File R41_25 opened for read success
 File R41_26 opened for read success
 File R41_27 opened for read success
 File R41_28 opened for read success
 File R41_29 opened for read success
 File R41_30 opened for read success
 File R41_31 opened for read success
 File R41_32 opened for read success
 File R41_33 opened for read success
 File R41_34 opened for read success
 File R41_35 opened for read success
 File R41_36 opened for read success
 File R41_37 opened for read success
 File R41_38 opened for read success
 File R41_39 opened for read success
 File R41_40 opened for read success
 File R41_41 opened for read success
 File R41_42 opened for read success
 File R41_43 opened for read success
 File R41_44 opened for read success
 File R41_45 opened for read success
 File R41_46 opened for read success
 File R41_47 opened for read success
 File R41_48 opened for read success
 File R41_49 opened for read success
 File R41_50 opened for read success
 File R41_51 opened for read success
 File R41_52 opened for read success
 File R41_53 opened for read success
 File R41_54 opened for read success
 File R41_55 opened for read success
 File R41_56 opened for read success
 File R41_57 opened for read success

Sync Time Incorrect Count=6853176 ; FullTime=D71712400A0 ; Last_SyncTime=D71711C00A0 
Missing sync_tally = 1 ;  paused_modules = 0 ; SYNCs since complete => 
0 => 0 ;1 => 2 ;2 => 2 ;3 => 2 ;4 => 2 ;5 => 2 ;6 => 2 ;7 => 2 ;8 => 2 ;9 => 2 ;10 => 2 ;
11 => 2 ;12 => 2 ;13 => 2 ;14 => 2 ;15 => 2 ;16 => 2 ;17 => 2 ;18 => 2 ;19 => 2 ;20 => 2 ;
21 => 2 ;22 => 2 ;23 => 2 ;24 => 2 ;
 File R41_58 opened for read success
 File R41_59 opened for read success
 File R41_60 opened for read success
 File R41_61 opened for read success
 File R41_62 opened for read success
 File R41_63 opened for read success
 File R41_64 opened for read success
 File R41_65 opened for read success
 File R41_66 opened for read success
 File R41_67 opened for read success
 File R41_68 opened for read success
 File R41_69 opened for read success
 File R41_70 opened for read success
 File R41_71 opened for read success
 File R41_72 opened for read success
 File R41_73 opened for read success
 File R41_74 opened for read success
 File R41_75 opened for read success
 File R41_76 opened for read success
 File R41_77 opened for read success
 File R41_78 opened for read success
 File R41_79 opened for read success
 File R41_80 opened for read success
 File R41_81 opened for read success
 File R41_82 opened for read success
 File R41_83 opened for read success
 File R41_84 opened for read success

Sync Time Incorrect Count=10082274 ; FullTime=E3687D000A0 ; Last_SyncTime=E3687C800A0 
Missing sync_tally = 1 ;  paused_modules = 0 ; SYNCs since complete => 
0 => 0 ;1 => 2 ;2 => 2 ;3 => 2 ;4 => 2 ;5 => 2 ;6 => 2 ;7 => 2 ;8 => 2 ;9 => 2 ;10 => 2 ;
11 => 2 ;12 => 2 ;13 => 2 ;14 => 2 ;15 => 2 ;16 => 2 ;17 => 2 ;18 => 2 ;19 => 2 ;20 => 2 ;
21 => 2 ;22 => 2 ;23 => 2 ;24 => 2 ;
 File R41_85 opened for read success
 File R41_86 opened for read success
 File R41_87 opened for read success
 File R41_88 opened for read success
 File R41_89 opened for read success
 File R41_90 opened for read success
 File R41_91 opened for read success
 File R41_92 opened for read success
 File R41_93 opened for read success
 File R41_94 opened for read success
 File R41_95 opened for read success
 File R41_96 opened for read success
 File R41_97 opened for read success
 File R41_98 opened for read success
 File R41_99 opened for read success
 File R41_100 opened for read success
 File R41_101 opened for read success
 File R41_102 opened for read success
 File R41_103 opened for read success
 File R41_104 opened for read success
 File R41_105 opened for read success
 File R41_106 opened for read success
 File R41_107 opened for read success
 File R41_108 opened for read success
 File R41_109 opened for read success
 File R41_110 opened for read success
 File R41_111 opened for read success
 File R41_112 opened for read success
 File R41_113 opened for read success
 File R41_114 opened for read success
 File R41_115 opened for read success
 File R41_116 opened for read success
 File R41_117 opened for read success

Sync Time Incorrect Count=14013263 ; FullTime=F26758800A0 ; Last_SyncTime=F26758000A0 
Missing sync_tally = 1 ;  paused_modules = 0 ; SYNCs since complete => 
0 => 0 ;1 => 2 ;2 => 2 ;3 => 2 ;4 => 2 ;5 => 2 ;6 => 2 ;7 => 2 ;8 => 2 ;9 => 2 ;10 => 2 ;
11 => 2 ;12 => 2 ;13 => 2 ;14 => 2 ;15 => 2 ;16 => 2 ;17 => 2 ;18 => 2 ;19 => 2 ;20 => 2 ;
21 => 2 ;22 => 2 ;23 => 2 ;24 => 2 ;
 File R41_118 opened for read success
 File R41_119 opened for read success
 File R41_120 opened for read success
 File R41_121 opened for read success
 File R41_122 opened for read success
 File R41_123 opened for read success
 File R41_124 opened for read success
 File R41_125 opened for read success
 File R41_126 opened for read success
 File R41_127 open failed 

Degrader setting:
Variable degrader:
0.5 mm W + 1 mm Al : in
0.3 mm W + 1 mm Al : in
1 mm W + 1 mm Al : in
Fix degrader:
20mm Al+ 0,2 mm Al

See https://elog.ph.ed.ac.uk/AIDA/502 for comparison

Following degrader change to  (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm/1mm Al + 1mm W/1m Al) variable

S O R T    C O M P L E T E ..... Wed Nov 30 17:13:45 2016


 *** ENTRY finish

 *** data items:  261088000 ( 100256.23 Hz)
 *** ADC events:   35996583 (  13822.47 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5336829 old count:   5326852 dt:    298.81 s  LEC rate:  17860.09 Hz
 *** DSSSD # 2 count:   4841097 old count:   4831789 dt:    298.81 s  LEC rate:  16201.09 Hz
 *** DSSSD # 3 count:   3210523 old count:   3204385 dt:    298.81 s  LEC rate:  10744.25 Hz
 *** DSSSD # 4 count:   2891968 old count:   2886353 dt:    298.81 s  LEC rate:   9678.19 Hz
 *** DSSSD # 5 count:   1993841 old count:   1989821 dt:    298.81 s  LEC rate:   6672.54 Hz
 *** DSSSD # 6 count:   3671954 old count:   3664989 dt:    298.81 s  LEC rate:  12288.47 Hz
 *** DSSSD # 1 count:        66 old count:        66 dt:    298.81 s  HEC rate:      0.22 Hz
 *** DSSSD # 2 count:       100 old count:       100 dt:    298.81 s  HEC rate:      0.33 Hz
 *** DSSSD # 3 count:       131 old count:       131 dt:    298.81 s  HEC rate:      0.44 Hz
 *** DSSSD # 4 count:        79 old count:        79 dt:    298.81 s  HEC rate:      0.26 Hz
 *** DSSSD # 5 count:        46 old count:        46 dt:    298.81 s  HEC rate:      0.15 Hz
 *** DSSSD # 6 count:        11 old count:        11 dt:    298.81 s  HEC rate:      0.04 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Wed Nov 30 17:15:04 2016

Following target change from (CH2)n to C

Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 1mm W/1m Al) variable

See https://elog.ph.ed.ac.uk/AIDA/499

S O R T    C O M P L E T E ..... Wed Nov 30 15:27:25 2016


 *** ENTRY finish

 *** data items:  261088000 ( 116005.27 Hz)
 *** ADC events:   36396496 (  16171.50 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5261837 old count:   5244729 dt:    302.14 s  LEC rate:  17415.17 Hz
 *** DSSSD # 2 count:   4766457 old count:   4750965 dt:    302.14 s  LEC rate:  15775.61 Hz
 *** DSSSD # 3 count:   2750220 old count:   2741230 dt:    302.14 s  LEC rate:   9102.44 Hz
 *** DSSSD # 4 count:   2371078 old count:   2363331 dt:    302.14 s  LEC rate:   7847.59 Hz
 *** DSSSD # 5 count:   1938346 old count:   1932204 dt:    302.14 s  LEC rate:   6415.37 Hz
 *** DSSSD # 6 count:   3579949 old count:   3568500 dt:    302.14 s  LEC rate:  11848.61 Hz
 *** DSSSD # 1 count:        18 old count:        18 dt:    302.14 s  HEC rate:      0.06 Hz
 *** DSSSD # 2 count:         1 old count:         1 dt:    302.14 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:        13 old count:        13 dt:    302.14 s  HEC rate:      0.04 Hz
 *** DSSSD # 4 count:        37 old count:        37 dt:    302.14 s  HEC rate:      0.12 Hz
 *** DSSSD # 5 count:       110 old count:       110 dt:    302.14 s  HEC rate:      0.36 Hz
 *** DSSSD # 6 count:       144 old count:       144 dt:    302.14 s  HEC rate:      0.48 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Wed Nov 30 15:28:35 2016

Degrader setting was:
Variable degrader:
0.5 mm W + 1 mm Al : in
0.3 mm W + 1 mm Al : out
1 mm W + 1 mm Al : in
Fix degrader:
20mm Al+ 0,2 mm Al

Large portion of the beam is passing through AIDA! We need to change the degrader

Degrader 8mm Al fixed + ( 0.5mm W/1mm Al + 1mm W/1mm Al) variable

S O R T    C O M P L E T E ..... Wed Nov 30 14:41:39 2016


 *** ENTRY finish

 *** data items:  261088000 ( 107267.57 Hz)
 *** ADC events:   36298818 (  14913.31 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5026250 old count:   5011592 dt:    301.12 s  LEC rate:  16691.77 Hz
 *** DSSSD # 2 count:   4868135 old count:   4854528 dt:    301.12 s  LEC rate:  16166.68 Hz
 *** DSSSD # 3 count:   3233592 old count:   3224663 dt:    301.12 s  LEC rate:  10738.50 Hz
 *** DSSSD # 4 count:   2914929 old count:   2906700 dt:    301.12 s  LEC rate:   9680.24 Hz
 *** DSSSD # 5 count:   2009399 old count:   2003732 dt:    301.12 s  LEC rate:   6673.05 Hz
 *** DSSSD # 6 count:   3695168 old count:   3684926 dt:    301.12 s  LEC rate:  12271.36 Hz
 *** DSSSD # 1 count:        24 old count:        24 dt:    301.12 s  HEC rate:      0.08 Hz
 *** DSSSD # 2 count:        12 old count:        12 dt:    301.12 s  HEC rate:      0.04 Hz
 *** DSSSD # 3 count:        39 old count:        39 dt:    301.12 s  HEC rate:      0.13 Hz
 *** DSSSD # 4 count:        94 old count:        94 dt:    301.12 s  HEC rate:      0.31 Hz
 *** DSSSD # 5 count:       152 old count:       152 dt:    301.12 s  HEC rate:      0.50 Hz
 *** DSSSD # 6 count:       131 old count:       131 dt:    301.12 s  HEC rate:      0.44 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Wed Nov 30 14:42:53 2016

Degrader 8mm Al fixed + ( 0.3mm W/1mm Al + 1mm W/1mm Al) variable

ADC & disc data synchronised

S O R T    C O M P L E T E ..... Wed Nov 30 13:53:38 2016


 *** ENTRY finish

 *** data items:  261088000 (  95225.14 Hz)
 *** ADC events:   44184529 (  16115.17 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5050939 old count:   5048005 dt:    362.93 s  LEC rate:  13917.19 Hz
 *** DSSSD # 2 count:   5030612 old count:   5028047 dt:    362.93 s  LEC rate:  13861.19 Hz
 *** DSSSD # 3 count:   2817584 old count:   2815988 dt:    362.93 s  LEC rate:   7763.48 Hz
 *** DSSSD # 4 count:   2482552 old count:   2481283 dt:    362.93 s  LEC rate:   6840.34 Hz
 *** DSSSD # 5 count:   1549349 old count:   1548540 dt:    362.93 s  LEC rate:   4269.03 Hz
 *** DSSSD # 6 count:   3960450 old count:   3958332 dt:    362.93 s  LEC rate:  10912.50 Hz
 *** DSSSD # 1 count:        18 old count:        18 dt:    362.93 s  HEC rate:      0.05 Hz
 *** DSSSD # 2 count:         6 old count:         6 dt:    362.93 s  HEC rate:      0.02 Hz
 *** DSSSD # 3 count:        21 old count:        20 dt:    362.93 s  HEC rate:      0.06 Hz
 *** DSSSD # 4 count:        64 old count:        63 dt:    362.93 s  HEC rate:      0.18 Hz
 *** DSSSD # 5 count:       157 old count:       157 dt:    362.93 s  HEC rate:      0.43 Hz
 *** DSSSD # 6 count:       200 old count:       200 dt:    362.93 s  HEC rate:      0.55 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Wed Nov 30 13:55:06 2016

The main experiment changed to a carbon reaction target at F8 (similar thickness of CH2 previously used), and retuned the ZDS. First BigRIPS run after retuning is 40Mg_1093 (at 2:29 am, Nov 30th)

The background at F11 has increased. The neutron backgroun incresead by a factor of ~10. The rates of visual scalers also increased; for example Si Top/Bottom from about 50 Hz to 300 Hz (see attachment 1).

One possible explanation are higher light particle rate at F11. By comparing the PID for C target (attachment 2) with that of CH2 target setting (e.g. https://elog.ph.ed.ac.uk/AIDA/492), it looks like the new conditions have a higher transmission for A/Q=3 fragments (3H et al). Also, in the new setting the Si isotopes are also transmitted to F11.

The implantation depth is still good; same as we had for C target at F8 (compare 40Al distribution in attachment 3 with what we had before).

00.11 Beam stopped for target @F8 change.
      R35 stopped at R35_62.
      BRIKEN file 161129_1951 155->159
      BigRIPS files 1084-1088.

      Bias and leakage currents ok (attachments 1+2).

00:38 Added 0.2 mm Al fixed degrader. The new target at F8 is 0.9 g/cm2 C, which (according to LISE calculation)
      results in 2.7 MeV/u less energy loss than the previous 0.9 g/cm2 CH2 target.

00:42 Beam returned. R36 started. BigRIPS file 1089.
      Initially out of sync with BRIKEN so reset correlation timestamp @ 01:45 (~1/2 way through R36_0).

02:26 Beam rate at F11 about doubled. Now ~80cps @ F11.
      Previously changing beam spot position, but now 41Al now centred.

02:39 Beam stopped start @ of R36_11.

03.33 Beam returned to F11, centred on 40Mg in ZDS.
      Just after start of R36_22.
      BigRIPS file 1094.

04.35 Beam stopped. ~1/2 way through R36_34.
      Continue running with R36.

06.13 R36 stopped.
      The control module of a power supply of one of the STQs has broken and the accelerator team must contact the
      manufacturer to work out a solution.
      This will take some time (hours or maybe even into tomorrow).

09.36 STQ PSU fixed - beam returns
      BigRIPS data file 1096

10.00 AIDA DAQ soft reset to recover from LN2 fill cycle transient

10.03 DAQ starts (RIBF03R1/R38)
     
      ASIC settings 2016Nov29-21.38.02

      Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 1mm W/1m Al) variable

10.38 BigRIPS data file 1097

10.50 Unable to sync DAQs - appears BRIKEN timestamp is not being reset, AIDA-RIBFDAQ appear to be sync'd

11.16 Looks like BRIKEN gets the sync again.  It's some kind of integer overflow issue?!  Unclear.
      BRIKEN starts the new run.  It is the same time as AIDA R38_14 (about 400 MB into file)

11.43 BigRIPS data file 1098

12.47 BigRIPS data file 1099

13.02 DSSSD bias & leakage currents OK - see attachments 3 & 4
      FEE64 temperatures OK - see attachment 5
      Visual scalers - see attachment 6
      Good events and Merge statistics - see attachments 7-12
      All FEE64s << 100 k data items/s

      Offline analysis of R38_34 shows most events are in DSSSDs #5 & #6

13.20 DAQ stopped OK (RIBF0R1/R38_35)

      Change degrader to (8mm Al) fixed + ( 0.5mm W/1mm Al + 1mm W/1m Al) variable, i.e. additional 0.2mm W

13.21 DAQ starts (RIBF0R1/R39)
      BRIKEN DAQ issues three re-syncs
      SyncCheck OK

13.32 AIDA data file R39_2
      BRIKEN data file 175
      ASIC settings 2016Nov29-21.38.02
      Degrader (8mm Al) fixed + ( 0.5mm W/1mm Al + 1mm W/1m Al) variable
      B-rho changed from 6.384Tm to 6.673Tm overnight => 9.3% energy change
      A=40 ions at F11 change from 145MeV/u to 158MeV/u

14.22 Beam was off to change stripper foil.  Now it is back at F11, around 10 cps at the scint (BigRIPS scaler) or
60 cps at our normal F11 plastic 
     Very nearly the time of R39_12 beginning.
     BigRIPS run 1101

15.25 Offline analysis indicates we need to increase degrader thickness further
      Will add 0.5mm W/1mm Al to change degrader to (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm /1mm Al + 1mm W/1mm Al
) variable

15.30 DAQ continues (RIBF03R1/R39_25)
      BRIKEN data file 178

16.06 BigRIPS data file 1103

16.23 We observed that the degrader was not actually inserted previously as we thought.
     Now it is inserted, so variable degraders 1, 2 and 3: 0.5 mm W (+1 mm Al), 0.3 mm W (+1 mm Al) and 1.0 mm W (+1
mm Al)
     AIDA run is R39_36

17.04 BigRIPS data file 1104

17.53 System-wide checks OK *except* variable # of nnaida5, 7, 8 , 15 & 16 fail clock status - bit 2 always set

18.06 BigRIPS data file 1105

18.21 DAQ stops OK (RIBF03R1/R39_60) in advance of Clover LN2 refill cycle

19.08 BigRIPS data file 1106

19.29 DAQ starts (RIBF03R1/R41_0)
      Steering to F11 changed by PD - attempt to centre implants in DSSSDs

19.30 BigRIPS data file 1107

19.42 AIDA data file R41_2
      BRIKEN data file 183
      ASIC settings 2016Nov29-21.38.02
      Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm W/1mm Al + 1mm W/1m Al) variable

20.00 Visual scalers - see attachment 13

20.27 BigRIPS data file 1108

21.26 Beam lost

21.43 Beam back
      BigRIPS data file 1109
      AIDA data file R41_26
      BRIKEN data file 183

22.47 BigRIPS data file 1110.

23.47 BigRIPS data file 1111.

S O R T    C O M P L E T E ..... Tue Nov 29 20:45:36 2016


 *** ENTRY finish

 *** data items:  261088000 (  86387.95 Hz)
 *** ADC events:   35941414 (  11892.18 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5276204 old count:   5262371 dt:    300.27 s  LEC rate:  17571.70 Hz
 *** DSSSD # 2 count:   4680694 old count:   4668369 dt:    300.27 s  LEC rate:  15588.43 Hz
 *** DSSSD # 3 count:   2774752 old count:   2767324 dt:    300.27 s  LEC rate:   9240.95 Hz
 *** DSSSD # 4 count:   2405451 old count:   2399010 dt:    300.27 s  LEC rate:   8011.04 Hz
 *** DSSSD # 5 count:   1940411 old count:   1935190 dt:    300.27 s  LEC rate:   6462.28 Hz
 *** DSSSD # 6 count:   3578504 old count:   3569034 dt:    300.27 s  LEC rate:  11917.74 Hz
 *** DSSSD # 1 count:        54 old count:        54 dt:    300.27 s  HEC rate:      0.18 Hz
 *** DSSSD # 2 count:        76 old count:        76 dt:    300.27 s  HEC rate:      0.25 Hz
 *** DSSSD # 3 count:       124 old count:       124 dt:    300.27 s  HEC rate:      0.41 Hz
 *** DSSSD # 4 count:       129 old count:       129 dt:    300.27 s  HEC rate:      0.43 Hz
 *** DSSSD # 5 count:        84 old count:        84 dt:    300.27 s  HEC rate:      0.28 Hz
 *** DSSSD # 6 count:        33 old count:        33 dt:    300.27 s  HEC rate:      0.11 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Tue Nov 29 20:47:11 2016

Offline analysis of AIDA data files from R31_0 to c. R31_5 (elapsed time 1120.45s)

Note impact of increased noise ( https://elog.ph.ed.ac.uk/AIDA/494 )on LEC spectra,
particularly for DSSSDs #1 & #2.

*** ENTRY finish

 *** data items: 1231535778 ( 133914.33 Hz)
 *** ADC events:  112061604 (  12185.32 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:  24147717 old count:  24147349 dt:   1120.45 s  LEC rate:  21551.85 Hz
 *** DSSSD # 2 count:  22686292 old count:  22685929 dt:   1120.45 s  LEC rate:  20247.53 Hz
 *** DSSSD # 3 count:  13051178 old count:  13050922 dt:   1120.45 s  LEC rate:  11648.18 Hz
 *** DSSSD # 4 count:  11173273 old count:  11173038 dt:   1120.45 s  LEC rate:   9972.15 Hz
 *** DSSSD # 5 count:   9478275 old count:   9478090 dt:   1120.45 s  LEC rate:   8459.36 Hz
 *** DSSSD # 6 count:  15562532 old count:  15562263 dt:   1120.45 s  LEC rate:  13889.57 Hz
 *** DSSSD # 1 count:       165 old count:       165 dt:   1120.45 s  HEC rate:      0.15 Hz
 *** DSSSD # 2 count:       275 old count:       275 dt:   1120.45 s  HEC rate:      0.25 Hz
 *** DSSSD # 3 count:       523 old count:       523 dt:   1120.45 s  HEC rate:      0.47 Hz
 *** DSSSD # 4 count:       469 old count:       469 dt:   1120.45 s  HEC rate:      0.42 Hz
 *** DSSSD # 5 count:       297 old count:       297 dt:   1120.45 s  HEC rate:      0.27 Hz
 *** DSSSD # 6 count:       118 old count:       118 dt:   1120.45 s  HEC rate:      0.11 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Tue Nov 29 14:18:07 2016

Spectrum s400 displays the frequency of bits 0-47 of the (MBS) 25MHz correlation scaler.

For those bits which can be expected to cycle often within the sampling period we would
expect to observe each bit with equal probability and this is observed for bits 0-31.
Conclude there is no evidence for hardware/firmware problems with the AIDA 25MHz correlation
clock for bits 0-31 and therefore probably not for bits 32-47 either.

I think the SyncCheck issues observed could due to:

1) the effect of sampling data from the AIDA TapeServer data buffers,
2) arithmetic/coding bug in the SyncCheck code
... or ?

I don't recall observing these issues before ...  does that mean we weren't looking? ... or
that there has been some change to hardware operation, software ... ?
 

01:39 : Attachment 26 (R30_70to72) shows a gradual change in the hit pattern for DSSD2 (at the lower left
corner) which may indicate the noise level was increasing.

02.23 BigRIPS data file 1066

03.05 Beam stopped due to problem with LINAC RF.
      Stopped at 1GB through R30_90.
      Bias and leakage currents ok (attachments 1+2). Temps ok (attachment 3).

03.15 R30 stopped.

03.22 BigRIPS data file 1067

03.24 Beam returned and R31 started.

04.25 BigRIPS data file 1068

05.29 BigRIPS data file 1069

06.26 Stop R31 in anticipation of LN2 fill.
      Run stopped at R31_56.

06.31 BigRIPS data file 1070

07.18 R32 started successfully after LN2 fill.

07.24 DAQ crashed. SYNC errors.
      R32 closed.
      Cannot soft reset. Unable to contact nnaida9+19.

07.33 BigRIPS data file 1071
      
07.49 R33 started after FEE power cycle.
      Running quite fast, but seems to be stable. F11 rate still 30cps.

08.26 /home full.
         aidas1> du -sh /home/data/
         811G	/home/data/

         aidas1> du -sh /home/data/*
         3.4M	/home/data/bkg_r97.root
         253G	/home/data/NP1306.rootfiles
         27G	/home/data/NP1512.rootfiles
         190G	/home/data/npg
         311G	/home/data/online
         2.0G	/home/data/R97_0
         2.0G	/home/data/R97_1
         2.0G	/home/data/R97_10
         2.0G	/home/data/R97_11
         1.8G	/home/data/R97_12
         2.0G	/home/data/R97_2
         2.0G	/home/data/R97_3
         2.0G	/home/data/R97_4
         2.0G	/home/data/R97_5
         2.0G	/home/data/R97_6
         2.0G	/home/data/R97_7
         2.0G	/home/data/R97_8
         2.0G	/home/data/R97_9
         7.4G	/home/data/rootFiles
         4.0K	/home/data/rsync.sh
         4.0K	/home/data/rsync.sh~
         4.0K	/home/data/ttt.txt

08.36 BigRIPS data file 1072

09.16 Beam stopped for stripper foil change.
      R33 stopped.
      GK, RG and SN will install repaired clover (G7).

09.28 Beam returned and R34 started.
      BigRIPS data file 1073

10.32 BigRIPS data file 1074

11.00 DSSSD bias & leakage currents OK - see attachments 4 & 5
      FEE64 temperatures OK - see attachment 6
      Merge statistics OK - see attachments 7-12
      System wide checks OK *except* fails for clock status (bit 2 always set) and ADC calibration - see
attachments 13-14

11.20 Visual scaler - see attachment 15

11.25 Analysis of R30_25 - see attachment 16

11.39 BigRIPS data file 1075

13.11 BigRIPS data file 1076

14.10 11.50-14.10 Spectra Rate, HitRate, 1.8.L, 1.8.H, 1.8.W - see attachments 17-24
      1.8.W spectra show some evidence of increased 100kHz noise for nnaida17, 18 & 19
      statistics good events - nnaida17, 18 & 19 > 100k data item/s - see attachment 25

14.16 BigRIPS data file 1077

14.54 BigRIPS data file 1078

15.19 BigRIPS data file 1079

16.14 BigRIPS data file 1080
16.16 BigRIPS data file 1081

17.17 BigRIPS data file 1082

18.18 BigRIPS data file 1083

19.03 BigRIPS data file 1084

18.26 DAQ stopped OK (RIBF03R1/R34_137)

      Clover HPGe LN2 refill

18.30 Beam off - for primary user calibration & stripper foil change

18.45 Ambient temperature +25.5 deg C, d.p. -5.0 deg C, RH 12.%
      DSSSD bias & leakage currents OK - see attachments 27 & 28
      FEE64 temperatures OK - see attachment 29

19.03 BigRIPS data file 1084

19.12 Statistics good events - see attachment 30
      All FEE64s < 100k data items/s, nnaida17, 18 & 19 < 50k data items/s
      Note - nothing has been changed/touched

19.40 Degraders unchanged
      (8mm Al) Fixed + ( 1mm W/1mm Al, 0.3mm W/1mm Al) variable

19.46 DAQ starts (RIBF0R1/R35)

19.50 SyncCheck OK

19.51 BRIKEN data file 155

19.53 Statistics - good events - see attachment 31
      All FEE64s < 100k data items/s, nnaida17, 18 & 19 < 50k data items/s
      Visual scalers - see attachment 32

20.00 BigRIPS data file 1085

20.08 Offline analysis R35_1 - ADc & disc data synchronised - see attachments 33 & 34

20.58 BigRIPS data file 1086

21.15 Rate, HitRate, 1.8.L, 1.8.H, 1.8.W spectra - see attachments 35-42

21.35 Found nnaida17 HEC fast comparator 0x3 *not* 0x2 
      Corrected and saved ASIC settings etc with new DB key 2016Nov29-21.38.02
      Current AIDA data file R35_22











       


      
 

We noticed a peculiar feature in the time-stamp synchronization monitor. The spectra of timestamp difference between pairs of DAQ systems show, for all possible pair combinations, a peak at Delta(ts)= 65535 = 2**15

This corresponds to a difference of 2.6 ms (for 25MHz correlation clock). See the attachments taken ~23:00 of Nov 28th.

We performed the AIDA system-wide checks (no errors) and a timestamp reset, but the second peak at 65K is still there (we also checked that there is no peak at 2*65K, at least in a short run period).

We also observed a double peak for timestam-differences close to zero, which we interpret as good correlations (attachment 2). Note, however, that this double peak became much supprese around midnight (see attachment 6 and 7).

From analysis of ion (BigRIPS) and implant (AIDA) correlations we have some confidence that these two DAQs are synchronized; see entry https://elog.ph.ed.ac.uk/AIDA/492 where we identify an implant for 20% ofions at F11 (and with an implantatin profile that, for example, is consistent with changes to the degrader configuration)

Data for ~3 hrs: Nov 28th, 20:06 to 23:16

Bigrips run 1060 to 1062

AIDA run R30_ 2 to R30_40

Degrader setting: variable= (0.3mmW/1mmAl + 1mmW/1mmAl) + fixed= ( 8 mm Al)

IMPLANT PROFILE: Compare to previous setting (with 3mm Pb as fixed degrader) in elog entry https://elog.ph.ed.ac.uk/AIDA/487

In particular, attachment: https://elog.ph.ed.ac.uk/AIDA/161127_195411/run104x_imp_profile.png

The implantation positin for 40Mg seems to be well optimized (perhaps we can add ~0.5 mm Al to move it further downstream, but not more than that!).

IMPLANT EFFICIENCY: If we compare the number of Al and Mg ions in the ZDS PID for the three runs (~46000, see attachment 5) to the number of ions identified as implants (9389, see attachment 2), we get:

Implant efficiency ~ 20 %   (=9389/46000)

P/S: attachment: hit pattern in BRIKEN with F11 plastic (beam), only for BigRIPS run 40Mg1060

Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 1mm W/1mm Al)

S O R T    C O M P L E T E ..... Mon Nov 28 20:53:02 2016


 *** ENTRY finish

 *** data items:  261088000 ( 120002.96 Hz)
 *** ADC events:   34802098 (  15995.96 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5905997 old count:   5887846 dt:    290.51 s  LEC rate:  20329.92 Hz
 *** DSSSD # 2 count:   5530448 old count:   5513790 dt:    290.51 s  LEC rate:  19037.19 Hz
 *** DSSSD # 3 count:   2899015 old count:   2890171 dt:    290.51 s  LEC rate:   9979.14 Hz
 *** DSSSD # 4 count:   2612137 old count:   2604306 dt:    290.51 s  LEC rate:   8991.63 Hz
 *** DSSSD # 5 count:   1944405 old count:   1938459 dt:    290.51 s  LEC rate:   6693.13 Hz
 *** DSSSD # 6 count:   3424115 old count:   3413635 dt:    290.51 s  LEC rate:  11786.66 Hz
 *** DSSSD # 1 count:        52 old count:        52 dt:    290.51 s  HEC rate:      0.18 Hz
 *** DSSSD # 2 count:        78 old count:        78 dt:    290.51 s  HEC rate:      0.27 Hz
 *** DSSSD # 3 count:       147 old count:       147 dt:    290.51 s  HEC rate:      0.51 Hz
 *** DSSSD # 4 count:       130 old count:       130 dt:    290.51 s  HEC rate:      0.45 Hz
 *** DSSSD # 5 count:        84 old count:        84 dt:    290.51 s  HEC rate:      0.29 Hz
 *** DSSSD # 6 count:        40 old count:        40 dt:    290.51 s  HEC rate:      0.14 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Mon Nov 28 20:54:07 2016

Conditions: One Pb wall with empty windows. 3mm Pb degrader closer to AIDA, on the front of PE wall

Variable degraders: 1.0 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)

 *** data items:  261088000 ( 110875.14 Hz)
 *** ADC events:   39427988 (  16743.72 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5617273 old count:   5603383 dt:    327.21 s  LEC rate:  17167.27 Hz
 *** DSSSD # 2 count:   6007495 old count:   5992656 dt:    327.21 s  LEC rate:  18359.85 Hz
 *** DSSSD # 3 count:   3154280 old count:   3146595 dt:    327.21 s  LEC rate:   9639.98 Hz
 *** DSSSD # 4 count:   2713744 old count:   2706934 dt:    327.21 s  LEC rate:   8293.63 Hz
 *** DSSSD # 5 count:   1977642 old count:   1972985 dt:    327.21 s  LEC rate:   6043.99 Hz
 *** DSSSD # 6 count:   2943065 old count:   2935788 dt:    327.21 s  LEC rate:   8994.47 Hz
 *** DSSSD # 1 count:       128 old count:       128 dt:    327.21 s  HEC rate:      0.39 Hz
 *** DSSSD # 2 count:       174 old count:       174 dt:    327.21 s  HEC rate:      0.53 Hz
 *** DSSSD # 3 count:       236 old count:       236 dt:    327.21 s  HEC rate:      0.72 Hz
 *** DSSSD # 4 count:       158 old count:       158 dt:    327.21 s  HEC rate:      0.48 Hz
 *** DSSSD # 5 count:        80 old count:        80 dt:    327.21 s  HEC rate:      0.24 Hz
 *** DSSSD # 6 count:        29 old count:        29 dt:    327.21 s  HEC rate:      0.09 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Mon Nov 28 15:32:15 2016

See attached histograms

Conditions: Two Pb walls with empty windows. 3mm Pb degrader between MUSIC 1 and MUSIC 2.

Variable degraders: 1.0 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)

 *** DSSSD # 1 count:   5901917 old count:   5892055 dt:    286.62 s  LEC rate:  20591.57 Hz
 *** DSSSD # 2 count:   5564387 old count:   5555277 dt:    286.62 s  LEC rate:  19413.94 Hz
 *** DSSSD # 3 count:   2995556 old count:   2990474 dt:    286.62 s  LEC rate:  10451.38 Hz
 *** DSSSD # 4 count:   2453137 old count:   2448680 dt:    286.62 s  LEC rate:   8558.90 Hz
 *** DSSSD # 5 count:   1926370 old count:   1923142 dt:    286.62 s  LEC rate:   6721.03 Hz
 *** DSSSD # 6 count:   3550119 old count:   3544196 dt:    286.62 s  LEC rate:  12386.23 Hz
 *** DSSSD # 1 count:        76 old count:        76 dt:    286.62 s  HEC rate:      0.27 Hz
 *** DSSSD # 2 count:        94 old count:        94 dt:    286.62 s  HEC rate:      0.33 Hz
 *** DSSSD # 3 count:       118 old count:       118 dt:    286.62 s  HEC rate:      0.41 Hz
 *** DSSSD # 4 count:        74 old count:        74 dt:    286.62 s  HEC rate:      0.26 Hz
 *** DSSSD # 5 count:        48 old count:        48 dt:    286.62 s  HEC rate:      0.17 Hz
 *** DSSSD # 6 count:        17 old count:        17 dt:    286.62 s  HEC rate:      0.06 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Mon Nov 28 14:20:29 2016

See attached histograms

After changing degrader to optimize 40Mg, hit pattern in AIDA is shown in figure below.

The implantation position changed from right side position of  first DSSD to center position of last DSSD.

Analysis of files for two more settings of F11 degrader to optimize implantation of 40Mg.

+ setting 1: from Nov 27th, 22:16
    Fixed degrader: 3 mm Pb + 1 mm Al, Variable degrader: 1.3 mm W + 2 mm Al
    AIDA run: R26_0 to R26_38
    BigRIPS run: 40Mg1037 (partial) to 40Mg1040
    see attachments: run1038_imp*png

+ setting 2: from Nov 28th, 1:38.
    Entered F11 during stripper foil change and removed 1mm Al fixed degrader (same as during Nov 26th - ~ run
40Mg1012).
    Fixed degrader: 3 mm Pb, Variable degrader: 1.3 mm W + 2 mm Al
    AIDA run: R26_39 to ...
    BigRIPS run: from 40Mg1041 to ...
    see attachments: run104x_imp*png (2 hours of data: run 1041 and 1042)

Setting 2 moved implantation depth one or two strips upstream (1.2 according to calculations). 40Mg seems to be
implanted about the third strip; a conclusion with LOW STATISTICS, but consistent with the trend of how the
implantation position depends on neutron number for the higher-count isotopes. 

Setting 2 seems to be our best option (at least without going into F11 and reconfiguring degraders). We will
continue accumulating data with it.

Attachments: the 1D plot shows the ion implant position (DSSD) gated for all ions and for Al and Mg gates in the
PID. The 2D plots show the PID with gates on implants in different DSSDs.

Range calculation for degrader's configuration:
https://docs.google.com/spreadsheets/d/1QJp8t98sT3pExAQb3xtHtAvk4TUDVO6alhbLIaNtx8A/edit?usp=sharing

01.28 Beam stopped temporarily.
      ~750MB into R26_38.
      Bias and leakage currents ok, as are FEE temps (attachments 1-3).
      Removed 1mm fixed Al degrader from in front of PE wall.
         > Now have 3mm PB downstream of 2nd MUSIC + 1.3mm W and 2mm Al.

01.35 Beam returned.
      ~1/2 way through R26_39.

06.27 LN2 fill.
      Run R26 stopped successfully @ R26_97.

07.41 After a couple of failed attempts, R27 successfully started.

07.44 Resync pulse sent from BRIKEN as nothing is seen on sync monitor.

07.58 Bias and leakage currents ok (attachments 4+5).

09.00 Beam stopped for stripper foil change.
      1.4GB into R27_15.
      Will continue with R27.

9.13  Changed degraders and shields in F11
      Pb bricks between MUSIC 1 and MUSIC 2 were not changed, but we confirmed their positions and size of the
window.
         Width of window is 7.5 cm, height of window is larger than the MUSIC windows, depth of Pb to beam is 10 cm
      New Pb bricks placed downstream of the variable degrader
         Width of window is ~12 cm, height of window is larger than the MUSIC windows, depth of Pb to beam is 20 cm
      3 mm Pb degrader was moved from the front of the PE wall to the front of the upstream Pb shield 
         (between MUSIC 1 and 2 as described above)

9.15 BigRIPS run 1049

AIDA runs R27_15 (end portion) and all of _16, and the start of R27_17 include beam-off time.

The start of R27_18 should coincide nearly with beam on.

10.00 System-wide checks OK *except* clock status errors from amongst nnaida5, 7, 8, 15 & 16 - bit 2 always set
      and ADC calibration fail for nnaida13

10.50 BigRIPS run 1050 begins

11.02 We checked the timestamping, and it looks like BRIKEN and AIDA are not synchronized.  So we will restart runs.

11.08 R28_00 at AIDA started

11.12 All syncs look good now.

11.16 BigRIPS data file 1051

12.08 Visual scalers - see attachment 6

12.12 SyncCheck OK - see attachment 7

12.22 BigRIPS data file 1052

14.19 Sync of AIDA shows two peaks with both BRIKEN and BigRIPS, so we stop the run.
      BigRIPS should be starting a new run soon, so we will wait for them to start the new run

14.31 New AIDA run R29_0; started directly after BigRIPS 1054 (14.29 start)

16.00 Offline analysis of R27_1 and R28_14 was done with MIDAS.  See their respective eLog entries
      The main difference between these runs is R27 has the 3 mm Pb closer to AIDA than R28
      The number of implants to AIDA seems about a factor 2 higher with the 3 mm Pb closer to AIDA
      During the next chance to enter F11, we should shift the 3 mm Pb closer to AIDA again, all other things being
equal (BRIKEN impact?!)

18.22 Stop the run (R29_47) in preparation for LN2 fill.

19.30 Ambient temperature +25.7 deg C, dp.p. +0.2 deg C, RH 18.4%
      DSSSD bias & leakage currents OK - see attachments 8 & 9

19.35 Beam is stopped to exchange strippers.  Main exp. team also enters the radiation area for ~20 min
      Remove the 3mm Pb degrader (it was on the upstream side of the Pb shield between MUSIC 1 and MUSIC 2)
      Add 8 mm Al to the front of the PE wall.  This should be an equivalent dE for 40Mg we calculated.

19.59 DAQ starts (RIBF03R1/R30)

20.05 SyncCheck OK

20.06 Beam back (R30_1)
      BigRIPS data file 1060
      Degrader ( 8mm Al ) fixed + ( 0.3mm W/1mm Al + 1.0mm W/1mm Al ) variable
      

S O R T    C O M P L E T E ..... Sun Nov 27 20:32:48 2016


 *** ENTRY finish

 *** data items:  261088000 ( 102453.05 Hz)
 *** ADC events:   37054863 (  14540.63 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5327829 old count:   5309834 dt:    306.37 s  LEC rate:  17389.94 Hz
 *** DSSSD # 2 count:   4754694 old count:   4738448 dt:    306.37 s  LEC rate:  15519.24 Hz
 *** DSSSD # 3 count:   3419847 old count:   3408339 dt:    306.37 s  LEC rate:  11162.32 Hz
 *** DSSSD # 4 count:   3012429 old count:   3002271 dt:    306.37 s  LEC rate:   9832.52 Hz
 *** DSSSD # 5 count:   1976094 old count:   1969554 dt:    306.37 s  LEC rate:   6449.94 Hz
 *** DSSSD # 6 count:   3682932 old count:   3670389 dt:    306.37 s  LEC rate:  12021.03 Hz
 *** DSSSD # 1 count:        37 old count:        37 dt:    306.37 s  HEC rate:      0.12 Hz
 *** DSSSD # 2 count:        49 old count:        48 dt:    306.37 s  HEC rate:      0.16 Hz
 *** DSSSD # 3 count:       174 old count:       172 dt:    306.37 s  HEC rate:      0.57 Hz
 *** DSSSD # 4 count:       228 old count:       226 dt:    306.37 s  HEC rate:      0.74 Hz
 *** DSSSD # 5 count:       210 old count:       209 dt:    306.37 s  HEC rate:      0.69 Hz
 *** DSSSD # 6 count:       125 old count:       125 dt:    306.37 s  HEC rate:      0.41 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Sun Nov 27 20:34:06 2016

Implantation profile in AIDA

    BigRIPS file 1028 (Attachment run1028.png):  Degrader setting: 3 mm Pb(fix) + 0.8 mm W(variable) + 2 mm Al(variable)

    BigRIPS file 1033 (Attachment run1033.png):  Degrader setting: 3 mm Pb(fix) + 0.8 mm W(variable) + 2 mm Al(variable) + 1 mm Al(fix)

    BigRIPS file 1012 is in https://elog.ph.ed.ac.uk/AIDA/478 Degrader setting: 3 mm Pb(fix) + 1.3 mm W(variable) + 2 mm Al(variable)

    Observation: Some Mg isotopes (38, 40) is implanted in last DSSD or out the DSSD stacks. We may need to add more degrader!

Equivalent thickness of W, Pb and Al degraders

   The measured implantation profiles agree with LISE estiamtes for the equivalent change in implantation depth for W, Pb and Al. These were estimated with LISE by comparing change of range in Si for 1mm   degrader of each material (see attachments). Note that W produces a larger change in range than Pb (higher density; according to LISE database).

     1 mm Al: 1.15 mm in Si

     1 mm W: 5.40 mm in Si

     1 mm Pb: 3.05 mm in Si

The current configuration (run Mg401033) gives:

    3 mm Pb + 0.8 mm W + 3 mm Al  = 16.9 mm Si

Probably our best alternative (unless we can go in and rearrange fixed degraders) is:

   3 mm Pb + 1.3 mm W + 3 mm Al = 19.6 mm Si: move implantation depth 2.7 mm upstream

Here is a spreadsheet where you can play with the numbers and create test your own solution to the puzzle: https://docs.google.com/spreadsheets/d/1QJp8t98sT3pExAQb3xtHtAvk4TUDVO6alhbLIaNtx8A/edit?usp=sharing

 !!! We did change degrader for the 3mmPb+1.3mmW+3mmAl setting at 22.16 (from AIDA run 26_0); see elog entry https://elog.ph.ed.ac.uk/AIDA/483

14.15 BigRIPS run number is now 1029

15.22 BigRIPS run number is now 1030

15.36 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      DAQ continues (RIBF03R1/R20)

      Degrader 3mm Pb fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al) variable
      
      ASIC settings 2016Nov17-10.50.10

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      freq 25Hz range
      t_r 50ns, tau_d 50us
      polarity -, int ref, delay MIN, tail pulse

15.43 System-wide checks OK *except* clock status errors from amongst nnaida5, 7, 8, 15 & 16 - bit 2 always set

15.46 Visual scalers - see attachment 4

16.04 Accelerator group wants to change the carbon stripper foil -- beam stop
      Run stop (R20_27 at the end)

16.10 Ambient temperature +25.2 deg C, d.p. +2.6 deg C, RH 23.8%

16.17 BigRIPS run 1031 is junk

16:17 Added 1 mm Al plate to the front of the 3 mm Pb degrader (on the upstream side of PE wall)
      Pb bricks stacked between MUSIC1 and MUSIC2.  
        Not enough time to measure it because of quick foil change
        Basically, about 10 cm thick, and it has a ~7 cm +/- 1 mm window in X, and no cut in Y (it is above and
below MUSIC window)

16:19 Start AIDA run R21.  BRIKEN run started.  BRIKEN Sync issued.

16.22 BigRIPS run 1032

16.26 SyncCheck - see attachment 5

17:01 AIDA merger stopped.  When attempting to stop the Run, the following error is issued:

STATE for nnaida1 returned with an error
error: SOAP http transport timed out after 20000 ms
NONE
error: SOAP http transport timed out after 20000 ms
    while executing
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"


Going through hardware checks, the check sync errors since baseline gets 23/24 failures  (nnaida6 is still my friend)
      Perform TimeStamp RESYNC -> all can pass the check

17:17 AIDA looks happy now.  R22 started.  

18.16 System-wide checks OK *except* clock status errors from amongst nnaida5, 7, 8, 15 & 16 - bit 2 always set
      and ADC calibration fails nnaida13

18.27 DAQ stops OK
      Soft reset following LN2 refill cycle

18.33 BigRIPS 1034

18.56 DAQ starts (RIBF03R1/R23)

      Degrader (3mm Pb + 1mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al) variable
      
      ASIC settings 2016Nov17-10.50.10

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      freq 25Hz range
      t_r 50ns, tau_d 50us

19.02 BRIKEN issue correlation scaler reset request
      SyncCheck OK - see attachment 6

      Visual scaler, 1.8.L & 1.8.W spectra, good events stats - see attachments 7-12

1.8.L pulser peak widths

Peak width =    66.76+/-  0.7221
Peak width =   178.72+/-  2.5140
Peak width =    75.37+/-  0.9037
Peak width =    76.21+/-  0.6630
Peak width =    70.19+/-  0.6772
Peak width =    66.65+/-  0.8516
Peak width =    91.90+/-  0.8132
Peak width =    69.90+/-  1.169
Peak width =    73.73+/-  0.6390
Peak width =    73.01+/-  0.7860
Peak width =    81.35+/-  0.7306
Peak width =    84.03+/-  0.8589

Peak width =    77.27+/-  1.2263
Peak width =    78.92+/-  1.2343
Peak width =    76.99+/-  1.1963
Peak width =    68.85+/-  1.7060
Peak width =    82.37+/-  1.2500
Peak width =    84.83+/-  1.3169
Peak width =    90.84+/-  1.4190
Peak width =    89.81+/-  1.3821
Peak width =   100.33+/-  1.6409
Peak width =    89.42+/-  1.4682
Peak width =    97.52+/-  1.5855
Peak width =    64.02+/-  1.0206

19.19 DAQ stops 
      LN2 refill transient?

19.28 soft reset
      DAQ starts (RIBF03R1/R24)

      Degrader (3mm Pb + 1mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al) variable
      
      ASIC settings 2016Nov17-10.50.10

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      freq 25Hz range
      t_r 50ns, tau_d 50us

19.34 BigRIPS file 1035

19.50 R24_3 AIDA ADC & disc data synchronised - see attachments 13 & 14

21:11 BRIKEN DAQ was not working properly from the last ~half hour (unrelated to AIDA), and had to be restarted and we
also had to send a couple of synchronization pulses.

      R25_0: Started new run once BRIKEN was running and all DAQs synchronized

21.41 BigRIPS file 1037

22.14 Stop DAQ to change degrader

22.16 DAQ starts (RIBF03R1/R26)

      Degrader (3mm Pb + 1mm Al) fixed + (0.3mm W/1mm Al + 1.0mm W/1mm Al) variable
      
      ASIC settings 2016Nov17-10.50.10

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      freq 25Hz range
      t_r 50ns, tau_d 50us

22.36 BRIKEN DAQ restarted
      re-sync issued
      AIDA data file R26_3
      BRIKEN data file 039

22.42 BigRIPS file 1038
      AIDA data file R26_4

Offline analysis of R12 LEC -> MEC setting

S O R T    C O M P L E T E ..... Sun Nov 27 14:37:35 2016


 *** ENTRY finish

 *** data items:   40373208 ( 243177.77 Hz)
 *** ADC events:     443923 (   2673.86 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:      4218 old count:      4215 dt:   2956.04 s  LEC rate:      1.43 Hz
 *** DSSSD # 2 count:      3660 old count:      3657 dt:   2956.04 s  LEC rate:      1.24 Hz
 *** DSSSD # 3 count:      4044 old count:      4041 dt:   2956.04 s  LEC rate:      1.37 Hz
 *** DSSSD # 4 count:      2796 old count:      2792 dt:   2956.04 s  LEC rate:      0.95 Hz
 *** DSSSD # 5 count:      1724 old count:      1722 dt:   2956.04 s  LEC rate:      0.58 Hz
 *** DSSSD # 6 count:       996 old count:       994 dt:   2956.04 s  LEC rate:      0.34 Hz
 *** DSSSD # 1 count:         0 old count:         0 dt:   2956.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:         0 old count:         0 dt:   2956.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:   2956.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:   2956.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:   2956.04 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:         0 old count:         0 dt:   2956.04 s  HEC rate:      0.00 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Sun Nov 27 14:38:07 2016 

Note LEC E_p versus E_n spectra changed from (10keV/channel)

          CALL inc2d( 2020, INT( 0.07 * idata( i ) + 0.5 ),
     +                      INT( 0.07 * idata( j ) + 0.5 ) )

to (3.5MeV/channel)

          CALL inc2d( 2020, INT( 0.01 * idata( i ) + 0.5 ),
     +                      INT( 0.01 * idata( j ) + 0.5 ) )

We conclude that the high energy heavy-ions of interest are largely above the
HEC 200MeV (nominal) threshold.

The function and setting of the AIDA discriminators is as follows:

                  LEC (20MeV FSR)    MEC (1GeV FSR)    HEC (20GeV FSR)    Function

slow comparator   10keV/unit         500keV/unit       n/a                controls LEC/MEC ADC readout

fast comparator   100keV/unit        5MeV/unit         100MeV/unit        controls LEC/MEC disc readout
                                                                          controls HEC ADC readout


For example, a slow comparator setting of 0xa corresponds to a threshold of 100keV (LEC)
or 5MeV (MEC), and the default HEC fast comparator setting of 0x2 corresponds to 200MeV. 

Run R18_2: 3 mm Pb, 0.5 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)

 *** data items:  261088000 ( 105923.42 Hz)
 *** ADC events:   34184359 (  13868.60 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5644505 old count:   5634720 dt:    289.12 s  LEC rate:  19523.08 Hz
 *** DSSSD # 2 count:   5319467 old count:   5310562 dt:    289.12 s  LEC rate:  18398.85 Hz
 *** DSSSD # 3 count:   2800065 old count:   2795460 dt:    289.12 s  LEC rate:   9684.80 Hz
 *** DSSSD # 4 count:   2458077 old count:   2454093 dt:    289.12 s  LEC rate:   8501.94 Hz
 *** DSSSD # 5 count:   1903393 old count:   1900323 dt:    289.12 s  LEC rate:   6583.41 Hz
 *** DSSSD # 6 count:   3534753 old count:   3528835 dt:    289.12 s  LEC rate:  12225.92 Hz
 *** DSSSD # 1 count:        19 old count:        19 dt:    289.12 s  HEC rate:      0.07 Hz
 *** DSSSD # 2 count:        17 old count:        17 dt:    289.12 s  HEC rate:      0.06 Hz
 *** DSSSD # 3 count:        89 old count:        89 dt:    289.12 s  HEC rate:      0.31 Hz
 *** DSSSD # 4 count:       195 old count:       195 dt:    289.12 s  HEC rate:      0.67 Hz
 *** DSSSD # 5 count:       290 old count:       289 dt:    289.12 s  HEC rate:      1.00 Hz
 *** DSSSD # 6 count:       266 old count:       265 dt:    289.12 s  HEC rate:      0.92 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Sun Nov 27 11:42:52 2016
 

Here we show the PID plot and implantation depth in AIDA from BigRIPS file 40Mg1012 (1 hr of data from 20:30 in Nov 26th), merged with AIDA files R10_8 to R10_29

The more neutron-rich isotopes have a shorter range in AIDA, and seem to be implanted towards the first layers of the stack. For 40Mg - most exciting case(?) - there is only one count at DSSD1. But comparing to the position of 38Mg, we could deduce that the implantation depth is already good. need more data analyzed to decide if we need to remove a bit of degrader.

Degrader settings: 3mm Pb (at BRIKEN PE shielding), variable of 1mm W (+1mmAl) + 0.3mmW (+1 mm Al)

Attachment 1: DSSD of detected implant for cuts in the PID.

Attachment 2: PID from F8 to F11.

BigRIPS trees produced with macro at gamma16@a04:exp/users/alfredo/macro/MakePIDTree.C (or MakeAllTree.C, depending on version of merger)

Merging code in: ur16@ribfana03:analysis/users/liujj/BRIKEN_161125Parasitic/
 

Visual scaler inputs

1 F11
2 upstream PL top
3 upstream PL bottom
4 Si top
5 Si bottom
6 AIDA PL
7 F11 x (upstream PL top + upstream PL bottom)
8 F11 x AIDA PL

00.33 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

00.34 DAQ continues (RIBF03R1/R10)

      ASIC settings 2016Nov17-10.50.10
 
      BNC PB-4 pulser
      Amplitude 90,000
      x5 attenuator IN
      frequency 25Hz range
      t_r 50ns, tau_d 50us
      polarity -, tail pulse, delay MIN, INT ref

      good events - see attachment 4
      N.B. 5x FEE64s > 100k data items/s - intrinsic/extrinsic noise has changed cf. 0x FEE64s previously

00.50 SyncCheck - see attachment 5
      Two peaks for RIBF-AIDA, one peak for BRIKEN-AIDA => RIBF issue?

      Merge statistics - see attachments 6-11

00.56 All system-wide checks OK - except clock status - see attachment 12 
      Note - clock status fails show bit 2 set

01.02 Visual scaler - see attachment 13

03.00 Beam stopped temporarily.
      File R10_142 @ ~ 1.5Gb.
      Beam returned ~03.06. Near end of file R10_147.

05.57 Bias and leakage currents ok (attachments 14+15).

06.25 R10 (@R10_211) stopped in anticipation of LN2 fill.

07.11 Successfully restarted DAQ after LN2 fill.
      Started run R11.

07.18 Beam stopped to change stripper foil.
      End of R11_1.
      DAQ also stopped as I typed this.

07.53 Beam returned.
      
08.01 R12 started on 1GeV setting to look at suspicious data in high LEC/low HEC ranges.
      Will run this for ~30mins.      
      (NB: Threshold of 0x20 was not changed so...)

(DK arrives on shift)

08.21 Data size of R12 very small, but maybe to be expected as the low gain usually contains ~10k counts which
      is now suppressed? 
      Offline analysis show no implants, even in the low gain portion.  Strange!
      Redo this test again later today if possible

08.50 Stop R12
      Change the medium energy back to low energy

08.55 Start R13 with low and high energy modes
      The data stops writing to disk for some reason

09.05 Switch the degrader condition: was degraders 2 & 3, now degraders 1 & 2
      Liu and Alfredo had found one 40Mg event (it seems we have about 1 such event per hour)
      However, it was only implanted into DSSD #1, so we want to implant 40Mg deeper (N=1 statistics, woohoo)
      So now, 0.5 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)

09.14 Run takes a moment to begin (data transfer links on FEE 3 and 4 dropped out briefly).  R14 now.

09.39 Data writing stopped. We re-sequence the merger (toggle data transfer on all FEE64s), and start run R15.

09.43 R15 stops writing to disc. All system checks still passed, but not writing.
      Restart merger but lose contact with nnaida14.
09.50 Power cycle FEEs.

10.20 Start run R16 -- garbage
      nnaida13 refuses to calibrate ADCs
      Maybe miscommunication with BRIKEN team?
      When we restart, they need to reload parameters, and then they cannot see our sync (or we are actually not
sending it?)

10.25 Start run R17
      Still the time stamp from AIDA is not visible on the sync check?
      One of the Check ASIC Control tests returned something other than OK
          (sorry, we did not copy it)
          But trying it again (w/o other changes), then it returned the default OK values.
      BRIKEN is not synced with BigRIPS?  They don't know if it gets syncs from AIDA or not
      All AIDA sync checks appear as normal, however

10.36 BRIKEN and AIDA seem to now be synchronized (we did nothing on the AIDA side)
      It is unclear if we are sync'd with BigRIPS.
      Stop this run to get aligned with BRIKEN

10.41 Start R18.  Checks on ASICs and SYNC come back good.
      Degrader settings (not changed): 3 mm Pb,; 0.5 mm W (+1 mm Al); 0.3 mm W (+1 mm Al)
      F11 plastic rate 8 cps
      BigRIPS run 1026; started 10:27

(CG leaves shift)

(TD arrives)

12.28: BigRIPS run number 1028

12.58 Checking the synchronization, and it is not correct.
      R18_28: BRIKEN issues a new synchronization signal

13.25 Merger stops

      Merger error messages for Q 23 (nnaida24) - see attachment 16
      nnaida24 reboots c. 13:31 - see attachment 17

      Request DAQ STOP, restart Merger
      DAQ stops OK
      Request DAQ RESET & SETUP
      R19 started for AIDA, but we never get the full data links (junk)

13.54 nnaida15 did not show data transfer -> merger restarted
      Now R20_0, DAQs look good, BRIKEN issued resync
      BigRIPS run 1028 still

14.00 SyncCheck see attachment 18
      good events statistics - see attachment 19 - rates lower than observed yesterday, not clear why
    




      

R9_24 3mm Pb + 0.3mm W (+1mm Al) + 1.0mm W (+1mm Al)

 *** data items:  261088000 (  99232.91 Hz)
 *** ADC events:   41690396 (  15845.46 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5823816 old count:   5806214 dt:    343.81 s  LEC rate:  16939.06 Hz
 *** DSSSD # 2 count:   5673289 old count:   5657311 dt:    343.81 s  LEC rate:  16501.24 Hz
 *** DSSSD # 3 count:   2708029 old count:   2701714 dt:    343.81 s  LEC rate:   7876.53 Hz
 *** DSSSD # 4 count:   2583742 old count:   2576481 dt:    343.81 s  LEC rate:   7515.03 Hz
 *** DSSSD # 5 count:   1480052 old count:   1475781 dt:    343.81 s  LEC rate:   4304.85 Hz
 *** DSSSD # 6 count:   3956442 old count:   3945032 dt:    343.81 s  LEC rate:  11507.64 Hz
 *** DSSSD # 1 count:       128 old count:       128 dt:    343.81 s  HEC rate:      0.37 Hz
 *** DSSSD # 2 count:       115 old count:       115 dt:    343.81 s  HEC rate:      0.33 Hz
 *** DSSSD # 3 count:        91 old count:        90 dt:    343.81 s  HEC rate:      0.26 Hz
 *** DSSSD # 4 count:        41 old count:        40 dt:    343.81 s  HEC rate:      0.12 Hz
 *** DSSSD # 5 count:        13 old count:        13 dt:    343.81 s  HEC rate:      0.04 Hz
 *** DSSSD # 6 count:        12 old count:        12 dt:    343.81 s  HEC rate:      0.03 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Sat Nov 26 17:34:41 2016
 

R7_45 3mm Pb + 0.5mm W (+1mm Al) only (at start of run) changing to 1.5mm W (+2mm Al)

S O R T    C O M P L E T E ..... Sat Nov 26 16:46:31 2016


 *** ENTRY finish

 *** data items:  261088000 (  98973.71 Hz)
 *** ADC events:   41690396 (  15804.07 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5823816 old count:   5806214 dt:    343.81 s  LEC rate:  16939.06 Hz
 *** DSSSD # 2 count:   5673289 old count:   5657311 dt:    343.81 s  LEC rate:  16501.24 Hz
 *** DSSSD # 3 count:   2708029 old count:   2701714 dt:    343.81 s  LEC rate:   7876.53 Hz
 *** DSSSD # 4 count:   2583742 old count:   2576481 dt:    343.81 s  LEC rate:   7515.03 Hz
 *** DSSSD # 5 count:   1480052 old count:   1475781 dt:    343.81 s  LEC rate:   4304.85 Hz
 *** DSSSD # 6 count:   3956442 old count:   3945032 dt:    343.81 s  LEC rate:  11507.64 Hz
 *** DSSSD # 1 count:       128 old count:       128 dt:    343.81 s  HEC rate:      0.37 Hz
 *** DSSSD # 2 count:       115 old count:       115 dt:    343.81 s  HEC rate:      0.33 Hz
 *** DSSSD # 3 count:        91 old count:        90 dt:    343.81 s  HEC rate:      0.26 Hz
 *** DSSSD # 4 count:        41 old count:        40 dt:    343.81 s  HEC rate:      0.12 Hz
 *** DSSSD # 5 count:        13 old count:        13 dt:    343.81 s  HEC rate:      0.04 Hz
 *** DSSSD # 6 count:        12 old count:        12 dt:    343.81 s  HEC rate:      0.03 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Sat Nov 26 16:47:58 2016

The MIDASsort routine implantdecay.f creates "D spectra of LEC (20MeV FSR) and HEC (20GeV FSR)
E_p versus E_n  events with dispersions of 10keV/channel and 10MeV/channel respectively.   

   Type: Application in Terminal
   Name: Httpd for Data Acquisition
Command: /MIDAS@aidas/TclHttpd/Linux64/TclHttpd-server -port 8015
Comment: TapeServer

   Type: Application in Terminal
   Name: Httpd for Merge/TapeServer
Command: /MIDAS/TclHttpd/Linux64/TclHttpd-server -port 8115
Comment:

   Type: Application in Terminal
   Name: Merger
Command: /MIDAS/Merger/AIDA/Startup
Comment: Merger

   Type: Application in Terminal
   Name: TapeServer
Command: /MIDAS/TapeServer/startup/AidaTapeServer
Comment: TapeServer

aidas1> ls -l /
total 230
dr-xr-xr-x.   2 root root      4096 Nov 23 03:44 bin
dr-xr-xr-x.   5 root root      1024 Feb 17  2015 boot
drwxr-xr-x.  10 root root      4096 Mar 23  2016 cgroup
drwxr-xr-x.  11 root root      4096 Jun 13 17:38 data10
drwxr-xr-x.   2 root root      4096 Apr 28  2015 data20
drwxr-xr-x.   2 root root      4096 Apr 28  2015 data30
drwxr-xr-x.   2 root root      4096 Apr 28  2015 data40
drwxr-xr-x.  21 root root      4560 Nov 26 05:22 dev
drwxr-xr-x. 140 root root     12288 Nov 26 05:25 etc
drwxr-xr-x.   5 root root      4096 Nov  1 17:41 home
drwxr-xr-x.   4 root root      4096 Jan  8  2014 homes
dr-xr-xr-x.  13 root root      4096 Jul 20 03:16 lib
dr-xr-xr-x.  11 root root     12288 Nov 23 03:44 lib64
drwx------.   2 root root     16384 Jan  7  2014 lost+found
drwxr-xr-x.   5 root root      4096 Nov 26 05:22 media
lrwxrwxrwx.   1 root root        12 Apr 22  2014 MIDAS -> /MIDAS@aidas
drwxrwxr-x.  29 npg  npgstaff  4096 Jun  9 11:32 MIDAS@aidas
drwxr-xr-x.  22 root root      4096 Dec 12  2015 MIDAS@aidas.121215
drwxr-xr-x.  29 root root      4096 Jun  8 02:35 MIDAS@aidas.240215
drwxr-xr-x.   2 root root         0 Nov 26 05:22 misc
drwxr-xr-x.   2 root root      4096 Jul 21  2011 mnt
drwxr-xr-x.   2 root root         0 Nov 26 05:22 net
drwxrwxrwx.   1 root root      4096 Nov 12 11:44 ntfs
drwxr-xr-x.   4 root root      4096 Feb 27  2014 opt
dr-xr-xr-x. 501 root root         0 Nov 26 05:20 proc
dr-xr-x---.  29 root root      4096 Nov 26 06:33 root
drwxr-xr-x.   2 root root     12288 Nov 22 03:51 sbin
dr-xr-xr-x.   2 root root      4096 Feb 27  2014 scratch
drwxr-xr-x.   7 root root         0 Nov 26 05:20 selinux
drwxr-xr-x.   2 root root      4096 Jul 21  2011 srv
drwxr-xr-x   13 root root         0 Nov 26 05:20 sys
lrwxrwxrwx.   1 root root        16 May 24  2016 TapeData -> /data10/TapeData
drwxrwxrwt.  80 root root     86016 Nov 26 16:27 tmp
drwxr-xr-x.  13 root root      4096 Jan  7  2014 usr
drwxr-xr-x.  23 root root      4096 Jan  7  2014 var
dr-xr-xr-x.   2 root root      4096 Feb 27  2014 WWW

16.11 The cyclotron and BigRIPS condition are now restored and we have good beam

     Count rate at F11 plastic is ~8 cps

     At F8, they are focued on 41Al (D5 Brho = 7.5235 Tm)

     At F11, they are focused on 40Mg (D8 Brho = 6.3208 Tm)

     Presently around Run R9_19

     3mm Pb is on the exit window of the first MUSIC at F11

     All variable degraders were out (that is not what we intended to have...see next note below)

16.35 The variable degraders were not in the positions we thought.  Now we make it as follows:

     Variable degraders 1.0 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)

     R9_24 just began

18:00 Beam stopped for stripper foil change

          Moved Pb degrader downstream, from window of MUSIC1 detector to hole of polyethylene shield in front of BRIKEN.

18:12 Stopped AIDA DAQ at run R9_43 (Ge filling will start soon)

R7_37 3mm Pb + from 0 to 1.8mm W (+ up to 3mm Al, 1mm per W layer - 0.3mm W, 0.5mm W & 1.0 W))

S O R T    C O M P L E T E ..... Sat Nov 26 15:53:38 2016


 *** ENTRY finish

 *** data items:  261088000 ( 109032.27 Hz)
 *** ADC events:   35610281 (  14871.12 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:   5687384 old count:   5685468 dt:    296.31 s  LEC rate:  19194.17 Hz
 *** DSSSD # 2 count:   5434012 old count:   5432199 dt:    296.31 s  LEC rate:  18339.08 Hz
 *** DSSSD # 3 count:   2817667 old count:   2816768 dt:    296.31 s  LEC rate:   9509.26 Hz
 *** DSSSD # 4 count:   2408578 old count:   2407807 dt:    296.31 s  LEC rate:   8128.63 Hz
 *** DSSSD # 5 count:   1752915 old count:   1752351 dt:    296.31 s  LEC rate:   5915.86 Hz
 *** DSSSD # 6 count:   3659110 old count:   3657789 dt:    296.31 s  LEC rate:  12349.01 Hz
 *** DSSSD # 1 count:        47 old count:        47 dt:    296.31 s  HEC rate:      0.16 Hz
 *** DSSSD # 2 count:        33 old count:        33 dt:    296.31 s  HEC rate:      0.11 Hz
 *** DSSSD # 3 count:        47 old count:        47 dt:    296.31 s  HEC rate:      0.16 Hz
 *** DSSSD # 4 count:        70 old count:        70 dt:    296.31 s  HEC rate:      0.24 Hz
 *** DSSSD # 5 count:        83 old count:        83 dt:    296.31 s  HEC rate:      0.28 Hz
 *** DSSSD # 6 count:        55 old count:        55 dt:    296.31 s  HEC rate:      0.19 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Sat Nov 26 15:

aidas1> setenv MIDASBASE /MIDAS@aidas.240215
aidas1> setenv PATH $MIDASBASE/bin_Linux64:$PATH
aidas1> MIDAS64-session

00.55 Bias and leakage currents ok (attachments 1+2).
      Temps ok (attachment 3).

01.40 DAQ starts (RIBF03R1 - Run R1) 

      Pulser walkthrough

      BNC PB_4 amplituides 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      frequency 250Hz range
      t_r 50ns tau_d 50us
      polarity -, tail pulse, delay MIN

01.55 Ambient temperature +24.8 deg C, d.p. -2.2 deg C, RH 16.6%

02.05 DAQ starts (RIBF03R1 - Run R2)
 
      Pulser walkthrough - same settings as above.

      BNC PB_4 amplitudes 14,000 - 2,000 @ 2,000 step

02.48 Run R3 started.
      Pulser off. Background run.

      15cm Pb wall removed

      6mm Pb degrader installed between MUSIC 1 & 2
      variable degrader 1mm, 0.5mm & 0.3mm W + 1mm Al attached to each W sheet.

04.14 Noticed R3 stopped

05.40 Difficulty starting DAQ
        'want first SYNC' from merger
        lost contact with nnaida19 - restarting merger
        TclHttpd server on nnrpi1 crashed - restarted remotely
        unable to power cycle - need to check fuses when next obtain access
        whilst waiting boot aidas1

        F11 rate c. 450Hz
        AIDA veto plastic c. 3200Hz

07.30 R7 started with beam.

07.38 Beam stopped.
     R7 continues.

08.12 Beam returned to F11.
      File R7_9

08.50 Beam stopped.
      Start of R7_17.
      Using implantdecay.f saw no HEC events in any DSSD. Removed 2mm of Pb degrader.
      We re-insert all the variable Al degraders (for now) for safety.  We can remove them again when the beam
comes back, as necessary.
      Secondary beam current expected to remain at ~50cps.
      Now no beam for ~1hr.

10.15 Beam comes back
      There was a minor delay to get the beam back from some accelerator issue (SRQ issue I am told)
      F11 plastic rate is about 10 cps, still I can see nothing in AIDA low gain
      Main exp. team confirms several 40Mg events within minutes, and makes jokes about old Nature paper with 10 days of
data to do that. 

10.25 Trying to find AIDA's implants, using MIDAS Sort in online mode
      Removed the variable degraders, one-by-one.  Still nothing? (this is now circa file R7_36)
      Is there a possibility that the "low gain" setting of the ASIC is too high energy for something like 40Mg?
      We try to check the implant rate with the AIDA veto plastic
      During this time, we moved degraders in and out, several times, watching the oscilloscope and visual scalers by
video link in F11

10.39  We check some scalers of the dE before AIDA (including F11 x plastic behind AIDA)
      We can see a reasonable effect as expected for these detector count rates
      The count rate never exceeds about 50 to 60 cps at maximum for dE
      I don't trust MIDAS Sort in online mode
          it is known to show factor 10 or less of the real rate, previously)
      Check the data file R7_37 -> may show 1 to 2 Hz
      We should decrease the low gain (heavy ion) threshold or dynamic range for the ASICs?
          But DK is not an expert of that, and doesn't want to cause AIDA to cease functionality...

11.03  Checking runs later than R7_37 (i.e. _38 to _42)
      Never see anything.  R7_37 must have been taken with some amount of degraders in
      We surmise that the ions are mostly punching through AIDA, owing to low Z.
 
11.05  We put in the 0.5 W + 1 mm Al degrader back, to see if we can get back the condition of _37...
      R7_44 after a short delay should have this condition.
      There can be 1 cps or something, though with small statistics it is hard to say...
         It seems to be definitely non-zero though, compared to some runs like _38 to _42

11.10  Add the 1.0 W + 1mm Al (with the 0.5 W and 1 mm Al) degrader
      R7_45 begins ~400 MB before this time.
      We can see some kinds of definite hit events **with low stats** (1 to 2 Hz in several detectors in some data blocks)

It seems to be, if all degraders are out, that the beam punches through AIDA, and dE is below the thresholds
      Of course, the count rate at F11 is only 10 cps, so we cannot conclude much with strong confidence...

11.17 Remove all variable degraders again (near halfway point of R7_46)
      We need a decent LISE++ file to get a clue of where these ions are stopping...!

11.42 Beam is stopped because one of the cyclotron RF systems is down.
      This occurs around the middle of file R7_50

12.40 Still waiting for beam.  I try a more definitive analysis of R7_45

Partial disk analysis of file R7_45:

First part of data look like this:
 *** DSSSD # 1 count:         4 old count:         2 dt:      1.06 s  HEC rate:      1.89 Hz
 *** DSSSD # 2 count:         1 old count:         0 dt:      1.06 s  HEC rate:      0.94 Hz
 *** DSSSD # 3 count:         0 old count:         0 dt:      1.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 4 count:         0 old count:         0 dt:      1.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 5 count:         0 old count:         0 dt:      1.06 s  HEC rate:      0.00 Hz
 *** DSSSD # 6 count:        10 old count:        10 dt:      1.06 s  HEC rate:      0.00 Hz

Notice that we get 10 total counts in DSSD#6, and practically 0 in any other layer (2 in DSSD#1)

Now, as the analysis progresses, we do not increase the counts in DSSD#6, but we start to see events in other layers
 *** DSSSD # 1 count:       128 old count:       128 dt:    343.81 s  HEC rate:      0.37 Hz
 *** DSSSD # 2 count:       115 old count:       115 dt:    343.81 s  HEC rate:      0.33 Hz
 *** DSSSD # 3 count:        91 old count:        90 dt:    343.81 s  HEC rate:      0.26 Hz
 *** DSSSD # 4 count:        41 old count:        40 dt:    343.81 s  HEC rate:      0.12 Hz
 *** DSSSD # 5 count:        13 old count:        13 dt:    343.81 s  HEC rate:      0.04 Hz
 *** DSSSD # 6 count:        12 old count:        12 dt:    343.81 s  HEC rate:      0.03 Hz

 *** ENTRY finish ends


Notice how only 12 counts in DSSD#6 (two new counts) but 128 counts in DSSD#1 (126 new counts).

We can conclude that with 3 mm Pb (fixed), and 0.5 mm W and 1.0 mm Al, some of the beam is stopping in DSSD #6, and mostly
punches through.
Then, when 1.0 mm W and 1.0 mm Al are added, we shift the implantation to the beginning of AIDA (or some in the air
before AIDA).
So, we should try the 1 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al) once the beam returns.

13.34  Stop run 7.  
     Change the medium/low energy selection on ASIC control from 0x0 to 0x1 (from low to medium energy mode)
     (Already, the high energy setting is 0x2 and we cannot decrease it)
     Start run 8.  It looks okay, though of course now data rate becomes much smaller.

13.36 Beam is now on again.  F11 rate has decreased 1 order of magnitude (now it is 0 to 2 Hz)

14.00 As expected, data rate becomes quite low, as the low energy mode has typically many events (10kHz or so)
     But now we don't see anything in the high energy mode as before
     3 mm Pb remains in, and variable degraders are all out (mistake...we meant for some to be in)
     Strange!  But the beam at F11 does not seem to be the same rate as before the cyclotron issues...
     Realized that someone was checking the beam at an earlier focal plane and that F11 has no beam...
     (Post-dated note: forgot to hit "Start ASIC Readout" ---  duh oops.
     RUN 8 IS JUNK, AS NO ASIC READOUT BY USER ERROR (DK)

14.12 Stop run 8.  Change the medium energy mode back to low energy mode of all ASICs.  Restart as run 9.
     But the merger data links don't alternate colors when I reload the merger screen.  Is it bad?
     Data rate is still very low, but that doesn't make much sense.
     Okay, now I start ASIC Readout!  Woohoo!
     But it seems some magnetic dipole of BigRIPS must have an improper setting, explaining the 1 cps rate at F11...

15.33 Bias and leakage currents OK (attachments 9 & 10).
      FEE64 temperatures OK (attachment 11).


15.40 SRIM 2013

      145MeV/u (5800MeV) 40Mg + 3mm Pb 
      sigma 0.55 deg
      ang X (str) 0.90 deg
      assume Pb - DSSSD distance c. 2m => 2000 x tan(0.55 deg) ~ 17mm rms
      consider reducing Pb - DSSSD distance 

16.35 DSSSD bias & leakage currents OK - see attachments 1 & 2
      note - the significant increase observed yesterday appears to be plateau'ing
      FEE64 temperatures OK - see attachment 3

17.10 Rate, HitRate, 1.8.L & 1.8.W spectra - see attachments 4-9

10.05 DSSSD bias & leakage currents OK - see attachments 1 & 2
      note - the significant increase observed yesterday appears to be plateau'ing
      FEE64 temperatures OK - see attachment 3

10.19 System-wide tests - see attachments 4-17
      Clock status fails for varying combinations of nnaida5, 7, 8, 15 & 16
      ADC calibration fails for nnaida23
      All other tests OK

10.27 LOCAL controls for nnaida5, 6, 7, 8, 15 & 16 - see attachments 18-23

10.37 Start DAQ (Nov2016/R1)

      Analysis of R1_0 demonstrates ADC & disc data synchronised - see attachments 24 & 25
      Analysis of R1_0 - see attachment 26
      
20.10 Successfully restarted the DAQ after fill cycle stop.
      Bias and leakage currents ok (attachments 27+28).
      Temps ok (attachment 29).

The System Wide check called "Check Clock Status"  reads the status register from the FEE64 units in the system and compares the value of each bit against a template depending if the FEE64 is Master or not.

The bit fields have the following meaning :-

0. clkd_ld1_pin. This is the "locked" status of the PLL in clock distribution chip LMK03200 #1. The clocks are used for the Waveform ADCs. ADCs 1 to 4 and FPGA Waveform decode logic.
1. clkd_ld2_pin. This is the "locked" status of the PLL in clock distribution chip LMK03200 #2. The clocks are used for the Waveform ADCs. ADCs 5 to 8 and the Master SYNC PLL in the FPGA.
2. aq_clock_locked. This is the "locked" status of the PLL in the FPGA. The clock is used for all data aquisition functions. If this isn't true ('1') then the module is not going to work as part of the system.
3. sync_locked. This is the "locked" status of the PLL in the FPGA which provides a 200MHz clock to the SYNC pulse alignement logic. This is only used in the Master.
4. to 31 read as '0' 

The System Wide Check will only report the state of bits 0 to 2 but by opening the "Local Controls" browser window the status value can be seen ( after a reload ) at offset 1.

10.45 DSSSD bias & leakage currents - see attachments 1 & 2
       note - significant increase in leakage current (~0.8uA) since previous readings
              may be temperature transient or charging effect due to delta electrons due to BigRIPS tuning to F11
              15cm Pb installed upstream of AIDA+BRIKEN some days ago
      FEE64 temperatures OK - see attachment 3

15.35 DSSD bias and leakage currents ok (attachments 4+5).
      Marginal increase over this morning.
      FEE temps ok (attachment 6).
      

Offline analysis of AIDA data files R25_11 to R25_23 using MIDASsort

Note

- no calibration (raw ADC data only)
- no thresholds 
- no clustering
- events delimited by > 2us time difference between successive ADC data words 
  AIDA data files R25_11 to R25_23 inclusive contain 410.3M events
- HEC = high energy channel = 20GeV FSR range for high energy implants
- LEC = low energy channel = 20MeV FSR range for decays (and pulser)
- see attachment 20 *prelimnary* analysis of R25_11 to R25_23 by Tain et al. of 21.11.16


Attachments 1 & 2
-----------------
s1-s24     per FEE64 # ADC data per 20.48us
s101-s124  per FEE64 # disc hits per 20.48us 

Pulser event demonstrates that all FEE64s timestamps are synchronised


Attachments 3 & 4
-----------------
s301-s306  per DSSSD LEC rate (Hz) updated every 1s
s307-3312  per DSSSD HEC rate (Hz) updated every 1s

Demonstrates implant and decay rates were reasonably constant.
Note that there is an integerisation issue in the rate calculation which
means rate is shown as zero periodically.


Attachment 5-8
--------------
s2000-s2005 per DSSSD LEC m_lec_p versus m_lec_n

            following spectra require 0 < m_lec_p < 8 and 0 < m_lec_n < 8
            all combinations of x & y plotted

s2010-s2015 per DSSSD LEC x versus y
s2020-s2025 per DSSSD LEC E_p versus E_n        (10keV/ch nominal)
s2030-s2035 per DSSSD LEC-LEC time              (2.56us/channel)

Demonstrates large LEC multiplicities associated with HEC events but relatively
low multiplicities associated with LEC-only events .

Minimum LEC-LEC time difference c. 1 x 2.56us = 2.56us which suggests events
with low LEC-LEC time difference are non-stochastic and suggests EMI/RFI noise
causing 'multiple' event bursts. This will likely be dominated by channels
0-1 (say) and 60-63 (say) of each FEE64 - disabling these channels may a quick
and dirty way to inspect a subset of data with significantly less EMI/RFI noise

Time difference between successive LEC events

DSSSD centroid =>rate (kHz)
1     21.16    18.5
2     17.45    22.4 
3     40.27     9.70
4     50.86     7.68
5     58.11     6.72
6     29.33    13.3

Which somewhat over-estimates observed rates (see below)

Periodic fine structure observed with period ~4-16 channel (~10-40us)

Attachment 9-13
---------------
s2000-s2005 per DSSSD LEC m_hec_p versus m_hec_n

            following spectra require 0 < m_hec_p < 8 and 0 < m_hec_n < 8
            all combinations of x & y plotted

s2010-s2015 per DSSSD HEC x versus y           (semi-log and linear z normalisation)
s2020-s2025 per DSSSD HEC E_p versus E_n       (10MeV/channel nominal)
s2030-s2035 per DSSSD HEC-HEC time             (2.56us/channel)

Demonstrates relatively low multiplicities associated with HEC events

HEC x versus y spectra are different to those shown by Tain et al. (p.4)
  => BigRIPS PID gate used?
  what is the origin of the fine structure observed by Tain et al. (p.4)?
  
No obvious structure in the time between successive HEC events
    - see also https://elog.ph.ed.ac.uk/AIDA/457
    - minimum time between successive HEC events c. 16 x 2.56us = 41us which is
      consistent with HEC (+LEC) multiplicity per ASIC and ASIC shaping time (8us) 

Note Tain et al. (p.3) plot time between successive events with no restriction on type
(LEC or HEC). The time structure(s) observed may therefore be related to LEC events

Time difference between successive HEC events

DSSSD centroid =>rate (Hz)
1     2566.44    152.0
2     2970.33    131.5 
3     2557.81    152.7
4     2622.38    149.0
5     3656.82    106.8
6     15706.73    24.9

Which somewhat over-estimates observed rates (see below)


Attachment 14-16
----------------
s2200-s2205 per pixel, per DSSSD HEC-LEC time  (2.56us/channel)

Minimum HEC-LEC time difference c. 15 x 2.56us = 38.4us which is consistent
with ASIC shaping and readout times.

In comparison to Tain et al. (p.9) no obvious structures at large 
HEC-LEC time differences. Significant number of excess events observed
at HEC-LEC time differences ~ few hundred us. This is likely due to
the 100kHz EMI/RFI noise observed. 

Attachments 17-19
-----------------

MIDASsort Fortran source, spectrum titles, and namelist I/O variables (in this
case principally FEE64 mapping and default ADC gain/offset values).

S O R T    C O M P L E T E ..... Tue Nov 22 20:20:10 2016


 *** ENTRY finish

 *** data items: -900823296 ( -37356.59 Hz)
 *** ADC events:  410276049 (  17013.89 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:  56031017 old count:  56019099 dt:   3505.73 s  LEC rate:  15982.71 Hz
 *** DSSSD # 2 count:  49362481 old count:  49350664 dt:   3505.73 s  LEC rate:  14080.52 Hz
 *** DSSSD # 3 count:  33599202 old count:  33591614 dt:   3505.73 s  LEC rate:   9584.09 Hz
 *** DSSSD # 4 count:  26666285 old count:  26660843 dt:   3505.73 s  LEC rate:   7606.49 Hz
 *** DSSSD # 5 count:  23365594 old count:  23360881 dt:   3505.73 s  LEC rate:   6664.98 Hz
 *** DSSSD # 6 count:  42705054 old count:  42696091 dt:   3505.73 s  LEC rate:  12181.51 Hz
 *** DSSSD # 1 count:    469505 old count:    469407 dt:   3505.73 s  HEC rate:    133.93 Hz
 *** DSSSD # 2 count:    404352 old count:    404269 dt:   3505.73 s  HEC rate:    115.34 Hz
 *** DSSSD # 3 count:    468569 old count:    468472 dt:   3505.73 s  HEC rate:    133.66 Hz
 *** DSSSD # 4 count:    455030 old count:    454982 dt:   3505.73 s  HEC rate:    129.80 Hz
 *** DSSSD # 5 count:    326872 old count:    326863 dt:   3505.73 s  HEC rate:     93.24 Hz
 *** DSSSD # 6 count:     65691 old count:     65690 dt:   3505.73 s  HEC rate:     18.74 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Tue Nov 22 20:21:09 2016

05.59 M7.3 Fukushima-ken Oki (locally 4) http://www.jma.go.jp/en/quake/20161122060517493-220559.html

06.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

06.28 AIDA to safe mode (FEE64 power OFF, DSSSD bis OFF) until working hours

13.34 Power up FEE64s and bias DSSSDs

      N.B. c. 5 min difference between first and last FEE64 remote filesystem mount

Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.8 (10.1.2.250) from 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.6 (10.1.1.250) from 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.4 (10.1.2.250) from 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.7 (10.1.2.250) from 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.5 (10.1.1.250) from 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.17 (10.1.1.250) from 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.8:757 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida8 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.6:771 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida6 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.4:757 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida4 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.7:882 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida7 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.5:774 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida5 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.17:1005 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida17 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.10 (10.1.1.250) from 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.9 (10.1.1.250) from 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.12 (10.1.2.250) from 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.11 (10.1.2.250) from 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.16 (10.1.2.250) from 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.15 (10.1.2.250) from 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.14 (10.1.1.250) from 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.13 (10.1.1.250) from 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.10:919 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida10 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.9:678 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida9 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.12:913 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida12 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.11:763 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida11 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.16:860 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida16 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.15:965 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.14:931 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida14 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.13:858 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida13 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:24 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPOFFER on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPREQUEST for 10.1.2.19 (10.1.2.250) from 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPACK on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.19:967 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida19 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.1 (10.1.1.250) from 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.20 (10.1.2.250) from 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.22 (10.1.1.250) from 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.23 (10.1.2.250) from 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.24 (10.1.2.250) from 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.21 (10.1.1.250) from 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.1:676 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida1 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.20:890 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.22:725 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida22 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.23:995 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida23 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.24:813 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida24 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.21:932 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida21 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: new high speed USB device number 54 using ehci_hcd
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: New USB device found, idVendor=090c, idProduct=1000
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: Product: Silicon-Power
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: Manufacturer: UFD 2.0
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: SerialNumber: 1500592402400008
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: configuration #1 chosen from 1 choice
Nov 22 13:34:49 aidas1 kernel: scsi12 : SCSI emulation for USB Mass Storage devices
Nov 22 13:34:50 aidas1 kernel: scsi 12:0:0:0: Direct-Access     UFD 2.0  Silicon-Power16G 1100 PQ: 0 ANSI: 0 CCS
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: Attached scsi generic sg8 type 0
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] 31461376 512-byte logical blocks: (16.1 GB/15.0 GiB)
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Write Protect is off
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sdh: sdh1
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Attached SCSI removable disk
Nov 22 13:35:22 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPOFFER on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPREQUEST for 10.1.1.18 (10.1.1.250) from 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPACK on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:23 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.18:1006 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida18 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:35:40 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:52 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:52 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:54 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:54 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:57 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.13:865 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:59 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:59 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:36:49 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:38:00 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPOFFER on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPREQUEST for 10.1.1.2 (10.1.1.250) from 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPACK on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.2:728 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:38:28 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:38:47 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPOFFER on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPREQUEST for 10.1.2.3 (10.1.2.250) from 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPACK on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.3:736 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida3 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:39:14 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)

13.55 DSSSD bias and leakage currents OK - see attachments 4 & 5
      FEE64 temperatures OK - see attachment 6

14.30 Ambient temperature +24.8 deg C, d.p. +8.0 deg C, RH 34.5%

11.10 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      Rate, HitRate, per FEE64 1.8.L and 1.8.W spectra - see attachments 4-9

16.10 DSSD bias and leakage currents ok (attachments 10+11).
      FEE temps ok.

11.20 FEE temps and bias leakages ok (attachments 1-3).
      However, stats screen shows no SYNCs being issued and no "Good Events" (attachment 4).
      Stop and Go had no effect -> SYNCs output but SYNC related system checks failed (attachment 5+6).
      Carried out Reset and Setup and returned to normal operation. 

17.20 FEE temps and bias leakage currents ok (attachments 7+8).
      DAQ still running ok.
      BigRIPS tuning through ZDS for next expt.
      15cm Pb upstream of BRIKEN. 

11.45 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      Updated copy of GoogleDocs leakage current spreadsheet - attachment 4

20:17 DSSD bias and leakage currents ok (attachments 4+5).
      FEE temps ok (attachment 6)

10.15 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachments 3 & 4

Offline analysis of R25_11 to _13 see http://ribf-exp.riken.jp/elog/RIBF123/141

"F5 C target F7 no F11 C 6mm

Date 2016/11/10
Start time: 08:20
DLT File: 161110_0820_767778Ni_035.dlt
RUN: 035
Aida RUN: R25_11

Comment: F11 Degraders taken out after few minutes
Degrader: no

Rates:
F11R:   450 Hz
BRIKEN:  200 Hz

Stop time: 09:18
AIDA run: R25_23
ROOT file: 161110_0918_767778Ni_035.root"

Attachments 1-3 show spectra s2130-s2135 over different ranges

s2130 DSSSD #1 time between successive HEC events (2.56us/channel)
 :
 :
s2135 DSSSD #6 time between successive HEC events (2.56us/channel)

Attachment 4 

s2000-s2005 DSSSD #1-6 LEC m_p versus m_n 

Attachment 5

s2100-s2105 DSSSD #1-6 HEC m_p versus m_n



HEC events for each DSSSD are defined as m_p_hec > 0 and m_n_hec > 0 

Minimum time between HEC events = 16 channels = 40.96us

Centroid channels 0-65525 of spectrum s2130 = ch 2566.44 => 0.00657s -> 152Hz
which agrees well with the typical DSSSD #1 rate for these data files

Is there structure at channel 30 => 76.8us ? More likely it shows variations
in readout time from HEC event to HEC event.

11.30 Leakage currents and FEE temps ok (attachments 1-3)

11.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

11.58 per FEE64 1.8.W spectra - see attachments 4 & 5
    
14.25 Ambient temperature +24.7 deg C, d.p. +9.0 deg C, RH 36.7%
      DSSSD bias & leakage currents OK - see attachments 6 & 7

14.51 DSSSD bias & leakage currents OK - see attachments 1 & 2
      Ambient temperature +24.8 deg C, d.p. +7.2 deg C, RH 32.6%
      FEE64 temperatures OK - see attachment 3
    
      

10.45 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

14.45 DSSSD bias & leakage currents OK - see attachments 4 & 5

15.10 Download .xlsx file of AIDA leakage currents etc from
https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit#gid=1357176413
      - see attachment 6

10.00 DAQ continues (R33) in no storage mode

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System wide checks OK *except* clock status - see attachments 4 & 5
      Merge statistics - see attachments 6-11

10.21 Ambient temperature +24.9 deg C, d.p. +1.4 deg C, RH 21.5% 

      

21.17 DAQ starts (R30)

      Pulser walkthrough
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns tau_d 50us
      polarity -, tail pulse, delay MIN
      frequency 250Hz range

21.30 DAQ stops OK 

21.32 DAQ starts (R31)

      Pulser walkthrough
      Amplitude 10,000 - 2,000 @ 2,000 step

21.40 DAQ stops OK

21.44 DAQ starts (R32)
     
      Background
      BNC PB-4 pulser OFF

21.59 DAQ stops OK

23.45 Started R35 so Jorge can do some tests.
      No storage mode.

00.20 Carried out manual fill on LN2 in advance of beam arriving later (~03.00).
      Took around 20mins.
      Continued writing to R35 after soft reset of DAQ.

Data directory NP1412 renamed as RIBF123R1

... there are several NP1412 'experiments' in the current schedule ... 1412 may be a date

start 18.55 10.11.16
stop 
AIDA filename R26_0
BRIKEN filename 161109_1852_767778Ni_045
BigRIPS filename 443
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents OK attachments 1 and 2 

Degrader all degraders out
F11 rate 430Hz
BigRIPS setting 767778Ni  F5  out, F7 CH2 in, F11 6mm C in

From offline analysis of R26_2

 *** DSSSD # 1 count:       459 old count:       225 dt:      1.02 s  HEC rate:    229.83 Hz
 *** DSSSD # 2 count:       385 old count:       191 dt:      1.02 s  HEC rate:    190.54 Hz
 *** DSSSD # 3 count:       461 old count:       228 dt:      1.02 s  HEC rate:    228.85 Hz
 *** DSSSD # 4 count:       403 old count:       197 dt:      1.02 s  HEC rate:    202.33 Hz
 *** DSSSD # 5 count:       218 old count:       121 dt:      1.02 s  HEC rate:     95.27 Hz
 *** DSSSD # 6 count:        87 old count:        42 dt:      1.02 s  HEC rate:     44.20 Hz

19.02 FEE64 temperature OK - see attachment 3

19.16 BRIKEN DAQ problems following restart - multiple correlation scaler reset requests issued - ignore data
before R26_5
      New BRIKEN data file 161109_1852_767778Ni_046

19.20 AIDA DAQ stalled (presumably *end* of LN2 fill cycle)

      Soft reset OK
      Clock lock state status 0xd - see attachment 6

19.29 Start DAQ (R27) 

19.35 BRIKEN DAQ problems starting SyncCheck program - - multiple correlation scaler reset requests issued -
ignore data before R27_2

19.37 All degraders (5.4mm Al) in for new Takechi et al. setting
      BigRIPS setting 767778Ni  F5 in, F7 out, F11 6mm C in

BRIKEN filename 161109_1852_767778Ni_045
AIDA fileame R27_3
BigRIPS filename 444

19.40 All degraders out

DSSSD bias & leakage currents OK attachments 4 & 5 

From offline analysis of R27_4

 *** DSSSD # 1 count:       281 old count:       247 dt:      2.31 s  HEC rate:    121.43 Hz
 *** DSSSD # 2 count:       247 old count:       219 dt:      2.31 s  HEC rate:    106.74 Hz
 *** DSSSD # 3 count:       286 old count:       252 dt:      2.31 s  HEC rate:    123.59 Hz
 *** DSSSD # 4 count:       287 old count:       253 dt:      2.31 s  HEC rate:    124.02 Hz
 *** DSSSD # 5 count:       201 old count:       178 dt:      2.31 s  HEC rate:     86.86 Hz
 *** DSSSD # 6 count:        33 old count:        29 dt:      2.31 s  HEC rate:     14.26 Hz

20.36 Noted x4 increase in F11 rate to c. 2kHz
      All degraders in (5.4mm Al)

      BRIKEN DAQ shows x4-5 increase for c. 6 minutes
      DSSSD bias & leakage currents OK attachments 7 & 8

07.15 R24 started. BRIKEN run 33.
      76~78Ni beam setting.
      F5 C target out. F7 CH2 in. F11 C out.
      F11 plastic rate ~500cps.
      1mm Al vairable degrader removed after ~3mins. Now have 4.4mm in.
      
07.26 R24 stopped for unknown reason - fill cycle had previously happened, similar scenario to yesterday.
      Soft reset performed successfully.

07.36 R25 started.
      No changes to beam settings above. F11 plastic rate ~500cps.
      Offline implant rates:
      *** DSSSD # 1 count:       894 old count:       682 dt:      1.02 s  HEC rate:    207.66 Hz
      *** DSSSD # 2 count:       781 old count:       590 dt:      1.02 s  HEC rate:    187.09 Hz
      *** DSSSD # 3 count:       900 old count:       682 dt:      1.02 s  HEC rate:    213.54 Hz
      *** DSSSD # 4 count:       790 old count:       594 dt:      1.02 s  HEC rate:    191.99 Hz
      *** DSSSD # 5 count:       421 old count:       317 dt:      1.02 s  HEC rate:    101.87 Hz
      *** DSSSD # 6 count:       162 old count:       128 dt:      1.02 s  HEC rate:     33.30 Hz

08.13 Beam stopped.
      corresponds to file R25_9.

08.15 Leakage currents attachments 1+2.

08.20 Takechi group changing settings: F5 C now in, F7 now empty, F11 C (6mm) now in.
      Beam returned to AIDA.
      Corresponding to 1.0Gb through file R25_10.
      4.4mm of Al variable degrader currently in place. Will gradually remove.

08.23 All variable degrader removed.
      Corresponds to start of file R25_11.
      Rates from offline implant finder:
      *** DSSSD # 1 count:       474 old count:       310 dt:      1.02 s  HEC rate:    160.08 Hz
      *** DSSSD # 2 count:       407 old count:       269 dt:      1.02 s  HEC rate:    134.70 Hz
      *** DSSSD # 3 count:       473 old count:       306 dt:      1.02 s  HEC rate:    163.01 Hz
      *** DSSSD # 4 count:       463 old count:       303 dt:      1.02 s  HEC rate:    156.18 Hz
      *** DSSSD # 5 count:       331 old count:       220 dt:      1.02 s  HEC rate:    108.35 Hz
      *** DSSSD # 6 count:        64 old count:        43 dt:      1.02 s  HEC rate:     20.50 Hz

09.18 Beam stopped 
      Corresponds to file R25_23

09.20 Takechi et al.change settings - F5, F7, F11 out
      Variable degrader 5.4mm Al in
      First AIDA data file R25_24, BRIKEN 161110_0923_767778Ni_036


from file R25_26 (offline):
 *** DSSSD # 1 count:     13306 old count:     13159 dt:      1.01 s  HEC rate:    145.63 Hz
 *** DSSSD # 2 count:      3578 old count:      3536 dt:      1.01 s  HEC rate:     41.61 Hz
 *** DSSSD # 3 count:      7699 old count:      7609 dt:      1.01 s  HEC rate:     89.16 Hz
 *** DSSSD # 4 count:      6191 old count:      6121 dt:      1.01 s  HEC rate:     69.35 Hz
 *** DSSSD # 5 count:      1891 old count:      1872 dt:      1.01 s  HEC rate:     18.82 Hz
 *** DSSSD # 6 count:      1377 old count:      1364 dt:      1.01 s  HEC rate:     12.88 Hz

      
10.08 All system wide checks OK *except* nnaida8 & 16 fail clock status, nnaida23 fails ADC calibration

10.14 Beam stopped 
      Corresponds to file R25_36

10.19 Takechi et al.change settings - F5 in, F7 out, F11 in
      Variable degrader all out
      First AIDA data file R25_37, BRIKEN 161110_1016_767778Ni_37

10.26 Rate, Hitrate, 1.8.L and 1.8.W spectra - see attachments 3-12
      All spectra cleared

10.30 Merge statistics - see attachments 13-17

10.32 Noted that nnaida19 histogram link has dropped - non-critical - continue DAQ

11.09 Change of target upstream: F5 empty, F7 CH2, F11 C 6mm
      Corresponds to AIDA data file R25_48
11:14 Change completed
      Corresponds to AIDA data file R25_49
11:21 All degraders out 
      Corresponds to AIDA data file R25_51

From AIDA R25_55:
 *** DSSSD # 1 count:       241 old count:         0 dt:      1.02 s  HEC rate:    235.75 Hz
 *** DSSSD # 2 count:       210 old count:         0 dt:      1.02 s  HEC rate:    205.42 Hz
 *** DSSSD # 3 count:       242 old count:         0 dt:      1.02 s  HEC rate:    236.72 Hz
 *** DSSSD # 4 count:       209 old count:         0 dt:      1.02 s  HEC rate:    204.44 Hz
 *** DSSSD # 5 count:       118 old count:         0 dt:      1.02 s  HEC rate:    115.43 Hz
 *** DSSSD # 6 count:        46 old count:         0 dt:      1.02 s  HEC rate:     45.00 Hz

11:40 lost beam 
      Current AIDA data R25_56
11:45 beam back
      Current AIDA data R25_57

12.19 Takechi et al. change settings - F5 in, F7 out, F11 C 6mm
      Corresponds to AIDA data file R25_65
      All degraders 5.4mm Al in

12.24 All degraders out 
      Corresponds to AIDA data file R25_67

      From offline analysis of R25_67

 *** DSSSD # 1 count:       584 old count:       472 dt:      3.91 s  HEC rate:    149.31 Hz
 *** DSSSD # 2 count:       516 old count:       410 dt:      3.91 s  HEC rate:    131.92 Hz
 *** DSSSD # 3 count:       607 old count:       488 dt:      3.91 s  HEC rate:    155.19 Hz
 *** DSSSD # 4 count:       595 old count:       475 dt:      3.91 s  HEC rate:    152.12 Hz
 *** DSSSD # 5 count:       439 old count:       355 dt:      3.91 s  HEC rate:    112.24 Hz
 *** DSSSD # 6 count:        87 old count:        69 dt:      3.91 s  HEC rate:     22.24 Hz

      ADC & disc data synchronised - see attachments 17-18

13.38 R25_84 Bias and leakage currents ok - see attachments 19 and 20

13.57 FEE settings checked by saving current settings to file and comparing against the last saved settings. No change was found in the ASIC settings.

14.33 BRIKEN now on run 40 file name 161110_1419. DSSD Rates

 *** DSSSD # 1 count:       138 old count:         0 dt:      1.02 s  HEC rate:    135.54 Hz
 *** DSSSD # 2 count:       119 old count:         0 dt:      1.02 s  HEC rate:    116.88 Hz
 *** DSSSD # 3 count:       139 old count:         0 dt:      1.02 s  HEC rate:    136.52 Hz
 *** DSSSD # 4 count:       134 old count:         0 dt:      1.02 s  HEC rate:    131.61 Hz
 *** DSSSD # 5 count:       101 old count:         0 dt:      1.02 s  HEC rate:     99.20 Hz
 *** DSSSD # 6 count:        20 old count:         0 dt:      1.02 s  HEC rate:     19.64 Hz

15:14 BigRIPS now on Run 439 (CH2 Target in at F7)
      AIDA file R25_104

15.17 BRIKEN now on run 41 file name 161110_1516

 *** DSSSD # 1 count:       380 old count:       169 dt:      1.05 s  HEC rate:    200.67 Hz
 *** DSSSD # 2 count:       326 old count:       144 dt:      1.05 s  HEC rate:    173.09 Hz
 *** DSSSD # 3 count:       381 old count:       172 dt:      1.05 s  HEC rate:    198.77 Hz
 *** DSSSD # 4 count:       336 old count:       150 dt:      1.05 s  HEC rate:    176.90 Hz
 *** DSSSD # 5 count:       191 old count:        86 dt:      1.05 s  HEC rate:     99.86 Hz
 *** DSSSD # 6 count:        73 old count:        35 dt:      1.05 s  HEC rate:     36.14 Hz

15.26 bias and leakage ok see attachment 21 and 22

16.04 BigRIPS Setting change now on 440 F5 In F7 Out F11 In

16.08 BRIKEN Now on run 42 File 161110_1608

16.09 Bias and leakage currents ok attachments 23 and 24

From offline r25_119

 *** DSSSD # 1 count:       255 old count:       117 dt:      1.04 s  HEC rate:    132.79 Hz
 *** DSSSD # 2 count:       234 old count:       111 dt:      1.04 s  HEC rate:    118.35 Hz
 *** DSSSD # 3 count:       259 old count:       120 dt:      1.04 s  HEC rate:    133.75 Hz
 *** DSSSD # 4 count:       250 old count:       115 dt:      1.04 s  HEC rate:    129.90 Hz
 *** DSSSD # 5 count:       181 old count:        84 dt:      1.04 s  HEC rate:     93.34 Hz
 *** DSSSD # 6 count:        33 old count:        18 dt:      1.04 s  HEC rate:     14.43 Hz

16.54 BRIKEN AND BigRIPS change runs. Corresponding to AIDA file R25_129
BigRIPS Now F5 In, F7 Out F11 Out
All variable Al degraders in 5.5mm

16.48 New BRIKEN run
      Run number 043
      File name: 161110_1658_767778Ni

17.02 Bias and leakage currents ok see attachment 25 and 26
      DSSD Rates from offline file R25_131

 *** DSSSD # 1 count:       269 old count:       127 dt:      1.04 s  HEC rate:    136.32 Hz
 *** DSSSD # 2 count:       224 old count:       107 dt:      1.04 s  HEC rate:    112.32 Hz
 *** DSSSD # 3 count:       257 old count:       118 dt:      1.04 s  HEC rate:    133.44 Hz
 *** DSSSD # 4 count:       160 old count:        71 dt:      1.04 s  HEC rate:     85.44 Hz
 *** DSSSD # 5 count:        29 old count:        13 dt:      1.04 s  HEC rate:     15.36 Hz
 *** DSSSD # 6 count:         3 old count:         2 dt:      1.04 s  HEC rate:      0.96 Hz

17.48 BigRIPS change setting putting back the thick Carbon at F11 6mm. Corresponds to AIDA file R25_141
      F5 In, F7 Out, F11 In C 6mm
      All variable Al degraders removed.
      BigRIPS run 442

17.52 BRIKEN starts run 44
      File name 161110_1752767778Ni
      AIDA file R25_142
      bias and leakage currents ok attachments 27 and 28

      DSSD rates offline from R25_142

 *** DSSSD # 1 count:       275 old count:       136 dt:      1.03 s  HEC rate:    134.63 Hz
 *** DSSSD # 2 count:       240 old count:       114 dt:      1.03 s  HEC rate:    122.04 Hz
 *** DSSSD # 3 count:       275 old count:       134 dt:      1.03 s  HEC rate:    136.57 Hz
 *** DSSSD # 4 count:       266 old count:       130 dt:      1.03 s  HEC rate:    131.73 Hz
 *** DSSSD # 5 count:       180 old count:        86 dt:      1.03 s  HEC rate:     91.05 Hz
 *** DSSSD # 6 count:        46 old count:        24 dt:      1.03 s  HEC rate:     21.31 Hz

18.16 System-wide checks OK *except* clock status (some/all of nnaida5,7,8,15&16 - see attachment 29) and ADC calibration (nnaida23) 

18.24 DAQ stops OK
      AIDA data filename R25_149

18.28 System wide checks show SYNC pulse and SYNC errors - see attachments 30-32

18.31 Stop & close merger & TapeServer
      DAQ reset
      DAQ setup - not complete - use Master Timestamp tab to ReSYNC 
      but note unusual(?) ReSYNC LSW value before second ReSYNC attempt- see attachments 33 & 34 before and after ReSYNC 







      



      

DAQ start (R22) failed - merger remained in 'want first sync' state, no output to TapeServer -> soft reset OK

start 20.07
stop
AIDA filename R23
BRIKEN filename 161109_12012_767778Ni_23
BigRIPS filename 
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents OK see attachments 1 & 2
Degrader 5.4mm Al from start of run
F11 rate 450Hz
BigRIPS setting 76-78Ni

N.B. there are a number of correlation resets at the start of R23

Offline analysis of R23_2

 *** DSSSD # 1 count:       297 old count:       146 dt:      1.03 s  HEC rate:    146.07 Hz
 *** DSSSD # 2 count:       259 old count:       126 dt:      1.03 s  HEC rate:    128.66 Hz
 *** DSSSD # 3 count:       281 old count:       141 dt:      1.03 s  HEC rate:    135.43 Hz
 *** DSSSD # 4 count:       178 old count:        86 dt:      1.03 s  HEC rate:     89.00 Hz
 *** DSSSD # 5 count:        30 old count:        13 dt:      1.03 s  HEC rate:     16.45 Hz
 *** DSSSD # 6 count:         3 old count:         2 dt:      1.03 s  HEC rate:      0.97 Hz

00.04 R23 continuing.
      F5 C wedge in. F7 empty. F11 now empty. All variable degraders in place.
      F11 plastic rate ~400-500Hz.
      Change made around start of R23_70.
      Offline implant rates shown below for R23_72:
      *** DSSSD # 1 count:       562 old count:       414 dt:      1.06 s  HEC rate:    139.98 Hz
      *** DSSSD # 2 count:       507 old count:       372 dt:      1.06 s  HEC rate:    127.68 Hz
      *** DSSSD # 3 count:       552 old count:       404 dt:      1.06 s  HEC rate:    139.98 Hz
      *** DSSSD # 4 count:       350 old count:       262 dt:      1.06 s  HEC rate:     83.23 Hz
      *** DSSSD # 5 count:        46 old count:        37 dt:      1.06 s  HEC rate:      8.51 Hz
      *** DSSSD # 6 count:         4 old count:         3 dt:      1.06 s  HEC rate:      0.95 Hz

00:34 (corresponds to the beginning of R23_77) Remove 1 mm of Al variable degrader at F11 (now total Al is
2.2+2.2 = 4.4 mm)
      *** DSSSD # 1 count:       715 old count:       579 dt:      5.00 s  HEC rate:    142.96 Hz
      *** DSSSD # 2 count:       619 old count:       511 dt:      5.00 s  HEC rate:    123.77 Hz
      *** DSSSD # 3 count:       717 old count:       579 dt:      5.00 s  HEC rate:    143.36 Hz
      *** DSSSD # 4 count:       714 old count:       574 dt:      5.00 s  HEC rate:    142.76 Hz
      *** DSSSD # 5 count:       493 old count:       398 dt:      5.00 s  HEC rate:     98.57 Hz
      *** DSSSD # 6 count:        93 old count:        81 dt:      5.00 s  HEC rate:     18.59 Hz

00:43 R23_80 biases are shown as attachments 3 and 4

01.08 F11 C target installed.
      Corresponds to start of R23_90.
01.09 Final 4.4mm of variable Al degrader removed by start of R23_91.
      Implant rates sensible.

02.12 F5 C target removed. F7 CH2 target put in. F11 C target remains in place.
      Rate reduction during R23_115 as beam components changed.     
      implant rate >0 by start of R23_116 and BRIKEN run 30.
      F11 plastic rate ~500Hz.


3:15 Takechi group changes the condition.  This is beginning R23_132 
      F5 carbon, F7 empty.
      F11 pllastic rate is 450 cps
      F11 carbon remains in.

06.20 R23 stopped in anticipation of LN2 fill cycle.
      Takechi group changed setting > F5 C out,  F7 CH2 out, FF C in.
      All variable degraders in.
      
06.30 Leakage currents attachments 5+6.

DAQ start (R20) failed - nnaida5 dropped data transfer #1 link

start 18.51
stop 19.30
AIDA filename R21
BRIKEN filename 161109_1858_767778Ni_21
BigRIPS filename 410
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents OK see attachments 1 & 2
Degrader 1mm Al from start of run
F11 rate 450Hz
BigRIPS setting 76-78Ni

19.35 Offline analysis of R21_12

 *** DSSSD # 1 count:       289 old count:       141 dt:      1.01 s  HEC rate:    146.23 Hz
 *** DSSSD # 2 count:       253 old count:       127 dt:      1.01 s  HEC rate:    124.49 Hz
 *** DSSSD # 3 count:       292 old count:       143 dt:      1.01 s  HEC rate:    147.22 Hz
 *** DSSSD # 4 count:       284 old count:       138 dt:      1.01 s  HEC rate:    144.25 Hz
 *** DSSSD # 5 count:       210 old count:        98 dt:      1.01 s  HEC rate:    110.66 Hz
 *** DSSSD # 6 count:        46 old count:        25 dt:      1.01 s  HEC rate:     20.75 Hz

Scalers - see attachment 4

1 F11
2 Upstream plastic top
3 Upstream plastic bottom
4 Si top
5 Si bottom
6 AIDA plastic veto
7 F11 and (upstream plastic top or upstream plastic bottom)
8 F11 and AIDA plastic veto 

19.42 Online analysis confirms ADC data synchronised

start 17:44
stop 17:49
AIDA filename R16
BRIKEN filename 161105_1507
BigRIPS filename run405
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents ok attachments 1 and 2
Degrader All variable in at start (5.5mm Al)
F11 rate 430Hz
BigRIPS setting 76-78Ni

start 17:52
stop 17.55
AIDA filename R17
BRIKEN filename 
BigRIPS filename 
ASIC settings 2016Nov07_23.03.06
Degrader All variable in at start (5.5mm Al)
F11 rate 430Hz
BigRIPS setting 76-78Ni

start 17:56
stop 18:02
AIDA filename R18
BRIKEN filename 161105_1507
BigRIPS filename run405
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents ok
Degrader All variable in at start (5.5mm Al)
F11 rate 430Hz
BigRIPS setting 76-78Ni

start 18:04
stop 18.28
AIDA filename R19
BRIKEN filename 
BigRIPS filename 
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents ok
Degrader All variable in at start (5.5mm Al)
18.07 2x2.2mmAl degrader removed now running with 1.1mm.
F11 rate 430Hz
BigRIPS setting 76-78Ni

 *** DSSSD # 1 count:       474 old count:       224 dt:      1.03 s  HEC rate:    242.26 Hz
 *** DSSSD # 2 count:       414 old count:       194 dt:      1.03 s  HEC rate:    213.18 Hz
 *** DSSSD # 3 count:       480 old count:       225 dt:      1.03 s  HEC rate:    247.10 Hz
 *** DSSSD # 4 count:       414 old count:       196 dt:      1.03 s  HEC rate:    211.25 Hz
 *** DSSSD # 5 count:       232 old count:       111 dt:      1.03 s  HEC rate:    117.25 Hz
 *** DSSSD # 6 count:        95 old count:        42 dt:      1.03 s  HEC rate:     51.36 Hz

18.28 DAQ stopped - presumably ORNL HPGe clover LN2 refill cycle commences

Run 15

start 16:14
stop 
AIDA filename 
BRIKEN filename 161109_1614
BigRIPS filename run406
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents ok attachments 1 and 2 
Degrader All variable in at start (5.5mm Al) at 
F11 rate 430Hz
BigRIPS setting 76-78Ni

16:16 removed all variable degrader

      Attachments 3, 4, 5 and 6 are plots for FEE 24 ASICs 1, 2, 3, 4

17.08 BRIKEN issues correlation scaler reset

17.32 Run stop

11.13 Still waiting to get beam back got access so took temp measurement.
      T=25.6 DP=0.0 H=18.1
      Biases and leakages good. Attachments 1 and 2

11.58 *All* system wide checks OK

14.29 *All* system wide checks OK



start 15:09
stop 16.04
AIDA filename R14
BRIKEN filename 161105_1507
BigRIPS filename run405
ASIC settings 2016Nov07_23.03.06
DSSSD bias & leakage currents ok attachments 3 and 4
Degrader All variable in at start (5.5mm Al)
F11 rate 430Hz
BigRIPS setting 76-78Ni

 *** DSSSD # 1 count:       316 old count:       146 dt:      1.02 s  HEC rate:    166.21 Hz
 *** DSSSD # 2 count:       294 old count:       143 dt:      1.02 s  HEC rate:    147.64 Hz
 *** DSSSD # 3 count:       396 old count:       233 dt:      1.02 s  HEC rate:    159.37 Hz
 *** DSSSD # 4 count:       257 old count:       147 dt:      1.02 s  HEC rate:    107.55 Hz
 *** DSSSD # 5 count:        43 old count:        28 dt:      1.02 s  HEC rate:     14.67 Hz
 *** DSSSD # 6 count:         3 old count:         1 dt:      1.02 s  HEC rate:      1.96 Hz

15.24 Briefly reduce Al degrader from 5.4mm Al to 3.2mm Al
      Observe increased rate in DSSSDD #6, similar rates in  DSSSD #1 and increased
      rates in AIDA plastic veto 
15.26 Return to 5.4mm Al degrader

16.06 *All* system wide checks OK

09.50 Run 13 Start
      Thick C target (6mm) removed from F11. All variable Al degraders put in place
      AIDA settings file: 2016Nov07-23.03.06
      Keep alive script updated to current directory.

      Output from Tom's Implants.f script
 *** DSSSD # 1 count:      6316 old count:      6290 dt:      1.19 s  HEC rate:     21.89 Hz
 *** DSSSD # 2 count:      5435 old count:      5410 dt:      1.19 s  HEC rate:     21.05 Hz
 *** DSSSD # 3 count:      6314 old count:      6286 dt:      1.19 s  HEC rate:     23.57 Hz
 *** DSSSD # 4 count:      5211 old count:      5186 dt:      1.19 s  HEC rate:     21.05 Hz
 *** DSSSD # 5 count:      1383 old count:      1375 dt:      1.19 s  HEC rate:      6.73 Hz
 *** DSSSD # 6 count:        67 old count:        66 dt:      1.19 s  HEC rate:      0.84 Hz

Measured rates from file:

DSSD1:  309
DSSD2:  270
DSSD3:  308
DSSD4:  249
DSSD5:  67
DSSD6:  3.3

10.03 biases and leakage currents attachments 1 and 2

10.26 Run stopped as Takechi group optimise upstream lowering our rate.

Takechi team changes the condition: F5 carbon; F7 empty; F11 carbon

  F11 Plastic is 1.1kHz

BRIKEN: 161109_0828_747576Ni_013.dlt

AIDA settings file: 2016Nov07-23.03.06

Initially we have all the Al variable degraders in, but then after the run began and we saw nothing, we reduce it to 1 mm of Aluminium.

Biases shown as attachments 1 and 2

Offline data rates (from R12_2)

 *** DSSSD # 1 count:      1022 old count:       709 dt:      2.91 s  HEC rate:    351.69 Hz
 *** DSSSD # 2 count:       863 old count:       597 dt:      2.91 s  HEC rate:    296.98 Hz
 *** DSSSD # 3 count:       995 old count:       693 dt:      2.91 s  HEC rate:    342.40 Hz
 *** DSSSD # 4 count:       827 old count:       575 dt:      2.91 s  HEC rate:    284.59 Hz
 *** DSSSD # 5 count:       246 old count:       164 dt:      2.91 s  HEC rate:     84.65 Hz
 *** DSSSD # 6 count:        11 old count:        10 dt:      2.91 s  HEC rate:      3.79 Hz
FEE64 temperatures OK - see attachment 3

08.55 Online analysis shows ADC data synchronised - see attachment 4

09.05 Rate, HitRate, 1.8.L and 1.8.H energy spectra - see attachmemnts 5-10

Run stop 9:46

Recovered AIDA after power cycle (unknown cause of crash from the end of R10)

Corresponding run in BRIKEN: 161109_0814_747576Ni_012

Run condition for Takechi has changed since our crash

F5 empty; F7 CH2; F11 carbon

At the beginning of our run, we had all Aluminium degraders in (1 mm was added back after our crash for safety)

We finally removed all but 1 mm Al on the variable degrader

SSD biases shown as attachments 1 and 2

8:20 They inform us that they want to take the F11 carbon out (in the middle of elog entry)

Put the variable Al degraders all back in for safety (was 4.4 mm, now 5.4 mm)

Takechi team switches the condition: F5 empty; F7 CH2; F11 empty

7:00  Reset Run Control, run Setup, everything looks good.  Start the run

          Data rate around 10 MB/s

7:04  Checking the online data rate with MIDAS, the event rate is nearly zero...but it comes back (presume Takechi team was playing with the beam condition)

Events come back...

F11 Plastic rate is 1.2kHz

Here is a sample of the offline analysis of event rates with all Al degraders in:

 *** DSSSD # 1 count:       640 old count:       321 dt:      1.03 s  HEC rate:    309.51 Hz
 *** DSSSD # 2 count:       551 old count:       277 dt:      1.03 s  HEC rate:    265.85 Hz
 *** DSSSD # 3 count:       773 old count:       452 dt:      1.03 s  HEC rate:    311.45 Hz
 *** DSSSD # 4 count:       633 old count:       371 dt:      1.03 s  HEC rate:    254.20 Hz
 *** DSSSD # 5 count:       211 old count:       140 dt:      1.03 s  HEC rate:     68.89 Hz
 *** DSSSD # 6 count:         6 old count:         4 dt:      1.03 s  HEC rate:      1.94 Hz

7:11 Remove 1 mm of Al variable degrader (back to 4.4 mm total before AIDA)

Offline rates from R10_3:

 *** DSSSD # 1 count:      2596 old count:      2447 dt:      6.52 s  HEC rate:    398.43 Hz
 *** DSSSD # 2 count:      2193 old count:      2067 dt:      6.52 s  HEC rate:    336.58 Hz
 *** DSSSD # 3 count:      2641 old count:      2485 dt:      6.52 s  HEC rate:    405.34 Hz
 *** DSSSD # 4 count:      2626 old count:      2470 dt:      6.52 s  HEC rate:    403.04 Hz
 *** DSSSD # 5 count:      1940 old count:      1825 dt:      6.52 s  HEC rate:    297.75 Hz
 *** DSSSD # 6 count:       852 old count:       801 dt:      6.52 s  HEC rate:    130.76 Hz

7:18 Leak currents shown as attachments 1 and 2

7:20 Notice that the data rate has gone to zero...

Follow along with https://elog.ph.ed.ac.uk/AIDA/303 to fix it.  This looks good and the merger seems to come back successfully.

Trying to STOP on Run Control gave:

STATE for nnaida16 returned with an error
error: SOAP http transport timed out after 20000 ms
NONE
error: SOAP http transport timed out after 20000 ms
    while executing
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"

Try a Reset on Run Control (this is the only option at present)

  nnaida16 showed "going" but after Reset shows "reset" like all the rest.

Now we get another error

JavaScript error occurred! 

Error description:     SyntaxError: missing ) after argument list
Page address:          http://localhost:8015/DataAcquisitionControl/DataAcquisitionControl.tml
Line number:           203

nnaida16 shows error

STATE for nnaida16 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida16:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000 -query {<?xml version="1.0" encoding="UTF-8..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida16:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000 -query {<?xml version="1.0"..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout $timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
    (procedure "DataAcquisitionControlClient__GetState" line 1)
    invoked from within
"DataAcquisitionControlClient__GetState"
GET OPTION for nnaida16 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida16:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 60000 -query {<?xml version="1.0" encoding="UTF-8..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida16:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 60000 -query {<?xml version="1.0"..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout $timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetOption HistEnable"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetOption $args"
    (procedure "DataAcquisitionControlClient__GetOption" line 1)
    invoked from within
"DataAcquisitionControlClient__GetOption "$AcqGetOption""
GET OPTION for nnaida16 returned with an error
connect failed 
NONE
connect failed 
    while executing
"::http::geturl http://nnaida16:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 60000 -query {<?xml version="1.0" encoding="UTF-8..."
    ("eval" body line 1)
    invoked from within
"eval [list ::http::geturl $url] $args"
    (procedure "::http::geturl_followRedirects" line 4)
    invoked from within
"::http::geturl_followRedirects http://nnaida16:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 60000 -query {<?xml version="1.0"..."
    ("eval" body line 1)
    invoked from within
"eval ::http::geturl_followRedirects [list $url]  -headers [list $local_headers]  -type text/xml  -timeout $timeout  -query [list $request]  $local_pro..."
    (procedure "::SOAP::Transport::http::xfer" line 61)
    invoked from within
"$transport $procVarName $url $req"
    (procedure "::SOAP::invoke" line 18)
    invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetOption Xfer2Enable"
    ("eval" body line 1)
    invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetOption $args"
    (procedure "DataAcquisitionControlClient__GetOption" line 1)
    invoked from within
"DataAcquisitionControlClient__GetOption "$AcqGetOption""
 

TapeServer was still running, so maybe that was a mistake...?

Power cycle...

06.02 R9 started with Takechi group C target out and all variable degraders in.
      F5 C in. F7 empty. F11 empty.
      F11 plastic rate 1.1kHz.
      Offline sort rates below:
      *** DSSSD # 1 count:       636 old count:       317 dt:      1.01 s  HEC rate:    314.93 Hz
      *** DSSSD # 2 count:       544 old count:       267 dt:      1.01 s  HEC rate:    273.47 Hz
      *** DSSSD # 3 count:       628 old count:       308 dt:      1.01 s  HEC rate:    315.92 Hz
      *** DSSSD # 4 count:       532 old count:       267 dt:      1.01 s  HEC rate:    261.62 Hz
      *** DSSSD # 5 count:       146 old count:        76 dt:      1.01 s  HEC rate:     69.11 Hz
      *** DSSSD # 6 count:         6 old count:         3 dt:      1.01 s  HEC rate:      2.96 Hz

06.09 Removed 1mm of variable degrader.
      Offline sort rates/below:
      *** DSSSD # 1 count:      1501 old count:      1316 dt:      4.61 s  HEC rate:    325.34 Hz
      *** DSSSD # 2 count:      1231 old count:      1079 dt:      4.61 s  HEC rate:    266.82 Hz
      *** DSSSD # 3 count:      1498 old count:      1314 dt:      4.61 s  HEC rate:    324.69 Hz
      *** DSSSD # 4 count:      1502 old count:      1323 dt:      4.61 s  HEC rate:    325.55 Hz
      *** DSSSD # 5 count:      1346 old count:      1182 dt:      4.61 s  HEC rate:    291.74 Hz
      *** DSSSD # 6 count:       487 old count:       430 dt:      4.61 s  HEC rate:    105.56 Hz

06.20 Stopped the run preemptively to Ge LN2 autofill which is known to crash the DAQ

03.50 74-76Ni beam delivered to F11.
      F11 plastic rate ~1kHz.
      F5 C target in. F7 empty. F11 C target in.
      R7 started 03.51.
      Initial rate 0Hz in all DSSD.
      Removed all variable degraders and implant rate only up to ~1Hz in DSSD1.
      Will replace all variable degraders, enter B2F and remove fixed 5mm plate and work back from there.
      R7 stopped 04.00.

04.07 Beam returned to F11.
      F11 plastic rate 1.1kHz.
      R8 started normally.
      Will now gradually remove variable degraders.

04.18 Now removed all variable degraders.
      Implant rates from offline/full analysis below:
      *** DSSSD # 1 count:       697 old count:       354 dt:      1.03 s  HEC rate:    333.95 Hz
      *** DSSSD # 2 count:       592 old count:       308 dt:      1.03 s  HEC rate:    276.51 Hz
      *** DSSSD # 3 count:       696 old count:       349 dt:      1.03 s  HEC rate:    337.85 Hz
      *** DSSSD # 4 count:       688 old count:       348 dt:      1.03 s  HEC rate:    331.03 Hz
      *** DSSSD # 5 count:       609 old count:       312 dt:      1.03 s  HEC rate:    289.16 Hz
      *** DSSSD # 6 count:       229 old count:       116 dt:      1.03 s  HEC rate:    110.02 Hz

      Leakage currents @ 04.21 attachments 1+2.

05.55 Takechi group want to remove C target.
      Moving variable degraders back into place.
      R8 stopped 05.59.
      Leakage currents @ 05.55 attachments 3+4.

00.15 Setting changed to 71,72,73Ni. All variable degraders in.
      Will remove while watching rates to settle on degrader setting.
      F5 CH2 in. F7 CH2 out. F11 C target in.
      F11 plastic rate 1.2kHz.
      R5 started.
      
00.30 Cut F2 momentum slit. F11 plastic rate down to ~400cps.

00.34 Increased primary beam intensity by x2.
      F11 plastic rate increased to ~800cps.
      This setting should run until the beam change ~03.00.
      
00.47 R6 started.
      All degraders gradually removed but implant rate in DSSD1 only ~10s Hz.

01.03 71,72,73Ni beam stopped for tuning to next setting.
      R6 stopped.
      Leakage currents attachments 1+2

23:28 Run 4 Start
      Thick 6mm C target in beam
      
      Running with 3.2mm (variable) + 8mm (fixed) of Al degrader. Fixed degrader in same position as R3.
      Variable degrader reduced to 1mm of Al.

11:21 Run 3 Started
      Degrader moved upstream. AIDA moved to centre of BRIKEN. Fixed degrader moved upstream from centre of BRIKEN.
11:25 Run 3 Stopped

10:36 Run 2 Start
      Degraders (5.4mm Al) in at start and all removed once started.
      Other settings same as R1.

22.45 DAQ stop OK 

      All variable degraders (5.4mm Al) in

From analysis of R2_3

S O R T    C O M P L E T E ..... Tue Nov  8 22:59:02 2016


 *** ENTRY finish

 *** data items:  146156010 ( 541115.06 Hz)
 *** ADC events:    7815683 (  28936.09 Hz)
 *** time warps:          0 (      0.00 Hz)
 *** DSSSD # 1 count:     51901 old count:     51732 dt:     84.55 s  HEC rate:    613.87 Hz
 *** DSSSD # 2 count:     42966 old count:     42831 dt:     84.55 s  HEC rate:    508.19 Hz
 *** DSSSD # 3 count:     37092 old count:     36983 dt:     84.55 s  HEC rate:    438.71 Hz
 *** DSSSD # 4 count:     12570 old count:     12532 dt:     84.55 s  HEC rate:    148.67 Hz
 *** DSSSD # 5 count:      1927 old count:      1921 dt:     84.55 s  HEC rate:     22.79 Hz
 *** DSSSD # 6 count:       659 old count:       658 dt:     84.55 s  HEC rate:      7.79 Hz

 *** ENTRY finish ends

S O R T    S T O P P E D ..... Tue Nov  8 22:59:16 2016

s2000-s2005 m_p versus m_n DSSSD #1-6
s2010-s2015 x versus y DSSSD #1-6
s2020-s2025 E_p versus E_n DSSSD #1-6

23.05 DSSSD bias & leakage currents - see attachments 5 & 6
      FEE64 temperatures - see attachment 7

AIDA run with Takechi experiment. 71~73 Ni beam setting

F5 carbon target is:    IN

F7 CH2 target is:        OUT

F11 carbon target is:  OUT

All variable Al degraders at F11 are OUT

     When the run started, we had 1mm Al degrader in (count rate of AIDA was near the background rate)

     Then we took out the final 1mm Al degrader, and we started to get counts on AIDA (600 Hz on detectors 1, 2, 3, very little on 4, 5, 6)

Run file: NP1412/R1

ASIC parameter file: 2016Nov07-23.03.06

5 mm thick Al stopper is at the center of BRIKEN, with AIDA slightly behind it

Run start: 8/11/2016 22:00

Leak currents (4 to 5 uA each) shown as Attachment #1

22:30 All degraders removed at end of run Run Stop time 22:30

Used a program to sort through the settings files located in /MIDAS/DB/EXPERIMENTS/AIDA/Settings_FIle_Name/nnaider1,2,3... and /MIDAS/DB/EXPERIMENTS/AIDA/Options.
By comparing the parameter values we got from this to the value we know they should be set to we found some discrepancies in FEEs 1 and 3-8 with values being set
to 0xd rather than the value to which they should have been saved to. This was corrected and new settings and options files were created. Last night we saw that 
the DAQ is able to load these files correctly and that the values remain as they should be.

An excel sheet is attached which makes it easy to compare the values parsed by the code to the default values. To do this it is best to sort the data by FEE, then
type, then type number then parameter value number using the sort function on the data tab. After copying this data into the new settings sheet it will flag any 
values that do not match the default values in red.

When you request a filename that already exists and select OK to the prompt
suggesting a new filename, TapeServer adds an additional character to the 
volume name - see attachment 1

08.15 DAQ found stalled

      Soft reset OK

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      Ambient temperature +25.0 deg C, d.p. -0.2 deg C, RH 19.2%

      System-wide checks OK *except* clock status errors for naida5, 7, 8, 15, 16

      ASIC settings 2016Nov07-23.03.06

      BNC PB-4 
      amplitude 90,000
      frequency 25Hz range

08.30 AIDA moved into (CH2)n moderator

08.46 Start DAQ (R141)
      BNC PB_4 pulser OFF
      Background run with AIDA inside (CH2)n moderator

      Statistics - good events - attachment 4

      per FEE64 1.8.W spectra - see attachments 5-8

09.00 DAQ stops OK
      System wide checks OK

      BNC PB-4 pulser ON
      amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us
      polarity -, delay MIN, tail pulse
      frequency 25Hz range

14.51 Bias and leakage voltages good (Attachments 9 and 10)

16.30 Ca beam delivered to F11 around 16:30.
      PB shield still in place up stream of AIDA.
      DAQ running in no storage mode. Leakage currents @ 16:40 in attachments 11+12.

18.28 DAQ stopped during LN2 fill cycle. Soft reset completed. 
      Will wait 15mins for cycle to complete and the start new run.

18.34 Ca beam stopped.

19.07 Run R146 started on no storage mode.

20.11 DAQ found stopped.
      Unable to perform soft reset. Power cycling FEEs.

11.10 DAQ found stopped. No storage mode so can't tell when, but presumably at 06.30 during LN2 fill cycle.
      Unable to regain control of (see errors after merger restart in attachment 1) system so power cycling FEEs.

11.15 Bias voltages @ ambient temp 25.5oC before DSSD noise investigation (attachment 2+3).

11.40 NB+DK attempting shielding of LN2 solenoid.
      Manual fill initiated. DAQ still stopped at 11.41.
      Unable to regain control of system. Power cycle FEEs while DK+NB install more shielding.

2:55 Made attempts to solve the noise issue that was plaguing DSSD1.
     Attempts at checking the cabling, making sure the detectors were light sealed and switching the bias cables
         around were unsuccessful.
     A blue cable was found to be laying across the snout of AIDA that runs as a temperature probe for one of the
         clover detectors.
     Moving this cable appears to have solved this issue (Has been locked in position). See pulser spectrum in
         attachments 4 and 5

23.15 DSSSD bias & leakage current Ok - see attachments 6-7
      FEE64 temperatures OK - see attachment 8

00.05 DAQ start (R137)
      Pulser Walkthrough
      BNC PB_4 amplitudes 90,000-10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns tau 50us
      Frequency 250Hz range
      Polarity -, tail pulse, delay MIN

      ASIC settings 2016Nov07-23.03.06

00.21 DAQ start (R138)
      Amplitude 14,000-2,000 @ 2,000 step

00.42 Background run R139 started. Pulser set to external trigger.

01.01 Run R139 closed successfully.
      
01.04 Started R140 on no storage mode to run overnight.
      Leakage currents @ 01.06 shown in 9+10.
      R140 still running ok @ 01.40.

Leakage current spreadsheet has now been uploaded to google docs for ease of access.

It can be accessed and edited from the following link: https://docs.google.com/spreadsheets/d/12hgbrywB10hGsKt5uc2HnLfZymh8_uvM6cEASbbqnBE/edit?usp=sharing

10:34 Detector Bias a leakage currents all ok. (Attachments 1 and 2)
      Temperatures all ok (Attachment 3)
      All system wide checks ok other than clock status see attachment 4
      DAQ continues to run ok (R124) (No stop at 6:30am)
      DAQ running at about 14MB/s to disc which is faster than before.
      Most likely due to the increased rate in detector 1 which is represented at FEEs 17, 20, 22 and 23 in
      attachment 5.

      Also attached are the spectra for layouts 1-4 & 7-8 as attachments 6-11
      When looking at the pulser spectrum in layouts 3 and 4 (attachments 9 and 10) we see that the pulser peaks
relating to this detector is broader shown by
      the decreased peak height.

      Comparing the waveforms in attachments 11 and 12 to those taken on Monday 31st Oct we see that the noise
in nnaida 5 and 6 has been greatly reduced.
      On the others however there appears to be an increase in the amplitude of the noise.

      11:25 The second putty window for leakage currents was found to have been frozen for the past 24 hours.
Was reloaded and updated leakage currents are in attachment 13 and 14

12.15 Analysis of R124_291 shows ADC & disc data synchronised - see attachment 15
      Analysis of data file - see attachment 16

18:26 DAQ stopped, presumably during LN2 fill cycle.
      Restarted the merger and tried "Stop" on the DAQ control page. ~50% of nnaida now show "error."
      R124 closed 18.29
      Could not regain control of the system. Jorge switched BRIKEN to its internal clock and FEEs power cycled @
19.20.

23.35 DAQ started (R126 - no storage mode)

      DSSSD bias & leakage currents OK - see attachment 

Attached is the updated leakage current spreadsheet (Attachment 1)  as pf 5/11/2016 it is up to date with the elog.

Also added is the recording of ambient temperature. This is recorded in degrees C and plotted relative to 21 degrees C to better show on the same plot as leakage currents. (Screenshot in attachement 2)

Also attached is the spreadsheet in csv formatting.

10.55 DAQ found to have stopped at 06:47 during LN fill cycle.

10:57 Screen shots of system after stop

11.20 R122 started.
      System check screen shots attached at 11:08

18.20 System been running stably all day. Leakage currents attachments 14+15.
      LN2 fill cycle shortly, anticipate DAQ stop.

19.16 DAQ stopped.
      Closed file R122.

19.37 Temp 25.3 DP 6.1 Hum 31.1
      Added 2 extra stacks of lead bricks to protect AIDA. Now ~15cm of lead (Attachment 17)

23.30 DSSSD bias & leakage currents OK - see attachments 18-19
      FEE74 temperatures OK - see attachment 20

23.54 DAQ starts (R124)
      Merge rate 1.8M items/s, c. 13Mb/s to disk c. x2 earlier rates
      Dominated by significantly higher rates from DSSSD#1 
      FEE64 #17 ASIC 2*L pulser peak widths ~300 ch FWHM 
      Needs to be investigated at next entry opportunity

Stack of Pb bricks upstream of AIDA+BRIKEN to protect from incoming beam.

13.35 Swapped HDMI cables from master MACB to MACB #3 & #7
      for HDMI cables from MACB #7 ports 1 & 2 to MACB modules #8 & #9

      ReSYNC and stsrem wide test failures - see attachments 1-5

15.00 Swap HDMI cable from MACB #2 port 1 to MACB #3 next

      ReSYNC and system wide test fails - see attachments 6-10

      *Conclusion* all of HDMI cables between HDMI cable from nnaida6 and master MACB
      have now been swapped for other HDMI cables between MACB # 7 and MACB # 8, 9, 10
      but we still observe ReSYNC and clock issues 

16.05 CG points out that I have misinterpreted Elog 258 - switch back MAC
      mode settings to the following

      MACB #  1  2  3  4  5  6  7  8  9 10 11      spare 1   spare 2
      Mode    5  2  2  3  3  3  3  3  3  3  3
      Rev B      y  y                              50MHz?    y

      FEE64 power cycle

      ReSYNC and system wide fails - see attachments 11-16


16,50 Re-considering options
      Install MACB #11 (rev B) mode 0
      Will attempt to use 25MHz correlation scaler clock NIM output from master MACB to BRIKEN+RIBFDAQ

      Power cycle FEE64s

      ReSYNC OK
      System wide checks OK but some issues remain - see attachments 17-25

17.10 DAQ starts
      Writing to disk file R115, merge rate 0.9M data items/, TapeServer ~7Mb/s

17.20 Analysis of R115_1 confirms ADC data synchronised - see attachment 26

17.25 MERGE stats look OK - see attachments 27-29

17.35 System wide tests SYNC errors & SYNC pulses OK

17.38 DAQ stalled - manual start of ORNL clover LN2 fill cycle by Nishimura-san
      Most recent file R115_5 last accessed 17.38

      DAQ stop OK

      Disable histogram and data transfer #1 
      DAQ RESET
      DAQ SETUP
      Restart merger and TapeServer
      Enable histogram and data transfer #1 

17.47 DAQ start (R116)

17.58 DAQ stopped again at end of fill cycle.
      1. Disable histogram and data transfer #1
      2. DAQ RESET
      3. DAQ SETUP
      4. Restart merger and TapeServer
      5. Enable histogram and data transfer #1 
      Had to repeat 1-5 multiple times to get all links working with the merger. R117 created during this (empty).

18.08 Run R118 started.

18.45 TD changing things for runs R119-R120.

18.50 Run R121 started.
      First few minutes are pulser run 30-10,000 @ 250Hz on coarse dial.

18.54 Beam ON.
      Continuing R121. Pb shield immediately after final MUSIC detector.

21.35 DAQ continues OK
      Most recent file R121_30

      All system-wide tests OK *but* note nnaida5 now fails clock status test in addition to combinations of
nnaida7/8/15/16
      Merge/Tapeserver desktop, Merge statistics 
      - see attachments 30-36

21.45 R121_32 ADC data synchronised

Overnight

Phong Vi completed the pulser walkthrough interrupted earlier this evening.
BNC PB-4 amplitude settings 30,000 - 20,000 @ 10,000 step, 8,000-2,000 @ 2,000 step  
The data is in files R121_62, _63 and _64 (which have been copied to d05 for further analysis).

00.40-02.30 Discussion with PJCS
 
      Confirm both NIM bin voltages OK

      Move master MACB to lower NIM bin (with BNC PB_4, Ortec 433, 2x CAEN N1419B, 1x CAEN N1419)
       successful ReSYNC
       system-wide checks clock test fails from zero to all of the following FEE64s - nnaida7, 8, 15 & 16
       SYNC count test OK *except* nnaida19 which has greater number of SYNC pulses
       online analysis indicates nnaida19 ADC data not synchronised with other FEE64s by ~200ms

      Replace master MACB rev B mode 0 with MACB module #13 mode 5 (external clock 50MHz TTL)
      Move MACB module 2 from upper NIM bin to lower NIM bin
      Swap nnaida19/port1 <-> nnaida20/port2 

      Power cycle FEE64s and restart
      System wide checks fail - see attachments 1-4

      Re-seat HDMI cabling master MACB -> MACB modules 3-6
      System wide checks fail - see attachments 7-10

      Swap ports of 2x HDMI cables from master MACB
      Power cycle FEE64s
      Re_SYNC & system wide checks fail - see attachments 11-15

10.20 ReSYNC fails for all TS_SYNC_PHASE settings 0-3

      DK checks MACB mode settings
      master -> 5
      module #2 2
      module #3 2
      modules #4-11 3

      Check HDMI cable seating nnaida6 to master MACB

      No change - ReSYNC fails, system wide checks fail as before

      Per PJCS e-mail check MACB settings per https://elog.ph.ed.ac.uk/AIDA/258
      and change MACB module # 7 from mode 3 to mode 2. MACB settings are now

      MACB #  1  2  3  4  5  6  7  8  9 10 11      spare 1   spare 2
      Mode    5  2  3  3  3  3  2  3  3  3  3
      Rev B      y  y                              50MHz?    y

      *BUT* remember the system has been in the previous state since Elog 258
      abd has been working OK

      No change - ReSYNC fails, system wide checks fail as before

      Check 50MHz TTL external clock signal and observe transients and width changes
      in clock signal - see attachment 16
      This may not be *the* explanation of current problems but I doubt the the hardware
      will be 'happy' with it either

      JAR cycles NIM signal through NIM-TTL signal converter several times to produce
      better (no transients or width changes) clock signal with c. 3.2V amplitude

      Power cycle and restart FEE64s
      No change - ReSYNC and system wide checks fail - see attachments 17-21

12.40 Re-checked HDMI cabling 
      found master MACB port 1 -> MACB #7 next, port 2 -> MACB #3 next
      change to master MACB port 1 -> MACB #3 next, port 2 -> MACB #7 next
      Power cycle FEE64s

      ReSYNC partial failure (left side OK, right side of tree fails), system wide checks fail - see attachments
22-26

13.05 Swap HDMI cables from master MACB to parents, i.e. HDMI cable master port 1 to MACB #3 next
      changes to master port 2 to MACB #7 next 

      ReSYNC and system wide checks fail - see attachments 30-34
      

Assumes 3-phase ac power (to Julabo FL11006 recirculating chiller) and single-phase ac power
(to AIDA NIM bins, PSUs, network switches, USB-controlled ac mains relay and Raspberry Pi)
is connected and switched on.


All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.

AIDA has multiple, independent data acquisition servers connected by an Ethernet network.

Response times to commands, information updates etc are ~10-60s - please be patient!


1) Start Julabo FL11006 Recirculating Chiller

   See manual (page 19)  http://www2.ph.ed.ac.uk/~td/AIDA/Information/Julabo%20FL11006.pdf 
    
   Set point +20 deg C

   Check flow of coolant by inspecting the two flow indicators which are located on top of
   the AIDA stand

   Do NOT proceed if the Julabo FL11006 Recirculating Chiller is not operating, or if there
   is little, or no, flow in one, or both, flow indicators.

2) Start interface to USB-controlled ac mains relay to AIDA data acquisition servers

   On the AIDA Dell T410 Workstation aidas1 switch to Desktop 7 and start a Firefox web browser
   
   Enter URL   http://nnrpi1:8015/AIDA/Rly16/

   See attachment 1

   Select 'Sequence ALL On' to powerup the AIDA data acquisition servers

   Check all relays Relay 1 to Relay 8 move from the 'Switch ON' to 'Switch OFF' row

   See attachment 2

   Wait 10 minutes (yes - really!) before proceeding

3) Start Httpd Data Acquisition server

   See attachment 3

   Switch to Desktop 1 and select the yellow MIDAS icon 'Httpd for DataAcquisition' which will start a terminal
   to display server messages as follows

System identified is CPU x86_64; Platform is unix; OS is Linux and Version is 2.6.32-504.8.1.el6.x86_64
Environment selected is CPU x64_64; Platform unix; OS Linux64 and Operating System Linux64
MIDASBASE = /MIDAS@aidas and MIDAS_LIBRARY = /MIDAS@aidas/TclHttpd/Linux64
PATH =
/MIDAS@aidas/bin_Linux64:/MIDAS@aidas/TclHttpd/Linux64:/homes/npg/root/bin:/homes/npg/root/bin:/homes/npg/root/lib:/MIDAS/Linux/bin64:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin
package limit is not available: can't find package limit
Running with default file descriptor limit
package setuid is not available: can't find package setuid
Could not change to user 50 group 50: not owner
/debug user "debug" password "jhi+u8jzdbpl"
httpd started on port 8015

Custom startup from /MIDAS@aidas/config/TclHttpd/aidas1@8015/startup.tcl
DefineMessage defined with server at http://elog.ph.ed.ac.uk:8015/MessageLoggerServer
/DataBaseAccessServer
/NetVarService
/SigTaskService
Loaded MemSasAccess
/SpectrumService
loading tcl/AIDARunControl.tcl for namespace ::
RunControlClient provided
RunControlClient loaded
Completed custom startup from /MIDAS@aidas/TclHttpd/Html/AIDA/RunControl/stats.defn.tcl

   See attachment 4

4) Start web browser for interface to AIDA

   Switch to Desktop 1 and start Firefox web browser

   Enter URL     localhost:8015

   See attachment 5

5) Commence startup of AIDA interface

   Select 'AIDA Experiment Control'

   See attachment 6

6) From AIDA Experiment Control tab 

   Select 'AIDA Hardware Control'

   See attachment 7

   Select 'Data Acquisition Run Control'

7) Reset and setup all data acquisition servers

   From 'Data Acquisition Run Control' tab

   See attachment 8

   Select 'Act On ALL Data Acquisition Servers'

   The web page will update (~20s) to show the status of all of the configured AIDA FEE64
   data acquisition servers which are named nnaida1, nnaida2 ... etc

   See attachment 9

   Select 'Reset'

   Wait for update and check that the state of *all* data acquisition servers is 'reset'

   Select 'Setup'

   Wait for timestamp re-synchronisation pop-up

   See attachments 10-11

   Usually all data acquisition servers (nnaida1, nnaida2 ... etc) will ReSYNC OK and you may proceed to step 8.

   Sometimes one, or more, data acquisition servers report ReSYNC not complete.

   Re-select the 'AIDA Experiment Control' tab and select 'AIDA Hardware Control'

   See attachments 12-13

   From the 'AIDA Hardware Control' tab select 'Master Timestamp Control'

   From the 'Master Timestamp Control' tab

   Select 'Reload'

   Select FEE64 -> nnaida6

   Select 'Perform ReSYNC'

   Wait for timestamp re-synchronisation pop-up.
   All data acquisition servers 9Nnaida1, nnaoida2 .. etc) should ReSYNC OK - if they do not
   please seek expert help

8) Start ASIC controls

   Re-select the 'AIDA Experiment Control' tab and select 'AIDA Hardware Control'

   See attachments 12-13

   Select 'ASIC Control'

   See attachment 14

   From 'ASIC Control' tab
     select 'Act on ALL FEE64 modules' and await page update
     select 'Act on ALL ASICs' and await page update

   See attachment 15

9) Check FEE64 operating temperatures

   Re-select the 'AIDA Hardware Control' tab and select 'FEE Temperatures'

   See attachment 16

   Check temperatures

       Virtex < 70 deg C
       PSU    < 45 deg C
       ASIC   < 70 deg C

   Note that the ASIC temperatures for some data acquisition servers sometimes read back as 0.0
   *If the temperature values above are exceeded switch off AIDA FEE64 electrical power* as follows
   
   Desktop 6 - Firefox web browser

   From 'Rly16 Control' select 'Switch ALL off' and *now* seek expert help

10) Perform system-wide diagnostic checks

    Re-select the 'AIDA Hardware Control' tab and select 'System Wide Checks'

    See attachments 17-18

11) Start servers for data merging and output to disk

    Switch to Desktop 2 and start the 'Httpd for Merge/TapeServer', 'Merger' and 'TapeServer' servers
    by selecting the three adjacent MIDAS in sequence

    See attachment 19

    Three terminal sessions will pop-up to display server messages. These terminals should be moved to
    left of the desktop and arranged as shown 

    See attachment 20

    This will enable you to simultaneously observe the latest messages from each server and the activity
    spinners of the Merger and TapeServer servers 

12) Start web interface to Merger and TapeServer

    Start Firefox web browser

    Enter URL     localhost:8115

    See attachment 21

13) Open data file

    Select 'Tape Service'

    See attachment 22

    In the 'TapeServer Service' tab complete the Volume Name, Run Name and Run Number fields.
    Typically the volume name will the experiment ID (e.g. NP1234) and Run Name (R). 

    See attachment 23

    Select 'Go' 

    See attachment 24

    This will create an experiment directory if it does not already exist (e.g. /TapeData/NP1234)
    and will open a data file within this directory with a filename concatenating the Run Name
    and Run Number fields - if the selected file already exists a new filename (Run Number) will
    be suggested

14) Setup merger

    Re-select the 'AIDA' tab and select 'MERGE Control'

    See attachment 25

    Select 'Setup & Configure'

    See attachment 26

    Select 'Go'

    See attachment 27

    Select 'Toggle Merge Program Pause State' 

    See attachment 28

15) Enable histogramming and data transfer #1 links

    Switch to Desktop 1 and re-select 'Data Acquisition Run Control' tab

    Select Histogramming 'Enable All' and Data Transfer #1 'Enable All'

16) AIDA is now ready to commence collecting data 
    - you can proceed from step 5 of https://elog.ph.ed.ac.uk/AIDA/412

10.20 DAQ found stalled

      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      AIDA SYNC stats - see attachment 4 - stats 10.1M/381/3600 => DAQ stalled at 23.05 + 7.4h => c.06.29
      System wide checks OK *except* SYNC pulses & SYNC errors - see attachments 5-8

      Conclude DAQ stalling at c. 06.30/18.30 due to start of ORNL LN2 dewar refill cycle
      but unrelated to either the BRIKEN-supplied 50MHz TTL clock signal to external clock
      input of Master MACB or the ground connection provided by this coaxial cable.

      Which implies the problem is either EMI/RFI or ac mains electrical ground. 

      AIDA powered by two single phase outlets from one of four sections of a single phase ac mains distribution
      box with power supplied by two heavy duty (3cm dia) cables from Denkenseiki Noisecut AVR type PMN (AVR4, B3F
      104V/51A). AIDA is connected to both NEMA 5-15R-style outlets of section A, LN2 refill to section D, BRIKEN
      to sections B, C and D.

      Ambient temperature +24.8 deg C, d.p. +4.1 deg C, RH 26.3%

15.00 DSSSD cabling drain wire attachment to AIDA adaptor PCB (FEE64 # 5 & 6) not tightly secured.
      CG re-secured drain wire and this has significantly reduced 100kHz period transient noise
      as observed at preamplifier outputs.

14.48 Restart DAQ (R110)
      Master MACB mode 5, 50MHz TTL clock to external clock input

14.57 DAQ stalled

      All system wide checks OK *except* SYNC errors - see attachment 9
      ASIC clock timestamp - nnaida19 fails 
      N.B. SYNC pulses check OK, counters incrementing between successive tests
      The latter is a problem we have seen previously but has not stopped DAQ running OK

aidas1> ./analyser /TapeData/Sept2016/R110_2
 *** TDR format 3.3.0 analyser - TD - October 2016
 *** ERROR: READ I/O error:       5002
                   blocks:      11861
          ADC data format:   82556471 (  877427.0 Hz)
        Other data format:   14217428 (  151105.7 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         27 (       0.3 Hz)
                               RESUME:         27 (       0.3 Hz)
                              SYNC100:     861083 (    9151.8 Hz)
                           FEE64 disc:   13353468 (  141923.4 Hz)
                             MBS info:       2823 (      30.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:       1976 (      21.0 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:       94.089 s
 FEE  elapsed dead time(s) elapsed idle time(s)
  1                0.084                0.000
  2                0.076                0.000
  3                0.000                0.000
  4                0.000                0.000
  5                0.109                0.000
  6                0.012                0.000
  7                0.000                0.000
  8                0.000                0.000
  9                0.003                0.000
 10                0.000                0.000
 11                0.000                0.000
 12                0.000                0.000
 13                0.000                0.000
 14                0.000                0.000
 15                0.032                0.000
 16                0.013                0.000
 17                0.000                0.000
 18                0.000                0.000
 19                0.125                0.000
 20                0.000                0.000
 21                0.000                0.000
 22                0.000                0.000
 23                0.142                0.149
 24                0.076                0.000
 25                0.000                0.000
 26                0.000                0.000
 27                0.000                0.000
 28                0.000                0.000
 29                0.000                0.000
 30                0.000                0.000
 31                0.000                0.000
 32                0.000                0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS      Other  
HEC Data
  0          0          0          0          0          0          0          0          0          0          0  
       0
  1     942953    5806860          0          0          3          3      35855    5770999          0          0  
      42
  2    4036003    4268394          0          0          2          2      35861    4232529          0          0  
       0
  3    3038422      39132          0          0          0          0      35892       3240          0          0  
       0
  4    1192440      42063          0          0          0          0      35889       6174          0          0  
      68
  5    5685966      39310          0          0          5          5      35849       3451          0          0  
       0
  6    3670394      46605          0          0          2          2      35885       7893       2823          0  
      70
  7    2661022      43508          0          0          0          0      35890       7618          0          0  
     231
  8    2165335      41382          0          0          0          0      35890       5492          0          0  
     359
  9    3037520     863964          0          0          1          1      35889     828073          0          0  
       0
 10    2616647     179334          0          0          0          0      35889     143445          0          0  
       0
 11    1083633      39064          0          0          0          0      35889       3175          0          0  
       0
 12    1759629      38368          0          0          0          0      35888       2480          0          0  
       0
 13    2419715     280498          0          0          0          0      35891     244607          0          0  
       0
 14    3189205    1325559          0          0          0          0      35887    1289672          0          0  
     747
 15    4886680      39482          0          0          2          2      35871       3607          0          0  
       7
 16    5087977      38869          0          0          1          1      35886       2981          0          0  
       0
 17    2905638     329411          0          0          0          0      35888     293523          0          0  
       0
 18    3327386      46016          0          0          0          0      35888      10128          0          0  
       0
 19    6770177      40711          0          0          4          4      35842       4861          0          0  
       7
 20    2225755      38524          0          0          0          0      35891       2633          0          0  
     344
 21    2061728      40299          0          0          0          0      35887       4412          0          0  
      90
 22    3052329     512109          0          0          0          0      35890     476219          0          0  
       7
 23    9325689      38673          0          0          3          3      35834       2833          0          0  
       3
 24    5414228      39293          0          0          4          4      35862       3423          0          0  
       1
 25          0          0          0          0          0          0          0          0          0          0  
       0
 26          0          0          0          0          0          0          0          0          0          0  
       0
 27          0          0          0          0          0          0          0          0          0          0  
       0
 28          0          0          0          0          0          0          0          0          0          0  
       0
 29          0          0          0          0          0          0          0          0          0          0  
       0
 30          0          0          0          0          0          0          0          0          0          0  
       0
 31          0          0          0          0          0          0          0          0          0          0  
       0
 32          0          0          0          0          0          0          0          0          0          0  
       0

 *** Timewarps
 FEE       ADC      Pause     Resume    SYNC100       Disc        MBS  Undefined    Samples
  0          0          0          0          0          0          0          0          0
  1          0          0          0          0          0          0          0          0
  2          0          0          0          0          0          0          0          0
  3          0          0          0          0          0          0          0          0
  4          0          0          0          0          0          0          0          0
  5          0          0          0          0          0          0          0          0
  6          0          0          0          0          0          0          0          0
  7          0          0          0          0          0          0          0          0
  8          0          0          0          0          0          0          0          0
  9          0          0          0          0          0          0          0          0
 10          0          0          0          0          0          0          0          0
 11          0          0          0          0          0          0          0          0
 12          0          0          0          0          0          0          0          0
 13          0          0          0          0          0          0          0          0
 14          0          0          0          0          0          0          0          0
 15          0          0          0          0          0          0          0          0
 16          0          0          0          0          0          0          0          0
 17          0          0          0          0          0          0          0          0
 18          0          0          0          0          0          0          0          0
 19          0          0          0          0          0          0          0          0
 20          0          0          0          0          0          0          0          0
 21          0          0          0          0          0          0          0          0
 22          0          0          0          0          0          0          0          0
 23          0          0          0          0          0          0          0          0
 24          0          0          0          0          0          0          0          0
 25          0          0          0          0          0          0          0          0
 26          0          0          0          0          0          0          0          0
 27          0          0          0          0          0          0          0          0
 28          0          0          0          0          0          0          0          0
 29          0          0          0          0          0          0          0          0
 30          0          0          0          0          0          0          0          0
 31          0          0          0          0          0          0          0          0
 32          0          0          0          0          0          0          0          0

 *** Program elapsed time:    1.500s ( 7907.333 blocks/s, 494.208 Mb/s)

15.48 Restart aidas1
      Power cycle FEE64s

      Restart AIDA DAQ

      Same problem - DAQ stall (no output from merger) at, or shortly after, Start ASIC Readout with
      multiple FEE64s with zero AIDA SYNC rate
      *All* system wide checks OK

      Cannot recover DAQ control of FEE64s with merger restart - power cycle FEE64s again


23.58 Attempt to change master MACB from MACB module #11 mode 5 to MACB module #13 mode 0

      Successive fuse failures of USB ac mains relay

      System wide ASIC clock timestamp check nnaida 5/6/7/8 13/14/15/16 21/22/23/24 i.e. first half of MACB tree

      Re-seat HDMI cabling from  master MACB root module to first half of MACB tree - ReSYNC fails - see attachments
10 & 11

   

08.56 DAQ continues OK

      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System wide checks OK *except* SYNC pulses - see attachments 4-6

      Most recent file R101_249 ADC & disc data synchronised - see attachments 7-8
      spectrum s1000 - per ASIC data items as function of timestamp (20us/channel)
      spectra 1-32 and 100-132 per FEE64 data items as function of timestamp (20us/channel)

09.03 DAQ stopped


17.10 DAQ started (R103) no storage mode
      Master MACB module #1 mode 0, 50MHz TTL clock signal cable disconnected from MACB rear panel.

18.55 Checked DAQ status and it has stopped. No file write times so can't easily check exactly when (see SYNC
stat page to calculate).
      All system checks passed except SYNC errors (see attachments 9-12)
      Upon attempting to Stop the DAQ, could not contact nnaida11.

      AIDA SYNC statistics c. 1.76M SYNCs per FEE64. SYNC rate = 381Hz => elapsed time c. 1.3h => DAQ stalled c.
18.30

23.05 DAQ started (R104) no storage mode
      Master MACB module #1 mode 0, 50MHz TTL clock signal cable disconnected from MACB rear panel.

11.24 DAQ found stalled
      Most recent file R95_168 last accessed 06.31

      R95_168 ADC & disc data synchronised - see attachment 8
      spectrum s1000 - per ASIC data items as function of timestamp (20us/channel)

aidas1> ./analyser /TapeData/Sept2016/R95_168
 *** TDR format 3.3.0 analyser - TD - October 2016
 *** ERROR: READ I/O error:       5002
                   blocks:      14568
          ADC data format:  108169612 ( 1126585.0 Hz)
        Other data format:   10690700 (  111343.5 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         31 (       0.3 Hz)
                               RESUME:         30 (       0.3 Hz)
                              SYNC100:     877566 (    9139.8 Hz)
                           FEE64 disc:    9810241 (  102173.5 Hz)
                             MBS info:       2832 (      29.5 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:       2160 (      22.5 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:       96.015 s
 FEE  elapsed dead time(s) elapsed idle time(s)
  1                0.000                0.000
  2                0.000                0.000
  3                0.000                0.000
  4                0.000                0.000
  5                1.994                2.016
  6                1.408                1.439
  7                0.000                0.000
  8                0.000                0.000
  9                0.000                0.000
 10                0.000                0.000
 11                0.000                0.000
 12                0.000                0.000
 13                0.000                0.000
 14                0.000                0.000
 15                0.015                0.000
 16                0.000                0.000
 17                0.000                0.000
 18                0.000                0.000
 19                0.045                0.000
 20                0.000                0.000
 21                0.000                0.000
 22                0.000                0.000
 23                0.099                0.000
 24                0.000                0.000
 25                0.000                0.000
 26                0.000                0.000
 27                0.000                0.000
 28                0.000                0.000
 29                0.000                0.000
 30                0.000                0.000
 31                0.000                0.000
 32                0.000                0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS     
Other   HEC Data
  0          0          0          0          0          0          0          0          0          0         
0          0
  1     350112      43200          0          0          0          0      36623       6577          0         
0         48
  2    1247240      43778          0          0          0          0      36622       7156          0         
0          0
  3    2547061      39987          0          0          0          0      36626       3361          0         
0          0
  4     881007      40879          0          0          0          0      36623       4256          0         
0          5
  5   23965264    2536358          0          0         13         12      35831    2500502          0         
0         38
  6   23702370    1860427          0          0         11         11      36086    1821487       2832         
0        844
  7    1895595      40743          0          0          0          0      36623       4120          0         
0          1
  8    1603094      41634          0          0          0          0      36626       5008          0         
0        325
  9    3180182    1849501          0          0          0          0      36625    1812876          0         
0          0
 10    2576178      97708          0          0          0          0      36622      61086          0         
0          0
 11     447806      39812          0          0          0          0      36625       3187          0         
0          0
 12     905803      39001          0          0          0          0      36618       2383          0         
0          0
 13    2226595     147679          0          0          0          0      36624     111055          0         
0          0
 14    3021228    2593022          0          0          0          0      36626    2556396          0         
0        513
 15    4146089      40401          0          0          2          2      36617       3780          0         
0          0
 16    4264696      39555          0          0          0          0      36619       2936          0         
0          0
 17    2934508     416504          0          0          0          0      36623     379881          0         
0          0
 18    3319005      56583          0          0          0          0      36619      19964          0         
0          0
 19    6346836      41482          0          0          2          2      36604       4874          0         
0          1
 20    2392653      39249          0          0          0          0      36623       2626          0         
0        283
 21    2056421      41512          0          0          0          0      36622       4890          0         
0         96
 22    2824822     522339          0          0          0          0      36624     485715          0         
0          5
 23    7402741      39352          0          0          3          3      36590       2756          0         
0          1
 24    3932306      39994          0          0          0          0      36625       3369          0         
0          0
 25          0          0          0          0          0          0          0          0          0         
0          0
 26          0          0          0          0          0          0          0          0          0         
0          0
 27          0          0          0          0          0          0          0          0          0         
0          0
 28          0          0          0          0          0          0          0          0          0         
0          0
 29          0          0          0          0          0          0          0          0          0         
0          0
 30          0          0          0          0          0          0          0          0          0         
0          0
 31          0          0          0          0          0          0          0          0          0         
0          0
 32          0          0          0          0          0          0          0          0          0         
0          0

 *** Timewarps
 FEE       ADC      Pause     Resume    SYNC100       Disc        MBS  Undefined    Samples
  0          0          0          0          0          0          0          0          0
  1          0          0          0          0          0          0          0          0
  2          0          0          0          0          0          0          0          0
  3          0          0          0          0          0          0          0          0
  4          0          0          0          0          0          0          0          0
  5          0          0          0          0          0          0          0          0
  6          0          0          0          0          0          0          0          0
  7          0          0          0          0          0          0          0          0
  8          0          0          0          0          0          0          0          0
  9          0          0          0          0          0          0          0          0
 10          0          0          0          0          0          0          0          0
 11          0          0          0          0          0          0          0          0
 12          0          0          0          0          0          0          0          0
 13          0          0          0          0          0          0          0          0
 14          0          0          0          0          0          0          0          0
 15          0          0          0          0          0          0          0          0
 16          0          0          0          0          0          0          0          0
 17          0          0          0          0          0          0          0          0
 18          0          0          0          0          0          0          0          0
 19          0          0          0          0          0          0          0          0
 20          0          0          0          0          0          0          0          0
 21          0          0          0          0          0          0          0          0
 22          0          0          0          0          0          0          0          0
 23          0          0          0          0          0          0          0          0
 24          0          0          0          0          0          0          0          0
 25          0          0          0          0          0          0          0          0
 26          0          0          0          0          0          0          0          0
 27          0          0          0          0          0          0          0          0
 28          0          0          0          0          0          0          0          0
 29          0          0          0          0          0          0          0          0
 30          0          0          0          0          0          0          0          0
 31          0          0          0          0          0          0          0          0
 32          0          0          0          0          0          0          0          0

 *** Program elapsed time:    2.449s ( 5948.019 blocks/s, 371.751 Mb/s)


      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System wide checks OK *except* SYNC pulses & errors - see attachments 4-7

      Restart merger
      DAQ STOP
      System wide checks 
      DAQ RESET & SETUP
      System-wide checks
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

11.46 Start DAQ (R96)

16.28 Stop DAQ OK

16.30 Start DAQ (R97)
      BNC PB-4 pulser OFF (background run)

17.04 Stop DAQ

17.08 Ambient temperature +25.0 deg C, d.p. +8.4 deg C, RH 34.8%

17.11 Start DAQ (R98)
      BNC PB-4 pulser ON
      60Co cource (10-7023) placed on top of AIDA snout approximately above DSSSD #3

17.30 DAQ stalled due to excessive diak activity from data copying & analysis tasks
      Power cycle required

18.09 DAQ start (R99)

18.38 DAQ stalled 
      Most recent file R99_7 last accessed 18.38
      Power cycle rquired

19.42 DAQ start (R101)
      BNC PB-4 pulser ON
      60Co cource (10-7023) placed on top of AIDA snout approximately above DSSSD #3
(Phong's correction: 60Co source position was in front of AIDA snout toward upstream)
      ASIC settings 2016Nov01-18.02.17

All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.

AIDA has multiple, independent data acquisition servers connected by an Ethernet network.

Response times to commands, information updates etc are ~10-60s - please be patient!


Every 4h

1) Desktop 7 - 2x PUTTY terminal sessions

   Each PUTTY terminal session is connected to a CAEN N1419 4 ch HV Power Supply 

   Addr 00

   Ch 0 = DSSSD # 1
    :
    :
   Ch 3 = DSSSD # 4

   Addr 01

   Ch 0 = DSSSD # 5
   Ch 1 = DSSSD # 6

   Sequentially select each terminal and obtain a screenshot (Alt-PrtScn) of DSSSD #1 = #6 detector
   bias voltages and leakage currents
   Upload screenshots to BRIKEN Elog

   If B2F/F11 ambient temperature information is available please add this information to the Elog

   Compare DSSSD leakage currents (and temperatures) with previous observations 

2) Desktop 1 - Firefox web browser - Temperatures tab

   Select 'Reload'

   Check temperatures

       Virtex < 70 deg C
       PSU    < 45 deg C
       ASIC   < 70 deg C


   Note that the ASIC temperatures for some data acquisition servers sometimes read back as 0.0

   *If the temperature values above are exceeded switch off AIDA FEE64 electrical power* as follows

   Desktop 6 - Firefox web browser

   From 'Rly16 Control' select 'Switch ALL off'

   and *now* seek expert help


*If* DAQ running also


3) Desktop 1 - Firefox web browser - Run Control tab

   Select 'Update'

   Check state of *all* data acquisition servers is 'going'
   Check histogramming and data transfer #1 are enabled as indicated by 'H X' tags

5) Desktop 2 - Firefox web browser - MERGE tab

   Select 'Reload'

   Check merge rate (~0.5-2M data items/s) consistent with value observed at start of run

   Observe active spinners in MERGE and TapeServer server terminal windows adjacent to web browser

6) Desktop 2 - Firefox web browser - TapeServer tab

   Select 'Reload'

   Check data rate consistent with value observed at start of run

All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.

AIDA has multiple, independent data acquisition servers connected by an Ethernet network.

Response times to commands, information updates etc are ~10-60s - please be patient!


How to Stop Run

1) Workspace 2 - Firefox web browser - TapeServer tab

   Select 'Reload'

   Check number of blocks written to disk is increasing

   See attachment 1

   If TapeServer data rate is zero see https://elog.ph.ed.ac.uk/AIDA/303

2) Workspace 2 - Firefox web browser - MERGE tab

   Select 'Reload'

   Check merge rate (~0.5-2M data items/s)

   See attachment 2

   If MERGER data rate is zero see https://elog.ph.ed.ac.uk/AIDA/303

3) Workspace 1 - Firefox web browser - Run Control tab

   Select 'Update'

   Check state of *all* data acquisition servers is 'going'
   Check histogramming and data transfer #1 are enabled as indicated by 'H X' tags

   Stop DAQ - select red 'STOP' button

   Wait (~60s) until state of all data acquisition servers (nnaida1, nnaida2 ... etc) updates 

   Check state of *all* data acquisition servers is 'stopped'
   Check histogramming and data transfer #1 are enabled as indicated by 'H X' tags

   See attachment 3

   N.B. Occasionally the state of all data acquisition servers does not change to 'stopped'
        and if this happens simply re-try by re-selecting 'STOP' 

4) Workspace 2 - Firefox web browser - MERGE tab

   Pause MERGE input - select 'Toggle Merge Program Pause State'

   See attachment 4

5) Workspace 2 - Firefox web browser - TapeServer tab

   Stop TapeServer and close disk file - select red 'STOP' button

   See attachment 5

6) Complete BRIKEN Elog with the following information

    AIDA
    run filename (e.g. R99)
    [# data blocks]
    start date & time
    [stop date & time]
    ASIC settings DB key
    additional comments
    your name

    Complete run sheet for written logbook

All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.

AIDA has multiple, independent data acquisition servers connected by an Ethernet network.

Response times to commands, information updates etc are ~10-60s - please be patient!



How To Start Run 

1) Workspace 1 - Firefox web browser - Run Control tab

   Select 'Update'

   Check DAQ stopped (green 'GO' button displayed)

   Check state of *all* data acquisition servers is 'stopped'
   Check histogramming and data transfer #1 is enabled for *all* data acquisition servers as indicated by 'H X' tags

   See attachment 1

2) Workspace 2 - Firefox web browser - TapeServer tab

   Select 'Reload'

   Check TapeServer stopped and disk file closed (green GO button displayed)

   See attachment 2

3) Workspace 2 - Firefox web browser - MERGE tab

   Select 'Reload'

   Check Merge Program paused - see banner 

   Merge State = GOing     :    paused     :    xfer enabled     :    output paused

   If not paused select 'Toggle Merge Program Pause State'

   See attachment 3

4) Workspace 1 - Firefox web browser - ASIC Control tab

   Select 'Reload'

   Check 'Act on ALL FEE64 modules?' selected

   Check 'Act on ALL ASICs' selected

   Select 'Select required function' -> 'Check ASIC Control'

   After ~60s a pop-up will appear showing the response from each ASIC of each data acquisition server.
   Check all ASICs are OK and status = 0x001F0000.
   Dismiss pop-up by selecting OK

   See attachments 4-5

5) Workspace 1 - Firefox web browser - Run Control tab 

   Start DAQ - select green GO button

   Wait (~60s) until state of all data acquisition servers (nnaida1, nnaida2 ... etc) updates 

   Check state of *all* data acquisition servers is 'going'
   Check histogramming and data transfer #1 is enabled for *all* data acquisition servers as indicated by 'H X' tags

   See attachment 6

6) Workspace 2 - Firefox web browser - MERGE tab

   Select 'Reload' several times and check *all* enabled data links (0-23) are active
         bright green = active, olive green = inactive, red = disabled 

   N.B. If some data links are inactive call for expert help and do NOT proceed!

   Observe active spinner in MERGER server terminal window

   See attachment 7

7) Workspace 2 - Firefox web browser - TapeServer tab

   Check 'Volume Name' and 'File Name'

   Start TapeServer and open disk file - select green 'GO' button

   See attachment 8

8) Workspace 2 - Firefox web browser - MERGE tab

   Select 'Reload' several times and check all enabled data links (0-23) are always active
         bright green = active, olive green = inactive, red = disabled 

   N.B. If some data links are *always* inactive call for expert help and do NOT proceed!

   Select 'Toggle Merge Program Pause State' to enable data merging 

   Select 'Reload' to observe merge rate (~ 9000 data items/s)

   Observe active spinners in MERGE and TapeServer server terminal windows adjacent to web browser

   See attachment 9

9) Workspace 1 - Firefox web browser - Run Control tab

   Select 'Start ASIC Data Readout'

   See attachment 10

10) Workspace 2 - Firefox web browser - MERGE tab

    Select Reload several times and check all enabled data links (0-23) are active
         bright green = active, olive green = inactive, red = disabled 

    N.B. If some data links are *never* active call for expert help and do NOT proceed!

    Select 'Reload' to observe merge rate (~ 0.5-2M data items/s)

    See attachment 11

11) Workspace 2 - Firefox web browser - TapeServer tab

    Select 'Reload' and observe number of blocks written to disk increasing

    See attachment 12

12) Workspace 1 - Firefox web browser - Control tab

    Select 'Save/Restore Settings'

    From 'Save/Restore Module Settings' tab

     select 'Reload'

     select 'Module Names' whose settings should be saved (usually all)

     select 'Generate new DB key' and make a note of the DB key generated
          the DB key will have the format YYYYMMMDD-HH.MM.SS

          The DB key will be used to name a directory to store AIDA settings
          and is created uid: npg, gid: npgstaff, perms 755. However, its
          contents are written uid: nfsnobody, gid nfsnobody. The default
          directory (DB Key) permissions do not work - change the permissions
          to 777 - before attempting to save data to this directory (DB Key).

     launch a terminal and change the permissions of the DB key directory using the command

     chmod 777 /MIDAS/DB/EXPERIMENTS/AIDA/[YYYYMMMDD-HH.MM.SS]

     select 'Save Settings' to save AIDA ASIC, LED and waveform settings to
     the directory (DB key)

11) Update BRIKEN Elog with the following information

    AIDA
    run filename (e.g. R99)
    [# data blocks]
    start date & time
    [stop date & time]
    ASIC settings DB key 
    additional comments
    your name

    Complete run sheet for written logbook

11.00 DAQ continues OK
      DAQ STOP OK
      Most recent files R91_568 last accessed 10.59

      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System wide checks OK *except* SYNC pulses & errors - see attachments 4-7

14.20 Per FEE64 screenshots p+n junction and n+n ohmic strip waveforms - see attachments 8-11
      Preamplifier output noise looks OK for all FEE64s *except* nnaida5 & nnaida6 (which
      have significantly higher ADC and disc rates than other FEE64s)

21.10 DAQ found stalled
      Most recent file R94_99 last accessed 18.35

      Restart merger
      DAQ STOP
      System wide checks 
      DAQ RESET & SETUP
      System-wide checks
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

21.16 DAQ start (R96)

The following spectrum layouts have been created

1  All Rate spectra
2  All HitRate Spectra
3  p+n junction strip 1.8.L spectra
4  n+n ohmic strip 1.8.L spectra
5  p+n junction strip 1.8.H spectra
6  n+n ohmic strip 1.8.H spectra
5  p+n junction strip 1.8.W waveforms
6  n+n ohmic strip 1.8.W waveforms

The layouts can be found in the directory ~/LayOut and should be copied to /tmp

N.B Currently you cannot restore a layout to a spectrum display with > 16 galleries.
    If spectrum display uses > 16 galleries, switch spectrum display to 16 galleries
    or less before restoring a spectrum layout.

Cannot restore layout if currently displaying >16 galleries

Obtain the error message 'loading Spectrum.tcl > can't read "dbtagx(31,1)": no such element in array'

10.53 DAQ found stalled 
      Most recent files R89_102 last accessed 07.17

      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      All system wide checks OK *except* Clock status, SYNC errors & SYNC pulses - see attachments 4-8 - unusual
messages/reports

      One merger error messages - link 18 - see attachment 9

      Restart merger
      DAQ STOP OK
      DAQ RESET & SETUP OK
      ReSYNC OK
      All system-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

      Standard soft reset did not work - one or more FEE64s dropped data transfer #1 link at DAQ GO

      Retry - one, more FEE64s indicate error state - run control tab unresponsive 

      Power cycle FEE64s 

Following analysis of AIDA ADC & disc readout ( see https://elog.ph.ed.ac.uk/AIDA/404 )
changed timestamp resolution from 1us/channel to 20.48us/channel


Offline sort (from disk file)

Attachments 1-3  s1-s32  # ADC data items per FEE64, s100-132  # disc data items per FEE64 (20.48us/channel)

Attachments 4-5  s1000   4 * ( module # - 1 ) + ASIC # versus timestamp (ch 0-95 ADC data, ch 100-195 disc data,
20.48us/channel)

Attachments 6-7  MIDASsort terminal session logs for *offline* sort


Online sort (from TapeServer)

Attachment 8     s1-s32  # ADC data items per FEE64, s100-132  # disc data items per FEE64 (20.48us/channel)

Attachments 9-10 s1000   4 * ( module # - 1 ) + ASIC # versus timestamp (ch 0-95 ADC data, ch 100-195 disc data,
20.48us/channel)

Attachments 11-12 MIDASsort terminal session logs for *online* sort

Attachment 13   MIDASsort FORTRAN sort routine sync.f

Attachment 14   Spectrum titles for the above sort routine

Note

1) data is discontinuous as a function of timestamp because we are sampling buffers
from the TapeServer rather than sorting all data as above
2) a low rate of timewarps is reported which appears to be an artifact of the buffer
sampling - no timewarps reported by analyses of the corresponding data files
 

11.30 DAQ continues (R87)
      System-wide checks OK *except* SYNC errors & SYNC pulses - see attachments 1-4

11.36 DSSSD bias & leakage currents OK - see attachments 5-8
      FEE64 temperatures OK - see attachment 9

16.46 DAQ continues (R87)
      System-wide checks OK *except* SYNC errors & SYNC pulses - see attachments 5-8

18.55 DAQ stalled
      Most recent file R87_274 last accessed 18.47

      Restart merger
      DAQ STOP
      System wide checks 
      DAQ RESET & SETUP
      System-wide checks
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

19.10 DAQ starts (R89)

14.12 DAQ stalled as expected
      Most recent file R86_245 last accessed 06.26

      DSSSD bias & leakage current OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
     
      Some merger errors messages - all link 4 - see attachment 4
  
      All system wide checks OK *except SYNC errors & SYNC pulses - see attachments 5-8

      Restart merger
      DAQ STOP OK
      DAQ RESET & SETUP OK
      ReSYNC OK
      All system-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

14.34 DAQ started (R87)

19.50 DAQ continues (R87)

      System-wide checks OK *except* SYNC errors & SYNC pulses - see attachments 9-12

Developing real-time AIDA data synchronisation test using MIDASsort

To illustrate AIDA readout, ADC and discriminator data from a pulser event is plotted as a function
of the 100MHz AIDA internal timestamp (1us/channel)

Attachment 1 -    nnaida8  number of ADC and discriminator data items
Attachment 2 - nnaida1-24  number of ADC and discriminator data items
Attachment 3 - 4*(FEE64 module # - 1) + ASIC # (ADC channels 0-95, disc channels 100-195) versus timestamp
(1us/channel)

The spectra clearly illustrate

- 500kHz ADC readout cycle
- discriminator readout precedes ADC readout by ~18us (this figure will be shaping time dependent)
- after-pulse due to pulser injection via simple charge terminator (no pole zero correction) 
  ~84us after start of ADC readout (this figure will be pulser decay time and shaping time dependent)

Note events were identified (delimited) by time periods > 2us between successive ADC data items  

14.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

14.35 DAQ restarted for test purposes

18.55 DAQ stalled as expected
      Most recent file R83_125 last accessed 18.30

      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      All system-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

20.48 DAQ starts (R86)
      LEC/MEC fast comparator 0xff -> 0x20

10.10 DAQ found stopped
      Most recent file R81_169, last accessed 06.26

      R81_169 ADC data synchronised

aidas1> ./analyser /TapeData/Sept2016/R81_169
 *** TDR format 3.3.0 analyser - TD - October 2016
 *** ERROR: READ I/O error:       5002
                   blocks:       8369
          ADC data format:   67712004 ( 1105598.7 Hz)
        Other data format:     570667 (    9317.8 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         17 (       0.3 Hz)
                               RESUME:         17 (       0.3 Hz)
                              SYNC100:     560442 (    9150.9 Hz)
                           FEE64 disc:       8352 (     136.4 Hz)
                             MBS info:       1839 (      30.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:         81 (       1.3 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:       61.245 s
 FEE  elapsed dead time(s) elapsed idle time(s)
  1                0.000                0.000
  2                0.000                0.000
  3                0.000                0.000
  4                0.000                0.000
  5                0.244                0.254
  6                0.181                0.191
  7                0.000                0.000
  8                0.000                0.000
  9                0.000                0.000
 10                0.000                0.000
 11                0.000                0.000
 12                0.000                0.000
 13                0.000                0.000
 14                0.000                0.000
 15                0.002                0.000
 16                0.000                0.000
 17                0.001                0.000
 18                0.002                0.000
 19                0.003                0.000
 20                0.000                0.000
 21                0.000                0.000
 22                0.000                0.000
 23                0.085                0.000
 24                0.000                0.000
 25                0.000                0.000
 26                0.000                0.000
 27                0.000                0.000
 28                0.000                0.000
 29                0.000                0.000
 30                0.000                0.000
 31                0.000                0.000
 32                0.000                0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS     
Other   HEC Data
  0          0          0          0          0          0          0          0          0          0         
0          0
  1     229453      23628          0          0          0          0      23359        269          0         
0         22
  2    2464367      23972          0          0          0          0      23362        610          0         
0          0
  3    1700233      23656          0          0          0          0      23358        298          0         
0          0
  4     650519      23359          0          0          0          0      23359          0          0         
0          0
  5   15435615      25773          0          0          4          4      23267       2498          0         
0          0
  6   15768889      25301          0          0          3          3      23291        165       1839         
0          0
  7     963142      23361          0          0          0          0      23361          0          0         
0          0
  8     773768      23661          0          0          0          0      23361        300          0         
0          0
  9    2244651      23523          0          0          0          0      23359        164          0         
0          0
 10    1833324      24095          0          0          0          0      23362        733          0         
0          0
 11     276357      23657          0          0          0          0      23362        295          0         
0          0
 12     542691      23359          0          0          0          0      23359          0          0         
0          0
 13    1695447      23996          0          0          0          0      23363        633          0         
0          0
 14    2181674      23530          0          0          0          0      23361        169          0         
0          0
 15    2203091      23362          0          0          1          1      23360          0          0         
0          0
 16    2179412      23361          0          0          0          0      23361          0          0         
0          0
 17    2317043      23549          0          0          1          1      23359        188          0         
0          0
 18    2579367      23969          0          0          1          1      23356        611          0         
0          0
 19    2589829      23664          0          0          3          3      23358        300          0         
0          0
 20    1296289      23357          0          0          0          0      23357          0          0         
0          0
 21    1624570      24024          0          0          0          0      23361        663          0         
0         59
 22     513131      23525          0          0          0          0      23360        165          0         
0          0
 23    3691921      23335          0          0          4          4      23327          0          0         
0          0
 24    1957221      23650          0          0          0          0      23359        291          0         
0          0
 25          0          0          0          0          0          0          0          0          0         
0          0
 26          0          0          0          0          0          0          0          0          0         
0          0
 27          0          0          0          0          0          0          0          0          0         
0          0
 28          0          0          0          0          0          0          0          0          0         
0          0
 29          0          0          0          0          0          0          0          0          0         
0          0
 30          0          0          0          0          0          0          0          0          0         
0          0
 31          0          0          0          0          0          0          0          0          0         
0          0
 32          0          0          0          0          0          0          0          0          0         
0          0

 *** Timewarps
 FEE       ADC      Pause     Resume    SYNC100       Disc        MBS  Undefined    Samples
  0          0          0          0          0          0          0          0          0
  1          0          0          0          0          0          0          0          0
  2          0          0          0          0          0          0          0          0
  3          0          0          0          0          0          0          0          0
  4          0          0          0          0          0          0          0          0
  5          0          0          0          0          0          0          0          0
  6          0          0          0          0          0          0          0          0
  7          0          0          0          0          0          0          0          0
  8          0          0          0          0          0          0          0          0
  9          0          0          0          0          0          0          0          0
 10          0          0          0          0          0          0          0          0
 11          0          0          0          0          0          0          0          0
 12          0          0          0          0          0          0          0          0
 13          0          0          0          0          0          0          0          0
 14          0          0          0          0          0          0          0          0
 15          0          0          0          0          0          0          0          0
 16          0          0          0          0          0          0          0          0
 17          0          0          0          0          0          0          0          0
 18          0          0          0          0          0          0          0          0
 19          0          0          0          0          0          0          0          0
 20          0          0          0          0          0          0          0          0
 21          0          0          0          0          0          0          0          0
 22          0          0          0          0          0          0          0          0
 23          0          0          0          0          0          0          0          0
 24          0          0          0          0          0          0          0          0
 25          0          0          0          0          0          0          0          0
 26          0          0          0          0          0          0          0          0
 27          0          0          0          0          0          0          0          0
 28          0          0          0          0          0          0          0          0
 29          0          0          0          0          0          0          0          0
 30          0          0          0          0          0          0          0          0
 31          0          0          0          0          0          0          0          0
 32          0          0          0          0          0          0          0          0

 *** Program elapsed time:    0.957s ( 8744.751 blocks/s, 546.547 Mb/s)

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System-wide checks OK *except* SYNC errors & SYNC pulses - see attachments 4-7 
      Merger error messages - see attachment 8

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      All system-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

10.22 DAQ starts (R82)

16.07 DAQ continues OK
      All system-wide checks OK

17.16 DAQ continues OK
      All system-wide checks OK

18.27 All system wide checks OK *except* SYNC pulses - see attachment 9

18.34 DAQ stalled
      Most recent file R82_125 last accessed 18.30

      All system wide checks OK *except* SYNC errors and SYNC pulses - see attachments 10-13

18.47 AIDA -> safe state
      FEE64 power OFF
      DSSSD bias OFF

10.47 DAQ found stopped, no merger error messages
      Most recent file R78_281, last accessed 06.46

      R78_281 ADC data synchronised

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System-wide checks - see attachments 4-11 

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

11.07 DAQ starts (R79)

18.39 DAQ OK

      System wide checks OK *except* SYNC errors & SYNC pulses - see attachments 12-15

18.47 DAQ stalls
      Most recent file R79_182, last accessed 18.46
      System wide checks OK *except* SYNC errors & SYNC pulses - see attachments 16-19

18.56 DAQ starts (R80)

Merger crashed during operation - see https://elog.ph.ed.ac.uk/AIDA/399

10.34 DAQ found stopped, no merger error messages
      Most recent file R74_296, last accessed 06.31

      R70_315 ADC data synchronised

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      Some merger errors - see attachment 4

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

10.42 DAQ start (R75)

      nnaida11 drops data transfer #1 tag at SAQ GO

      DAQ STOP OK
      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

10.46 DAQ start (R76)

18.18 DAQ found stopped
      Most recent file R76_29 last accessed 11.52

      Merger crashed - see attachment 5

aidas1> ./analyser /TapeData//Sept2016/R76_29
 *** GREAT format 3.2.2 analyser - TD - October 2016
 *** ERROR: READ I/O error:       5002
                   blocks:      24384
          ADC data format:  197754460 ( 1539809.2 Hz)
        Other data format:    1194596 (    9301.7 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         74 (       0.6 Hz)
                               RESUME:         74 (       0.6 Hz)
                              SYNC100:    1172671 (    9131.0 Hz)
                           FEE64 disc:      18000 (     140.2 Hz)
                             MBS info:       3777 (      29.4 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        190 (       1.5 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 *** Timestamp elapsed time:      128.428 s
 FEE  elapsed dead time(s)
  1        0.000
  2        0.007
  3        0.000
  4        0.000
  5        0.674
  6        2.583
  7        0.000
  8        0.000
  9        0.000
 10        0.000
 11        0.000
 12        0.000
 13        0.000
 14        0.000
 15        0.276
 16        0.124
 17        0.435
 18        0.050
 19        0.622
 20        0.009
 21        0.000
 22        0.000
 23        0.352
 24        0.000
 25        0.000
 26        0.000
 27        0.000
 28        0.000
 29        0.000
 30        0.000
 31        0.000
 32        0.000

 *** Statistics
 FEE  ADC Data Other Data     Sample  Undefined      Pause     Resume    SYNC100       Disc        MBS     
Other   HEC Data
  0          0          0          0          0          0          0          0          0          0         
0          0
  1     566974      49807          0          0          0          0      48983        824          0         
0         62
  2    5617753      50240          0          0          2          2      48984       1252          0         
0          0
  3    4298949      49615          0          0          0          0      48983        632          0         
0          0
  4    1980475      48985          0          0          0          0      48985          0          0         
0          0
  5   31381665      53750          0          0         12         12      48726       5000          0         
0          0
  6   35397222      52131          0          0         12         12      48004        326       3777         
0          0
  7    3679182      48987          0          0          0          0      48987          0          0         
0          0
  8    3893833      49613          0          0          0          0      48983        630          0         
0          0
  9    4909194      49313          0          0          0          0      48987        326          0         
0          0
 10    4099868      50957          0          0          0          0      48984       1973          0         
0          0
 11    1590517      49623          0          0          0          0      48987        636          0         
0          0
 12    2103665      48985          0          0          0          0      48985          0          0         
0          0
 13    3909540      50385          0          0          0          0      48990       1395          0         
0          0
 14    5011678      49344          0          0          0          0      48988        356          0         
0          0
 15    8074527      48904          0          0         10         10      48883          1          0         
0          2
 16    8822855      48949          0          0          5          5      48939          0          0         
0          0
 17   11581998      49241          0          0         10         10      48820        401          0         
0          0
 18   17158740      50227          0          0          1          1      48968       1257          0         
0          0
 19   14684270      49399          0          0         11         11      48747        630          0         
0          0
 20    6793305      47946          0          0          1          1      47944          0          0         
0          0
 21    4052765      50377          0          0          0          0      48986       1391          0         
0        126
 22    1773964      49339          0          0          0          0      48988        351          0         
0          0
 23   10790840      48872          0          0         10         10      48852          0          0         
0          0
 24    5580681      49607          0          0          0          0      48988        619          0         
0          0
 25          0          0          0          0          0          0          0          0          0         
0          0
 26          0          0          0          0          0          0          0          0          0         
0          0
 27          0          0          0          0          0          0          0          0          0         
0          0
 28          0          0          0          0          0          0          0          0          0         
0          0
 29          0          0          0          0          0          0          0          0          0         
0          0
 30          0          0          0          0          0          0          0          0          0         
0          0
 31          0          0          0          0          0          0          0          0          0         
0          0
 32          0          0          0          0          0          0          0          0          0         
0          0

 *** Timewarps
 FEE   ADC  Pause Resume SYNC100  Disc    MBS Undef-d Samples
  0      0      0      0      0      0      0      0      0      0      0      0      0
  1      0      0      0      0      0      0      0      0      0      0      0      0
  2      0      0      0      0      0      0      0      0      0      0      0      0
  3      0      0      0      0      0      0      0      0      0      0      0      0
  4      0      0      0      0      0      0      0      0      0      0      0      0
  5      0      0      0      0      0      0      0      0      0      0      0      0
  6      0      0      0      0      0      0      0      0      0      0      0      0
  7      0      0      0      0      0      0      0      0      0      0      0      0
  8      0      0      0      0      0      0      0      0      0      0      0      0
  9      0      0      0      0      0      0      0      0      0      0      0      0
 10      0      0      0      0      0      0      0      0      0      0      0      0
 11      0      0      0      0      0      0      0      0      0      0      0      0
 12      0      0      0      0      0      0      0      0      0      0      0      0
 13      0      0      0      0      0      0      0      0      0      0      0      0
 14      0      0      0      0      0      0      0      0      0      0      0      0
 15      0      0      0      0      0      0      0      0      0      0      0      0
 16      0      0      0      0      0      0      0      0      0      0      0      0
 17      0      0      0      0      0      0      0      0      0      0      0      0
 18      0      0      0      0      0      0      0      0      0      0      0      0
 19      0      0      0      0      0      0      0      0      0      0      0      0
 20      0      0      0      0      0      0      0      0      0      0      0      0
 21      0      0      0      0      0      0      0      0      0      0      0      0
 22      0      0      0      0      0      0      0      0      0      0      0      0
 23      0      0      0      0      0      0      0      0      0      0      0      0
 24      0      0      0      0      0      0      0      0      0      0      0      0
 25      0      0      0      0      0      0      0      0      0      0      0      0
 26      0      0      0      0      0      0      0      0      0      0      0      0
 27      0      0      0      0      0      0      0      0      0      0      0      0
 28      0      0      0      0      0      0      0      0      0      0      0      0
 29      0      0      0      0      0      0      0      0      0      0      0      0
 30      0      0      0      0      0      0      0      0      0      0      0      0
 31      0      0      0      0      0      0      0      0      0      0      0      0
 32      0      0      0      0      0      0      0      0      0      0      0      0

 *** Program elapsed time:    3.586s ( 6799.896 blocks/s, 424.993 Mb/s)

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

18.50 DAQ starts (R77)

19.17 DAQ stalled due to disk housekeeping

      Restart merger OK
      DAQ STOP fails - nnaida1 timeout

      Power cycle FEE64s

19.47 DAQ starts (R78)

10.32 DAQ found stopped, no merger error messages
      Most recent file R70_315, last accessed 06.46

      R70_315 ADC data synchronised

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System-wide checks - SYNC errors & SYNC pulses fail - other checks OK - see attachments 4-7
      AIDA SYNC stats - see attachment 8

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

10.42 DAQ starts (R71)

18.25 DAQ stop OK

      System wide test all OK *except* SYNC errors - see attachments 8-11

      New SYNC error baseline

18.54 Repeat system wide checks whilst DAQ is still halted - SYNC errors *and* SYNC pulse now fail - see
attachments 12-15
      This may suggest that the clock signal itself is affected by LN2 fill cycle

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

18.59 DAQ starts (R72)
      nnaida15 drops data transfer #1 tag at DAQ GO

      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1
 
19.07 DAQ starts (R73)

19.17 DAQ stalled

      Restart merger OK
      DAQ STOP OK

      Syten wide checks - SYNC error and SYNC pulse fail - dissimilar FEE64 counts in SYNC pulse

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

19.37 DAQ starts (R74)



      

09.38 DAQ (R66) continues OK

      Detector bias and leakage currents OK - see attachments 1&2
      FEE64 temperatures OK - see attachment 3

      System wide checks SYNC count & SYNC errors fail - see attachments 4-7 - other checks OK

      R66_367 ADC data synchronised

      AIDA SYNC stats - attachment 8

      Some merger errors - see attachment 9

13.53 DAQ found stalled
      Most recent files R66_396 last accessed 10.55

      System wide checks SYNC count & SYNC errors fail - see attachments 10-13 - other checks OK

      AIDA SYNC stats - attachment 14

      No further merger error messages

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1      

14.02 DAQ starts (R67)

18.27 DAQ found stalled
      Most recent file R67_121 last accessed 18.26

      Restart merger
      DAQ STOP
      System wide checks 
      DAQ RESET & SETUP
      System-wide checks

18.39 DAQ start (R68)
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

18.44 DAQ stalled
      Most recent file R68_1 last accessed 18.44

      Restart merger
      DAQ STOP
      System wide checks 
      DAQ RESET & SETUP
      System-wide checks

18.53 DAQ starts (R70)

Original system configuration before my arrival: nnaida11 - 2b:22:6e
                                                 nnaida12 - 2b:33:15
                                                 nnaida13 - 2b:09:ce
All on firmware version 0x1900c1f.

With 8us shaping time and pulser amplitude @ 5V, FWHM [ch] were:

   Ch   | nnaida11 | nnaida12 | nnaida13 | nnaida14
  1.4.L |   38     |    33    |   38     |   34
  1.6.L |   24     |    25    |   28     |   23
  1.8.L |   20     |    17    |   17     |   16
 1.10.L |   21     |    17    |   17     |   16

Slightly higher than expected for a few channels, but FWHM fall within ~16-40ch for all channels in all FEEs.
All system checks passed.

nnaida13/14 kept constant throughout as control.

(1) Swapped nnaida11/12: nnaida11 -> 2b:33:0c     nnaida12 -> 2a:d0:1a
    Initially failed SYNC error test - consequence of old firmware version.
    Updated firmware from 0x10300c12 to 0x1900c1f.
    All system tests passed.
    FWHM on 8us shaping time and same pulser settings.

     Ch   | nnaida11 | nnaida12 | nnaida13 | nnaida14
    1.4.L |   37     |    40    |   42     |   35
    1.6.L |   31     |    28    |   29     |   23
    1.8.L |   22     |    18    |   15     |   15
   1.10.L |   23     |    20    |   16     |   15

(2) Swapped nnaida11/12: nnaida11 -> 2a:b8:90     nnaida12 -> 2a:b6:45
    Updated firmware from 0x10300c12 to 0x1900c1f.
    All system checks passed.
    No ASIC temp in nnaida11.
    FWHM on 8us shaping time and same pulser settings.

     Ch   | nnaida11 | nnaida12 | nnaida13 | nnaida14
    1.4.L |   40     |    32    |   40     |   34
    1.6.L |   29     |    25    |   29     |   23
    1.8.L |   21     |    18    |   17     |   16
   1.10.L |   21     |    18    |   17     |   16

(3) Swapped nnaida11/12: nnaida11 -> 2a:ed:9a     nnaida12 -> 2b:11:c5
    Updated firmware from 0x10300c12 to 0x1900c1f.
    All system checks passed.
    No ASIC temp in nnaida12.
    FWHM on 8us shaping time and same pulser settings.

     Ch   | nnaida11 | nnaida12 | nnaida13 | nnaida14
    1.4.L |   44     |    36    |   40     |   35
    1.6.L |   30     |    27    |   29     |   24
    1.8.L |   22     |    18    |   16     |   17
   1.10.L |   23     |    18    |   17     |   16


The above were all the repaired modules and seem to be operating normally.
Following are the 2 modules for which no fault report was provided. I only had time to complete testing on one, the other remains unknown.

(4) Swapped nnaida11/12: nnaida11 -> 2a:ed:8f     nnaida12 -> 2b:09:da
    Updated firmware from 0x10300c12 to 0x1900c1f.
    nnaida11 failed clock status tests. Tried 'Perform resync' from Master Timestamp window with no effect.
    No SYNC errors reported. All other system tests passed.
    nnaida12 missing lots of channels but all system checks passed.
    FWHM on 8us shaping time and same pulser settings.

     Ch   | nnaida11 | nnaida12 | nnaida13 | nnaida14
    1.4.L |   46     |    46    |   41     |   36
    1.6.L |   31     |    26    |   28     |   24
    1.8.L |   22     |    19    |   17     |   16
   1.10.L |   22     |    20    |   17     |   16


**

Overall, the first three modules which have been repaired seem to be operating normally. The fourth seems not be and the last module remains unknown.
Ch 1.4.L displays greater than expected FWHM throughout in all nnaida11/12, but FWHM were largely constant (to within a few channels) throughout and all FWHM fell in the range ~15-40ch apart from 1.1.L in *all* nnaida.

09.30 DAQ found stopped, no merger error messages
      Most recent file R63_291, last accessed 06.46

      R63_291 ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R63_291
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      29203
          ADC data format:  237170622 ( 2006571.1 Hz)
        Other data format:    1096655 (    9278.2 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        113 (       1.0 Hz)
                               RESUME:        113 (       1.0 Hz)
                              SYNC100:    1077835 (    9119.0 Hz)
                           FEE64 disc:      15061 (     127.4 Hz)
                             MBS info:       3533 (      29.9 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        175 (       1.5 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      118.197 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.000 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       2.763 s
 FEE module #:   6 elapsed dead time       0.275 s
 FEE module #:   7 elapsed dead time       0.004 s
 FEE module #:   8 elapsed dead time       0.003 s
 FEE module #:   9 elapsed dead time       0.001 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.013 s
 FEE module #:  15 elapsed dead time       0.028 s
 FEE module #:  16 elapsed dead time       0.275 s
 FEE module #:  17 elapsed dead time       6.010 s
 FEE module #:  18 elapsed dead time       0.382 s
 FEE module #:  19 elapsed dead time       0.555 s
 FEE module #:  20 elapsed dead time       0.378 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.035 s
 FEE module #:  23 elapsed dead time       0.168 s
 FEE module #:  24 elapsed dead time       0.043 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   28.188s ( 1036.027 blocks/s,  64.752 Mb/s)


      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      System-wide checks - SYNC errors & SYNC pulses fail - other checks OK - see attachments 4-7
      AIDA SYNC stats - see attachment 8

      Restart merger OK
      DAQ STOP OK

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

09.43 DAQ starts (R64)

18.25 DAQ stop OK
      Stop before 'scheduled' 18.30 DAQ stall

      System wide checks - SYNC count & SYNC errors fail - other checks OK - see attachments 8-11

18.49 DAQ start (R65)

      N.B. normal DAQ start - no DAQ RESET, SETUP, restart of merger & tapeserver etc

18.53 SYNC error counter baseline

19.21 DAQ found stalled
      Most recent files R65_12 last access 19.17

      Soft reset failed - nnaida4 connect timeouts - power cycle FEE64s 

20.02 DAQQ start (R66)

09.13 DAQ found stopped, no merger error messages
      Most recent file R55_10, last accessed 19.17
      Restart merger OK
      DAQ STOP OK

aidas1> ./analyser2 /TapeData/Sept2016/R55_10
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      23037
          ADC data format:  187091367 ( 2006959.5 Hz)
        Other data format:     867516 (    9306.0 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         62 (       0.7 Hz)
                               RESUME:         62 (       0.7 Hz)
                              SYNC100:     851796 (    9137.4 Hz)
                           FEE64 disc:      12836 (     137.7 Hz)
                             MBS info:       2760 (      29.6 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        124 (       1.3 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:       93.221 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.000 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.922 s
 FEE module #:   6 elapsed dead time       1.113 s
 FEE module #:   7 elapsed dead time       0.017 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.001 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.005 s
 FEE module #:  15 elapsed dead time       0.016 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.446 s
 FEE module #:  18 elapsed dead time       0.435 s
 FEE module #:  19 elapsed dead time       0.925 s
 FEE module #:  20 elapsed dead time       0.015 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.000 s
 FEE module #:  23 elapsed dead time       0.221 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   22.266s ( 1034.644 blocks/s,  64.665 Mb/s)

      R55_10 ADC data synchronised

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      SYNC statistics, System Wide Checks SYNC error & SYNC pulses fail - see attachments 4-8

      DAQ RESET & SETUP
      System-wide checks
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

      #1 DAQ start (R58)
      nnaida7 data transfer #1 tag (X) drops at DAQ GO
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1  

      #2 DAQ start (R59)
      nnaida15 data transfer #1 tag (X) drops at DAQ GO
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1  

09.35 DAQ start (R60)

16.28 DAQ stop OK
      Final file R60_169

16.30 DAQ start (R61)
      BNC PB-4 pulser OFF

      Background run - files R61_0 - R61_31

      + 60Co (ID# 0115) - files R61_33 - R61_49 

      60Co source placed on top of AIDA snout ~ above DSSSD #3

      DAQ stalled at 18.28 (during R61_49) - as expected! See https://elog.ph.ed.ac.uk/AIDA/393

      DAQ RESET & SETUP
      System-wide checks
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

20.05 DAQ start (R63)
      BNC PB-4 pulser ON, 60Co source removed

From the installation of the RG58 cable for the 50MHz TTL clock from BRIKEN DAQ
to AIDA Master MACB external clock input we observe DAQ stalls at c. 06.30 and
18.30 daily. This coincides with the nominal start times of the ORNL Clover detector
LN2 fill cycles.

run          start stop  files   recovery

AIDA Master MACB internal clock

R1   28.9.16 15.02 11.20 R1_304  OK

RG174 cable from BRIKEN DAQ 50MHz clock (TTL) to AIDA Master MACB external clock input

     9.10.16 16.55 17.30         no data transfer, TS_SYNC phase = 0, OK
     9.10.16 17.40 19.15 est     no data transfer, TS_SYNC phase = 0, ReSYNC
     9.10.16 22.20 01.40         no data transfer, TS_SYNC phase = 1, ?

    10.10.16 14.20 16.50         no data transfer, TS_SYNC phase = 2, ?
    10.10.16 18.35 18.40/19.40   no data transfer, TS_SYNC phase = 3, some FEE64s stopped later than others, ReSYNC
    10.10.16 20.36 06.35         no data transfer, TS_SYNC phase = 0, power cycle


RG174 cable from BRIKEN DAQ 50MHz clock (TTL) to AIDA Master MACB external clock input
replaced by RG58 cable

run          start stop  files   recovery

R17 11.10.16 15.46 08.22 R17_440 soft reset

R21 12.10.16 14.05 15.30         power dip - power cycle
R22 12.10.16 16.20 19.05         OK 

R24 13.10.16                     OK
R25 13.10.16                     OK
R26 13.10.16                     OK
R27 13.10.16                     OK
R28 13.10.16                     OK
R29 13.10.16                     OK

R32 13.10.16 21.20 22.34 R32_26  soft reset
R33 14.10.16 00.01 00.25 ?       power cycle

R40 14.10.16 01.49 06.26 R40_91  soft reset 
R41 14.10.16                     OK
R42 15.10.16 22.45 07.18 R42_164 System-wide tests - SYNC errors fail *but* SYNC pulses OK - ReSYNC only 
R43 15.10.16 11.39 12.43         disk housekeeping caused merger/tapeserver problem

R46 15.10.16 12.43 18.26 R46_109 soft reset
R47 16.10.16 11.12 18.26 R47_120 power cycle

R49 16.10.16 21.05 06.26 R49_226 soft reset

R51 17.10.16 12.21 18.30 R51_145 soft reset
R52 17.10.16 20.41 06.30 R52_211 soft reset
R53 18.10.16 10.02 18.30 R53_193 soft reset

R55 18.10.16 18.52 19.17 R55_10  soft reset

R60 19.10.16 09.35 16.28 R60_169 OK
R61 19.10.16 16.30 18.26 R61_69  power cycle

R63 19.10.16 20.05 06.46 R63_291 soft reset
R64 20.10.16 09.45 18.25 R64_240 OK - System-wide tests - SYNC errors fail & SYNC pulses fail - other checks OK
R65 20.10.16 18.49 19.17 R65_12  power cycle            
R66 20.10.16 20.02 10.55 R66_396 soft reset  auto LN2 fill may have failed, manually selected c. 11.00
R67 21.10.16 14.02 18.26 R67_121 soft reset
R68 21.10.16 18.40 18.44 R68_1   soft reset

R70 21.10.16 18.53 06.46 R70_315 soft reset
R71 22.10.16 10.42 18.25         OK

R73 22.10.16 19.07 19.17 R73_4   soft reset
R74 22.10.16 19.38 06.31 R74_296 soft reset

R76 23.10.16 10.46 11.52 R76_29  merger crashed, soft reset
R77 23.10.16 18.50 19.17         disk housekeeping caused merger/tapeserver problem
R78 23.10.16 19.47 06.46 R78_291 soft reset
R79 24.10.16 11.07 18.46 R79_182 soft reset
R80 24.10.16 18.56 19.17 R80_5   DAQ stall, soft reset
R81 24.10.16 19.29 06.26 R81_169 soft reset
R82 25.10.16 10.22 18.30 R82_125 -> safe state

R83 27.10.16 14.35 18.30 R83_125 soft reset
R86 27.10.16 20.48 06.26 R86_245 soft reset
R87 28.10.16 14.34 18.47 R87_274 soft reset

R89 29.10.16 19.10 07.17 R89_102 power cycle

soft reset => no FEE64 power cycle
      Restart merger
      DAQ STOP
      System wide checks 
      DAQ RESET & SETUP
      System-wide checks
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

09/42 DAQ found stopped, no merger error messages
      Most recent file R52_211, last accessed 06.30
      Restart merger OK
      DAQ STOP OK

aidas1> ./analyser2 /TapeData/Sept2016/R52_211
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:       7619
          ADC data format:   61809254 ( 1624588.3 Hz)
        Other data format:     354167 (    9308.9 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         28 (       0.7 Hz)
                               RESUME:         28 (       0.7 Hz)
                              SYNC100:     347607 (    9136.5 Hz)
                           FEE64 disc:       5364 (     141.0 Hz)
                             MBS info:       1140 (      30.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:         88 (       2.3 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:       38.046 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.011 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.058 s
 FEE module #:   6 elapsed dead time       0.165 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.000 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.002 s
 FEE module #:  15 elapsed dead time       0.055 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.057 s
 FEE module #:  18 elapsed dead time       0.089 s
 FEE module #:  19 elapsed dead time       1.021 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.000 s
 FEE module #:  23 elapsed dead time       0.085 s
 FEE module #:  24 elapsed dead time       0.004 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    1.793s ( 4249.377 blocks/s, 265.586 Mb/s)

      R51_211 ADC data synchronised

      DSSSD bias & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      System-wide checks - see attachments 4 & 5 
      SYNC errors and SYNC pulses fail, all other tests OK

      Statistics - see attachments 6-16

      DAQ RESET & SETUP OK
      ReSYNC OK
      System-wide checks OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

10.02 DAQ start (R53)

18.20 DAQ OK

      System-wide checks *all* OK

      Statistics - see attachments 17-27

18.30 DAQ stalled on schedule 
      Most recent file R53_193 last accessed 18.30
      AIDA SYNC rates zero in large fraction of FEE64s - see attachment 28
      SYNC errors and SYNC pulses fail - see attachments 29-32

      DAQ STOP
      DAQ RESET
      Restart merger
      DAQ RESET OK
      DAQ SETUP OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

      System-wide checks *all* OK

18.45 DAQ starts (R54)
      merging stops shortly after start of run - see attachment 33
 
      DAQ HALT, RESET, SETUP OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

18.52 DAQ starts (R55)

12.05 DAQ found stopped
      Most recent file R49_226, last accessed 06.26
      Restart merger OK
      DAQ STOP OK

      System-wide checks - see attachments 1-2 
      SYNC errors and SYNC pulses fail

      ReSYNC OK
      System-wide checks OK
      Restart merger & tapeserver

      DSSSD bias & leakage currents OK - see attachments 3 & 4
      FEE64 temperatures OK - see attachment 5

      DAQ start
      #1 nnaida15 data transfer #1 tag drops at DAQ GO
         disable H & data transfer #1
         restart merger & tapeserver
         enable H & data transfer #1

12.22 #2 DAQ start (R51) OK

20.33 DAQ found stopped
      Most recent file R51_145, last accessed 18.30
      Restart merger OK
      DAQ STOP OK

      System-wide checks - see attachments 6 & 7
      SYNC errors and SYNC pulses fail

      DAQ RESET & SETUP OK
      Disable H & data transfer #1
      Restart merger & tapeserver
      Enable H & data transfer #1

20.41 DAQ GO (R52)

11.12 DAQ start (R47)

      Detector bias and leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      Statistics - see attachments 4-14

11.56 Temperature +25.0 deg C, d.p. +8.4 deg C, RH 34.5%

20.33 DAQ found stopped
      Most recent file R47_120 (last access 18.26)

      R47_120 ADC data synchronised

      Restart merger and request DAQ STOP - DAQ stops OK

      System-wide tests SYNC errors and SYNC pulses - see attachments 15 & 16 - all other tests OK

      DAQ RESET & SETUP OK

      Normal restart which failed shortly after enabling ASIC readout - restarting merger did not
      recover DAQ control - power cycle required

21.05 DAQ starts (R49)
      

11.27 DAQ found stopped
      Most recent file R42_164, last accessed 07.18
      Restart merger OK
      DAQ STOP OK

      System-wide checks - see attachments 1-5
      ASIC clock timestamp, SYNC errors fail *but* SYNC pulses OK

      ReSYNC OK
      System-wide checks OK

      DSSSD bias & leakage currents OK - see attachments 6 & 7
      FEE64 temperatures OK - see attachment 8

      R42_164 ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R42_164
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:       2444
          ADC data format:   19809141 ( 1404089.4 Hz)
        Other data format:     131455 (    9317.6 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:          7 (       0.5 Hz)
                               RESUME:          7 (       0.5 Hz)
                              SYNC100:     129011 (    9144.4 Hz)
                           FEE64 disc:       2010 (     142.5 Hz)
                             MBS info:        420 (      29.8 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:         21 (       1.5 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:       14.108 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.000 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.334 s
 FEE module #:   6 elapsed dead time       0.042 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.000 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.000 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.000 s
 FEE module #:  18 elapsed dead time       0.005 s
 FEE module #:  19 elapsed dead time       0.000 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.000 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    0.586s ( 4171.093 blocks/s, 260.693 Mb/s)

11.39 DAQ starts (R43)

12.07 Disk housekeeping caused TapeServer problem
      DAQ stopped OK after some minutes and restarting merger

12.43 DAQ starts (R46)

18.26 DAQ stalled
      Latest file R46_109 (most recent access 18.26)
      Merger error messages - see attachment 9
      Restart merger - error messages - see attachment 10
   
      Analysis of R46_109

      ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R46_109
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:       4688
          ADC data format:   37985730 ( 1342216.8 Hz)
        Other data format:     263662 (    9316.4 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         25 (       0.9 Hz)
                               RESUME:         25 (       0.9 Hz)
                              SYNC100:     258788 (    9144.2 Hz)
                           FEE64 disc:       3981 (     140.7 Hz)
                             MBS info:        843 (      29.8 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:         41 (       1.4 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:       28.301 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.013 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.298 s
 FEE module #:   6 elapsed dead time       0.200 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.001 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.003 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.086 s
 FEE module #:  18 elapsed dead time       0.054 s
 FEE module #:  19 elapsed dead time       0.097 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.001 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    2.102s ( 2230.721 blocks/s, 139.420 Mb/s)


11.00 Sunday 16 October 
      DAQ STOP requested - nnaida1-24 all stop *except* nnaida6 which remains going - Run Control displays RESET
only
      DAQ RESET
      System-wide checks all OK
      Normal setup and DAQ restart (see https://elog.ph.ed.ac.uk/AIDA/388 )
      DAQ SETUP
      

DAQ continues (R33)

aidas1> ./analyser2 /TapeData/Sept2016/R33_0
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  258854184 ( 1075951.6 Hz)
        Other data format:    2233816 (    9285.1 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         95 (       0.4 Hz)
                               RESUME:         95 (       0.4 Hz)
                              SYNC100:    2200965 (    9148.5 Hz)
                           FEE64 disc:      26965 (     112.1 Hz)
                             MBS info:       5696 (      23.7 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        273 (       1.1 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      240.582 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.026 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.278 s
 FEE module #:   6 elapsed dead time       1.219 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.000 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.001 s
 FEE module #:  15 elapsed dead time       0.014 s
 FEE module #:  16 elapsed dead time       0.015 s
 FEE module #:  17 elapsed dead time       0.703 s
 FEE module #:  18 elapsed dead time       0.196 s
 FEE module #:  19 elapsed dead time       1.037 s
 FEE module #:  20 elapsed dead time       0.063 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.006 s
 FEE module #:  23 elapsed dead time       0.073 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   22.278s ( 1436.394 blocks/s,  89.775 Mb/s)

00.16 DSSSD bias and leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3
      Temperature +25.0 deg C, d.p. +8.2 deg C, RH 33.8%

00.25 DAQ stopped
      Unable to restart merger - see attachment 4 - DAQ STOP OK
      System wide tests fail - see attachments 5 & 6
      DAQ RESET & SETUP, ReSYNC OK
      System wide checks fail - as above

      Several FEE64 power cycles and eventually an aidas1 reboot due to
      1) timeouts from random FEE64s following power cycle + 10 mins
      2) data transfer links (X) dropping at DAQ GO 

01.49 DAQ starts (R40)

08.31 DAQ found stopped
      Most recently accessed file R40_91 @ 06.26

      Restart merger & request DAQ STOP
      Transient timeout from nnaida8 but STOP completed OK

11.10 DSSSD bias and leakage currents OK - see attachments 7 & 8
      FEE64 temperatures OK - see attachment 9

      System-wide checks - system clock, SYNC errors and SUNC count fail - see attachments 10-13

      ReSYNC fails - see attachment 14
      
11.30 Analysis of R40 data

      R40_91 ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R40_91
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      30880
          ADC data format:  249997809 ( 1194334.5 Hz)
        Other data format:    1952111 (    9326.0 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         55 (       0.3 Hz)
                               RESUME:         55 (       0.3 Hz)
                              SYNC100:    1915685 (    9152.0 Hz)
                           FEE64 disc:      30044 (     143.5 Hz)
                             MBS info:       6272 (      30.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        303 (       1.4 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      209.320 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.000 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.167 s
 FEE module #:   6 elapsed dead time       0.529 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.000 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.002 s
 FEE module #:  15 elapsed dead time       0.018 s
 FEE module #:  16 elapsed dead time       0.043 s
 FEE module #:  17 elapsed dead time       0.098 s
 FEE module #:  18 elapsed dead time       0.035 s
 FEE module #:  19 elapsed dead time       0.378 s
 FEE module #:  20 elapsed dead time       0.010 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.000 s
 FEE module #:  23 elapsed dead time       0.046 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    6.613s ( 4669.392 blocks/s, 291.837 Mb/s)


21.52 DAQ starts (Sept2016/R41)  BRIKEN filename 252CfwithAida75mm

      Correlation scaler reset requested by BRIKEN DAQ following start of run to disk

      End of AIDA snout positioned at edge of (CH2)n moderator aperture for
      ORNL HPGe clover detectors

      RIKEN 252Cf source ~25k neutrons/s

      FEE64 temperatures OK
      *All* system-wide checks OK

      B2F/F11 temperature + deg C, d.p. + deg C,RH %

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a
      LEC/MEC fast comparators # 1, 55 & 58 disabled for all FEE64s

      Master MACB serial #13 (see https://elog.ph.ed.ac.uk/AIDA/367)
      Master MACB mode 5
      TS_SYNC_PHASE 0

22.17 DAQ stops OK
      BRIKEN DAQ stopped at about same time

22.45 DAQ starts (R42)

      AIDA withdrawn from (CH2)n moderator, 252Cf source removed

11.40 Power cycle AIDA FEE64s
      Set TS_SYNC_PHASE 0

      DSSSD bias/leakage current OK - see attachment 1-2
      FEE64 temperatures OK - see attachment 3
      *All* system-wide checks OK

      B2F/F11 temperature + deg C, d.p. + deg C,RH %

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a
      LEC/MEC fast comparators # 1, 55 & 58 disabled for all FEE64s

      Master MACB serial #13 (see https://elog.ph.ed.ac.uk/AIDA/367)
      Master MACB mode 5

12.15 DAQ starts (file Sept2016/R24)

15.16 DAQ stops OK

15.18 DAQ starts (R25)
 
      Pulser walkthrough 

      BNC PB-4 amplitudes 10,000 - 90,000 @ 10,000 step

      See attachment 4

      Spectra saved 13.10.16 15.32 (08.32 FEE64s)

15.30 DAQ stops OK

15.38 DAQ starts (R26)
 
      Pulser walkthrough 

      BNC PB-4 amplitudes 8,000 - 2,000 @ 2,000 step

      See attachment 5

      Spectra saved 13.10.16 15.47 (08.47 FEE64s)

15.45 DAQ stops

15.50 DAQ starts (R27)
      LEC/MEC FSR 20MeV -> 1GeV 

      BNC PB-4 amplitude 90,000

      Spectra saved 13.10.16 16.07 (09.05 FEE64s)

16.05 DAQ stops

16.12 DAQ starts (R28)
      LEC/MEC FSR 1GeV -> 20MeV

      BNC PB-4 off (noise + background activity only)

      Spectra saved 13.10.16 16:49 (saved 09.49 FEE64s)

16.48 DAQ stops

16.57 DAQ starts (R29)

      BNC PB-4 90,000 amplitude ~23Hz freq.

17.26 Lost SYNC pulses. Merger+TapeServer stopped writing to file (noticed 18.20)

18.25 R29 closed.

19:20 NIM bin supplying TTL clock to master MACB failed at or around the same time as the DAQ stop occurred.
      
      Need to replace NIM bin before clock can be supplied.


21.20 DAQ starts (R32)

23.51 DAQ found stopped, most recent file R32_26 (last access 22.34 13.10.16)

23.56 Restarted merger & immediately requested DAQ STOP - OK
      DAQ reset & setup
      System-wide tests all OK

00.01 DAQ starts (R33)

10.50 Merger & TapeServer found stopped
      connect errors - see attachment 1

      DSSSD bias and leakage currents OK - see attachments 2 & 3

      Most recent data file R17_440 last accessed 08.22 12.10.16

      R17_440 ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R17_440
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      30546
          ADC data format:  147630891 ( 1189229.1 Hz)
        Other data format:  101593923 (  818381.9 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        101 (       0.8 Hz)
                               RESUME:        101 (       0.8 Hz)
                              SYNC100:    1133804 (    9133.3 Hz)
                           FEE64 disc:  100456290 (  809217.8 Hz)
                             MBS info:       3627 (      29.2 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        151 (       1.2 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      124.140 s
 FEE module #:   1 elapsed dead time       0.728 s
 FEE module #:   2 elapsed dead time       0.184 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       1.034 s
 FEE module #:   6 elapsed dead time       3.462 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.064 s
 FEE module #:  10 elapsed dead time       0.003 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.062 s
 FEE module #:  15 elapsed dead time       0.018 s
 FEE module #:  16 elapsed dead time       0.005 s
 FEE module #:  17 elapsed dead time       0.817 s
 FEE module #:  18 elapsed dead time       0.035 s
 FEE module #:  19 elapsed dead time       0.048 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.103 s
 FEE module #:  23 elapsed dead time       0.216 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   14.129s ( 2161.951 blocks/s, 135.122 Mb/s)

Conclude DAQ ran without problem for c. 16.5h which is a significant improvement
assuming that it can be consistently reproduced.

11.20 Merger restart did not clear connect/timeout issues 

      Re-route BNC - BNC RG58 cable with 50MHz clock from BRIKEN to
      AIDA Master MACB external clock input (rear panel) so that it will
      not be stepped upon. 

      Power cycle AIDA FEE64s

      N.B. I selected 'Switch ALL On' rather than 'Sequence ALL On' by mistake and one
      of the USB ac mains controller output 250VAC/16A fuses blew - use 'Sequence ALL On'

      TS_SYNC_PHASE 0

      FEE64 temperatures OK
      *All* system-wide checks OK

      B2F/F11 temperature +24.6 deg C, d.p. +8.9 deg C,RH 36.6%

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a
      LEC/MEC fast comparators # 1, 55 & 58 disabled for all FEE64s

      Master MACB serial #13 (see https://elog.ph.ed.ac.uk/AIDA/367)
      Master MACB mode 5

14.05 DAQ starts (file Sept2016/R21)

15.30 Sequence of three electrical power dips over 30 minute period. RIKEN public address
      system reports that TEPCO (Tokyo Electric Power Company) - the site supplier - is
      having region-wide problems.

      The third power dip stopped DAQ.

      Unable to recover by restarting merger

      Power cycle FEE64s

16.20 DAQ restarts (file Sept2016/R22)

19.05 DAQ stops
      
      Because of risk of power outages due to TEPCO distribution problems we have powered
      down AIDA and Julabo FL1006 chiller and disconnected from ac mains.

10.40 DAQ found stopped

      All FEE64 AIDA SYNC rates zero, AIDA SYNC count ~ 13.8M => DAQ stopped @ 06.35

      System wide checks - see attachments 1-4 - all other system-wide checks OK

11.15 Replace cable for Master MACB external clock signal
           - change from c. 4m RG174 (Lemo-00 to Lemo-00) to c. 4m RG58 (BNC to BNC)
      Power cycle AIDA FEE64s
      Set TS_SYNC_PHASE 0

      DSSSD bias/leakage current OK - see attacment 5-6
      FEE64 temperatures OK - see attachment 7
      *All* system-wide checks OK (N.B. several ReSYNCs required) 

      B2F/F11 temperature + deg C, d.p. + deg C,RH %

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a

      Master MACB serial #13 (see https://elog.ph.ed.ac.uk/AIDA/367)
      Master MACB mode 5

11.58 DAQ starts

15.41 DAQ OK

15.44 DAQ stop requested

15.46 DAQ start
      Data transfer to disk enabled to test DAQ correlation real-time monitor

22.50 AIDA SYNCs OK
      # Master SYNCs *not equal* to # FEE64 SYNCs - all FEE64 SYNCs # equal
            - all other system-wide checks OK - see attachments 8-15
      Merger and TapeServer OK

     R17_197 ADC data synchonised

aidas1> ./analyser2 /TapeData/Sept2016/R17_197
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  165074646 ( 1182230.4 Hz)
        Other data format:   96013354 (  687627.8 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        113 (       0.8 Hz)
                               RESUME:        113 (       0.8 Hz)
                              SYNC100:    1275326 (    9133.6 Hz)
                           FEE64 disc:   94733738 (  678463.4 Hz)
                             MBS info:       4064 (      29.1 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        191 (       1.4 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      139.630 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.206 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       1.084 s
 FEE module #:   6 elapsed dead time       4.015 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.201 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.003 s
 FEE module #:  14 elapsed dead time       0.193 s
 FEE module #:  15 elapsed dead time       0.024 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       1.198 s
 FEE module #:  18 elapsed dead time       0.040 s
 FEE module #:  19 elapsed dead time       0.124 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.187 s
 FEE module #:  23 elapsed dead time       0.258 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   19.555s ( 1636.436 blocks/s, 102.277 Mb/s)

10.30 DAQ found stopped

      All FEE64 AIDA SYNC rates zero, AIDA SYNC count ~ 4.4M => DAQ stopped @ 01.40

      3He detector DAQ off - no 50MHz clock to Master MACB

      System wide checks - see attachments 26-18

      N.B. It would appear that the DAQ stalled (TS_SYNC_PHASE 1) c. 01.40 and at some
      later time (c. 06.00) the 3He detector DAQ was powered off which means that AIDA
      lost the external 50MHz clock to the Master MACB - system-wide screenshots should
      be interpreted with caution.

14.15 3He detector DAQ 50MHz clock restarted
 
      VME and NIM crates ON
      Excecute command ConfClock_50MHz on 3He detector DAQ computer

      Power cycle AIDA FEE64s
      Set TS_SYNC_PHASE 2

      DSSSD bias/leakage current OK
      FEE64 temperatures OK
      *All* system-wide checks OK

      B2F/F11 temperature + deg C, d.p. + deg C,RH %

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a

      Master MACB serial #13 (see https://elog.ph.ed.ac.uk/AIDA/367)
      Master MACB mode 5

14.20 DAQ starts (no data transfer)

18.10 DAQ found stopped

      All FEE64 AIDA SYNC rates zero, AIDA SYNC count ~ 3.4M => DAQ stopped @ 16.50

      System-wide checks - see attachments 16-9

      Power cycle AIDA FEE64s
      Set TS_SYNC_PHASE 3

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a

20.10 DAQ found stalled

      System-wide checks - see attachments 8-1

      Power cycle AIDA FEE64s
      Set TS_SYNC_PHASE 0

      ASIC settings 2016Sep02-18.17.01
      slow comparator 0x10 -> 0x0a

20.35 DAQ starts (no data transfer)

      slow comparator 0x10 -> 0x0a

18.35 DAQ starts (no data transfer)

20.16 DAQ found stopped
      All FEE64 AIDA SYNC rates zero, AIDA SYNC count ~ 120k (17/24 FEE64s) or 1.49M (7/24) => FEE64s stopped @ 18.40 & 19.40

20.36 DAQ starts (no data transfer)

23.47 DAQ OK

12.30 Following scheduled power outages of October 8

      power up AIDA and Julabo FL11006 recirculating chiller

      Julabo FL11006 set point +20 deg C
      Temperature +25.3 deg C, d.p. +10.6 deg C, RH 39.3%
     
      boot aidas1 
      aidas1 filesystem checks (fsck) run from c. 12.30 to 15.58

      System wide checks OK *except* nnaida21 failed ADC calibration

16.55 DAQ starts (no data transfer)

      ASIC settings 2016Sep02-18.17.01
      slow comparator threshold 0x10 -> 0x0a
      TS_SYNC_PHASE 0

      DSSSD bias & leakage current OK - see attachments 8 & 9
      FEE64 temperatures OK - see attachment 7

17.30 DAQ stops

      DSSSD bias off
      AIDA withdrawn from (CH2)n moderator 
      DSSSD bias on

17.40 DAQ starts

19.15 Noticed DAQ stopped producing SYNC pulses at some point.
      A reload of the run control tab sees them all as going still, but only 20% are reporting any SYNC output in the stats page.
      All FEEs have failed the SYNC errors since baseline check and the values reported by the SYNC pulses received tests vary
      by +- 3 of a central value.
      See attachments 1-6.
      The merger and tape server were not set up before this run and are not currently running.

      TS_SYNC phase changed from 0 -> 1 and ReSYNC

22.20 DAQ OK

      AIDA SYNCs OK
      All system-wide checks OK *except* nnaida21 fails ADC calibration (no change)

Analysis of R13_47 - the data file that was being written when DAQ stalled
yesterday evening - see https://elog.ph.ed.ac.uk/AIDA/371

aidas1> ./analyser2 /TapeData/Sept2016/R13_46
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  145759250 (  544585.9 Hz)
        Other data format:  115328750 (  430891.4 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         74 (       0.3 Hz)
                               RESUME:         74 (       0.3 Hz)
                              SYNC100:    2449126 (    9150.4 Hz)
                           FEE64 disc:  112871466 (  421710.5 Hz)
                             MBS info:       8010 (      29.9 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        382 (       1.4 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      267.652 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.824 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.275 s
 FEE module #:   6 elapsed dead time       0.488 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.017 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.023 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.012 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.912 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.000 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   17.016s ( 1880.624 blocks/s, 117.539 Mb/s)
aidas1> ./analyser2 /TapeData/Sept2016/R13_47
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      11864
          ADC data format:   54019518 (  544839.2 Hz)
        Other data format:   42776197 (  431439.3 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         29 (       0.3 Hz)
                               RESUME:         29 (       0.3 Hz)
                              SYNC100:     907301 (    9151.0 Hz)
                           FEE64 disc:   41865866 (  422257.8 Hz)
                             MBS info:       2972 (      30.0 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        135 (       1.4 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:       99.148 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.179 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.199 s
 FEE module #:   6 elapsed dead time       0.100 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.005 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.003 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.021 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.311 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.000 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    6.238s ( 1901.806 blocks/s, 118.863 Mb/s)

Final SYNCs of R13_47 

aidas1. ./analyser2 v /TapeData/Sept2016/R13_47 | grep SYNC
 :
 :
 ***   SYNC100 timestamp: block: 11864 ptr:  2151 data: 0x81401340 module:  1 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2153 data: 0x82401340 module:  2 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2155 data: 0x83401340 module:  3 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2157 data: 0x84401340 module:  4 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2159 data: 0x85401340 module:  5 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2161 data: 0x86401340 module:  6 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2163 data: 0x87401340 module:  7 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2165 data: 0x88401340 module:  8 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2167 data: 0x89401340 module:  9 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2169 data: 0x8A401340 module: 10 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2171 data: 0x8B401340 module: 11 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2173 data: 0x8C401340 module: 12 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2175 data: 0x8D401340 module: 13 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2177 data: 0x8E401340 module: 14 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2179 data: 0x8F401340 module: 15 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2181 data: 0x90401340 module: 16 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2183 data: 0x91401340 module: 17 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2185 data: 0x92401340 module: 18 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2187 data: 0x93401340 module: 19 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2189 data: 0x94401340 module: 20 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2191 data: 0x95401340 module: 21 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2193 data: 0x96401340 module: 22 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2195 data: 0x97401340 module: 23 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  2197 data: 0x98401340 module: 24 information type:  4 information
field: 0x00001340 ts: 0x000001340B4800A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6807 data: 0x81401340 module:  1 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6809 data: 0x82401340 module:  2 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6811 data: 0x83401340 module:  3 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6813 data: 0x84401340 module:  4 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6815 data: 0x85401340 module:  5 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6817 data: 0x86401340 module:  6 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6819 data: 0x87401340 module:  7 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6821 data: 0x88401340 module:  8 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6823 data: 0x89401340 module:  9 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6825 data: 0x8A401340 module: 10 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6827 data: 0x8B401340 module: 11 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6829 data: 0x8C401340 module: 12 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6831 data: 0x8D401340 module: 13 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6833 data: 0x8E401340 module: 14 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6835 data: 0x8F401340 module: 15 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6837 data: 0x90401340 module: 16 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6839 data: 0x91401340 module: 17 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6841 data: 0x92401340 module: 18 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6843 data: 0x93401340 module: 19 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6845 data: 0x94401340 module: 20 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6847 data: 0x95401340 module: 21 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6849 data: 0x96401340 module: 22 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6851 data: 0x97401340 module: 23 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0
 ***   SYNC100 timestamp: block: 11864 ptr:  6853 data: 0x98401340 module: 24 information type:  4 information
field: 0x00001340 ts: 0x000001340B4C00A0

Analysis of the end of file R13_47 - see attachment 1

Offline analysis of R13_3 and R13_47 shows AIDA ADC data synchronised

10.29 DAQ left running overnight
      Histograms only - no data transfer to Merger & TapeServer

      DSSSD biases & leakage currents OK - see attachments 1 & 2
      FEE64 temperatures OK - see attachment 3

      DAQ run control OK - see attachment 4

      Statistics - see attachments 5-16
      
      N.B. some FEE64s are producing SYNCs, some not, in particular nnaida6 is not

      System-wide tests - see attachments 17-22

11.31 DAQ recovered with STOP-GO (no data transfer)
      AIDA SYNCs OK for all FEE64s

22.46 DAQ still running OK

      Power down in preparation for tomorrow's planned site-wide power outage 

DSSSD bias voltages and leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3

Install MACB serial #13 (firmware 16.4.15) as Master MACB, mode 5

System-wide checks all OK 
 N.B. nnaida19 ASIC clock OK (cf previous Elog entries) - see attachment 4

Setup AIDA-BELEN DAQ correlation - RIBF still to do - see attachments 5 & 6
  reset request and trigger signals to Master MACB - NIM, width ~200ns

BELEN clock (10Hz) triggers BELEN BNC PB-5 and AIDA Master MACB

 ***     MBS information: block:  9349 ptr:  3725 data: 0x86807FF5 module:  6 information type:  8 information index:  0 MBS data:7FF5 ts: 0x00000026D0FE47A2
 ***     MBS information: block:  9349 ptr:  3727 data: 0x8681AF75 module:  6 information type:  8 information index:  1 MBS data:AF75 ts: 0x00000026D0FE47A2
 ***     MBS information: block:  9349 ptr:  3729 data: 0x86820000 module:  6 information type:  8 information index:  2 MBS data:0000 ts: 0x00000026D0FE47A2
 ***     MBS information: block:  9362 ptr:  7641 data: 0x8680A5AD module:  6 information type:  8 information index:  0 MBS data:A5AD ts: 0x00000026D196DE82
 ***     MBS information: block:  9362 ptr:  7643 data: 0x8681AF9B module:  6 information type:  8 information index:  1 MBS data:AF9B ts: 0x00000026D196DE82
 ***     MBS information: block:  9362 ptr:  7645 data: 0x86820000 module:  6 information type:  8 information index:  2 MBS data:0000 ts: 0x00000026D196DE82

0x0000AF9BA5AD - 0x0000AF757FF5 = 0x2625B8 = 2500024 * 40ns = 100000960ns = 0.1s

0x26D196DE82 - 0x26D0FE47A2 = 0x9896E0 = 10000096 * 10ns = 100000960ns = 0.1s

BELEN DAQ manual reset -> Master MACB reset request

 ***     MBS information: block:  9375 ptr:  3043 data: 0x86808A8A module:  6 information type:  8 information index:  0 MBS data:8A8A ts: 0x00000026D22F755E
 ***     MBS information: block:  9375 ptr:  3045 data: 0x8681001F module:  6 information type:  8 information index:  1 MBS data:001F ts: 0x00000026D22F755E
 ***     MBS information: block:  9375 ptr:  3047 data: 0x86820000 module:  6 information type:  8 information index:  2 MBS data:0000 ts: 0x00000026D22F755E

0x0000001F8A8A = 2067082 * 40ns = 82683280ns = 82.7us (which is < 0.1s as expected)

 ***     MBS information: block:  9388 ptr:  3291 data: 0x8680B041 module:  6 information type:  8 information index:  0 MBS data:B041 ts: 0x00000026D2C80C3A
 ***     MBS information: block:  9388 ptr:  3293 data: 0x86810045 module:  6 information type:  8 information index:  1 MBS data:0045 ts: 0x00000026D2C80C3A
 ***     MBS information: block:  9388 ptr:  3295 data: 0x86820000 module:  6 information type:  8 information index:  2 MBS data:0000 ts: 0x00000026D2C80C3A
 ***     MBS information: block:  9401 ptr:  5841 data: 0x8680D5F9 module:  6 information type:  8 information index:  0 MBS data:D5F9 ts: 0x00000026D360A31A
 ***     MBS information: block:  9401 ptr:  5843 data: 0x8681006B module:  6 information type:  8 information index:  1 MBS data:006B ts: 0x00000026D360A31A
 ***     MBS information: block:  9401 ptr:  5845 data: 0x86820000 module:  6 information type:  8 information index:  2 MBS data:0000 ts: 0x00000026D360A31A

19.05 R13_0 starts

23.19 Returned from dinner to find DAQ had stopped writing to disk at 22.19. Merger paused and Tape run ended successfully.
      No SYNC pulses being issued.
      Carried out system-wide checks. Clock status, ADC calib and ASIC clock passed for all 24 FEEs.
      Attachments 7 & 8 show errors messages issued upon fail of SYNC errors and SYNC pulses system checks.

      From attachment 8

      ( 6016000 SYNC / 9150 SYNC/s ) * 24 ~ 15800s => DAQ stopped 23.07 which is not consistent with observation
      as final write to disk files was c. 22.19 - note 23.21 for R13_47 indicates file closed at 23.21 cf. access
      times for R13_46, _45 etc

-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:09 R13_0
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:13 R13_1
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:50 R13_10
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:54 R13_11
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:58 R13_12
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:02 R13_13
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:06 R13_14
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:10 R13_15
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:14 R13_16
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:19 R13_17
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:23 R13_18
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:27 R13_19
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:17 R13_2
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:31 R13_20
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:35 R13_21
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:39 R13_22
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:43 R13_23
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:47 R13_24
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:51 R13_25
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:55 R13_26
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 20:59 R13_27
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:03 R13_28
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:08 R13_29
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:21 R13_3
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:12 R13_30
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:16 R13_31
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:20 R13_32
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:24 R13_33
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:28 R13_34
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:32 R13_35
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:36 R13_36
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:40 R13_37
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:44 R13_38
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:48 R13_39
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 19:25 R13_4
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:52 R13_40
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 21:56 R13_41
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 22:00 R13_42
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 22:04 R13_43
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 22:08 R13_44
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 22:13 R13_45
-rw-rw-rw-. 1 npg npgstaff 2097152000 Oct  6 22:17 R13_46
-rw-rw-rw-. 1 npg npgstaff  777519104 Oct  6 23:21 R13_47

23.21 R13_47 file closed

23.50 On trying to stop DAQ received nnaida1 timeout error (attachment 9).
      DAQ power-cycled, re-started with no data transfer 

14.30 Adjusted and checked insertion of AIDA snout into BRIKEN (CH2)n moderator.
      up-down    AIDA snout appears centred (@ (CH2)n centre) and tracks into (CH2)n moderator with no
significant vertical movement
      left right AIDA snout appears centred (@ (CH2)n centre) and tracks into (CH2)n moderator with ~3mm
horizontal movement left to right (looking upstream)

15.28 DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      B2F/F11 temperature +24.8 deg C, d.p. +11.8 deg C,  RH 44.4%

16.00 Power off to place ac mains distribution unit between AIDA and BRIKEN

18.34 Power up PCS request for remote data/diagnostics collection

I have been trying to compile the sort program I have been working on in Edinburgh so I can work on it locally
while at RIKEN.

When compiling i receive the error shown in make.log (attached) saying that there are undefined reference in
DataSource.cpp.
Also attached is the make output when compiled in Edinburgh - basically just 'unused variable' warnings.

This is exactly the same DataSource.cpp I am using in Edinburgh. I have carried out 'diff' on the DataSpyLib and
DataXferLib directories which are included
in the Makefile and no differences are present. I have also done this for DataSource directory and again, there
are no differences between what I am running here and in Edinburgh.

The only difference I have been able to observe so far is that in Edinburgh I am using g++ version:
 Using built-in specs.
 COLLECT_GCC=g++
 COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.8.5/lto-wrapper
 Target: x86_64-redhat-linux
 Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
--with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix
--enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions
--enable-gnu-unique-object --enable-linker-build-id --with-linker-hash-style=gnu
--enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-initfini-array
--disable-libgcj --with-isl=/builddir/build/BUILD /gcc-4.8.5-20150702/obj-x86_64-redhat-linux/isl-install
--with-cloog=/builddir/build/BUILD/gcc-4.8.5-20150702/obj-x86_64-redhat-linux/cloog-install
--enable-gnu-indirect-function --with-tune=generic --with-arch_32=x86-64 --build=x86_64-redhat-linux
 Thread model: posix
 gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC)

whereas on aidas1:
 Using built-in specs.
 Target: x86_64-redhat-linux
 Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
--with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix
--enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions
--enable-gnu-unique-object --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk
--disable-dssi --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile
--enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib
--with-ppl --with-cloog --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux
 Thread model: posix
 gcc version 4.4.7 20120313 (Red Hat 4.4.7-17) (GCC)

The libraries used are all found in LD_LIBRARY_PATH.
On aidas1 this is: /MIDAS/Linux/lib64:/homes/npg/root/lib:/homes/npg/root/lib:/MIDAS/Linux/lib64:/homes/npg/root/lib
and in Edinburgh:
/Disk/ds-sopa-group/np/RIKEN/AIDAsort/MIDAS/Linux/lib64:/Disk/ds-sopa-group/np/thehubdata/thehub6/jlab_software/Linux_Scientific6-x86_64-gcc4.4.6/root/5.34.23/lib:


*********UPDATE 03/10/16 *************

The methods are defined in /MIDAS/DataPackage/DataXferLib/V4_TCP/transfer.c

This is in the expected INCLUDES path of: INCLUDES=  -I/MIDAS/DataPackage/DataXferLib/V4_TCP -I/MIDAS/DataPackage/DataSpyLib

14.15 DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      B2F/F11 temperature +27.5 deg C, d.p. +10.6 deg C, 34.3 RH %

14.24 R8 starts

      ASIC settings 2016Sep02-18.17.01

      Master MACB serial #13 (see https://elog.ph.ed.ac.uk/AIDA/367)
      Master MACB mode 5

      NIM 50MHz -> Phillips 726 NIM-TTL-NIM -> Master MACB - external clock (rear panel)

      Note Fuji Diamond Tool Ltd 1020 NIM-TTL level adaptor (NIM, pink front panel) with signal
      rise and falltimes quoted as <10ns produced poor quality 25/50MHz clock - the Phillips 726
      has significantly faster rise and falltimes and drices a higher amplitude signal to 50R load.

      BNC PB-4 trigger output -> Ortec SCA -> LeCroy 429A (500ns width) -> Master MACB - Correlation DAQ
Accepted Trigger

      BNC PB-4 frequency c. 26Hz

      Statistics - see attachments 4-14
      Master Timestamp - see attachment 15
      Correlation Status & Control - see attachment 16

      Successive correlation scaler events from R8_0

 ***     MBS information: block:   120 ptr:  7827 data: 0x868068B4 module:  6 information type:  8 information
index:  0 MBS data:68B4 ts: 0x00000019979ADAF8
 ***     MBS information: block:   120 ptr:  7829 data: 0x86812F00 module:  6 information type:  8 information
index:  1 MBS data:2F00 ts: 0x00000019979ADAF8
 ***     MBS information: block:   120 ptr:  7831 data: 0x86820000 module:  6 information type:  8 information
index:  2 MBS data:0000 ts: 0x00000019979ADAF8

 ***     MBS information: block:   126 ptr:  7005 data: 0x8680FDF4 module:  6 information type:  8 information
index:  0 MBS data:FDF4 ts: 0x0000001997D52FF8
 ***     MBS information: block:   126 ptr:  7007 data: 0x86812F0E module:  6 information type:  8 information
index:  1 MBS data:2F0E ts: 0x0000001997D52FF8
 ***     MBS information: block:   126 ptr:  7009 data: 0x86820000 module:  6 information type:  8 information
index:  2 MBS data:0000 ts: 0x0000001997D52FF8

0x2F0EFDF4 - 0x2F0068B4 = 0xE9540 = 955712 * 40ns (assume 25MHz) = 38228480ns = 38.2ms

0x1997D52FF8 - 0x19979ADAF8 = 0x3A5500 = 3822848 * 10ns = 38228480ns = 38.2ms

=> correlation clock frequency = 25MHz

Master MACB (serial #13) mode = 5, 50MHz clock to external clock input (rear panel)
       clock output                             25MHz
       reset output                             reset not observed at DAQ GO
                                                reset observed using Correlation status & control tab -> Force
Correlation Reset
       reset request output                     not tested
       correlation DAQ accepted trigger output  c.26Hz

Could not persuade MACB serial #13 to operate in mode 0, external clock input (rear panel) disconnected) 
Persistent failures to ReSYNC by nnaida11, 12, 17, 18, 19, & 20 (see https://elog.ph.ed.ac.uk/AIDA/357)
following RESET/SETUP, FEE64 power cycle, MACB NIM bin power cycle and re-seating master MACB HDMI cables

Switch back to previous Master MACB serial #11 

Master MACB (serial #11) mode = 0
       clock output                             25MHz
       reset output                             reset not observed at DAQ GO
                                                reset not observed using Correlation status & control tab -> Force
Correlation Reset
       reset request output                     not tested
       correlation DAQ accepted trigger output  not observed

Installed Xilinx 14.7 LabTools + (free) WebPack license

Start iMPACT

Connect Xilinx programmer via 14-way ribbon cable to MACB PCB jtag connector
and connect USB cable to laptop

Powerup NIM bin with MACB (serial #13)

Auto-install Xilinx programmer driver

Use iMPACT Wizard to automagically find Xilinx device of MACB

Load new *.jed file
 Operations -> Program
 Operations -> Verify

TTY console log

Welcome to iMPACT
iMPACT Version: 14.7
Project: C:\Xilinx\14.7\LabTools\LabTools\auto_project.ipf created.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
INFO:iMPACT - Digilent Plugin: no JTAG device was found.
AutoDetecting cable. Please wait.
*** WARNING ***: When port is set to auto detect mode, cable speed is set to default 6 MHz regardless of explicit arguments supplied for 
setting the baud rates
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Driver file xusb_xp2.sys found.
 Driver version: src=2301, dest=2301.
 Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, 
version = 1021.
 Cable PID = 0008.
 Max current requested during enumeration is 300 mA.
Type = 0x0005.
write (count, cmdBuffer, dataBuffer) failed C0000004.
 Cable Type = 3, Revision = 0.
 Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 2301.
File version of C:/Xilinx/14.7/LabTools/LabTools/data/xusb_xp2.hex = 2401.
Firmware hex file version = 2401.
Downloading C:/Xilinx/14.7/LabTools/LabTools/data/xusb_xp2.hex.
Downloaded firmware version = 2401.
PLD file version = 200Dh.
 PLD version = 200Dh.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Type = 0x0005.
ESN option: 000013E7C24E01.
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: 01/10/2016 09:30:42
// *** BATCH CMD : Identify -inferir 
PROGRESS_START - Starting Operation.
Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc2c128, Version : 1
INFO:iMPACT:1777 - 
Reading C:/Xilinx/14.7/LabTools/LabTools/xbr/data/xc2c128.bsd...
INFO:iMPACT:501 - '1': Added Device xc2c128 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
PROGRESS_END - End Operation.
Elapsed time =      6 sec.
// *** BATCH CMD : identifyMPM 
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/td/Local Documents/misc/macb_top_revB.jed"
'1': Loading file 'C:/Users/td/Local Documents/misc/macb_top_revB.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc2c128 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
INFO:iMPACT - Current time: 01/10/2016 09:32:54
// *** BATCH CMD : Program -p 1 -e -v 
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 33000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
'1': Erasure completed successfully.
'1': Programming device...
done.
'1': Verifying device...
done.
'1': Setting ISC done bits...done
'1': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      2 sec.
INFO:iMPACT - Current time: 01/10/2016 09:33:01
// *** BATCH CMD : Verify -p 1 
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 33000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': Verifying device...
done.
'1': Verification completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.

11.00 Moved detector stack forward several cm. 1st DSSD now ~6cm from end of snout. Middle of stack now ~47cm from
base -> approx centre of BRIKEN.
      
      4 new 79cm ribbon cables (+kaptons) added to p-side of first two DSSDs.
      
      Bias and pulser re-connected to all relevant FEEs. 

      Detector order unchanged, i.e. DSSD1 has same serial number as in June 2016 expt. Same for DSSDs 2-6.
      
      DSSD-to-FEE map also unchanged.

15.45 R7 starts

      ASIC settings 2016Sep02-18.17.01

      BNC PB-4
       Amplitude 90,000, x2 attenuator IN
       Frequency c. 26Hz

      Master MACB
       mode 5
       50MHz external clock (rear panel)
       BNC PB-4 trigger output -> Ortec SCA -> LeCroy 429A -> Master MACB Correlation DAQ Accepted Trigger - not
working - firmware issue?

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change) *and* nnaida7, nnaida21
fail ADC calibration

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5,
nnaida19 & nnaida20 statistics - see attachments 4-14

      Analysis of R7_0 - ADC data synchronised

The AIDA correlation L, M & H statistics count 3x for each correlation trigger,
i.e. counts and rates displayed by statistics are 3x actual counts and rates 

11.37 Attempt to use external 50MHz clock for Master MACB (w/ 50MHz front panel label)

      NIM 50MHz -> NIM-TTL translator -> Master MACB (rear panel)

      Master MACB mode 0 -> 5

      Fails to ReSync, clock errors etc - see attachments 1-5

      Change NIM 50MHz -> 25MHz (to improve signal quality) and attempt ReSync (no power FEE64 power cycle) - no
change 

14.30 Master MACB mode -> 0

      NIM 25MHz -> Master MACB correlation clock input (front panel)

      BNC PB_4 frequency c. 26Hz
      Trigger output -> SCA -> LeCroy 429A -> Master MACB accepted trigger input

./analyser2 v /TapeData/Sept2016/R5_0 | grep MBS

 :
 :

 ***     MBS information: block:   471 ptr:  7203 data: 0x86807CAB module:  6 information type:  8 information
index:  0 MBS data:7CAB ts: 0x00000017AC2C4582
 ***     MBS information: block:   471 ptr:  7205 data: 0x8681575E module:  6 information type:  8 information
index:  1 MBS data:575E ts: 0x00000017AC2C4582
 ***     MBS information: block:   471 ptr:  7207 data: 0x86820000 module:  6 information type:  8 information
index:  2 MBS data:0000 ts: 0x00000017AC2C4582
 ***     MBS information: block:   471 ptr: 15767 data: 0x86800FA8 module:  6 information type:  8 information
index:  0 MBS data:0FA8 ts: 0x00000017AC669176
 ***     MBS information: block:   471 ptr: 15769 data: 0x8681576D module:  6 information type:  8 information
index:  1 MBS data:576D ts: 0x00000017AC669176
 ***     MBS information: block:   471 ptr: 15771 data: 0x86820000 module:  6 information type:  8 information
index:  2 MBS data:0000 ts: 0x00000017AC669176

0x576D0FA8 - 0x575E7CAB = 0xE92FD = 955133 * 40ns = 38205320ns = 38.2ms => 26Hz
0x00000017AC669176 - 0x00000017AC2C4582 = 0x3a4bf4 = 3820532 * 10ns = 38205320ns QED


15.45 Master MACB mode 0 -> 5
      
      NIM 50MHz -> Phillips 726 NIM-TTL-NIM -> Master MACB external clock (rear panel)
      Phillips 726 provides better quality TTL signal with c. 3ns rise/falltimes and 3.5V amplitude into 50 Ohm
cf. NIM-TTL-NIM module used previously
      See http://www.phillipsscientific.com/pdf/726ds.pdf

      RESET/SETUP DAQ OK 

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

      Start test run R6_0 to disk but no AIDA issue correlation triggers are recorded

      Can manually issue correlation triggers and resets via Correlation Status & Control tab

      Observe statistics count 3x for each trigger and reset - see https://elog.ph.ed.ac.uk/AIDA/362

aidas1> ./analyser2 v /TapeData/Sept2016/R6_0 | grep MBS

 :
 :
 Test #1 - manual correlation trigger

 ***     MBS information: block:  9626 ptr:  9991 data: 0x86807774 module:  6 information type:  8 information
index:  0 MBS data:7774 ts: 0x00000077517D2816
 ***     MBS information: block:  9626 ptr:  9993 data: 0x86817213 module:  6 information type:  8 information
index:  1 MBS data:7213 ts: 0x00000077517D2816
 ***     MBS information: block:  9626 ptr:  9995 data: 0x86820003 module:  6 information type:  8 information
index:  2 MBS data:0003 ts: 0x00000077517D2816

 :
 :
 Test #2 - manual correlation trigger x2 separated by ~10s

 ***     MBS information: block: 16751 ptr: 10787 data: 0x86807285 module:  6 information type:  8 information
index:  0 MBS data:7285 ts: 0x000000833335145A
 ***     MBS information: block: 16751 ptr: 10789 data: 0x86816A81 module:  6 information type:  8 information
index:  1 MBS data:6A81 ts: 0x000000833335145A
 ***     MBS information: block: 16751 ptr: 10791 data: 0x86820006 module:  6 information type:  8 information
index:  2 MBS data:0006 ts: 0x000000833335145A

 ***     MBS information: block: 16929 ptr:  8209 data: 0x86807BC5 module:  6 information type:  8 information
index:  0 MBS data:7BC5 ts: 0x000000837F39395A
 ***     MBS information: block: 16929 ptr:  8211 data: 0x86817D82 module:  6 information type:  8 information
index:  1 MBS data:7D82 ts: 0x000000837F39395A
 ***     MBS information: block: 16929 ptr:  8213 data: 0x86820006 module:  6 information type:  8 information
index:  2 MBS data:0006 ts: 0x000000837F39395A

0x67D827BC5 − 0x66A817285 = 0x13010940 = 318835008 × 20ns = 6376700160ns = 6.4s

0x837F39395A - 0x833335145A = 0x4C042500 = 1275340032 * 10ns = 12753400320ns = 12.8s => correlation clock
frequency = 25MHz *not* 50MHz

 :
 :
 Test #3 - manual correlation reset, followed by correlation trigger ~2s later 

 ***     MBS information: block: 17065 ptr: 15987 data: 0x86804D22 module:  6 information type:  8 information
index:  0 MBS data:4D22 ts: 0x00000083B96F05A6
 ***     MBS information: block: 17065 ptr: 15989 data: 0x86810344 module:  6 information type:  8 information
index:  1 MBS data:0344 ts: 0x00000083B96F05A6
 ***     MBS information: block: 17065 ptr: 15991 data: 0x86820000 module:  6 information type:  8 information
index:  2 MBS data:0000 ts: 0x00000083B96F05A6

0x3444d22 = 54807842 * 40ns = 2192313680ns = 2.2s

*re-check*

Correlation trigger input OK, pulse width 500ns
External clock is 50MHz
MACB master mode 6

So ... correlation clock frequency is 25MHz and Correlation DAQ Accepted Trigger not working

18.30 Per PCS request

      Master MACB clock output  25Mhz
                  reset output  not observed at DAQ GO as expected

11.20 R1 stops

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

      No merger error messages - see attachment 4

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5,
nnaida19 & nnaida20 statistics - see attachments 5-15

      Analysis of R1_304 - ADC data synchronised

aidas1> ./analyser2 /TapeData/Sept2016/R1_304
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      28207
          ADC data format:  105059677 (  495121.2 Hz)
        Other data format:  125077092 (  589458.4 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        143 (       0.7 Hz)
                               RESUME:        143 (       0.7 Hz)
                              SYNC100:    1940061 (    9143.0 Hz)
                           FEE64 disc:  123135099 (  580306.3 Hz)
                             MBS info:       1646 (       7.8 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        543 (       2.6 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      212.190 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.906 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       3.664 s
 FEE module #:   6 elapsed dead time       0.681 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.019 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.003 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.144 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.753 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.108 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:    8.492s ( 3321.523 blocks/s, 207.595 Mb/s)

11.32 DSSSD Bias off
      FEE64 power off

17.00 nnaida1/nnaida2 & nnaida9/nnaida10
      AIDA adaptor PCB rev C -> AIDA adaptor PCB rev D

      Adaptor PCB damaged during re-install of AIDA DSSSD mounting bracket
      to adjust to vertical.

      nnaida13/nnaida14
      AIDA adaptor PCB rev D -> AIDA adaptor PCB rev D

Spectrum display software updated
    maximum number of galleries increased to 30
    layouts may be saved to, and restored from, files /tmp/LayOut<n>.mlf where <n> = 1..8

mv /MIDAS/TclHttpd/Html/Spectrum /MIDAS/TclHttpd/Html/Spectrum.BAK-29.0916
mv /MIDAS/TclHttpd/Html/Spectrum_new_22Aug /MIDAS/TclHttpd/Html/Spectrum

aidas1> ls -l /MIDAS/TclHttpd/Html/Spectrum
total 136
-rw-r--r--. 1 npg npgstaff 32620 Aug 22 20:08 analysis.tcl
-rw-r--r--. 1 npg npgstaff  2179 Aug 22 20:08 example.html
drwxr-sr-x. 2 npg npgstaff  4096 Aug 22 20:11 images
-rwxr-xr-x. 1 npg npgstaff  5851 Aug 22 20:08 show.tcl
-rw-r--r--. 1 npg npgstaff  1246 Aug 22 20:08 SP2.txt
-rw-r--r--. 1 npg npgstaff     0 Aug 22 20:08 SP3.txt
-rw-r--r--. 1 npg npgstaff     0 Aug 22 20:08 SP4.txt
-rw-r--r--. 1 npg npgstaff     0 Aug 22 20:08 SP5.txt
-rw-r--r--. 1 npg npgstaff  6631 Aug 22 20:08 Spectrum.js
-rw-r--r--. 1 npg npgstaff 44386 Aug 22 20:08 Spectrum.tcl
-rw-r--r--. 1 npg npgstaff 30765 Aug 22 20:08 Spectrum.tml

aidas1> ls -l /MIDAS/TclHttpd/Html/Spectrum.BAK-280916
total 152
-rw-r--r--. 1 npg npgstaff 29462 Feb  2  2016 analysis.tcl
drwxr-sr-x. 2 npg npgstaff  4096 Oct  9  2013 flot
-rw-r--r--. 1 npg npgstaff   214 Mar 15  2016 fort.12
-rw-r--r--. 1 npg npgstaff   678 Mar 15  2016 fort.8
-rw-r--r--. 1 npg npgstaff  1253 Feb  2  2016 Global.tcl
drwxr-sr-x. 2 npg npgstaff  4096 Oct  9  2013 images
-rw-r--r--. 1 npg npgstaff  2173 Feb  2  2016 options.html
-rwxr-xr-x. 1 npg npgstaff  5851 Feb  2  2016 show.tcl
-rw-r--r--. 1 npg npgstaff  1246 Feb  2  2016 SP2.txt
-rw-r--r--. 1 npg npgstaff     0 Feb  2  2016 SP3.txt
-rw-r--r--. 1 npg npgstaff     0 Feb  2  2016 SP4.txt
-rw-r--r--. 1 npg npgstaff     0 Feb  2  2016 SP5.txt
-rw-r--r--. 1 npg npgstaff  6438 Feb  2  2016 Spectrum.js
-rw-r--r--. 1 npg npgstaff 43204 Feb  2  2016 Spectrum.tcl
-rw-r--r--. 1 npg npgstaff 29496 Feb  2  2016 Spectrum.tml

14.40 AIDA power up

      Julabo FL11006 set point +20 deg C

      DSSSD biases & leakage currents OK - see attachments 1 & 2

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

15.02 R1 (directory /TapeData/Sept2016) starts

      ASIC settings 2016Sep02-18.17.01

15.46 FEE temperatures OK - see attachment 3

      No merger error messages

      R1_6 ADC data synchronised

23.07 R6_119 ADC data synchronised
      FEE temperatures OK - see attachment 4

Used the layout reported in ELOG357 and updated the layout.txt file used in the "Layout and Status" browser window.

The file is in /MIDAS/config/TclHttpd/aidas1

The browser window "Layout and Status" is accessed from the Control browser window.

It is intended to be used to determine if the Embedded Linux is operating in the FEE64. Each FEE64 in the layout.txt file is pinged with a timeout of 1 second. The layout then shows red for no response and green for a response.

14.20 R17 continues

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

      No merger error messages

     AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5 &
nnaida20 statistics - see attachments 4-14

     Analysis of R17_584 - FEE64 data synaidas1> ./analyser2 /TapeData/Aug2016/R17_584
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  258868072 ( 1733415.6 Hz)
        Other data format:    2219928 (   14864.9 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         94 (       0.6 Hz)
                               RESUME:         94 (       0.6 Hz)
                              SYNC100:    1365786 (    9145.5 Hz)
                           FEE64 disc:     842248 (    5639.8 Hz)
                             MBS info:      11706 (      78.4 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        400 (       2.7 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      149.340 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.026 s
 FEE module #:   3 elapsed dead time       0.007 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.439 s
 FEE module #:   6 elapsed dead time       0.329 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.104 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.001 s
 FEE module #:  13 elapsed dead time       0.515 s
 FEE module #:  14 elapsed dead time       0.290 s
 FEE module #:  15 elapsed dead time       0.078 s
 FEE module #:  16 elapsed dead time       0.036 s
 FEE module #:  17 elapsed dead time       0.379 s
 FEE module #:  18 elapsed dead time       0.044 s
 FEE module #:  19 elapsed dead time       0.122 s
 FEE module #:  20 elapsed dead time       0.063 s
 FEE module #:  21 elapsed dead time       0.218 s
 FEE module #:  22 elapsed dead time       0.467 s
 FEE module #:  23 elapsed dead time       0.232 s
 FEE module #:  24 elapsed dead time       0.059 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   26.172s ( 1222.687 blocks/s,  76.418 Mb/s)
chronised - see attachment 16

aidas1> ./analyser2 /TapeData/Aug2016/R17_584
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  258868072 ( 1733415.6 Hz)
        Other data format:    2219928 (   14864.9 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         94 (       0.6 Hz)
                               RESUME:         94 (       0.6 Hz)
                              SYNC100:    1365786 (    9145.5 Hz)
                           FEE64 disc:     842248 (    5639.8 Hz)
                             MBS info:      11706 (      78.4 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        400 (       2.7 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      149.340 s
 FEE module #:   1 elapsed dead time       0.000 s
 FEE module #:   2 elapsed dead time       0.026 s
 FEE module #:   3 elapsed dead time       0.007 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.439 s
 FEE module #:   6 elapsed dead time       0.329 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.104 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.001 s
 FEE module #:  13 elapsed dead time       0.515 s
 FEE module #:  14 elapsed dead time       0.290 s
 FEE module #:  15 elapsed dead time       0.078 s
 FEE module #:  16 elapsed dead time       0.036 s
 FEE module #:  17 elapsed dead time       0.379 s
 FEE module #:  18 elapsed dead time       0.044 s
 FEE module #:  19 elapsed dead time       0.122 s
 FEE module #:  20 elapsed dead time       0.063 s
 FEE module #:  21 elapsed dead time       0.218 s
 FEE module #:  22 elapsed dead time       0.467 s
 FEE module #:  23 elapsed dead time       0.232 s
 FEE module #:  24 elapsed dead time       0.059 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   26.172s ( 1222.687 blocks/s,  76.418 Mb/s)

15.08 R17 stops

Detector bias OFF
FEE64 power OFF 
USB-controlled ac mains relay OFF
Julabo FL11006 recirculating chiller OFF
ac mains cables to ac mains distributor disconnected
network cables aida1 and aida2 disconnected, rolled up and secured to stairwell rails

207Bi source removed and returned to B2F/F11 storage location

                                                   UP
                                       nnaida1  nnaida9   nnaida17
LEFT                                   nnaida2  nnaida10  nnaida18                                   RIGHT
          nnaida23  nnaida15  nnaida7                               nnaida3   nnaida11  nnaida19
          nnaida24  nnaida16  nnaida8                               nnaida4   nnaida12  nnaida20
                                       nnaida5  nnaida13  nnaida21
                                       nnaida6  nnaida14  nnaida22
                                                  DOWN

                                           <LOOKING UPSTREAM>

LEFT-RIGHT n+n ohmic strips
UP-DOWN    p+n junction strips


    1     2     3     4     5     6     7     8     9    10    11    MACB NIM Module #   spare 1  spare 2

        <- #1 <- #2 <- #2 <- #2 <- #2 <- #1 <- #7 <- #7 <- #7 <- #7  Next

  -> #2 -> #3   6*   21     7    23   -> #8   1    17     3    19    Port 1
  -> #7 -> #4   5    22     8    24   -> #9   2    18     4    20    Port 2
        -> #5  13    29    15    31   -> #10  9    25    11    27    Port 3
        -> #6  14    30    16    32   -> #11 10    26    12    28    Port 4

    **    2     2     3     3     3     3     3     3     3     3    Mode
          y     y                                                    Rev B                        y

* = Master Timestamp FEE64

** MACB (rev A serial #13 mode 5) external 50MHz clock
   or
   MACB (rev B serial #11 mode 0) internal 50MHz cloxk

MACB HDMI cabling mechanically secured by 1U cable organiser above MACB NIM bin and by AIDA frame
- see attachments 1-3

14.20 R13 continues

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

      Merger errors messages for Q 19 - see attachment 4

     AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5 &
nnaida20 statistics - see attachments 6-16

     Analysis of R16_331 - FEE64 data synchronised - see attachment 17

aidas1> ./analyser2 /TapeData/Aug2016/R16_331
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  182657196 ( 1048839.0 Hz)
        Other data format:   78430804 (  450358.8 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         94 (       0.5 Hz)
                               RESUME:         95 (       0.5 Hz)
                              SYNC100:    1591884 (    9140.8 Hz)
                           FEE64 disc:   76825108 (  441138.8 Hz)
                             MBS info:      13623 (      78.2 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:       4398 (      25.3 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      174.152 s

 FEE module #:   1 elapsed dead time       0.189 s
 FEE module #:   2 elapsed dead time       0.705 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       3.321 s
 FEE module #:   6 elapsed dead time       0.467 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.124 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.284 s
 FEE module #:  14 elapsed dead time       0.035 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.684 s
 FEE module #:  18 elapsed dead time       0.012 s
 FEE module #:  19 elapsed dead time       0.000 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.158 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   27.594s ( 1159.683 blocks/s,  72.480 Mb/s)


14.29 R16 stops


15.30 Noise measurements
      Found incorrect test pulse polarity connected to p+n and n+n FEE64s - corrected - see attachment 18

DSSSD #1 FEE64s, shaping time(us) versus pulser peak widths ch FWHM

      17  22  20  23 spectrum 1.8.L 
0.5  180 202 130 104
1    147 177 121 128
2    110 164 116 128
2.5   97 154 103 131
3.5   82 123  93 110
4.5   75 105  88 104
5.5   71  93  86  99
6     71  90  84  97
6.5   69  91  87  94
7     70  87  80  94
7.5   70  84  86  93
8     71  87  87  92
      
      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

16.26 R17 starts
      Pulser + 207Bi source

      ASIC settings 2016Sep02-18.17.01
      Discriminator masks -> 0-31 0x0 32-63 0x800000
      Correlation scaler trigger delay 0x180 -> 0x5
      Slow comparator 0x8

      Analysis of R17_0 - FEE64 data synchronised - see attachment 19

      top - attachment 20
      merger 1.9M items/s tapeserver 15Mb/s

14.20 R13 continues

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

      Merger errors messages for Q 19 - see attachment 4

     AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5 &
nnaida20 statistics - see attachments 5-15

     Analysis of R13_317 - FEE64 data synchronised - see attachment 16

aidas1> ./analyser2 /TapeData/Aug2016/R13_317
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  107206849 (  490913.0 Hz)
        Other data format:  153881151 (  704640.2 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        134 (       0.6 Hz)
                               RESUME:        134 (       0.6 Hz)
                              SYNC100:    1997059 (    9144.8 Hz)
                           FEE64 disc:  151882150 (  695486.5 Hz)
                             MBS info:       1674 (       7.7 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:       1095 (       5.0 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      218.383 s
 FEE module #:   1 elapsed dead time       0.437 s
 FEE module #:   2 elapsed dead time       0.298 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       2.671 s
 FEE module #:   6 elapsed dead time       1.429 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.000 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.129 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.010 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.392 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.021 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   19.699s ( 1624.430 blocks/s, 101.527 Mb/s)

18.30 HDMI cabling to NIM MACB modules mechanically secured by 1U 'cable organiser' installed above MACB NIM bin
and by AIDA stand frame
  
      ALL system-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)

18.55 R16 starts

      ASIC settings 2016Sep02-18.17.01
      Discriminator masks -> 0x0
      Correlation scaler trigger delay 0x180 -> 0x5

      Analysis of R16_0 - FEE64 data synchronised

14.20 R11 continues

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK *except* nnaida19 fails ASIC timestamp check (no change)
      Free memory - see attachment 4

      Merger errors messages for links 4 & 5 - see attachment 5

     AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5 &
nnaida20 statistics - see 
attachments 6-16

Analysis of R11_645 - FEE64 data synchronised - see attachment 17

aidas1> ./analyser2 /TapeData/Aug2016/R11_645
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  156678476 ( 1098367.0 Hz)
        Other data format:  104409524 (  731944.6 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         92 (       0.6 Hz)
                               RESUME:         92 (       0.6 Hz)
                              SYNC100:    1303563 (    9138.4 Hz)
                           FEE64 disc:  103104691 (  722797.4 Hz)
                             MBS info:       1086 (       7.6 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        650 (       4.6 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      142.647 s
 FEE module #:   1 elapsed dead time       0.186 s
 FEE module #:   2 elapsed dead time       0.427 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       1.001 s
 FEE module #:   6 elapsed dead time       3.508 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.053 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.100 s
 FEE module #:  14 elapsed dead time       0.164 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.264 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.000 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.028 s
 FEE module #:  22 elapsed dead time       0.171 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   15.730s ( 2034.269 blocks/s, 127.142 Mb/s)

14.54 R11 stopped (two DAQ STOP commands required)

15.00 New firmware version 8.24 installed (/MIDAS/Aida/FEE_GF_Feb16_24.bin) 
      - guarantee SYNC is the last data item with timestamp ending 0x000000A0 to be output (merger assumes this)
      - ASIC clock runs when output disabled (ASIC requires periodic reset)

18.40 R13 starts

      ASIC settings 2016Sep02-18.17.01
      Discriminator masks -> 0x0
      Correlation scaler trigger delay 0x180 -> 0x5

13.33 R11 starts

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      Slow comparator 0x10
      LEC/MEC fast comparator 0xff
      From Correlation Status & Control tab change Trigger delay 0x180

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      Frequency c. 5Hz

      B2F/F11 temp +24.8 deg C, d.p. +11.9 deg C, RH 44.8%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      System-wide checks OK - see attachments 4-9

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, AIDA disc, nnaida6, nnaida5 & nnaida20 statistics - see 
attachments 10-20
      Good event rate varies from 5-320k / FEE64

      Merger/tapeserver - see attachments 21-22
      Merged data rate ~2-3M data items/s, c. 16M to disk 

Analysis of R11_93 - FEE64 data synchronised - see attachment 23

aidas1> ./analyser2 /TapeData/Aug2016/R11_93
 *** GREAT format 3.2.0 analyser - TD - May 2014
 ***            ADC data: block:  3402 ptr: 15985 data: 0xC4C37FDB module: 19 fail: 0 range: 0 id:  1219 channel:  3 adc: 32731  ts:
0x00000120C00000A0 OLD: ts: 0x00000120D000008D tag: 3 type: 0
 *** ERROR: READ I/O error:       5002
                   blocks:      32000
          ADC data format:  170966247 ( 1387907.5 Hz)
        Other data format:   90121753 (  731610.3 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:        106 (       0.9 Hz)
                               RESUME:        106 (       0.9 Hz)
                              SYNC100:    1124303 (    9127.1 Hz)
                           FEE64 disc:   88996299 (  722473.8 Hz)
                             MBS info:        939 (       7.6 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:        571 (       4.6 Hz)

                Timewarps:        ADC:          1 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          0 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      123.183 s
 FEE module #:   1 elapsed dead time       0.370 s
 FEE module #:   2 elapsed dead time       0.317 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       1.058 s
 FEE module #:   6 elapsed dead time       2.581 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.130 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       1.078 s
 FEE module #:  14 elapsed dead time       0.172 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.223 s
 FEE module #:  18 elapsed dead time       0.017 s
 FEE module #:  19 elapsed dead time       0.089 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       2.291 s
 FEE module #:  22 elapsed dead time       0.450 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   21.035s ( 1521.263 blocks/s,  95.079 Mb/s)

Verbose data dump around time warp (file R11_93, block 3402, ptr 15985)

 ***            ADC data: block:  3402 ptr: 15901 data: 0xC5777559 module: 21 fail: 0 range: 0 id:  1399 channel: 55 adc: 30041  ts:
0x00000120CFFFF895
 *** FEE64 discriminator: block:  3402 ptr: 15903 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFF895
 ***            ADC data: block:  3402 ptr: 15905 data: 0xC17A793F module:  5 fail: 0 range: 0 id:   378 channel: 58 adc: 31039  ts:
0x00000120CFFFF895
 *** FEE64 discriminator: block:  3402 ptr: 15907 data: 0x86640080 module:  6 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFF898
 *** FEE64 discriminator: block:  3402 ptr: 15909 data: 0x82640080 module:  2 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFF89A
 *** FEE64 discriminator: block:  3402 ptr: 15911 data: 0x81640080 module:  1 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFF89B
 ***            ADC data: block:  3402 ptr: 15913 data: 0xC5018140 module: 20 fail: 0 range: 0 id:  1281 channel:  1 adc: 33088  ts:
0x00000120CFFFF8D5
 ***            ADC data: block:  3402 ptr: 15915 data: 0xC3617FA1 module: 13 fail: 0 range: 0 id:   865 channel: 33 adc: 32673  ts:
0x00000120CFFFF92D
 ***            ADC data: block:  3402 ptr: 15917 data: 0xC5417DDE module: 21 fail: 0 range: 0 id:  1345 channel:  1 adc: 32222  ts:
0x00000120CFFFF95D
 ***            ADC data: block:  3402 ptr: 15919 data: 0xC57A7D7B module: 21 fail: 0 range: 0 id:  1402 channel: 58 adc: 32123  ts:
0x00000120CFFFF95D
 ***            ADC data: block:  3402 ptr: 15921 data: 0xC3687F55 module: 13 fail: 0 range: 0 id:   872 channel: 40 adc: 32597  ts:
0x00000120CFFFF9F5
 *** FEE64 discriminator: block:  3402 ptr: 15923 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFB5B
 *** FEE64 discriminator: block:  3402 ptr: 15925 data: 0x86640080 module:  6 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFB5C
 *** FEE64 discriminator: block:  3402 ptr: 15927 data: 0x82640080 module:  2 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFB5F
 ***            ADC data: block:  3402 ptr: 15929 data: 0xC35F7DAD module: 13 fail: 0 range: 0 id:   863 channel: 31 adc: 32173  ts:
0x00000120CFFFFB85
 ***            ADC data: block:  3402 ptr: 15931 data: 0xC3307F91 module: 12 fail: 0 range: 0 id:   816 channel: 48 adc: 32657  ts:
0x00000120CFFFFBB5
 ***            ADC data: block:  3402 ptr: 15933 data: 0xC5A67F6D module: 22 fail: 0 range: 0 id:  1446 channel: 38 adc: 32621  ts:
0x00000120CFFFFBDD
 ***            ADC data: block:  3402 ptr: 15935 data: 0xC0C0845E module:  3 fail: 0 range: 0 id:   192 channel:  0 adc: 33886  ts:
0x00000120CFFFFC35
 ***            ADC data: block:  3402 ptr: 15937 data: 0xC3657ED9 module: 13 fail: 0 range: 0 id:   869 channel: 37 adc: 32473  ts:
0x00000120CFFFFC4D
 *** FEE64 discriminator: block:  3402 ptr: 15939 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFC77
 *** FEE64 discriminator: block:  3402 ptr: 15941 data: 0x86640080 module:  6 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFC7A
 *** FEE64 discriminator: block:  3402 ptr: 15943 data: 0x81640080 module:  1 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFC7C
 *** FEE64 discriminator: block:  3402 ptr: 15945 data: 0x82640080 module:  2 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFC7C
 ***            ADC data: block:  3402 ptr: 15947 data: 0xC4DC8041 module: 19 fail: 0 range: 0 id:  1244 channel: 28 adc: 32833  ts:
0x00000120CFFFFCB8
 *** FEE64 discriminator: block:  3402 ptr: 15949 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFCC6
 ***            ADC data: block:  3402 ptr: 15951 data: 0xC38C7EF8 module: 14 fail: 0 range: 0 id:   908 channel: 12 adc: 32504  ts:
0x00000120CFFFFD3D
 ***            ADC data: block:  3402 ptr: 15953 data: 0xC4817ED8 module: 18 fail: 0 range: 0 id:  1153 channel:  1 adc: 32472  ts:
0x00000120CFFFFD85
 ***            ADC data: block:  3402 ptr: 15955 data: 0xC3577EE4 module: 13 fail: 0 range: 0 id:   855 channel: 23 adc: 32484  ts:
0x00000120CFFFFDDD
 ***            ADC data: block:  3402 ptr: 15957 data: 0xC1B67F41 module:  6 fail: 0 range: 0 id:   438 channel: 54 adc: 32577  ts:
0x00000120CFFFFE35
 *** FEE64 discriminator: block:  3402 ptr: 15959 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFF44
 ***            ADC data: block:  3402 ptr: 15961 data: 0xC5517FCD module: 21 fail: 0 range: 0 id:  1361 channel: 17 adc: 32717  ts:
0x00000120CFFFFF9D
 ***            ADC data: block:  3402 ptr: 15963 data: 0xC5957FEA module: 22 fail: 0 range: 0 id:  1429 channel: 21 adc: 32746  ts:
0x00000120CFFFFFC5
 ***            ADC data: block:  3402 ptr: 15965 data: 0xC5B37E90 module: 22 fail: 0 range: 0 id:  1459 channel: 51 adc: 32400  ts:
0x00000120CFFFFFC5
 *** FEE64 discriminator: block:  3402 ptr: 15967 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120CFFFFFD9
 ***            ADC data: block:  3402 ptr: 15969 data: 0xC4B77FCE module: 18 fail: 0 range: 0 id:  1207 channel: 55 adc: 32718  ts:
0x00000120CFFFFFDD
 ***            ADC data: block:  3402 ptr: 15971 data: 0xC5047FBE module: 20 fail: 0 range: 0 id:  1284 channel:  4 adc: 32702  ts:
0x00000120CFFFFFDD
 ***            ADC data: block:  3402 ptr: 15973 data: 0xC3627FFD module: 13 fail: 0 range: 0 id:   866 channel: 34 adc: 32765  ts:
0x00000120D0000035
 *** FEE64 discriminator: block:  3402 ptr: 15975 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120D0000059
 *** FEE64 discriminator: block:  3402 ptr: 15977 data: 0x86640080 module:  6 information type:  6 information field: 0x00040080 ts:
0x00000120D000005D
 *** FEE64 discriminator: block:  3402 ptr: 15979 data: 0x82640080 module:  2 information type:  6 information field: 0x00040080 ts:
0x00000120D000005F
 ***            ADC data: block:  3402 ptr: 15981 data: 0xC5437FC7 module: 21 fail: 0 range: 0 id:  1347 channel:  3 adc: 32711  ts:
0x00000120D0000065
 ***            ADC data: block:  3402 ptr: 15983 data: 0xC583802E module: 22 fail: 0 range: 0 id:  1411 channel:  3 adc: 32814  ts:
0x00000120D000008D
 ***            ADC data: block:  3402 ptr: 15985 data: 0xC4C37FDB module: 19 fail: 0 range: 0 id:  1219 channel:  3 adc: 32731  ts:
0x00000120C00000A0 OLD: ts: 0x00000120D000008D tag: 3 type: 0
 ***            ADC data: block:  3402 ptr: 15985 data: 0xC4C37FDB module: 19 fail: 0 range: 0 id:  1219 channel:  3 adc: 32731  ts:
0x00000120C00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15987 data: 0x8140120D module:  1 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15989 data: 0x8240120D module:  2 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15991 data: 0x8340120D module:  3 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15993 data: 0x8440120D module:  4 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15995 data: 0x8540120D module:  5 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15997 data: 0x8640120D module:  6 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 15999 data: 0x8740120D module:  7 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16001 data: 0x8840120D module:  8 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16003 data: 0x8940120D module:  9 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16005 data: 0x8A40120D module: 10 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16007 data: 0x8B40120D module: 11 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16009 data: 0x8C40120D module: 12 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16011 data: 0x8D40120D module: 13 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16013 data: 0x8E40120D module: 14 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16015 data: 0x8F40120D module: 15 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16017 data: 0x9040120D module: 16 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16019 data: 0x9140120D module: 17 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16021 data: 0x9240120D module: 18 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16023 data: 0x9340120D module: 19 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16025 data: 0x9440120D module: 20 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16027 data: 0x9540120D module: 21 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16029 data: 0x9640120D module: 22 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16031 data: 0x9740120D module: 23 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***   SYNC100 timestamp: block:  3402 ptr: 16033 data: 0x9840120D module: 24 information type:  4 information field: 0x0000120D ts:
0x00000120D00000A0
 ***            ADC data: block:  3402 ptr: 16035 data: 0xC4BA7DF1 module: 18 fail: 0 range: 0 id:  1210 channel: 58 adc: 32241  ts:
0x00000120D00000A5
 *** FEE64 discriminator: block:  3402 ptr: 16037 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120D00000A9
 *** FEE64 discriminator: block:  3402 ptr: 16039 data: 0x86640080 module:  6 information type:  6 information field: 0x00040080 ts:
0x00000120D00000AC
 ***            ADC data: block:  3402 ptr: 16041 data: 0xC5F7812E module: 23 fail: 0 range: 0 id:  1527 channel: 55 adc: 33070  ts:
0x00000120D000010D
 ***            ADC data: block:  3402 ptr: 16043 data: 0xC5467E32 module: 21 fail: 0 range: 0 id:  1350 channel:  6 adc: 32306  ts:
0x00000120D000012D
 ***            ADC data: block:  3402 ptr: 16045 data: 0xC4C4801A module: 19 fail: 0 range: 0 id:  1220 channel:  4 adc: 32794  ts:
0x00000120D0000168
 ***            ADC data: block:  3402 ptr: 16047 data: 0xC54F7E07 module: 21 fail: 0 range: 0 id:  1359 channel: 15 adc: 32263  ts:
0x00000120D00001F5
 ***            ADC data: block:  3402 ptr: 16049 data: 0xC1907F13 module:  6 fail: 0 range: 0 id:   400 channel: 16 adc: 32531  ts:
0x00000120D000021D
 ***            ADC data: block:  3402 ptr: 16051 data: 0xC1B76F59 module:  6 fail: 0 range: 0 id:   439 channel: 55 adc: 28505  ts:
0x00000120D000021D
 *** FEE64 discriminator: block:  3402 ptr: 16053 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120D0000268
 ***            ADC data: block:  3402 ptr: 16055 data: 0xC519804A module: 20 fail: 0 range: 0 id:  1305 channel: 25 adc: 32842  ts:
0x00000120D00002FD
 *** FEE64 discriminator: block:  3402 ptr: 16057 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120D0000326
 ***            ADC data: block:  3402 ptr: 16059 data: 0xC3A57F86 module: 14 fail: 0 range: 0 id:   933 channel: 37 adc: 32646  ts:
0x00000120D000037D
 ***            ADC data: block:  3402 ptr: 16061 data: 0xC5707DD1 module: 21 fail: 0 range: 0 id:  1392 channel: 48 adc: 32209  ts:
0x00000120D0000385
 ***            ADC data: block:  3402 ptr: 16063 data: 0xC5B57F01 module: 22 fail: 0 range: 0 id:  1461 channel: 53 adc: 32513  ts:
0x00000120D00003AD
 ***            ADC data: block:  3402 ptr: 16065 data: 0xC2457E6F module:  9 fail: 0 range: 0 id:   581 channel:  5 adc: 32367  ts:
0x00000120D00003BD
 *** FEE64 discriminator: block:  3402 ptr: 16067 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120D00003BD
 ***            ADC data: block:  3402 ptr: 16069 data: 0xC4C181BD module: 19 fail: 0 range: 0 id:  1217 channel:  1 adc: 33213  ts:
0x00000120D00003C0
 ***            ADC data: block:  3402 ptr: 16071 data: 0xC4ED80E8 module: 19 fail: 0 range: 0 id:  1261 channel: 45 adc: 33000  ts:
0x00000120D00003C0
 ***            ADC data: block:  3402 ptr: 16073 data: 0xC4F6812B module: 19 fail: 0 range: 0 id:  1270 channel: 54 adc: 33067  ts:
0x00000120D00003C0
 ***            ADC data: block:  3402 ptr: 16075 data: 0xC3457F08 module: 13 fail: 0 range: 0 id:   837 channel:  5 adc: 32520  ts:
0x00000120D000041D
 ***            ADC data: block:  3402 ptr: 16077 data: 0xC37C7FB1 module: 13 fail: 0 range: 0 id:   892 channel: 60 adc: 32689  ts:
0x00000120D000041D
 *** FEE64 discriminator: block:  3402 ptr: 16079 data: 0x85640080 module:  5 information type:  6 information field: 0x00040080 ts:
0x00000120D000043B
 *** FEE64 discriminator: block:  3402 ptr: 16081 data: 0x86640080 module:  6 information type:  6 information field: 0x00040080 ts:
0x00000120D000043B
 *** FEE64 discriminator: block:  3402 ptr: 16083 data: 0x81640080 module:  1 information type:  6 information field: 0x00040080 ts:
0x00000120D000043F
 *** FEE64 discriminator: block:  3402 ptr: 16085 data: 0x82640080 module:  2 information type:  6 information field: 0x00040080 ts:
0x00000120D0000440
 ***            ADC data: block:  3402 ptr: 16087 data: 0xC38A7F89 module: 14 fail: 0 range: 0 id:   906 channel: 10 adc: 32649  ts:
0x00000120D0000445
 ***            ADC data: block:  3402 ptr: 16089 data: 0xC3A68005 module: 14 fail: 0 range: 0 id:   934 channel: 38 adc: 32773  ts:
0x00000120D0000445
 ***            ADC data: block:  3402 ptr: 16091 data: 0xC3B07E25 module: 14 fail: 0 range: 0 id:   944 channel: 48 adc: 32293  ts:
0x00000120D0000445
 ***            ADC data: block:  3402 ptr: 16093 data: 0xC5737ED1 module: 21 fail: 0 range: 0 id:  1395 channel: 51 adc: 32465  ts:
0x00000120D000044D
 ***            ADC data: block:  3402 ptr: 16095 data: 0xC5A17F32 module: 22 fail: 0 range: 0 id:  1441 channel: 33 adc: 32562  ts:
0x00000120D0000475
 ***            ADC data: block:  3402 ptr: 16097 data: 0xC4FB80F3 module: 19 fail: 0 range: 0 id:  1275 channel: 59 adc: 33011  ts:
0x00000120D0000488
 ***            ADC data: block:  3402 ptr: 16099 data: 0xC37F7E9C module: 13 fail: 0 range: 0 id:   895 channel: 63 adc: 32412  ts:
0x00000120D00004E5
 ***            ADC data: block:  3402 ptr: 16101 data: 0xC1837FED module:  6 fail: 0 range: 0 id:   387 channel:  3 adc: 32749  ts:
0x00000120D000053D

Note - system-wide checks still OK despite time warp observed above
       no errors reported by merger since start of R11


Free memory before and after saving all L and H spectra to disk - see attachments 24-25
Some merger errors observed during save of all L and H spectra to disk - see attachment 26

FEE64 temperatures - Julabo FL11006 set point + 20 deg C - see attachment 27
                                    set point + 16 deg C - see attachment 28
Temperatures decrease typically ~ 2-4 deg C which implies that the coolant loop is working as expected.
However, +16 deg C is marginal due to relative humidity variations ~40-55% corresponding to Dew Point
temperatures of ~12-14 deg C. Returning Julabo FL11006 set point to +20 deg C.

16.18 R10 stops

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      From Correlation Status & Control tab change Trigger delay 0x5

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      External (random) trigger from EG&G Ortec 462 Start output (Range 81.92us) - frequency c. 120Hz

      B2F/F11 temp +25.1 deg C, d.p. +14.1 deg C, RH 51.6%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      Some error messages observed for merger - see attachment 4-10
      All related to Q5 (nnaida6)

      System-wide checks OK - see attachments 11-16

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6, nnaida5 & nnaida20
statistics - see attachments
17-25

      Analysis of R10_272 shows data synchronised - see attachment 26

      FEE # versus timestamp (0.1ms / channel)

      nnaida1 - nnaid24 (stat) hit patterns - see attachments 27-28

aidas1> ./analyser2 /TapeData/Aug2016/R10_272
 *** GREAT format 3.2.0 analyser - TD - May 2014
 *** FEE64 discriminator: block: 15670 ptr:  2407 data: 0x81640080 module:  1 information type:  6 information
field: 0x00040080 ts: 0x000007BD800000A0 OLD: ts: 0x000007BD9000009E tag: 2 type: 6
 *** ERROR: READ I/O error:       5002
                   blocks:      24294
          ADC data format:   57829496 (  296793.6 Hz)
        Other data format:  140380504 (  720463.4 Hz)
 Sample trace data format:          0 (       0.0 Hz)
         Undefined format:          0 (       0.0 Hz)
   Other data format type:      PAUSE:         59 (       0.3 Hz)
                               RESUME:         59 (       0.3 Hz)
                              SYNC100:    1783050 (    9151.0 Hz)
                           FEE64 disc:  138570073 (  711171.8 Hz)
                             MBS info:      27263 (     139.9 Hz)
                           Other info:          0 (       0.0 Hz)

   ADC data range bit set:       9410 (      48.3 Hz)

                Timewarps:        ADC:          0 (       0.0 Hz)
                                PAUSE:          0 (       0.0 Hz)
                               RESUME:          0 (       0.0 Hz)
                              SYNC100:          0 (       0.0 Hz)
                           FEE64 disc:          1 (       0.0 Hz)
                             MBS info:          0 (       0.0 Hz)
                            Undefined:          0 (       0.0 Hz)
                         Sample trace:          0 (       0.0 Hz)

 Timestamp elapsed time:      194.848 s
 FEE module #:   1 elapsed dead time       0.210 s
 FEE module #:   2 elapsed dead time       0.261 s
 FEE module #:   3 elapsed dead time       0.000 s
 FEE module #:   4 elapsed dead time       0.000 s
 FEE module #:   5 elapsed dead time       0.206 s
 FEE module #:   6 elapsed dead time       0.857 s
 FEE module #:   7 elapsed dead time       0.000 s
 FEE module #:   8 elapsed dead time       0.000 s
 FEE module #:   9 elapsed dead time       0.000 s
 FEE module #:  10 elapsed dead time       0.000 s
 FEE module #:  11 elapsed dead time       0.000 s
 FEE module #:  12 elapsed dead time       0.000 s
 FEE module #:  13 elapsed dead time       0.000 s
 FEE module #:  14 elapsed dead time       0.055 s
 FEE module #:  15 elapsed dead time       0.000 s
 FEE module #:  16 elapsed dead time       0.000 s
 FEE module #:  17 elapsed dead time       0.027 s
 FEE module #:  18 elapsed dead time       0.000 s
 FEE module #:  19 elapsed dead time       0.000 s
 FEE module #:  20 elapsed dead time       0.000 s
 FEE module #:  21 elapsed dead time       0.000 s
 FEE module #:  22 elapsed dead time       0.013 s
 FEE module #:  23 elapsed dead time       0.000 s
 FEE module #:  24 elapsed dead time       0.000 s
 FEE module #:  25 elapsed dead time       0.000 s
 FEE module #:  26 elapsed dead time       0.000 s
 FEE module #:  27 elapsed dead time       0.000 s
 FEE module #:  28 elapsed dead time       0.000 s
 FEE module #:  29 elapsed dead time       0.000 s
 FEE module #:  30 elapsed dead time       0.000 s
 FEE module #:  31 elapsed dead time       0.000 s
 FEE module #:  32 elapsed dead time       0.000 s

 *** Program elapsed time:   11.883s ( 2044.465 blocks/s, 127.779 Mb/s)

nnaida19 restored to configuration - /MIDAS/Aida/tclhttpd/aidas1/startup.tcl - see attachment 1

Latest version of firmware loaded - /MIDAS/Aida/FEE_GF_Feb16_21.bin

System power-cycled

ASIC settings 2016Aug20-15.34.53

slow comparator 0x20
LEC/MEC fast comparator 0xff

discriminator mask -> 0x0

All system-wide checks OK *except* nnaida19 fails ASIC clock timestamp synchronisation

Per the instructions provided by https://elog.ph.ed.ac.uk/AIDA/331 added Servisol Heat Sink Compound
to each of the 24x FEE64s currently installed (plus spare FEE module stored in the B3F AIDA storage
area).

Before adding the Servisol Heat Sink Compound - https://elog.ph.ed.ac.uk/AIDA/349 (attachment 3)

After adding the Servisol Heat Sink Compound - see attachment 1

With exception of nnaida8 & nnaida10 Virtex temperatures now ~ +44-55 deg C cf. ~ +55-70 deg C 

nnaida6 shows an increase in temperature for the PSU from ~ +35 deg C to ~ +40 deg C

All system-wide checks OK

Rate hit patterns for nnaida1-nnaida24 - see attachments 2-3
Should show uniform rate ~130Hz for all channels
Observe some channels are missing

N.B. 1x AIDA adaptor PCB rev D replaced by spare due to (single) bent ERNI pin
     All ERNI connectors of all AIDA adaptor PCBs checked before re-installation of FEE modules
     - it is possible that there are other AIDA adaptor PCBs with bent pins
     - the system is currently fairly noisy and this could be an alternative explanation of missing channels
 

16.55 R10

      FEE64 configuration includes nnaida19

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      External (random) trigger from EG&G Ortec 462 Start output (Range 81.92us) - frequency c. 120Hz

      B2F/F11 temp +25.0 deg C, d.p. +14.3 deg C, RH 51.6% (Julabo FL11006 set point +20 deg C)

      FEE64 temperatures - attachment 6

10.11 R9 continues

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      External (random) trigger from EG&G Ortec 462 Start output (Range 81.92us) - frequency c. 120Hz

      B2F/F11 temp +24.8 deg C, d.p. +12.9 deg C, RH 46.8%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      Some error messages observed for merger - see attachment 4-12
      All related to Q5 (nnaida6)

      System-wide checks OK - see attachments 13-18

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6, nnaida5 & nnaida20
statistics - see attachments
19-28

      Analysis of R9_561 shows data synchronised - see attachmen

      FEE # versus timestamp (0.1ms / channel)
      Note nnaida19 not currently configured

10.49 R9 stops

11.40 R9 continues

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      External (random) trigger from EG&G Ortec 462 Start output (Range 81.92us) - frequency c. 120Hz

      B2F/F11 temp +25.2 deg C, d.p. +14.5 deg C, RH 50.4%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      Some error messages observed for merger - see attachment 4-6
      All related to Q5 (nnaida6)

      System-wide checks OK - see attachments 7-12

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6, nnaida5 & nnaida20
statistics - see attachments
13-20

      Analysis of R9_213 shows data synchronised - see attachment 21

      FEE # versus timestamp (0.1ms / channel)
      Note nnaida19 not currently configured

11.40 R8 continues

      B2F/FF temp +25 deg C, d.p. +14 deg C, RH 51%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3
      System-wide checks OK - see attachments 4-9

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics - see attachments
10-16

      Some error messages observed for merger - see attachment 17-18
      All related to Q5 (nnaida6)

      Analysis of R8_231 shows data synchronised 

18.07 R8 stops

      At end of run (file R8_310) BNC PB-4 pulser ref switch INT -> EXT to check for possible skew in data
synchronisation

      Analysis of R8_310 shows no evidence of skew, i.e. all FEE64s are observed to stop producing pulser events
at same time

19.21 R9 starts

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      ASIC Control -> Check ASIC Control required after DAQ GO

      BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      System-wide checks OK - see attachments 19-24
      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics x2 - see attachments
25-32
      

09.50 DAQ found stopped
      No error messages merge/tapeserver - see attachments 1-2
      Most recent data file R7_107 last written to 08.13 23.8.16

10.00 Electrical power to AIDA is off for reasons unknown (power saving/maintenance/trip)
      3-ph circuit to Julabo FL1106 recirculating chiller is unaffected

10.20 Analysis of R7_107 (most recent data file) shows data synchronised OK 

11.30 Yoshida-san informs us that the experimental power to F11 is off for annual inspection/maintenance.
      Power should be restored this evening, or possibly, sometime tomorrow.

19.00 Power restored

      FEE64 power *off* - as expected following power outage
      Detector bias *off* - as expected following power outage

      Startup AIDA
      System wide checks, FEE64 temperatures and DSSSD bias/leakage currents - see attachments 3-11

19.24 R8 starts

      slow comparator 0x10
      LEC/MEC fast comparator 0xff

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse

19.31 AIDA SYNC, PAUSE, RESUME, SYNCtime warp, Good data etc statistics - see attachments 12-18

> 11.00 Restore power to AIDA following Saturday's shutdoen in preparation for the planned maintenance
>       outage on Sunday.
> 
>       Restart Julabo FL11006 chiller - set point +20 deg C
>       Restart AIDA
> 
>       Temperature +24.3 deg C, DP +15.2 deg C, RH 57.5%
> 
>       DSSSD #1-6 bias - see attachments 1-2
>      
>       FEE64 temperatures - attachment 3
> 
>       System-wide checks - see attachments 4-8
>       Note SYNC pulses received by *all* slave FEE64s = SYNC pulses sent by master FEE64 (nnaida6)
> 
> 11.35 R6 starts
>       slow comparator 0x10
>       LEC/MEC fast comparator 0x10
> 
>       All FEE64 discriminator masks -> 0x0
> 
>       observe very high rates (~400-500kHz/FEE64) from majority ofp+n junction FEE64s
> 
>       LEC/MEC fast comparator -> 0xff
> 
> 18.45 DAQ running OK
>       No merger error messages since change of LEC/MEC fast comparator threshold -> 0xff
>       Offline analysis of R6_79 confirms that all FEE64s are synchronised
> 
>       Added correlation trigger input
>       BNC PB-4 Pulser trigger output -> Ortec SCA + NIM output width 0.5us -> LeCroy 429A -> root MACB trigger
> #4 input
> 
> 21.05 R7 starts
> 
>       Attachments 9-16 show FEE64 temperatures and results of each system-wide check. 
> 
>       Note the result of the Master Timestamp Control -> Check Clock Lock States 
>       indicating clock state *not* locked
> 
>       slow comparator 0x10
>       LEC/MEC fast comparator 0xff
>       All FEE64 discriminator masks -> 0x0

The status is OK. I changed the system wide check to reflect the new value but forgot about the individual check.
I will update the software.
Note attachment 5 shows all is well.

Updated version of /MIDAS/TclHttpd/Html/AIDA/MasterTS/MasterTS.tcl installed with correction.

Logged into aidas1, installed AidaExecV8 with a test of the time difference between SYNC data items. Failure to be 0x40000 clocks will cause a statistic to be incremented. "SYNC Time Warp"

Installed updated versions of /MIDAS/TclHttpd/Html/AIDA/RunControl/sys.tcl and /MIDAS/TclHttpd/Html/AIDA/RunControl/implementation.tcl to allow latest System Wide Check to operate.

Installed updated versions of Check.tcl/.js/tml into /MIDAS/TclHttpd/Html/AIDA/Check/

Checked all the /MIDAS/linux-ppc_4xx/startup files including aidacommon for entries relating to the flush and push rates. Only aidacommon has an entry as required. Currently both are set to 30.

Changed the /etc/sysctl.conf file in each of the 32 root file systems (rfs) in /MIDAS/XilinxLinux/ppc_4xx/rfs/nnaida##/ to add the line "vm.min_free_kbytes=4096".

The changes will take effect from the next power-cycle of the FEEs and "reset" of the browser windows on the server.

11.00 Restore power to AIDA following Saturday's shutdoen in preparation for the planned maintenance
      outage on Sunday.

      Restart Julabo FL11006 chiller - set point +20 deg C
      Restart AIDA

      Temperature +24.3 deg C, DP +15.2 deg C, RH 57.5%

      DSSSD #1-6 bias - see attachments 1-2
     
      FEE64 temperatures - attachment 3

      System-wide checks - see attachments 4-8
      Note SYNC pulses received by *all* slave FEE64s = SYNC pulses sent by master FEE64 (nnaida6)

11.35 R6 starts
      slow comparator 0x10
      LEC/MEC fast comparator 0x10

      All FEE64 discriminator masks -> 0x0

      observe very high rates (~400-500kHz/FEE64) from majority ofp+n junction FEE64s

      LEC/MEC fast comparator -> 0xff

18.45 DAQ running OK
      No merger error messages since change of LEC/MEC fast comparator threshold -> 0xff
      Offline analysis of R6_79 confirms that all FEE64s are synchronised

      Added correlation trigger input
      BNC PB-4 Pulser trigger output -> Ortec SCA + NIM output width 0.5us -> LeCroy 429A -> root MACB trigger
#4 input

21.05 R7 starts

      Attachments 9-16 show FEE64 temperatures and results of each system-wide check. 

      Note the result of the Master Timestamp Control -> Check Clock Lock States 
      indicating clock state *not* locked

      slow comparator 0x10
      LEC/MEC fast comparator 0xff
      All FEE64 discriminator masks -> 0x0

> > > 
> > > 14.00 Both AIDA NIM bins U/S 
> > >       Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
> > >       Lower NIM bin - 11x MACB - not powering up
> > > 
> > >       Replaced both NIM bins.
> > >       Upper NIM bin - 11x MACB
> > >       Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
> > > 
> > > 15.50 Julabo FL11006 chiller ON - set point +20 deg C
> > >       B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
> > > 
> > >       Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
> > > 
> > > 16.10 Startup DAQ nnaida1-24 *except* nnaida19
> > > 
> > >       System-wide checks
> > > 
> > >       Check clock status OK
> > >       Check ADC calibration - nnaida7 failed
> > >       Check ASIC clock timestamp - multiple failures - see attachment 3
> > >       Check SYNC errors not counted Since Baseline - see attachment 4
> > >       Check SYNC pulses received - see attachment 5
> > > 
> > >       BNC PB-4 
> > > 
> > >       Amplitude 90,000, x5 attenuator IN
> > >       t_r 50ns, tau_d 50us
> > >       Polarity -
> > >       INT ref, delay MIN, tail pulse
> > > 
> > >       FEE64 temperatures - see attachment 6
> > > 
> > > 16.34 R1 starts (directory Aug2016)
> > > 
> > >       slow comparator 0x10, LEC/MEC fast comparator 0x10
> > > 
> > >       merge 555k data items/s, tapeserver 4430 kb/s
> > Looks like a problem with the inter-MACB wiring.
> > The screen shots show groups of 4 with the problems.
> > I suggest re-seating the short HDMI cables and reset the system.
> 
> Short HDMI cables re-seated. See attachment 1

ok, the discrepancy is odd. Not sure if it is due to an uneven reset or more noise in the wiring.
In system wide checks redo the baseline for the SYNC error counters and keep an eye on it.

Maybe a power cycle will bring all the SYNC received counters into line.

Certainly they should be exactly the same.

Is there any correlation between the ones that are wrong and the MACB layout/cabling ?

> > 
> > 14.00 Both AIDA NIM bins U/S 
> >       Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
> >       Lower NIM bin - 11x MACB - not powering up
> > 
> >       Replaced both NIM bins.
> >       Upper NIM bin - 11x MACB
> >       Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
> > 
> > 15.50 Julabo FL11006 chiller ON - set point +20 deg C
> >       B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
> > 
> >       Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
> > 
> > 16.10 Startup DAQ nnaida1-24 *except* nnaida19
> > 
> >       System-wide checks
> > 
> >       Check clock status OK
> >       Check ADC calibration - nnaida7 failed
> >       Check ASIC clock timestamp - multiple failures - see attachment 3
> >       Check SYNC errors not counted Since Baseline - see attachment 4
> >       Check SYNC pulses received - see attachment 5
> > 
> >       BNC PB-4 
> > 
> >       Amplitude 90,000, x5 attenuator IN
> >       t_r 50ns, tau_d 50us
> >       Polarity -
> >       INT ref, delay MIN, tail pulse
> > 
> >       FEE64 temperatures - see attachment 6
> > 
> > 16.34 R1 starts (directory Aug2016)
> > 
> >       slow comparator 0x10, LEC/MEC fast comparator 0x10
> > 
> >       merge 555k data items/s, tapeserver 4430 kb/s
> Looks like a problem with the inter-MACB wiring.
> The screen shots show groups of 4 with the problems.
> I suggest re-seating the short HDMI cables and reset the system.

Short HDMI cables re-seated. See attachment 1

> 
> 14.00 Both AIDA NIM bins U/S 
>       Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
>       Lower NIM bin - 11x MACB - not powering up
> 
>       Replaced both NIM bins.
>       Upper NIM bin - 11x MACB
>       Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B
> 
> 15.50 Julabo FL11006 chiller ON - set point +20 deg C
>       B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C
> 
>       Bias 6x MSL type BB18 DSSSDs - see attachments 1-2
> 
> 16.10 Startup DAQ nnaida1-24 *except* nnaida19
> 
>       System-wide checks
> 
>       Check clock status OK
>       Check ADC calibration - nnaida7 failed
>       Check ASIC clock timestamp - multiple failures - see attachment 3
>       Check SYNC errors not counted Since Baseline - see attachment 4
>       Check SYNC pulses received - see attachment 5
> 
>       BNC PB-4 
> 
>       Amplitude 90,000, x5 attenuator IN
>       t_r 50ns, tau_d 50us
>       Polarity -
>       INT ref, delay MIN, tail pulse
> 
>       FEE64 temperatures - see attachment 6
> 
> 16.34 R1 starts (directory Aug2016)
> 
>       slow comparator 0x10, LEC/MEC fast comparator 0x10
> 
>       merge 555k data items/s, tapeserver 4430 kb/s
Looks like a problem with the inter-MACB wiring.
The screen shots show groups of 4 with the problems.
I suggest re-seating the short HDMI cables and reset the system.

14.00 Both AIDA NIM bins U/S 
      Upper NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B - ac mains fuse 100V/8A/slow? blowing
      Lower NIM bin - 11x MACB - not powering up

      Replaced both NIM bins.
      Upper NIM bin - 11x MACB
      Lower NIM bin - BNC PB-4, Ortec 433, 2x CAEN N1419, 1x CAEN N1419B

15.50 Julabo FL11006 chiller ON - set point +20 deg C
      B2F/F11 ambient temp +24.0 deg C, RH 54%, DP +13.8 deg C

      Bias 6x MSL type BB18 DSSSDs - see attachments 1-2

16.10 Startup DAQ nnaida1-24 *except* nnaida19

      System-wide checks

      Check clock status OK
      Check ADC calibration - nnaida7 failed
      Check ASIC clock timestamp - multiple failures - see attachment 3
      Check SYNC errors not counted Since Baseline - see attachment 4
      Check SYNC pulses received - see attachment 5

      BNC PB-4 

      Amplitude 90,000, x5 attenuator IN
      t_r 50ns, tau_d 50us
      Polarity -
      INT ref, delay MIN, tail pulse

      FEE64 temperatures - see attachment 6

16.34 R1 starts (directory Aug2016)

      slow comparator 0x10, LEC/MEC fast comparator 0x10

      merge 555k data items/s, tapeserver 4430 kb/s

18.28 R4 starts

      Settings per R1

18.31 DAQ/merge stalls with (many) messages as follows

MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
Merge state now Paused
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in pending data, found 1146,
last 575
copyItems: queue 14, maybe copied in wrong buffer: sequence 1146, last 575
Merge_addItems: queue 14, maybe added wrong buffer: sequence 1146, last 575
MERGE Program (24316): check_for_data: index 14, unexpected header sequence number in new data, found 689, last 1258
copyItems: queue 14, maybe copied in wrong buffer: sequence 689, last 1258
Merge_addItems: queue 14, maybe added wrong buffer: sequence 689, last 1258
MERGE Data Link (24254): client closed connection
MERGE Data Link (24254): listening on port 11001
MERGE Data Link (24255): client closed connection
MERGE Data Link (24255): listening on port 11002
MERGE Data Link (24257): client closed connection
MERGE Data Link (24257): listening on port 11004
MERGE Data Link (24258): client closed connection
MERGE Data Link (24258): listening on port 11005
MERGE Data Link (24261): client closed connection
MERGE Data Link (24261): listening on port 11008
MERGE Data Link (24260): client closed connection
MERGE Data Link (24260): listening on port 11007
MERGE Data Link (24259): client closed connection
MERGE Data Link (24259): listening on port 11006
MERGE Data Link (24256): client closed connection
MERGE Data Link (24256): listening on port 11003
MERGE Data Link (24262): client closed connection
MERGE Data Link (24262): listening on port 11009
MERGE Data Link (24263): client closed connection
MERGE Data Link (24263): listening on port 11010
MERGE Data Link (24265): client closed connection
MERGE Data Link (24265): listening on port 11012
MERGE Data Link (24266): client closed connection
MERGE Data Link (24266): listening on port 11013
MERGE Data Link (24267): client closed connection
MERGE Data Link (24267): listening on port 11014
MERGE Data Link (24269): client closed connection
MERGE Data Link (24269): listening on port 11016
MERGE Data Link (24268): client closed connection
MERGE Data Link (24268): listening on port 11015
MERGE Data Link (24270): client closed connection
MERGE Data Link (24270): listening on port 11017
MERGE Data Link (24264): client closed connection
MERGE Data Link (24264): listening on port 11011
MERGE Data Link (24273): client closed connection
MERGE Data Link (24273): listening on port 11020
MERGE Data Link (24271): client closed connection
MERGE Data Link (24271): listening on port 11018
MERGE Data Link (24277): client closed connection
MERGE Data Link (24277): listening on port 11024
MERGE Data Link (24275): client closed connection
MERGE Data Link (24275): listening on port 11022
MERGE Data Link (24274): client closed connection
MERGE Data Link (24274): listening on port 11021
MERGE Data Link (24276): client closed connection
MERGE Data Link (24276): listening on port 11023

Due to sometimes operating with very noisy systems, both at Daresbury and RIKEN, I have installed a change to the startup of the system.

The Runcontrol GO button now only starts the output of SYNC pulses. A further button labelled "Start ASIC Readout" ( see attached photo ) needs to be pressed to start the ASIC ADC, Discriminator and Correlation readout.

After carrying out the normal operations to start the system and pressing the GO button the Merger can be checked to be certain it is merging the events. Since there are only SYNC pulses it should soon be apparent if this is not happening and appropriate actions can be taken. ( Kill/Reload the Link and Merger processes using the "Merger for AIDA" icon at the top of the screen is one way. )

Once it is certain the merging is in progress then the new button labelled "Start ASIC Readout" ( see attached photo ) needs to be pressed to start the ASIC ADC, Discriminator and Correlation readout.

This must be done after every GO.

The problem indicated by "page allocation failure" and the kernal subsequently "killing" the AidaExecV8 process is due ( it appears ) to memory availability.

Solution 1:- Reduce the amount of memory used for histogramming. That would be by disabling the .V histograms or changing the size of the .H and/or .L histograms from 65536 to 32768 and using the shift attribute in the Options. This will reduce the memory required.

Solution 2:- Change a kernal setting in the /etc/sysctl.conf to request there is always a minimum amount of free memory. Insert the line "vm.min_free_kbytes=4096" in the file.

Solution 2 has been tried on the system in T9 while the flag enabling raw data to be written to disc is set. Previous to the solution, with the same operating conditions,  the fault would occur after about 15 minutes. Subsequent to the solution the system has run for 46 hours.

I propose that the .V histograms are disabled and the kernal setting is used. ( both solutions :-) The .V histograms are a late addition and not required at present.

The problem :-

The DAQ stops working and can only be fixed by a reboot of the FEE64s.

The Candidate:-

The DAQ program running in the FEE64s which handles the transfer of the data items from the FPGA to the Merger, AidaExecV8, uses a device driver, aidamem, to copy the data from DMA memory into Linux memory.

Sometimes AidaExecV8 can be killed by the Kernal due to a "page allocation failure" which occurs when the Kernal memory space has become fragmented. So when a block of contiguous memory is requested to receive the copy of the data from the FPGA DMA memory the Kernal can't allocate memory and kills the process.

The effect of this would be seen at the Merger where it would be waiting for data from the FEE.

Since the AidaExecV8 has been killed then there will be no response to status requests.

A recent change to the operation of the Aida system , flushing buffers regularly, is the most likely cuplrit. The flush of the buffers on a slow FEE will use small memory blocks while faster FEE data will always require full size buffers and mean that the Kernal memory will have large contiguous areas of memory in constant use. This will explain why this failure type is relatively recent .

A solution :- Change the request for memory copy to always use the maximum size. This way there shouldn't be the fragmentation of the memory. Also the fragmentation of memory will be investigated to see if there is a away to monitor it.

Some corroboration:-

The error messages from the Kernal that indicate this has fault has occured can be read from the FEE64 root file system. At the text file /var/log/messages. A grep of these in RIKEN using the phrase "page allocation failure" shows they have occured. It remains to see if the date and times of the failures align with the date and times of the system failure.